linux-mtd.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v23 00/18] ARM Primecell PL35x support
@ 2021-06-10  8:20 Miquel Raynal
  2021-06-10  8:20 ` [PATCH v23 01/18] dt-binding: memory: pl353-smc: Rephrase the binding Miquel Raynal
                   ` (20 more replies)
  0 siblings, 21 replies; 33+ messages in thread
From: Miquel Raynal @ 2021-06-10  8:20 UTC (permalink / raw)
  To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus,
	linux-mtd, Rob Herring, devicetree, Krzysztof Kozlowski
  Cc: Michal Simek, Naga Sureshkumar Relli, Amit Kumar Mahapatra,
	Thomas Petazzoni, linux-arm-kernel, linux-kernel, helmut.grohne,
	Srinivas Goud, Siva Durga Prasad Paladugu, Miquel Raynal

Hello,

I am taking over Naga's series, here are the major changes:
* Cleaning of the SMC bus binding file (and yaml conversion)
* Superficial cleaning and great simplification of the SMC bus driver
* Addition of a yaml file describing the NAND controller
* Full rework of the NAND controller driver. JFFS2 and UBIFS not tested
  yet, only bare test tools have been used to proove basic correctness
  of the helpers.
* Addition of a couple of MAINTAINERS entries.

A Github branch named pl353 is available on my repository:
https://github.com/miquelraynal/linux/

Thanks,
Miquèl

Changes in v23:
- Collected Naga Acked-by's.
- Used const instead of single enum entries in the bindings.
- Dropped the address-cells/size-cells superfluous definitions out of
  the NAND controller binding.
- Enhanced the SMC reg property description to mention that the various
  CS are described in the ranges property.
- Fixed the SMC child nodes regex to match Rob's requirements.

Changes in v22:
- Misc typo fixes.
- Light rewording of a few commit titles.
- Not forgetting to Cc: Rob and Krzysztof this time...

Changes in v21:
- Added Rob's Acked-by/Reviewed-by tags.
- Addressed all comments from Rob and Michael about the bindings.
- Tested both JFFS2 and UBIFS with simple file I/O.

Miquel Raynal (18):
  dt-binding: memory: pl353-smc: Rephrase the binding
  dt-binding: memory: pl353-smc: Document the range property
  dt-binding: memory: pl353-smc: Drop the partitioning section
  dt-binding: memory: pl353-smc: Describe the child reg property
  dt-binding: memory: pl353-smc: Fix the example syntax and style
  dt-binding: memory: pl353-smc: Drop unsupported nodes from the example
  dt-binding: memory: pl353-smc: Fix the NAND controller node in the
    example
  dt-binding: memory: pl353-smc: Enhance the description of the reg
    property
  dt-binding: memory: pl353-smc: Convert to yaml
  memory: pl353-smc: Fix style
  memory: pl353-smc: Rename goto labels
  memory: pl353-smc: Let lower level controller drivers handle inits
  memory: pl353-smc: Avoid useless acronyms in descriptions
  memory: pl353-smc: Declare variables following a reverse christmas
    tree order
  MAINTAINERS: Add PL353 SMC entry
  MAINTAINERS: Add PL353 NAND controller entry
  dt-bindings: mtd: pl353-nand: Describe this hardware controller
  mtd: rawnand: pl353: Add support for the ARM PL353 SMC NAND controller

 .../memory-controllers/arm,pl353-smc.yaml     |  131 ++
 .../bindings/memory-controllers/pl353-smc.txt |   47 -
 .../bindings/mtd/arm,pl353-nand-r2p1.yaml     |   53 +
 MAINTAINERS                                   |   16 +
 drivers/memory/pl353-smc.c                    |  314 +----
 drivers/mtd/nand/raw/Kconfig                  |    8 +
 drivers/mtd/nand/raw/Makefile                 |    1 +
 drivers/mtd/nand/raw/pl35x-nand-controller.c  | 1194 +++++++++++++++++
 include/linux/pl353-smc.h                     |   30 -
 9 files changed, 1413 insertions(+), 381 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/memory-controllers/arm,pl353-smc.yaml
 delete mode 100644 Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
 create mode 100644 Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.yaml
 create mode 100644 drivers/mtd/nand/raw/pl35x-nand-controller.c
 delete mode 100644 include/linux/pl353-smc.h

-- 
2.27.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 33+ messages in thread

* [PATCH v23 01/18] dt-binding: memory: pl353-smc: Rephrase the binding
  2021-06-10  8:20 [PATCH v23 00/18] ARM Primecell PL35x support Miquel Raynal
@ 2021-06-10  8:20 ` Miquel Raynal
  2021-06-10  8:20 ` [PATCH v23 02/18] dt-binding: memory: pl353-smc: Document the range property Miquel Raynal
                   ` (19 subsequent siblings)
  20 siblings, 0 replies; 33+ messages in thread
From: Miquel Raynal @ 2021-06-10  8:20 UTC (permalink / raw)
  To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus,
	linux-mtd, Rob Herring, devicetree, Krzysztof Kozlowski
  Cc: Michal Simek, Naga Sureshkumar Relli, Amit Kumar Mahapatra,
	Thomas Petazzoni, linux-arm-kernel, linux-kernel, helmut.grohne,
	Srinivas Goud, Siva Durga Prasad Paladugu, Miquel Raynal,
	Rob Herring

Reword this document before converting it to yaml.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 .../bindings/memory-controllers/pl353-smc.txt         | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
index d56615fd343a..f0b7fe173668 100644
--- a/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
@@ -1,8 +1,7 @@
 Device tree bindings for ARM PL353 static memory controller
 
-PL353 static memory controller supports two kinds of memory
-interfaces.i.e NAND and SRAM/NOR interfaces.
-The actual devices are instantiated from the child nodes of pl353 smc node.
+PL353 Static Memory Controller is a bus where you can connect two kinds
+of memory interfaces: NAND and memory mapped interfaces (such as SRAM or NOR).
 
 Required properties:
 - compatible		: Should be "arm,pl353-smc-r2p1", "arm,primecell".
@@ -13,9 +12,9 @@ Required properties:
 - address-cells		: Must be 2.
 - size-cells		: Must be 1.
 
-Child nodes:
- For NAND the "arm,pl353-nand-r2p1" and for NOR the "cfi-flash" drivers are
-supported as child nodes.
+The child device node represents the controller connected to the SMC
+bus. Only one between: NAND controller, NOR controller and SRAM controller
+is allowed in a single system.
 
 for NAND partition information please refer the below file
 Documentation/devicetree/bindings/mtd/partition.txt
-- 
2.27.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 33+ messages in thread

* [PATCH v23 02/18] dt-binding: memory: pl353-smc: Document the range property
  2021-06-10  8:20 [PATCH v23 00/18] ARM Primecell PL35x support Miquel Raynal
  2021-06-10  8:20 ` [PATCH v23 01/18] dt-binding: memory: pl353-smc: Rephrase the binding Miquel Raynal
@ 2021-06-10  8:20 ` Miquel Raynal
  2021-06-10  8:20 ` [PATCH v23 03/18] dt-binding: memory: pl353-smc: Drop the partitioning section Miquel Raynal
                   ` (18 subsequent siblings)
  20 siblings, 0 replies; 33+ messages in thread
From: Miquel Raynal @ 2021-06-10  8:20 UTC (permalink / raw)
  To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus,
	linux-mtd, Rob Herring, devicetree, Krzysztof Kozlowski
  Cc: Michal Simek, Naga Sureshkumar Relli, Amit Kumar Mahapatra,
	Thomas Petazzoni, linux-arm-kernel, linux-kernel, helmut.grohne,
	Srinivas Goud, Siva Durga Prasad Paladugu, Miquel Raynal,
	Rob Herring

The ranges property is missing in the description while actually used in
the example. This property is actually needed, so mention it.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/memory-controllers/pl353-smc.txt        | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
index f0b7fe173668..4210acf46a55 100644
--- a/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
@@ -11,6 +11,8 @@ Required properties:
 - clocks		: Clock phandles (see clock bindings for details).
 - address-cells		: Must be 2.
 - size-cells		: Must be 1.
+- ranges		: Memory bus areas for interacting with the devices.
+			  Encodes CS to memory region association.
 
 The child device node represents the controller connected to the SMC
 bus. Only one between: NAND controller, NOR controller and SRAM controller
-- 
2.27.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 33+ messages in thread

* [PATCH v23 03/18] dt-binding: memory: pl353-smc: Drop the partitioning section
  2021-06-10  8:20 [PATCH v23 00/18] ARM Primecell PL35x support Miquel Raynal
  2021-06-10  8:20 ` [PATCH v23 01/18] dt-binding: memory: pl353-smc: Rephrase the binding Miquel Raynal
  2021-06-10  8:20 ` [PATCH v23 02/18] dt-binding: memory: pl353-smc: Document the range property Miquel Raynal
@ 2021-06-10  8:20 ` Miquel Raynal
  2021-06-10  8:20 ` [PATCH v23 04/18] dt-binding: memory: pl353-smc: Describe the child reg property Miquel Raynal
                   ` (17 subsequent siblings)
  20 siblings, 0 replies; 33+ messages in thread
From: Miquel Raynal @ 2021-06-10  8:20 UTC (permalink / raw)
  To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus,
	linux-mtd, Rob Herring, devicetree, Krzysztof Kozlowski
  Cc: Michal Simek, Naga Sureshkumar Relli, Amit Kumar Mahapatra,
	Thomas Petazzoni, linux-arm-kernel, linux-kernel, helmut.grohne,
	Srinivas Goud, Siva Durga Prasad Paladugu, Miquel Raynal,
	Rob Herring

This sentence does not belong to this file as this file describes the
bus on which various controllers are wired to.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/memory-controllers/pl353-smc.txt        | 2 --
 1 file changed, 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
index 4210acf46a55..233b2fd8525b 100644
--- a/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
@@ -18,8 +18,6 @@ The child device node represents the controller connected to the SMC
 bus. Only one between: NAND controller, NOR controller and SRAM controller
 is allowed in a single system.
 
-for NAND partition information please refer the below file
-Documentation/devicetree/bindings/mtd/partition.txt
 
 Example:
 	smcc: memory-controller@e000e000
-- 
2.27.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 33+ messages in thread

* [PATCH v23 04/18] dt-binding: memory: pl353-smc: Describe the child reg property
  2021-06-10  8:20 [PATCH v23 00/18] ARM Primecell PL35x support Miquel Raynal
                   ` (2 preceding siblings ...)
  2021-06-10  8:20 ` [PATCH v23 03/18] dt-binding: memory: pl353-smc: Drop the partitioning section Miquel Raynal
@ 2021-06-10  8:20 ` Miquel Raynal
  2021-06-10  8:20 ` [PATCH v23 05/18] dt-binding: memory: pl353-smc: Fix the example syntax and style Miquel Raynal
                   ` (16 subsequent siblings)
  20 siblings, 0 replies; 33+ messages in thread
From: Miquel Raynal @ 2021-06-10  8:20 UTC (permalink / raw)
  To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus,
	linux-mtd, Rob Herring, devicetree, Krzysztof Kozlowski
  Cc: Michal Simek, Naga Sureshkumar Relli, Amit Kumar Mahapatra,
	Thomas Petazzoni, linux-arm-kernel, linux-kernel, helmut.grohne,
	Srinivas Goud, Siva Durga Prasad Paladugu, Miquel Raynal,
	Rob Herring

Each chil node should have a reg property, no matter the type of
controller (NAND, NOR, SRAM). This should be part of the bindings.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/memory-controllers/pl353-smc.txt      | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
index 233b2fd8525b..105160c795a1 100644
--- a/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
@@ -18,6 +18,10 @@ The child device node represents the controller connected to the SMC
 bus. Only one between: NAND controller, NOR controller and SRAM controller
 is allowed in a single system.
 
+Required device node properties:
+
+- reg:			Contains the chip-select id, the offset and the length
+			of the memory region requested by the device.
 
 Example:
 	smcc: memory-controller@e000e000
-- 
2.27.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 33+ messages in thread

* [PATCH v23 05/18] dt-binding: memory: pl353-smc: Fix the example syntax and style
  2021-06-10  8:20 [PATCH v23 00/18] ARM Primecell PL35x support Miquel Raynal
                   ` (3 preceding siblings ...)
  2021-06-10  8:20 ` [PATCH v23 04/18] dt-binding: memory: pl353-smc: Describe the child reg property Miquel Raynal
@ 2021-06-10  8:20 ` Miquel Raynal
  2021-06-10  8:20 ` [PATCH v23 06/18] dt-binding: memory: pl353-smc: Drop unsupported nodes from the example Miquel Raynal
                   ` (15 subsequent siblings)
  20 siblings, 0 replies; 33+ messages in thread
From: Miquel Raynal @ 2021-06-10  8:20 UTC (permalink / raw)
  To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus,
	linux-mtd, Rob Herring, devicetree, Krzysztof Kozlowski
  Cc: Michal Simek, Naga Sureshkumar Relli, Amit Kumar Mahapatra,
	Thomas Petazzoni, linux-arm-kernel, linux-kernel, helmut.grohne,
	Srinivas Goud, Siva Durga Prasad Paladugu, Miquel Raynal,
	Rob Herring

Enhance the spacing, the comment style, add { }, remove (...).

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/memory-controllers/pl353-smc.txt | 48 ++++++++++---------
 1 file changed, 25 insertions(+), 23 deletions(-)

diff --git a/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
index 105160c795a1..46e17f5bc45b 100644
--- a/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
@@ -24,27 +24,29 @@ Required device node properties:
 			of the memory region requested by the device.
 
 Example:
-	smcc: memory-controller@e000e000
-			compatible = "arm,pl353-smc-r2p1", "arm,primecell";
-			clock-names = "memclk", "apb_pclk";
-			clocks = <&clkc 11>, <&clkc 44>;
-			reg = <0xe000e000 0x1000>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			ranges = <0x0 0x0 0xe1000000 0x1000000 //Nand CS Region
-				  0x1 0x0 0xe2000000 0x2000000 //SRAM/NOR CS Region
-				  0x2 0x0 0xe4000000 0x2000000>; //SRAM/NOR CS Region
-			nand_0: flash@e1000000 {
-				compatible = "arm,pl353-nand-r2p1"
-				reg = <0 0 0x1000000>;
-				(...)
-			};
-			nor0: flash@e2000000 {
-				compatible = "cfi-flash";
-				reg = <1 0 0x2000000>;
-			};
-			nor1: flash@e4000000 {
-				compatible = "cfi-flash";
-				reg = <2 0 0x2000000>;
-			};
+	smcc: memory-controller@e000e000 {
+		compatible = "arm,pl353-smc-r2p1", "arm,primecell";
+		clock-names = "memclk", "apb_pclk";
+		clocks = <&clkc 11>, <&clkc 44>;
+		reg = <0xe000e000 0x1000>;
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0xe1000000 0x1000000 /* Nand CS region */
+			  0x1 0x0 0xe2000000 0x2000000 /* SRAM/NOR CS0 region */
+			  0x2 0x0 0xe4000000 0x2000000>; /* SRAM/NOR CS1 region */
+
+		nand_0: flash@e1000000 {
+			compatible = "arm,pl353-nand-r2p1";
+			reg = <0 0 0x1000000>;
+		};
+
+		nor0: flash@e2000000 {
+			compatible = "cfi-flash";
+			reg = <1 0 0x2000000>;
+		};
+
+		nor1: flash@e4000000 {
+			compatible = "cfi-flash";
+			reg = <2 0 0x2000000>;
+		};
 	};
-- 
2.27.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 33+ messages in thread

* [PATCH v23 06/18] dt-binding: memory: pl353-smc: Drop unsupported nodes from the example
  2021-06-10  8:20 [PATCH v23 00/18] ARM Primecell PL35x support Miquel Raynal
                   ` (4 preceding siblings ...)
  2021-06-10  8:20 ` [PATCH v23 05/18] dt-binding: memory: pl353-smc: Fix the example syntax and style Miquel Raynal
@ 2021-06-10  8:20 ` Miquel Raynal
  2021-06-10  8:20 ` [PATCH v23 07/18] dt-binding: memory: pl353-smc: Fix the NAND controller node in " Miquel Raynal
                   ` (14 subsequent siblings)
  20 siblings, 0 replies; 33+ messages in thread
From: Miquel Raynal @ 2021-06-10  8:20 UTC (permalink / raw)
  To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus,
	linux-mtd, Rob Herring, devicetree, Krzysztof Kozlowski
  Cc: Michal Simek, Naga Sureshkumar Relli, Amit Kumar Mahapatra,
	Thomas Petazzoni, linux-arm-kernel, linux-kernel, helmut.grohne,
	Srinivas Goud, Siva Durga Prasad Paladugu, Miquel Raynal,
	Rob Herring

These nodes are given as examples and are not described nor used
anywhere else. There is also no hardware of my knowledge compatible with
these yet. If we want to be backward compatible, then we should avoid
partially describing nodes and their content while there are no users.
Plus, the examples are wrong (the addresses should be updated) so
let's drop them before converting this file to yaml (only the NAND node,
which will be fixed in the example and described somewhere else is
kept).

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/memory-controllers/pl353-smc.txt          | 10 ----------
 1 file changed, 10 deletions(-)

diff --git a/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
index 46e17f5bc45b..3ff6a4a49302 100644
--- a/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
@@ -39,14 +39,4 @@ Example:
 			compatible = "arm,pl353-nand-r2p1";
 			reg = <0 0 0x1000000>;
 		};
-
-		nor0: flash@e2000000 {
-			compatible = "cfi-flash";
-			reg = <1 0 0x2000000>;
-		};
-
-		nor1: flash@e4000000 {
-			compatible = "cfi-flash";
-			reg = <2 0 0x2000000>;
-		};
 	};
-- 
2.27.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 33+ messages in thread

* [PATCH v23 07/18] dt-binding: memory: pl353-smc: Fix the NAND controller node in the example
  2021-06-10  8:20 [PATCH v23 00/18] ARM Primecell PL35x support Miquel Raynal
                   ` (5 preceding siblings ...)
  2021-06-10  8:20 ` [PATCH v23 06/18] dt-binding: memory: pl353-smc: Drop unsupported nodes from the example Miquel Raynal
@ 2021-06-10  8:20 ` Miquel Raynal
  2021-06-10  8:20 ` [PATCH v23 08/18] dt-binding: memory: pl353-smc: Enhance the description of the reg property Miquel Raynal
                   ` (13 subsequent siblings)
  20 siblings, 0 replies; 33+ messages in thread
From: Miquel Raynal @ 2021-06-10  8:20 UTC (permalink / raw)
  To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus,
	linux-mtd, Rob Herring, devicetree, Krzysztof Kozlowski
  Cc: Michal Simek, Naga Sureshkumar Relli, Amit Kumar Mahapatra,
	Thomas Petazzoni, linux-arm-kernel, linux-kernel, helmut.grohne,
	Srinivas Goud, Siva Durga Prasad Paladugu, Miquel Raynal,
	Rob Herring

To be fully valid, the NAND controller node in the example should be
named nand-controller instead of flash, should be at the address @0,0
instead of @e1000000 and should have a couple of:
- #address-cells
- #size-cells
properties.

