RE: [PATCH v7 03/16] v4l: Add Intel IPU3 meta data uAPI

["Zhi, Yong" <yong.zhi@intel.com>]

Hi, Mauro,

Thanks for your review.

> -----Original Message-----
> From: Mauro Carvalho Chehab [mailto:mchehab+samsung@kernel.org]
> Sent: Friday, November 2, 2018 6:49 AM
> To: Zhi, Yong <yong.zhi@intel.com>
> Cc: linux-media@vger.kernel.org; sakari.ailus@linux.intel.com;
> tfiga@chromium.org; hans.verkuil@cisco.com;
> laurent.pinchart@ideasonboard.com; Mani, Rajmohan
> <rajmohan.mani@intel.com>; Zheng, Jian Xu <jian.xu.zheng@intel.com>; Hu,
> Jerry W <jerry.w.hu@intel.com>; Toivonen, Tuukka
> <tuukka.toivonen@intel.com>; Qiu, Tian Shu <tian.shu.qiu@intel.com>; Cao,
> Bingbu <bingbu.cao@intel.com>; Li, Chao C <chao.c.li@intel.com>
> Subject: Re: [PATCH v7 03/16] v4l: Add Intel IPU3 meta data uAPI
> 
> Em Mon, 29 Oct 2018 15:22:57 -0700
> Yong Zhi <yong.zhi@intel.com> escreveu:
> 
> > These meta formats are used on Intel IPU3 ImgU video queues
> > to carry 3A statistics and ISP pipeline parameters.
> 
> Just minor things. See below.
> 
> >
> > V4L2_META_FMT_IPU3_3A
> > V4L2_META_FMT_IPU3_PARAMS
> >
> > Signed-off-by: Yong Zhi <yong.zhi@intel.com>
> > Signed-off-by: Chao C Li <chao.c.li@intel.com>
> > Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com>
> > ---
> >  Documentation/media/uapi/v4l/meta-formats.rst      |    1 +
> >  .../media/uapi/v4l/pixfmt-meta-intel-ipu3.rst      |  181 ++
> 
> I would actually prefer to have those two changes merged together with
> patch 1, as it makes easier for review.
> 
> >  include/uapi/linux/intel-ipu3.h                    | 2819 ++++++++++++++++++++
> 
> This one makes sense to have a separate patch.
> 

Ack, will re-group the three files as suggested.

> >  3 files changed, 3001 insertions(+)
> >  create mode 100644 Documentation/media/uapi/v4l/pixfmt-meta-intel-
> ipu3.rst
> >  create mode 100644 include/uapi/linux/intel-ipu3.h
> >
> > diff --git a/Documentation/media/uapi/v4l/meta-formats.rst
> b/Documentation/media/uapi/v4l/meta-formats.rst
> > index cf971d5..eafc534 100644
> > --- a/Documentation/media/uapi/v4l/meta-formats.rst
> > +++ b/Documentation/media/uapi/v4l/meta-formats.rst
> > @@ -12,6 +12,7 @@ These formats are used for the :ref:`metadata`
> interface only.
> >  .. toctree::
> >      :maxdepth: 1
> >
> > +    pixfmt-meta-intel-ipu3
> >      pixfmt-meta-d4xx
> >      pixfmt-meta-uvc
> >      pixfmt-meta-vsp1-hgo
> > diff --git a/Documentation/media/uapi/v4l/pixfmt-meta-intel-ipu3.rst
> b/Documentation/media/uapi/v4l/pixfmt-meta-intel-ipu3.rst
> > new file mode 100644
> > index 0000000..23b945b
> > --- /dev/null
> > +++ b/Documentation/media/uapi/v4l/pixfmt-meta-intel-ipu3.rst
> > @@ -0,0 +1,181 @@
> > +.. -*- coding: utf-8; mode: rst -*-
> > +
> > +.. _intel-ipu3:
> > +
> >
> +***************************************************************
> ***
> > +V4L2_META_FMT_IPU3_PARAMS ('ip3p'), V4L2_META_FMT_IPU3_3A
> ('ip3s')
> >
> +***************************************************************
> ***
> > +
> > +.. c:type:: ipu3_uapi_stats_3a
> > +
> > +3A statistics
> > +=============
> > +
> > +For IPU3 ImgU, the 3A statistics accelerators collect different statistics over
> > +an input bayer frame. Those statistics, defined in data struct
> > +:c:type:`ipu3_uapi_stats_3a`, are meta output obtained from "ipu3-imgu
> 3a stat"
> > +video node, which are then passed to user space for statistics analysis
> > +using :c:type:`v4l2_meta_format` interface.
> > +
> > +The statistics collected are AWB (Auto-white balance) RGBS (Red, Green,
> Blue and
> > +Saturation measure) cells, AWB filter response, AF (Auto-focus) filter
> response,
> > +and AE (Auto-exposure) histogram.
> > +
> > +struct :c:type:`ipu3_uapi_4a_config` saves configurable parameters for all
> above.
> > +
> > +
> > +.. code-block:: c
> > +
> > +
> > +     struct ipu3_uapi_stats_3a {
> > +	struct ipu3_uapi_awb_raw_buffer awb_raw_buffer
> > +		 __attribute__((aligned(32)));
> > +	struct ipu3_uapi_ae_raw_buffer_aligned
> > +			ae_raw_buffer[IPU3_UAPI_MAX_STRIPES];
> > +	struct ipu3_uapi_af_raw_buffer af_raw_buffer;
> > +	struct ipu3_uapi_awb_fr_raw_buffer awb_fr_raw_buffer;
> > +	struct ipu3_uapi_4a_config stats_4a_config;
> > +	__u32 ae_join_buffers;
> > +	__u8 padding[28];
> > +	struct ipu3_uapi_stats_3a_bubble_info_per_stripe
> > +			stats_3a_bubble_per_stripe;
> > +	struct ipu3_uapi_ff_status stats_3a_status;
> > +     } __packed;
> > +
> > +
> > +.. c:type:: ipu3_uapi_params
> > +
> > +Pipeline parameters
> > +===================
> > +
> > +IPU3 pipeline has a number of image processing stages, each of which
> takes a
> > +set of parameters as input. The major stages of pipelines are shown here:
> > +
> > +Raw pixels -> Bayer Downscaling -> Optical Black Correction ->
> > +
> > +Linearization -> Lens Shading Correction -> White Balance / Exposure /
> > +
> > +Focus Apply -> Bayer Noise Reduction -> ANR -> Demosaicing -> Color
> > +
> > +Correction Matrix -> Gamma correction -> Color Space Conversion ->
> > +
> > +Chroma Down Scaling -> Chromatic Noise Reduction -> Total Color
> > +
> > +Correction -> XNR3 -> TNR -> DDR
> > +
> > +The table below presents a description of the above algorithms.
> > +
> > +========================
> =======================================================
> > +Name			 Description
> > +========================
> =======================================================
> > +Optical Black Correction Optical Black Correction block subtracts a pre-
> defined
> > +			 value from the respective pixel values to obtain
> better
> > +			 image quality.
> > +			 Defined in :c:type:`ipu3_uapi_obgrid_param`.
> > +Linearization		 This algo block uses linearization parameters
> to
> > +			 address non-linearity sensor effects. The Lookup
> table
> > +			 table is defined in
> > +			 :c:type:`ipu3_uapi_isp_lin_vmem_params`.
> > +SHD			 Lens shading correction is used to correct spatial
> > +			 non-uniformity of the pixel response due to optical
> > +			 lens shading. This is done by applying a different
> gain
> > +			 for each pixel. The gain, black level etc are
> > +			 configured in :c:type:`ipu3_uapi_shd_config_static`.
> > +BNR			 Bayer noise reduction block removes image noise by
> > +			 applying a bilateral filter.
> > +			 See :c:type:`ipu3_uapi_bnr_static_config` for details.
> > +ANR			 Advanced Noise Reduction is a block based algorithm
> > +			 that performs noise reduction in the Bayer domain.
> The
> > +			 convolution matrix etc can be found in
> > +			 :c:type:`ipu3_uapi_anr_config`.
> > +Demosaicing		 Demosaicing converts raw sensor data in
> Bayer format
> > +			 into RGB (Red, Green, Blue) presentation. Then add
> > +			 outputs of estimation of Y channel for following
> stream
> > +			 processing by Firmware. The struct is defined as
> > +			 :c:type:`ipu3_uapi_dm_config`.
> > +Color Correction	 Color Correction algo transforms sensor specific
> color
> > +			 space to the standard "sRGB" color space. This is
> done
> > +			 by applying 3x3 matrix defined in
> > +			 :c:type:`ipu3_uapi_ccm_mat_config`.
> > +Gamma correction	 Gamma
> correction :c:type:`ipu3_uapi_gamma_config` is a
> > +			 basic non-linear tone mapping correction that is
> > +			 applied per pixel for each pixel component.
> > +CSC			 Color space conversion transforms each pixel from
> the
> > +			 RGB primary presentation to YUV (Y - brightness,
> > +			 UV - Luminance) presentation. This is done by
> applying
> > +			 a 3x3 matrix defined in
> > +			 :c:type:`ipu3_uapi_csc_mat_config`
> > +CDS			 Chroma down sampling
> > +			 After the CSC is performed, the Chroma Down
> Sampling
> > +			 is applied for a UV plane down sampling by a factor
> > +			 of 2 in each direction for YUV 4:2:0 using a 4x2
> > +			 configurable filter :c:type:`ipu3_uapi_cds_params`.
> > +CHNR			 Chroma noise reduction
> > +			 This block processes only the chrominance pixels
> and
> > +			 performs noise reduction by cleaning the high
> > +			 frequency noise.
> > +			 See struct :c:type:`ipu3_uapi_yuvp1_chnr_config`.
> > +TCC			 Total color correction as defined in struct
> > +			 :c:type:`ipu3_uapi_yuvp2_tcc_static_config`.
> > +XNR3			 eXtreme Noise Reduction V3 is the third
> revision of
> > +			 noise reduction algorithm used to improve image
> > +			 quality. This removes the low frequency noise in the
> > +			 captured image. Two related structs are  being
> defined,
> > +			 :c:type:`ipu3_uapi_isp_xnr3_params` for ISP data
> memory
> > +			 and :c:type:`ipu3_uapi_isp_xnr3_vmem_params` for
> vector
> > +			 memory.
> > +TNR			 Temporal Noise Reduction block compares
> successive
> > +			 frames in time to remove anomalies / noise in pixel
> > +			 values. :c:type:`ipu3_uapi_isp_tnr3_vmem_params`
> and
> > +			 :c:type:`ipu3_uapi_isp_tnr3_params` are defined for
> ISP
> > +			 vector and data memory respectively.
> > +========================
> =======================================================
> > +
> > +A few stages of the pipeline will be executed by firmware running on the
> ISP
> > +processor, while many others will use a set of fixed hardware blocks also
> > +called accelerator cluster (ACC) to crunch pixel data and produce statistics.
> > +
> > +ACC parameters as defined by :c:type:`ipu3_uapi_acc_param`, can be
> selectively
> > +enabled / disabled by the user space through
> struct :c:type:`ipu3_uapi_flags`
> > +embedded in :c:type:`ipu3_uapi_params` structure. For parameters that
> are not
> > +enabled by the user space, corresponding structs are ignored by the ISP.
> > +
> > +Both 3A statistics and pipeline parameters described here are closely tied
> to
> > +the underlying camera sub-system (CSS) APIs. They are usually consumed
> and
> > +produced by dedicated user space libraries that comprise the important
> tuning
> > +tools, thus freeing the developers from being bothered with the low level
> > +hardware and algorithm details.
> > +
> > +It should be noted that IPU3 DMA operations require the addresses of all
> data
> > +structures (that includes both input and output) to be aligned on 32 byte
> > +boundaries.
> > +
> > +The meta data :c:type:`ipu3_uapi_params` will be sent to "ipu3-imgu
> parameters"
> > +video node in ``V4L2_BUF_TYPE_META_CAPTURE`` format.
> > +
> > +.. code-block:: c
> > +
> > +    struct ipu3_uapi_params {
> > +	/* Flags which of the settings below are to be applied */
> > +	struct ipu3_uapi_flags use __attribute__((aligned(32)));
> > +
> > +	/* Accelerator cluster parameters */
> > +	struct ipu3_uapi_acc_param acc_param;
> > +
> > +	/* ISP vector address space parameters */
> > +	struct ipu3_uapi_isp_lin_vmem_params lin_vmem_params;
> > +	struct ipu3_uapi_isp_tnr3_vmem_params tnr3_vmem_params;
> > +	struct ipu3_uapi_isp_xnr3_vmem_params xnr3_vmem_params;
> > +
> > +	/* ISP data memory (DMEM) parameters */
> > +	struct ipu3_uapi_isp_tnr3_params tnr3_dmem_params;
> > +	struct ipu3_uapi_isp_xnr3_params xnr3_dmem_params;
> > +
> > +	/* Optical black level compensation */
> > +	struct ipu3_uapi_obgrid_param obgrid_param;
> > +    } __packed;
> > +
> > +Intel IPU3 ImgU uAPI data types
> > +===============================
> > +
> > +.. kernel-doc:: include/uapi/linux/intel-ipu3.h
> > diff --git a/include/uapi/linux/intel-ipu3.h b/include/uapi/linux/intel-ipu3.h
> > new file mode 100644
> > index 0000000..c2608b6
> > --- /dev/null
> > +++ b/include/uapi/linux/intel-ipu3.h
> > @@ -0,0 +1,2819 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +/* Copyright (C) 2017 - 2018 Intel Corporation */
> > +
> > +#ifndef __IPU3_UAPI_H
> > +#define __IPU3_UAPI_H
> > +
> > +#include <linux/types.h>
> > +
> > +/********************* Key Acronyms *************************/
> > +/*
> > + * ACC - Accelerator cluster
> > + * ANR - Adaptive noise reduction
> > + * AWB_FR- Auto white balance filter response statistics
> > + * BNR - Bayer noise reduction parameters
> > + * BDS - Bayer downscaler parameters
> > + * CCM - Color correction matrix coefficients
> > + * CDS - Chroma down sample
> > + * CHNR - Chroma noise reduction
> > + * CSC - Color space conversion
> > + * DM - De-mosaic
> > + * IEFd - Image enhancement filter directed
> > + * Obgrid - Optical black level compensation
> > + * OSYS - Output system configuration
> > + * ROI - Region of interest
> > + * SHD - Lens shading correction table
> > + * TCC - Total color correction
> > + * YDS - Y down sampling
> > + * YTM - Y-tone mapping
> > + */
> 
> Hmm... It probably makes sense to convert this into a documentation
> block, e. g.:
> 
>   /**
>    * DOC: Key Acronyms used by IPU3 ImgU driver
>    *
> ...
>    */
> 
> And then include this header inside Documentation/media/v4l-
> drivers/ipu3.rst.
> 

Will discuss with Raj on how to include above acronyms into ipu3.rst.

> 
> > +
> > +/*
> > + * IPU3 DMA operations require buffers to be aligned at
> > + * 32 byte boundaries
> > + */
> > +
> > +/******************* ipu3_uapi_stats_3a *******************/
> > +
> > +#define IPU3_UAPI_MAX_STRIPES				2
> > +#define IPU3_UAPI_MAX_BUBBLE_SIZE			10
> > +
> > +#define IPU3_UAPI_GRID_START_MASK			((1 << 12) - 1)
> > +#define IPU3_UAPI_GRID_Y_START_EN			(1 << 15)
> > +
> > +/* controls generation of meta_data (like FF enable/disable) */
> > +#define IPU3_UAPI_AWB_RGBS_THR_B_EN			(1 << 14)
> > +#define IPU3_UAPI_AWB_RGBS_THR_B_INCL_SAT		(1 << 15)
> > +
> > +/**
> > + * struct ipu3_uapi_grid_config - Grid plane config
> > + *
> > + * @width:	Grid horizontal dimensions, in number of grid blocks(cells).
> > + * @height:	Grid vertical dimensions, in number of grid cells.
> > + * @block_width_log2:	Log2 of the width of each cell in pixels.
> > + *			for (2^3, 2^4, 2^5, 2^6, 2^7), values [3, 7].
> > + * @block_height_log2:	Log2 of the height of each cell in pixels.
> > + *			for (2^3, 2^4, 2^5, 2^6, 2^7), values [3, 7].
> > + * @height_per_slice:	The number of blocks in vertical axis per slice.
> > + *			Default 2.
> > + * @x_start: X value of top left corner of Region of Interest(ROI).
> > + * @y_start: Y value of top left corner of ROI
> > + * @x_end: X value of bottom right corner of ROI
> > + * @y_end: Y value of bottom right corner of ROI
> > + *
> > + * Due to the size of total amount of collected data, most statistics
> > + * create a grid-based output, and the data is then divided into "slices".
> > + */
> > +struct ipu3_uapi_grid_config {
> > +	__u8 width;
> > +	__u8 height;
> > +	__u16 block_width_log2:3;
> > +	__u16 block_height_log2:3;
> > +	__u16 height_per_slice:8;
> > +	__u16 x_start;
> > +	__u16 y_start;
> > +	__u16 x_end;
> > +	__u16 y_end;
> > +} __packed;
> > +
> > +/*
> > + * The grid based data is divided into "slices" called set, each slice of setX
> > + * refers to ipu3_uapi_grid_config width * height_per_slice.
> > + */
> > +#define IPU3_UAPI_AWB_MAX_SETS				60
> > +/* Based on grid size 80 * 60 and cell size 16 x 16 */
> > +#define IPU3_UAPI_AWB_SET_SIZE				1280
> > +#define IPU3_UAPI_AWB_MD_ITEM_SIZE			8
> > +#define IPU3_UAPI_AWB_SPARE_FOR_BUBBLES \
> > +	(IPU3_UAPI_MAX_BUBBLE_SIZE * IPU3_UAPI_MAX_STRIPES * \
> > +	 IPU3_UAPI_AWB_MD_ITEM_SIZE)
> > +#define IPU3_UAPI_AWB_MAX_BUFFER_SIZE \
> > +	(IPU3_UAPI_AWB_MAX_SETS * \
> > +	 (IPU3_UAPI_AWB_SET_SIZE +
> IPU3_UAPI_AWB_SPARE_FOR_BUBBLES))
> > +/**
> > + * struct ipu3_uapi_awb_meta_data - AWB meta data
> > + *
> > + * @meta_data_buffer:	Average values for each color channel
> > + */
> > +struct ipu3_uapi_awb_meta_data {
> > +	__u8 meta_data_buffer[IPU3_UAPI_AWB_MAX_BUFFER_SIZE];
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_awb_raw_buffer - AWB raw buffer
> > + *
> > + * @meta_data: buffer to hold auto white balance meta data.
