linux-mips.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jiaxun Yang <jiaxun.yang@flygoat.com>
To: linux-mips@vger.kernel.org
Cc: chenhc@lemote.com, paul.burton@mips.com, tglx@linutronix.de,
	jason@lakedaemon.net, maz@kernel.org,
	linux-kernel@vger.kernel.org, robh+dt@kernel.org,
	mark.rutland@arm.co, devicetree@vger.kernel.org,
	Jiaxun Yang <jiaxun.yang@flygoat.com>
Subject: [PATCH v1 15/18] MIPS: Loongson64: Load built-in dtbs
Date: Fri, 30 Aug 2019 12:32:29 +0800	[thread overview]
Message-ID: <20190830043232.20191-10-jiaxun.yang@flygoat.com> (raw)
In-Reply-To: <20190830043232.20191-1-jiaxun.yang@flygoat.com>

Load proper dtb according to firmware passed parameters and
CPU PRID.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
---
 .../asm/mach-loongson64/builtin_dtbs.h        | 26 +++++++
 .../include/asm/mach-loongson64/loongson64.h  |  2 +
 arch/mips/loongson64/env.c                    | 67 +++++++++++++++++++
 arch/mips/loongson64/setup.c                  | 15 +++++
 4 files changed, 110 insertions(+)
 create mode 100644 arch/mips/include/asm/mach-loongson64/builtin_dtbs.h

diff --git a/arch/mips/include/asm/mach-loongson64/builtin_dtbs.h b/arch/mips/include/asm/mach-loongson64/builtin_dtbs.h
new file mode 100644
index 000000000000..106287d54069
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson64/builtin_dtbs.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2019 Jiaxun Yang <jiaxun.yang@flygoat.com>
+ *
+ * Built-in Generic dtbs for MACH_LOONGSON64
+ */
+
+#ifndef __ASM_MACH_LOONGSON64_BUILTIN_DTBS_H_
+#define __ASM_MACH_LOONGSON64_BUILTIN_DTBS_H_
+
+extern u32 __dtb_ls3a1000_780e_1way_begin[];
+extern u32 __dtb_ls3a1000_780e_2way_begin[];
+extern u32 __dtb_ls3a1000_780e_4way_begin[];
+
+extern u32 __dtb_ls3b_780e_1way_begin[];
+extern u32 __dtb_ls3b_780e_2way_begin[];
+
+extern u32 __dtb_ls3a2000_780e_1way_begin[];
+extern u32 __dtb_ls3a2000_780e_2way_begin[];
+extern u32 __dtb_ls3a2000_780e_4way_begin[];
+
+extern u32 __dtb_ls3a3000_780e_1way_begin[];
+extern u32 __dtb_ls3a3000_780e_2way_begin[];
+extern u32 __dtb_ls3a3000_780e_4way_begin[];
+
+#endif
diff --git a/arch/mips/include/asm/mach-loongson64/loongson64.h b/arch/mips/include/asm/mach-loongson64/loongson64.h
index d877adb99d33..78daa3fb3fa7 100644
--- a/arch/mips/include/asm/mach-loongson64/loongson64.h
+++ b/arch/mips/include/asm/mach-loongson64/loongson64.h
@@ -45,4 +45,6 @@ extern u64 loongson_freqctrl[MAX_PACKAGES];
 
 extern const struct plat_smp_ops loongson3_smp_ops;
 extern void __init prom_init_lefi(void);
+extern void *loongson_fdt_blob;
+
 #endif
diff --git a/arch/mips/loongson64/env.c b/arch/mips/loongson64/env.c
index 93658cfbf3a6..e46203c4a348 100644
--- a/arch/mips/loongson64/env.c
+++ b/arch/mips/loongson64/env.c
@@ -20,6 +20,7 @@
 
 #include <loongson64.h>
 #include <boot_param.h>
+#include <builtin_dtbs.h>
 #include <workarounds.h>
 
 u32 cpu_clock_freq;
@@ -126,6 +127,72 @@ void __init prom_init_lefi(void)
 		loongson_sysconf.cores_per_node - 1) /
 		loongson_sysconf.cores_per_node;
 
