linux-media.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Brad Love <brad@nextdimension.cc>
To: Sean Young <sean@mess.org>, Brad Love <brad@nextdimension.cc>
Cc: linux-media@vger.kernel.org
Subject: Re: [PATCH v2 05/12] si2157: Add analog tuning related functions
Date: Mon, 8 Apr 2019 13:18:35 -0500	[thread overview]
Message-ID: <e153da04-65c0-f582-70f1-243657401af2@nextdimension.cc> (raw)
In-Reply-To: <20190405132406.gj2vzxdsvjv7yejy@gofer.mess.org>


On 05/04/2019 08.24, Sean Young wrote:
> On Wed, Feb 27, 2019 at 12:27:39PM -0600, Brad Love wrote:
>> Include set_analog_params, get_frequency, and get_bandwidth.
>>
>> Tested with NTSC and PAL standards via ch3/4 generator. Other standards
>> are included, but are untested due to lack of generator.
> There are quite a few warnings from checkpatch on this patch. Please
> run patches through "./scripts/checkpatch.pl --strict" before submitting.
>
> Generally there should be no output from checkpatch if possible.

Hi Sean,

Kernel patch guidelines suggest ./scripts/checkpatch.pl without
--strict, so that is what I've always used. I have no problems switching
to strict from now on.

Regards,

Brad


> Thanks
>
> Sean
>
>> Signed-off-by: Brad Love <brad@nextdimension.cc>
>> ---
>> Changes since v1:
>> - remove __func__ from dev_dbg macros
>>
>>  drivers/media/tuners/si2157.c      | 245 ++++++++++++++++++++++++++++++++++++-
>>  drivers/media/tuners/si2157_priv.h |   2 +
>>  2 files changed, 244 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/media/tuners/si2157.c b/drivers/media/tuners/si2157.c
>> index f3a60a1..1006172 100644
>> --- a/drivers/media/tuners/si2157.c
>> +++ b/drivers/media/tuners/si2157.c
>> @@ -371,7 +371,7 @@ static int si2157_set_params(struct dvb_frontend *fe)
>>  	if (ret)
>>  		goto err;
>>  
>> -	/* set if frequency if needed */
>> +	/* set digital if frequency if needed */
>>  	if (if_frequency != dev->if_frequency) {
>>  		memcpy(cmd.args, "\x14\x00\x06\x07", 4);
>>  		cmd.args[4] = (if_frequency / 1000) & 0xff;
>> @@ -385,7 +385,7 @@ static int si2157_set_params(struct dvb_frontend *fe)
>>  		dev->if_frequency = if_frequency;
>>  	}
>>  
>> -	/* set frequency */
>> +	/* set digital frequency */
>>  	memcpy(cmd.args, "\x41\x00\x00\x00\x00\x00\x00\x00", 8);
>>  	cmd.args[4] = (c->frequency >>  0) & 0xff;
>>  	cmd.args[5] = (c->frequency >>  8) & 0xff;
>> @@ -397,18 +397,254 @@ static int si2157_set_params(struct dvb_frontend *fe)
>>  	if (ret)
>>  		goto err;
>>  
>> +	dev->bandwidth = bandwidth;
>> +	dev->frequency = c->frequency;
>> +
>> +	return 0;
>> +err:
>> +	dev->bandwidth = 0;
>> +	dev->frequency = 0;
>> +	dev->if_frequency = 0;
>> +	dev_dbg(&client->dev, "failed=%d\n", ret);
>> +	return ret;
>> +}
>> +
>> +static int si2157_set_analog_params(struct dvb_frontend *fe,
