[PATCH 1/2] Bluetooth: btusb: Support public address configuration for MediaTek Chip.

linux-mediatek.lists.infradead.org archive mirror
 help / color / mirror / Atom feed

* [PATCH 1/2] Bluetooth: btusb: Support public address configuration for MediaTek Chip.
@ 2021-08-24 15:44 mark-yw.chen
  2021-08-24 15:44 ` [PATCH 2/2] Bluetooth: btusb: Add protocol for MediaTek bluetooth devices(MT7922) mark-yw.chen
  2021-08-30 15:03 ` [PATCH 1/2] Bluetooth: btusb: Support public address configuration for MediaTek Chip Marcel Holtmann
  0 siblings, 2 replies; 5+ messages in thread
From: mark-yw.chen @ 2021-08-24 15:44 UTC (permalink / raw)
  To: marcel, johan.hedberg
  Cc: sean.wang, linux-bluetooth, linux-mediatek, linux-kernel,
	michaelfsun, mcchou, mark-yw.chen

From: "mark-yw.chen" <mark-yw.chen@mediatek.com>

The MediaTek chip support vendor specific HCI command(0xfc1a) to
change the public address. Add hdev->set_bdaddr handler for MediaTek
Chip.

Signed-off-by: mark-yw.chen <mark-yw.chen@mediatek.com>
---
 drivers/bluetooth/btusb.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 60d2fce59a71..41e7c9f28d82 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2200,6 +2200,23 @@ struct btmtk_section_map {
 	};
 } __packed;
 
+static int btusb_set_bdaddr_mtk(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+	struct sk_buff *skb;
+	long ret;
+
+	skb = __hci_cmd_sync(hdev, 0xfc1a, sizeof(bdaddr), bdaddr, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		ret = PTR_ERR(skb);
+		bt_dev_err(hdev, "changing Mediatek device address failed (%ld)",
+			   ret);
+		return ret;
+	}
+	kfree_skb(skb);
+
+	return 0;
+}
+
 static void btusb_mtk_wmt_recv(struct urb *urb)
 {
 	struct hci_dev *hdev = urb->context;
@@ -3819,6 +3836,7 @@ static int btusb_probe(struct usb_interface *intf,
 		hdev->shutdown = btusb_mtk_shutdown;
 		hdev->manufacturer = 70;
 		hdev->cmd_timeout = btusb_mtk_cmd_timeout;
+		hdev->set_bdaddr = btusb_set_bdaddr_mtk;
 		set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
 		data->recv_acl = btusb_recv_acl_mtk;
 	}
-- 
2.18.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply related	[flat|nested] 5+ messages in thread

* [PATCH 2/2] Bluetooth: btusb: Add protocol for MediaTek bluetooth devices(MT7922)
  2021-08-24 15:44 [PATCH 1/2] Bluetooth: btusb: Support public address configuration for MediaTek Chip mark-yw.chen
@ 2021-08-24 15:44 ` mark-yw.chen
  2021-08-30 15:04   ` Marcel Holtmann
  2021-08-30 15:03 ` [PATCH 1/2] Bluetooth: btusb: Support public address configuration for MediaTek Chip Marcel Holtmann
  1 sibling, 1 reply; 5+ messages in thread
From: mark-yw.chen @ 2021-08-24 15:44 UTC (permalink / raw)
  To: marcel, johan.hedberg
  Cc: sean.wang, linux-bluetooth, linux-mediatek, linux-kernel,
	michaelfsun, mcchou, mark-yw.chen

From: "mark-yw.chen" <mark-yw.chen@mediatek.com>

The information in /sys/kernel/debug/usb/devices about the MT7922U
Bluetooth device is listed as the below.