> > + */
> > +struct ipu3_uapi_awb_raw_buffer {
> > +	struct ipu3_uapi_awb_meta_data meta_data;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_awb_config_s - AWB config
> > + *
> > + * @rgbs_thr_gr: gr threshold value.
> > + * @rgbs_thr_r: Red threshold value.
> > + * @rgbs_thr_gb: gb threshold value.
> > + * @rgbs_thr_b: Blue threshold value.
> > + * @grid: &ipu3_uapi_grid_config, the default grid resolution is 16x16 cells.
> > + *
> > + * The threshold is a saturation measure range [0, 8191], 8191 is default.
> > + * Values over threshold may be optionally rejected for averaging.
> > + */
> > +struct ipu3_uapi_awb_config_s {
> > +	__u16 rgbs_thr_gr;
> > +	__u16 rgbs_thr_r;
> > +	__u16 rgbs_thr_gb;
> > +	__u16 rgbs_thr_b;
> > +	struct ipu3_uapi_grid_config grid;
> > +} __attribute__((aligned(32))) __packed;
> 
> Hmm... Kernel defines a macro for aligned attribute:
> 
> 	include/linux/compiler_types.h:#define __aligned(x)
> __attribute__((aligned(x)))
> 
> I'm not a gcc expert, but it sounds weird to first ask it to align
> with 32 bits and then have __packed (with means that pads should be
> removed).
> 
> In other words, I *guess* is it should either be __packed
> or __aligned(32).
> 
> Not that it would do any difference, in practice, as this
> specific struct has a size with is multiple of 32 bits, but
> let's do the right annotation here, not mixing two incompatible
> alignment requirements.
> 

I saw Tomasz has replied to above. Will follow the reached consensus if update is needed, for this and other places in this file. 

Thanks!!

Yong
 
> > +
> > +/**
> > + * struct ipu3_uapi_awb_config - AWB config wrapper
> > + *
> > + * @config: config for auto white balance as defined by
> &ipu3_uapi_awb_config_s
> > + */
> > +struct ipu3_uapi_awb_config {
> > +	struct ipu3_uapi_awb_config_s config __attribute__((aligned(32)));
> > +} __packed;
> > +
> > +#define IPU3_UAPI_AE_COLORS				4	/* R,
> G, B, Y */
> > +#define IPU3_UAPI_AE_BINS				256
> > +#define IPU3_UAPI_AE_WEIGHTS				96
> > +
> > +/**
> > + * struct ipu3_uapi_ae_raw_buffer - AE global weighted histogram
> > + *
> > + * @vals: Sum of IPU3_UAPI_AE_COLORS in cell
> > + *
> > + * Each histogram contains IPU3_UAPI_AE_BINS bins. Each bin has 24 bit
> unsigned
> > + * for counting the number of the pixel.
> > + */
> > +struct ipu3_uapi_ae_raw_buffer {
> > +	__u32 vals[IPU3_UAPI_AE_BINS * IPU3_UAPI_AE_COLORS];
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_ae_raw_buffer_aligned - AE raw buffer
> > + *
> > + * @buff: &ipu3_uapi_ae_raw_buffer to hold full frame meta data.
> > + */
> > +struct ipu3_uapi_ae_raw_buffer_aligned {
> > +	struct ipu3_uapi_ae_raw_buffer buff __attribute__((aligned(32)));
> 
> Please use __aligned(32).
> 
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_ae_grid_config - AE weight grid
> > + *
> > + * @width: Grid horizontal dimensions. Value: [16, 32], default 16.
> > + * @height: Grid vertical dimensions. Value: [16, 24], default 16.
> > + * @block_width_log2: Log2 of the width of the grid cell, 2^3 = 16.
> > + * @block_height_log2: Log2 of the height of the grid cell, 2^3 = 16.
> > + * @__reserved0: reserved
> > + * @ae_en: 0: does not write to meta-data array, 1: write normally.
> > + * @rst_hist_array: write 1 to trigger histogram array reset.
> > + * @done_rst_hist_array: flag for histogram array reset done.
> > + * @x_start: X value of top left corner of ROI, default 0.
> > + * @y_start: Y value of top left corner of ROI, default 0.
> > + * @x_end: X value of bottom right corner of ROI
> > + * @y_end: Y value of bottom right corner of ROI
> > + *
> > + * The AE block accumulates 4 global weighted histograms(R, G, B, Y) over
> > + * a defined ROI within the frame. The contribution of each pixel into the
> > + * histogram, defined by &ipu3_uapi_ae_weight_elem LUT, is indexed by a
> grid.
> > + */
> > +struct ipu3_uapi_ae_grid_config {
> > +	__u8 width;
> > +	__u8 height;
> > +	__u8 block_width_log2:4;
> > +	__u8 block_height_log2:4;
> > +	__u8 __reserved0:5;
> > +	__u8 ae_en:1;
> > +	__u8 rst_hist_array:1;
> > +	__u8 done_rst_hist_array:1;
> > +	__u16 x_start;
> > +	__u16 y_start;
> > +	__u16 x_end;
> > +	__u16 y_end;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_ae_weight_elem - AE weights LUT
> > + *
> > + * @cell0: weighted histogram grid value.
> > + * @cell1: weighted histogram grid value.
> > + * @cell2: weighted histogram grid value.
> > + * @cell3: weighted histogram grid value.
> > + * @cell4: weighted histogram grid value.
> > + * @cell5: weighted histogram grid value.
> > + * @cell6: weighted histogram grid value.
> > + * @cell7: weighted histogram grid value.
> > + *
> > + * Use weighted grid value to give a different contribution factor to each
> cell.
> > + * Precision u4, range [0, 15].
> > + */
> > +struct ipu3_uapi_ae_weight_elem {
> > +	__u32 cell0:4;
> > +	__u32 cell1:4;
> > +	__u32 cell2:4;
> > +	__u32 cell3:4;
> > +	__u32 cell4:4;
> > +	__u32 cell5:4;
> > +	__u32 cell6:4;
> > +	__u32 cell7:4;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_ae_ccm - AE coefficients for WB and CCM
> > + *
> > + * @gain_gr: WB gain factor for the gr channels. Default 256.
> > + * @gain_r: WB gain factor for the r channel. Default 256.
> > + * @gain_b: WB gain factor for the b channel. Default 256.
> > + * @gain_gb: WB gain factor for the gb channels. Default 256.
> > + * @mat: 4x4 matrix that transforms Bayer quad output from WB to
> RGB+Y.
> > + *
> > + * Default:
> > + *	128, 0, 0, 0,
> > + *	0, 128, 0, 0,
> > + *	0, 0, 128, 0,
> > + *	0, 0, 0, 128,
> > + *
> > + * As part of the raw frame pre-process stage, the WB and color
> conversion need
> > + * to be applied to expose the impact of these gain operations.
> > + */
> > +struct ipu3_uapi_ae_ccm {
> > +	__u16 gain_gr;
> > +	__u16 gain_r;
> > +	__u16 gain_b;
> > +	__u16 gain_gb;
> > +	__s16 mat[16];
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_ae_config - AE config
> > + *
> > + * @grid_cfg:	config for auto exposure statistics grid. See struct
> > + *		&ipu3_uapi_ae_grid_config
> > + * @weights:	&IPU3_UAPI_AE_WEIGHTS is based on 32x24 blocks
> in the grid.
> > + *		Each grid cell has a corresponding value in weights LUT called
> > + *		grid value, global histogram is updated based on grid value
> and
> > + *		pixel value.
> > + * @ae_ccm:	Color convert matrix pre-processing block.
> > + *
> > + * Calculate AE grid from image resolution, resample ae weights.
> > + */
> > +struct ipu3_uapi_ae_config {
> > +	struct ipu3_uapi_ae_grid_config grid_cfg __attribute__((aligned(32)));
> > +	struct ipu3_uapi_ae_weight_elem weights[
> > +						IPU3_UAPI_AE_WEIGHTS]
> __attribute__((aligned(32)));
> > +	struct ipu3_uapi_ae_ccm ae_ccm __attribute__((aligned(32)));
> 
> Same above: __aligned(32). Please review the remaining of this header,
> as there are other occurrences of this pattern.
> 
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_af_filter_config - AF 2D filter for contrast
> measurements
> > + *
> > + * @y1_coeff_0:	filter Y1, structure: 3x11, support both symmetry and
> > + *		anti-symmetry type. A12 is center, A1-A11 are neighbours.
> > + *		for analyzing low frequency content, used to calculate sum
> > + *		of gradients in x direction.
> > + * @y1_coeff_0.a1:	filter1 coefficients A1, u8, default 0.
> > + * @y1_coeff_0.a2:	filter1 coefficients A2, u8, default 0.
> > + * @y1_coeff_0.a3:	filter1 coefficients A3, u8, default 0.
> > + * @y1_coeff_0.a4:	filter1 coefficients A4, u8, default 0.
> > + * @y1_coeff_1:		Struct
> > + * @y1_coeff_1.a5:	filter1 coefficients A5, u8, default 0.
> > + * @y1_coeff_1.a6:	filter1 coefficients A6, u8, default 0.
> > + * @y1_coeff_1.a7:	filter1 coefficients A7, u8, default 0.
> > + * @y1_coeff_1.a8:	filter1 coefficients A8, u8, default 0.
> > + * @y1_coeff_2:		Struct
> > + * @y1_coeff_2.a9:	filter1 coefficients A9, u8, default 0.
> > + * @y1_coeff_2.a10:	filter1 coefficients A10, u8, default 0.
> > + * @y1_coeff_2.a11:	filter1 coefficients A11, u8, default 0.
> > + * @y1_coeff_2.a12:	filter1 coefficients A12, u8, default 128.
> > + * @y1_sign_vec:	Each bit corresponds to one coefficient sign bit,
> > + *			0: positive, 1: negative, default 0.
> > + * @y2_coeff_0:	Y2, same structure as Y1. For analyzing high
> frequency content.
> > + * @y2_coeff_0.a1:	filter2 coefficients A1, u8, default 0.
> > + * @y2_coeff_0.a2:	filter2 coefficients A2, u8, default 0.
> > + * @y2_coeff_0.a3:	filter2 coefficients A3, u8, default 0.
> > + * @y2_coeff_0.a4:	filter2 coefficients A4, u8, default 0.
> > + * @y2_coeff_1:	Struct
> > + * @y2_coeff_1.a5:	filter2 coefficients A5, u8, default 0.
> > + * @y2_coeff_1.a6:	filter2 coefficients A6, u8, default 0.
> > + * @y2_coeff_1.a7:	filter2 coefficients A7, u8, default 0.
> > + * @y2_coeff_1.a8:	filter2 coefficients A8, u8, default 0.
> > + * @y2_coeff_2:	Struct
> > + * @y2_coeff_2.a9:	filter1 coefficients A9, u8, default 0.
> > + * @y2_coeff_2.a10:	filter1 coefficients A10, u8, default 0.
> > + * @y2_coeff_2.a11:	filter1 coefficients A11, u8, default 0.
> > + * @y2_coeff_2.a12:	filter1 coefficients A12, u8, default 128.
> > + * @y2_sign_vec:	Each bit corresponds to one coefficient sign bit,
> > + *			0: positive, 1: negative, default 0.
> > + * @y_calc:	Pre-processing that converts Bayer quad to RGB+Y values to
> be
> > + *		used for building histogram. Range [0, 32], default 8.
> > + * Rule:
> > + *		y_gen_rate_gr + y_gen_rate_r + y_gen_rate_b +
> y_gen_rate_gb = 32
> > + *		A single Y is calculated based on sum of Gr/R/B/Gb based on
> > + *		their contribution ratio.
> > + * @y_calc.y_gen_rate_gr:	Contribution ratio Gr for Y
> > + * @y_calc.y_gen_rate_r:	Contribution ratio R for Y
> > + * @y_calc.y_gen_rate_b:	Contribution ratio B for Y
> > + * @y_calc.y_gen_rate_gb:	Contribution ratio Gb for Y
> > + * @nf:	The shift right value that should be applied during the Y1/Y2
> filter to
> > + *	make sure the total memory needed is 2 bytes per grid cell.
> > + * @nf.__reserved0:	reserved
> > + * @nf.y1_nf:	Normalization factor for the convolution coeffs of y1,
> > + *		should be log2 of the sum of the abs values of the filter
> > + *		coeffs, default 7 (2^7 = 128).
> > + * @nf.__reserved1:	reserved
> > + * @nf.y2_nf:	Normalization factor for y2, should be log2 of the
> sum of the
> > + *		abs values of the filter coeffs.
> > + * @nf.__reserved2:	reserved
> > + */
> > +struct ipu3_uapi_af_filter_config {
> > +	struct {
> > +		__u8 a1;
> > +		__u8 a2;
> > +		__u8 a3;
> > +		__u8 a4;
> > +	} y1_coeff_0;
> > +	struct {
> > +		__u8 a5;
> > +		__u8 a6;
> > +		__u8 a7;
> > +		__u8 a8;
> > +	} y1_coeff_1;
> > +	struct {
> > +		__u8 a9;
> > +		__u8 a10;
> > +		__u8 a11;
> > +		__u8 a12;
> > +	} y1_coeff_2;
> > +
> > +	__u32 y1_sign_vec;
> > +
> > +	struct {
> > +		__u8 a1;
> > +		__u8 a2;
> > +		__u8 a3;
> > +		__u8 a4;
> > +	} y2_coeff_0;
> > +	struct {
> > +		__u8 a5;
> > +		__u8 a6;
> > +		__u8 a7;
> > +		__u8 a8;
> > +	} y2_coeff_1;
> > +	struct {
> > +		__u8 a9;
> > +		__u8 a10;
> > +		__u8 a11;
> > +		__u8 a12;
> > +	} y2_coeff_2;
> > +
> > +	__u32 y2_sign_vec;
> > +
> > +	struct {
> > +		__u8 y_gen_rate_gr;
> > +		__u8 y_gen_rate_r;
> > +		__u8 y_gen_rate_b;
> > +		__u8 y_gen_rate_gb;
> > +	} y_calc;
> > +
> > +	struct {
> > +		__u32 __reserved0:8;
> > +		__u32 y1_nf:4;
> > +		__u32 __reserved1:4;
> > +		__u32 y2_nf:4;
> > +		__u32 __reserved2:12;
> > +	} nf;
> > +} __packed;
> > +
> > +#define IPU3_UAPI_AF_MAX_SETS				24
> > +#define IPU3_UAPI_AF_MD_ITEM_SIZE			4
> > +#define IPU3_UAPI_AF_SPARE_FOR_BUBBLES \
> > +	(IPU3_UAPI_MAX_BUBBLE_SIZE * IPU3_UAPI_MAX_STRIPES * \
> > +	 IPU3_UAPI_AF_MD_ITEM_SIZE)
> > +#define IPU3_UAPI_AF_Y_TABLE_SET_SIZE			128
> > +#define IPU3_UAPI_AF_Y_TABLE_MAX_SIZE \
> > +	(IPU3_UAPI_AF_MAX_SETS * \
> > +	 (IPU3_UAPI_AF_Y_TABLE_SET_SIZE +
> IPU3_UAPI_AF_SPARE_FOR_BUBBLES) * \
> > +	 IPU3_UAPI_MAX_STRIPES)
> > +
> > +/**
> > + * struct ipu3_uapi_af_meta_data - AF meta data
> > + *
> > + * @y_table:	Each color component will be convolved separately with
> filter1
> > + *		and filter2 and the result will be summed out and averaged
> for
> > + *		each cell.
> > + */
> > +struct ipu3_uapi_af_meta_data {
> > +	__u8 y_table[IPU3_UAPI_AF_Y_TABLE_MAX_SIZE]
> __attribute__((aligned(32)));
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_af_raw_buffer - AF raw buffer
> > + *
> > + * @meta_data: raw buffer &ipu3_uapi_af_meta_data for auto focus
> meta data.
> > + */
> > +struct ipu3_uapi_af_raw_buffer {
> > +	struct ipu3_uapi_af_meta_data meta_data
> __attribute__((aligned(32)));
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_af_config_s - AF config
> > + *
> > + * @filter_config: AF uses Y1 and Y2 filters as configured in
> > + *		   &ipu3_uapi_af_filter_config
> > + * @padding: paddings
> > + * @grid_cfg: See &ipu3_uapi_grid_config, default resolution 16x16. Use
> large
> > + *	      grid size for large image and vice versa.
> > + */
> > +struct ipu3_uapi_af_config_s {
> > +	struct ipu3_uapi_af_filter_config filter_config
> __attribute__((aligned(32)));
> > +	__u8 padding[4];
> > +	struct ipu3_uapi_grid_config grid_cfg __attribute__((aligned(32)));
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_af_config - AF config wrapper
> > + *
> > + * @config: config for auto focus as defined by &ipu3_uapi_af_config_s
> > + */
> > +struct ipu3_uapi_af_config {
> > +	struct ipu3_uapi_af_config_s config;
> > +} __packed;
> > +
> > +#define IPU3_UAPI_AWB_FR_MAX_SETS			24
> > +#define IPU3_UAPI_AWB_FR_MD_ITEM_SIZE			8
> > +#define IPU3_UAPI_AWB_FR_BAYER_TBL_SIZE			256
> > +#define IPU3_UAPI_AWB_FR_SPARE_FOR_BUBBLES \
> > +	(IPU3_UAPI_MAX_BUBBLE_SIZE * IPU3_UAPI_MAX_STRIPES * \
> > +	 IPU3_UAPI_AWB_FR_MD_ITEM_SIZE)
> > +#define IPU3_UAPI_AWB_FR_BAYER_TABLE_MAX_SIZE \
> > +	(IPU3_UAPI_AWB_FR_MAX_SETS * \
> > +	(IPU3_UAPI_AWB_FR_BAYER_TBL_SIZE + \
> > +	 IPU3_UAPI_AWB_FR_SPARE_FOR_BUBBLES) *
> IPU3_UAPI_MAX_STRIPES)
> > +
> > +/**
> > + * struct ipu3_uapi_awb_fr_meta_data - AWB filter response meta data
> > + *
> > + * @bayer_table: Statistics output on the grid after convolving with 1D
> filter.
