From: Enric Balletbo i Serra <enric.balletbo@collabora.com>
To: linux-kernel@vger.kernel.org
Cc: drinkcat@chromium.org, weiyi.lu@mediatek.com,
fparent@baylibre.com, Matthias Brugger <mbrugger@suse.com>,
linux-mediatek@lists.infradead.org, hsinyi@chromium.org,
matthias.bgg@gmail.com,
Collabora Kernel ML <kernel@collabora.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 06/12] soc: mediatek: pm-domains: Add SMI block as bus protection block
Date: Thu, 10 Sep 2020 19:28:20 +0200 [thread overview]
Message-ID: <20200910172826.3074357-7-enric.balletbo@collabora.com> (raw)
In-Reply-To: <20200910172826.3074357-1-enric.balletbo@collabora.com>
From: Matthias Brugger <mbrugger@suse.com>
Apart from the infracfg block, the SMI block is used to enable the bus
protection for some power domains. Add support for this block.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---
drivers/soc/mediatek/mtk-pm-domains.c | 64 ++++++++++++++++++++-------
include/linux/soc/mediatek/infracfg.h | 6 +++
2 files changed, 53 insertions(+), 17 deletions(-)
diff --git a/drivers/soc/mediatek/mtk-pm-domains.c b/drivers/soc/mediatek/mtk-pm-domains.c
index f609c2d454fa..3aa430a60602 100644
--- a/drivers/soc/mediatek/mtk-pm-domains.c
+++ b/drivers/soc/mediatek/mtk-pm-domains.c
@@ -56,8 +56,25 @@
#define SPM_MAX_BUS_PROT_DATA 3
+#define _BUS_PROT(_mask, _set, _clr, _sta, _update) { \
+ .bus_prot_mask = (_mask), \
+ .bus_prot_set = _set, \
+ .bus_prot_clr = _clr, \
+ .bus_prot_sta = _sta, \
+ .bus_prot_reg_update = _update, \
+ }
+
+#define BUS_PROT_WR(_mask, _set, _clr, _sta) \
+ _BUS_PROT(_mask, _set, _clr, _sta, false)
+
+#define BUS_PROT_UPDATE(_mask, _set, _clr, _sta) \
+ _BUS_PROT(_mask, _set, _clr, _sta, true)
+
struct scpsys_bus_prot_data {
u32 bus_prot_mask;
+ u32 bus_prot_set;
+ u32 bus_prot_clr;
+ u32 bus_prot_sta;
bool bus_prot_reg_update;
};
@@ -69,6 +86,7 @@ struct scpsys_bus_prot_data {
* @sram_pdn_ack_bits: The mask for sram power control acked bits.
* @caps: The flag for active wake-up action.
* @bp_infracfg: bus protection for infracfg subsystem
+ * @bp_smi: bus protection for smi subsystem
*/
struct scpsys_domain_data {
u32 sta_mask;
@@ -77,6 +95,7 @@ struct scpsys_domain_data {
u32 sram_pdn_ack_bits;
u8 caps;
const struct scpsys_bus_prot_data bp_infracfg[SPM_MAX_BUS_PROT_DATA];
+ const struct scpsys_bus_prot_data bp_smi[SPM_MAX_BUS_PROT_DATA];
};
struct scpsys_domain {
@@ -86,6 +105,7 @@ struct scpsys_domain {
int num_clks;
struct clk_bulk_data *clks;
struct regmap *infracfg;
+ struct regmap *smi;
};
struct scpsys_soc_data {
@@ -173,9 +193,9 @@ static int _scpsys_bus_protect_enable(const struct scpsys_bus_prot_data *bpd, st
if (bpd[i].bus_prot_reg_update)
regmap_update_bits(regmap, INFRA_TOPAXI_PROTECTEN, mask, mask);
else
- regmap_write(regmap, INFRA_TOPAXI_PROTECTEN_SET, mask);
+ regmap_write(regmap, bpd[i].bus_prot_set, mask);
- ret = regmap_read_poll_timeout(regmap, INFRA_TOPAXI_PROTECTSTA1,
+ ret = regmap_read_poll_timeout(regmap, bpd[i].bus_prot_sta,
val, (val & mask) == mask,
MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
if (ret)
@@ -191,7 +211,11 @@ static int scpsys_bus_protect_enable(struct scpsys_domain *pd)