The label is being renamed nfc0 as well which is more usual than nand_0.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/memory-controllers/pl353-smc.txt      | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
index 3ff6a4a49302..ecd46856f139 100644
--- a/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
@@ -35,8 +35,10 @@ Example:
 			  0x1 0x0 0xe2000000 0x2000000 /* SRAM/NOR CS0 region */
 			  0x2 0x0 0xe4000000 0x2000000>; /* SRAM/NOR CS1 region */
 
-		nand_0: flash@e1000000 {
+		nfc0: nand-controller@0,0 {
 			compatible = "arm,pl353-nand-r2p1";
 			reg = <0 0 0x1000000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 	};
-- 
2.27.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 33+ messages in thread

* [PATCH v23 08/18] dt-binding: memory: pl353-smc: Enhance the description of the reg property
  2021-06-10  8:20 [PATCH v23 00/18] ARM Primecell PL35x support Miquel Raynal
                   ` (6 preceding siblings ...)
  2021-06-10  8:20 ` [PATCH v23 07/18] dt-binding: memory: pl353-smc: Fix the NAND controller node in " Miquel Raynal
@ 2021-06-10  8:20 ` Miquel Raynal
  2021-06-10 15:53   ` Rob Herring
  2021-06-10  8:20 ` [PATCH v23 09/18] dt-binding: memory: pl353-smc: Convert to yaml Miquel Raynal
                   ` (12 subsequent siblings)
  20 siblings, 1 reply; 33+ messages in thread
From: Miquel Raynal @ 2021-06-10  8:20 UTC (permalink / raw)
  To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus,
	linux-mtd, Rob Herring, devicetree, Krzysztof Kozlowski
  Cc: Michal Simek, Naga Sureshkumar Relli, Amit Kumar Mahapatra,
	Thomas Petazzoni, linux-arm-kernel, linux-kernel, helmut.grohne,
	Srinivas Goud, Siva Durga Prasad Paladugu, Miquel Raynal

The SMC bus controller features several register sets. The one pointed
by the reg property is for the SMC configuration (impacts the
sub-controllers configuration), while the others are meant to be used to
send regular cycles on the memory bus (eg. CMD, ADDR, DATA for a NAND
device). Detail this a little bit for the sake of clarity.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 .../devicetree/bindings/memory-controllers/pl353-smc.txt       | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
index ecd46856f139..ba6a5426f62b 100644
--- a/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
@@ -5,7 +5,8 @@ of memory interfaces: NAND and memory mapped interfaces (such as SRAM or NOR).
 
 Required properties:
 - compatible		: Should be "arm,pl353-smc-r2p1", "arm,primecell".
-- reg			: Controller registers map and length.
+- reg			: SMC controller and sub-controllers configuration
+			  registers.
 - clock-names		: List of input clock names - "memclk", "apb_pclk"
 			  (See clock bindings for details).
 - clocks		: Clock phandles (see clock bindings for details).
-- 
2.27.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 33+ messages in thread

* [PATCH v23 09/18] dt-binding: memory: pl353-smc: Convert to yaml
  2021-06-10  8:20 [PATCH v23 00/18] ARM Primecell PL35x support Miquel Raynal
                   ` (7 preceding siblings ...)
  2021-06-10  8:20 ` [PATCH v23 08/18] dt-binding: memory: pl353-smc: Enhance the description of the reg property Miquel Raynal
@ 2021-06-10  8:20 ` Miquel Raynal
  2021-06-10 15:44   ` Rob Herring
  2021-06-10  8:20 ` [PATCH v23 10/18] memory: pl353-smc: Fix style Miquel Raynal
                   ` (11 subsequent siblings)
  20 siblings, 1 reply; 33+ messages in thread
From: Miquel Raynal @ 2021-06-10  8:20 UTC (permalink / raw)
  To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus,
	linux-mtd, Rob Herring, devicetree, Krzysztof Kozlowski
  Cc: Michal Simek, Naga Sureshkumar Relli, Amit Kumar Mahapatra,
	Thomas Petazzoni, linux-arm-kernel, linux-kernel, helmut.grohne,
	Srinivas Goud, Siva Durga Prasad Paladugu, Miquel Raynal

Convert this binding file to yaml schema.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 .../memory-controllers/arm,pl353-smc.yaml     | 131 ++++++++++++++++++
 .../bindings/memory-controllers/pl353-smc.txt |  45 ------
 2 files changed, 131 insertions(+), 45 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/memory-controllers/arm,pl353-smc.yaml
 delete mode 100644 Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt

diff --git a/Documentation/devicetree/bindings/memory-controllers/arm,pl353-smc.yaml b/Documentation/devicetree/bindings/memory-controllers/arm,pl353-smc.yaml
new file mode 100644
index 000000000000..7a63c85ef8c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/arm,pl353-smc.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/arm,pl353-smc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM PL353 Static Memory Controller (SMC) device-tree bindings
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+  - Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
+
+description:
+  The PL353 Static Memory Controller is a bus where you can connect two kinds
+  of memory interfaces, which are NAND and memory mapped interfaces (such as
+  SRAM or NOR).
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,pl353-smc-r2p1
+  required:
+    - compatible
+
+properties:
+  $nodename:
+    pattern: "^memory-controller@[0-9a-f]+$"
+
+  compatible:
+    items:
+      - const: arm,pl353-smc-r2p1
+      - const: arm,primecell
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 1
+
+  reg:
+    items:
+      - description:
+          Configuration registers for the host and sub-controllers.
+          The three chip select regions are defined in 'ranges'.
+
+  clocks:
+    items:
+      - description: clock for the memory device bus
+      - description: main clock of the SMC
+
+  clock-names:
+    items:
+      - const: memclk
+      - const: apb_pclk
+
+  ranges:
+    minItems: 1
+    maxItems: 3
+    description: |
+      Memory bus areas for interacting with the devices. Reflects
+      the memory layout with four integer values following:
+      <cs-number> 0 <offset> <size>
+    items:
+      - description: NAND bank 0
+      - description: NOR/SRAM bank 0
+      - description: NOR/SRAM bank 1
+
+  interrupts: true
+
+patternProperties:
+  "@[0-3],[a-f0-9]+$":
+    type: object
+    description: |
+      The child device node represents the controller connected to the SMC
+      bus. The controller can be a NAND controller or a pair of any memory
+      mapped controllers such as NOR and SRAM controllers.
+
+    properties:
+      compatible:
+        description:
+          Compatible of memory controller.
+
+      reg:
+        items:
+          - items:
+              - description: |
+                  Chip-select ID, as in the parent range property.
+                minimum: 0
+                maximum: 2
+              - description: |
+                  Offset of the memory region requested by the device.
+              - description: |
+                  Length of the memory region requested by the device.
+
+    required:
+      - compatible
+      - reg
+
+required:
+  - compatible
+  - reg
+  - clock-names
+  - clocks
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    smcc: memory-controller@e000e000 {
+      compatible = "arm,pl353-smc-r2p1", "arm,primecell";
+      reg = <0xe000e000 0x0001000>;
+      clock-names = "memclk", "apb_pclk";
+      clocks = <&clkc 11>, <&clkc 44>;
+      ranges = <0x0 0x0 0xe1000000 0x1000000 /* Nand CS region */
+                0x1 0x0 0xe2000000 0x2000000 /* SRAM/NOR CS0 region */
+                0x2 0x0 0xe4000000 0x2000000>; /* SRAM/NOR CS1 region */
+      #address-cells = <2>;
+      #size-cells = <1>;
+
+      nfc0: nand-controller@0,0 {
+        compatible = "arm,pl353-nand-r2p1";
+        reg = <0 0 0x1000000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
deleted file mode 100644
index ba6a5426f62b..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-Device tree bindings for ARM PL353 static memory controller
-
-PL353 Static Memory Controller is a bus where you can connect two kinds
-of memory interfaces: NAND and memory mapped interfaces (such as SRAM or NOR).
-
-Required properties:
-- compatible		: Should be "arm,pl353-smc-r2p1", "arm,primecell".
-- reg			: SMC controller and sub-controllers configuration
-			  registers.
-- clock-names		: List of input clock names - "memclk", "apb_pclk"
-			  (See clock bindings for details).
-- clocks		: Clock phandles (see clock bindings for details).
-- address-cells		: Must be 2.
-- size-cells		: Must be 1.
-- ranges		: Memory bus areas for interacting with the devices.
-			  Encodes CS to memory region association.
-
-The child device node represents the controller connected to the SMC
-bus. Only one between: NAND controller, NOR controller and SRAM controller
-is allowed in a single system.
-
-Required device node properties:
-
-- reg:			Contains the chip-select id, the offset and the length
-			of the memory region requested by the device.
-
-Example:
-	smcc: memory-controller@e000e000 {
-		compatible = "arm,pl353-smc-r2p1", "arm,primecell";
-		clock-names = "memclk", "apb_pclk";
-		clocks = <&clkc 11>, <&clkc 44>;
-		reg = <0xe000e000 0x1000>;
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0x0 0x0 0xe1000000 0x1000000 /* Nand CS region */
-			  0x1 0x0 0xe2000000 0x2000000 /* SRAM/NOR CS0 region */
-			  0x2 0x0 0xe4000000 0x2000000>; /* SRAM/NOR CS1 region */
-
-		nfc0: nand-controller@0,0 {
-			compatible = "arm,pl353-nand-r2p1";
-			reg = <0 0 0x1000000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-- 
2.27.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 33+ messages in thread

* [PATCH v23 10/18] memory: pl353-smc: Fix style
  2021-06-10  8:20 [PATCH v23 00/18] ARM Primecell PL35x support Miquel Raynal
                   ` (8 preceding siblings ...)
  2021-06-10  8:20 ` [PATCH v23 09/18] dt-binding: memory: pl353-smc: Convert to yaml Miquel Raynal
@ 2021-06-10  8:20 ` Miquel Raynal
  2021-06-10  8:20 ` [PATCH v23 11/18] memory: pl353-smc: Rename goto labels Miquel Raynal
                   ` (10 subsequent siblings)
  20 siblings, 0 replies; 33+ messages in thread
From: Miquel Raynal @ 2021-06-10  8:20 UTC (permalink / raw)
  To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus,
	linux-mtd, Rob Herring, devicetree, Krzysztof Kozlowski
  Cc: Michal Simek, Naga Sureshkumar Relli, Amit Kumar Mahapatra,
	Thomas Petazzoni, linux-arm-kernel, linux-kernel, helmut.grohne,
	Srinivas Goud, Siva Durga Prasad Paladugu, Miquel Raynal

Use proper spacing.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 drivers/memory/pl353-smc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/memory/pl353-smc.c b/drivers/memory/pl353-smc.c
index 9c0a28416777..2d20b1b2c0e3 100644
--- a/drivers/memory/pl353-smc.c
+++ b/drivers/memory/pl353-smc.c
@@ -436,8 +436,8 @@ static void pl353_smc_remove(struct amba_device *adev)
 
 static const struct amba_id pl353_ids[] = {
 	{
-	.id = 0x00041353,
-	.mask = 0x000fffff,
+		.id = 0x00041353,
+		.mask = 0x000fffff,
 	},
 	{ 0, 0 },
 };
-- 
2.27.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 33+ messages in thread

* [PATCH v23 11/18] memory: pl353-smc: Rename goto labels
  2021-06-10  8:20 [PATCH v23 00/18] ARM Primecell PL35x support Miquel Raynal
                   ` (9 preceding siblings ...)
  2021-06-10  8:20 ` [PATCH v23 10/18] memory: pl353-smc: Fix style Miquel Raynal
@ 2021-06-10  8:20 ` Miquel Raynal
  2021-06-10  8:20 ` [PATCH v23 12/18] memory: pl353-smc: Let lower level controller drivers handle inits Miquel Raynal
                   ` (9 subsequent siblings)
  20 siblings, 0 replies; 33+ messages in thread
From: Miquel Raynal @ 2021-06-10  8:20 UTC (permalink / raw)
  To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus,
	linux-mtd, Rob Herring, devicetree, Krzysztof Kozlowski
  Cc: Michal Simek, Naga Sureshkumar Relli, Amit Kumar Mahapatra,
	Thomas Petazzoni, linux-arm-kernel, linux-kernel, helmut.grohne,
	Srinivas Goud, Siva Durga Prasad Paladugu, Miquel Raynal

A goto label is better named

        do_something:

than

        out_something_to_do:

Use the former wording and really describe what the jump involves.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 drivers/memory/pl353-smc.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/memory/pl353-smc.c b/drivers/memory/pl353-smc.c
index 2d20b1b2c0e3..14720430bf9e 100644
--- a/drivers/memory/pl353-smc.c
+++ b/drivers/memory/pl353-smc.c
@@ -388,7 +388,7 @@ static int pl353_smc_probe(struct amba_device *adev, const struct amba_id *id)
 	err = clk_prepare_enable(pl353_smc->memclk);
 	if (err) {
 		dev_err(&adev->dev, "Unable to enable memory clock.\n");
-		goto out_clk_dis_aper;
+		goto disable_axi_clk;
 	}
 
 	amba_set_drvdata(adev, pl353_smc);
@@ -408,7 +408,7 @@ static int pl353_smc_probe(struct amba_device *adev, const struct amba_id *id)
 	}
 	if (!match) {
 		dev_err(&adev->dev, "no matching children\n");
-		goto out_clk_disable;
+		goto disable_mem_clk;
 	}
 
 	init = match->data;
@@ -418,9 +418,9 @@ static int pl353_smc_probe(struct amba_device *adev, const struct amba_id *id)
 
 	return 0;
 
-out_clk_disable:
+disable_mem_clk:
 	clk_disable_unprepare(pl353_smc->memclk);
-out_clk_dis_aper:
+disable_axi_clk:
 	clk_disable_unprepare(pl353_smc->aclk);
 
 	return err;
-- 
2.27.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 33+ messages in thread

* [PATCH v23 12/18] memory: pl353-smc: Let lower level controller drivers handle inits
  2021-06-10  8:20 [PATCH v23 00/18] ARM Primecell PL35x support Miquel Raynal
                   ` (10 preceding siblings ...)
  2021-06-10  8:20 ` [PATCH v23 11/18] memory: pl353-smc: Rename goto labels Miquel Raynal
@ 2021-06-10  8:20 ` Miquel Raynal
  2021-06-10  8:20 ` [PATCH v23 13/18] memory: pl353-smc: Avoid useless acronyms in descriptions Miquel Raynal
                   ` (8 subsequent siblings)
  20 siblings, 0 replies; 33+ messages in thread
From: Miquel Raynal @ 2021-06-10  8:20 UTC (permalink / raw)
  To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus,
	linux-mtd, Rob Herring, devicetree, Krzysztof Kozlowski
  Cc: Michal Simek, Naga Sureshkumar Relli, Amit Kumar Mahapatra,
	Thomas Petazzoni, linux-arm-kernel, linux-kernel, helmut.grohne,
	Srinivas Goud, Siva Durga Prasad Paladugu, Miquel Raynal

There is no point in having all these definitions at the SMC bus level,
these are extremely tight to the NAND controller driver implementation,
are not particularly generic, imply more boilerplate than needed, do
not really follow the device model by receiving no argument and some of
them are actually buggy.

Let's get rid of these right now as there is no current user and keep
this driver at a simple level: only the SMC bare initializations.