> > + */
> > +struct ipu3_uapi_awb_fr_meta_data {
> > +	__u8 bayer_table[IPU3_UAPI_AWB_FR_BAYER_TABLE_MAX_SIZE]
> __attribute__((aligned(32)));
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_awb_fr_raw_buffer - AWB filter response raw buffer
> > + *
> > + * @meta_data: See &ipu3_uapi_awb_fr_meta_data.
> > + */
> > +struct ipu3_uapi_awb_fr_raw_buffer {
> > +	struct ipu3_uapi_awb_fr_meta_data meta_data;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_awb_fr_config_s - AWB filter response config
> > + *
> > + * @grid_cfg:	grid config, default 16x16.
> > + * @bayer_coeff:	1D Filter 1x11 center symmetry/anti-symmetry.
> > + *			coeffcients defaults { 0, 0, 0, 0, 0, 128 }.
> > + *			Applied on whole image for each Bayer channel
> separately
> > + *			by a weighted sum of its 11x1 neighbors.
> > + * @__reserved1:	reserved
> > + * @bayer_sign:	sign of filter coeffcients, default 0.
> > + * @bayer_nf:	normalization factor for the convolution coeffs, to
> make sure
> > + *		total memory needed is within pre-determined range.
> > + *		NF should be the log2 of the sum of the abs values of the
> > + *		filter coeffs, range [7, 14], default 7.
> > + * @__reserved2:	reserved
> > + */
> > +struct ipu3_uapi_awb_fr_config_s {
> > +	struct ipu3_uapi_grid_config grid_cfg;
> > +	__u8 bayer_coeff[6];
> > +	__u16 __reserved1;
> > +	__u32 bayer_sign;
> > +	__u8 bayer_nf;
> > +	__u8 __reserved2[3];
> > +} __attribute__((aligned(32))) __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_awb_fr_config - AWB filter response config wrapper
> > + *
> > + * @config:	See &ipu3_uapi_awb_fr_config_s.
> > + */
> > +struct ipu3_uapi_awb_fr_config {
> > +	struct ipu3_uapi_awb_fr_config_s config;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_4a_config - 4A config
> > + *
> > + * @awb_config: &ipu3_uapi_awb_config_s, default resolution 16x16
> > + * @ae_grd_config: auto exposure statistics &ipu3_uapi_ae_grid_config
> > + * @padding: paddings
> > + * @af_config: auto focus config &ipu3_uapi_af_config_s
> > + * @awb_fr_config: &ipu3_uapi_awb_fr_config_s, default resolution
> 16x16
> > + */
> > +struct ipu3_uapi_4a_config {
> > +	struct ipu3_uapi_awb_config_s awb_config
> __attribute__((aligned(32)));
> > +	struct ipu3_uapi_ae_grid_config ae_grd_config;
> > +	__u8 padding[20];
> > +	struct ipu3_uapi_af_config_s af_config;
> > +	struct ipu3_uapi_awb_fr_config_s awb_fr_config;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_bubble_info - Bubble info for host side debugging
> > + *
> > + * @num_of_stripes: A single frame is divided into several parts called
> stripes
> > + *		    due to limitation on line buffer memory.
> > + *		    The separation between the stripes is vertical. Each such
> > + *		    stripe is processed as a single frame by the ISP pipe.
> > + * @padding: padding bytes.
> > + * @num_sets: number of sets.
> > + * @padding1: padding bytes.
> > + * @size_of_set: set size.
> > + * @padding2: padding bytes.
> > + * @bubble_size: is the amount of padding in the bubble expressed in
> "sets".
> > + * @padding3: padding bytes.
> > + */
> > +struct ipu3_uapi_bubble_info {
> > +	__u32 num_of_stripes __attribute__((aligned(32)));
> > +	__u8 padding[28];
> > +	__u32 num_sets;
> > +	__u8 padding1[28];
> > +	__u32 size_of_set;
> > +	__u8 padding2[28];
> > +	__u32 bubble_size;
> > +	__u8 padding3[28];
> > +} __packed;
> > +
> > +/*
> > + * struct ipu3_uapi_stats_3a_bubble_info_per_stripe
> > + */
> > +struct ipu3_uapi_stats_3a_bubble_info_per_stripe {
> > +	struct ipu3_uapi_bubble_info awb[IPU3_UAPI_MAX_STRIPES];
> > +	struct ipu3_uapi_bubble_info af[IPU3_UAPI_MAX_STRIPES];
> > +	struct ipu3_uapi_bubble_info awb_fr[IPU3_UAPI_MAX_STRIPES];
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_ff_status - Enable bits for each 3A fixed function
> > + *
> > + * @awb_en: auto white balance enable
> > + * @padding: padding config
> > + * @ae_en: auto exposure enable
> > + * @padding1: padding config
> > + * @af_en: auto focus enable
> > + * @padding2: padding config
> > + * @awb_fr_en: awb filter response enable bit
> > + * @padding3: padding config
> > + */
> > +struct ipu3_uapi_ff_status {
> > +	__u32 awb_en __attribute__((aligned(32)));
> > +	__u8 padding[28];
> > +	__u32 ae_en;
> > +	__u8 padding1[28];
> > +	__u32 af_en;
> > +	__u8 padding2[28];
> > +	__u32 awb_fr_en;
> > +	__u8 padding3[28];
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_stats_3a - 3A statistics
> > + *
> > + * @awb_raw_buffer: auto white balance meta data
> &ipu3_uapi_awb_raw_buffer
> > + * @ae_raw_buffer: auto exposure raw data
> &ipu3_uapi_ae_raw_buffer_aligned
> > + * @af_raw_buffer: &ipu3_uapi_af_raw_buffer for auto focus meta data
> > + * @awb_fr_raw_buffer: value as specified by
> &ipu3_uapi_awb_fr_raw_buffer
> > + * @stats_4a_config: 4a statistics config as defined by
> &ipu3_uapi_4a_config.
> > + * @ae_join_buffers: 1 to use ae_raw_buffer.
> > + * @padding: padding config
> > + * @stats_3a_bubble_per_stripe: a
> &ipu3_uapi_stats_3a_bubble_info_per_stripe
> > + * @stats_3a_status: 3a statistics status set in &ipu3_uapi_ff_status
> > + */
> > +struct ipu3_uapi_stats_3a {
> > +	struct ipu3_uapi_awb_raw_buffer awb_raw_buffer
> __attribute__((aligned(32)));
> > +	struct ipu3_uapi_ae_raw_buffer_aligned
> > +			ae_raw_buffer[IPU3_UAPI_MAX_STRIPES];
> > +	struct ipu3_uapi_af_raw_buffer af_raw_buffer;
> > +	struct ipu3_uapi_awb_fr_raw_buffer awb_fr_raw_buffer;
> > +	struct ipu3_uapi_4a_config stats_4a_config;
> > +	__u32 ae_join_buffers;
> > +	__u8 padding[28];
> > +	struct ipu3_uapi_stats_3a_bubble_info_per_stripe
> > +			stats_3a_bubble_per_stripe;
> > +	struct ipu3_uapi_ff_status stats_3a_status;
> > +} __packed;
> > +
> > +/******************* ipu3_uapi_acc_param *******************/
> > +
> > +#define IPU3_UAPI_ISP_VEC_ELEMS				64
> > +#define IPU3_UAPI_ISP_TNR3_VMEM_LEN			9
> > +
> > +#define IPU3_UAPI_BNR_LUT_SIZE				32
> > +
> > +/* number of elements in gamma correction LUT */
> > +#define IPU3_UAPI_GAMMA_CORR_LUT_ENTRIES		256
> > +
> > +/* largest grid is 73x56, for grid_height_per_slice of 2, 73x2 = 146 */
> > +#define IPU3_UAPI_SHD_MAX_CELLS_PER_SET			146
> > +#define IPU3_UAPI_SHD_MAX_CFG_SETS			28
> > +/* Normalization shift aka nf */
> > +#define IPU3_UAPI_SHD_BLGR_NF_SHIFT			13
> > +#define IPU3_UAPI_SHD_BLGR_NF_MASK			7
> > +
> > +#define IPU3_UAPI_YUVP2_TCC_MACC_TABLE_ELEMENTS		16
> > +#define IPU3_UAPI_YUVP2_TCC_INV_Y_LUT_ELEMENTS		14
> > +#define IPU3_UAPI_YUVP2_TCC_GAIN_PCWL_LUT_ELEMENTS	258
> > +#define IPU3_UAPI_YUVP2_TCC_R_SQR_LUT_ELEMENTS		24
> > +
> > +#define IPU3_UAPI_ANR_LUT_SIZE				26
> > +#define IPU3_UAPI_ANR_PYRAMID_SIZE			22
> > +
> > +#define IPU3_UAPI_LIN_LUT_SIZE				64
> > +
> > +/* Bayer Noise Reduction related structs */
> > +
> > +/**
> > + * struct ipu3_uapi_bnr_static_config_wb_gains_config - White balance
> gains
> > + *
> > + * @gr:	white balance gain for Gr channel.
> > + * @r:	white balance gain for R channel.
> > + * @b:	white balance gain for B channel.
> > + * @gb:	white balance gain for Gb channel.
> > + *
> > + * Precision u3.13, range [0, 8]. White balance correction is done by
> applying
> > + * a multiplicative gain to each color channels prior to BNR.
> > + */
> > +struct ipu3_uapi_bnr_static_config_wb_gains_config {
> > +	__u16 gr;
> > +	__u16 r;
> > +	__u16 b;
> > +	__u16 gb;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_bnr_static_config_wb_gains_thr_config - Threshold
> config
> > + *
> > + * @gr:	white balance threshold gain for Gr channel.
> > + * @r:	white balance threshold gain for R channel.
> > + * @b:	white balance threshold gain for B channel.
> > + * @gb:	white balance threshold gain for Gb channel.
> > + *
> > + * Defines the threshold that specifies how different a defect pixel can be
> from
> > + * its neighbors.(used by dynamic defect pixel correction sub block)
> > + * Precision u4.4 range [0, 8].
> > + */
> > +struct ipu3_uapi_bnr_static_config_wb_gains_thr_config {
> > +	__u8 gr;
> > +	__u8 r;
> > +	__u8 b;
> > +	__u8 gb;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_bnr_static_config_thr_coeffs_config - Noise model
> > + *				coefficients that controls noise threshold
> > + *
> > + * @cf:	Free coefficient for threshold calculation, range [0, 8191],
> default 0.
> > + * @__reserved0:	reserved
> > + * @cg:	Gain coefficient for threshold calculation, [0, 31], default 8.
> > + * @ci:	Intensity coefficient for threshold calculation. range [0, 0x1f]
> > + *	default 6.
> > + * 	format: u3.2 (3 most significant bits represent whole number,
> > + *	2 least significant bits represent the fractional part
> > + *	with each count representing 0.25)
> > + *	e.g 6 in binary format is 00110, that translates to 1.5
> > + * @__reserved1:	reserved
> > + * @r_nf:	Normalization shift value for r^2 calculation, range [12, 20]
> > + *		where r is a radius of pixel [row, col] from centor of sensor.
> > + *		default 14.
> > + *
> > + * Threshold used to distinguish between noise and details.
> > + */
> > +struct ipu3_uapi_bnr_static_config_thr_coeffs_config {
> > +	__u32 cf:13;
> > +	__u32 __reserved0:3;
> > +	__u32 cg:5;
> > +	__u32 ci:5;
> > +	__u32 __reserved1:1;
> > +	__u32 r_nf:5;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_bnr_static_config_thr_ctrl_shd_config - Shading config
> > + *
> > + * @gr:	Coefficient defines lens shading gain approximation for gr
> channel
> > + * @r:	Coefficient defines lens shading gain approximation for r
> channel
> > + * @b:	Coefficient defines lens shading gain approximation for b
> channel
> > + * @gb:	Coefficient defines lens shading gain approximation for gb
> channel
> > + *
> > + * Parameters for noise model (NM) adaptation of BNR due to shading
> correction.
> > + * All above have precision of u3.3, default to 0.
> > + */
> > +struct ipu3_uapi_bnr_static_config_thr_ctrl_shd_config {
> > +	__u8 gr;
> > +	__u8 r;
> > +	__u8 b;
> > +	__u8 gb;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_bnr_static_config_opt_center_config - Optical center
> config
> > + *
> > + * @x_reset:	Reset value of X (col start - X center). Precision s12.0.
> > + * @__reserved0:	reserved
> > + * @y_reset:	Reset value of Y (row start - Y center). Precision s12.0.
> > + * @__reserved2:	reserved
> > + *
> > + * Distance from corner to optical center for NM adaptation due to
> shading
> > + * correction (should be calculated based on shading tables)
> > + */
> > +struct ipu3_uapi_bnr_static_config_opt_center_config {
> > +	__s32 x_reset:13;
> > +	__u32 __reserved0:3;
> > +	__s32 y_reset:13;
> > +	__u32 __reserved2:3;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_bnr_static_config_lut_config - BNR square root lookup
> table
> > + *
> > + * @values: pre-calculated values of square root function.
> > + *
> > + * LUT implementation of square root operation.
> > + */
> > +struct ipu3_uapi_bnr_static_config_lut_config {
> > +	__u8 values[IPU3_UAPI_BNR_LUT_SIZE];
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_bnr_static_config_bp_ctrl_config - Detect bad pixels
> (bp)
> > + *
> > + * @bp_thr_gain:	Defines the threshold that specifies how different a
> > + *			defect pixel can be from its neighbors. Threshold is
> > + *			dependent on de-noise threshold calculated by
> algorithm.
> > + *			Range [4, 31], default 4.
> > + * @__reserved0:	reserved
> > + * @defect_mode:	Mode of addressed defect pixels,
> > + *			0 - single defect pixel is expected,
> > + *			1 - 2 adjacent defect pixels are expected, default 1.
> > + * @bp_gain:	Defines how 2nd derivation that passes through a
> defect pixel
> > + *		is different from 2nd derivations that pass through
> > + *		neighbor pixels. u4.2, range [0, 256], default 8.
> > + * @__reserved1:	reserved
> > + * @w0_coeff:	Blending coefficient of defect pixel correction.
> > + *		Precision u4, range [0, 8], default 8.
> > + * @__reserved2:	reserved
> > + * @w1_coeff:	Enable influence of incorrect defect pixel correction
> to be
> > + *		avoided. Precision u4, range [1, 8], default 8.
> > + * @__reserved3:	reserved
> > + */
> > +struct ipu3_uapi_bnr_static_config_bp_ctrl_config {
> > +	__u32 bp_thr_gain:5;
> > +	__u32 __reserved0:2;
> > +	__u32 defect_mode:1;
> > +	__u32 bp_gain:6;
> > +	__u32 __reserved1:18;
> > +	__u32 w0_coeff:4;
> > +	__u32 __reserved2:4;
> > +	__u32 w1_coeff:4;
> > +	__u32 __reserved3:20;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_bnr_static_config_dn_detect_ctrl_config - Denoising
> config
> > + *
> > + * @alpha:	Weight of central element of smoothing filter.
> > + * @beta:	Weight of peripheral elements of smoothing filter, default 4.
> > + * @gamma:	Weight of diagonal elements of smoothing filter, default 4.
> > + *
> > + * beta and gamma parameter define the strength of the noise removal
> filter.
> > + *		All above has precision u0.4, range [0, 0xf]
> > + *		format: u0.4 (no / zero bits represent whole number,
> > + *		4 bits represent the fractional part
> > + *		with each count representing 0.0625)
> > + *		e.g 0xf translates to 0.0625x15 = 0.9375
> > + *
> > + * @__reserved0:	reserved
> > + * @max_inf:	Maximum increase of peripheral or diagonal element
> influence
> > + *		relative to the pre-defined value range: [0x5, 0xa]
> > + * @__reserved1:	reserved
> > + * @gd_enable:	Green disparity enable control, 0 - disable, 1 - enable.
> > + * @bpc_enable:	Bad pixel correction enable control, 0 - disable, 1 -
> enable.
> > + * @bnr_enable:	Bayer noise removal enable control, 0 - disable, 1 -
> enable.
> > + * @ff_enable:	Fixed function enable, 0 - disable, 1 - enable.
> > + * @__reserved2:	reserved
> > + */
> > +struct ipu3_uapi_bnr_static_config_dn_detect_ctrl_config {
> > +	__u32 alpha:4;
> > +	__u32 beta:4;
> > +	__u32 gamma:4;
> > +	__u32 __reserved0:4;
> > +	__u32 max_inf:4;
> > +	__u32 __reserved1:7;
> > +	__u32 gd_enable:1;
> > +	__u32 bpc_enable:1;
> > +	__u32 bnr_enable:1;
> > +	__u32 ff_enable:1;
> > +	__u32 __reserved2:1;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_bnr_static_config_opt_center_sqr_config - BNR optical
> square
> > + *
> > + * @x_sqr_reset: Reset value of X^2.
> > + * @y_sqr_reset: Reset value of Y^2.
> > + *
> > + * Please note:
> > + *
> > + *    #. X and Y ref to
> > + *       &ipu3_uapi_bnr_static_config_opt_center_config
> > + *    #. Both structs are used in threshold formula to calculate r^2, where r
> > + *       is a radius of pixel [row, col] from centor of sensor.
> > + */
> > +struct ipu3_uapi_bnr_static_config_opt_center_sqr_config {
> > +	__u32 x_sqr_reset;
> > +	__u32 y_sqr_reset;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_bnr_static_config - BNR static config
> > + *
> > + * @wb_gains:	white balance gains
> &ipu3_uapi_bnr_static_config_wb_gains_config
> > + * @wb_gains_thr:	white balance gains threshold as defined by
> > + *			&ipu3_uapi_bnr_static_config_wb_gains_thr_config
> > + * @thr_coeffs:	coefficients of threshold
> > + *		&ipu3_uapi_bnr_static_config_thr_coeffs_config
> > + * @thr_ctrl_shd:	control of shading threshold
> > + *			&ipu3_uapi_bnr_static_config_thr_ctrl_shd_config
> > + * @opt_center:	optical center
> &ipu3_uapi_bnr_static_config_opt_center_config
> > + *
> > + * Above parameters and opt_center_sqr are used for white balance and
> shading.
> > + *
> > + * @lut:	lookup table &ipu3_uapi_bnr_static_config_lut_config
> > + * @bp_ctrl:	detect and remove bad pixels as defined in struct
> > + *		&ipu3_uapi_bnr_static_config_bp_ctrl_config
> > + * @dn_detect_ctrl:	detect and remove noise.
> > + *			&ipu3_uapi_bnr_static_config_dn_detect_ctrl_config
> > + * @column_size:	The number of pixels in column.
