linux-media.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH 0/3] media: Add support for Cadence CSI2TX version 2.1
@ 2019-07-18 11:15 Jan Kotas
  2019-07-18 11:15 ` [PATCH 1/3] media: dt-bindings: Update bindings " Jan Kotas
                   ` (2 more replies)
  0 siblings, 3 replies; 10+ messages in thread
From: Jan Kotas @ 2019-07-18 11:15 UTC (permalink / raw)
  To: maxime.ripard, mchehab, robh+dt, mark.rutland
  Cc: linux-media, devicetree, linux-kernel, Jan Kotas

This patchset adds support for Cadence CSI2TX controller version 2.1.
Existing compatibility with v1.3 is maintained. 

Jan Kotas (3):
  media: dt-bindings: Update bindings for Cadence CSI2TX version 2.1
  media: Add lane checks for Cadence CSI2TX
  media: Add support for Cadence CSI2TX 2.1

 .../devicetree/bindings/media/cdns,csi2tx.txt      |   3 +-
 drivers/media/platform/cadence/cdns-csi2tx.c       | 155 ++++++++++++++++-----
 2 files changed, 125 insertions(+), 33 deletions(-)

-- 
2.15.0


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH 1/3] media: dt-bindings: Update bindings for Cadence CSI2TX version 2.1
  2019-07-18 11:15 [PATCH 0/3] media: Add support for Cadence CSI2TX version 2.1 Jan Kotas
@ 2019-07-18 11:15 ` Jan Kotas
  2019-07-20  8:26   ` Maxime Ripard
  2019-07-18 11:15 ` [PATCH 2/3] media: Add lane checks for Cadence CSI2TX Jan Kotas
  2019-07-18 11:15 ` [PATCH 3/3] media: Add support for Cadence CSI2TX 2.1 Jan Kotas
  2 siblings, 1 reply; 10+ messages in thread
From: Jan Kotas @ 2019-07-18 11:15 UTC (permalink / raw)
  To: maxime.ripard, mchehab, robh+dt, mark.rutland
  Cc: linux-media, devicetree, linux-kernel, Jan Kotas

This patch adds a DT bindings documentation for
Cadence CSI2TX v2.1 controller.

Signed-off-by: Jan Kotas <jank@cadence.com>
---
 Documentation/devicetree/bindings/media/cdns,csi2tx.txt | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/media/cdns,csi2tx.txt b/Documentation/devicetree/bindings/media/cdns,csi2tx.txt
index 459c6e332..751b9edf1 100644
--- a/Documentation/devicetree/bindings/media/cdns,csi2tx.txt
+++ b/Documentation/devicetree/bindings/media/cdns,csi2tx.txt
@@ -5,7 +5,8 @@ The Cadence MIPI-CSI2 TX controller is a CSI-2 bridge supporting up to
 4 CSI lanes in output, and up to 4 different pixel streams in input.
 
 Required properties:
-  - compatible: must be set to "cdns,csi2tx"
+  - compatible: must be set to "cdns,csi2tx" or "cdns,csi2tx-1.3"
+    for version 1.3 of the controller, "cdns,csi2tx-2.1" for v2.1
   - reg: base address and size of the memory mapped region
   - clocks: phandles to the clocks driving the controller
   - clock-names: must contain:
-- 
2.15.0


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH 2/3] media: Add lane checks for Cadence CSI2TX
  2019-07-18 11:15 [PATCH 0/3] media: Add support for Cadence CSI2TX version 2.1 Jan Kotas
  2019-07-18 11:15 ` [PATCH 1/3] media: dt-bindings: Update bindings " Jan Kotas
@ 2019-07-18 11:15 ` Jan Kotas
  2019-07-18 11:52   ` Marc Gonzalez
  2019-07-20  8:26   ` Maxime Ripard
  2019-07-18 11:15 ` [PATCH 3/3] media: Add support for Cadence CSI2TX 2.1 Jan Kotas
  2 siblings, 2 replies; 10+ messages in thread
From: Jan Kotas @ 2019-07-18 11:15 UTC (permalink / raw)
  To: maxime.ripard, mchehab, robh+dt, mark.rutland
  Cc: linux-media, devicetree, linux-kernel, Jan Kotas

This patch adds line checks for CSI2TX, to prevent
clock lane being used as a data lane.