>> +				      struct analog_parameters *params)
>> +{
>> +	struct i2c_client *client = fe->tuner_priv;
>> +	struct si2157_dev *dev = i2c_get_clientdata(client);
>> +	char *std; /* for debugging */
>> +	int ret;
>> +	struct si2157_cmd cmd;
>> +	u32 bandwidth = 0;
>> +	u32 if_frequency = 0;
>> +	u32 freq = 0;
>> +	u64 tmp_lval = 0;
>> +	u8 system = 0;
>> +	u8 color = 0;    /* 0=NTSC/PAL, 0x10=SECAM */
>> +	u8 invert_analog = 1; /* analog tuner spectrum; 0=normal, 1=inverted */
>> +
>> +	if (dev->chiptype != SI2157_CHIPTYPE_SI2157) {
>> +		dev_info(&client->dev, "Analog tuning not supported for chiptype=%u\n",
>> +				dev->chiptype);
>> +		ret = -EINVAL;
>> +		goto err;
>> +	}
>> +
>> +	if (!dev->active)
>> +		si2157_init(fe);
>> +
>> +	if (!dev->active) {
>> +		ret = -EAGAIN;
>> +		goto err;
>> +	}
>> +	if (params->mode == V4L2_TUNER_RADIO) {
>> +	/*
>> +	 * std = "fm";
>> +	 * bandwidth = 1700000; //best can do for FM, AGC will be a mess though
>> +	 * if_frequency = 1250000;  //HVR-225x(saa7164), HVR-12xx(cx23885)
>> +	 * if_frequency = 6600000;  //HVR-9xx(cx231xx)
>> +	 * if_frequency = 5500000;  //HVR-19xx(pvrusb2)
>> +	 */
>> +		dev_err(&client->dev, "si2157 does not currently support FM radio\n");
>> +		ret = -EINVAL;
>> +		goto err;
>> +	}
>> +	tmp_lval = params->frequency * 625LL;
>> +	do_div(tmp_lval, 10); /* convert to HZ */
>> +	freq = (u32)tmp_lval;
>> +
>> +	if (freq < 1000000) /* is freq in KHz */
>> +		freq = freq * 1000;
>> +	dev->frequency = freq;
>> +
>> +	/* if_frequency values based on tda187271C2 */
>> +	if (params->std & (V4L2_STD_B|V4L2_STD_GH)) {
>> +		if (freq >= 470000000) {
>> +			std = "palGH";
>> +			bandwidth = 8000000;
>> +			if_frequency = 6000000;
>> +			system = 1;
>> +			if (params->std & (V4L2_STD_SECAM_G|V4L2_STD_SECAM_H)) {
>> +				std = "secamGH";
>> +				color = 0x10;
>> +			}
>> +		} else {
>> +			std = "palB";
>> +			bandwidth = 7000000;
>> +			if_frequency = 6000000;
>> +			system = 0;
>> +			if (params->std & V4L2_STD_SECAM_B) {
>> +				std = "secamB";
>> +				color = 0x10;
>> +			}
>> +		}
>> +	} else if (params->std & V4L2_STD_MN) {
>> +		std = "MN";
>> +		bandwidth = 6000000;
>> +		if_frequency = 5400000;
>> +		system = 2;
>> +	} else if (params->std & V4L2_STD_PAL_I) {
>> +		std = "palI";
>> +		bandwidth = 8000000;
>> +		if_frequency = 7250000; /* TODO: does not work yet */
>> +		system = 4;
>> +	} else if (params->std & V4L2_STD_DK) {
>> +		std = "palDK";
>> +		bandwidth = 8000000;
>> +		if_frequency = 6900000; /* TODO: does not work yet */
>> +		system = 5;
>> +		if (params->std & V4L2_STD_SECAM_DK) {
>> +			std = "secamDK";
>> +			color = 0x10;
>> +		}
>> +	} else if (params->std & V4L2_STD_SECAM_L) {
>> +		std = "secamL";
>> +		bandwidth = 8000000;
>> +		if_frequency = 6750000; /* TODO: untested */
>> +		system = 6;
