From: Piotr Sroka <piotrs@cadence.com>
To: <linux-kernel@vger.kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org,
Boris Brezillon <bbrezillon@kernel.org>,
Richard Weinberger <richard@nod.at>,
Marek Vasut <marek.vasut@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
linux-mtd@lists.infradead.org,
BrianNorris <computersforpeace@gmail.com>,
David Woodhouse <dwmw2@infradead.org>,
Kazuhiro Kasai <kasai.kazuhiro@socionext.com>,
Piotr Sroka <piotrs@cadence.com>
Subject: [v5 2/2] dt-bindings: mtd: Add Cadence NAND controller driver
Date: Thu, 25 Jul 2019 15:59:55 +0100 [thread overview]
Message-ID: <20190725145955.13951-1-piotrs@cadence.com> (raw)
In-Reply-To: <20190725145804.8886-1-piotrs@cadence.com>
Document the bindings used by Cadence NAND controller driver
Signed-off-by: Piotr Sroka <piotrs@cadence.com>
---
Changes for v5:
- replace "_" by "-" in all properties
- change compatible name from cdns,hpnfc to cdns,hp-nfc
Changes for v4:
- add commit message
Changes for v3:
- add unit suffix for board_delay
- move child description to proper place
- remove prefix cadence_ for reg and sdma fields
Changes for v2:
- remove chip dependends parameters from dts bindings
- add names for register ranges in dts bindings
- add generic bindings to describe NAND chip representation
---
.../bindings/mtd/cadence-nand-controller.txt | 50 ++++++++++++++++++++++
1 file changed, 50 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt
diff --git a/Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt b/Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt
new file mode 100644
index 000000000000..423547a3f993
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt
@@ -0,0 +1,50 @@
+* Cadence NAND controller
+
+Required properties:
+ - compatible : "cdns,hp-nfc"
+ - reg : Contains two entries, each of which is a tuple consisting of a
+ physical address and length. The first entry is the address and
+ length of the controller register set. The second entry is the
+ address and length of the Slave DMA data port.
+ - reg-names: should contain "reg" and "sdma"
+ - interrupts : The interrupt number.
+ - clocks: phandle of the controller core clock (nf_clk).
+
+Optional properties:
+ - dmas: shall reference DMA channel associated to the NAND controller
+ - cdns,board-delay-ps : Estimated Board delay. The value includes the total
+ round trip delay for the signals and is used for deciding on values
+ associated with data read capture. The example formula for SDR mode is
+ the following:
+ board delay = RE#PAD delay + PCB trace to device + PCB trace from device
+ + DQ PAD delay
+
+Child nodes represent the available NAND chips.
+
+Required properties of NAND chips:
+ - reg: shall contain the native Chip Select ids from 0 to max supported by
+ the cadence nand flash controller
+
+
+See Documentation/devicetree/bindings/mtd/nand.txt for more details on
+generic bindings.
+
+Example:
+
+nand_controller: nand-controller @60000000 {
+ compatible = "cdns,hp-nfc";
+ reg = <0x60000000 0x10000>, <0x80000000 0x10000>;
+ reg-names = "reg", "sdma";
+ clocks = <&nf_clk>;
+ cdns,board-delay-ps = <4830>;
+ interrupts = <2 0>;
+ nand@0 {
+ reg = <0>;
+ label = "nand-1";
+ };
+ nand@1 {
+ reg = <1>;
+ label = "nand-2";
+ };
+
+};
--
2.15.0
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next prev parent reply other threads:[~2019-07-25 15:01 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-25 14:58 [v5 0/2] mtd: nand: Add Cadence NAND controller driver Piotr Sroka
2019-07-25 14:59 ` Piotr Sroka [this message]
2019-08-16 21:31 ` [v5 2/2] dt-bindings: mtd: " Rob Herring
2019-08-30 9:46 ` Miquel Raynal
2019-09-11 15:04 ` Piotr Sroka
2019-09-13 12:49 ` Miquel Raynal
2019-09-13 14:41 ` Piotr Sroka
2019-07-25 15:00 ` [v5 1/2] mtd: nand: Add new Cadence NAND driver to MTD subsystem Piotr Sroka
2019-07-25 15:11 ` Dmitry Osipenko
2019-08-24 10:49 ` Miquel Raynal
2019-08-26 15:09 ` Dmitry Osipenko
2019-08-30 9:46 ` Miquel Raynal
2019-09-11 9:43 ` Piotr Sroka
2019-09-11 12:29 ` Miquel Raynal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190725145955.13951-1-piotrs@cadence.com \
--to=piotrs@cadence.com \
--cc=bbrezillon@kernel.org \
--cc=computersforpeace@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dwmw2@infradead.org \
--cc=kasai.kazuhiro@socionext.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=marek.vasut@gmail.com \
--cc=mark.rutland@arm.com \
--cc=richard@nod.at \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).