Signed-off-by: Jan Kotas <jank@cadence.com>
---
 drivers/media/platform/cadence/cdns-csi2tx.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/cadence/cdns-csi2tx.c b/drivers/media/platform/cadence/cdns-csi2tx.c
index 5042d053b..232259c71 100644
--- a/drivers/media/platform/cadence/cdns-csi2tx.c
+++ b/drivers/media/platform/cadence/cdns-csi2tx.c
@@ -2,7 +2,7 @@
 /*
  * Driver for Cadence MIPI-CSI2 TX Controller
  *
- * Copyright (C) 2017-2018 Cadence Design Systems Inc.
+ * Copyright (C) 2017-2019 Cadence Design Systems Inc.
  */
 
 #include <linux/clk.h>
@@ -434,7 +434,7 @@ static int csi2tx_check_lanes(struct csi2tx_priv *csi2tx)
 {
 	struct v4l2_fwnode_endpoint v4l2_ep = { .bus_type = 0 };
 	struct device_node *ep;
-	int ret;
+	int ret, i;
 
 	ep = of_graph_get_endpoint_by_regs(csi2tx->dev->of_node, 0, 0);
 	if (!ep)
@@ -461,6 +461,15 @@ static int csi2tx_check_lanes(struct csi2tx_priv *csi2tx)
 		goto out;
 	}
 
+	for (i = 0; i < csi2tx->num_lanes; i++) {
+		if (v4l2_ep.bus.mipi_csi2.data_lanes[i] < 1) {
+			dev_err(csi2tx->dev, "Invalid lane[%d] number: %u\n",
+				i, v4l2_ep.bus.mipi_csi2.data_lanes[i]);
+			ret = -EINVAL;
+			goto out;
+		}
+	}
+
 	memcpy(csi2tx->lanes, v4l2_ep.bus.mipi_csi2.data_lanes,
 	       sizeof(csi2tx->lanes));
 
-- 
2.15.0


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH 3/3] media: Add support for Cadence CSI2TX 2.1
  2019-07-18 11:15 [PATCH 0/3] media: Add support for Cadence CSI2TX version 2.1 Jan Kotas
  2019-07-18 11:15 ` [PATCH 1/3] media: dt-bindings: Update bindings " Jan Kotas
  2019-07-18 11:15 ` [PATCH 2/3] media: Add lane checks for Cadence CSI2TX Jan Kotas
@ 2019-07-18 11:15 ` Jan Kotas
  2019-07-20  8:25   ` Maxime Ripard
  2 siblings, 1 reply; 10+ messages in thread
From: Jan Kotas @ 2019-07-18 11:15 UTC (permalink / raw)
  To: maxime.ripard, mchehab, robh+dt, mark.rutland
  Cc: linux-media, devicetree, linux-kernel, Jan Kotas

This patch adds support for CSI2TX v2.1 version of the controller.

Signed-off-by: Jan Kotas <jank@cadence.com>
---
 drivers/media/platform/cadence/cdns-csi2tx.c | 142 +++++++++++++++++++++------
 1 file changed, 112 insertions(+), 30 deletions(-)

diff --git a/drivers/media/platform/cadence/cdns-csi2tx.c b/drivers/media/platform/cadence/cdns-csi2tx.c
index 232259c71..e4d08acfb 100644
--- a/drivers/media/platform/cadence/cdns-csi2tx.c
+++ b/drivers/media/platform/cadence/cdns-csi2tx.c
@@ -52,6 +52,17 @@
 #define CSI2TX_STREAM_IF_CFG_REG(n)	(0x100 + (n) * 4)
 #define CSI2TX_STREAM_IF_CFG_FILL_LEVEL(n)	((n) & 0x1f)
 