The NAND controller driver which I am going to introduce will take care
of redefining properly all these helpers and using them directly.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 drivers/memory/pl353-smc.c | 294 -------------------------------------
 include/linux/pl353-smc.h  |  30 ----
 2 files changed, 324 deletions(-)
 delete mode 100644 include/linux/pl353-smc.h

diff --git a/drivers/memory/pl353-smc.c b/drivers/memory/pl353-smc.c
index 14720430bf9e..5b57926461a0 100644
--- a/drivers/memory/pl353-smc.c
+++ b/drivers/memory/pl353-smc.c
@@ -8,76 +8,12 @@
  */
 
 #include <linux/clk.h>
-#include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/pl353-smc.h>
 #include <linux/amba/bus.h>
 
-/* Register definitions */
-#define PL353_SMC_MEMC_STATUS_OFFS	0	/* Controller status reg, RO */
-#define PL353_SMC_CFG_CLR_OFFS		0xC	/* Clear config reg, WO */
-#define PL353_SMC_DIRECT_CMD_OFFS	0x10	/* Direct command reg, WO */
-#define PL353_SMC_SET_CYCLES_OFFS	0x14	/* Set cycles register, WO */
-#define PL353_SMC_SET_OPMODE_OFFS	0x18	/* Set opmode register, WO */
-#define PL353_SMC_ECC_STATUS_OFFS	0x400	/* ECC status register */
-#define PL353_SMC_ECC_MEMCFG_OFFS	0x404	/* ECC mem config reg */
-#define PL353_SMC_ECC_MEMCMD1_OFFS	0x408	/* ECC mem cmd1 reg */
-#define PL353_SMC_ECC_MEMCMD2_OFFS	0x40C	/* ECC mem cmd2 reg */
-#define PL353_SMC_ECC_VALUE0_OFFS	0x418	/* ECC value 0 reg */
-
-/* Controller status register specific constants */
-#define PL353_SMC_MEMC_STATUS_RAW_INT_1_SHIFT	6
-
-/* Clear configuration register specific constants */
-#define PL353_SMC_CFG_CLR_INT_CLR_1	0x10
-#define PL353_SMC_CFG_CLR_ECC_INT_DIS_1	0x40
-#define PL353_SMC_CFG_CLR_INT_DIS_1	0x2
-#define PL353_SMC_CFG_CLR_DEFAULT_MASK	(PL353_SMC_CFG_CLR_INT_CLR_1 | \
-					 PL353_SMC_CFG_CLR_ECC_INT_DIS_1 | \
-					 PL353_SMC_CFG_CLR_INT_DIS_1)
-
-/* Set cycles register specific constants */
-#define PL353_SMC_SET_CYCLES_T0_MASK	0xF
-#define PL353_SMC_SET_CYCLES_T0_SHIFT	0
-#define PL353_SMC_SET_CYCLES_T1_MASK	0xF
-#define PL353_SMC_SET_CYCLES_T1_SHIFT	4
-#define PL353_SMC_SET_CYCLES_T2_MASK	0x7
-#define PL353_SMC_SET_CYCLES_T2_SHIFT	8
-#define PL353_SMC_SET_CYCLES_T3_MASK	0x7
-#define PL353_SMC_SET_CYCLES_T3_SHIFT	11
-#define PL353_SMC_SET_CYCLES_T4_MASK	0x7
-#define PL353_SMC_SET_CYCLES_T4_SHIFT	14
-#define PL353_SMC_SET_CYCLES_T5_MASK	0x7
-#define PL353_SMC_SET_CYCLES_T5_SHIFT	17
-#define PL353_SMC_SET_CYCLES_T6_MASK	0xF
-#define PL353_SMC_SET_CYCLES_T6_SHIFT	20
-
-/* ECC status register specific constants */
-#define PL353_SMC_ECC_STATUS_BUSY	BIT(6)
-#define PL353_SMC_ECC_REG_SIZE_OFFS	4
-
-/* ECC memory config register specific constants */
-#define PL353_SMC_ECC_MEMCFG_MODE_MASK	0xC
-#define PL353_SMC_ECC_MEMCFG_MODE_SHIFT	2
-#define PL353_SMC_ECC_MEMCFG_PGSIZE_MASK	0x3
-
-#define PL353_SMC_DC_UPT_NAND_REGS	((4 << 23) |	/* CS: NAND chip */ \
-				 (2 << 21))	/* UpdateRegs operation */
-
-#define PL353_NAND_ECC_CMD1	((0x80)       |	/* Write command */ \
-				 (0 << 8)     |	/* Read command */ \
-				 (0x30 << 16) |	/* Read End command */ \
-				 (1 << 24))	/* Read End command calid */
-
-#define PL353_NAND_ECC_CMD2	((0x85)	      |	/* Write col change cmd */ \
-				 (5 << 8)     |	/* Read col change cmd */ \
-				 (0xE0 << 16) |	/* Read col change end cmd */ \
-				 (1 << 24)) /* Read col change end cmd valid */
-#define PL353_NAND_ECC_BUSY_TIMEOUT	(1 * HZ)
 /**
  * struct pl353_smc_data - Private smc driver structure
  * @memclk:		Pointer to the peripheral clock
@@ -88,183 +24,6 @@ struct pl353_smc_data {
 	struct clk		*aclk;
 };
 
-/* SMC virtual register base */
-static void __iomem *pl353_smc_base;
-
-/**
- * pl353_smc_set_buswidth - Set memory buswidth
- * @bw: Memory buswidth (8 | 16)
- * Return: 0 on success or negative errno.
- */
-int pl353_smc_set_buswidth(unsigned int bw)
-{
-	if (bw != PL353_SMC_MEM_WIDTH_8  && bw != PL353_SMC_MEM_WIDTH_16)
-		return -EINVAL;
-
-	writel(bw, pl353_smc_base + PL353_SMC_SET_OPMODE_OFFS);
-	writel(PL353_SMC_DC_UPT_NAND_REGS, pl353_smc_base +
-	       PL353_SMC_DIRECT_CMD_OFFS);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(pl353_smc_set_buswidth);
-
-/**
- * pl353_smc_set_cycles - Set memory timing parameters
- * @timings: NAND controller timing parameters
- *
- * Sets NAND chip specific timing parameters.
- */
-void pl353_smc_set_cycles(u32 timings[])
-{
-	/*
-	 * Set write pulse timing. This one is easy to extract:
-	 *
-	 * NWE_PULSE = tWP
-	 */
-	timings[0] &= PL353_SMC_SET_CYCLES_T0_MASK;
-	timings[1] = (timings[1] & PL353_SMC_SET_CYCLES_T1_MASK) <<
-			PL353_SMC_SET_CYCLES_T1_SHIFT;
-	timings[2] = (timings[2]  & PL353_SMC_SET_CYCLES_T2_MASK) <<
-			PL353_SMC_SET_CYCLES_T2_SHIFT;
-	timings[3] = (timings[3]  & PL353_SMC_SET_CYCLES_T3_MASK) <<
-			PL353_SMC_SET_CYCLES_T3_SHIFT;
-	timings[4] = (timings[4] & PL353_SMC_SET_CYCLES_T4_MASK) <<
-			PL353_SMC_SET_CYCLES_T4_SHIFT;
-	timings[5]  = (timings[5]  & PL353_SMC_SET_CYCLES_T5_MASK) <<
-			PL353_SMC_SET_CYCLES_T5_SHIFT;
-	timings[6]  = (timings[6]  & PL353_SMC_SET_CYCLES_T6_MASK) <<
-			PL353_SMC_SET_CYCLES_T6_SHIFT;
-	timings[0] |= timings[1] | timings[2] | timings[3] |
-			timings[4] | timings[5] | timings[6];
-
-	writel(timings[0], pl353_smc_base + PL353_SMC_SET_CYCLES_OFFS);
-	writel(PL353_SMC_DC_UPT_NAND_REGS, pl353_smc_base +
-	       PL353_SMC_DIRECT_CMD_OFFS);
-}
-EXPORT_SYMBOL_GPL(pl353_smc_set_cycles);
-
-/**
- * pl353_smc_ecc_is_busy - Read ecc busy flag
- * Return: the ecc_status bit from the ecc_status register. 1 = busy, 0 = idle
- */
-bool pl353_smc_ecc_is_busy(void)
-{
-	return ((readl(pl353_smc_base + PL353_SMC_ECC_STATUS_OFFS) &
-		  PL353_SMC_ECC_STATUS_BUSY) == PL353_SMC_ECC_STATUS_BUSY);
-}
-EXPORT_SYMBOL_GPL(pl353_smc_ecc_is_busy);
-
-/**
- * pl353_smc_get_ecc_val - Read ecc_valueN registers
- * @ecc_reg: Index of the ecc_value reg (0..3)
- * Return: the content of the requested ecc_value register.
- *
- * There are four valid ecc_value registers. The argument is truncated to stay
- * within this valid boundary.
- */
-u32 pl353_smc_get_ecc_val(int ecc_reg)
-{
-	u32 addr, reg;
-
-	addr = PL353_SMC_ECC_VALUE0_OFFS +
-		(ecc_reg * PL353_SMC_ECC_REG_SIZE_OFFS);
-	reg = readl(pl353_smc_base + addr);
-
-	return reg;
-}
-EXPORT_SYMBOL_GPL(pl353_smc_get_ecc_val);
-
-/**
- * pl353_smc_get_nand_int_status_raw - Get NAND interrupt status bit
- * Return: the raw_int_status1 bit from the memc_status register
- */
-int pl353_smc_get_nand_int_status_raw(void)
-{
-	u32 reg;
-
-	reg = readl(pl353_smc_base + PL353_SMC_MEMC_STATUS_OFFS);
-	reg >>= PL353_SMC_MEMC_STATUS_RAW_INT_1_SHIFT;
-	reg &= 1;
-
-	return reg;
-}
-EXPORT_SYMBOL_GPL(pl353_smc_get_nand_int_status_raw);
-
-/**
- * pl353_smc_clr_nand_int - Clear NAND interrupt
- */
-void pl353_smc_clr_nand_int(void)
-{
-	writel(PL353_SMC_CFG_CLR_INT_CLR_1,
-	       pl353_smc_base + PL353_SMC_CFG_CLR_OFFS);
-}
-EXPORT_SYMBOL_GPL(pl353_smc_clr_nand_int);
-
-/**
- * pl353_smc_set_ecc_mode - Set SMC ECC mode
- * @mode: ECC mode (BYPASS, APB, MEM)
- * Return: 0 on success or negative errno.
- */
-int pl353_smc_set_ecc_mode(enum pl353_smc_ecc_mode mode)
-{
-	u32 reg;
-	int ret = 0;
-
-	switch (mode) {
-	case PL353_SMC_ECCMODE_BYPASS:
-	case PL353_SMC_ECCMODE_APB:
-	case PL353_SMC_ECCMODE_MEM:
-
-		reg = readl(pl353_smc_base + PL353_SMC_ECC_MEMCFG_OFFS);
-		reg &= ~PL353_SMC_ECC_MEMCFG_MODE_MASK;
-		reg |= mode << PL353_SMC_ECC_MEMCFG_MODE_SHIFT;
-		writel(reg, pl353_smc_base + PL353_SMC_ECC_MEMCFG_OFFS);
-
-		break;
-	default:
-		ret = -EINVAL;
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(pl353_smc_set_ecc_mode);
-
-/**
- * pl353_smc_set_ecc_pg_size - Set SMC ECC page size
- * @pg_sz: ECC page size
- * Return: 0 on success or negative errno.
- */
-int pl353_smc_set_ecc_pg_size(unsigned int pg_sz)
-{
-	u32 reg, sz;
-
-	switch (pg_sz) {
-	case 0:
-		sz = 0;
-		break;
-	case SZ_512:
-		sz = 1;
-		break;
-	case SZ_1K:
-		sz = 2;
-		break;
-	case SZ_2K:
-		sz = 3;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	reg = readl(pl353_smc_base + PL353_SMC_ECC_MEMCFG_OFFS);
-	reg &= ~PL353_SMC_ECC_MEMCFG_PGSIZE_MASK;
-	reg |= sz;
-	writel(reg, pl353_smc_base + PL353_SMC_ECC_MEMCFG_OFFS);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(pl353_smc_set_ecc_pg_size);
-
 static int __maybe_unused pl353_smc_suspend(struct device *dev)
 {
 	struct pl353_smc_data *pl353_smc = dev_get_drvdata(dev);
@@ -296,52 +55,15 @@ static int __maybe_unused pl353_smc_resume(struct device *dev)
 	return ret;
 }
 
-static struct amba_driver pl353_smc_driver;
-
 static SIMPLE_DEV_PM_OPS(pl353_smc_dev_pm_ops, pl353_smc_suspend,
 			 pl353_smc_resume);
 
-/**
- * pl353_smc_init_nand_interface - Initialize the NAND interface
- * @adev: Pointer to the amba_device struct
- * @nand_node: Pointer to the pl353_nand device_node struct
- */
-static void pl353_smc_init_nand_interface(struct amba_device *adev,
-					  struct device_node *nand_node)
-{
-	unsigned long timeout;
-
-	pl353_smc_set_buswidth(PL353_SMC_MEM_WIDTH_8);
-	writel(PL353_SMC_CFG_CLR_INT_CLR_1,
-	       pl353_smc_base + PL353_SMC_CFG_CLR_OFFS);
-	writel(PL353_SMC_DC_UPT_NAND_REGS, pl353_smc_base +
-	       PL353_SMC_DIRECT_CMD_OFFS);
-
-	timeout = jiffies + PL353_NAND_ECC_BUSY_TIMEOUT;
-	/* Wait till the ECC operation is complete */
-	do {
-		if (pl353_smc_ecc_is_busy())
-			cpu_relax();
-		else
-			break;
-	} while (!time_after_eq(jiffies, timeout));
-
-	if (time_after_eq(jiffies, timeout))
-		return;
-
-	writel(PL353_NAND_ECC_CMD1,
-	       pl353_smc_base + PL353_SMC_ECC_MEMCMD1_OFFS);
-	writel(PL353_NAND_ECC_CMD2,
-	       pl353_smc_base + PL353_SMC_ECC_MEMCMD2_OFFS);
-}
-
 static const struct of_device_id pl353_smc_supported_children[] = {
 	{
 		.compatible = "cfi-flash"
 	},
 	{
 		.compatible = "arm,pl353-nand-r2p1",
-		.data = pl353_smc_init_nand_interface
 	},
 	{}
 };
@@ -350,23 +72,14 @@ static int pl353_smc_probe(struct amba_device *adev, const struct amba_id *id)
 {
 	struct pl353_smc_data *pl353_smc;
 	struct device_node *child;
-	struct resource *res;
 	int err;
 	struct device_node *of_node = adev->dev.of_node;
-	static void (*init)(struct amba_device *adev,
-			    struct device_node *nand_node);
 	const struct of_device_id *match = NULL;
 
 	pl353_smc = devm_kzalloc(&adev->dev, sizeof(*pl353_smc), GFP_KERNEL);
 	if (!pl353_smc)
 		return -ENOMEM;
 
-	/* Get the NAND controller virtual address */
-	res = &adev->res;
-	pl353_smc_base = devm_ioremap_resource(&adev->dev, res);
-	if (IS_ERR(pl353_smc_base))
-		return PTR_ERR(pl353_smc_base);
-
 	pl353_smc->aclk = devm_clk_get(&adev->dev, "apb_pclk");
 	if (IS_ERR(pl353_smc->aclk)) {
 		dev_err(&adev->dev, "aclk clock not found.\n");
@@ -393,10 +106,6 @@ static int pl353_smc_probe(struct amba_device *adev, const struct amba_id *id)
 
 	amba_set_drvdata(adev, pl353_smc);
 
-	/* clear interrupts */
-	writel(PL353_SMC_CFG_CLR_DEFAULT_MASK,
-	       pl353_smc_base + PL353_SMC_CFG_CLR_OFFS);
-
 	/* Find compatible children. Only a single child is supported */
 	for_each_available_child_of_node(of_node, child) {
 		match = of_match_node(pl353_smc_supported_children, child);
@@ -411,9 +120,6 @@ static int pl353_smc_probe(struct amba_device *adev, const struct amba_id *id)
 		goto disable_mem_clk;
 	}
 
-	init = match->data;
-	if (init)
-		init(adev, child);
 	of_platform_device_create(child, NULL, &adev->dev);
 
 	return 0;
diff --git a/include/linux/pl353-smc.h b/include/linux/pl353-smc.h
deleted file mode 100644
index 0e0d3df9bf72..000000000000
--- a/include/linux/pl353-smc.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * ARM PL353 SMC Driver Header
- *
- * Copyright (C) 2012 - 2018 Xilinx, Inc
- */
-
-#ifndef __LINUX_PL353_SMC_H
-#define __LINUX_PL353_SMC_H
-
-enum pl353_smc_ecc_mode {
-	PL353_SMC_ECCMODE_BYPASS = 0,
-	PL353_SMC_ECCMODE_APB = 1,
-	PL353_SMC_ECCMODE_MEM = 2
-};
-
-enum pl353_smc_mem_width {
-	PL353_SMC_MEM_WIDTH_8 = 0,
-	PL353_SMC_MEM_WIDTH_16 = 1
-};
-
-u32 pl353_smc_get_ecc_val(int ecc_reg);
-bool pl353_smc_ecc_is_busy(void);
-int pl353_smc_get_nand_int_status_raw(void);
-void pl353_smc_clr_nand_int(void);
-int pl353_smc_set_ecc_mode(enum pl353_smc_ecc_mode mode);
-int pl353_smc_set_ecc_pg_size(unsigned int pg_sz);
-int pl353_smc_set_buswidth(unsigned int bw);
-void pl353_smc_set_cycles(u32 timings[]);
-#endif
-- 
2.27.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 33+ messages in thread

* [PATCH v23 13/18] memory: pl353-smc: Avoid useless acronyms in descriptions
  2021-06-10  8:20 [PATCH v23 00/18] ARM Primecell PL35x support Miquel Raynal
                   ` (11 preceding siblings ...)
  2021-06-10  8:20 ` [PATCH v23 12/18] memory: pl353-smc: Let lower level controller drivers handle inits Miquel Raynal
@ 2021-06-10  8:20 ` Miquel Raynal
  2021-06-10  8:20 ` [PATCH v23 14/18] memory: pl353-smc: Declare variables following a reverse christmas tree order Miquel Raynal
                   ` (7 subsequent siblings)
  20 siblings, 0 replies; 33+ messages in thread
From: Miquel Raynal @ 2021-06-10  8:20 UTC (permalink / raw)
  To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus,
	linux-mtd, Rob Herring, devicetree, Krzysztof Kozlowski
  Cc: Michal Simek, Naga Sureshkumar Relli, Amit Kumar Mahapatra,
	Thomas Petazzoni, linux-arm-kernel, linux-kernel, helmut.grohne,
	Srinivas Goud, Siva Durga Prasad Paladugu, Miquel Raynal

APER does not mean anything, while it seems legitimate to call this
clock the AXI peripheral clock.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 drivers/memory/pl353-smc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/memory/pl353-smc.c b/drivers/memory/pl353-smc.c
index 5b57926461a0..b913d68a7a41 100644
--- a/drivers/memory/pl353-smc.c
+++ b/drivers/memory/pl353-smc.c
@@ -17,7 +17,7 @@
 /**
  * struct pl353_smc_data - Private smc driver structure
  * @memclk:		Pointer to the peripheral clock
- * @aclk:		Pointer to the APER clock
+ * @aclk:		Pointer to the AXI peripheral clock
  */
 struct pl353_smc_data {
 	struct clk		*memclk;
-- 
2.27.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 33+ messages in thread

* [PATCH v23 14/18] memory: pl353-smc: Declare variables following a reverse christmas tree order
  2021-06-10  8:20 [PATCH v23 00/18] ARM Primecell PL35x support Miquel Raynal
                   ` (12 preceding siblings ...)
  2021-06-10  8:20 ` [PATCH v23 13/18] memory: pl353-smc: Avoid useless acronyms in descriptions Miquel Raynal
@ 2021-06-10  8:20 ` Miquel Raynal
  2021-06-10  8:20 ` [PATCH v23 15/18] MAINTAINERS: Add PL353 SMC entry Miquel Raynal
                   ` (6 subsequent siblings)
  20 siblings, 0 replies; 33+ messages in thread
From: Miquel Raynal @ 2021-06-10  8:20 UTC (permalink / raw)
  To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus,
	linux-mtd, Rob Herring, devicetree, Krzysztof Kozlowski
  Cc: Michal Simek, Naga Sureshkumar Relli, Amit Kumar Mahapatra,
	Thomas Petazzoni, linux-arm-kernel, linux-kernel, helmut.grohne,
	Srinivas Goud, Siva Durga Prasad Paladugu, Miquel Raynal