T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 18 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0e8d ProdID=7922 Rev= 1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us

Signed-off-by: mark-yw.chen <mark-yw.chen@mediatek.com>
---
 drivers/bluetooth/btusb.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 41e7c9f28d82..fe52f7b9548e 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2821,6 +2821,8 @@ static int btusb_mtk_setup(struct hci_dev *hdev)
 	case 0x7668:
 		fwname = FIRMWARE_MT7668;
 		break;
+	case 0x7922:
+		fallthrough;
 	case 0x7961:
 		snprintf(fw_bin_name, sizeof(fw_bin_name),
 			"mediatek/BT_RAM_CODE_MT%04x_1_%x_hdr.bin",
-- 
2.18.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply related	[flat|nested] 5+ messages in thread

* Re: [PATCH 2/2] Bluetooth: btusb: Add protocol for MediaTek bluetooth devices(MT7922)
  2021-08-24 15:44 ` [PATCH 2/2] Bluetooth: btusb: Add protocol for MediaTek bluetooth devices(MT7922) mark-yw.chen
@ 2021-08-30 15:04   ` Marcel Holtmann
  0 siblings, 0 replies; 5+ messages in thread
From: Marcel Holtmann @ 2021-08-30 15:04 UTC (permalink / raw)
  To: "Mark-YW Chen (陳揚文)"
  Cc: Johan Hedberg, sean.wang, linux-bluetooth, linux-mediatek,
	linux-kernel, michaelfsun, mcchou

Hi Mark,

> The information in /sys/kernel/debug/usb/devices about the MT7922U
> Bluetooth device is listed as the below.
> 
> T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 18 Spd=480 MxCh= 0
> D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=0e8d ProdID=7922 Rev= 1.00
> S: Manufacturer=MediaTek Inc.
> S: Product=Wireless_Device
> S: SerialNumber=000000000
> C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
> A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
> E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
> I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
> E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
> E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
> I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
> E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
> E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
> 
> Signed-off-by: mark-yw.chen <mark-yw.chen@mediatek.com>
> ---
> drivers/bluetooth/btusb.c | 2 ++
> 1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index 41e7c9f28d82..fe52f7b9548e 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -2821,6 +2821,8 @@ static int btusb_mtk_setup(struct hci_dev *hdev)
> 	case 0x7668:
> 		fwname = FIRMWARE_MT7668;
> 		break;
> +	case 0x7922:
> +		fallthrough;

The fallthrough is not needed. Multiple case labels in a row are fine.

Regards

Marcel


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH 1/2] Bluetooth: btusb: Support public address configuration for MediaTek Chip.
  2021-08-24 15:44 [PATCH 1/2] Bluetooth: btusb: Support public address configuration for MediaTek Chip mark-yw.chen
  2021-08-24 15:44 ` [PATCH 2/2] Bluetooth: btusb: Add protocol for MediaTek bluetooth devices(MT7922) mark-yw.chen
@ 2021-08-30 15:03 ` Marcel Holtmann
       [not found]   ` <SL2PR03MB4457513693916CBA07BE450BB3CC9@SL2PR03MB4457.apcprd03.prod.outlook.com>
  1 sibling, 1 reply; 5+ messages in thread
From: Marcel Holtmann @ 2021-08-30 15:03 UTC (permalink / raw)
  To: "Mark-YW Chen (陳揚文)"
  Cc: Johan Hedberg, sean.wang, linux-bluetooth, linux-mediatek,
	linux-kernel, michaelfsun, mcchou

Hi Mark,

> The MediaTek chip support vendor specific HCI command(0xfc1a) to
> change the public address. Add hdev->set_bdaddr handler for MediaTek
> Chip.
> 
> Signed-off-by: mark-yw.chen <mark-yw.chen@mediatek.com>
> ---
> drivers/bluetooth/btusb.c | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
> 
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index 60d2fce59a71..41e7c9f28d82 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -2200,6 +2200,23 @@ struct btmtk_section_map {
> 	};
> } __packed;
> 
> +static int btusb_set_bdaddr_mtk(struct hci_dev *hdev, const bdaddr_t *bdaddr)
> +{
> +	struct sk_buff *skb;
> +	long ret;
> +
> +	skb = __hci_cmd_sync(hdev, 0xfc1a, sizeof(bdaddr), bdaddr, HCI_INIT_TIMEOUT);
> +	if (IS_ERR(skb)) {
> +		ret = PTR_ERR(skb);
> +		bt_dev_err(hdev, "changing Mediatek device address failed (%ld)",
> +			   ret);
> +		return ret;
> +	}
> +	kfree_skb(skb);
> +
> +	return 0;
> +}
> +

this is not a permanent change, correct? Meaning a power cycle will bring back the original BD_ADDR?