+/* CSI2TX V2 Registers */
+#define CSI2TX_V2_DPHY_CFG_REG			0x28
+#define CSI2TX_V2_DPHY_CFG_RESET		BIT(16)
+#define CSI2TX_V2_DPHY_CFG_CLOCK_MODE		BIT(10)
+#define CSI2TX_V2_DPHY_CFG_MODE_MASK		GENMASK(9, 8)
+#define CSI2TX_V2_DPHY_CFG_MODE_LPDT		(2 << 8)
+#define CSI2TX_V2_DPHY_CFG_MODE_HS		(1 << 8)
+#define CSI2TX_V2_DPHY_CFG_MODE_ULPS		(0 << 8)
+#define CSI2TX_V2_DPHY_CFG_CLK_ENABLE		BIT(4)
+#define CSI2TX_V2_DPHY_CFG_LANE_ENABLE(n)	BIT(n)
+
 #define CSI2TX_LANES_MAX	4
 #define CSI2TX_STREAMS_MAX	4
 
@@ -70,6 +81,13 @@ struct csi2tx_fmt {
 	u32	bpp;
 };
 
+struct csi2tx_priv;
+
+/* CSI2TX Variant Operations */
+struct csi2tx_vops {
+	void (*dphy_setup)(struct csi2tx_priv *csi2tx);
+};
+
 struct csi2tx_priv {
 	struct device			*dev;
 	unsigned int			count;
@@ -82,6 +100,8 @@ struct csi2tx_priv {
 
 	void __iomem			*base;
 
+	struct csi2tx_vops		*vops;
+
 	struct clk			*esc_clk;
 	struct clk			*p_clk;
 	struct clk			*pixel_clk[CSI2TX_STREAMS_MAX];
@@ -209,53 +229,92 @@ static const struct v4l2_subdev_pad_ops csi2tx_pad_ops = {
 	.set_fmt	= csi2tx_set_pad_format,
 };
 
-static void csi2tx_reset(struct csi2tx_priv *csi2tx)
+/* Set Wake Up value in the D-PHY */
+static void csi2tx_dphy_set_wakeup(struct csi2tx_priv *csi2tx)
 {
-	writel(CSI2TX_CONFIG_SRST_REQ, csi2tx->base + CSI2TX_CONFIG_REG);
-
-	udelay(10);
+	writel(CSI2TX_DPHY_CLK_WAKEUP_ULPS_CYCLES(32),
+	       csi2tx->base + CSI2TX_DPHY_CLK_WAKEUP_REG);
 }
 
-static int csi2tx_start(struct csi2tx_priv *csi2tx)
+/*
+ * Finishes the D-PHY initialization
+ * reg dphy cfg value to be used
+ */
+static void csi2tx_dphy_init_finish(struct csi2tx_priv *csi2tx, u32 reg)
 {
-	struct media_entity *entity = &csi2tx->subdev.entity;
-	struct media_link *link;
 	unsigned int i;
-	u32 reg;
 
-	csi2tx_reset(csi2tx);
+	udelay(10);
 
-	writel(CSI2TX_CONFIG_CFG_REQ, csi2tx->base + CSI2TX_CONFIG_REG);
+	/* Enable our (clock and data) lanes */
+	reg |= CSI2TX_DPHY_CFG_CLK_ENABLE;
+	for (i = 0; i < csi2tx->num_lanes; i++)
+		reg |= CSI2TX_DPHY_CFG_LANE_ENABLE(csi2tx->lanes[i] - 1);
+	writel(reg, csi2tx->base + CSI2TX_DPHY_CFG_REG);
 
 	udelay(10);
 