This is a purely cosmetic change.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 drivers/memory/pl353-smc.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/memory/pl353-smc.c b/drivers/memory/pl353-smc.c
index b913d68a7a41..925d856663ac 100644
--- a/drivers/memory/pl353-smc.c
+++ b/drivers/memory/pl353-smc.c
@@ -36,8 +36,8 @@ static int __maybe_unused pl353_smc_suspend(struct device *dev)
 
 static int __maybe_unused pl353_smc_resume(struct device *dev)
 {
+	struct pl353_smc_data *pl353_smc = dev_get_drvdata(dev);
 	int ret;
-	struct pl353_smc_data *pl353_smc = dev_get_drvdata(dev);
 
 	ret = clk_enable(pl353_smc->aclk);
 	if (ret) {
@@ -70,11 +70,11 @@ static const struct of_device_id pl353_smc_supported_children[] = {
 
 static int pl353_smc_probe(struct amba_device *adev, const struct amba_id *id)
 {
+	struct device_node *of_node = adev->dev.of_node;
+	const struct of_device_id *match = NULL;
 	struct pl353_smc_data *pl353_smc;
 	struct device_node *child;
 	int err;
-	struct device_node *of_node = adev->dev.of_node;
-	const struct of_device_id *match = NULL;
 
 	pl353_smc = devm_kzalloc(&adev->dev, sizeof(*pl353_smc), GFP_KERNEL);
 	if (!pl353_smc)
-- 
2.27.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 33+ messages in thread

* [PATCH v23 15/18] MAINTAINERS: Add PL353 SMC entry
  2021-06-10  8:20 [PATCH v23 00/18] ARM Primecell PL35x support Miquel Raynal
                   ` (13 preceding siblings ...)
  2021-06-10  8:20 ` [PATCH v23 14/18] memory: pl353-smc: Declare variables following a reverse christmas tree order Miquel Raynal
@ 2021-06-10  8:20 ` Miquel Raynal
  2021-06-10  8:20 ` [PATCH v23 16/18] MAINTAINERS: Add PL353 NAND controller entry Miquel Raynal
                   ` (5 subsequent siblings)
  20 siblings, 0 replies; 33+ messages in thread
From: Miquel Raynal @ 2021-06-10  8:20 UTC (permalink / raw)
  To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus,
	linux-mtd, Rob Herring, devicetree, Krzysztof Kozlowski
  Cc: Michal Simek, Naga Sureshkumar Relli, Amit Kumar Mahapatra,
	Thomas Petazzoni, linux-arm-kernel, linux-kernel, helmut.grohne,
	Srinivas Goud, Siva Durga Prasad Paladugu, Miquel Raynal,
	Naga Sureshkumar Relli

Add Naga from Xilinx and myself responsible of this driver.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
---
 MAINTAINERS | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index bd7aff0c120f..b4315b76645a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1452,6 +1452,14 @@ S:	Odd Fixes
 F:	drivers/amba/
 F:	include/linux/amba/bus.h
 
+ARM PRIMECELL PL35X SMC DRIVER
+M:	Miquel Raynal <miquel.raynal@bootlin.com@bootlin.com>
+M:	Naga Sureshkumar Relli <nagasure@xilinx.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	Documentation/devicetree/bindings/mtd/arm,pl353-smc.yaml
+F:	drivers/memory/pl353-smc.c
+
 ARM PRIMECELL CLCD PL110 DRIVER
 M:	Russell King <linux@armlinux.org.uk>
 S:	Odd Fixes
-- 
2.27.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 33+ messages in thread

* [PATCH v23 16/18] MAINTAINERS: Add PL353 NAND controller entry
  2021-06-10  8:20 [PATCH v23 00/18] ARM Primecell PL35x support Miquel Raynal
                   ` (14 preceding siblings ...)
  2021-06-10  8:20 ` [PATCH v23 15/18] MAINTAINERS: Add PL353 SMC entry Miquel Raynal
@ 2021-06-10  8:20 ` Miquel Raynal
  2021-06-11 19:02   ` Miquel Raynal
  2021-06-10  8:20 ` [PATCH v23 17/18] dt-bindings: mtd: pl353-nand: Describe this hardware controller Miquel Raynal
                   ` (4 subsequent siblings)
  20 siblings, 1 reply; 33+ messages in thread
From: Miquel Raynal @ 2021-06-10  8:20 UTC (permalink / raw)
  To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus,
	linux-mtd, Rob Herring, devicetree, Krzysztof Kozlowski
  Cc: Michal Simek, Naga Sureshkumar Relli, Amit Kumar Mahapatra,
	Thomas Petazzoni, linux-arm-kernel, linux-kernel, helmut.grohne,
	Srinivas Goud, Siva Durga Prasad Paladugu, Miquel Raynal,
	Naga Sureshkumar Relli

Add Naga from Xilinx and myself responsible of this driver.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
---
 MAINTAINERS | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index b4315b76645a..a36fb919e913 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1452,6 +1452,14 @@ S:	Odd Fixes
 F:	drivers/amba/
 F:	include/linux/amba/bus.h
 
+ARM PRIMECELL PL35X NAND CONTROLLER DRIVER
+M:	Miquel Raynal <miquel.raynal@bootlin.com@bootlin.com>
+M:	Naga Sureshkumar Relli <nagasure@xilinx.com>
+L:	linux-mtd@lists.infradead.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.yaml
+F:	drivers/mtd/nand/raw/pl35x-nand-controller.c
+
 ARM PRIMECELL PL35X SMC DRIVER
 M:	Miquel Raynal <miquel.raynal@bootlin.com@bootlin.com>
 M:	Naga Sureshkumar Relli <nagasure@xilinx.com>
-- 
2.27.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 33+ messages in thread

* [PATCH v23 17/18] dt-bindings: mtd: pl353-nand: Describe this hardware controller
  2021-06-10  8:20 [PATCH v23 00/18] ARM Primecell PL35x support Miquel Raynal
                   ` (15 preceding siblings ...)
  2021-06-10  8:20 ` [PATCH v23 16/18] MAINTAINERS: Add PL353 NAND controller entry Miquel Raynal
@ 2021-06-10  8:20 ` Miquel Raynal
  2021-06-10  8:48   ` Krzysztof Kozlowski
                     ` (2 more replies)
  2021-06-10  8:20 ` [PATCH v23 18/18] mtd: rawnand: pl353: Add support for the ARM PL353 SMC NAND controller Miquel Raynal
                   ` (3 subsequent siblings)
  20 siblings, 3 replies; 33+ messages in thread
From: Miquel Raynal @ 2021-06-10  8:20 UTC (permalink / raw)
  To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus,
	linux-mtd, Rob Herring, devicetree, Krzysztof Kozlowski
  Cc: Michal Simek, Naga Sureshkumar Relli, Amit Kumar Mahapatra,
	Thomas Petazzoni, linux-arm-kernel, linux-kernel, helmut.grohne,
	Srinivas Goud, Siva Durga Prasad Paladugu, Miquel Raynal

Add a yaml description of this NAND controller which is described as a
subnode of the SMC bus.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 .../bindings/mtd/arm,pl353-nand-r2p1.yaml     | 53 +++++++++++++++++++
 1 file changed, 53 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.yaml

diff --git a/Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.yaml b/Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.yaml
new file mode 100644
index 000000000000..5f126bb9b202
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/arm,pl353-nand-r2p1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PL353 NAND Controller device tree bindings
+
+allOf:
+  - $ref: "nand-controller.yaml"
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+  - Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
+
+properties:
+  compatible:
+    items:
+      - const: arm,pl353-nand-r2p1
+
+  reg:
+    items:
+      - items:
+          - description: CS with regard to the parent ranges property
+          - description: Offset of the memory region requested by the device
+          - description: Length of the memory region requested by the device
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    smcc: memory-controller@e000e000 {
+      compatible = "arm,pl353-smc-r2p1", "arm,primecell";
+      reg = <0xe000e000 0x0001000>;
+      clock-names = "memclk", "apb_pclk";
+      clocks = <&clkc 11>, <&clkc 44>;
+      ranges = <0x0 0x0 0xe1000000 0x1000000 /* Nand CS region */
+                0x1 0x0 0xe2000000 0x2000000 /* SRAM/NOR CS0 region */
+                0x2 0x0 0xe4000000 0x2000000>; /* SRAM/NOR CS1 region */
+      #address-cells = <2>;
+      #size-cells = <1>;
+
+      nfc0: nand-controller@0,0 {
+        compatible = "arm,pl353-nand-r2p1";
+        reg = <0 0 0x1000000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+      };
+    };
-- 
2.27.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 33+ messages in thread

* [PATCH v23 18/18] mtd: rawnand: pl353: Add support for the ARM PL353 SMC NAND controller
  2021-06-10  8:20 [PATCH v23 00/18] ARM Primecell PL35x support Miquel Raynal
                   ` (16 preceding siblings ...)
  2021-06-10  8:20 ` [PATCH v23 17/18] dt-bindings: mtd: pl353-nand: Describe this hardware controller Miquel Raynal
@ 2021-06-10  8:20 ` Miquel Raynal
  2021-06-11 19:01   ` Miquel Raynal
  2021-06-10 15:21 ` [PATCH v23 00/18] ARM Primecell PL35x support Krzysztof Kozlowski
                   ` (2 subsequent siblings)
  20 siblings, 1 reply; 33+ messages in thread
From: Miquel Raynal @ 2021-06-10  8:20 UTC (permalink / raw)
  To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus,
	linux-mtd, Rob Herring, devicetree, Krzysztof Kozlowski
  Cc: Michal Simek, Naga Sureshkumar Relli, Amit Kumar Mahapatra,
	Thomas Petazzoni, linux-arm-kernel, linux-kernel, helmut.grohne,
	Srinivas Goud, Siva Durga Prasad Paladugu, Miquel Raynal,
	Michael Walle

This hardware controller is embedded in XilinX Zynq-7000 SoCs and has
partial support for Hamming ECC correction.

This work is inspired from the original contributions of Punnaiah
Choudary Kalluri and Naga Sureshkumar Relli.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Michael Walle <michael@walle.cc> [on zynq-7000]
---
 drivers/mtd/nand/raw/Kconfig                 |    8 +
 drivers/mtd/nand/raw/Makefile                |    1 +
 drivers/mtd/nand/raw/pl35x-nand-controller.c | 1194 ++++++++++++++++++
 3 files changed, 1203 insertions(+)
 create mode 100644 drivers/mtd/nand/raw/pl35x-nand-controller.c

diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index 30f061939560..630728de4b7c 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -453,6 +453,14 @@ config MTD_NAND_ROCKCHIP
 	    NFC v800: RK3308, RV1108
 	    NFC v900: PX30, RK3326
 
+config MTD_NAND_PL35X
+	tristate "ARM PL35X NAND controller"
+	depends on OF || COMPILE_TEST
+	depends on PL353_SMC
+	help
+	  Enables support for PrimeCell SMC PL351 and PL353 NAND
+	  controller found on Zynq7000.
+
 comment "Misc"
 
 config MTD_SM_COMMON
diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile
index d011c6c53f8f..2f97958c3a33 100644
--- a/drivers/mtd/nand/raw/Makefile
+++ b/drivers/mtd/nand/raw/Makefile
@@ -57,6 +57,7 @@ obj-$(CONFIG_MTD_NAND_CADENCE)		+= cadence-nand-controller.o
 obj-$(CONFIG_MTD_NAND_ARASAN)		+= arasan-nand-controller.o
 obj-$(CONFIG_MTD_NAND_INTEL_LGM)	+= intel-nand-controller.o
 obj-$(CONFIG_MTD_NAND_ROCKCHIP)		+= rockchip-nand-controller.o
+obj-$(CONFIG_MTD_NAND_PL35X)		+= pl35x-nand-controller.o
 