> > + * @opt_center_sqr:	Reset value of r^2 to optical center, see
> > + *
> 	&ipu3_uapi_bnr_static_config_opt_center_sqr_config.
> > + */
> > +struct ipu3_uapi_bnr_static_config {
> > +	struct ipu3_uapi_bnr_static_config_wb_gains_config wb_gains;
> > +	struct ipu3_uapi_bnr_static_config_wb_gains_thr_config
> wb_gains_thr;
> > +	struct ipu3_uapi_bnr_static_config_thr_coeffs_config thr_coeffs;
> > +	struct ipu3_uapi_bnr_static_config_thr_ctrl_shd_config thr_ctrl_shd;
> > +	struct ipu3_uapi_bnr_static_config_opt_center_config opt_center;
> > +	struct ipu3_uapi_bnr_static_config_lut_config lut;
> > +	struct ipu3_uapi_bnr_static_config_bp_ctrl_config bp_ctrl;
> > +	struct ipu3_uapi_bnr_static_config_dn_detect_ctrl_config
> dn_detect_ctrl;
> > +	__u32 column_size;
> > +	struct ipu3_uapi_bnr_static_config_opt_center_sqr_config
> opt_center_sqr;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_bnr_static_config_green_disparity - Correct green
> disparity
> > + *
> > + * @gd_red:	Shading gain coeff for gr disparity level in bright red region.
> > + *		Precision u0.6, default 4(0.0625).
> > + * @__reserved0:	reserved
> > + * @gd_green:	Shading gain coeff for gr disparity level in bright
> green
> > + *		region. Precision u0.6, default 4(0.0625).
> > + * @__reserved1:	reserved
> > + * @gd_blue:	Shading gain coeff for gr disparity level in bright blue
> region.
> > + *		Precision u0.6, default 4(0.0625).
> > + * @__reserved2:	reserved
> > + * @gd_black:	Maximal green disparity level in dark region (stronger
> disparity
> > + *		assumed to be image detail). Precision u14, default 80.
> > + * @__reserved3:	reserved
> > + * @gd_shading:	Change maximal green disparity level according to
> square
> > + *		distance from image center.
> > + * @__reserved4:	reserved
> > + * @gd_support:	Lower bound for the number of second green color
> pixels in
> > + *		current pixel neighborhood with less than threshold
> difference
> > + *		from it.
> > + *
> > + * The shading gain coeff of red, green, blue and black are used to
> calculate
> > + * threshold given a pixel's color value and its coordinates in the image.
> > + *
> > + * @__reserved5:	reserved
> > + * @gd_clip:	Turn green disparity clip on/off, [0, 1], default 1.
> > + * @gd_central_weight:	Central pixel weight in 9 pixels weighted sum.
> > + */
> > +struct ipu3_uapi_bnr_static_config_green_disparity {
> > +	__u32 gd_red:6;
> > +	__u32 __reserved0:2;
> > +	__u32 gd_green:6;
> > +	__u32 __reserved1:2;
> > +	__u32 gd_blue:6;
> > +	__u32 __reserved2:10;
> > +	__u32 gd_black:14;
> > +	__u32 __reserved3:2;
> > +	__u32 gd_shading:7;
> > +	__u32 __reserved4:1;
> > +	__u32 gd_support:2;
> > +	__u32 __reserved5:1;
> > +	__u32 gd_clip:1;
> > +	__u32 gd_central_weight:4;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_dm_config - De-mosaic parameters
> > + *
> > + * @dm_en:	de-mosaic enable.
> > + * @ch_ar_en:	Checker artifacts removal enable flag. Default 0.
> > + * @fcc_en:	False color correction (FCC) enable flag. Default 0.
> > + * @__reserved0:	reserved
> > + * @frame_width:	do not care
> > + * @gamma_sc:	Sharpening coefficient (coefficient of 2-d derivation
> of
> > + *		complementary color in Hamilton-Adams interpolation).
> > + *		u5, range [0, 31], default 8.
> > + * @__reserved1:	reserved
> > + * @lc_ctrl:	Parameter that controls weights of Chroma Homogeneity
> metric
> > + *		in calculation of final homogeneity metric.
> > + *		u5, range [0, 31], default 7.
> > + * @__reserved2:	reserved
> > + * @cr_param1:	First parameter that defines Checker artifact removal
> > + *		feature gain.Precision u5, range [0, 31], default 8.
> > + * @__reserved3:	reserved
> > + * @cr_param2:	Second parameter that defines Checker artifact
> removal
> > + *		feature gain. Precision u5, range [0, 31], default 8.
> > + * @__reserved4:	reserved
> > + * @coring_param:	Defines power of false color correction operation.
> > + *			low for preserving edge colors, high for preserving
> gray
> > + *			edge artifacts. u1.4, range [0, 1.9375], default 4(0.25).
> > + * @__reserved5:	reserved
> > + *
> > + * The demosaic fixed function block is responsible to covert
> Bayer(mosaiced)
> > + * images into color images based on demosaicing algorithm.
> > + */
> > +struct ipu3_uapi_dm_config {
> > +	__u32 dm_en:1;
> > +	__u32 ch_ar_en:1;
> > +	__u32 fcc_en:1;
> > +	__u32 __reserved0:13;
> > +	__u32 frame_width:16;
> > +
> > +	__u32 gamma_sc:5;
> > +	__u32 __reserved1:3;
> > +	__u32 lc_ctrl:5;
> > +	__u32 __reserved2:3;
> > +	__u32 cr_param1:5;
> > +	__u32 __reserved3:3;
> > +	__u32 cr_param2:5;
> > +	__u32 __reserved4:3;
> > +
> > +	__u32 coring_param:5;
> > +	__u32 __reserved5:27;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_ccm_mat_config - Color correction matrix
> > + *
> > + * @coeff_m11: CCM 3x3 coefficient, range [-65536, 65535]
> > + * @coeff_m12: CCM 3x3 coefficient, range [-8192, 8191]
> > + * @coeff_m13: CCM 3x3 coefficient, range [-32768, 32767]
> > + * @coeff_o_r: Bias 3x1 coefficient, range [-8191, 8181]
> > + * @coeff_m21: CCM 3x3 coefficient, range [-32767, 32767]
> > + * @coeff_m22: CCM 3x3 coefficient, range [-8192, 8191]
> > + * @coeff_m23: CCM 3x3 coefficient, range [-32768, 32767]
> > + * @coeff_o_g: Bias 3x1 coefficient, range [-8191, 8181]
> > + * @coeff_m31: CCM 3x3 coefficient, range [-32768, 32767]
> > + * @coeff_m32: CCM 3x3 coefficient, range [-8192, 8191]
> > + * @coeff_m33: CCM 3x3 coefficient, range [-32768, 32767]
> > + * @coeff_o_b: Bias 3x1 coefficient, range [-8191, 8181]
> > + *
> > + * Transform sensor specific color space to standard sRGB by applying 3x3
> matrix
> > + * and adding a bias vector O. The transformation is basically a rotation
> and
> > + * translation in the 3-dimensional color spaces. Here are the defaults:
> > + *
> > + *	9775,	-2671,	1087,	0
> > + *	-1071,	8303,	815,	0
> > + *	-23,	-7887,	16103,	0
> > + */
> > +struct ipu3_uapi_ccm_mat_config {
> > +	__s16 coeff_m11;
> > +	__s16 coeff_m12;
> > +	__s16 coeff_m13;
> > +	__s16 coeff_o_r;
> > +	__s16 coeff_m21;
> > +	__s16 coeff_m22;
> > +	__s16 coeff_m23;
> > +	__s16 coeff_o_g;
> > +	__s16 coeff_m31;
> > +	__s16 coeff_m32;
> > +	__s16 coeff_m33;
> > +	__s16 coeff_o_b;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_gamma_corr_ctrl - Gamma correction
> > + *
> > + * @enable: gamma correction enable.
> > + * @__reserved: reserved
> > + */
> > +struct ipu3_uapi_gamma_corr_ctrl {
> > +	__u32 enable:1;
> > +	__u32 __reserved:31;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_gamma_corr_lut - Per-pixel tone mapping
> implemented as LUT.
> > + *
> > + * @lut:	256 tabulated values of the gamma function. LUT[1]..
> LUT[256]
> > + *		format u13.0, range [0, 8191].
> > + *
> > + * The tone mapping operation is done by a Piece wise linear graph
> > + * that is implemented as a lookup table(LUT). The pixel component input
> > + * intensity is the X-axis of the graph which is the table entry.
> > + */
> > +struct ipu3_uapi_gamma_corr_lut {
> > +	__u16 lut[IPU3_UAPI_GAMMA_CORR_LUT_ENTRIES];
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_gamma_config - Gamma config
> > + *
> > + * @gc_ctrl: control of gamma correction &ipu3_uapi_gamma_corr_ctrl
> > + * @gc_lut: lookup table of gamma correction
> &ipu3_uapi_gamma_corr_lut
> > + */
> > +struct ipu3_uapi_gamma_config {
> > +	struct ipu3_uapi_gamma_corr_ctrl gc_ctrl
> __attribute__((aligned(32)));
> > +	struct ipu3_uapi_gamma_corr_lut gc_lut __attribute__((aligned(32)));
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_csc_mat_config - Color space conversion matrix config
> > + *
> > + * @coeff_c11:	Conversion matrix value, format s0.14, range [-1, 1],
> default 1.
> > + * @coeff_c12:	Conversion matrix value, format s0.14, range [-1, 1],
> default 0.
> > + * @coeff_c13:	Conversion matrix value, format s0.14, range [-1, 1],
> default 0.
> > + * @coeff_b1:	Bias 3x1 coefficient, s13,0 range [-8191, 8181],
> default 0.
> > + * @coeff_c21:	Conversion matrix value, format s0.14, range [-1, 1],
> default 0.
> > + * @coeff_c22:	Conversion matrix value, format s0.14, range [-1, 1],
> default 1.
> > + * @coeff_c23:	Conversion matrix value, format s0.14, range [-1, 1],
> default 0.
> > + * @coeff_b2:	Bias 3x1 coefficient, s13,0 range [-8191, 8181],
> default 0.
> > + * @coeff_c31:	Conversion matrix value, format s0.14, range [-1, 1],
> default 0.
> > + * @coeff_c32:	Conversion matrix value, format s0.14, range [-1, 1],
> default 0.
> > + * @coeff_c33:	Conversion matrix value, format s0.14, range [-1, 1],
> default 1.
> > + * @coeff_b3:	Bias 3x1 coefficient, s13,0 range [-8191, 8181],
> default 0.
> > + *
> > + * To transform each pixel from RGB to YUV (Y - brightness/luminance,
> > + * UV -chroma) by applying the pixel's values by a 3x3 matrix and adding
> an
> > + * optional bias 3x1 vector.
> > + */
> > +struct ipu3_uapi_csc_mat_config {
> > +	__s16 coeff_c11;
> > +	__s16 coeff_c12;
> > +	__s16 coeff_c13;
> > +	__s16 coeff_b1;
> > +	__s16 coeff_c21;
> > +	__s16 coeff_c22;
> > +	__s16 coeff_c23;
> > +	__s16 coeff_b2;
> > +	__s16 coeff_c31;
> > +	__s16 coeff_c32;
> > +	__s16 coeff_c33;
> > +	__s16 coeff_b3;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_cds_params - Chroma down-scaling
> > + *
> > + * @ds_c00:	range [0, 3]
> > + * @ds_c01:	range [0, 3]
> > + * @ds_c02:	range [0, 3]
> > + * @ds_c03:	range [0, 3]
> > + * @ds_c10:	range [0, 3]
> > + * @ds_c11:	range [0, 3]
> > + * @ds_c12:	range [0, 3]
> > + * @ds_c13:	range [0, 3]
> > + *
> > + * In case user does not provide, above 4x2 filter will use following
> defaults:
> > + *	1, 3, 3, 1,
> > + *	1, 3, 3, 1,
> > + *
> > + * @ds_nf:	Normalization factor for Chroma output downscaling filter,
> > + *		range 0,4, default 2.
> > + * @__reserved0:	reserved
> > + * @csc_en:	Color space conversion enable
> > + * @uv_bin_output:	0: output YUV 4.2.0, 1: output YUV 4.2.2(default).
> > + * @__reserved1:	reserved
> > + */
> > +struct ipu3_uapi_cds_params {
> > +	__u32 ds_c00:2;
> > +	__u32 ds_c01:2;
> > +	__u32 ds_c02:2;
> > +	__u32 ds_c03:2;
> > +	__u32 ds_c10:2;
> > +	__u32 ds_c11:2;
> > +	__u32 ds_c12:2;
> > +	__u32 ds_c13:2;
> > +	__u32 ds_nf:5;
> > +	__u32 __reserved0:3;
> > +	__u32 csc_en:1;
> > +	__u32 uv_bin_output:1;
> > +	__u32 __reserved1:6;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_shd_grid_config - Bayer shading(darkening) correction
> > + *
> > + * @width:	Grid horizontal dimensions, u8, [8, 128], default 73
> > + * @height:	Grid vertical dimensions, u8, [8, 128], default 56
> > + * @block_width_log2:	Log2 of the width of the grid cell in pixel
> count
> > + *			u4, [0, 15], default value 5.
> > + * @__reserved0:	reserved
> > + * @block_height_log2:	Log2 of the height of the grid cell in pixel
> count
> > + *			u4, [0, 15], default value 6.
> > + * @__reserved1:	reserved
> > + * @grid_height_per_slice:	SHD_MAX_CELLS_PER_SET/width.
> > + *				(with SHD_MAX_CELLS_PER_SET = 146).
> > + * @x_start:	X value of top left corner of sensor relative to ROI
> > + *		u12, [-4096, 0]. default 0, only negative values.
> > + * @y_start:	Y value of top left corner of sensor relative to ROI
> > + *		u12, [-4096, 0]. default 0, only negative values.
> > + */
> > +struct ipu3_uapi_shd_grid_config {
> > +	/* reg 0 */
> > +	__u8 width;
> > +	__u8 height;
> > +	__u8 block_width_log2:3;
> > +	__u8 __reserved0:1;
> > +	__u8 block_height_log2:3;
> > +	__u8 __reserved1:1;
> > +	__u8 grid_height_per_slice;
> > +	/* reg 1 */
> > +	__s16 x_start;
> > +	__s16 y_start;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_shd_general_config - Shading general config
> > + *
> > + * @init_set_vrt_offst_ul: set vertical offset,
> > + *			y_start >> block_height_log2 % grid_height_per_slice.
> > + * @shd_enable: shading enable.
> > + * @gain_factor: Gain factor. Shift calculated anti shading value. Precision
> u2.
> > + *		0x0 - gain factor [1, 5], means no shift interpolated value.
> > + *		0x1 - gain factor [1, 9], means shift interpolated by 1.
> > + *		0x2 - gain factor [1, 17], means shift interpolated by 2.
> > + * @__reserved: reserved
> > + *
> > + * Correction is performed by multiplying a gain factor for each of the 4
> Bayer
> > + * channels as a function of the pixel location in the sensor.
> > + */
> > +struct ipu3_uapi_shd_general_config {
> > +	__u32 init_set_vrt_offst_ul:8;
> > +	__u32 shd_enable:1;
> > +	__u32 gain_factor:2;
> > +	__u32 __reserved:21;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_shd_black_level_config - Black level correction
> > + *
> > + * @bl_r:	Bios values for green red. s11 range [-2048, 2047].
> > + * @bl_gr:	Bios values for green blue. s11 range [-2048, 2047].
> > + * @bl_gb:	Bios values for red. s11 range [-2048, 2047].
> > + * @bl_b:	Bios values for blue. s11 range [-2048, 2047].
> > + */
> > +struct ipu3_uapi_shd_black_level_config {
> > +	__s16 bl_r;
> > +	__s16 bl_gr;
> > +	__s16 bl_gb;
> > +	__s16 bl_b;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_shd_config_static - Shading config static
> > + *
> > + * @grid:	shading grid config &ipu3_uapi_shd_grid_config
> > + * @general:	shading general config &ipu3_uapi_shd_general_config
> > + * @black_level:	black level config for shading correction as defined by
> > + *			&ipu3_uapi_shd_black_level_config
> > + */
> > +struct ipu3_uapi_shd_config_static {
> > +	struct ipu3_uapi_shd_grid_config grid;
> > +	struct ipu3_uapi_shd_general_config general;
> > +	struct ipu3_uapi_shd_black_level_config black_level;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_shd_lut - Shading gain factor lookup table.
> > + *
> > + * @sets: array
> > + * @sets.r_and_gr: Red and GreenR Lookup table.
> > + * @sets.r_and_gr.r: Red shading factor.
> > + * @sets.r_and_gr.gr: GreenR shading factor.
> > + * @sets.__reserved1: reserved
> > + * @sets.gb_and_b: GreenB and Blue Lookup table.
> > + * @sets.gb_and_b.gb: GreenB shading factor.
> > + * @sets.gb_and_b.b: Blue shading factor.
> > + * @sets.__reserved2: reserved
> > + *
> > + * Map to shading correction LUT register set.
> > + */
> > +struct ipu3_uapi_shd_lut {
> > +	struct {
> > +		struct {
> > +			__u16 r;
> > +			__u16 gr;
> > +		} r_and_gr[IPU3_UAPI_SHD_MAX_CELLS_PER_SET];
> > +		__u8 __reserved1[24];
> > +		struct {
> > +			__u16 gb;
> > +			__u16 b;
> > +		} gb_and_b[IPU3_UAPI_SHD_MAX_CELLS_PER_SET];
> > +		__u8 __reserved2[24];
> > +	} sets[IPU3_UAPI_SHD_MAX_CFG_SETS];
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_shd_config - Shading config
> > + *
> > + * @shd:	shading static config, see &ipu3_uapi_shd_config_static
> > + * @shd_lut:	shading lookup table &ipu3_uapi_shd_lut
> > + */
> > +struct ipu3_uapi_shd_config {
> > +	struct ipu3_uapi_shd_config_static shd __attribute__((aligned(32)));
> > +	struct ipu3_uapi_shd_lut shd_lut __attribute__((aligned(32)));
> > +} __packed;
> > +
> > +/* Image Enhancement Filter directed */
> > +
> > +/**
> > + * struct ipu3_uapi_iefd_cux2 - IEFd Config Unit 2 parameters
> > + *
> > + * @x0:		X0 point of Config Unit, u9.0, default 0.
> > + * @x1:		X1 point of Config Unit, u9.0, default 0.