-	/* Configure our PPI interface with the D-PHY */
-	writel(CSI2TX_DPHY_CLK_WAKEUP_ULPS_CYCLES(32),
-	       csi2tx->base + CSI2TX_DPHY_CLK_WAKEUP_REG);
+	/* Switch to HS mode */
+	reg &= ~CSI2TX_DPHY_CFG_MODE_MASK;
+	writel(reg | CSI2TX_DPHY_CFG_MODE_HS,
+	       csi2tx->base + CSI2TX_DPHY_CFG_REG);
+}
+
+/* Configures D-PHY in CSIv1.3 */
+static void csi2tx_dphy_setup(struct csi2tx_priv *csi2tx)
+{
+	u32 reg;
+	unsigned int i;
+
+	csi2tx_dphy_set_wakeup(csi2tx);
 
 	/* Put our lanes (clock and data) out of reset */
 	reg = CSI2TX_DPHY_CFG_CLK_RESET | CSI2TX_DPHY_CFG_MODE_LPDT;
 	for (i = 0; i < csi2tx->num_lanes; i++)
-		reg |= CSI2TX_DPHY_CFG_LANE_RESET(csi2tx->lanes[i]);
+		reg |= CSI2TX_DPHY_CFG_LANE_RESET(csi2tx->lanes[i] - 1);
 	writel(reg, csi2tx->base + CSI2TX_DPHY_CFG_REG);
 
-	udelay(10);
+	csi2tx_dphy_init_finish(csi2tx, reg);
+}
 
-	/* Enable our (clock and data) lanes */
-	reg |= CSI2TX_DPHY_CFG_CLK_ENABLE;
-	for (i = 0; i < csi2tx->num_lanes; i++)
-		reg |= CSI2TX_DPHY_CFG_LANE_ENABLE(csi2tx->lanes[i]);
-	writel(reg, csi2tx->base + CSI2TX_DPHY_CFG_REG);
+/* Configures D-PHY in CSIv2 */
+static void csi2tx_v2_dphy_setup(struct csi2tx_priv *csi2tx)
+{
+	u32 reg;
+
+	csi2tx_dphy_set_wakeup(csi2tx);
+
+	/* Put our lanes (clock and data) out of reset */
+	reg = CSI2TX_V2_DPHY_CFG_RESET | CSI2TX_V2_DPHY_CFG_MODE_LPDT;
+	writel(reg, csi2tx->base + CSI2TX_V2_DPHY_CFG_REG);
+
+	csi2tx_dphy_init_finish(csi2tx, reg);
+}
+
+static void csi2tx_reset(struct csi2tx_priv *csi2tx)
+{
+	writel(CSI2TX_CONFIG_SRST_REQ, csi2tx->base + CSI2TX_CONFIG_REG);
 
 	udelay(10);
+}
 
-	/* Switch to HS mode */
-	reg &= ~CSI2TX_DPHY_CFG_MODE_MASK;
-	writel(reg | CSI2TX_DPHY_CFG_MODE_HS,
-	       csi2tx->base + CSI2TX_DPHY_CFG_REG);
+static int csi2tx_start(struct csi2tx_priv *csi2tx)
+{
+	struct media_entity *entity = &csi2tx->subdev.entity;
+	struct media_link *link;
+	unsigned int i;
+
+	csi2tx_reset(csi2tx);
+
+	writel(CSI2TX_CONFIG_CFG_REQ, csi2tx->base + CSI2TX_CONFIG_REG);
 
 	udelay(10);
 
+	if (csi2tx->vops && csi2tx->vops->dphy_setup) {
+		csi2tx->vops->dphy_setup(csi2tx);
+		udelay(10);
+	}
+
 	/*
 	 * Create a static mapping between the CSI virtual channels
 	 * and the input streams.
@@ -478,9 +537,35 @@ static int csi2tx_check_lanes(struct csi2tx_priv *csi2tx)
 	return ret;
 }
 