 nand-objs := nand_base.o nand_legacy.o nand_bbt.o nand_timings.o nand_ids.o
 nand-objs += nand_onfi.o
diff --git a/drivers/mtd/nand/raw/pl35x-nand-controller.c b/drivers/mtd/nand/raw/pl35x-nand-controller.c
new file mode 100644
index 000000000000..8a91e069ee2e
--- /dev/null
+++ b/drivers/mtd/nand/raw/pl35x-nand-controller.c
@@ -0,0 +1,1194 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM PL35X NAND flash controller driver
+ *
+ * Copyright (C) 2017 Xilinx, Inc
+ * Author:
+ *   Miquel Raynal <miquel.raynal@bootlin.com>
+ * Original work (rewritten):
+ *   Punnaiah Choudary Kalluri <punnaia@xilinx.com>
+ *   Naga Sureshkumar Relli <nagasure@xilinx.com>
+ */
+
+#include <linux/amba/bus.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/iopoll.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+
+#define PL35X_NANDC_DRIVER_NAME "pl35x-nand-controller"
+
+/* SMC controller status register (RO) */
+#define PL35X_SMC_MEMC_STATUS 0x0
+#define   PL35X_SMC_MEMC_STATUS_RAW_INT_STATUS1	BIT(6)
+/* SMC clear config register (WO) */
+#define PL35X_SMC_MEMC_CFG_CLR 0xC
+#define   PL35X_SMC_MEMC_CFG_CLR_INT_DIS_1	BIT(1)
+#define   PL35X_SMC_MEMC_CFG_CLR_INT_CLR_1	BIT(4)
+#define   PL35X_SMC_MEMC_CFG_CLR_ECC_INT_DIS_1	BIT(6)
+/* SMC direct command register (WO) */
+#define PL35X_SMC_DIRECT_CMD 0x10
+#define   PL35X_SMC_DIRECT_CMD_NAND_CS (0x4 << 23)
+#define   PL35X_SMC_DIRECT_CMD_UPD_REGS (0x2 << 21)
+/* SMC set cycles register (WO) */
+#define PL35X_SMC_CYCLES 0x14
+#define   PL35X_SMC_NAND_TRC_CYCLES(x) ((x) << 0)
+#define   PL35X_SMC_NAND_TWC_CYCLES(x) ((x) << 4)
+#define   PL35X_SMC_NAND_TREA_CYCLES(x) ((x) << 8)
+#define   PL35X_SMC_NAND_TWP_CYCLES(x) ((x) << 11)
+#define   PL35X_SMC_NAND_TCLR_CYCLES(x) ((x) << 14)
+#define   PL35X_SMC_NAND_TAR_CYCLES(x) ((x) << 17)
+#define   PL35X_SMC_NAND_TRR_CYCLES(x) ((x) << 20)
+/* SMC set opmode register (WO) */
+#define PL35X_SMC_OPMODE 0x18
+#define   PL35X_SMC_OPMODE_BW_8 0
+#define   PL35X_SMC_OPMODE_BW_16 1
+/* SMC ECC status register (RO) */
+#define PL35X_SMC_ECC_STATUS 0x400
+#define   PL35X_SMC_ECC_STATUS_ECC_BUSY BIT(6)
+/* SMC ECC configuration register */
+#define PL35X_SMC_ECC_CFG 0x404
+#define   PL35X_SMC_ECC_CFG_MODE_MASK 0xC
+#define   PL35X_SMC_ECC_CFG_MODE_BYPASS 0
+#define   PL35X_SMC_ECC_CFG_MODE_APB BIT(2)
+#define   PL35X_SMC_ECC_CFG_MODE_MEM BIT(3)
+#define   PL35X_SMC_ECC_CFG_PGSIZE_MASK	0x3
+/* SMC ECC command 1 register */
+#define PL35X_SMC_ECC_CMD1 0x408
+#define   PL35X_SMC_ECC_CMD1_WRITE(x) ((x) << 0)
+#define   PL35X_SMC_ECC_CMD1_READ(x) ((x) << 8)
+#define   PL35X_SMC_ECC_CMD1_READ_END(x) ((x) << 16)
+#define   PL35X_SMC_ECC_CMD1_READ_END_VALID(x) ((x) << 24)
+/* SMC ECC command 2 register */
+#define PL35X_SMC_ECC_CMD2 0x40C
+#define   PL35X_SMC_ECC_CMD2_WRITE_COL_CHG(x) ((x) << 0)
+#define   PL35X_SMC_ECC_CMD2_READ_COL_CHG(x) ((x) << 8)
+#define   PL35X_SMC_ECC_CMD2_READ_COL_CHG_END(x) ((x) << 16)
+#define   PL35X_SMC_ECC_CMD2_READ_COL_CHG_END_VALID(x) ((x) << 24)
+/* SMC ECC value registers (RO) */
+#define PL35X_SMC_ECC_VALUE(x) (0x418 + (4 * (x)))
+#define   PL35X_SMC_ECC_VALUE_IS_CORRECTABLE(x) ((x) & BIT(27))
+#define   PL35X_SMC_ECC_VALUE_HAS_FAILED(x) ((x) & BIT(28))
+#define   PL35X_SMC_ECC_VALUE_IS_VALID(x) ((x) & BIT(30))
+
+/* NAND AXI interface */
+#define PL35X_SMC_CMD_PHASE 0
+#define PL35X_SMC_CMD_PHASE_CMD0(x) ((x) << 3)
+#define PL35X_SMC_CMD_PHASE_CMD1(x) ((x) << 11)
+#define PL35X_SMC_CMD_PHASE_CMD1_VALID BIT(20)
+#define PL35X_SMC_CMD_PHASE_ADDR(pos, x) ((x) << (8 * (pos)))
+#define PL35X_SMC_CMD_PHASE_NADDRS(x) ((x) << 21)
+#define PL35X_SMC_DATA_PHASE BIT(19)
+#define PL35X_SMC_DATA_PHASE_ECC_LAST BIT(10)
+#define PL35X_SMC_DATA_PHASE_CLEAR_CS BIT(21)
+
+#define PL35X_NAND_MAX_CS 1
+#define PL35X_NAND_LAST_XFER_SZ 4
+#define TO_CYCLES(ps, period_ns) (DIV_ROUND_UP((ps) / 1000, period_ns))
+
+#define PL35X_NAND_ECC_BITS_MASK 0xFFF
+#define PL35X_NAND_ECC_BYTE_OFF_MASK 0x1FF
+#define PL35X_NAND_ECC_BIT_OFF_MASK 0x7
+
+struct pl35x_nand_timings {
+	unsigned int t_rc:4;
+	unsigned int t_wc:4;
+	unsigned int t_rea:3;
+	unsigned int t_wp:3;
+	unsigned int t_clr:3;
+	unsigned int t_ar:3;
+	unsigned int t_rr:4;
+	unsigned int rsvd:8;
+};
+
+struct pl35x_nand {
+	struct list_head node;
+	struct nand_chip chip;
+	unsigned int cs;
+	unsigned int addr_cycles;
+	u32 ecc_cfg;
+	u32 timings;
+};
+
+/**
+ * struct pl35x_nandc - NAND flash controller driver structure
+ * @dev: Kernel device
+ * @conf_regs: SMC configuration registers for command phase
+ * @io_regs: NAND data registers for data phase
+ * @controller: Core NAND controller structure
+ * @chip: NAND chip information structure
+ * @selected_chip: NAND chip currently selected by the controller
+ * @assigned_cs: List of assigned CS
+ * @ecc_buf: Temporary buffer to extract ECC bytes
+ */
+struct pl35x_nandc {
+	struct device *dev;
+	void __iomem *conf_regs;
+	void __iomem *io_regs;
+	struct nand_controller controller;
+	struct list_head chips;
+	struct nand_chip *selected_chip;
+	unsigned long assigned_cs;
+	u8 *ecc_buf;
+};
+
+static inline struct pl35x_nandc *to_pl35x_nandc(struct nand_controller *ctrl)
+{
+	return container_of(ctrl, struct pl35x_nandc, controller);
+}
+
+static inline struct pl35x_nand *to_pl35x_nand(struct nand_chip *chip)
+{
+	return container_of(chip, struct pl35x_nand, chip);
+}
+
+static int pl35x_ecc_ooblayout16_ecc(struct mtd_info *mtd, int section,
+				     struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+
+	if (section >= chip->ecc.steps)
+		return -ERANGE;
+
+	oobregion->offset = (section * chip->ecc.bytes);
+	oobregion->length = chip->ecc.bytes;
+
+	return 0;
+}
+
+static int pl35x_ecc_ooblayout16_free(struct mtd_info *mtd, int section,
+				      struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+
+	if (section >= chip->ecc.steps)
+		return -ERANGE;
+
+	oobregion->offset = (section * chip->ecc.bytes) + 8;
+	oobregion->length = 8;
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops pl35x_ecc_ooblayout16_ops = {
+	.ecc = pl35x_ecc_ooblayout16_ecc,
+	.free = pl35x_ecc_ooblayout16_free,
+};
+
+/* Generic flash bbt decriptors */
+static u8 bbt_pattern[] = { 'B', 'b', 't', '0' };
+static u8 mirror_pattern[] = { '1', 't', 'b', 'B' };
+
+static struct nand_bbt_descr bbt_main_descr = {
+	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+		| NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
+	.offs = 4,
+	.len = 4,
+	.veroffs = 20,
+	.maxblocks = 4,
+	.pattern = bbt_pattern
+};
+
+static struct nand_bbt_descr bbt_mirror_descr = {
+	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+		| NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
+	.offs = 4,
+	.len = 4,
+	.veroffs = 20,
+	.maxblocks = 4,
+	.pattern = mirror_pattern
+};
+
+static void pl35x_smc_update_regs(struct pl35x_nandc *nfc)
+{
+	writel(PL35X_SMC_DIRECT_CMD_NAND_CS |
+	       PL35X_SMC_DIRECT_CMD_UPD_REGS,
+	       nfc->conf_regs + PL35X_SMC_DIRECT_CMD);
+}
+
+static int pl35x_smc_set_buswidth(struct pl35x_nandc *nfc, unsigned int bw)
+{
+	if (bw != PL35X_SMC_OPMODE_BW_8 && bw != PL35X_SMC_OPMODE_BW_16)
+		return -EINVAL;
+
+	writel(bw, nfc->conf_regs + PL35X_SMC_OPMODE);
+	pl35x_smc_update_regs(nfc);
+
+	return 0;
+}
+
+static void pl35x_smc_clear_irq(struct pl35x_nandc *nfc)
+{
+	writel(PL35X_SMC_MEMC_CFG_CLR_INT_CLR_1,
+	       nfc->conf_regs + PL35X_SMC_MEMC_CFG_CLR);
+}
+
+static int pl35x_smc_wait_for_irq(struct pl35x_nandc *nfc)
+{
+	u32 reg;
+	int ret;
+
+	ret = readl_poll_timeout(nfc->conf_regs + PL35X_SMC_MEMC_STATUS, reg,
+				 reg & PL35X_SMC_MEMC_STATUS_RAW_INT_STATUS1,
+				 10, 1000000);
+	if (ret)
+		dev_err(nfc->dev,
+			"Timeout polling on NAND controller interrupt (0x%x)\n",
+			reg);
+
+	pl35x_smc_clear_irq(nfc);
+
+	return ret;
+}
+
+static int pl35x_smc_wait_for_ecc_done(struct pl35x_nandc *nfc)
+{
+	u32 reg;
+	int ret;
+
+	ret = readl_poll_timeout(nfc->conf_regs + PL35X_SMC_ECC_STATUS, reg,
+				 !(reg & PL35X_SMC_ECC_STATUS_ECC_BUSY),
+				 10, 1000000);
+	if (ret)
+		dev_err(nfc->dev,
+			"Timeout polling on ECC controller interrupt\n");
+
+	return ret;
+}
+
+static int pl35x_smc_set_ecc_mode(struct pl35x_nandc *nfc,
+				  struct nand_chip *chip,
+				  unsigned int mode)
+{
+	struct pl35x_nand *plnand;
+	u32 ecc_cfg;
+
+	ecc_cfg = readl(nfc->conf_regs + PL35X_SMC_ECC_CFG);
+	ecc_cfg &= ~PL35X_SMC_ECC_CFG_MODE_MASK;
+	ecc_cfg |= mode;
+	writel(ecc_cfg, nfc->conf_regs + PL35X_SMC_ECC_CFG);
+
+	if (chip) {
+		plnand = to_pl35x_nand(chip);
+		plnand->ecc_cfg = ecc_cfg;
+	}
+
+	if (mode != PL35X_SMC_ECC_CFG_MODE_BYPASS)
+		return pl35x_smc_wait_for_ecc_done(nfc);
+
+	return 0;
+}
+
+static void pl35x_smc_force_byte_access(struct nand_chip *chip,
+					bool force_8bit)
+{
+	struct pl35x_nandc *nfc = to_pl35x_nandc(chip->controller);
+	int ret;
+
+	if (!(chip->options & NAND_BUSWIDTH_16))
+		return;
+
+	if (force_8bit)
+		ret = pl35x_smc_set_buswidth(nfc, PL35X_SMC_OPMODE_BW_8);
+	else
+		ret = pl35x_smc_set_buswidth(nfc, PL35X_SMC_OPMODE_BW_16);
+
+	if (ret)
+		dev_err(nfc->dev, "Error in Buswidth\n");
+}
+
+static void pl35x_nand_select_target(struct nand_chip *chip,
+				     unsigned int die_nr)
+{
+	struct pl35x_nandc *nfc = to_pl35x_nandc(chip->controller);
+	struct pl35x_nand *plnand = to_pl35x_nand(chip);
+
+	if (chip == nfc->selected_chip)
+		return;
+
+	/* Setup the timings */
+	writel(plnand->timings, nfc->conf_regs + PL35X_SMC_CYCLES);
+	pl35x_smc_update_regs(nfc);
+
+	/* Configure the ECC engine */
+	writel(plnand->ecc_cfg, nfc->conf_regs + PL35X_SMC_ECC_CFG);
+
+	nfc->selected_chip = chip;
+}
+
+static void pl35x_nand_read_data_op(struct nand_chip *chip, u8 *in,
+				    unsigned int len, bool force_8bit,
+				    unsigned int flags, unsigned int last_flags)
+{
+	struct pl35x_nandc *nfc = to_pl35x_nandc(chip->controller);
+	unsigned int buf_end = len / 4;
+	unsigned int in_start = round_down(len, 4);
+	unsigned int data_phase_addr;
+	u32 *buf32 = (u32 *)in;
+	u8 *buf8 = (u8 *)in;
+	int i;
+
+	if (force_8bit)
+		pl35x_smc_force_byte_access(chip, true);
+
+	for (i = 0; i < buf_end; i++) {
+		data_phase_addr = PL35X_SMC_DATA_PHASE + flags;
+		if (i + 1 == buf_end)
+			data_phase_addr = PL35X_SMC_DATA_PHASE + last_flags;
+
+		buf32[i] = readl(nfc->io_regs + data_phase_addr);
+	}
+
+	/* No working extra flags on unaligned data accesses */
+	for (i = in_start; i < len; i++)
+		buf8[i] = readb(nfc->io_regs + PL35X_SMC_DATA_PHASE);
+
+	if (force_8bit)
+		pl35x_smc_force_byte_access(chip, false);
+}
+
+static void pl35x_nand_write_data_op(struct nand_chip *chip, const u8 *out,
+				     int len, bool force_8bit,
+				     unsigned int flags,
+				     unsigned int last_flags)
+{
+	struct pl35x_nandc *nfc = to_pl35x_nandc(chip->controller);
+	unsigned int buf_end = len / 4;
+	unsigned int in_start = round_down(len, 4);
+	const u32 *buf32 = (const u32 *)out;
+	const u8 *buf8 = (const u8 *)out;
+	unsigned int data_phase_addr;
+	int i;
+
+	if (force_8bit)
+		pl35x_smc_force_byte_access(chip, true);
+
+	for (i = 0; i < buf_end; i++) {
+		data_phase_addr = PL35X_SMC_DATA_PHASE + flags;
+		if (i + 1 == buf_end)
+			data_phase_addr = PL35X_SMC_DATA_PHASE + last_flags;
+
+		writel(buf32[i], nfc->io_regs + data_phase_addr);
+	}
+
+	/* No working extra flags on unaligned data accesses */
+	for (i = in_start; i < len; i++)
+		writeb(buf8[i], nfc->io_regs + PL35X_SMC_DATA_PHASE);
+
+	if (force_8bit)
+		pl35x_smc_force_byte_access(chip, false);
+}
+
+static int pl35x_nand_correct_data(struct pl35x_nandc *nfc, unsigned char *buf,
+				   unsigned char *read_ecc,
+				   unsigned char *calc_ecc)
+{
+	unsigned short ecc_odd, ecc_even, read_ecc_lower, read_ecc_upper;
+	unsigned short calc_ecc_lower, calc_ecc_upper;
+	unsigned short byte_addr, bit_addr;
+
+	read_ecc_lower = (read_ecc[0] | (read_ecc[1] << 8)) &
+			 PL35X_NAND_ECC_BITS_MASK;
+	read_ecc_upper = ((read_ecc[1] >> 4) | (read_ecc[2] << 4)) &
+			 PL35X_NAND_ECC_BITS_MASK;
+
+	calc_ecc_lower = (calc_ecc[0] | (calc_ecc[1] << 8)) &
+			 PL35X_NAND_ECC_BITS_MASK;
+	calc_ecc_upper = ((calc_ecc[1] >> 4) | (calc_ecc[2] << 4)) &
+			 PL35X_NAND_ECC_BITS_MASK;
+
+	ecc_odd = read_ecc_lower ^ calc_ecc_lower;
+	ecc_even = read_ecc_upper ^ calc_ecc_upper;
+
+	/* No error */
+	if (likely(!ecc_odd && !ecc_even))
+		return 0;
+
+	/* One error in the main data; to be corrected */
+	if (ecc_odd == (~ecc_even & PL35X_NAND_ECC_BITS_MASK)) {
+		/* Bits [11:3] of error code give the byte offset */
+		byte_addr = (ecc_odd >> 3) & PL35X_NAND_ECC_BYTE_OFF_MASK;
+		/* Bits [2:0] of error code give the bit offset */
+		bit_addr = ecc_odd & PL35X_NAND_ECC_BIT_OFF_MASK;
+		/* Toggle the faulty bit */
+		buf[byte_addr] ^= (BIT(bit_addr));
+
+		return 1;
+	}
+
+	/* One error in the ECC data; no action needed */
+	if (hweight32(ecc_odd | ecc_even) == 1)
+		return 1;
+
+	return -EBADMSG;
+}
+
+static void pl35x_nand_ecc_reg_to_array(struct nand_chip *chip, u32 ecc_reg,
+					u8 *ecc_array)
+{
+	u32 ecc_value = ~ecc_reg;
+	unsigned int ecc_byte;
+
+	for (ecc_byte = 0; ecc_byte < chip->ecc.bytes; ecc_byte++)
+		ecc_array[ecc_byte] = ecc_value >> (8 * ecc_byte);
+}
+
+static int pl35x_nand_read_eccbytes(struct pl35x_nandc *nfc,
+				    struct nand_chip *chip, u8 *read_ecc)
+{
+	u32 ecc_value;
+	int chunk;
+
+	for (chunk = 0; chunk < chip->ecc.steps;
+	     chunk++, read_ecc += chip->ecc.bytes) {
+		ecc_value = readl(nfc->conf_regs + PL35X_SMC_ECC_VALUE(chunk));
+		if (!PL35X_SMC_ECC_VALUE_IS_VALID(ecc_value))
+			return -EINVAL;
+
+		pl35x_nand_ecc_reg_to_array(chip, ecc_value, read_ecc);
+	}
+
+	return 0;
+}
+
+static int pl35x_nand_recover_data_hwecc(struct pl35x_nandc *nfc,
+					 struct nand_chip *chip, u8 *data,
+					 u8 *read_ecc)
+{
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	unsigned int max_bitflips = 0, chunk;
+	u8 calc_ecc[3];
+	u32 ecc_value;
+	int stats;
+
+	for (chunk = 0; chunk < chip->ecc.steps;
+	     chunk++, data += chip->ecc.size, read_ecc += chip->ecc.bytes) {
+		/* Read ECC value for each chunk */
+		ecc_value = readl(nfc->conf_regs + PL35X_SMC_ECC_VALUE(chunk));
+
+		if (!PL35X_SMC_ECC_VALUE_IS_VALID(ecc_value))
+			return -EINVAL;
+
+		if (PL35X_SMC_ECC_VALUE_HAS_FAILED(ecc_value)) {
+			mtd->ecc_stats.failed++;
+			continue;
+		}
+
+		pl35x_nand_ecc_reg_to_array(chip, ecc_value, calc_ecc);
+		stats = pl35x_nand_correct_data(nfc, data, read_ecc, calc_ecc);
+		if (stats < 0) {
+			mtd->ecc_stats.failed++;
+		} else {
+			mtd->ecc_stats.corrected += stats;
+			max_bitflips = max_t(unsigned int, max_bitflips, stats);
+		}
+	}
+
+	return max_bitflips;
+}
+
+static int pl35x_nand_write_page_hwecc(struct nand_chip *chip,
+				       const u8 *buf, int oob_required,
+				       int page)
+{
+	struct pl35x_nandc *nfc = to_pl35x_nandc(chip->controller);
+	struct pl35x_nand *plnand = to_pl35x_nand(chip);
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	unsigned int first_row = (mtd->writesize <= 512) ? 1 : 2;
+	unsigned int nrows = plnand->addr_cycles;
+	u32 addr1 = 0, addr2 = 0, row;
+	u32 cmd_addr;
+	int i, ret;
+
+	ret = pl35x_smc_set_ecc_mode(nfc, chip, PL35X_SMC_ECC_CFG_MODE_APB);
+	if (ret)
+		return ret;
+
+	cmd_addr = PL35X_SMC_CMD_PHASE |
+		   PL35X_SMC_CMD_PHASE_NADDRS(plnand->addr_cycles) |
+		   PL35X_SMC_CMD_PHASE_CMD0(NAND_CMD_SEQIN);
+
+	for (i = 0, row = first_row; row < nrows; i++, row++) {
+		u8 addr = page >> ((i * 8) & 0xFF);
+
+		if (row < 4)
+			addr1 |= PL35X_SMC_CMD_PHASE_ADDR(row, addr);
+		else
+			addr2 |= PL35X_SMC_CMD_PHASE_ADDR(row - 4, addr);
+	}
+
+	/* Send the command and address cycles */
+	writel(addr1, nfc->io_regs + cmd_addr);
+	if (plnand->addr_cycles > 4)
+		writel(addr2, nfc->io_regs + cmd_addr);
+
+	/* Write the data with the engine enabled */
+	pl35x_nand_write_data_op(chip, buf, mtd->writesize, false,
+				 0, PL35X_SMC_DATA_PHASE_ECC_LAST);
+	ret = pl35x_smc_wait_for_ecc_done(nfc);
+	if (ret)
+		goto disable_ecc_engine;
+
+	/* Copy the HW calculated ECC bytes in the OOB buffer */
+	ret = pl35x_nand_read_eccbytes(nfc, chip, nfc->ecc_buf);
+	if (ret)
+		goto disable_ecc_engine;
+
+	if (!oob_required)
+		memset(chip->oob_poi, 0xFF, mtd->oobsize);
+
+	ret = mtd_ooblayout_set_eccbytes(mtd, nfc->ecc_buf, chip->oob_poi,
+					 0, chip->ecc.total);
+	if (ret)
+		goto disable_ecc_engine;
+
+	/* Write the spare area with ECC bytes */
+	pl35x_nand_write_data_op(chip, chip->oob_poi, mtd->oobsize, false, 0,
+				 PL35X_SMC_CMD_PHASE_CMD1(NAND_CMD_PAGEPROG) |
+				 PL35X_SMC_CMD_PHASE_CMD1_VALID |
+				 PL35X_SMC_DATA_PHASE_CLEAR_CS);
+	ret = pl35x_smc_wait_for_irq(nfc);
+	if (ret)
+		goto disable_ecc_engine;
+
+disable_ecc_engine:
+	pl35x_smc_set_ecc_mode(nfc, chip, PL35X_SMC_ECC_CFG_MODE_BYPASS);
+
+	return ret;
+}
+
+/*
+ * This functions reads data and checks the data integrity by comparing hardware
+ * generated ECC values and read ECC values from spare area.
+ *
+ * There is a limitation with SMC controller: ECC_LAST must be set on the
+ * last data access to tell the ECC engine not to expect any further data.
+ * In practice, this implies to shrink the last data transfert by eg. 4 bytes,
+ * and doing a last 4-byte transfer with the additional bit set. The last block
+ * should be aligned with the end of an ECC block. Because of this limitation,
