linux-mips.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jiaxun Yang <jiaxun.yang@flygoat.com>
To: linux-mips@vger.kernel.org
Cc: chenhc@lemote.com, paul.burton@mips.com, tglx@linutronix.de,
	jason@lakedaemon.net, maz@kernel.org,
	linux-kernel@vger.kernel.org, robh+dt@kernel.org,
	mark.rutland@arm.co, devicetree@vger.kernel.org,
	Jiaxun Yang <jiaxun.yang@flygoat.com>
Subject: [PATCH v1 16/18] MIPS: Loongson: Regenerate defconfigs
Date: Fri, 30 Aug 2019 12:32:30 +0800	[thread overview]
Message-ID: <20190830043232.20191-11-jiaxun.yang@flygoat.com> (raw)
In-Reply-To: <20190830043232.20191-1-jiaxun.yang@flygoat.com>

We've touched kconfig a lot in previous patches.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
---
 arch/mips/configs/fuloong2e_defconfig |  8 +++-----
 arch/mips/configs/lemote2f_defconfig  |  8 ++------
 arch/mips/configs/loongson3_defconfig | 12 ++++--------
 3 files changed, 9 insertions(+), 19 deletions(-)

diff --git a/arch/mips/configs/fuloong2e_defconfig b/arch/mips/configs/fuloong2e_defconfig
index 7a7af706e898..ae8a904ef812 100644
--- a/arch/mips/configs/fuloong2e_defconfig
+++ b/arch/mips/configs/fuloong2e_defconfig
@@ -15,8 +15,7 @@ CONFIG_EXPERT=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
 CONFIG_PROFILING=y
-CONFIG_MACH_LOONGSON64=y
-CONFIG_PCI=y
+CONFIG_MACH_LOONGSON2EF=y
 CONFIG_MIPS32_O32=y
 CONFIG_MIPS32_N32=y
 # CONFIG_SUSPEND is not set
@@ -36,8 +35,6 @@ CONFIG_IP_MULTICAST=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_NET_IPIP=m
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
@@ -83,6 +80,7 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_PHONET=m
 CONFIG_NET_9P=m
+CONFIG_PCI=y
 CONFIG_FW_LOADER=m
 CONFIG_MTD=m
 CONFIG_MTD_BLOCK=m
@@ -142,6 +140,7 @@ CONFIG_HW_RANDOM=y
 CONFIG_I2C=m
 CONFIG_I2C_CHARDEV=m
 CONFIG_I2C_VIAPRO=m
+CONFIG_GPIOLIB=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y
 CONFIG_FB_RADEON=y
@@ -217,7 +216,6 @@ CONFIG_NLS_CODEPAGE_936=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=y
 CONFIG_CRYPTO_AUTHENC=m
-CONFIG_CRYPTO_GCM=m
 CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_XTS=m
diff --git a/arch/mips/configs/lemote2f_defconfig b/arch/mips/configs/lemote2f_defconfig
index d44f1469cf64..0cbe1240314d 100644
--- a/arch/mips/configs/lemote2f_defconfig
+++ b/arch/mips/configs/lemote2f_defconfig
@@ -12,11 +12,10 @@ CONFIG_LOG_BUF_SHIFT=15
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 CONFIG_PROFILING=y
-CONFIG_MACH_LOONGSON64=y
+CONFIG_MACH_LOONGSON2EF=y
 CONFIG_LEMOTE_MACH2F=y
 CONFIG_KEXEC=y
 # CONFIG_SECCOMP is not set
-CONFIG_PCI=y
 CONFIG_MIPS32_O32=y
 CONFIG_MIPS32_N32=y
 CONFIG_HIBERNATION=y
@@ -26,7 +25,6 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_BLK_DEV_INTEGRITY=y
-CONFIG_IOSCHED_DEADLINE=m
 CONFIG_BINFMT_MISC=m
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -44,9 +42,6 @@ CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
 CONFIG_SYN_COOKIES=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
 CONFIG_TCP_CONG_ADVANCED=y
 CONFIG_TCP_CONG_BIC=y
 CONFIG_DEFAULT_BIC=y
@@ -77,6 +72,7 @@ CONFIG_MAC80211=m
 CONFIG_MAC80211_LEDS=y
 CONFIG_RFKILL=m
 CONFIG_RFKILL_INPUT=y
+CONFIG_PCI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_RAM=y
diff --git a/arch/mips/configs/loongson3_defconfig b/arch/mips/configs/loongson3_defconfig
index 90ee0084d786..66fb44b4d845 100644
--- a/arch/mips/configs/loongson3_defconfig
+++ b/arch/mips/configs/loongson3_defconfig
@@ -24,15 +24,9 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_EMBEDDED=y
 CONFIG_MACH_LOONGSON64=y
-CONFIG_LOONGSON_MACH3X=y
 CONFIG_SMP=y
 CONFIG_HZ_256=y
 CONFIG_KEXEC=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_HOTPLUG_PCI_PCIE=y
-# CONFIG_PCIEAER is not set
-CONFIG_PCIEASPM_PERFORMANCE=y
-CONFIG_HOTPLUG_PCI=y
 CONFIG_MIPS32_O32=y
 CONFIG_MIPS32_N32=y
 CONFIG_MODULES=y
@@ -41,8 +35,6 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_PARTITION_ADVANCED=y
-CONFIG_IOSCHED_DEADLINE=m
-CONFIG_CFQ_GROUP_IOSCHED=y
 CONFIG_BINFMT_MISC=m
 CONFIG_KSM=y
 CONFIG_NET=y
@@ -97,6 +89,10 @@ CONFIG_CFG80211_WEXT=y
 CONFIG_MAC80211=m
 CONFIG_RFKILL=m
 CONFIG_RFKILL_INPUT=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_HOTPLUG_PCI_PCIE=y
+CONFIG_PCIEASPM_PERFORMANCE=y
+CONFIG_HOTPLUG_PCI=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=m
-- 
2.22.0


