Linux-MIPS Archive on lore.kernel.org
 help / color / Atom feed
From: Zhou Yanjie <zhouyanjie@zoho.com>
To: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, jason@lakedaemon.net,
	paul.burton@mips.com, allison@lohutok.net, syq@debian.org,
	rfontana@redhat.com, tglx@linutronix.de, paul@crapouillou.net,
	maz@kernel.org
Subject: [PATCH 5/5 v6] irqchip: Ingenic: Add process for more than one irq at the same time.
Date: Sat, 12 Oct 2019 13:53:50 +0800
Message-ID: <1570859630-50942-6-git-send-email-zhouyanjie@zoho.com> (raw)
In-Reply-To: <1570859630-50942-1-git-send-email-zhouyanjie@zoho.com>

Add process for the situation that more than one irq is coming to
a single chip at the same time. The original code will only respond
to the lowest setted bit in JZ_REG_INTC_PENDING, and then exit the
interrupt dispatch function. After exiting the interrupt dispatch
function, since the second interrupt has not yet responded, the
interrupt dispatch function is again entered to process the second
interrupt. This creates additional unnecessary overhead, and the
more interrupts that occur at the same time, the more overhead is
added. The improved method in this patch is to check whether there
are still unresponsive interrupts after processing the lowest
setted bit interrupt. If there are any, the processing will be
processed according to the bit in JZ_REG_INTC_PENDING, and the
interrupt dispatch function will be exited until all processing
is completed.

Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
---
 drivers/irqchip/irq-ingenic.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/irqchip/irq-ingenic.c b/drivers/irqchip/irq-ingenic.c
index 06ab3ad..01d18b3 100644
--- a/drivers/irqchip/irq-ingenic.c
+++ b/drivers/irqchip/irq-ingenic.c
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
  *  Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
- *  JZ4740 platform IRQ support
+ *  Ingenic XBurst platform IRQ support
  */
 
 #include <linux/errno.h>
@@ -37,18 +37,23 @@ static irqreturn_t intc_cascade(int irq, void *data)
 	struct ingenic_intc_data *intc = irq_get_handler_data(irq);
 	struct irq_domain *domain = intc->domain;
 	struct irq_chip_generic *gc;
-	uint32_t irq_reg;
+	uint32_t pending;
 	unsigned i;
 
 	for (i = 0; i < intc->num_chips; i++) {
 		gc = irq_get_domain_generic_chip(domain, i * 32);
 
-		irq_reg = irq_reg_readl(gc, JZ_REG_INTC_PENDING);
-		if (!irq_reg)
+		pending = irq_reg_readl(gc, JZ_REG_INTC_PENDING);
+		if (!pending)
 			continue;
 
-		irq = irq_find_mapping(domain, __fls(irq_reg) + (i * 32));
-		generic_handle_irq(irq);
+		while (pending) {
+			int bit = __fls(pending);
+
+			irq = irq_find_mapping(domain, bit + (i * 32));
+			generic_handle_irq(irq);
+			pending &= ~BIT(bit);
+		}
 	}
 
