* linux-next: build failure after merge of the final tree (tty tree related)
@ 2012-07-20 5:02 Stephen Rothwell
2012-07-25 22:47 ` Greg KH
2012-07-25 22:52 ` Stephen Rothwell
0 siblings, 2 replies; 37+ messages in thread
From: Stephen Rothwell @ 2012-07-20 5:02 UTC (permalink / raw)
To: Greg KH; +Cc: linux-next, linux-kernel, Alan Cox
[-- Attachment #1: Type: text/plain, Size: 2084 bytes --]
Hi all,
After merging the final tree, today's linux-next build (powerpc
allyesconfig) failed like this:
drivers/usb/serial/console.c: In function 'usb_console_setup':
drivers/usb/serial/console.c:168:16: error: invalid type argument of '->' (have 'struct ktermios')
drivers/usb/serial/console.c:169:4: error: incompatible type for argument 1 of 'tty_termios_encode_baud_rate'
include/linux/tty.h:449:13: note: expected 'struct ktermios *' but argument is of type 'struct ktermios'
Caused by commit adc8d746caa6 ("tty: move the termios object into the
tty"). Hopefully this is the last of them.
I have added the following fix patch for today:
From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Fri, 20 Jul 2012 14:58:31 +1000
Subject: [PATCH] tty: fix up usb serial console for termios change.
fixes these errors:
drivers/usb/serial/console.c: In function 'usb_console_setup':
drivers/usb/serial/console.c:168:16: error: invalid type argument of '->' (have 'struct ktermios')
drivers/usb/serial/console.c:169:4: error: incompatible type for argument 1 of 'tty_termios_encode_baud_rate'
include/linux/tty.h:449:13: note: expected 'struct ktermios *' but argument is of type 'struct ktermios'
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
---
drivers/usb/serial/console.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index b9cca6d..9a56428 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -165,8 +165,8 @@ static int usb_console_setup(struct console *co, char *options)
}
if (serial->type->set_termios) {
- tty->termios->c_cflag = cflag;
- tty_termios_encode_baud_rate(tty->termios, baud, baud);
+ tty->termios.c_cflag = cflag;
+ tty_termios_encode_baud_rate(&tty->termios, baud, baud);
memset(&dummy, 0, sizeof(struct ktermios));
serial->type->set_termios(tty, port, &dummy);
--
1.7.10.280.gaa39
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply related [flat|nested] 37+ messages in thread
* Re: linux-next: build failure after merge of the final tree (tty tree related)
2012-07-20 5:02 linux-next: build failure after merge of the final tree (tty tree related) Stephen Rothwell
@ 2012-07-25 22:47 ` Greg KH
2012-07-26 0:23 ` Alan Cox
2012-07-25 22:52 ` Stephen Rothwell
1 sibling, 1 reply; 37+ messages in thread
From: Greg KH @ 2012-07-25 22:47 UTC (permalink / raw)
To: Stephen Rothwell; +Cc: linux-next, linux-kernel, Alan Cox
On Fri, Jul 20, 2012 at 03:02:37PM +1000, Stephen Rothwell wrote:
> Hi all,
>
> After merging the final tree, today's linux-next build (powerpc
> allyesconfig) failed like this:
>
> drivers/usb/serial/console.c: In function 'usb_console_setup':
> drivers/usb/serial/console.c:168:16: error: invalid type argument of '->' (have 'struct ktermios')
> drivers/usb/serial/console.c:169:4: error: incompatible type for argument 1 of 'tty_termios_encode_baud_rate'
> include/linux/tty.h:449:13: note: expected 'struct ktermios *' but argument is of type 'struct ktermios'
>
> Caused by commit adc8d746caa6 ("tty: move the termios object into the
> tty"). Hopefully this is the last of them.
>
> I have added the following fix patch for today:
>
> From: Stephen Rothwell <sfr@canb.auug.org.au>
> Date: Fri, 20 Jul 2012 14:58:31 +1000
> Subject: [PATCH] tty: fix up usb serial console for termios change.