>> +		color = 0x10;
>> +	} else if (params->std & V4L2_STD_SECAM_LC) {
>> +		std = "secamL'";
>> +		bandwidth = 7000000;
>> +		if_frequency = 1250000; /* TODO: untested */
>> +		system = 7;
>> +		color = 0x10;
>> +	} else {
>> +		std = "unknown";
>> +	}
>> +	/* calc channel center freq */
>> +	freq = freq - 1250000 + (bandwidth/2);
>> +
>> +	dev_dbg(&client->dev,
>> +			"mode=%d system=%u std='%s' params->frequency=%u center freq=%u if=%u bandwidth=%u\n",
>> +			params->mode, system, std, params->frequency,
>> +			freq, if_frequency, bandwidth);
>> +
>> +	/* set analog IF port */
>> +	memcpy(cmd.args, "\x14\x00\x03\x06\x08\x02", 6);
>> +	/* in using dev->if_port, we assume analog and digital IF's */
>> +	/*  are always on different ports */
>> +	/* assumes if_port definition is 0 or 1 for digital out */
>> +	cmd.args[4] = (dev->if_port == 1)?8:10;
>> +	cmd.args[5] = (dev->if_port == 1)?2:1; /* Analog AGC assumed external */
>> +	cmd.wlen = 6;
>> +	cmd.rlen = 4;
>> +	ret = si2157_cmd_execute(client, &cmd);
>> +	if (ret)
>> +		goto err;
>> +
>> +	/* set analog IF output config */
>> +	memcpy(cmd.args, "\x14\x00\x0d\x06\x94\x64", 6);
>> +	cmd.wlen = 6;
>> +	cmd.rlen = 4;
>> +	ret = si2157_cmd_execute(client, &cmd);
>> +	if (ret)
>> +		goto err;
>> +
>> +	/* make this distinct from a digital IF */
>> +	dev->if_frequency = if_frequency | 1;
>> +
>> +	/* calc and set tuner analog if center frequency */
>> +	if_frequency = if_frequency + 1250000 - (bandwidth/2);
>> +	dev_dbg(&client->dev, "IF Ctr freq=%d\n", if_frequency);
>> +
>> +	memcpy(cmd.args, "\x14\x00\x0C\x06", 4);
>> +	cmd.args[4] = (if_frequency / 1000) & 0xff;
>> +	cmd.args[5] = ((if_frequency / 1000) >> 8) & 0xff;
>> +	cmd.wlen = 6;
>> +	cmd.rlen = 4;
>> +	ret = si2157_cmd_execute(client, &cmd);
>> +	if (ret)
>> +		goto err;
>> +
>> +	/* set analog AGC config */
>> +	memcpy(cmd.args, "\x14\x00\x07\x06\x32\xc8", 6);
>> +	cmd.wlen = 6;
>> +	cmd.rlen = 4;
>> +	ret = si2157_cmd_execute(client, &cmd);
>> +	if (ret)
>> +		goto err;
>> +
>> +	/* set analog video mode */
>> +	memcpy(cmd.args, "\x14\x00\x04\x06\x00\x00", 6);
>> +	cmd.args[4] = system | color;
>> +#if 1 /* can use dev->inversion if assumed it applies to both digital/analog */
>> +	if (invert_analog)
>> +		cmd.args[5] |= 0x02;
>> +#else
>> +	if (dev->inversion)
>> +		cmd.args[5] |= 0x02;
>> +#endif
>> +	cmd.wlen = 6;
>> +	cmd.rlen = 1;
>> +	ret = si2157_cmd_execute(client, &cmd);
>> +	if (ret)
>> +		goto err;
>> +
>> +	/* set analog frequency */
>> +	memcpy(cmd.args, "\x41\x01\x00\x00\x00\x00\x00\x00", 8);
>> +	cmd.args[4] = (freq >>  0) & 0xff;
>> +	cmd.args[5] = (freq >>  8) & 0xff;
>> +	cmd.args[6] = (freq >> 16) & 0xff;
>> +	cmd.args[7] = (freq >> 24) & 0xff;
>> +	cmd.wlen = 8;
>> +	cmd.rlen = 1;
>> +	ret = si2157_cmd_execute(client, &cmd);