int ret;
ret = _scpsys_bus_protect_enable(bpd, pd->infracfg);
- return ret;
+ if (ret)
+ return ret;
+
+ bpd = pd->data->bp_smi;
+ return _scpsys_bus_protect_enable(bpd, pd->smi);
}
static int _scpsys_bus_protect_disable(const struct scpsys_bus_prot_data *bpd,
@@ -206,11 +230,11 @@ static int _scpsys_bus_protect_disable(const struct scpsys_bus_prot_data *bpd,
return 0;
if (bpd[i].bus_prot_reg_update)
- regmap_update_bits(regmap, INFRA_TOPAXI_PROTECTEN, mask, 0);
+ regmap_update_bits(regmap, bpd[i].bus_prot_set, mask, 0);
else
- regmap_write(regmap, INFRA_TOPAXI_PROTECTEN_CLR, mask);
+ regmap_write(regmap, bpd[i].bus_prot_clr, mask);
- ret = regmap_read_poll_timeout(regmap, INFRA_TOPAXI_PROTECTSTA1,
+ ret = regmap_read_poll_timeout(regmap, bpd[i].bus_prot_sta,
val, !(val & mask),
MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
if (ret)
@@ -226,7 +250,11 @@ static int scpsys_bus_protect_disable(struct scpsys_domain *pd)
int ret;
ret = _scpsys_bus_protect_disable(bpd, pd->infracfg);
- return ret;
+ if (ret)
+ return ret;
+
+ bpd = pd->data->bp_smi;
+ return _scpsys_bus_protect_disable(bpd, pd->smi);
}
static int scpsys_power_on(struct generic_pm_domain *genpd)
@@ -360,6 +388,10 @@ static int scpsys_add_one_domain(struct scpsys *scpsys, struct device_node *node
if (IS_ERR(pd->infracfg))
pd->infracfg = NULL;
+ pd->smi = syscon_regmap_lookup_by_phandle(node, "mediatek,smi");
+ if (IS_ERR(pd->smi))
+ pd->smi = NULL;
+
pd->num_clks = of_clk_get_parent_count(node);
if (pd->num_clks > 0) {
pd->clks = devm_kcalloc(scpsys->dev, pd->num_clks, sizeof(*pd->clks), GFP_KERNEL);
@@ -532,10 +564,9 @@ static const struct scpsys_domain_data scpsys_domain_data_mt8173[] = {
.ctl_offs = SPM_DIS_PWR_CON,
.sram_pdn_bits = GENMASK(11, 8),
.sram_pdn_ack_bits = GENMASK(12, 12),
- .bp_infracfg[0] = {
- .bus_prot_reg_update = true,
- .bus_prot_mask = MT8173_TOP_AXI_PROT_EN_MM_M0 |
- MT8173_TOP_AXI_PROT_EN_MM_M1,
+ .bp_infracfg = {
+ BUS_PROT_UPDATE_MT8173(MT8173_TOP_AXI_PROT_EN_MM_M0 |
+ MT8173_TOP_AXI_PROT_EN_MM_M1),
},
},
[MT8173_POWER_DOMAIN_VENC_LT] = {
@@ -574,12 +605,11 @@ static const struct scpsys_domain_data scpsys_domain_data_mt8173[] = {
.ctl_offs = SPM_MFG_PWR_CON,
.sram_pdn_bits = GENMASK(13, 8),
.sram_pdn_ack_bits = GENMASK(21, 16),
- .bp_infracfg[0] = {
- .bus_prot_reg_update = true,
- .bus_prot_mask = MT8173_TOP_AXI_PROT_EN_MFG_S |
- MT8173_TOP_AXI_PROT_EN_MFG_M0 |
- MT8173_TOP_AXI_PROT_EN_MFG_M1 |
- MT8173_TOP_AXI_PROT_EN_MFG_SNOOP_OUT,
+ .bp_infracfg = {
+ BUS_PROT_UPDATE_MT8173(MT8173_TOP_AXI_PROT_EN_MFG_S |
+ MT8173_TOP_AXI_PROT_EN_MFG_M0 |
+ MT8173_TOP_AXI_PROT_EN_MFG_M1 |
+ MT8173_TOP_AXI_PROT_EN_MFG_SNOOP_OUT),
},
},
};
diff --git a/include/linux/soc/mediatek/infracfg.h b/include/linux/soc/mediatek/infracfg.h
index f967d02cc2ff..3f18cddffb44 100644
--- a/include/linux/soc/mediatek/infracfg.h
+++ b/include/linux/soc/mediatek/infracfg.h
@@ -37,6 +37,12 @@
#define INFRA_TOPAXI_PROTECTEN_SET 0x0260
#define INFRA_TOPAXI_PROTECTEN_CLR 0x0264
+#define BUS_PROT_UPDATE_MT8173(_mask) \
+ BUS_PROT_UPDATE(_mask, \
+ INFRA_TOPAXI_PROTECTEN, \
+ INFRA_TOPAXI_PROTECTEN_CLR, \