>
> fixes these errors:
>
> drivers/usb/serial/console.c: In function 'usb_console_setup':
> drivers/usb/serial/console.c:168:16: error: invalid type argument of '->' (have 'struct ktermios')
> drivers/usb/serial/console.c:169:4: error: incompatible type for argument 1 of 'tty_termios_encode_baud_rate'
> include/linux/tty.h:449:13: note: expected 'struct ktermios *' but argument is of type 'struct ktermios'
>
> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
> ---
> drivers/usb/serial/console.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
> index b9cca6d..9a56428 100644
> --- a/drivers/usb/serial/console.c
> +++ b/drivers/usb/serial/console.c
> @@ -165,8 +165,8 @@ static int usb_console_setup(struct console *co, char *options)
> }
>
> if (serial->type->set_termios) {
> - tty->termios->c_cflag = cflag;
> - tty_termios_encode_baud_rate(tty->termios, baud, baud);
> + tty->termios.c_cflag = cflag;
> + tty_termios_encode_baud_rate(&tty->termios, baud, baud);
> memset(&dummy, 0, sizeof(struct ktermios));
> serial->type->set_termios(tty, port, &dummy);
>
Alan, any objection to this?
greg k-h
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: linux-next: build failure after merge of the final tree (tty tree related)
2012-07-20 5:02 linux-next: build failure after merge of the final tree (tty tree related) Stephen Rothwell
2012-07-25 22:47 ` Greg KH
@ 2012-07-25 22:52 ` Stephen Rothwell
1 sibling, 0 replies; 37+ messages in thread
From: Stephen Rothwell @ 2012-07-25 22:52 UTC (permalink / raw)
To: Greg KH; +Cc: linux-next, linux-kernel, Alan Cox
[-- Attachment #1: Type: text/plain, Size: 2276 bytes --]
Hi Greg, Alan,
On Fri, 20 Jul 2012 15:02:37 +1000 Stephen Rothwell <sfr@canb.auug.org.au> wrote:
>
> After merging the final tree, today's linux-next build (powerpc
> allyesconfig) failed like this:
>
> drivers/usb/serial/console.c: In function 'usb_console_setup':
> drivers/usb/serial/console.c:168:16: error: invalid type argument of '->' (have 'struct ktermios')
> drivers/usb/serial/console.c:169:4: error: incompatible type for argument 1 of 'tty_termios_encode_baud_rate'
> include/linux/tty.h:449:13: note: expected 'struct ktermios *' but argument is of type 'struct ktermios'
>
> Caused by commit adc8d746caa6 ("tty: move the termios object into the
> tty"). Hopefully this is the last of them.
>
> I have added the following fix patch for today:
>
> From: Stephen Rothwell <sfr@canb.auug.org.au>
> Date: Fri, 20 Jul 2012 14:58:31 +1000
> Subject: [PATCH] tty: fix up usb serial console for termios change.
>
> fixes these errors:
>
> drivers/usb/serial/console.c: In function 'usb_console_setup':
> drivers/usb/serial/console.c:168:16: error: invalid type argument of '->' (have 'struct ktermios')
> drivers/usb/serial/console.c:169:4: error: incompatible type for argument 1 of 'tty_termios_encode_baud_rate'
> include/linux/tty.h:449:13: note: expected 'struct ktermios *' but argument is of type 'struct ktermios'
>
> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
> ---
> drivers/usb/serial/console.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
> index b9cca6d..9a56428 100644
> --- a/drivers/usb/serial/console.c
> +++ b/drivers/usb/serial/console.c
> @@ -165,8 +165,8 @@ static int usb_console_setup(struct console *co, char *options)
> }
>
> if (serial->type->set_termios) {
> - tty->termios->c_cflag = cflag;
> - tty_termios_encode_baud_rate(tty->termios, baud, baud);
> + tty->termios.c_cflag = cflag;
> + tty_termios_encode_baud_rate(&tty->termios, baud, baud);
> memset(&dummy, 0, sizeof(struct ktermios));
> serial->type->set_termios(tty, port, &dummy);
>
> --
> 1.7.10.280.gaa39
Ping?
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: linux-next: build failure after merge of the final tree (tty tree related)
2012-07-25 22:47 ` Greg KH
@ 2012-07-26 0:23 ` Alan Cox
0 siblings, 0 replies; 37+ messages in thread
From: Alan Cox @ 2012-07-26 0:23 UTC (permalink / raw)
To: Greg KH; +Cc: Stephen Rothwell, linux-next, linux-kernel
> > if (serial->type->set_termios) {
> > - tty->termios->c_cflag = cflag;
> > - tty_termios_encode_baud_rate(tty->termios,
> > baud, baud);
> > + tty->termios.c_cflag = cflag;
> > +
> > tty_termios_encode_baud_rate(&tty->termios, baud, baud);
> > memset(&dummy, 0, sizeof(struct ktermios));
> > serial->type->set_termios(tty, port, &dummy);
>
> Alan, any objection to this?