+static const struct csi2tx_vops csi2tx_vops = {
+	.dphy_setup = csi2tx_dphy_setup,
+};
+
+static const struct csi2tx_vops csi2tx_v2_vops = {
+	.dphy_setup = csi2tx_v2_dphy_setup,
+};
+
+static const struct of_device_id csi2tx_of_table[] = {
+	{
+		.compatible = "cdns,csi2tx",
+		.data = &csi2tx_vops
+	},
+	{
+		.compatible = "cdns,csi2tx-1.3",
+		.data = &csi2tx_vops
+	},
+	{
+		.compatible = "cdns,csi2tx-2.1",
+		.data = &csi2tx_v2_vops
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, csi2tx_of_table);
+
 static int csi2tx_probe(struct platform_device *pdev)
 {
 	struct csi2tx_priv *csi2tx;
+	const struct of_device_id *of_id;
 	unsigned int i;
 	int ret;
 
@@ -495,6 +580,9 @@ static int csi2tx_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_free_priv;
 
+	of_id = of_match_node(csi2tx_of_table, pdev->dev.of_node);
+	csi2tx->vops = (struct csi2tx_vops *)of_id->data;
+
 	v4l2_subdev_init(&csi2tx->subdev, &csi2tx_subdev_ops);
 	csi2tx->subdev.owner = THIS_MODULE;
 	csi2tx->subdev.dev = &pdev->dev;
@@ -552,12 +640,6 @@ static int csi2tx_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct of_device_id csi2tx_of_table[] = {
-	{ .compatible = "cdns,csi2tx" },
-	{ },
-};
-MODULE_DEVICE_TABLE(of, csi2tx_of_table);
-
 static struct platform_driver csi2tx_driver = {
 	.probe	= csi2tx_probe,
 	.remove	= csi2tx_remove,
-- 
2.15.0


^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH 2/3] media: Add lane checks for Cadence CSI2TX
  2019-07-18 11:15 ` [PATCH 2/3] media: Add lane checks for Cadence CSI2TX Jan Kotas
@ 2019-07-18 11:52   ` Marc Gonzalez
  2019-07-18 12:07     ` Jan Kotas
  2019-07-20  8:26   ` Maxime Ripard
  1 sibling, 1 reply; 10+ messages in thread
From: Marc Gonzalez @ 2019-07-18 11:52 UTC (permalink / raw)
  To: Jan Kotas; +Cc: linux-media, LKML

On 18/07/2019 13:15, Jan Kotas wrote:

> This patch adds line checks for CSI2TX, to prevent
> clock lane being used as a data lane.

"line checks" or "lane checks? ^_^

NB: commit messages may be up to 72-character-wide ;-)
(No need to line-wrap at 50)

Regards.

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH 2/3] media: Add lane checks for Cadence CSI2TX
  2019-07-18 11:52   ` Marc Gonzalez
@ 2019-07-18 12:07     ` Jan Kotas
  0 siblings, 0 replies; 10+ messages in thread
From: Jan Kotas @ 2019-07-18 12:07 UTC (permalink / raw)
  To: Marc Gonzalez; +Cc: Jan Kotas, linux-media, LKML


> On 18 Jul 2019, at 13:52, Marc Gonzalez <marc.w.gonzalez@free.fr> wrote:
> 
> EXTERNAL MAIL
> 
> 
> On 18/07/2019 13:15, Jan Kotas wrote:
> 
>> This patch adds line checks for CSI2TX, to prevent
>> clock lane being used as a data lane.
> 
> "line checks" or "lane checks? ^_^

Yes, you’re right, should be lane checks :)

Regards,
Jan

> 
> NB: commit messages may be up to 72-character-wide ;-)
> (No need to line-wrap at 50)
> 
> Regards.