+	if ((read_c0_prid() & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64) {
+		switch (read_c0_prid() & PRID_REV_MASK) {
+		case PRID_REV_LOONGSON3A_R1:
+			switch (loongson_sysconf.nr_nodes) {
+			case 4:
+				loongson_fdt_blob = __dtb_ls3a1000_780e_4way_begin;
+				break;
+			case 2:
+				loongson_fdt_blob = __dtb_ls3a1000_780e_2way_begin;
+				break;
+			case 1:
+			default:
+				loongson_fdt_blob = __dtb_ls3a1000_780e_1way_begin;
+				break;
+			}
+			break;
+		case PRID_REV_LOONGSON3A_R2_0:
+		case PRID_REV_LOONGSON3A_R2_1:
+			switch (loongson_sysconf.nr_nodes) {
+			case 4:
+				loongson_fdt_blob = __dtb_ls3a2000_780e_4way_begin;
+				break;
+			case 2:
+				loongson_fdt_blob = __dtb_ls3a2000_780e_2way_begin;
+				break;
+			case 1:
+			default:
+				loongson_fdt_blob = __dtb_ls3a2000_780e_1way_begin;
+				break;
+			}
+			break;
+		case PRID_REV_LOONGSON3A_R3_0:
+		case PRID_REV_LOONGSON3A_R3_1:
+			switch (loongson_sysconf.nr_nodes) {
+			case 4:
+				loongson_fdt_blob = __dtb_ls3a3000_780e_4way_begin;
+				break;
+			case 2:
+				loongson_fdt_blob = __dtb_ls3a3000_780e_2way_begin;
+				break;
+			case 1:
+			default:
+				loongson_fdt_blob = __dtb_ls3a3000_780e_1way_begin;
+				break;
+			}
+			break;
+		case PRID_REV_LOONGSON3B_R1:
+		case PRID_REV_LOONGSON3B_R2:
+			switch (loongson_sysconf.nr_nodes) {
+			case 4:
+				loongson_fdt_blob = __dtb_ls3b_780e_2way_begin;
+				break;
+			case 2:
+			default:
+				loongson_fdt_blob = __dtb_ls3b_780e_1way_begin;
+				break;
+			}
+			break;
+		default:
+			break;
+		}
+	}
+
+	if (!loongson_fdt_blob)
+		pr_err("Failed to determine built-in Loongson64 dtb\n");
+
 	loongson_sysconf.pci_mem_start_addr = eirq_source->pci_mem_start_addr;
 	loongson_sysconf.pci_mem_end_addr = eirq_source->pci_mem_end_addr;
 	loongson_sysconf.pci_io_base = eirq_source->pci_io_start_addr;
diff --git a/arch/mips/loongson64/setup.c b/arch/mips/loongson64/setup.c
index 24432adc8350..3b850b3128ea 100644
--- a/arch/mips/loongson64/setup.c
+++ b/arch/mips/loongson64/setup.c
@@ -7,9 +7,15 @@
 #include <asm/setup.h>
 #include <asm/smp-ops.h>
 #include <asm/cacheflush.h>
+#include <linux/libfdt.h>
+#include <linux/of_fdt.h>
+
+#include <asm/prom.h>
 
 #include <loongson64.h>
 
+void *loongson_fdt_blob;
+
 static void wbflush_loongson(void)
 {
 	asm(".set\tpush\n\t"
@@ -81,6 +87,8 @@ void __init prom_free_prom_memory(void)
 
 void __init plat_mem_setup(void)
 {
+	if (loongson_fdt_blob)
+		__dt_setup_arch(loongson_fdt_blob);
 }
 
 void __init plat_time_init(void)
@@ -90,3 +98,10 @@ void __init plat_time_init(void)
 #endif
 }
 
+void __init device_tree_init(void)
+{
+	if (!initial_boot_params)
+		return;
+
+	unflatten_and_copy_device_tree();
+}
-- 
2.22.0


  parent reply	other threads:[~2019-08-30  4:35 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-30  4:32 [PATCH v1 06/18] dt-bindings: interrupt-controller: Add Loongson-3 IOINTC Jiaxun Yang
2019-08-30  4:32 ` [PATCH v1 07/18] irqchip: Add driver for Loongson-3 HyperTransport interrupt controller Jiaxun Yang
2019-08-30  4:32 ` [PATCH v1 08/18] dt-bindings: interrupt-controller: Add Loongson-3 HTINTC Jiaxun Yang
2019-09-02 13:39   ` Rob Herring
2019-08-30  4:32 ` [PATCH v1 09/18] irqchip: i8259: Add plat-poll support Jiaxun Yang
2019-08-30  4:32 ` [PATCH v1 10/18] irqchip: mips-cpu: Convert to simple domain Jiaxun Yang
2019-08-30  4:32 ` [PATCH v1 11/18] MIPS: Loongson64: Drop legacy IRQ code Jiaxun Yang
2019-08-30  4:32 ` [PATCH v1 12/18] dt-bindings: mips: Add loongson cpus & boards Jiaxun Yang
2019-09-13 14:36   ` Rob Herring
2019-08-30  4:32 ` [PATCH v1 13/18] dt-bindings: Document loongson vendor-prefix Jiaxun Yang
2019-09-02 13:39   ` Rob Herring
2019-08-30  4:32 ` [PATCH v1 14/18] MIPS: Loongson64: Add generic dts Jiaxun Yang
     [not found]   ` <tencent_1942EDDF41E4786E357A4E9D@qq.com>
2019-09-04  6:08     ` Jiaxun Yang
2019-08-30  4:32 ` Jiaxun Yang [this message]
2019-08-30  4:32 ` [PATCH v1 16/18] MIPS: Loongson: Regenerate defconfigs Jiaxun Yang
2019-08-30  4:32 ` [PATCH v1 17/18] MAINTAINERS: Add new pathes to LOONGSON64 ARCHITECTURE Jiaxun Yang
2019-08-30  4:32 ` [PATCH v1 18/18] MAINTAINERS: Add myself as maintainer of LOONGSON64 Jiaxun Yang
2019-09-02 13:38 ` [PATCH v1 06/18] dt-bindings: interrupt-controller: Add Loongson-3 IOINTC Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190830043232.20191-10-jiaxun.yang@flygoat.com \
    --to=jiaxun.yang@flygoat.com \
    --cc=chenhc@lemote.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jason@lakedaemon.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=mark.rutland@arm.co \
    --cc=maz@kernel.org \
    --cc=paul.burton@mips.com \
    --cc=robh+dt@kernel.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).