> > + * @a01:	Slope A of Config Unit, s4.4, default 0.
> > + * @b01:	Always 0.
> > + *
> > + * Calculate weight for blending directed and non-directed denoise
> elements
> > + *
> > + * Note:
> > + * Each instance of Config Unit needs X coordinate of n points and
> > + * slope A factor between points calculated by driver based on calibration
> > + * parameters.
> > + */
> > +struct ipu3_uapi_iefd_cux2 {
> > +	__u32 x0:9;
> > +	__u32 x1:9;
> > +	__u32 a01:9;
> > +	__u32 b01:5;	/* NOTE: hardcoded to zero */
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_iefd_cux6_ed - Calculate power of non-directed
> sharpening
> > + *				   element, Config Unit 6 for edge detail (ED).
> > + *
> > + * @x0:	X coordinate of point 0, u9.0, default 0.
> > + * @x1:	X coordinate of point 1, u9.0, default 0.
> > + * @x2:	X coordinate of point 2, u9.0, default 0.
> > + * @__reserved0:	reserved
> > + * @x3:	X coordinate of point 3, u9.0, default 0.
> > + * @x4:	X coordinate of point 4, u9.0, default 0.
> > + * @x5:	X coordinate of point 5, u9.0, default 0.
> > + * @__reserved1:	reserved
> > + * @a01:	slope A points 01, s4.4, default 0.
> > + * @a12:	slope A points 12, s4.4, default 0.
> > + * @a23:	slope A points 23, s4.4, default 0.
> > + * @__reserved2:	reserved
> > + * @a34:	slope A points 34, s4.4, default 0.
> > + * @a45:	slope A points 45, s4.4, default 0.
> > + * @__reserved3:	reserved
> > + * @b01:	slope B points 01, s4.4, default 0.
> > + * @b12:	slope B points 12, s4.4, default 0.
> > + * @b23:	slope B points 23, s4.4, default 0.
> > + * @__reserved4:	reserved
> > + * @b34:	slope B points 34, s4.4, default 0.
> > + * @b45:	slope B points 45, s4.4, default 0.
> > + * @__reserved5:	reserved
> > + */
> > +struct ipu3_uapi_iefd_cux6_ed {
> > +	__u32 x0:9;
> > +	__u32 x1:9;
> > +	__u32 x2:9;
> > +	__u32 __reserved0:5;
> > +
> > +	__u32 x3:9;
> > +	__u32 x4:9;
> > +	__u32 x5:9;
> > +	__u32 __reserved1:5;
> > +
> > +	__u32 a01:9;
> > +	__u32 a12:9;
> > +	__u32 a23:9;
> > +	__u32 __reserved2:5;
> > +
> > +	__u32 a34:9;
> > +	__u32 a45:9;
> > +	__u32 __reserved3:14;
> > +
> > +	__u32 b01:9;
> > +	__u32 b12:9;
> > +	__u32 b23:9;
> > +	__u32 __reserved4:5;
> > +
> > +	__u32 b34:9;
> > +	__u32 b45:9;
> > +	__u32 __reserved5:14;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_iefd_cux2_1 - Calculate power of non-directed denoise
> > + *				  element apply.
> > + * @x0: X0 point of Config Unit, u9.0, default 0.
> > + * @x1: X1 point of Config Unit, u9.0, default 0.
> > + * @a01: Slope A of Config Unit, s4.4, default 0.
> > + * @__reserved1: reserved
> > + * @b01: offset B0 of Config Unit, u7.0, default 0.
> > + * @__reserved2: reserved
> > + */
> > +struct ipu3_uapi_iefd_cux2_1 {
> > +	__u32 x0:9;
> > +	__u32 x1:9;
> > +	__u32 a01:9;
> > +	__u32 __reserved1:5;
> > +
> > +	__u32 b01:8;
> > +	__u32 __reserved2:24;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_iefd_cux4 - Calculate power of non-directed
> sharpening
> > + *				element.
> > + *
> > + * @x0:	X0 point of Config Unit, u9.0, default 0.
> > + * @x1:	X1 point of Config Unit, u9.0, default 0.
> > + * @x2:	X2 point of Config Unit, u9.0, default 0.
> > + * @__reserved0:	reserved
> > + * @x3:	X3 point of Config Unit, u9.0, default 0.
> > + * @a01:	Slope A0 of Config Unit, s4.4, default 0.
> > + * @a12:	Slope A1 of Config Unit, s4.4, default 0.
> > + * @__reserved1:	reserved
> > + * @a23:	Slope A2 of Config Unit, s4.4, default 0.
> > + * @b01:	Offset B0 of Config Unit, s7.0, default 0.
> > + * @b12:	Offset B1 of Config Unit, s7.0, default 0.
> > + * @__reserved2:	reserved
> > + * @b23:	Offset B2 of Config Unit, s7.0, default 0.
> > + * @__reserved3: reserved
> > + */
> > +struct ipu3_uapi_iefd_cux4 {
> > +	__u32 x0:9;
> > +	__u32 x1:9;
> > +	__u32 x2:9;
> > +	__u32 __reserved0:5;
> > +
> > +	__u32 x3:9;
> > +	__u32 a01:9;
> > +	__u32 a12:9;
> > +	__u32 __reserved1:5;
> > +
> > +	__u32 a23:9;
> > +	__u32 b01:8;
> > +	__u32 b12:8;
> > +	__u32 __reserved2:7;
> > +
> > +	__u32 b23:8;
> > +	__u32 __reserved3:24;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_iefd_cux6_rad - Radial Config Unit (CU)
> > + *
> > + * @x0:	x0 points of Config Unit radial, u8.0
> > + * @x1:	x1 points of Config Unit radial, u8.0
> > + * @x2:	x2 points of Config Unit radial, u8.0
> > + * @x3:	x3 points of Config Unit radial, u8.0
> > + * @x4:	x4 points of Config Unit radial, u8.0
> > + * @x5:	x5 points of Config Unit radial, u8.0
> > + * @__reserved1: reserved
> > + * @a01:	Slope A of Config Unit radial, s7.8
> > + * @a12:	Slope A of Config Unit radial, s7.8
> > + * @a23:	Slope A of Config Unit radial, s7.8
> > + * @a34:	Slope A of Config Unit radial, s7.8
> > + * @a45:	Slope A of Config Unit radial, s7.8
> > + * @__reserved2: reserved
> > + * @b01:	Slope B of Config Unit radial, s9.0
> > + * @b12:	Slope B of Config Unit radial, s9.0
> > + * @b23:	Slope B of Config Unit radial, s9.0
> > + * @__reserved4: reserved
> > + * @b34:	Slope B of Config Unit radial, s9.0
> > + * @b45:	Slope B of Config Unit radial, s9.0
> > + * @__reserved5: reserved
> > + */
> > +struct ipu3_uapi_iefd_cux6_rad {
> > +	__u32 x0:8;
> > +	__u32 x1:8;
> > +	__u32 x2:8;
> > +	__u32 x3:8;
> > +
> > +	__u32 x4:8;
> > +	__u32 x5:8;
> > +	__u32 __reserved1:16;
> > +
> > +	__u32 a01:16;
> > +	__u32 a12:16;
> > +
> > +	__u32 a23:16;
> > +	__u32 a34:16;
> > +
> > +	__u32 a45:16;
> > +	__u32 __reserved2:16;
> > +
> > +	__u32 b01:10;
> > +	__u32 b12:10;
> > +	__u32 b23:10;
> > +	__u32 __reserved4:2;
> > +
> > +	__u32 b34:10;
> > +	__u32 b45:10;
> > +	__u32 __reserved5:12;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_yuvp1_iefd_cfg_units - IEFd Config Units parameters
> > + *
> > + * @cu_1: calculate weight for blending directed and
> > + *	  non-directed denoise elements. See &ipu3_uapi_iefd_cux2
> > + * @cu_ed: calculate power of non-directed sharpening element, see
> > + *	   &ipu3_uapi_iefd_cux6_ed
> > + * @cu_3: calculate weight for blending directed and
> > + *	  non-directed denoise elements. A &ipu3_uapi_iefd_cux2
> > + * @cu_5: calculate power of non-directed denoise element apply, use
> > + *	  &ipu3_uapi_iefd_cux2_1
> > + * @cu_6: calculate power of non-directed sharpening element. See
> > + *	  &ipu3_uapi_iefd_cux4
> > + * @cu_7: calculate weight for blending directed and
> > + *	  non-directed denoise elements. Use &ipu3_uapi_iefd_cux2
> > + * @cu_unsharp: Config Unit of unsharp &ipu3_uapi_iefd_cux4
> > + * @cu_radial: Config Unit of radial &ipu3_uapi_iefd_cux6_rad
> > + * @cu_vssnlm: Config Unit of vssnlm &ipu3_uapi_iefd_cux2
> > + */
> > +struct ipu3_uapi_yuvp1_iefd_cfg_units {
> > +	struct ipu3_uapi_iefd_cux2 cu_1;
> > +	struct ipu3_uapi_iefd_cux6_ed cu_ed;
> > +	struct ipu3_uapi_iefd_cux2 cu_3;
> > +	struct ipu3_uapi_iefd_cux2_1 cu_5;
> > +	struct ipu3_uapi_iefd_cux4 cu_6;
> > +	struct ipu3_uapi_iefd_cux2 cu_7;
> > +	struct ipu3_uapi_iefd_cux4 cu_unsharp;
> > +	struct ipu3_uapi_iefd_cux6_rad cu_radial;
> > +	struct ipu3_uapi_iefd_cux2 cu_vssnlm;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_yuvp1_iefd_config_s - IEFd config
> > + *
> > + * @horver_diag_coeff: Gradiant compensation, coefficient that
> compensates for
> > + *		       different distance for vertical / horizontal and diagonal
> > + *		       * gradient calculation (~1/sqrt(2)).
> > + * @__reserved0: reserved
> > + * @clamp_stitch: Slope to stitch between clamped and unclamped edge
> values
> > + * @__reserved1: reserved
> > + * @direct_metric_update: Update coeff for direction metric
> > + * @__reserved2: reserved
> > + * @ed_horver_diag_coeff: Radial Coefficient that compensates for
> > + *			  different distance for vertical/horizontal and
> > + *			  diagonal gradient calculation (~1/sqrt(2))
> > + * @__reserved3: reserved
> > + */
> > +struct ipu3_uapi_yuvp1_iefd_config_s {
> > +	__u32 horver_diag_coeff:7;
> > +	__u32 __reserved0:1;
> > +	__u32 clamp_stitch:6;
> > +	__u32 __reserved1:2;
> > +	__u32 direct_metric_update:5;
> > +	__u32 __reserved2:3;
> > +	__u32 ed_horver_diag_coeff:7;
> > +	__u32 __reserved3:1;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_yuvp1_iefd_control - IEFd control
> > + *
> > + * @iefd_en:	Enable IEFd
> > + * @denoise_en:	Enable denoise
> > + * @direct_smooth_en:	Enable directional smooth
> > + * @rad_en:	Enable radial update
> > + * @vssnlm_en:	Enable VSSNLM output filter
> > + * @__reserved:	reserved
> > + */
> > +struct ipu3_uapi_yuvp1_iefd_control {
> > +	__u32 iefd_en:1;
> > +	__u32 denoise_en:1;
> > +	__u32 direct_smooth_en:1;
> > +	__u32 rad_en:1;
> > +	__u32 vssnlm_en:1;
> > +	__u32 __reserved:27;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_sharp_cfg - Sharpening config
> > + *
> > + * @nega_lmt_txt: Sharpening limit for negative overshoots for texture.
> > + * @__reserved0: reserved
> > + * @posi_lmt_txt: Sharpening limit for positive overshoots for texture.
> > + * @__reserved1: reserved
> > + * @nega_lmt_dir: Sharpening limit for negative overshoots for direction
> (edge).
> > + * @__reserved2: reserved
> > + * @posi_lmt_dir: Sharpening limit for positive overshoots for direction
> (edge).
> > + * @__reserved3: reserved
> > + *
> > + * Fixed point type u13.0, range [0, 8191].
> > + */
> > +struct ipu3_uapi_sharp_cfg {
> > +	__u32 nega_lmt_txt:13;
> > +	__u32 __reserved0:19;
> > +	__u32 posi_lmt_txt:13;
> > +	__u32 __reserved1:19;
> > +	__u32 nega_lmt_dir:13;
> > +	__u32 __reserved2:19;
> > +	__u32 posi_lmt_dir:13;
> > +	__u32 __reserved3:19;
> > +} __packed;
> > +
> > +/**
> > + * struct struct ipu3_uapi_far_w - Sharpening config for far sub-group
> > + *
> > + * @dir_shrp:	Weight of wide direct sharpening, u1.6, range [0, 64],
> default 64.
> > + * @__reserved0:	reserved
> > + * @dir_dns:	Weight of wide direct denoising, u1.6, range [0, 64],
> default 0.
> > + * @__reserved1:	reserved
> > + * @ndir_dns_powr:	Power of non-direct denoising,
> > + *			Precision u1.6, range [0, 64], default 64.
> > + * @__reserved2:	reserved
> > + */
> > +struct ipu3_uapi_far_w {
> > +	__u32 dir_shrp:7;
> > +	__u32 __reserved0:1;
> > +	__u32 dir_dns:7;
> > +	__u32 __reserved1:1;
> > +	__u32 ndir_dns_powr:7;
> > +	__u32 __reserved2:9;
> > +} __packed;
> > +
> > +/**
> > + * struct struct ipu3_uapi_unsharp_cfg - Unsharp config
> > + *
> > + * @unsharp_weight: Unsharp mask blending weight.
> > + *		    u1.6, range [0, 64], default 16.
> > + *		    0 - disabled, 64 - use only unsharp.
> > + * @__reserved0: reserved
> > + * @unsharp_amount: Unsharp mask amount, u4.5, range [0, 511],
> default 0.
> > + * @__reserved1: reserved
> > + */
> > +struct ipu3_uapi_unsharp_cfg {
> > +	__u32 unsharp_weight:7;
> > +	__u32 __reserved0:1;
> > +	__u32 unsharp_amount:9;
> > +	__u32 __reserved1:15;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_yuvp1_iefd_shrp_cfg - IEFd sharpness config
> > + *
> > + * @cfg: sharpness config &ipu3_uapi_sharp_cfg
> > + * @far_w: wide range config, value as specified by &ipu3_uapi_far_w:
> > + *	The 5x5 environment is separated into 2 sub-groups, the 3x3 nearest
> > + *	neighbors (8 pixels called Near), and the second order neighborhood
> > + *	around them (16 pixels called Far).
> > + * @unshrp_cfg: unsharpness config. &ipu3_uapi_unsharp_cfg
> > + */
> > +struct ipu3_uapi_yuvp1_iefd_shrp_cfg {
> > +	struct ipu3_uapi_sharp_cfg cfg;
> > +	struct ipu3_uapi_far_w far_w;
> > +	struct ipu3_uapi_unsharp_cfg unshrp_cfg;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_unsharp_coef0 - Unsharp mask coefficients
> > + *
> > + * @c00: Coeff11, s0.8, range [-255, 255], default 1.
> > + * @c01: Coeff12, s0.8, range [-255, 255], default 5.
> > + * @c02: Coeff13, s0.8, range [-255, 255], default 9.
> > + * @__reserved: reserved
> > + *
> > + * Configurable registers for common sharpening support.
> > + */
> > +struct ipu3_uapi_unsharp_coef0 {
> > +	__u32 c00:9;
> > +	__u32 c01:9;
> > +	__u32 c02:9;
> > +	__u32 __reserved:5;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_unsharp_coef1 - Unsharp mask coefficients
> > + *
> > + * @c11: Coeff22, s0.8, range [-255, 255], default 29.
> > + * @c12: Coeff23, s0.8, range [-255, 255], default 55.
> > + * @c22: Coeff33, s0.8, range [-255, 255], default 96.
> > + * @__reserved: reserved
> > + */
> > +struct ipu3_uapi_unsharp_coef1 {
> > +	__u32 c11:9;
> > +	__u32 c12:9;
> > +	__u32 c22:9;
> > +	__u32 __reserved:5;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_yuvp1_iefd_unshrp_cfg - Unsharp mask config
> > + *
> > + * @unsharp_coef0: unsharp coefficient 0 config. See
> &ipu3_uapi_unsharp_coef0
> > + * @unsharp_coef1: unsharp coefficient 1 config. See
> &ipu3_uapi_unsharp_coef1
> > + */
> > +struct ipu3_uapi_yuvp1_iefd_unshrp_cfg {
> > +	struct ipu3_uapi_unsharp_coef0 unsharp_coef0;
> > +	struct ipu3_uapi_unsharp_coef1 unsharp_coef1;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_radial_reset_xy - Radial coordinate reset
> > + *
> > + * @x:	Radial reset of x coordinate. Precision s12, [-4095, 4095],
> default 0.
> > + * @__reserved0:	reserved
> > + * @y:	Radial center y coordinate. Precision s12, [-4095, 4095],
> default 0.
> > + * @__reserved1:	reserved
> > + */
> > +struct ipu3_uapi_radial_reset_xy {
> > +	__s32 x:13;
> > +	__u32 __reserved0:3;
> > +	__s32 y:13;
> > +	__u32 __reserved1:3;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_radial_reset_x2 - Radial X^2 reset
> > + *
> > + * @x2:	Radial reset of x^2 coordinate. Precision u24, default 0.
> > + * @__reserved:	reserved
> > + */
> > +struct ipu3_uapi_radial_reset_x2 {
> > +	__u32 x2:24;
> > +	__u32 __reserved:8;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_radial_reset_y2 - Radial Y^2 reset
> > + *
> > + * @y2:	Radial reset of y^2 coordinate. Precision u24, default 0.
> > + * @__reserved:	reserved
> > + */
> > +struct ipu3_uapi_radial_reset_y2 {
> > +	__u32 y2:24;
> > +	__u32 __reserved:8;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_radial_cfg - Radial config
> > + *
> > + * @rad_nf: Radial. R^2 normalization factor is scale down by 2^ - (15 +
> scale)
> > + * @__reserved0: reserved
> > + * @rad_inv_r2: Radial R^-2 normelized to (0.5..1), Prec' u7, range [0, 127].
> > + * @__reserved1: reserved
> > + */
> > +struct ipu3_uapi_radial_cfg {
> > +	__u32 rad_nf:4;
> > +	__u32 __reserved0:4;
> > +	__u32 rad_inv_r2:7;
> > +	__u32 __reserved1:17;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_rad_far_w - Radial FAR sub-group
> > + *
> > + * @rad_dir_far_sharp_w: Weight of wide direct sharpening, u1.6, range
> [0, 64],
> > + *			 default 64.