^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH 3/3] media: Add support for Cadence CSI2TX 2.1
  2019-07-18 11:15 ` [PATCH 3/3] media: Add support for Cadence CSI2TX 2.1 Jan Kotas
@ 2019-07-20  8:25   ` Maxime Ripard
  2019-07-22  7:07     ` Jan Kotas
  0 siblings, 1 reply; 10+ messages in thread
From: Maxime Ripard @ 2019-07-20  8:25 UTC (permalink / raw)
  To: Jan Kotas
  Cc: mchehab, robh+dt, mark.rutland, linux-media, devicetree, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 4320 bytes --]

Hi,

On Thu, Jul 18, 2019 at 12:15:09PM +0100, Jan Kotas wrote:
> This patch adds support for CSI2TX v2.1 version of the controller.
>
> Signed-off-by: Jan Kotas <jank@cadence.com>
> ---
>  drivers/media/platform/cadence/cdns-csi2tx.c | 142 +++++++++++++++++++++------
>  1 file changed, 112 insertions(+), 30 deletions(-)
>
> diff --git a/drivers/media/platform/cadence/cdns-csi2tx.c b/drivers/media/platform/cadence/cdns-csi2tx.c
> index 232259c71..e4d08acfb 100644
> --- a/drivers/media/platform/cadence/cdns-csi2tx.c
> +++ b/drivers/media/platform/cadence/cdns-csi2tx.c
> @@ -52,6 +52,17 @@
>  #define CSI2TX_STREAM_IF_CFG_REG(n)	(0x100 + (n) * 4)
>  #define CSI2TX_STREAM_IF_CFG_FILL_LEVEL(n)	((n) & 0x1f)
>
> +/* CSI2TX V2 Registers */
> +#define CSI2TX_V2_DPHY_CFG_REG			0x28
> +#define CSI2TX_V2_DPHY_CFG_RESET		BIT(16)
> +#define CSI2TX_V2_DPHY_CFG_CLOCK_MODE		BIT(10)
> +#define CSI2TX_V2_DPHY_CFG_MODE_MASK		GENMASK(9, 8)
> +#define CSI2TX_V2_DPHY_CFG_MODE_LPDT		(2 << 8)
> +#define CSI2TX_V2_DPHY_CFG_MODE_HS		(1 << 8)
> +#define CSI2TX_V2_DPHY_CFG_MODE_ULPS		(0 << 8)
> +#define CSI2TX_V2_DPHY_CFG_CLK_ENABLE		BIT(4)
> +#define CSI2TX_V2_DPHY_CFG_LANE_ENABLE(n)	BIT(n)
> +
>  #define CSI2TX_LANES_MAX	4
>  #define CSI2TX_STREAMS_MAX	4
>
> @@ -70,6 +81,13 @@ struct csi2tx_fmt {
>  	u32	bpp;
>  };
>
> +struct csi2tx_priv;
> +
> +/* CSI2TX Variant Operations */
> +struct csi2tx_vops {
> +	void (*dphy_setup)(struct csi2tx_priv *csi2tx);
> +};
> +
>  struct csi2tx_priv {
>  	struct device			*dev;
>  	unsigned int			count;
> @@ -82,6 +100,8 @@ struct csi2tx_priv {
>
>  	void __iomem			*base;
>
> +	struct csi2tx_vops		*vops;
> +
>  	struct clk			*esc_clk;
>  	struct clk			*p_clk;
>  	struct clk			*pixel_clk[CSI2TX_STREAMS_MAX];
> @@ -209,53 +229,92 @@ static const struct v4l2_subdev_pad_ops csi2tx_pad_ops = {
>  	.set_fmt	= csi2tx_set_pad_format,
>  };
>
> -static void csi2tx_reset(struct csi2tx_priv *csi2tx)
> +/* Set Wake Up value in the D-PHY */
> +static void csi2tx_dphy_set_wakeup(struct csi2tx_priv *csi2tx)
>  {
> -	writel(CSI2TX_CONFIG_SRST_REQ, csi2tx->base + CSI2TX_CONFIG_REG);
> -
> -	udelay(10);
> +	writel(CSI2TX_DPHY_CLK_WAKEUP_ULPS_CYCLES(32),
> +	       csi2tx->base + CSI2TX_DPHY_CLK_WAKEUP_REG);
>  }
>
> -static int csi2tx_start(struct csi2tx_priv *csi2tx)
> +/*
> + * Finishes the D-PHY initialization
> + * reg dphy cfg value to be used
> + */
> +static void csi2tx_dphy_init_finish(struct csi2tx_priv *csi2tx, u32 reg)
>  {
> -	struct media_entity *entity = &csi2tx->subdev.entity;
> -	struct media_link *link;
>  	unsigned int i;
> -	u32 reg;
>
> -	csi2tx_reset(csi2tx);
> +	udelay(10);
>
> -	writel(CSI2TX_CONFIG_CFG_REQ, csi2tx->base + CSI2TX_CONFIG_REG);
> +	/* Enable our (clock and data) lanes */
> +	reg |= CSI2TX_DPHY_CFG_CLK_ENABLE;
> +	for (i = 0; i < csi2tx->num_lanes; i++)
> +		reg |= CSI2TX_DPHY_CFG_LANE_ENABLE(csi2tx->lanes[i] - 1);
> +	writel(reg, csi2tx->base + CSI2TX_DPHY_CFG_REG);
>
>  	udelay(10);
>
> -	/* Configure our PPI interface with the D-PHY */
> -	writel(CSI2TX_DPHY_CLK_WAKEUP_ULPS_CYCLES(32),
> -	       csi2tx->base + CSI2TX_DPHY_CLK_WAKEUP_REG);
> +	/* Switch to HS mode */
> +	reg &= ~CSI2TX_DPHY_CFG_MODE_MASK;
> +	writel(reg | CSI2TX_DPHY_CFG_MODE_HS,
> +	       csi2tx->base + CSI2TX_DPHY_CFG_REG);
> +}
> +
> +/* Configures D-PHY in CSIv1.3 */
> +static void csi2tx_dphy_setup(struct csi2tx_priv *csi2tx)
> +{
> +	u32 reg;
> +	unsigned int i;
> +
> +	csi2tx_dphy_set_wakeup(csi2tx);
>
>  	/* Put our lanes (clock and data) out of reset */
>  	reg = CSI2TX_DPHY_CFG_CLK_RESET | CSI2TX_DPHY_CFG_MODE_LPDT;
>  	for (i = 0; i < csi2tx->num_lanes; i++)
> -		reg |= CSI2TX_DPHY_CFG_LANE_RESET(csi2tx->lanes[i]);
> +		reg |= CSI2TX_DPHY_CFG_LANE_RESET(csi2tx->lanes[i] - 1);