+ INFRA_TOPAXI_PROTECTSTA1)
+
int mtk_infracfg_set_bus_protection(struct regmap *infracfg, u32 mask,
bool reg_update);
int mtk_infracfg_clear_bus_protection(struct regmap *infracfg, u32 mask,
--
2.28.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
next prev parent reply other threads:[~2020-09-10 17:30 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-10 17:28 [PATCH 00/12] soc: mediatek: pm-domains: Add new driver for SCPSYS power domains controller Enric Balletbo i Serra
2020-09-10 17:28 ` [PATCH 01/12] dt-bindings: power: Add bindings for the Mediatek " Enric Balletbo i Serra
2020-09-11 23:02 ` Rob Herring
2020-09-14 8:59 ` Matthias Brugger
2020-09-14 9:49 ` Enric Balletbo i Serra
2020-09-22 22:36 ` Rob Herring
2020-09-23 16:12 ` Enric Balletbo i Serra
2020-09-10 17:28 ` [PATCH 02/12] soc: mediatek: Add MediaTek SCPSYS power domains Enric Balletbo i Serra
2020-09-25 10:25 ` Weiyi Lu
2020-09-25 10:43 ` Matthias Brugger
2020-09-10 17:28 ` [PATCH 03/12] arm64: dts: mediatek: Add mt8173 power domain controller Enric Balletbo i Serra
2020-09-18 20:20 ` Fabien Parent
2020-09-18 20:50 ` Enric Balletbo Serra
2020-09-10 17:28 ` [PATCH 04/12] soc: mediatek: pm-domains: Add bus protection protocol Enric Balletbo i Serra
2020-09-10 17:28 ` [PATCH 05/12] soc: mediatek: pm_domains: Make bus protection generic Enric Balletbo i Serra
2020-09-10 17:28 ` Enric Balletbo i Serra [this message]
2020-09-25 10:45 ` [PATCH 06/12] soc: mediatek: pm-domains: Add SMI block as bus protection block Weiyi Lu
2020-09-25 11:01 ` Matthias Brugger
2020-09-10 17:28 ` [PATCH 07/12] soc: mediatek: pm-domains: Add extra sram control Enric Balletbo i Serra
2020-09-10 18:27 ` Matthias Brugger
2020-10-26 15:16 ` Enric Balletbo i Serra
2020-09-10 17:28 ` [PATCH 08/12] soc: mediatek: pm-domains: Add subsystem clocks Enric Balletbo i Serra
2020-09-25 10:55 ` Weiyi Lu
2020-09-25 12:20 ` Matthias Brugger
2020-09-10 17:28 ` [PATCH 09/12] soc: mediatek: pm-domains: Allow bus protection to ignore clear ack Enric Balletbo i Serra
2020-09-10 17:28 ` [PATCH 10/12] dt-bindings: power: Add MT8183 power domains Enric Balletbo i Serra
2020-09-10 17:28 ` [PATCH 11/12] soc: mediatek: pm-domains: Add support for mt8183 Enric Balletbo i Serra
2020-09-16 9:46 ` Matthias Brugger
2020-09-16 12:19 ` Matthias Brugger
2020-09-25 7:37 ` Hsin-Yi Wang
2020-09-25 8:21 ` Enric Balletbo i Serra
2020-09-25 9:07 ` Matthias Brugger
2020-09-10 17:28 ` [PATCH 12/12] arm64: dts: mediatek: Add mt8183 power domains controller Enric Balletbo i Serra
2020-09-25 10:06 ` [PATCH 00/12] soc: mediatek: pm-domains: Add new driver for SCPSYS " Weiyi Lu
2020-09-25 14:04 ` Matthias Brugger
2020-10-06 6:53 ` Weiyi Lu
2020-10-09 12:50 ` Matthias Brugger
2020-10-09 13:57 ` Enric Balletbo i Serra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200910172826.3074357-7-enric.balletbo@collabora.com \
--to=enric.balletbo@collabora.com \
--cc=drinkcat@chromium.org \
--cc=fparent@baylibre.com \
--cc=hsinyi@chromium.org \
--cc=kernel@collabora.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=mbrugger@suse.com \
--cc=weiyi.lu@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).