+ * it is not possible to use the core routines.
+ */
+static int pl35x_nand_read_page_hwecc(struct nand_chip *chip,
+				      u8 *buf, int oob_required, int page)
+{
+	const struct nand_sdr_timings *sdr =
+		nand_get_sdr_timings(nand_get_interface_config(chip));
+	struct pl35x_nandc *nfc = to_pl35x_nandc(chip->controller);
+	struct pl35x_nand *plnand = to_pl35x_nand(chip);
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	unsigned int first_row = (mtd->writesize <= 512) ? 1 : 2;
+	unsigned int nrows = plnand->addr_cycles;
+	unsigned int addr1 = 0, addr2 = 0, row;
+	u32 cmd_addr;
+	int i, ret;
+
+	ret = pl35x_smc_set_ecc_mode(nfc, chip, PL35X_SMC_ECC_CFG_MODE_APB);
+	if (ret)
+		return ret;
+
+	cmd_addr = PL35X_SMC_CMD_PHASE |
+		   PL35X_SMC_CMD_PHASE_NADDRS(plnand->addr_cycles) |
+		   PL35X_SMC_CMD_PHASE_CMD0(NAND_CMD_READ0) |
+		   PL35X_SMC_CMD_PHASE_CMD1(NAND_CMD_READSTART) |
+		   PL35X_SMC_CMD_PHASE_CMD1_VALID;
+
+	for (i = 0, row = first_row; row < nrows; i++, row++) {
+		u8 addr = page >> ((i * 8) & 0xFF);
+
+		if (row < 4)
+			addr1 |= PL35X_SMC_CMD_PHASE_ADDR(row, addr);
+		else
+			addr2 |= PL35X_SMC_CMD_PHASE_ADDR(row - 4, addr);
+	}
+
+	/* Send the command and address cycles */
+	writel(addr1, nfc->io_regs + cmd_addr);
+	if (plnand->addr_cycles > 4)
+		writel(addr2, nfc->io_regs + cmd_addr);
+
+	/* Wait the data to be available in the NAND cache */
+	ndelay(PSEC_TO_NSEC(sdr->tRR_min));
+	ret = pl35x_smc_wait_for_irq(nfc);
+	if (ret)
+		goto disable_ecc_engine;
+
+	/* Retrieve the raw data with the engine enabled */
+	pl35x_nand_read_data_op(chip, buf, mtd->writesize, false,
+				0, PL35X_SMC_DATA_PHASE_ECC_LAST);
+	ret = pl35x_smc_wait_for_ecc_done(nfc);
+	if (ret)
+		goto disable_ecc_engine;
+
+	/* Retrieve the stored ECC bytes */
+	pl35x_nand_read_data_op(chip, chip->oob_poi, mtd->oobsize, false,
+				0, PL35X_SMC_DATA_PHASE_CLEAR_CS);
+	ret = mtd_ooblayout_get_eccbytes(mtd, nfc->ecc_buf, chip->oob_poi, 0,
+					 chip->ecc.total);
+	if (ret)
+		goto disable_ecc_engine;
+
+	pl35x_smc_set_ecc_mode(nfc, chip, PL35X_SMC_ECC_CFG_MODE_BYPASS);
+
+	/* Correct the data and report failures */
+	return pl35x_nand_recover_data_hwecc(nfc, chip, buf, nfc->ecc_buf);
+
+disable_ecc_engine:
+	pl35x_smc_set_ecc_mode(nfc, chip, PL35X_SMC_ECC_CFG_MODE_BYPASS);
+
+	return ret;
+}
+
+static int pl35x_nand_exec_op(struct nand_chip *chip,
+			      const struct nand_subop *subop)
+{
+	struct pl35x_nandc *nfc = to_pl35x_nandc(chip->controller);
+	const struct nand_op_instr *instr, *data_instr = NULL;
+	unsigned int rdy_tim_ms = 0, naddrs = 0, cmds = 0, last_flags = 0;
+	u32 addr1 = 0, addr2 = 0, cmd0 = 0, cmd1 = 0, cmd_addr = 0;
+	unsigned int op_id, len, offset, rdy_del_ns;
+	int last_instr_type = -1;
+	bool cmd1_valid = false;
+	const u8 *addrs;
+	int i, ret;
+
+	for (op_id = 0; op_id < subop->ninstrs; op_id++) {
+		instr = &subop->instrs[op_id];
+
+		switch (instr->type) {
+		case NAND_OP_CMD_INSTR:
+			if (!cmds) {
+				cmd0 = PL35X_SMC_CMD_PHASE_CMD0(instr->ctx.cmd.opcode);
+			} else {
+				cmd1 = PL35X_SMC_CMD_PHASE_CMD1(instr->ctx.cmd.opcode);
+				if (last_instr_type != NAND_OP_DATA_OUT_INSTR)
+					cmd1_valid = true;
+			}
+			cmds++;
+			break;
+
+		case NAND_OP_ADDR_INSTR:
+			offset = nand_subop_get_addr_start_off(subop, op_id);
+			naddrs = nand_subop_get_num_addr_cyc(subop, op_id);
+			addrs = &instr->ctx.addr.addrs[offset];
+			cmd_addr |= PL35X_SMC_CMD_PHASE_NADDRS(naddrs);
+
+			for (i = offset; i < naddrs; i++) {
+				if (i < 4)
+					addr1 |= PL35X_SMC_CMD_PHASE_ADDR(i, addrs[i]);
+				else
+					addr2 |= PL35X_SMC_CMD_PHASE_ADDR(i - 4, addrs[i]);
+			}
+			break;
+
+		case NAND_OP_DATA_IN_INSTR:
+		case NAND_OP_DATA_OUT_INSTR:
+			data_instr = instr;
+			len = nand_subop_get_data_len(subop, op_id);
+			break;
+
+		case NAND_OP_WAITRDY_INSTR:
+			rdy_tim_ms = instr->ctx.waitrdy.timeout_ms;
+			rdy_del_ns = instr->delay_ns;
+			break;
+		}
+
+		last_instr_type = instr->type;
+	}
+
+	/* Command phase */
+	cmd_addr |= PL35X_SMC_CMD_PHASE | cmd0 | cmd1 |
+		    (cmd1_valid ? PL35X_SMC_CMD_PHASE_CMD1_VALID : 0);
+	writel(addr1, nfc->io_regs + cmd_addr);
+	if (naddrs > 4)
+		writel(addr2, nfc->io_regs + cmd_addr);
+
+	/* Data phase */
+	if (data_instr && data_instr->type == NAND_OP_DATA_OUT_INSTR) {
+		last_flags = PL35X_SMC_DATA_PHASE_CLEAR_CS;
+		if (cmds == 2)
+			last_flags |= cmd1 | PL35X_SMC_CMD_PHASE_CMD1_VALID;
+
+		pl35x_nand_write_data_op(chip, data_instr->ctx.data.buf.out,
+					 len, data_instr->ctx.data.force_8bit,
+					 0, last_flags);
+	}
+
+	if (rdy_tim_ms) {
+		ndelay(rdy_del_ns);
+		ret = pl35x_smc_wait_for_irq(nfc);
+		if (ret)
+			return ret;
+	}
+
+	if (data_instr && data_instr->type == NAND_OP_DATA_IN_INSTR)
+		pl35x_nand_read_data_op(chip, data_instr->ctx.data.buf.in,
+					len, data_instr->ctx.data.force_8bit,
+					0, PL35X_SMC_DATA_PHASE_CLEAR_CS);
+
+	return 0;
+}
+
+static const struct nand_op_parser pl35x_nandc_op_parser = NAND_OP_PARSER(
+	NAND_OP_PARSER_PATTERN(pl35x_nand_exec_op,
+			       NAND_OP_PARSER_PAT_CMD_ELEM(true),
+			       NAND_OP_PARSER_PAT_ADDR_ELEM(true, 7),
+			       NAND_OP_PARSER_PAT_CMD_ELEM(true),
+			       NAND_OP_PARSER_PAT_WAITRDY_ELEM(true),
+			       NAND_OP_PARSER_PAT_DATA_IN_ELEM(true, 2112)),
+	NAND_OP_PARSER_PATTERN(pl35x_nand_exec_op,
+			       NAND_OP_PARSER_PAT_CMD_ELEM(false),
+			       NAND_OP_PARSER_PAT_ADDR_ELEM(false, 7),
+			       NAND_OP_PARSER_PAT_DATA_OUT_ELEM(false, 2112),
+			       NAND_OP_PARSER_PAT_CMD_ELEM(false),
+			       NAND_OP_PARSER_PAT_WAITRDY_ELEM(true)),
+	NAND_OP_PARSER_PATTERN(pl35x_nand_exec_op,
+			       NAND_OP_PARSER_PAT_CMD_ELEM(false),
+			       NAND_OP_PARSER_PAT_ADDR_ELEM(false, 7),
+			       NAND_OP_PARSER_PAT_DATA_OUT_ELEM(false, 2112),
+			       NAND_OP_PARSER_PAT_CMD_ELEM(true),
+			       NAND_OP_PARSER_PAT_WAITRDY_ELEM(true)),
+	);
+
+static int pl35x_nfc_exec_op(struct nand_chip *chip,
+			     const struct nand_operation *op,
+			     bool check_only)
+{
+	if (!check_only)
+		pl35x_nand_select_target(chip, op->cs);
+
+	return nand_op_parser_exec_op(chip, &pl35x_nandc_op_parser,
+				      op, check_only);
+}
+
+static int pl35x_nfc_setup_interface(struct nand_chip *chip, int cs,
+				     const struct nand_interface_config *conf)
+{
+	struct pl35x_nandc *nfc = to_pl35x_nandc(chip->controller);
+	struct pl35x_nand *plnand = to_pl35x_nand(chip);
+	struct pl35x_nand_timings tmgs = {};
+	const struct nand_sdr_timings *sdr;
+	unsigned int period_ns, val;
+	struct clk *mclk;
+
+	sdr = nand_get_sdr_timings(conf);
+	if (IS_ERR(sdr))
+		return PTR_ERR(sdr);
+
+	mclk = of_clk_get_by_name(nfc->dev->parent->of_node, "memclk");
+	if (IS_ERR(mclk)) {
+		dev_err(nfc->dev, "Failed to retrieve SMC memclk\n");
+		return PTR_ERR(mclk);
+	}
+
+	/*
+	 * SDR timings are given in pico-seconds while NFC timings must be
+	 * expressed in NAND controller clock cycles. We use the TO_CYCLE()
+	 * macro to convert from one to the other.
+	 */
+	period_ns = NSEC_PER_SEC / clk_get_rate(mclk);
+
+	/*
+	 * PL35X SMC needs one extra read cycle in SDR Mode 5. This is not
+	 * written anywhere in the datasheet but is an empirical observation.
+	 */
+	val = TO_CYCLES(sdr->tRC_min, period_ns);
+	if (sdr->tRC_min <= 20000)
+		val++;
+
+	tmgs.t_rc = val;
+	if (tmgs.t_rc != val || tmgs.t_rc < 2)
+		return -EINVAL;
+
+	val = TO_CYCLES(sdr->tWC_min, period_ns);
+	tmgs.t_wc = val;
+	if (tmgs.t_wc != val || tmgs.t_wc < 2)
+		return -EINVAL;
+
+	/*
+	 * For all SDR modes, PL35X SMC needs tREA_max being 1,
+	 * this is also an empirical result.
+	 */
+	tmgs.t_rea = 1;
+
+	val = TO_CYCLES(sdr->tWP_min, period_ns);
+	tmgs.t_wp = val;
+	if (tmgs.t_wp != val || tmgs.t_wp < 1)
+		return -EINVAL;
+
+	val = TO_CYCLES(sdr->tCLR_min, period_ns);
+	tmgs.t_clr = val;
+	if (tmgs.t_clr != val)
+		return -EINVAL;
+
+	val = TO_CYCLES(sdr->tAR_min, period_ns);
+	tmgs.t_ar = val;
+	if (tmgs.t_ar != val)
+		return -EINVAL;
+
+	val = TO_CYCLES(sdr->tRR_min, period_ns);
+	tmgs.t_rr = val;
+	if (tmgs.t_rr != val)
+		return -EINVAL;
+
+	if (cs == NAND_DATA_IFACE_CHECK_ONLY)
+		return 0;
+
+	plnand->timings = PL35X_SMC_NAND_TRC_CYCLES(tmgs.t_rc) |
+			  PL35X_SMC_NAND_TWC_CYCLES(tmgs.t_wc) |
+			  PL35X_SMC_NAND_TREA_CYCLES(tmgs.t_rea) |
+			  PL35X_SMC_NAND_TWP_CYCLES(tmgs.t_wp) |
+			  PL35X_SMC_NAND_TCLR_CYCLES(tmgs.t_clr) |
+			  PL35X_SMC_NAND_TAR_CYCLES(tmgs.t_ar) |
+			  PL35X_SMC_NAND_TRR_CYCLES(tmgs.t_rr);
+
+	return 0;
+}
+
+static void pl35x_smc_set_ecc_pg_size(struct pl35x_nandc *nfc,
+				      struct nand_chip *chip,
+				      unsigned int pg_sz)
+{
+	struct pl35x_nand *plnand = to_pl35x_nand(chip);
+	u32 sz;
+
+	switch (pg_sz) {
+	case SZ_512:
+		sz = 1;
+		break;
+	case SZ_1K:
+		sz = 2;
+		break;
+	case SZ_2K:
+		sz = 3;
+		break;
+	default:
+		sz = 0;
+		break;
+	}
+
+	plnand->ecc_cfg = readl(nfc->conf_regs + PL35X_SMC_ECC_CFG);
+	plnand->ecc_cfg &= ~PL35X_SMC_ECC_CFG_PGSIZE_MASK;
+	plnand->ecc_cfg |= sz;
+	writel(plnand->ecc_cfg, nfc->conf_regs + PL35X_SMC_ECC_CFG);
+}
+
+static int pl35x_nand_init_hw_ecc_controller(struct pl35x_nandc *nfc,
+					     struct nand_chip *chip)
+{
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	int ret = 0;
+
+	if (mtd->writesize < SZ_512 || mtd->writesize > SZ_2K) {
+		dev_err(nfc->dev,
+			"The hardware ECC engine is limited to pages up to 2kiB\n");
+		return -EOPNOTSUPP;
+	}
+
+	chip->ecc.strength = 1;
+	chip->ecc.bytes = 3;
+	chip->ecc.size = SZ_512;
+	chip->ecc.steps = mtd->writesize / chip->ecc.size;
+	chip->ecc.read_page = pl35x_nand_read_page_hwecc;
+	chip->ecc.write_page = pl35x_nand_write_page_hwecc;
+	chip->ecc.write_page_raw = nand_monolithic_write_page_raw;
+	pl35x_smc_set_ecc_pg_size(nfc, chip, mtd->writesize);
+
+	nfc->ecc_buf = devm_kmalloc(nfc->dev, chip->ecc.bytes * chip->ecc.steps,
+				    GFP_KERNEL);
+	if (!nfc->ecc_buf)
+		return -ENOMEM;
+
+	switch (mtd->oobsize) {
+	case 16:
+		/* Legacy Xilinx layout */
+		mtd_set_ooblayout(mtd, &pl35x_ecc_ooblayout16_ops);
+		chip->bbt_options |= NAND_BBT_NO_OOB_BBM;
+		break;
+	case 64:
+		mtd_set_ooblayout(mtd, nand_get_large_page_ooblayout());
+		break;
+	default:
+		dev_err(nfc->dev, "Unsupported OOB size\n");
+		return -EOPNOTSUPP;
+	}
+
+	return ret;
+}
+
+static int pl35x_nand_attach_chip(struct nand_chip *chip)
+{
+	const struct nand_ecc_props *requirements =
+		nanddev_get_ecc_requirements(&chip->base);
+	struct pl35x_nandc *nfc = to_pl35x_nandc(chip->controller);
+	struct pl35x_nand *plnand = to_pl35x_nand(chip);
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	int ret;
+
+	if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_NONE &&
+	    (!chip->ecc.size || !chip->ecc.strength)) {
+		if (requirements->step_size && requirements->strength) {
+			chip->ecc.size = requirements->step_size;
+			chip->ecc.strength = requirements->strength;
+		} else {
+			dev_info(nfc->dev,
+				 "No minimum ECC strength, using 1b/512B\n");
+			chip->ecc.size = 512;
+			chip->ecc.strength = 1;
+		}
+	}
+
+	if (mtd->writesize <= SZ_512)
+		plnand->addr_cycles = 1;
+	else
+		plnand->addr_cycles = 2;
+
+	if (chip->options & NAND_ROW_ADDR_3)
+		plnand->addr_cycles += 3;
+	else
+		plnand->addr_cycles += 2;
+
+	switch (chip->ecc.engine_type) {
+	case NAND_ECC_ENGINE_TYPE_ON_DIE:
+		/* Keep these legacy BBT descriptors for ON_DIE situations */
+		chip->bbt_td = &bbt_main_descr;
+		chip->bbt_md = &bbt_mirror_descr;
+		fallthrough;
+	case NAND_ECC_ENGINE_TYPE_NONE:
+	case NAND_ECC_ENGINE_TYPE_SOFT:
+		break;
+	case NAND_ECC_ENGINE_TYPE_ON_HOST:
+		ret = pl35x_nand_init_hw_ecc_controller(nfc, chip);
+		if (ret)
+			return ret;
+		break;
+	default:
+		dev_err(nfc->dev, "Unsupported ECC mode: %d\n",
+			chip->ecc.engine_type);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static const struct nand_controller_ops pl35x_nandc_ops = {
+	.attach_chip = pl35x_nand_attach_chip,
+	.exec_op = pl35x_nfc_exec_op,
+	.setup_interface = pl35x_nfc_setup_interface,
+};
+
+static int pl35x_nand_reset_state(struct pl35x_nandc *nfc)
+{
+	int ret;
+
+	/* Disable interrupts and clear their status */
+	writel(PL35X_SMC_MEMC_CFG_CLR_INT_CLR_1 |
+	       PL35X_SMC_MEMC_CFG_CLR_ECC_INT_DIS_1 |
+	       PL35X_SMC_MEMC_CFG_CLR_INT_DIS_1,
+	       nfc->conf_regs + PL35X_SMC_MEMC_CFG_CLR);
+
+	/* Set default bus width to 8-bit */
+	ret = pl35x_smc_set_buswidth(nfc, PL35X_SMC_OPMODE_BW_8);
+	if (ret)
+		return ret;
+
+	/* Ensure the ECC controller is bypassed by default */
+	ret = pl35x_smc_set_ecc_mode(nfc, NULL, PL35X_SMC_ECC_CFG_MODE_BYPASS);
+	if (ret)
+		return ret;
+
+	/*
+	 * Configure the commands that the ECC block uses to detect the
+	 * operations it should start/end.
+	 */
+	writel(PL35X_SMC_ECC_CMD1_WRITE(NAND_CMD_SEQIN) |
+	       PL35X_SMC_ECC_CMD1_READ(NAND_CMD_READ0) |
+	       PL35X_SMC_ECC_CMD1_READ_END(NAND_CMD_READSTART) |
+	       PL35X_SMC_ECC_CMD1_READ_END_VALID(NAND_CMD_READ1),
+	       nfc->conf_regs + PL35X_SMC_ECC_CMD1);
+	writel(PL35X_SMC_ECC_CMD2_WRITE_COL_CHG(NAND_CMD_RNDIN) |
+	       PL35X_SMC_ECC_CMD2_READ_COL_CHG(NAND_CMD_RNDOUT) |
+	       PL35X_SMC_ECC_CMD2_READ_COL_CHG_END(NAND_CMD_RNDOUTSTART) |
+	       PL35X_SMC_ECC_CMD2_READ_COL_CHG_END_VALID(NAND_CMD_READ1),
+	       nfc->conf_regs + PL35X_SMC_ECC_CMD2);
+
+	return 0;
+}
+
+static int pl35x_nand_chip_init(struct pl35x_nandc *nfc,
+				struct device_node *np)
+{
+	struct pl35x_nand *plnand;
+	struct nand_chip *chip;
+	struct mtd_info *mtd;
+	int cs, ret;
+
+	plnand = devm_kzalloc(nfc->dev, sizeof(*plnand), GFP_KERNEL);
+	if (!plnand)
+		return -ENOMEM;
+
+	ret = of_property_read_u32(np, "reg", &cs);
+	if (ret)
+		return ret;
+
+	if (cs >= PL35X_NAND_MAX_CS) {
+		dev_err(nfc->dev, "Wrong CS %d\n", cs);
+		return -EINVAL;
+	}
+
+	if (test_and_set_bit(cs, &nfc->assigned_cs)) {
+		dev_err(nfc->dev, "Already assigned CS %d\n", cs);
+		return -EINVAL;
+	}
+
+	plnand->cs = cs;
+
+	chip = &plnand->chip;
+	chip->options = NAND_BUSWIDTH_AUTO | NAND_USES_DMA | NAND_NO_SUBPAGE_WRITE;
+	chip->bbt_options = NAND_BBT_USE_FLASH;
+	chip->controller = &nfc->controller;
+	mtd = nand_to_mtd(chip);
+	mtd->dev.parent = nfc->dev;
+	nand_set_flash_node(chip, nfc->dev->of_node);
+	if (!mtd->name) {
+		mtd->name = devm_kasprintf(nfc->dev, GFP_KERNEL,
+					   "%s", PL35X_NANDC_DRIVER_NAME);
+		if (!mtd->name) {
+			dev_err(nfc->dev, "Failed to allocate mtd->name\n");
+			return -ENOMEM;
+		}
+	}
+
+	ret = nand_scan(chip, 1);
+	if (ret)
+		return ret;
+
+	ret = mtd_device_register(mtd, NULL, 0);
+	if (ret) {
+		nand_cleanup(chip);
+		return ret;
+	}
+
+	list_add_tail(&plnand->node, &nfc->chips);
+
+	return ret;
+}
+
+static void pl35x_nand_chips_cleanup(struct pl35x_nandc *nfc)
+{
+	struct pl35x_nand *plnand, *tmp;
+	struct nand_chip *chip;
+	int ret;
+
+	list_for_each_entry_safe(plnand, tmp, &nfc->chips, node) {
+		chip = &plnand->chip;
+		ret = mtd_device_unregister(nand_to_mtd(chip));
+		WARN_ON(ret);
+		nand_cleanup(chip);
+		list_del(&plnand->node);
+	}
+}
+
+static int pl35x_nand_chips_init(struct pl35x_nandc *nfc)
+{
+	struct device_node *np = nfc->dev->of_node, *nand_np;
+	int nchips = of_get_child_count(np);
+	int ret;
+
+	if (!nchips || nchips > PL35X_NAND_MAX_CS) {
+		dev_err(nfc->dev, "Incorrect number of NAND chips (%d)\n",
+			nchips);
+		return -EINVAL;
+	}
+
+	for_each_child_of_node(np, nand_np) {
+		ret = pl35x_nand_chip_init(nfc, nand_np);
+		if (ret) {
+			of_node_put(nand_np);
+			pl35x_nand_chips_cleanup(nfc);
+			break;
+		}
+	}
+
+	return ret;
+}
+
+static int pl35x_nand_probe(struct platform_device *pdev)
+{
+	struct device *smc_dev = pdev->dev.parent;
+	struct amba_device *smc_amba = to_amba_device(smc_dev);
+	struct pl35x_nandc *nfc;
+	u32 ret;
+
+	nfc = devm_kzalloc(&pdev->dev, sizeof(*nfc), GFP_KERNEL);
+	if (!nfc)
+		return -ENOMEM;
+
+	nfc->dev = &pdev->dev;
+	nand_controller_init(&nfc->controller);
+	nfc->controller.ops = &pl35x_nandc_ops;
+	INIT_LIST_HEAD(&nfc->chips);
+
+	nfc->conf_regs = devm_ioremap_resource(&smc_amba->dev, &smc_amba->res);
+	if (IS_ERR(nfc->conf_regs))
+		return PTR_ERR(nfc->conf_regs);
+
+	nfc->io_regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(nfc->io_regs))
+		return PTR_ERR(nfc->io_regs);
+
+	ret = pl35x_nand_reset_state(nfc);
+	if (ret)
+		return ret;
+
+	ret = pl35x_nand_chips_init(nfc);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, nfc);
+
+	return 0;
+}
+
+static int pl35x_nand_remove(struct platform_device *pdev)
+{
+	struct pl35x_nandc *nfc = platform_get_drvdata(pdev);
+
+	pl35x_nand_chips_cleanup(nfc);
+
+	return 0;
+}
+
+static const struct of_device_id pl35x_nand_of_match[] = {
+	{ .compatible = "arm,pl353-nand-r2p1" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, pl35x_nand_of_match);
+
+static struct platform_driver pl35x_nandc_driver = {
+	.probe = pl35x_nand_probe,
+	.remove	= pl35x_nand_remove,
+	.driver = {
+		.name = PL35X_NANDC_DRIVER_NAME,
+		.of_match_table = pl35x_nand_of_match,
+	},
+};
+module_platform_driver(pl35x_nandc_driver);
+
+MODULE_AUTHOR("Xilinx, Inc.");
+MODULE_ALIAS("platform:" PL35X_NANDC_DRIVER_NAME);
+MODULE_DESCRIPTION("ARM PL35X NAND controller driver");
+MODULE_LICENSE("GPL");
-- 
2.27.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 33+ messages in thread