This looks like a separate change?

>  	writel(reg, csi2tx->base + CSI2TX_DPHY_CFG_REG);
>
> -	udelay(10);
> +	csi2tx_dphy_init_finish(csi2tx, reg);
> +}
>
> -	/* Enable our (clock and data) lanes */
> -	reg |= CSI2TX_DPHY_CFG_CLK_ENABLE;
> -	for (i = 0; i < csi2tx->num_lanes; i++)
> -		reg |= CSI2TX_DPHY_CFG_LANE_ENABLE(csi2tx->lanes[i]);

And you have a similar change here that should be in a separate patch,
with a proper explanation.

Otherwise, the rest looks good.

Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH 2/3] media: Add lane checks for Cadence CSI2TX
  2019-07-18 11:15 ` [PATCH 2/3] media: Add lane checks for Cadence CSI2TX Jan Kotas
  2019-07-18 11:52   ` Marc Gonzalez
@ 2019-07-20  8:26   ` Maxime Ripard
  1 sibling, 0 replies; 10+ messages in thread
From: Maxime Ripard @ 2019-07-20  8:26 UTC (permalink / raw)
  To: Jan Kotas
  Cc: mchehab, robh+dt, mark.rutland, linux-media, devicetree, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 357 bytes --]

65;5603;1c
On Thu, Jul 18, 2019 at 12:15:08PM +0100, Jan Kotas wrote:
> This patch adds line checks for CSI2TX, to prevent
> clock lane being used as a data lane.
>
> Signed-off-by: Jan Kotas <jank@cadence.com>

Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>

Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH 1/3] media: dt-bindings: Update bindings for Cadence CSI2TX version 2.1
  2019-07-18 11:15 ` [PATCH 1/3] media: dt-bindings: Update bindings " Jan Kotas
@ 2019-07-20  8:26   ` Maxime Ripard
  0 siblings, 0 replies; 10+ messages in thread
From: Maxime Ripard @ 2019-07-20  8:26 UTC (permalink / raw)
  To: Jan Kotas
  Cc: mchehab, robh+dt, mark.rutland, linux-media, devicetree, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 337 bytes --]

On Thu, Jul 18, 2019 at 12:15:07PM +0100, Jan Kotas wrote:
> This patch adds a DT bindings documentation for
> Cadence CSI2TX v2.1 controller.
>
> Signed-off-by: Jan Kotas <jank@cadence.com>

Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>

Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH 3/3] media: Add support for Cadence CSI2TX 2.1
  2019-07-20  8:25   ` Maxime Ripard
@ 2019-07-22  7:07     ` Jan Kotas
  0 siblings, 0 replies; 10+ messages in thread
From: Jan Kotas @ 2019-07-22  7:07 UTC (permalink / raw)
  To: Maxime Ripard
  Cc: Jan Kotas, mchehab, Rob Herring, Mark Rutland, linux-media,
	linux-devicetree, linux-kernel



> On 20 Jul 2019, at 10:25, Maxime Ripard <maxime.ripard@bootlin.com> wrote:
> 
> Hi,
> 
> On Thu, Jul 18, 2019 at 12:15:09PM +0100, Jan Kotas wrote:
>> 	/* Put our lanes (clock and data) out of reset */
>> 	reg = CSI2TX_DPHY_CFG_CLK_RESET | CSI2TX_DPHY_CFG_MODE_LPDT;
>> 	for (i = 0; i < csi2tx->num_lanes; i++)
>> -		reg |= CSI2TX_DPHY_CFG_LANE_RESET(csi2tx->lanes[i]);
>> +		reg |= CSI2TX_DPHY_CFG_LANE_RESET(csi2tx->lanes[i] - 1);
> 
> This looks like a separate change?
> 
>> 	writel(reg, csi2tx->base + CSI2TX_DPHY_CFG_REG);
>> 
>> -	udelay(10);
>> +	csi2tx_dphy_init_finish(csi2tx, reg);
>> +}
>> 
>> -	/* Enable our (clock and data) lanes */
>> -	reg |= CSI2TX_DPHY_CFG_CLK_ENABLE;
>> -	for (i = 0; i < csi2tx->num_lanes; i++)
>> -		reg |= CSI2TX_DPHY_CFG_LANE_ENABLE(csi2tx->lanes[i]);
> 
> And you have a similar change here that should be in a separate patch,
> with a proper explanation.
> 
> Otherwise, the rest looks good.

OK, I’ll create a separate patch with this modification.
Jan

> Maxime
> 
> --
> Maxime Ripard, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com


^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, other threads:[~2019-07-22  7:07 UTC | newest]

Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-18 11:15 [PATCH 0/3] media: Add support for Cadence CSI2TX version 2.1 Jan Kotas
2019-07-18 11:15 ` [PATCH 1/3] media: dt-bindings: Update bindings " Jan Kotas
2019-07-20  8:26   ` Maxime Ripard
2019-07-18 11:15 ` [PATCH 2/3] media: Add lane checks for Cadence CSI2TX Jan Kotas
2019-07-18 11:52   ` Marc Gonzalez
2019-07-18 12:07     ` Jan Kotas
2019-07-20  8:26   ` Maxime Ripard
2019-07-18 11:15 ` [PATCH 3/3] media: Add support for Cadence CSI2TX 2.1 Jan Kotas
2019-07-20  8:25   ` Maxime Ripard
2019-07-22  7:07     ` Jan Kotas

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).