 	return IRQ_HANDLED;
-- 
2.7.4



      parent reply index

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-26 15:38 Add Ingenic X1000 irqchip support Zhou Yanjie
2019-01-26 15:38 ` [PATCH 1/4] Irqchip: Ingenic: Change interrupt handling form cascade to chained_irq Zhou Yanjie
2019-01-27 10:21   ` Marc Zyngier
2019-01-27 14:49     ` Zhou Yanjie
2019-01-27 15:50   ` Add Ingenic X1000 irqchip support v2 Zhou Yanjie
2019-01-27 15:50     ` [PATCH v2 1/4] Irqchip: Ingenic: Change interrupt handling form cascade to chained_irq Zhou Yanjie
2019-01-27 15:50     ` [PATCH v2 2/4] Irqchip: Ingenic: Unify the function name prefix to "ingenic_intc_" Zhou Yanjie
2019-01-27 15:50     ` [PATCH v2 3/4] Irqchip: Ingenic: Add support for the X1000 Zhou Yanjie
2019-01-27 15:50     ` [PATCH v2 4/4] " Zhou Yanjie
2019-01-30 19:43       ` Rob Herring
2019-01-26 15:38 ` [PATCH 2/4] Irqchip: Ingenic: Unify the function name prefix to "ingenic_intc_" Zhou Yanjie
2019-01-26 15:38 ` [PATCH 3/4] Irqchip: Ingenic: Add support for the X1000 Zhou Yanjie
2019-01-27 10:14   ` Marc Zyngier
2019-01-27 14:51     ` Zhou Yanjie
2019-01-26 15:38 ` [PATCH 4/4] " Zhou Yanjie
2019-07-15 12:09 ` Add Ingenic JZ4760 and X1000 and X1500 irqchip support v3 Zhou Yanjie
2019-07-15 12:09   ` [PATCH v3 1/8] irqchip: Ingenic: Change interrupt handling form cascade to chained_irq Zhou Yanjie
2019-07-15 12:09   ` [PATCH v3 2/8] irqchip: Ingenic: Unify the function name prefix to "ingenic_intc_" Zhou Yanjie
2019-07-15 12:09   ` [PATCH v3 3/8] dt-bindings: interrupt-controller: Add JZ4760 and JZ4760B bindings Zhou Yanjie
2019-07-26 13:36     ` Marc Zyngier
2019-07-28 17:39       ` Zhou Yanjie
2019-07-15 12:09   ` [PATCH v3 4/8] irqchip: Ingenic: Add support for JZ4760 and JZ4760B Zhou Yanjie
2019-07-15 12:09   ` [PATCH v3 5/8] dt-bindings: interrupt-controller: Add X1000 and X1000E bindings Zhou Yanjie
2019-07-15 12:09   ` [PATCH v3 6/8] irqchip: Ingenic: Add support for X1000 and X1000E Zhou Yanjie
2019-07-15 12:09   ` [PATCH v3 7/8] dt-bindings: interrupt-controller: Add X1500 bindings Zhou Yanjie
2019-07-15 12:09   ` [PATCH v3 8/8] irqchip: Ingenic: Add support for X1500 Zhou Yanjie
2019-07-28 17:34 ` Add Ingenic JZ4760 and X1000 and X1500 irqchip support v4 Zhou Yanjie
2019-07-28 17:34   ` [PATCH 1/4 v4] irqchip: Ingenic: Change interrupt handling form cascade to chained_irq Zhou Yanjie
2019-07-29 17:19     ` Paul Cercueil
2019-07-30  6:41       ` Zhou Yanjie
2019-07-28 17:34   ` [PATCH 2/4 v4] irqchip: Ingenic: Unify the function name prefix to "ingenic_intc_" Zhou Yanjie
2019-07-28 17:34   ` [PATCH 3/4 v4] dt-bindings: interrupt-controller: Add new Ingenic Socs bindings Zhou Yanjie
2019-07-28 17:34   ` [PATCH 4/4 v4] irqchip: Ingenic: Add support for new Ingenic Socs Zhou Yanjie
2019-07-29 17:25     ` Paul Cercueil
2019-07-30  6:26       ` Zhou Yanjie
2019-10-02 11:25 ` Add process for more than one irq at the same time v5 Zhou Yanjie
2019-10-02 11:25   ` [PATCH 1/5 v5] irqchip: ingenic: Drop redundant irq_suspend / irq_resume functions Zhou Yanjie
2019-10-06  0:13     ` Paul Cercueil
2019-10-06  6:01       ` Zhou Yanjie
2019-10-02 11:25   ` [PATCH 2/5 v5] irqchip: ingenic: Error out if IRQ domain creation failed Zhou Yanjie
2019-10-02 11:25   ` [PATCH 3/5 v5] irqchip: ingenic: Get virq number from IRQ domain Zhou Yanjie
2019-10-02 11:25   ` [PATCH 4/5 v5] irqchip: ingenic: Alloc generic chips " Zhou Yanjie
2019-10-02 11:25   ` [PATCH 5/5 v5] irqchip: Ingenic: Add process for more than one irq at the same time Zhou Yanjie
2019-10-06  0:15     ` Paul Cercueil
2019-10-12  5:53 ` Add process for more than one irq at the same time v6 Zhou Yanjie
2019-10-12  5:53   ` [PATCH 1/5 v6] irqchip: ingenic: Drop redundant irq_suspend / irq_resume functions Zhou Yanjie
2019-11-11 10:49     ` Marc Zyngier
2019-10-12  5:53   ` [PATCH 2/5 v6] irqchip: ingenic: Error out if IRQ domain creation failed Zhou Yanjie
2019-10-12  5:53   ` [PATCH 3/5 v6] irqchip: ingenic: Get virq number from IRQ domain Zhou Yanjie
2019-10-12  5:53   ` [PATCH 4/5 v6] irqchip: ingenic: Alloc generic chips " Zhou Yanjie
2019-10-12  5:53   ` Zhou Yanjie [this message]

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1570859630-50942-6-git-send-email-zhouyanjie@zoho.com \
    --to=zhouyanjie@zoho.com \
    --cc=allison@lohutok.net \
    --cc=jason@lakedaemon.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=maz@kernel.org \
    --cc=paul.burton@mips.com \
    --cc=paul@crapouillou.net \
    --cc=rfontana@redhat.com \
    --cc=syq@debian.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-MIPS Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-mips/0 linux-mips/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-mips linux-mips/ https://lore.kernel.org/linux-mips \
		linux-mips@vger.kernel.org
	public-inbox-index linux-mips

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-mips


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git