>> +	if (ret)
>> +		goto err;
>> +
>> +#if 0 /* testing */
>> +	/* get tuner status, RSSI values */
>> +	memcpy(cmd.args, "\x42\x01", 2);
>> +	cmd.wlen = 2;
>> +	cmd.rlen = 12;
>> +	ret = si2157_cmd_execute(client, &cmd);
>> +
>> +	dev_info(&client->dev, "tuner status: ret=%d rssi=%d mode=%x freq=%d\n",
>> +		ret, cmd.args[3], cmd.args[8],
>> +		(cmd.args[7]<<24 | cmd.args[6]<<16 |
>> +		cmd.args[5]<<8 | cmd.args[4]));
>> +#endif
>> +	dev->bandwidth = bandwidth;
>> +
>>  	return 0;
>>  err:
>> +	dev->bandwidth = 0;
>> +	dev->frequency = 0;
>> +	dev->if_frequency = 0;
>>  	dev_dbg(&client->dev, "failed=%d\n", ret);
>>  	return ret;
>>  }
>>  
>> +static int si2157_get_frequency(struct dvb_frontend *fe, u32 *frequency)
>> +{
>> +	struct i2c_client *client = fe->tuner_priv;
>> +	struct si2157_dev *dev = i2c_get_clientdata(client);
>> +
>> +	*frequency = dev->frequency;
>> +	dev_dbg(&client->dev, "freq=%u\n", dev->frequency);
>> +	return 0;
>> +}
>> +
>> +static int si2157_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
>> +{
>> +	struct i2c_client *client = fe->tuner_priv;
>> +	struct si2157_dev *dev = i2c_get_clientdata(client);
>> +
>> +	*bandwidth = dev->bandwidth;
>> +	dev_dbg(&client->dev, "bandwidth=%u\n", dev->bandwidth);
>> +	return 0;
>> +}
>> +
>>  static int si2157_get_if_frequency(struct dvb_frontend *fe, u32 *frequency)
>>  {
>>  	struct i2c_client *client = fe->tuner_priv;
>>  	struct si2157_dev *dev = i2c_get_clientdata(client);
>>  
>> -	*frequency = dev->if_frequency;
>> +	*frequency = dev->if_frequency & ~1; /* strip analog IF indicator bit */
>> +	dev_dbg(&client->dev, "if_frequency=%u\n", *frequency);
>>  	return 0;
>>  }
>>  
>> @@ -422,6 +658,9 @@ static const struct dvb_tuner_ops si2157_ops = {
>>  	.init = si2157_init,
>>  	.sleep = si2157_sleep,
>>  	.set_params = si2157_set_params,
>> +	.set_analog_params = si2157_set_analog_params,
>> +	.get_frequency     = si2157_get_frequency,
>> +	.get_bandwidth     = si2157_get_bandwidth,
>>  	.get_if_frequency = si2157_get_if_frequency,
>>  };
>>  
>> diff --git a/drivers/media/tuners/si2157_priv.h b/drivers/media/tuners/si2157_priv.h
>> index 50f8630..1e5ce5b 100644
>> --- a/drivers/media/tuners/si2157_priv.h
>> +++ b/drivers/media/tuners/si2157_priv.h
>> @@ -37,6 +37,8 @@ struct si2157_dev {
>>  	u8 chiptype;
>>  	u8 if_port;
>>  	u32 if_frequency;
>> +	u32 bandwidth;
>> +	u32 frequency;
>>  	struct delayed_work stat_work;
>>  
>>  #if defined(CONFIG_MEDIA_CONTROLLER)
>> -- 
>> 2.7.4

  reply	other threads:[~2019-04-08 18:18 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-29 17:51 [PATCH 00/13] si2157: Analog tuning and optimizations Brad Love
2018-12-29 17:51 ` [PATCH 01/13] si2157: Enable tuner status flags Brad Love
2018-12-29 17:51 ` [PATCH 02/13] si2157: Check error status bit on cmd execute Brad Love