Regards

Marcel


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 5+ messages in thread

[parent not found: <SL2PR03MB4457513693916CBA07BE450BB3CC9@SL2PR03MB4457.apcprd03.prod.outlook.com>]

* Re: [PATCH 1/2] Bluetooth: btusb: Support public address configuration for MediaTek Chip.
       [not found]   ` <SL2PR03MB4457513693916CBA07BE450BB3CC9@SL2PR03MB4457.apcprd03.prod.outlook.com>
@ 2021-08-31 12:31     ` Marcel Holtmann
  0 siblings, 0 replies; 5+ messages in thread
From: Marcel Holtmann @ 2021-08-31 12:31 UTC (permalink / raw)
  To: "Mark-YW Chen (陳揚文)"
  Cc: Johan Hedberg, Sean Wang, linux-bluetooth, linux-mediatek,
	linux-kernel, michaelfsun, mcchou

Hi Mark,

>>> The MediaTek chip support vendor specific HCI command(0xfc1a) to
>>> change the public address. Add hdev->set_bdaddr handler for MediaTek
>>> Chip.
>>> 
>>> Signed-off-by: mark-yw.chen <mark-yw.chen@mediatek.com>
>>> ---
>>> drivers/bluetooth/btusb.c | 18 ++++++++++++++++++
>>> 1 file changed, 18 insertions(+)
>>> 
>>> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
>>> index 60d2fce59a71..41e7c9f28d82 100644
>>> --- a/drivers/bluetooth/btusb.c
>>> +++ b/drivers/bluetooth/btusb.c
>>> @@ -2200,6 +2200,23 @@ struct btmtk_section_map {
>>> 	};
>>> } __packed;
>>> 
>>> +static int btusb_set_bdaddr_mtk(struct hci_dev *hdev, const bdaddr_t
>>> +*bdaddr) {
>>> +	struct sk_buff *skb;
>>> +	long ret;
>>> +
>>> +	skb = __hci_cmd_sync(hdev, 0xfc1a, sizeof(bdaddr), bdaddr,
>> HCI_INIT_TIMEOUT);
>>> +	if (IS_ERR(skb)) {
>>> +		ret = PTR_ERR(skb);
>>> +		bt_dev_err(hdev, "changing Mediatek device address failed
>> (%ld)",
>>> +			   ret);
>>> +		return ret;
>>> +	}
>>> +	kfree_skb(skb);
>>> +
>>> +	return 0;
>>> +}
>>> +
>> 
>> this is not a permanent change, correct? Meaning a power cycle will bring back
>> the original BD_ADDR?
>> 
> 
> Yes, it's not a permanent change.
> After doing a power cycle or Mediatek specific Bluetooth reset, Mediatek Chips will bring back the original  BD_ADDRESS.

ok, good. Then please re-submit against latest bluetooth-next tree. Unfortunately current patch doesn’t apply anymore.

Regards

Marcel


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2021-08-31 12:31 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-08-24 15:44 [PATCH 1/2] Bluetooth: btusb: Support public address configuration for MediaTek Chip mark-yw.chen
2021-08-24 15:44 ` [PATCH 2/2] Bluetooth: btusb: Add protocol for MediaTek bluetooth devices(MT7922) mark-yw.chen
2021-08-30 15:04   ` Marcel Holtmann
2021-08-30 15:03 ` [PATCH 1/2] Bluetooth: btusb: Support public address configuration for MediaTek Chip Marcel Holtmann
     [not found]   ` <SL2PR03MB4457513693916CBA07BE450BB3CC9@SL2PR03MB4457.apcprd03.prod.outlook.com>
2021-08-31 12:31     ` Marcel Holtmann

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).