> > + * @rad_dir_far_dns_w: Weight of wide direct denoising, u1.6, range [0,
> 64],
> > + *			 default 0.
> > + * @rad_ndir_far_dns_power: power of non-direct sharpening, u1.6,
> range [0, 64],
> > + *			 default 0.
> > + * @__reserved: reserved
> > + */
> > +struct ipu3_uapi_rad_far_w {
> > +	__u32 rad_dir_far_sharp_w:8;
> > +	__u32 rad_dir_far_dns_w:8;
> > +	__u32 rad_ndir_far_dns_power:8;
> > +	__u32 __reserved:8;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_cu_cfg0 - Radius Config Unit cfg0 register
> > + *
> > + * @cu6_pow: Power of CU6. Power of non-direct sharpening, u3.4.
> > + * @__reserved0: reserved
> > + * @cu_unsharp_pow: Power of unsharp mask, u2.4.
> > + * @__reserved1: reserved
> > + * @rad_cu6_pow: Radial/corner CU6. Directed sharpening power, u3.4.
> > + * @__reserved2: reserved
> > + * @rad_cu_unsharp_pow: Radial power of unsharp mask, u2.4.
> > + * @__reserved3: reserved
> > + */
> > +struct ipu3_uapi_cu_cfg0 {
> > +	__u32 cu6_pow:7;
> > +	__u32 __reserved0:1;
> > +	__u32 cu_unsharp_pow:7;
> > +	__u32 __reserved1:1;
> > +	__u32 rad_cu6_pow:7;
> > +	__u32 __reserved2:1;
> > +	__u32 rad_cu_unsharp_pow:6;
> > +	__u32 __reserved3:2;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_cu_cfg1 - Radius Config Unit cfg1 register
> > + *
> > + * @rad_cu6_x1: X1 point of Config Unit 6, precision u9.0.
> > + * @__reserved0: reserved
> > + * @rad_cu_unsharp_x1: X1 point for Config Unit unsharp for
> radial/corner point
> > + *			precision u9.0.
> > + * @__reserved1: reserved
> > + */
> > +struct ipu3_uapi_cu_cfg1 {
> > +	__u32 rad_cu6_x1:9;
> > +	__u32 __reserved0:1;
> > +	__u32 rad_cu_unsharp_x1:9;
> > +	__u32 __reserved1:13;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_yuvp1_iefd_rad_cfg - IEFd parameters changed
> radially over
> > + *					 the picture plain.
> > + *
> > + * @reset_xy: reset xy value in radial calculation.
> &ipu3_uapi_radial_reset_xy
> > + * @reset_x2: reset x square value in radial calculation. See struct
> > + *	      &ipu3_uapi_radial_reset_x2
> > + * @reset_y2: reset y square value in radial calculation. See struct
> > + *	      &ipu3_uapi_radial_reset_y2
> > + * @cfg: radial config defined in &ipu3_uapi_radial_cfg
> > + * @rad_far_w: weight for wide range radial. &ipu3_uapi_rad_far_w
> > + * @cu_cfg0: configuration unit 0. See &ipu3_uapi_cu_cfg0
> > + * @cu_cfg1: configuration unit 1. See &ipu3_uapi_cu_cfg1
> > + */
> > +struct ipu3_uapi_yuvp1_iefd_rad_cfg {
> > +	struct ipu3_uapi_radial_reset_xy reset_xy;
> > +	struct ipu3_uapi_radial_reset_x2 reset_x2;
> > +	struct ipu3_uapi_radial_reset_y2 reset_y2;
> > +	struct ipu3_uapi_radial_cfg cfg;
> > +	struct ipu3_uapi_rad_far_w rad_far_w;
> > +	struct ipu3_uapi_cu_cfg0 cu_cfg0;
> > +	struct ipu3_uapi_cu_cfg1 cu_cfg1;
> > +} __packed;
> > +
> > +/* Vssnlm - Very small scale non-local mean algorithm */
> > +
> > +/**
> > + * struct ipu3_uapi_vss_lut_x - Vssnlm LUT x0/x1/x2
> > + *
> > + * @vs_x0: Vssnlm LUT x0, precision u8, range [0, 255], default 16.
> > + * @vs_x1: Vssnlm LUT x1, precision u8, range [0, 255], default 32.
> > + * @vs_x2: Vssnlm LUT x2, precision u8, range [0, 255], default 64.
> > + * @__reserved2: reserved
> > + */
> > +struct ipu3_uapi_vss_lut_x {
> > +	__u32 vs_x0:8;
> > +	__u32 vs_x1:8;
> > +	__u32 vs_x2:8;
> > +	__u32 __reserved2:8;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_vss_lut_y - Vssnlm LUT y0/y1/y2
> > + *
> > + * @vs_y1: Vssnlm LUT y1, precision u4, range [0, 8], default 1.
> > + * @__reserved0: reserved
> > + * @vs_y2: Vssnlm LUT y2, precision u4, range [0, 8], default 3.
> > + * @__reserved1: reserved
> > + * @vs_y3: Vssnlm LUT y3, precision u4, range [0, 8], default 8.
> > + * @__reserved2: reserved
> > + */
> > +struct ipu3_uapi_vss_lut_y {
> > +	__u32 vs_y1:4;
> > +	__u32 __reserved0:4;
> > +	__u32 vs_y2:4;
> > +	__u32 __reserved1:4;
> > +	__u32 vs_y3:4;
> > +	__u32 __reserved2:12;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_yuvp1_iefd_vssnlm_cf - IEFd Vssnlm Lookup table
> > + *
> > + * @vss_lut_x: vss lookup table. See &ipu3_uapi_vss_lut_x description
> > + * @vss_lut_y: vss lookup table. See &ipu3_uapi_vss_lut_y description
> > + */
> > +struct ipu3_uapi_yuvp1_iefd_vssnlm_cfg {
> > +	struct ipu3_uapi_vss_lut_x vss_lut_x;
> > +	struct ipu3_uapi_vss_lut_y vss_lut_y;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_yuvp1_iefd_config - IEFd config
> > + *
> > + * @units: configuration unit setting, &ipu3_uapi_yuvp1_iefd_cfg_units
> > + * @config: configuration, as defined by &ipu3_uapi_yuvp1_iefd_config_s
> > + * @control: control setting, as defined by
> &ipu3_uapi_yuvp1_iefd_control
> > + * @sharp: sharpness setting, as defined by
> &ipu3_uapi_yuvp1_iefd_shrp_cfg
> > + * @unsharp: unsharpness setting, as defined by
> &ipu3_uapi_yuvp1_iefd_unshrp_cfg
> > + * @rad: radial setting, as defined by &ipu3_uapi_yuvp1_iefd_rad_cfg
> > + * @vsslnm: vsslnm setting, as defined by
> &ipu3_uapi_yuvp1_iefd_vssnlm_cfg
> > + */
> > +struct ipu3_uapi_yuvp1_iefd_config {
> > +	struct ipu3_uapi_yuvp1_iefd_cfg_units units;
> > +	struct ipu3_uapi_yuvp1_iefd_config_s config;
> > +	struct ipu3_uapi_yuvp1_iefd_control control;
> > +	struct ipu3_uapi_yuvp1_iefd_shrp_cfg sharp;
> > +	struct ipu3_uapi_yuvp1_iefd_unshrp_cfg unsharp;
> > +	struct ipu3_uapi_yuvp1_iefd_rad_cfg rad;
> > +	struct ipu3_uapi_yuvp1_iefd_vssnlm_cfg vsslnm;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_yuvp1_yds_config - Y Down-Sampling config
> > + *
> > + * @c00: range [0, 3], default 0x0
> > + * @c01: range [0, 3], default 0x1
> > + * @c02: range [0, 3], default 0x1
> > + * @c03: range [0, 3], default 0x0
> > + * @c10: range [0, 3], default 0x0
> > + * @c11: range [0, 3], default 0x1
> > + * @c12: range [0, 3], default 0x1
> > + * @c13: range [0, 3], default 0x0
> > + *
> > + * Above are 4x2 filter coefficients for chroma output downscaling.
> > + *
> > + * @norm_factor: Normalization factor, range [0, 4], default 2
> > + *		0 - divide by 1
> > + *		1 - divide by 2
> > + *		2 - divide by 4
> > + *		3 - divide by 8
> > + *		4 - divide by 16
> > + * @__reserved0: reserved
> > + * @bin_output: Down sampling on Luma channel in two optional modes
> > + *		0 - Bin output 4.2.0 (default), 1 output 4.2.2.
> > + * @__reserved1: reserved
> > + */
> > +struct ipu3_uapi_yuvp1_yds_config {
> > +	__u32 c00:2;
> > +	__u32 c01:2;
> > +	__u32 c02:2;
> > +	__u32 c03:2;
> > +	__u32 c10:2;
> > +	__u32 c11:2;
> > +	__u32 c12:2;
> > +	__u32 c13:2;
> > +	__u32 norm_factor:5;
> > +	__u32 __reserved0:4;
> > +	__u32 bin_output:1;
> > +	__u32 __reserved1:6;
> > +} __packed;
> > +
> > +/* Chroma Noise Reduction */
> > +
> > +/**
> > + * struct ipu3_uapi_yuvp1_chnr_enable_config - Chroma noise reduction
> enable
> > + *
> > + * @enable: enable/disable chroma noise reduction
> > + * @yuv_mode: 0 - YUV420, 1 - YUV422
> > + * @__reserved0: reserved
> > + * @col_size: number of columns in the frame, max width is 2560
> > + * @__reserved1: reserved
> > + */
> > +struct ipu3_uapi_yuvp1_chnr_enable_config {
> > +	__u32 enable:1;
> > +	__u32 yuv_mode:1;
> > +	__u32 __reserved0:14;
> > +	__u32 col_size:12;
> > +	__u32 __reserved1:4;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_yuvp1_chnr_coring_config - Coring thresholds for UV
> > + *
> > + * @u: U coring level, u0.13, range [0.0, 1.0], default 0.0
> > + * @__reserved0: reserved
> > + * @v: V coring level, u0.13, range [0.0, 1.0], default 0.0
> > + * @__reserved1: reserved
> > + */
> > +struct ipu3_uapi_yuvp1_chnr_coring_config {
> > +	__u32 u:13;
> > +	__u32 __reserved0:3;
> > +	__u32 v:13;
> > +	__u32 __reserved1:3;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_yuvp1_chnr_sense_gain_config - Chroma noise
> reduction gains
> > + *
> > + * All sensitivity gain parameters have precision u13.0, range [0, 8191].
> > + *
> > + * @vy: Sensitivity of horizontal edge of Y, default 100
> > + * @vu: Sensitivity of horizontal edge of U, default 100
> > + * @vv: Sensitivity of horizontal edge of V, default 100
> > + * @__reserved0: reserved
> > + * @hy: Sensitivity of vertical edge of Y, default 50
> > + * @hu: Sensitivity of vertical edge of U, default 50
> > + * @hv: Sensitivity of vertical edge of V, default 50
> > + * @__reserved1: reserved
> > + */
> > +struct ipu3_uapi_yuvp1_chnr_sense_gain_config {
> > +	__u32 vy:8;
> > +	__u32 vu:8;
> > +	__u32 vv:8;
> > +	__u32 __reserved0:8;
> > +
> > +	__u32 hy:8;
> > +	__u32 hu:8;
> > +	__u32 hv:8;
> > +	__u32 __reserved1:8;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_yuvp1_chnr_iir_fir_config - Chroma IIR/FIR filter config
> > + *
> > + * @fir_0h: Value of center tap in horizontal FIR, range [0, 32], default 8.
> > + * @__reserved0: reserved
> > + * @fir_1h: Value of distance 1 in horizontal FIR, range [0, 32], default 12.
> > + * @__reserved1: reserved
> > + * @fir_2h: Value of distance 2 tap in horizontal FIR, range [0, 32], default
> 0.
> > + * @dalpha_clip_val: weight for previous row in IIR, range [1, 256], default
> 0.
> > + * @__reserved2: reserved
> > + */
> > +struct ipu3_uapi_yuvp1_chnr_iir_fir_config {
> > +	__u32 fir_0h:6;
> > +	__u32 __reserved0:2;
> > +	__u32 fir_1h:6;
> > +	__u32 __reserved1:2;
> > +	__u32 fir_2h:6;
> > +	__u32 dalpha_clip_val:9;
> > +	__u32 __reserved2:1;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_yuvp1_chnr_config - Chroma noise reduction config
> > + *
> > + * @enable: chroma noise reduction enable, see
> > + *	    &ipu3_uapi_yuvp1_chnr_enable_config
> > + * @coring: coring config for chroma noise reduction, see
> > + *	    &ipu3_uapi_yuvp1_chnr_coring_config
> > + * @sense_gain: sensitivity config for chroma noise reduction, see
> > + *		ipu3_uapi_yuvp1_chnr_sense_gain_config
> > + * @iir_fir: iir and fir config for chroma noise reduction, see
> > + *	     ipu3_uapi_yuvp1_chnr_iir_fir_config
> > + */
> > +struct ipu3_uapi_yuvp1_chnr_config {
> > +	struct ipu3_uapi_yuvp1_chnr_enable_config enable;
> > +	struct ipu3_uapi_yuvp1_chnr_coring_config coring;
> > +	struct ipu3_uapi_yuvp1_chnr_sense_gain_config sense_gain;
> > +	struct ipu3_uapi_yuvp1_chnr_iir_fir_config iir_fir;
> > +} __packed;
> > +
> > +/* Edge Enhancement and Noise Reduction */
> > +
> > +/**
> > + * struct ipu3_uapi_yuvp1_y_ee_nr_lpf_config - Luma(Y) edge
> enhancement low-pass
> > + *					       filter coefficients
> > + *
> > + * @a_diag: Smoothing diagonal coefficient, u5.0.
> > + * @__reserved0: reserved
> > + * @a_periph: Image smoothing perpherial, u5.0.
> > + * @__reserved1: reserved
> > + * @a_cent: Image Smoothing center coefficient, u5.0.
> > + * @__reserved2: reserved
> > + * @enable: 0: Y_EE_NR disabled, output = input; 1: Y_EE_NR enabled.
> > + */
> > +struct ipu3_uapi_yuvp1_y_ee_nr_lpf_config {
> > +	__u32 a_diag:5;
> > +	__u32 __reserved0:3;
> > +	__u32 a_periph:5;
> > +	__u32 __reserved1:3;
> > +	__u32 a_cent:5;
> > +	__u32 __reserved2:9;
> > +	__u32 enable:1;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_yuvp1_y_ee_nr_sense_config - Luma(Y) edge
> enhancement
> > + *					noise reduction sensitivity gains
> > + *
> > + * @edge_sense_0: Sensitivity of edge in dark area. u13.0, default 8191.
> > + * @__reserved0: reserved
> > + * @delta_edge_sense: Difference in the sensitivity of edges between
> > + *		      the bright and dark areas. u13.0, default 0.
> > + * @__reserved1: reserved
> > + * @corner_sense_0: Sensitivity of corner in dark area. u13.0, default 0.
> > + * @__reserved2: reserved
> > + * @delta_corner_sense: Difference in the sensitivity of corners between
> > + *			the bright and dark areas. u13.0, default 8191.
> > + * @__reserved3: reserved
> > + */
> > +struct ipu3_uapi_yuvp1_y_ee_nr_sense_config {
> > +	__u32 edge_sense_0:13;
> > +	__u32 __reserved0:3;
> > +	__u32 delta_edge_sense:13;
> > +	__u32 __reserved1:3;
> > +	__u32 corner_sense_0:13;
> > +	__u32 __reserved2:3;
> > +	__u32 delta_corner_sense:13;
> > +	__u32 __reserved3:3;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_yuvp1_y_ee_nr_gain_config - Luma(Y) edge
> enhancement
> > + *						noise reduction gain config
> > + *
> > + * @gain_pos_0: Gain for positive edge in dark area. u5.0, [0, 16], default
> 2.
> > + * @__reserved0: reserved
> > + * @delta_gain_posi: Difference in the gain of edges between the bright
> and
> > + *		     dark areas for positive edges. u5.0, [0, 16], default 0.
> > + * @__reserved1: reserved
> > + * @gain_neg_0: Gain for negative edge in dark area. u5.0, [0, 16], default
> 8.
> > + * @__reserved2: reserved
> > + * @delta_gain_neg: Difference in the gain of edges between the bright
> and
> > + *		    dark areas for negative edges. u5.0, [0, 16], default 0.
> > + * @__reserved3: reserved
> > + */
> > +struct ipu3_uapi_yuvp1_y_ee_nr_gain_config {
> > +	__u32 gain_pos_0:5;
> > +	__u32 __reserved0:3;
> > +	__u32 delta_gain_posi:5;
> > +	__u32 __reserved1:3;
> > +	__u32 gain_neg_0:5;
> > +	__u32 __reserved2:3;
> > +	__u32 delta_gain_neg:5;
> > +	__u32 __reserved3:3;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_yuvp1_y_ee_nr_clip_config - Luma(Y) edge
> enhancement
> > + *					noise reduction clipping config
> > + *
> > + * @clip_pos_0: Limit of positive edge in dark area
> > + *		u5, value [0, 16], default 8.
> > + * @__reserved0: reserved
> > + * @delta_clip_posi: Difference in the limit of edges between the bright
> > + *		     and dark areas for positive edges.
> > + *		     u5, value [0, 16], default 8.
> > + * @__reserved1: reserved
> > + * @clip_neg_0: Limit of negative edge in dark area
> > + *		u5, value [0, 16], default 8.
> > + * @__reserved2: reserved
> > + * @delta_clip_neg: Difference in the limit of edges between the bright
> > + *		    and dark areas for negative edges.
> > + *		    u5, value [0, 16], default 8.
> > + * @__reserved3: reserved
> > + */
> > +struct ipu3_uapi_yuvp1_y_ee_nr_clip_config {
> > +	__u32 clip_pos_0:5;
> > +	__u32 __reserved0:3;
> > +	__u32 delta_clip_posi:5;
> > +	__u32 __reserved1:3;
> > +	__u32 clip_neg_0:5;
> > +	__u32 __reserved2:3;
> > +	__u32 delta_clip_neg:5;
> > +	__u32 __reserved3:3;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_yuvp1_y_ee_nr_frng_config - Luma(Y) edge
> enhancement
> > + *						noise reduction fringe config
> > + *
> > + * @gain_exp: Common exponent of gains, u4, [0, 8], default 2.