  parent reply	other threads:[~2019-08-30  4:35 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-30  4:32 [PATCH v1 06/18] dt-bindings: interrupt-controller: Add Loongson-3 IOINTC Jiaxun Yang
2019-08-30  4:32 ` [PATCH v1 07/18] irqchip: Add driver for Loongson-3 HyperTransport interrupt controller Jiaxun Yang
2019-08-30  4:32 ` [PATCH v1 08/18] dt-bindings: interrupt-controller: Add Loongson-3 HTINTC Jiaxun Yang
2019-09-02 13:39   ` Rob Herring
2019-08-30  4:32 ` [PATCH v1 09/18] irqchip: i8259: Add plat-poll support Jiaxun Yang
2019-08-30  4:32 ` [PATCH v1 10/18] irqchip: mips-cpu: Convert to simple domain Jiaxun Yang
2019-08-30  4:32 ` [PATCH v1 11/18] MIPS: Loongson64: Drop legacy IRQ code Jiaxun Yang
2019-08-30  4:32 ` [PATCH v1 12/18] dt-bindings: mips: Add loongson cpus & boards Jiaxun Yang
2019-09-13 14:36   ` Rob Herring
2019-08-30  4:32 ` [PATCH v1 13/18] dt-bindings: Document loongson vendor-prefix Jiaxun Yang
2019-09-02 13:39   ` Rob Herring
2019-08-30  4:32 ` [PATCH v1 14/18] MIPS: Loongson64: Add generic dts Jiaxun Yang
     [not found]   ` <tencent_1942EDDF41E4786E357A4E9D@qq.com>
2019-09-04  6:08     ` Jiaxun Yang
2019-08-30  4:32 ` [PATCH v1 15/18] MIPS: Loongson64: Load built-in dtbs Jiaxun Yang
2019-08-30  4:32 ` Jiaxun Yang [this message]
2019-08-30  4:32 ` [PATCH v1 17/18] MAINTAINERS: Add new pathes to LOONGSON64 ARCHITECTURE Jiaxun Yang
2019-08-30  4:32 ` [PATCH v1 18/18] MAINTAINERS: Add myself as maintainer of LOONGSON64 Jiaxun Yang
2019-09-02 13:38 ` [PATCH v1 06/18] dt-bindings: interrupt-controller: Add Loongson-3 IOINTC Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190830043232.20191-11-jiaxun.yang@flygoat.com \
    --to=jiaxun.yang@flygoat.com \
    --cc=chenhc@lemote.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jason@lakedaemon.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=mark.rutland@arm.co \
    --cc=maz@kernel.org \
    --cc=paul.burton@mips.com \
    --cc=robh+dt@kernel.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).