* Re: [PATCH v23 17/18] dt-bindings: mtd: pl353-nand: Describe this hardware controller
  2021-06-10  8:20 ` [PATCH v23 17/18] dt-bindings: mtd: pl353-nand: Describe this hardware controller Miquel Raynal
@ 2021-06-10  8:48   ` Krzysztof Kozlowski
  2021-06-10  8:56     ` Miquel Raynal
  2021-06-10 15:49   ` Rob Herring
  2021-06-11 19:01   ` Miquel Raynal
  2 siblings, 1 reply; 33+ messages in thread
From: Krzysztof Kozlowski @ 2021-06-10  8:48 UTC (permalink / raw)
  To: Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
	Tudor Ambarus, linux-mtd, Rob Herring, devicetree
  Cc: Michal Simek, Naga Sureshkumar Relli, Amit Kumar Mahapatra,
	Thomas Petazzoni, linux-arm-kernel, linux-kernel, helmut.grohne,
	Srinivas Goud, Siva Durga Prasad Paladugu

On 10/06/2021 10:20, Miquel Raynal wrote:
> Add a yaml description of this NAND controller which is described as a
> subnode of the SMC bus.
> 
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> ---
>  .../bindings/mtd/arm,pl353-nand-r2p1.yaml     | 53 +++++++++++++++++++
>  1 file changed, 53 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.yaml
> 
> diff --git a/Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.yaml b/Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.yaml
> new file mode 100644
> index 000000000000..5f126bb9b202
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.yaml
> @@ -0,0 +1,53 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mtd/arm,pl353-nand-r2p1.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: PL353 NAND Controller device tree bindings
> +
> +allOf:
> +  - $ref: "nand-controller.yaml"
> +
> +maintainers:
> +  - Miquel Raynal <miquel.raynal@bootlin.com>
> +  - Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
> +
> +properties:
> +  compatible:
> +    items:

I think you can skip the "items" here and leave only "const: foo".

Best regards,
Krzysztof

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 33+ messages in thread

* Re: [PATCH v23 17/18] dt-bindings: mtd: pl353-nand: Describe this hardware controller
  2021-06-10  8:48   ` Krzysztof Kozlowski
@ 2021-06-10  8:56     ` Miquel Raynal
  2021-06-10 15:48       ` Rob Herring
  0 siblings, 1 reply; 33+ messages in thread
From: Miquel Raynal @ 2021-06-10  8:56 UTC (permalink / raw)
  To: Krzysztof Kozlowski
  Cc: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus,
	linux-mtd, Rob Herring, devicetree, Michal Simek,
	Naga Sureshkumar Relli, Amit Kumar Mahapatra, Thomas Petazzoni,
	linux-arm-kernel, linux-kernel, helmut.grohne, Srinivas Goud,
	Siva Durga Prasad Paladugu

Hi Krzysztof,

Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> wrote on Thu,
10 Jun 2021 10:48:16 +0200:

> On 10/06/2021 10:20, Miquel Raynal wrote:
> > Add a yaml description of this NAND controller which is described as a
> > subnode of the SMC bus.
> > 
> > Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> > ---
> >  .../bindings/mtd/arm,pl353-nand-r2p1.yaml     | 53 +++++++++++++++++++
> >  1 file changed, 53 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.yaml b/Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.yaml
> > new file mode 100644
> > index 000000000000..5f126bb9b202
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.yaml
> > @@ -0,0 +1,53 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/mtd/arm,pl353-nand-r2p1.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: PL353 NAND Controller device tree bindings
> > +
> > +allOf:
> > +  - $ref: "nand-controller.yaml"
> > +
> > +maintainers:
> > +  - Miquel Raynal <miquel.raynal@bootlin.com>
> > +  - Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
> > +
> > +properties:
> > +  compatible:
> > +    items:  
> 
> I think you can skip the "items" here and leave only "const: foo".

Crap, I missed that one, you're right. I'll wait a bit for Rob's
feedback and eventually fix it when applying or resend (hopefully) only
the NAND bits.

Thanks,
Miquèl

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 33+ messages in thread

* Re: [PATCH v23 00/18] ARM Primecell PL35x support
  2021-06-10  8:20 [PATCH v23 00/18] ARM Primecell PL35x support Miquel Raynal
                   ` (17 preceding siblings ...)
  2021-06-10  8:20 ` [PATCH v23 18/18] mtd: rawnand: pl353: Add support for the ARM PL353 SMC NAND controller Miquel Raynal
@ 2021-06-10 15:21 ` Krzysztof Kozlowski
  2021-06-10 15:24 ` Krzysztof Kozlowski
  2021-06-10 21:09 ` (subset) " Krzysztof Kozlowski
  20 siblings, 0 replies; 33+ messages in thread
From: Krzysztof Kozlowski @ 2021-06-10 15:21 UTC (permalink / raw)
  To: Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
	Tudor Ambarus, linux-mtd, Rob Herring, devicetree
  Cc: Michal Simek, Naga Sureshkumar Relli, Amit Kumar Mahapatra,
	Thomas Petazzoni, linux-arm-kernel, linux-kernel, helmut.grohne,
	Srinivas Goud, Siva Durga Prasad Paladugu

On 10/06/2021 10:20, Miquel Raynal wrote:
> Hello,
> 
> I am taking over Naga's series, here are the major changes:
> * Cleaning of the SMC bus binding file (and yaml conversion)
> * Superficial cleaning and great simplification of the SMC bus driver
> * Addition of a yaml file describing the NAND controller
> * Full rework of the NAND controller driver. JFFS2 and UBIFS not tested
>   yet, only bare test tools have been used to proove basic correctness
>   of the helpers.
> * Addition of a couple of MAINTAINERS entries.
> 
> A Github branch named pl353 is available on my repository:
> https://github.com/miquelraynal/linux/
> 
> Thanks,
> Miquèl
> 
> Changes in v23:
> - Collected Naga Acked-by's.
> - Used const instead of single enum entries in the bindings.
> - Dropped the address-cells/size-cells superfluous definitions out of
>   the NAND controller binding.
> - Enhanced the SMC reg property description to mention that the various
>   CS are described in the ranges property.
> - Fixed the SMC child nodes regex to match Rob's requirements.
> 

I'll apply the memory patches here - dt-bindings which has Rob's ack and
driver changes. It's getting too late in the cycle and soon arm-soc
won't accept such big patchset.


Best regards,
Krzysztof

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 33+ messages in thread

* Re: [PATCH v23 00/18] ARM Primecell PL35x support
  2021-06-10  8:20 [PATCH v23 00/18] ARM Primecell PL35x support Miquel Raynal
                   ` (18 preceding siblings ...)
  2021-06-10 15:21 ` [PATCH v23 00/18] ARM Primecell PL35x support Krzysztof Kozlowski
@ 2021-06-10 15:24 ` Krzysztof Kozlowski
  2021-06-10 21:09 ` (subset) " Krzysztof Kozlowski
  20 siblings, 0 replies; 33+ messages in thread
From: Krzysztof Kozlowski @ 2021-06-10 15:24 UTC (permalink / raw)
  To: Rob Herring, devicetree, Miquel Raynal, Tudor Ambarus, linux-mtd,
	Vignesh Raghavendra, Richard Weinberger
  Cc: Krzysztof Kozlowski, Siva Durga Prasad Paladugu,
	Amit Kumar Mahapatra, Thomas Petazzoni, linux-kernel,
	Naga Sureshkumar Relli, helmut.grohne, Michal Simek,
	Srinivas Goud, linux-arm-kernel

On Thu, 10 Jun 2021 10:20:22 +0200, Miquel Raynal wrote:
> I am taking over Naga's series, here are the major changes:
> * Cleaning of the SMC bus binding file (and yaml conversion)
> * Superficial cleaning and great simplification of the SMC bus driver
> * Addition of a yaml file describing the NAND controller
> * Full rework of the NAND controller driver. JFFS2 and UBIFS not tested
>   yet, only bare test tools have been used to proove basic correctness
>   of the helpers.
> * Addition of a couple of MAINTAINERS entries.
> 
> [...]

Applied, thanks!

[01/18] dt-binding: memory: pl353-smc: Rephrase the binding
        commit: a70eb9165e2a0f2867f0eb78f12665893d135ee1
[02/18] dt-binding: memory: pl353-smc: Document the range property
        commit: 386783ea6d9f21374cb11e0e8b8b4bd9770ef485
[03/18] dt-binding: memory: pl353-smc: Drop the partitioning section
        commit: f1d19f7400132b45cab4ee60e974150699fe28b5
[04/18] dt-binding: memory: pl353-smc: Describe the child reg property
        commit: 6c74a55e1d791be9758d9f23b1c5375854949188
[05/18] dt-binding: memory: pl353-smc: Fix the example syntax and style
        commit: 540148ce3455f0dc4fac9414ac12337ae0ab7cf2
[06/18] dt-binding: memory: pl353-smc: Drop unsupported nodes from the example
        commit: 29c6d09f39591eb3ea5e8e64ed42b28b9ae31f99
[07/18] dt-binding: memory: pl353-smc: Fix the NAND controller node in the example
        commit: 9af22e1169dd6b0f498fa8f9bff7c44f721b1b20

8-9: still acks needed

[10/18] memory: pl353-smc: Fix style
        commit: 62584c870cba9c84f08dadc083c6359dc41df678
[11/18] memory: pl353-smc: Rename goto labels
        commit: edd84c4256e2a2c756a241728b8c31e14bbed2f7
[12/18] memory: pl353-smc: Let lower level controller drivers handle inits
        commit: 493db2b05d9217da5889840ee31121856627e3c6
[13/18] memory: pl353-smc: Avoid useless acronyms in descriptions
        commit: 9d7bb4493acfb7a131230e7785e7416de50b28b6
[14/18] memory: pl353-smc: Declare variables following a reverse christmas tree order
        commit: df6c2646d0e459ea6aa1d2caff683cc75df63b31
[15/18] MAINTAINERS: Add PL353 SMC entry
        commit: 813d52799ad28579da3ed5a88c1bacd8069dd172

Best regards,
-- 
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 33+ messages in thread

* Re: [PATCH v23 09/18] dt-binding: memory: pl353-smc: Convert to yaml
  2021-06-10  8:20 ` [PATCH v23 09/18] dt-binding: memory: pl353-smc: Convert to yaml Miquel Raynal
@ 2021-06-10 15:44   ` Rob Herring
  0 siblings, 0 replies; 33+ messages in thread
From: Rob Herring @ 2021-06-10 15:44 UTC (permalink / raw)
  To: Miquel Raynal
  Cc: Amit Kumar Mahapatra, Vignesh Raghavendra, Krzysztof Kozlowski,
	Thomas Petazzoni, Naga Sureshkumar Relli, helmut.grohne,
	Siva Durga Prasad Paladugu, Tudor Ambarus, Rob Herring,
	Michal Simek, linux-arm-kernel, Srinivas Goud, devicetree,
	linux-kernel, Richard Weinberger, linux-mtd

On Thu, 10 Jun 2021 10:20:31 +0200, Miquel Raynal wrote:
> Convert this binding file to yaml schema.
> 
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> ---
>  .../memory-controllers/arm,pl353-smc.yaml     | 131 ++++++++++++++++++
>  .../bindings/memory-controllers/pl353-smc.txt |  45 ------
>  2 files changed, 131 insertions(+), 45 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/memory-controllers/arm,pl353-smc.yaml
>  delete mode 100644 Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
> 

Reviewed-by: Rob Herring <robh@kernel.org>

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 33+ messages in thread

* Re: [PATCH v23 17/18] dt-bindings: mtd: pl353-nand: Describe this hardware controller
  2021-06-10  8:56     ` Miquel Raynal
@ 2021-06-10 15:48       ` Rob Herring
  0 siblings, 0 replies; 33+ messages in thread
From: Rob Herring @ 2021-06-10 15:48 UTC (permalink / raw)
  To: Miquel Raynal
  Cc: Krzysztof Kozlowski, Richard Weinberger, Vignesh Raghavendra,
	Tudor Ambarus, linux-mtd, devicetree, Michal Simek,
	Naga Sureshkumar Relli, Amit Kumar Mahapatra, Thomas Petazzoni,
	linux-arm-kernel, linux-kernel, helmut.grohne, Srinivas Goud,
	Siva Durga Prasad Paladugu

On Thu, Jun 10, 2021 at 10:56:53AM +0200, Miquel Raynal wrote:
> Hi Krzysztof,
> 
> Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> wrote on Thu,
> 10 Jun 2021 10:48:16 +0200:
> 
> > On 10/06/2021 10:20, Miquel Raynal wrote:
> > > Add a yaml description of this NAND controller which is described as a
> > > subnode of the SMC bus.
> > > 
> > > Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> > > ---
> > >  .../bindings/mtd/arm,pl353-nand-r2p1.yaml     | 53 +++++++++++++++++++
> > >  1 file changed, 53 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.yaml
> > > 
> > > diff --git a/Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.yaml b/Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.yaml
> > > new file mode 100644
> > > index 000000000000..5f126bb9b202
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.yaml
> > > @@ -0,0 +1,53 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/mtd/arm,pl353-nand-r2p1.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: PL353 NAND Controller device tree bindings
> > > +
> > > +allOf:
> > > +  - $ref: "nand-controller.yaml"
> > > +
> > > +maintainers:
> > > +  - Miquel Raynal <miquel.raynal@bootlin.com>
> > > +  - Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
> > > +
> > > +properties:
> > > +  compatible:
> > > +    items:  
> > 
> > I think you can skip the "items" here and leave only "const: foo".
> 
> Crap, I missed that one, you're right. I'll wait a bit for Rob's
> feedback and eventually fix it when applying or resend (hopefully) only
> the NAND bits.