> > + * @__reserved0: reserved
> > + * @min_edge: Threshold for edge and smooth stitching, u13.
> > + * @__reserved1: reserved
> > + * @lin_seg_param: Power of LinSeg, u4.
> > + * @__reserved2: reserved
> > + * @t1: Parameter for enabling/disabling the edge enhancement, u1.0, [0,
> 1],
> > + *	default 1.
> > + * @t2: Parameter for enabling/disabling the smoothing, u1.0, [0, 1],
> > + *	default 1.
> > + * @__reserved3: reserved
> > + */
> > +struct ipu3_uapi_yuvp1_y_ee_nr_frng_config {
> > +	__u32 gain_exp:4;
> > +	__u32 __reserved0:28;
> > +	__u32 min_edge:13;
> > +	__u32 __reserved1:3;
> > +	__u32 lin_seg_param:4;
> > +	__u32 __reserved2:4;
> > +	__u32 t1:1;
> > +	__u32 t2:1;
> > +	__u32 __reserved3:6;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_yuvp1_y_ee_nr_diag_config - Luma(Y) edge
> enhancement
> > + *					noise reduction diagonal config
> > + *
> > + * @diag_disc_g: Coefficient that prioritize diagonal edge direction on
> > + *		 horizontal or vertical for final enhancement.
> > + *		 u4.0, [1, 15], default 1.
> > + * @__reserved0: reserved
> > + * @hvw_hor: Weight of horizontal/vertical edge enhancement for hv
> edge.
> > + *		u2.2, [1, 15], default 4.
> > + * @dw_hor: Weight of diagonal edge enhancement for hv edge.
> > + *		u2.2, [1, 15], default 1.
> > + * @hvw_diag: Weight of horizontal/vertical edge enhancement for
> diagonal edge.
> > + *		u2.2, [1, 15], default 1.
> > + * @dw_diag: Weight of diagonal edge enhancement for diagonal edge.
> > + *		u2.2, [1, 15], default 4.
> > + * @__reserved1: reserved
> > + */
> > +struct ipu3_uapi_yuvp1_y_ee_nr_diag_config {
> > +	__u32 diag_disc_g:4;
> > +	__u32 __reserved0:4;
> > +	__u32 hvw_hor:4;
> > +	__u32 dw_hor:4;
> > +	__u32 hvw_diag:4;
> > +	__u32 dw_diag:4;
> > +	__u32 __reserved1:8;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_yuvp1_y_ee_nr_fc_coring_config - Luma(Y) edge
> enhancement
> > + *		noise reduction false color correction (FCC) coring config
> > + *
> > + * @pos_0: Gain for positive edge in dark, u13.0, [0, 16], default 0.
> > + * @__reserved0: reserved
> > + * @pos_delta: Gain for positive edge in bright, value: pos_0 + pos_delta
> <=16
> > + *		u13.0, default 0.
> > + * @__reserved1: reserved
> > + * @neg_0: Gain for negative edge in dark area, u13.0, range [0, 16],
> default 0.
> > + * @__reserved2: reserved
> > + * @neg_delta: Gain for negative edge in bright area. neg_0 + neg_delta
> <=16
> > + *		u13.0, default 0.
> > + * @__reserved3: reserved
> > + *
> > + * Coring is a simple soft thresholding technique.
> > + */
> > +struct ipu3_uapi_yuvp1_y_ee_nr_fc_coring_config {
> > +	__u32 pos_0:13;
> > +	__u32 __reserved0:3;
> > +	__u32 pos_delta:13;
> > +	__u32 __reserved1:3;
> > +	__u32 neg_0:13;
> > +	__u32 __reserved2:3;
> > +	__u32 neg_delta:13;
> > +	__u32 __reserved3:3;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_yuvp1_y_ee_nr_config - Edge enhancement and noise
> reduction
> > + *
> > + * @lpf: low-pass filter config. See &ipu3_uapi_yuvp1_y_ee_nr_lpf_config
> > + * @sense: sensitivity config. See
> &ipu3_uapi_yuvp1_y_ee_nr_sense_config
> > + * @gain: gain config as defined in
> &ipu3_uapi_yuvp1_y_ee_nr_gain_config
> > + * @clip: clip config as defined in &ipu3_uapi_yuvp1_y_ee_nr_clip_config
> > + * @frng: fringe config as defined in
> &ipu3_uapi_yuvp1_y_ee_nr_frng_config
> > + * @diag: diagonal edge config. See
> &ipu3_uapi_yuvp1_y_ee_nr_diag_config
> > + * @fc_coring: coring config for fringe control. See
> > + *	       &ipu3_uapi_yuvp1_y_ee_nr_fc_coring_config
> > + */
> > +struct ipu3_uapi_yuvp1_y_ee_nr_config {
> > +	struct ipu3_uapi_yuvp1_y_ee_nr_lpf_config lpf;
> > +	struct ipu3_uapi_yuvp1_y_ee_nr_sense_config sense;
> > +	struct ipu3_uapi_yuvp1_y_ee_nr_gain_config gain;
> > +	struct ipu3_uapi_yuvp1_y_ee_nr_clip_config clip;
> > +	struct ipu3_uapi_yuvp1_y_ee_nr_frng_config frng;
> > +	struct ipu3_uapi_yuvp1_y_ee_nr_diag_config diag;
> > +	struct ipu3_uapi_yuvp1_y_ee_nr_fc_coring_config fc_coring;
> > +} __packed;
> > +
> > +/* Total Color Correction */
> > +
> > +/**
> > + * struct ipu3_uapi_yuvp2_tcc_gen_control_static_config - Total color
> correction
> > + *				general control config
> > + *
> > + * @en:	0 - TCC disabled. Output = input 1 - TCC enabled.
> > + * @blend_shift:	blend shift, Range[3, 4], default NA.
> > + * @gain_according_to_y_only:	0: Gain is calculated according to YUV,
> > + *				1: Gain is calculated according to Y only
> > + * @__reserved0: reserved
> > + * @gamma:	Final blending coefficients. Values[-16, 16], default NA.
> > + * @__reserved1: reserved
> > + * @delta:	Final blending coefficients. Values[-16, 16], default NA.
> > + * @__reserved2: reserved
> > + */
> > +struct ipu3_uapi_yuvp2_tcc_gen_control_static_config {
> > +	__u32 en:1;
> > +	__u32 blend_shift:3;
> > +	__u32 gain_according_to_y_only:1;
> > +	__u32 __reserved0:11;
> > +	__s32 gamma:5;
> > +	__u32 __reserved1:3;
> > +	__s32 delta:5;
> > +	__u32 __reserved2:3;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_yuvp2_tcc_macc_elem_static_config - Total color
> correction
> > + *				multi-axis color control (MACC) config
> > + *
> > + * @a: a coefficient for 2x2 MACC conversion matrix.
> > + * @__reserved0: reserved
> > + * @b: b coefficient  2x2 MACC conversion matrix.
> > + * @__reserved1: reserved
> > + * @c: c coefficient for 2x2 MACC conversion matrix.
> > + * @__reserved2: reserved
> > + * @d: d coefficient for 2x2 MACC conversion matrix.
> > + * @__reserved3: reserved
> > + */
> > +struct ipu3_uapi_yuvp2_tcc_macc_elem_static_config {
> > +	__s32 a:12;
> > +	__u32 __reserved0:4;
> > +	__s32 b:12;
> > +	__u32 __reserved1:4;
> > +	__s32 c:12;
> > +	__u32 __reserved2:4;
> > +	__s32 d:12;
> > +	__u32 __reserved3:4;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_yuvp2_tcc_macc_table_static_config - Total color
> correction
> > + *				multi-axis color control (MACC) table array
> > + *
> > + * @entries: config for multi axis color correction, as specified by
> > + *	     &ipu3_uapi_yuvp2_tcc_macc_elem_static_config
> > + */
> > +struct ipu3_uapi_yuvp2_tcc_macc_table_static_config {
> > +	struct ipu3_uapi_yuvp2_tcc_macc_elem_static_config
> > +		entries[IPU3_UAPI_YUVP2_TCC_MACC_TABLE_ELEMENTS];
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_yuvp2_tcc_inv_y_lut_static_config - Total color
> correction
> > + *				inverse y lookup table
> > + *
> > + * @entries: lookup table for inverse y estimation, and use it to estimate
> the
> > + *	     ratio between luma and chroma. Chroma by approximate the
> absolute
> > + *	     value of the radius on the chroma plane (R = sqrt(u^2+v^2) ) and
> > + *	     luma by approximate by 1/Y.
> > + */
> > +struct ipu3_uapi_yuvp2_tcc_inv_y_lut_static_config {
> > +	__u16 entries[IPU3_UAPI_YUVP2_TCC_INV_Y_LUT_ELEMENTS];
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_yuvp2_tcc_gain_pcwl_lut_static_config - Total color
> > + *					correction lookup table for PCWL
> > + *
> > + * @entries: lookup table for gain piece wise linear transformation (PCWL)
> > + */
> > +struct ipu3_uapi_yuvp2_tcc_gain_pcwl_lut_static_config {
> > +	__u16 entries[IPU3_UAPI_YUVP2_TCC_GAIN_PCWL_LUT_ELEMENTS];
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_yuvp2_tcc_r_sqr_lut_static_config - Total color
> correction
> > + *				lookup table for r square root
> > + *
> > + * @entries: lookup table for r square root estimation
> > + */
> > +struct ipu3_uapi_yuvp2_tcc_r_sqr_lut_static_config {
> > +	__s16 entries[IPU3_UAPI_YUVP2_TCC_R_SQR_LUT_ELEMENTS];
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_yuvp2_tcc_static_config- Total color correction static
> > + *
> > + * @gen_control: general config for Total Color Correction
> > + * @macc_table: config for multi axis color correction
> > + * @inv_y_lut: lookup table for inverse y estimation
> > + * @gain_pcwl: lookup table for gain PCWL
> > + * @r_sqr_lut: lookup table for r square root estimation.
> > + */
> > +struct ipu3_uapi_yuvp2_tcc_static_config {
> > +	struct ipu3_uapi_yuvp2_tcc_gen_control_static_config gen_control;
> > +	struct ipu3_uapi_yuvp2_tcc_macc_table_static_config macc_table;
> > +	struct ipu3_uapi_yuvp2_tcc_inv_y_lut_static_config inv_y_lut;
> > +	struct ipu3_uapi_yuvp2_tcc_gain_pcwl_lut_static_config gain_pcwl;
> > +	struct ipu3_uapi_yuvp2_tcc_r_sqr_lut_static_config r_sqr_lut;
> > +} __packed;
> > +
> > +/* Advanced Noise Reduction related structs */
> > +
> > +/*
> > + * struct ipu3_uapi_anr_alpha - Advanced noise reduction alpha
> > + *
> > + * Tunable parameters that are subject to modification according to the
> > + * total gain used.
> > + */
> > +struct ipu3_uapi_anr_alpha {
> > +	__u16 gr;
> > +	__u16 r;
> > +	__u16 b;
> > +	__u16 gb;
> > +	__u16 dc_gr;
> > +	__u16 dc_r;
> > +	__u16 dc_b;
> > +	__u16 dc_gb;
> > +} __packed;
> > +
> > +/*
> > + * struct ipu3_uapi_anr_beta - Advanced noise reduction beta
> > + *
> > + * Tunable parameters that are subject to modification according to the
> > + * total gain used.
> > + */
> > +struct ipu3_uapi_anr_beta {
> > +	__u16 beta_gr;
> > +	__u16 beta_r;
> > +	__u16 beta_b;
> > +	__u16 beta_gb;
> > +} __packed;
> > +
> > +/*
> > + * struct ipu3_uapi_anr_plain_color - Advanced noise reduction plain
> color with
> > + *				      4x4 matrix
> > + *
> > + * Tunable parameters that are subject to modification according to the
> > + * total gain used.
> > + */
> > +struct ipu3_uapi_anr_plain_color {
> > +	__u16 reg_w_gr[16];
> > +	__u16 reg_w_r[16];
> > +	__u16 reg_w_b[16];
> > +	__u16 reg_w_gb[16];
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_anr_transform_config - Advanced noise reduction
> transform
> > + *
> > + * @enable: advanced noise reduction enabled.
> > + * @adaptive_treshhold_en: On IPU3, adaptive threshold is always
> enabled.
> > + * @__reserved1: reserved
> > + * @__reserved2: reserved
> > + * @alpha: using following defaults:
> > + *		13, 13, 13, 13, 0, 0, 0, 0
> > + *		11, 11, 11, 11, 0, 0, 0, 0
> > + *		14,  14, 14, 14, 0, 0, 0, 0
> > + * @beta: use following defaults:
> > + *		24, 24, 24, 24
> > + *		21, 20, 20, 21
> > + *		25, 25, 25, 25
> > + * @color: use defaults defined in driver/media/pci/intel/ipu3-tables.c
> > + * @sqrt_lut: 11 bits per element, values =
> > + *					[724 768 810 849 887
> > + *					923 958 991 1024 1056
> > + *					1116 1145 1173 1201 1086
> > + *					1228 1254 1280 1305 1330
> > + *					1355 1379 1402 1425 1448]
> > + * @xreset: Reset value of X for r^2 calculation Value: col_start-X_center
> > + *	Constraint: Xreset + FrameWdith=4095 Xreset= -4095, default -1632.
> > + * @__reserved3: reserved
> > + * @yreset: Reset value of Y for r^2 calculation Value: row_start-Y_center
> > + *	 Constraint: Yreset + FrameHeight=4095 Yreset= -4095, default -1224.
> > + * @__reserved4: reserved
> > + * @x_sqr_reset: Reset value of X^2 for r^2 calculation Value = (Xreset)^2
> > + * @r_normfactor: Normalization factor for R. Default 14.
> > + * @__reserved5: reserved
> > + * @y_sqr_reset: Reset value of Y^2 for r^2 calculation Value = (Yreset)^2
> > + * @gain_scale: Parameter describing shading gain as a function of
> distance
> > + *		from the image center.
> > + *		A single value per frame, loaded by the driver. Default 115.
> > + */
> > +struct ipu3_uapi_anr_transform_config {
> > +	__u32 enable:1;			/* 0 or 1, disabled or enabled
> */
> > +	__u32 adaptive_treshhold_en:1;	/* On IPU3, always enabled
> */
> > +
> > +	__u32 __reserved1:30;
> > +	__u8 __reserved2[44];
> > +
> > +	struct ipu3_uapi_anr_alpha alpha[3];
> > +	struct ipu3_uapi_anr_beta beta[3];
> > +	struct ipu3_uapi_anr_plain_color color[3];
> > +
> > +	__u16 sqrt_lut[IPU3_UAPI_ANR_LUT_SIZE];	/* 11 bits per element
> */
> > +
> > +	__s16 xreset:13;
> > +	__u16 __reserved3:3;
> > +	__s16 yreset:13;
> > +	__u16 __reserved4:3;
> > +
> > +	__u32 x_sqr_reset:24;
> > +	__u32 r_normfactor:5;
> > +	__u32 __reserved5:3;
> > +
> > +	__u32 y_sqr_reset:24;
> > +	__u32 gain_scale:8;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_anr_stitch_pyramid - ANR stitch pyramid
> > + *
> > + * @entry0: pyramid LUT entry0, range [0x0, 0x3f]
> > + * @entry1: pyramid LUT entry1, range [0x0, 0x3f]
> > + * @entry2: pyramid LUT entry2, range [0x0, 0x3f]
> > + * @__reserved: reserved
> > + */
> > +struct ipu3_uapi_anr_stitch_pyramid {
> > +	__u32 entry0:6;
> > +	__u32 entry1:6;
> > +	__u32 entry2:6;
> > +	__u32 __reserved:14;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_anr_stitch_config - ANR stitch config
> > + *
> > + * @anr_stitch_en: enable stitch. Enabled with 1.
> > + * @__reserved: reserved
> > + * @pyramid: pyramid table as defined by
> &ipu3_uapi_anr_stitch_pyramid
> > + *		default values:
> > + *		{ 1, 3, 5 }, { 7, 7, 5 }, { 3, 1, 3 },
> > + *		{ 9, 15, 21 }, { 21, 15, 9 }, { 3, 5, 15 },
> > + *		{ 25, 35, 35 }, { 25, 15, 5 }, { 7, 21, 35 },
> > + *		{ 49, 49, 35 }, { 21, 7, 7 }, { 21, 35, 49 },
> > + *		{ 49, 35, 21 }, { 7, 5, 15 }, { 25, 35, 35 },
> > + *		{ 25, 15, 5 }, { 3, 9, 15 }, { 21, 21, 15 },
> > + *		{ 9, 3, 1 }, { 3, 5, 7 }, { 7, 5, 3}, { 1 }
> > + */
> > +struct ipu3_uapi_anr_stitch_config {
> > +	__u32 anr_stitch_en;
> > +	__u8 __reserved[44];
> > +	struct ipu3_uapi_anr_stitch_pyramid
> pyramid[IPU3_UAPI_ANR_PYRAMID_SIZE];
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_anr_config - ANR config
> > + *
> > + * @transform:	advanced noise reduction transform config as
> specified by
> > + *		&ipu3_uapi_anr_transform_config
> > + * @stitch: create 4x4 patch from 4 surrounding 8x8 patches.
> > + */
> > +struct ipu3_uapi_anr_config {
> > +	struct ipu3_uapi_anr_transform_config transform
> __attribute__((aligned(32)));
> > +	struct ipu3_uapi_anr_stitch_config stitch __attribute__((aligned(32)));
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_acc_param - Accelerator cluster parameters
> > + *
> > + * ACC refers to the HW cluster containing all Fixed Functions(FFs). Each FF
> > + * implements a specific algorithm.
> > + *
> > + * @bnr:	parameters for bayer noise reduction static config. See
> > + *		&ipu3_uapi_bnr_static_config
> > + * @green_disparity:	disparity static config between gr and gb
> channel.
> > + *			See &ipu3_uapi_bnr_static_config_green_disparity
> > + * @dm:	de-mosaic config. See &ipu3_uapi_dm_config
> > + * @ccm:	color correction matrix. See &ipu3_uapi_ccm_mat_config
> > + * @gamma:	gamma correction config. See &ipu3_uapi_gamma_config
> > + * @csc:	color space conversion matrix. See
> &ipu3_uapi_csc_mat_config
> > + * @cds:	color down sample config. See &ipu3_uapi_cds_params
> > + * @shd:	lens shading correction config. See &ipu3_uapi_shd_config
> > + * @iefd:	Image enhancement filter and denoise config.