2019-01-09 18:01   ` Antti Palosaari
2019-01-15 17:28     ` Brad Love
2018-12-29 17:51 ` [PATCH 03/13] si2157: Better check for running tuner in init Brad Love
2018-12-29 17:51 ` [PATCH 04/13] si2157: Add clock and pin setup for si2141 Brad Love
2019-01-20 17:17   ` Antti Palosaari
2019-01-22 17:10     ` Brad Love
2018-12-29 17:51 ` [PATCH 05/13] cx25840: Register labeling, chip specific correction Brad Love
2018-12-29 17:51 ` [PATCH 06/13] si2157: Add analog tuning related functions Brad Love
2018-12-29 17:51 ` [PATCH 07/13] si2157: Briefly wait for tuning operation to complete Brad Love
2019-04-05 10:29   ` Sean Young
2019-04-08 18:14     ` Brad Love
2019-04-08 20:55       ` Sean Young
2019-04-08 21:37         ` Brad Love
2019-04-10 14:48           ` Brad Love
2018-12-29 17:51 ` [PATCH 08/13] cx23885: Add analog tuner support to Hauppauge QuadHD Brad Love
2018-12-29 17:51 ` [PATCH 09/13] cx23885: Add analog tuner to 1265_K4 Brad Love
2018-12-29 17:51 ` [PATCH 11/13] cx23885: Add i2c device analog tuner support Brad Love
2018-12-29 17:51 ` [PATCH 10/13] cx231xx: " Brad Love
2018-12-29 17:51 ` [PATCH 12/13] si2157: add on-demand rf strength func Brad Love
2019-01-20 19:09   ` Antti Palosaari
2018-12-29 17:51 ` [PATCH 13/13] lgdt3306a: Add CNR v5 stat Brad Love
2019-02-27 18:27 ` [PATCH v2 00/13] si2157: Analog tuning and optimizations Brad Love
2019-02-27 18:27   ` [PATCH v2 01/12] si2157: Enable tuner status flags Brad Love
2019-02-27 18:27   ` [PATCH v2 02/12] si2157: Check error status bit on cmd execute Brad Love
2019-02-27 18:27   ` [PATCH v2 03/12] si2157: Better check for running tuner in init Brad Love
2019-02-27 18:27   ` [PATCH v2 04/12] cx25840: Register labeling, chip specific correction Brad Love
2019-02-27 18:27   ` [PATCH v2 05/12] si2157: Add analog tuning related functions Brad Love
2019-04-05 13:24     ` Sean Young
2019-04-08 18:18       ` Brad Love [this message]
2019-02-27 18:27   ` [PATCH v2 06/12] si2157: Briefly wait for tuning operation to complete Brad Love
2019-02-27 18:27   ` [PATCH v2 07/12] cx23885: Add analog tuner support to Hauppauge QuadHD Brad Love
2019-02-27 18:27   ` [PATCH v2 08/12] cx23885: Add analog frontend to 1265_K4 Brad Love
2019-02-27 18:27   ` [PATCH v2 09/12] cx23885: Add i2c device analog tuner support Brad Love
2019-02-27 18:27   ` [PATCH v2 10/12] cx231xx: " Brad Love
2019-02-27 18:27   ` [PATCH v2 11/12] si2157: add on-demand rf strength func Brad Love
2019-02-27 18:27   ` [PATCH v2 12/12] lgdt3306a: Add CNR v5 stat Brad Love

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e153da04-65c0-f582-70f1-243657401af2@nextdimension.cc \
    --to=brad@nextdimension.cc \
    --cc=linux-media@vger.kernel.org \
    --cc=sean@mess.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).