Either way is fine.

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 33+ messages in thread

* Re: [PATCH v23 17/18] dt-bindings: mtd: pl353-nand: Describe this hardware controller
  2021-06-10  8:20 ` [PATCH v23 17/18] dt-bindings: mtd: pl353-nand: Describe this hardware controller Miquel Raynal
  2021-06-10  8:48   ` Krzysztof Kozlowski
@ 2021-06-10 15:49   ` Rob Herring
  2021-06-11 19:01   ` Miquel Raynal
  2 siblings, 0 replies; 33+ messages in thread
From: Rob Herring @ 2021-06-10 15:49 UTC (permalink / raw)
  To: Miquel Raynal
  Cc: Tudor Ambarus, Rob Herring, Krzysztof Kozlowski, helmut.grohne,
	Amit Kumar Mahapatra, Siva Durga Prasad Paladugu,
	linux-arm-kernel, Srinivas Goud, Thomas Petazzoni, linux-kernel,
	devicetree, Naga Sureshkumar Relli, linux-mtd,
	Richard Weinberger, Michal Simek, Vignesh Raghavendra

On Thu, 10 Jun 2021 10:20:39 +0200, Miquel Raynal wrote:
> Add a yaml description of this NAND controller which is described as a
> subnode of the SMC bus.
> 
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> ---
>  .../bindings/mtd/arm,pl353-nand-r2p1.yaml     | 53 +++++++++++++++++++
>  1 file changed, 53 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 33+ messages in thread

* Re: [PATCH v23 08/18] dt-binding: memory: pl353-smc: Enhance the description of the reg property
  2021-06-10  8:20 ` [PATCH v23 08/18] dt-binding: memory: pl353-smc: Enhance the description of the reg property Miquel Raynal
@ 2021-06-10 15:53   ` Rob Herring
  2021-06-10 16:01     ` Miquel Raynal
  0 siblings, 1 reply; 33+ messages in thread
From: Rob Herring @ 2021-06-10 15:53 UTC (permalink / raw)
  To: Miquel Raynal
  Cc: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus,
	linux-mtd, devicetree, Krzysztof Kozlowski, Michal Simek,
	Naga Sureshkumar Relli, Amit Kumar Mahapatra, Thomas Petazzoni,
	linux-arm-kernel, linux-kernel, helmut.grohne, Srinivas Goud,
	Siva Durga Prasad Paladugu

On Thu, Jun 10, 2021 at 10:20:30AM +0200, Miquel Raynal wrote:
> The SMC bus controller features several register sets. The one pointed
> by the reg property is for the SMC configuration (impacts the
> sub-controllers configuration), while the others are meant to be used to
> send regular cycles on the memory bus (eg. CMD, ADDR, DATA for a NAND
> device). Detail this a little bit for the sake of clarity.
> 
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> ---
>  .../devicetree/bindings/memory-controllers/pl353-smc.txt       | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
> index ecd46856f139..ba6a5426f62b 100644
> --- a/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
> +++ b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
> @@ -5,7 +5,8 @@ of memory interfaces: NAND and memory mapped interfaces (such as SRAM or NOR).
>  
>  Required properties:
>  - compatible		: Should be "arm,pl353-smc-r2p1", "arm,primecell".
> -- reg			: Controller registers map and length.
> +- reg			: SMC controller and sub-controllers configuration
> +			  registers.

I think you could just drop this patch. Otherwise, this doesn't match 
what's now in the yaml file.

Rob

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 33+ messages in thread

* Re: [PATCH v23 08/18] dt-binding: memory: pl353-smc: Enhance the description of the reg property
  2021-06-10 15:53   ` Rob Herring
@ 2021-06-10 16:01     ` Miquel Raynal
  2021-06-10 21:12       ` Krzysztof Kozlowski
  0 siblings, 1 reply; 33+ messages in thread
From: Miquel Raynal @ 2021-06-10 16:01 UTC (permalink / raw)
  To: Rob Herring
  Cc: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus,
	linux-mtd, devicetree, Krzysztof Kozlowski, Michal Simek,
	Naga Sureshkumar Relli, Amit Kumar Mahapatra, Thomas Petazzoni,
	linux-arm-kernel, linux-kernel, helmut.grohne, Srinivas Goud,
	Siva Durga Prasad Paladugu

Hi Rob, Krzysztof,

Rob Herring <robh@kernel.org> wrote on Thu, 10 Jun 2021 10:53:45 -0500:

> On Thu, Jun 10, 2021 at 10:20:30AM +0200, Miquel Raynal wrote:
> > The SMC bus controller features several register sets. The one pointed
> > by the reg property is for the SMC configuration (impacts the
> > sub-controllers configuration), while the others are meant to be used to
> > send regular cycles on the memory bus (eg. CMD, ADDR, DATA for a NAND
> > device). Detail this a little bit for the sake of clarity.
> > 
> > Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> > ---
> >  .../devicetree/bindings/memory-controllers/pl353-smc.txt       | 3 ++-
> >  1 file changed, 2 insertions(+), 1 deletion(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
> > index ecd46856f139..ba6a5426f62b 100644
> > --- a/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
> > +++ b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
> > @@ -5,7 +5,8 @@ of memory interfaces: NAND and memory mapped interfaces (such as SRAM or NOR).
> >  
> >  Required properties:
> >  - compatible		: Should be "arm,pl353-smc-r2p1", "arm,primecell".
> > -- reg			: Controller registers map and length.
> > +- reg			: SMC controller and sub-controllers configuration
> > +			  registers.  
> 
> I think you could just drop this patch. Otherwise, this doesn't match 
> what's now in the yaml file.

Fine.

Krzysztof, if it's still time you can just take patch 9 which Rob
just acked and forget about this one. I think we'll be good. Otherwise
that will be for the next MW ;)

Thanks,
Miquèl

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 33+ messages in thread

* Re: (subset) [PATCH v23 00/18] ARM Primecell PL35x support
  2021-06-10  8:20 [PATCH v23 00/18] ARM Primecell PL35x support Miquel Raynal
                   ` (19 preceding siblings ...)
  2021-06-10 15:24 ` Krzysztof Kozlowski
@ 2021-06-10 21:09 ` Krzysztof Kozlowski
  20 siblings, 0 replies; 33+ messages in thread
From: Krzysztof Kozlowski @ 2021-06-10 21:09 UTC (permalink / raw)
  To: Vignesh Raghavendra, Rob Herring, Tudor Ambarus,
	Richard Weinberger, devicetree, linux-mtd, Miquel Raynal
  Cc: Krzysztof Kozlowski, Michal Simek, Srinivas Goud,
	linux-arm-kernel, Amit Kumar Mahapatra, Naga Sureshkumar Relli,
	helmut.grohne, Siva Durga Prasad Paladugu, Thomas Petazzoni,
	linux-kernel

On Thu, 10 Jun 2021 10:20:22 +0200, Miquel Raynal wrote:
> I am taking over Naga's series, here are the major changes:
> * Cleaning of the SMC bus binding file (and yaml conversion)
> * Superficial cleaning and great simplification of the SMC bus driver
> * Addition of a yaml file describing the NAND controller
> * Full rework of the NAND controller driver. JFFS2 and UBIFS not tested
>   yet, only bare test tools have been used to proove basic correctness
>   of the helpers.
> * Addition of a couple of MAINTAINERS entries.
> 
> [...]

Applied, thanks!

[09/18] dt-binding: memory: pl353-smc: Convert to yaml
        commit: d3d0e1e857110a2f8147b1aa3a045b1fccc1e7c3

Best regards,
-- 
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 33+ messages in thread

* Re: [PATCH v23 08/18] dt-binding: memory: pl353-smc: Enhance the description of the reg property
  2021-06-10 16:01     ` Miquel Raynal
@ 2021-06-10 21:12       ` Krzysztof Kozlowski
  0 siblings, 0 replies; 33+ messages in thread
From: Krzysztof Kozlowski @ 2021-06-10 21:12 UTC (permalink / raw)
  To: Miquel Raynal, Rob Herring
  Cc: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus,
	linux-mtd, devicetree, Michal Simek, Naga Sureshkumar Relli,
	Amit Kumar Mahapatra, Thomas Petazzoni, linux-arm-kernel,
	linux-kernel, helmut.grohne, Srinivas Goud,
	Siva Durga Prasad Paladugu

On 10/06/2021 18:01, Miquel Raynal wrote:
> Hi Rob, Krzysztof,
> 
> Rob Herring <robh@kernel.org> wrote on Thu, 10 Jun 2021 10:53:45 -0500:
> 
>> On Thu, Jun 10, 2021 at 10:20:30AM +0200, Miquel Raynal wrote:
>>> The SMC bus controller features several register sets. The one pointed
>>> by the reg property is for the SMC configuration (impacts the
>>> sub-controllers configuration), while the others are meant to be used to
>>> send regular cycles on the memory bus (eg. CMD, ADDR, DATA for a NAND
>>> device). Detail this a little bit for the sake of clarity.
>>>
>>> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
>>> ---
>>>  .../devicetree/bindings/memory-controllers/pl353-smc.txt       | 3 ++-
>>>  1 file changed, 2 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
>>> index ecd46856f139..ba6a5426f62b 100644
>>> --- a/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
>>> +++ b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
>>> @@ -5,7 +5,8 @@ of memory interfaces: NAND and memory mapped interfaces (such as SRAM or NOR).
>>>  
>>>  Required properties:
>>>  - compatible		: Should be "arm,pl353-smc-r2p1", "arm,primecell".
>>> -- reg			: Controller registers map and length.
>>> +- reg			: SMC controller and sub-controllers configuration
>>> +			  registers.  
>>
>> I think you could just drop this patch. Otherwise, this doesn't match 
>> what's now in the yaml file.
> 
> Fine.
> 
> Krzysztof, if it's still time you can just take patch 9 which Rob
> just acked and forget about this one. I think we'll be good. Otherwise
> that will be for the next MW ;)

I skipped this one but took dtschema (9/18) so it should be in
tomorrow's linux-next.

Best regards,
Krzysztof

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 33+ messages in thread

* Re: [PATCH v23 18/18] mtd: rawnand: pl353: Add support for the ARM PL353 SMC NAND controller
  2021-06-10  8:20 ` [PATCH v23 18/18] mtd: rawnand: pl353: Add support for the ARM PL353 SMC NAND controller Miquel Raynal
@ 2021-06-11 19:01   ` Miquel Raynal
  0 siblings, 0 replies; 33+ messages in thread
From: Miquel Raynal @ 2021-06-11 19:01 UTC (permalink / raw)
  To: Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
	Tudor Ambarus, linux-mtd, Rob Herring, devicetree,
	Krzysztof Kozlowski
  Cc: Michal Simek, Naga Sureshkumar Relli, Amit Kumar Mahapatra,
	Thomas Petazzoni, linux-arm-kernel, linux-kernel, helmut.grohne,
	Srinivas Goud, Siva Durga Prasad Paladugu, Michael Walle

On Thu, 2021-06-10 at 08:20:40 UTC, Miquel Raynal wrote:
> This hardware controller is embedded in XilinX Zynq-7000 SoCs and has
> partial support for Hamming ECC correction.
> 
> This work is inspired from the original contributions of Punnaiah
> Choudary Kalluri and Naga Sureshkumar Relli.
> 
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> Tested-by: Michael Walle <michael@walle.cc> [on zynq-7000]

Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next.

Miquel

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 33+ messages in thread

* Re: [PATCH v23 17/18] dt-bindings: mtd: pl353-nand: Describe this hardware controller
  2021-06-10  8:20 ` [PATCH v23 17/18] dt-bindings: mtd: pl353-nand: Describe this hardware controller Miquel Raynal
  2021-06-10  8:48   ` Krzysztof Kozlowski
  2021-06-10 15:49   ` Rob Herring
@ 2021-06-11 19:01   ` Miquel Raynal
  2 siblings, 0 replies; 33+ messages in thread
From: Miquel Raynal @ 2021-06-11 19:01 UTC (permalink / raw)
  To: Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
	Tudor Ambarus, linux-mtd, Rob Herring, devicetree,
	Krzysztof Kozlowski
  Cc: Michal Simek, Naga Sureshkumar Relli, Amit Kumar Mahapatra,
	Thomas Petazzoni, linux-arm-kernel, linux-kernel, helmut.grohne,
	Srinivas Goud, Siva Durga Prasad Paladugu

On Thu, 2021-06-10 at 08:20:39 UTC, Miquel Raynal wrote:
> Add a yaml description of this NAND controller which is described as a
> subnode of the SMC bus.
> 
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> Reviewed-by: Rob Herring <robh@kernel.org>

Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next.

Miquel

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 33+ messages in thread

* Re: [PATCH v23 16/18] MAINTAINERS: Add PL353 NAND controller entry
  2021-06-10  8:20 ` [PATCH v23 16/18] MAINTAINERS: Add PL353 NAND controller entry Miquel Raynal
@ 2021-06-11 19:02   ` Miquel Raynal
  0 siblings, 0 replies; 33+ messages in thread
From: Miquel Raynal @ 2021-06-11 19:02 UTC (permalink / raw)
  To: Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
	Tudor Ambarus, linux-mtd, Rob Herring, devicetree,
	Krzysztof Kozlowski
  Cc: Michal Simek, Naga Sureshkumar Relli, Amit Kumar Mahapatra,
	Thomas Petazzoni, linux-arm-kernel, linux-kernel, helmut.grohne,
	Srinivas Goud, Siva Durga Prasad Paladugu,
	Naga Sureshkumar Relli

On Thu, 2021-06-10 at 08:20:38 UTC, Miquel Raynal wrote:
> Add Naga from Xilinx and myself responsible of this driver.
> 
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> Acked-by: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>

Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next.

Miquel

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 33+ messages in thread

end of thread, other threads:[~2021-06-11 19:47 UTC | newest]

Thread overview: 33+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-06-10  8:20 [PATCH v23 00/18] ARM Primecell PL35x support Miquel Raynal
2021-06-10  8:20 ` [PATCH v23 01/18] dt-binding: memory: pl353-smc: Rephrase the binding Miquel Raynal
2021-06-10  8:20 ` [PATCH v23 02/18] dt-binding: memory: pl353-smc: Document the range property Miquel Raynal
2021-06-10  8:20 ` [PATCH v23 03/18] dt-binding: memory: pl353-smc: Drop the partitioning section Miquel Raynal
2021-06-10  8:20 ` [PATCH v23 04/18] dt-binding: memory: pl353-smc: Describe the child reg property Miquel Raynal
2021-06-10  8:20 ` [PATCH v23 05/18] dt-binding: memory: pl353-smc: Fix the example syntax and style Miquel Raynal
2021-06-10  8:20 ` [PATCH v23 06/18] dt-binding: memory: pl353-smc: Drop unsupported nodes from the example Miquel Raynal
2021-06-10  8:20 ` [PATCH v23 07/18] dt-binding: memory: pl353-smc: Fix the NAND controller node in " Miquel Raynal
2021-06-10  8:20 ` [PATCH v23 08/18] dt-binding: memory: pl353-smc: Enhance the description of the reg property Miquel Raynal
2021-06-10 15:53   ` Rob Herring
2021-06-10 16:01     ` Miquel Raynal
2021-06-10 21:12       ` Krzysztof Kozlowski
2021-06-10  8:20 ` [PATCH v23 09/18] dt-binding: memory: pl353-smc: Convert to yaml Miquel Raynal
2021-06-10 15:44   ` Rob Herring
2021-06-10  8:20 ` [PATCH v23 10/18] memory: pl353-smc: Fix style Miquel Raynal
2021-06-10  8:20 ` [PATCH v23 11/18] memory: pl353-smc: Rename goto labels Miquel Raynal
2021-06-10  8:20 ` [PATCH v23 12/18] memory: pl353-smc: Let lower level controller drivers handle inits Miquel Raynal
2021-06-10  8:20 ` [PATCH v23 13/18] memory: pl353-smc: Avoid useless acronyms in descriptions Miquel Raynal
2021-06-10  8:20 ` [PATCH v23 14/18] memory: pl353-smc: Declare variables following a reverse christmas tree order Miquel Raynal
2021-06-10  8:20 ` [PATCH v23 15/18] MAINTAINERS: Add PL353 SMC entry Miquel Raynal
2021-06-10  8:20 ` [PATCH v23 16/18] MAINTAINERS: Add PL353 NAND controller entry Miquel Raynal
2021-06-11 19:02   ` Miquel Raynal
2021-06-10  8:20 ` [PATCH v23 17/18] dt-bindings: mtd: pl353-nand: Describe this hardware controller Miquel Raynal
2021-06-10  8:48   ` Krzysztof Kozlowski
2021-06-10  8:56     ` Miquel Raynal
2021-06-10 15:48       ` Rob Herring
2021-06-10 15:49   ` Rob Herring
2021-06-11 19:01   ` Miquel Raynal
2021-06-10  8:20 ` [PATCH v23 18/18] mtd: rawnand: pl353: Add support for the ARM PL353 SMC NAND controller Miquel Raynal
2021-06-11 19:01   ` Miquel Raynal
2021-06-10 15:21 ` [PATCH v23 00/18] ARM Primecell PL35x support Krzysztof Kozlowski
2021-06-10 15:24 ` Krzysztof Kozlowski
2021-06-10 21:09 ` (subset) " Krzysztof Kozlowski

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).