> > + *		&ipu3_uapi_yuvp1_iefd_config
> > + * @yds_c0:	y down scaler config. &ipu3_uapi_yuvp1_yds_config
> > + * @chnr_c0:	chroma noise reduction config.
> &ipu3_uapi_yuvp1_chnr_config
> > + * @y_ee_nr:	y edge enhancement and noise reduction config.
> > + *		&ipu3_uapi_yuvp1_y_ee_nr_config
> > + * @yds:	y down scaler config. See &ipu3_uapi_yuvp1_yds_config
> > + * @chnr:	chroma noise reduction config. See
> &ipu3_uapi_yuvp1_chnr_config
> > + * @__reserved1: reserved
> > + * @yds2:	y channel down scaler config. See
> &ipu3_uapi_yuvp1_yds_config
> > + * @tcc:	total color correction config as defined in struct
> > + *		&ipu3_uapi_yuvp2_tcc_static_config
> > + * @__reserved2: reserved
> > + * @anr:	advanced noise reduction config.See &ipu3_uapi_anr_config
> > + * @awb_fr:	AWB filter response config. See ipu3_uapi_awb_fr_config
> > + * @ae:	auto exposure config  As specified by &ipu3_uapi_ae_config
> > + * @af:	auto focus config. As specified by &ipu3_uapi_af_config
> > + * @awb:	auto white balance config. As specified by
> &ipu3_uapi_awb_config
> > + */
> > +struct ipu3_uapi_acc_param {
> > +	struct ipu3_uapi_bnr_static_config bnr;
> > +	struct ipu3_uapi_bnr_static_config_green_disparity
> > +				green_disparity __attribute__((aligned(32)));
> > +	struct ipu3_uapi_dm_config dm __attribute__((aligned(32)));
> > +	struct ipu3_uapi_ccm_mat_config ccm __attribute__((aligned(32)));
> > +	struct ipu3_uapi_gamma_config gamma __attribute__((aligned(32)));
> > +	struct ipu3_uapi_csc_mat_config csc __attribute__((aligned(32)));
> > +	struct ipu3_uapi_cds_params cds __attribute__((aligned(32)));
> > +	struct ipu3_uapi_shd_config shd __attribute__((aligned(32)));
> > +	struct ipu3_uapi_yuvp1_iefd_config iefd __attribute__((aligned(32)));
> > +	struct ipu3_uapi_yuvp1_yds_config yds_c0
> __attribute__((aligned(32)));
> > +	struct ipu3_uapi_yuvp1_chnr_config chnr_c0
> __attribute__((aligned(32)));
> > +	struct ipu3_uapi_yuvp1_y_ee_nr_config y_ee_nr
> __attribute__((aligned(32)));
> > +	struct ipu3_uapi_yuvp1_yds_config yds __attribute__((aligned(32)));
> > +	struct ipu3_uapi_yuvp1_chnr_config chnr
> __attribute__((aligned(32)));
> > +	struct ipu3_uapi_yuvp1_yds_config yds2 __attribute__((aligned(32)));
> > +	struct ipu3_uapi_yuvp2_tcc_static_config tcc
> __attribute__((aligned(32)));
> > +	struct ipu3_uapi_anr_config anr;
> > +	struct ipu3_uapi_awb_fr_config awb_fr;
> > +	struct ipu3_uapi_ae_config ae;
> > +	struct ipu3_uapi_af_config af;
> > +	struct ipu3_uapi_awb_config awb;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_isp_lin_vmem_params - Linearization parameters
> > + *
> > + * @lin_lutlow_gr: linearization look-up table for GR channel interpolation.
> > + * @lin_lutlow_r: linearization look-up table for R channel interpolation.
> > + * @lin_lutlow_b: linearization look-up table for B channel interpolation.
> > + * @lin_lutlow_gb: linearization look-up table for GB channel interpolation.
> > + *			lin_lutlow_gr / lin_lutlow_gr / lin_lutlow_gr /
> > + *			lin_lutlow_gr <= LIN_MAX_VALUE - 1.
> > + * @lin_lutdif_gr:	lin_lutlow_gr[i+1] - lin_lutlow_gr[i].
> > + * @lin_lutdif_r:	lin_lutlow_r[i+1] - lin_lutlow_r[i].
> > + * @lin_lutdif_b:	lin_lutlow_b[i+1] - lin_lutlow_b[i].
> > + * @lin_lutdif_gb:	lin_lutlow_gb[i+1] - lin_lutlow_gb[i].
> > + */
> > +struct ipu3_uapi_isp_lin_vmem_params {
> > +	__s16 lin_lutlow_gr[IPU3_UAPI_LIN_LUT_SIZE];
> > +	__s16 lin_lutlow_r[IPU3_UAPI_LIN_LUT_SIZE];
> > +	__s16 lin_lutlow_b[IPU3_UAPI_LIN_LUT_SIZE];
> > +	__s16 lin_lutlow_gb[IPU3_UAPI_LIN_LUT_SIZE];
> > +	__s16 lin_lutdif_gr[IPU3_UAPI_LIN_LUT_SIZE];
> > +	__s16 lin_lutdif_r[IPU3_UAPI_LIN_LUT_SIZE];
> > +	__s16 lin_lutdif_b[IPU3_UAPI_LIN_LUT_SIZE];
> > +	__s16 lin_lutdif_gb[IPU3_UAPI_LIN_LUT_SIZE];
> > +} __packed;
> > +
> > +/* Temporal Noise Reduction */
> > +
> > +/**
> > + * struct ipu3_uapi_isp_tnr3_vmem_params - Temporal noise reduction
> vector
> > + *					   memory parameters
> > + *
> > + * @slope: slope setting in interpolation curve for temporal noise
> reduction.
> > + * @__reserved1: reserved
> > + * @sigma: knee point setting in interpolation curve for temporal
> > + *	   noise reduction.
> > + * @__reserved2: reserved
> > + */
> > +struct ipu3_uapi_isp_tnr3_vmem_params {
> > +	__u16 slope[IPU3_UAPI_ISP_TNR3_VMEM_LEN];
> > +	__u16 __reserved1[IPU3_UAPI_ISP_VEC_ELEMS
> > +						-
> IPU3_UAPI_ISP_TNR3_VMEM_LEN];
> > +	__u16 sigma[IPU3_UAPI_ISP_TNR3_VMEM_LEN];
> > +	__u16 __reserved2[IPU3_UAPI_ISP_VEC_ELEMS
> > +						-
> IPU3_UAPI_ISP_TNR3_VMEM_LEN];
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_isp_tnr3_params - Temporal noise reduction v3
> parameters
> > + *
> > + * @knee_y1: Knee point TNR3 assumes standard deviation of Y,U and
> > + *	V at Y1 are TnrY1_Sigma_Y, U and V.
> > + * @knee_y2: Knee point TNR3 assumes standard deviation of Y,U and
> > + *		V at Y2 are TnrY2_Sigma_Y, U and V.
> > + * @maxfb_y: Max feedback gain for Y
> > + * @maxfb_u: Max feedback gain for U
> > + * @maxfb_v: Max feedback gain for V
> > + * @round_adj_y: rounding Adjust for Y
> > + * @round_adj_u: rounding Adjust for U
> > + * @round_adj_v: rounding Adjust for V
> > + * @ref_buf_select: selection of the reference frame buffer to be used.
> > + */
> > +struct ipu3_uapi_isp_tnr3_params {
> > +	__u32 knee_y1;
> > +	__u32 knee_y2;
> > +	__u32 maxfb_y;
> > +	__u32 maxfb_u;
> > +	__u32 maxfb_v;
> > +	__u32 round_adj_y;
> > +	__u32 round_adj_u;
> > +	__u32 round_adj_v;
> > +	__u32 ref_buf_select;
> > +} __packed;
> > +
> > +/* Extreme Noise Reduction version 3 */
> > +
> > +/**
> > + * struct ipu3_uapi_isp_xnr3_vmem_params - Extreme noise reduction v3
> > + *					   vector memory parameters
> > + *
> > + * @x: xnr3 parameters.
> > + * @a: xnr3 parameters.
> > + * @b: xnr3 parameters.
> > + * @c: xnr3 parameters.
> > + */
> > +struct ipu3_uapi_isp_xnr3_vmem_params {
> > +	__u16 x[IPU3_UAPI_ISP_VEC_ELEMS];
> > +	__u16 a[IPU3_UAPI_ISP_VEC_ELEMS];
> > +	__u16 b[IPU3_UAPI_ISP_VEC_ELEMS];
> > +	__u16 c[IPU3_UAPI_ISP_VEC_ELEMS];
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_xnr3_alpha_params - Extreme noise reduction v3
> > + *					alpha tuning parameters
> > + *
> > + * @y0: Sigma for Y range similarity in dark area.
> > + * @u0: Sigma for U range similarity in dark area.
> > + * @v0: Sigma for V range similarity in dark area.
> > + * @ydiff: Sigma difference for Y between bright area and dark area.
> > + * @udiff: Sigma difference for U between bright area and dark area.
> > + * @vdiff: Sigma difference for V between bright area and dark area.
> > + */
> > +struct ipu3_uapi_xnr3_alpha_params {
> > +	__u32 y0;
> > +	__u32 u0;
> > +	__u32 v0;
> > +	__u32 ydiff;
> > +	__u32 udiff;
> > +	__u32 vdiff;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_xnr3_coring_params - Extreme noise reduction v3
> > + *					 coring parameters
> > + *
> > + * @u0: Coring Threshold of U channel in dark area.
> > + * @v0: Coring Threshold of V channel in dark area.
> > + * @udiff: Threshold difference of U channel between bright and dark
> area.
> > + * @vdiff: Threshold difference of V channel between bright and dark area.
> > + */
> > +struct ipu3_uapi_xnr3_coring_params {
> > +	__u32 u0;
> > +	__u32 v0;
> > +	__u32 udiff;
> > +	__u32 vdiff;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_xnr3_blending_params - Blending factor
> > + *
> > + * @strength: The factor for blending output with input. This is tuning
> > + *	      parameterHigher values lead to more aggressive XNR operation.
> > + */
> > +struct ipu3_uapi_xnr3_blending_params {
> > +	__u32 strength;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_isp_xnr3_params - Extreme noise reduction v3
> parameters
> > + *
> > + * @alpha: parameters for xnr3 alpha. See
> &ipu3_uapi_xnr3_alpha_params
> > + * @coring: parameters for xnr3 coring. See
> &ipu3_uapi_xnr3_coring_params
> > + * @blending: parameters for xnr3 blending. See
> &ipu3_uapi_xnr3_blending_params
> > + */
> > +struct ipu3_uapi_isp_xnr3_params {
> > +	struct ipu3_uapi_xnr3_alpha_params alpha;
> > +	struct ipu3_uapi_xnr3_coring_params coring;
> > +	struct ipu3_uapi_xnr3_blending_params blending;
> > +} __packed;
> > +
> > +/***** Obgrid (optical black level compensation) table entry *****/
> > +
> > +/**
> > + * struct ipu3_uapi_obgrid_param - Optical black level compensation
> parameters
> > + *
> > + * @gr: Grid table values for color GR
> > + * @r: Grid table values for color R
> > + * @b: Grid table values for color B
> > + * @gb: Grid table values for color GB
> > + *
> > + * Black level is different for red, green, and blue channels. So black level
> > + * compensation is different per channel.
> > + */
> > +struct ipu3_uapi_obgrid_param {
> > +	__u16 gr;
> > +	__u16 r;
> > +	__u16 b;
> > +	__u16 gb;
> > +} __packed;
> > +
> > +/******************* V4L2_META_FMT_IPU3_PARAMS
> *******************/
> > +
> > +/**
> > + * struct ipu3_uapi_flags - bits to indicate which pipeline needs update
> > + *
> > + * @gdc: 0 = no update, 1 = update.
> > + * @obgrid: 0 = no update, 1 = update.
> > + * @__reserved1: Not used.
> > + * @acc_bnr: 0 = no update, 1 = update.
> > + * @acc_green_disparity: 0 = no update, 1 = update.
> > + * @acc_dm: 0 = no update, 1 = update.
> > + * @acc_ccm: 0 = no update, 1 = update.
> > + * @acc_gamma: 0 = no update, 1 = update.
> > + * @acc_csc: 0 = no update, 1 = update.
> > + * @acc_cds: 0 = no update, 1 = update.
> > + * @acc_shd: 0 = no update, 1 = update.
> > + * @__reserved2: Not used.
> > + * @acc_iefd: 0 = no update, 1 = update.
> > + * @acc_yds_c0: 0 = no update, 1 = update.
> > + * @acc_chnr_c0: 0 = no update, 1 = update.
> > + * @acc_y_ee_nr: 0 = no update, 1 = update.
> > + * @acc_yds: 0 = no update, 1 = update.
> > + * @acc_chnr: 0 = no update, 1 = update.
> > + * @acc_ytm: 0 = no update, 1 = update.
> > + * @acc_yds2: 0 = no update, 1 = update.
> > + * @acc_tcc: 0 = no update, 1 = update.
> > + * @acc_dpc: 0 = no update, 1 = update.
> > + * @acc_bds: 0 = no update, 1 = update.
> > + * @acc_anr: 0 = no update, 1 = update.
> > + * @acc_awb_fr: 0 = no update, 1 = update.
> > + * @acc_ae: 0 = no update, 1 = update.
> > + * @acc_af: 0 = no update, 1 = update.
> > + * @acc_awb: 0 = no update, 1 = update.
> > + * @__acc_osys: 0 = no update, 1 = update.
> > + * @__reserved3: Not used.
> > + * @lin_vmem_params: 0 = no update, 1 = update.
> > + * @tnr3_vmem_params: 0 = no update, 1 = update.
> > + * @xnr3_vmem_params: 0 = no update, 1 = update.
> > + * @tnr3_dmem_params: 0 = no update, 1 = update.
> > + * @xnr3_dmem_params: 0 = no update, 1 = update.
> > + * @__reserved4: Not used.
> > + * @obgrid_param: 0 = no update, 1 = update.
> > + * @__reserved5: Not used.
> > + */
> > +struct ipu3_uapi_flags {
> > +	__u32 gdc:1;
> > +	__u32 obgrid:1;
> > +	__u32 __reserved1:30;
> > +
> > +	__u32 acc_bnr:1;
> > +	__u32 acc_green_disparity:1;
> > +	__u32 acc_dm:1;
> > +	__u32 acc_ccm:1;
> > +	__u32 acc_gamma:1;
> > +	__u32 acc_csc:1;
> > +	__u32 acc_cds:1;
> > +	__u32 acc_shd:1;
> > +	__u32 __reserved2:2;
> > +	__u32 acc_iefd:1;
> > +	__u32 acc_yds_c0:1;
> > +	__u32 acc_chnr_c0:1;
> > +	__u32 acc_y_ee_nr:1;
> > +	__u32 acc_yds:1;
> > +	__u32 acc_chnr:1;
> > +	__u32 acc_ytm:1;
> > +	__u32 acc_yds2:1;
> > +	__u32 acc_tcc:1;
> > +	__u32 acc_dpc:1;
> > +	__u32 acc_bds:1;
> > +	__u32 acc_anr:1;
> > +	__u32 acc_awb_fr:1;
> > +	__u32 acc_ae:1;
> > +	__u32 acc_af:1;
> > +	__u32 acc_awb:1;
> > +	__u32 __reserved3:4;
> > +
> > +	__u32 lin_vmem_params:1;
> > +	__u32 tnr3_vmem_params:1;
> > +	__u32 xnr3_vmem_params:1;
> > +	__u32 tnr3_dmem_params:1;
> > +	__u32 xnr3_dmem_params:1;
> > +	__u32 __reserved4:1;
> > +	__u32 obgrid_param:1;
> > +	__u32 __reserved5:25;
> > +} __packed;
> > +
> > +/**
> > + * struct ipu3_uapi_params - V4L2_META_FMT_IPU3_PARAMS
> > + *
> > + * @use:	select which parameters to apply, see &ipu3_uapi_flags
> > + * @acc_param:	ACC parameters, as specified by
> &ipu3_uapi_acc_param
> > + * @lin_vmem_params:	linearization VMEM, as specified by
> > + *			&ipu3_uapi_isp_lin_vmem_params
> > + * @tnr3_vmem_params:	tnr3 VMEM as specified by
> > + *			&ipu3_uapi_isp_tnr3_vmem_params
> > + * @xnr3_vmem_params:	xnr3 VMEM as specified by
> > + *			&ipu3_uapi_isp_xnr3_vmem_params
> > + * @tnr3_dmem_params:	tnr3 DMEM as specified by
> &ipu3_uapi_isp_tnr3_params
> > + * @xnr3_dmem_params:	xnr3 DMEM as specified by
> &ipu3_uapi_isp_xnr3_params
> > + * @obgrid_param:	obgrid parameters as specified by
> > + *			&ipu3_uapi_obgrid_param
> > + *
> > + * The video queue "parameters" is of format
> V4L2_META_FMT_IPU3_PARAMS.
> > + * This is a "single plane" v4l2_meta_format using
> V4L2_BUF_TYPE_META_OUTPUT.
> > + *
> > + * struct ipu3_uapi_params as defined below contains a lot of parameters
> and
> > + * ipu3_uapi_flags selects which parameters to apply.
> > + */
> > +struct ipu3_uapi_params {
> > +	/* Flags which of the settings below are to be applied */
> > +	struct ipu3_uapi_flags use __attribute__((aligned(32)));
> > +
> > +	/* Accelerator cluster parameters */
> > +	struct ipu3_uapi_acc_param acc_param;
> > +
> > +	/* ISP vector address space parameters */
> > +	struct ipu3_uapi_isp_lin_vmem_params lin_vmem_params;
> > +	struct ipu3_uapi_isp_tnr3_vmem_params tnr3_vmem_params;
> > +	struct ipu3_uapi_isp_xnr3_vmem_params xnr3_vmem_params;
> > +
> > +	/* ISP data memory (DMEM) parameters */
> > +	struct ipu3_uapi_isp_tnr3_params tnr3_dmem_params;
> > +	struct ipu3_uapi_isp_xnr3_params xnr3_dmem_params;
> > +
> > +	/* Optical black level compensation */
> > +	struct ipu3_uapi_obgrid_param obgrid_param;
> > +} __packed;
> > +#endif
> 
> 
> 
> Thanks,
> Mauro