The fix looks correct to me.
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: linux-next: build failure after merge of the final tree (tty tree related)
2013-10-28 16:33 ` Greg KH
@ 2013-10-29 7:04 ` Stephen Rothwell
0 siblings, 0 replies; 37+ messages in thread
From: Stephen Rothwell @ 2013-10-29 7:04 UTC (permalink / raw)
To: Greg KH
Cc: Sören Brinkmann, linux-next, linux-kernel,
Lars-Peter Clausen, Suneel Garapati, Vlad Lungu
[-- Attachment #1: Type: text/plain, Size: 1413 bytes --]
Hi all,
On Mon, 28 Oct 2013 09:33:33 -0700 Greg KH <greg@kroah.com> wrote:
>
> On Mon, Oct 28, 2013 at 09:05:37AM -0700, Sören Brinkmann wrote:
> > On Tue, Oct 29, 2013 at 01:33:17AM +1100, Stephen Rothwell wrote:
> > >
> > > After merging the final tree, today's linux-next build (powerpc
> > > allyesconfig) failed like this:
> > >
> > > drivers/tty/serial/xilinx_uartps.c: In function 'xuartps_clk_notifier_cb':
> > > drivers/tty/serial/xilinx_uartps.c:436:7: error: 'PRE_RATE_CHANGE' undeclared (first use in this function)
> > > case PRE_RATE_CHANGE:
> > > ^
> > > drivers/tty/serial/xilinx_uartps.c:436:7: note: each undeclared identifier is reported only once for each function it appears in
> > > drivers/tty/serial/xilinx_uartps.c:446:36: error: dereferencing pointer to incomplete type
> > > if (!xuartps_calc_baud_divs(ndata->new_rate, xuartps->baud,
> > > ^
> > >
> > > Caused by commits in the tty tree.
> > >
> > > I have left this broken for today.
> >
> > I already sent a series to Greg which should fix the x86 build of the
> > tty tree. I think he didn't apply those patches yet.
>
> Yes, I have them, sorry, been traveling, will get to them later today...
As a temporary work around, I will disable xilinx_uartps in linux-next
today.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: linux-next: build failure after merge of the final tree (tty tree related)
2013-10-28 16:05 ` Sören Brinkmann
@ 2013-10-28 16:33 ` Greg KH
2013-10-29 7:04 ` Stephen Rothwell
0 siblings, 1 reply; 37+ messages in thread
From: Greg KH @ 2013-10-28 16:33 UTC (permalink / raw)
To: Sören Brinkmann
Cc: Stephen Rothwell, linux-next, linux-kernel, Lars-Peter Clausen,
Suneel Garapati, Vlad Lungu
On Mon, Oct 28, 2013 at 09:05:37AM -0700, Sören Brinkmann wrote:
> On Tue, Oct 29, 2013 at 01:33:17AM +1100, Stephen Rothwell wrote:
> > Hi all,
> >
> > After merging the final tree, today's linux-next build (powerpc
> > allyesconfig) failed like this:
> >
> > drivers/tty/serial/xilinx_uartps.c: In function 'xuartps_clk_notifier_cb':
> > drivers/tty/serial/xilinx_uartps.c:436:7: error: 'PRE_RATE_CHANGE' undeclared (first use in this function)
> > case PRE_RATE_CHANGE:
> > ^
> > drivers/tty/serial/xilinx_uartps.c:436:7: note: each undeclared identifier is reported only once for each function it appears in
> > drivers/tty/serial/xilinx_uartps.c:446:36: error: dereferencing pointer to incomplete type
> > if (!xuartps_calc_baud_divs(ndata->new_rate, xuartps->baud,
> > ^
> > drivers/tty/serial/xilinx_uartps.c:461:7: error: 'POST_RATE_CHANGE' undeclared (first use in this function)
> > case POST_RATE_CHANGE:
> > ^
> > drivers/tty/serial/xilinx_uartps.c:470:24: error: dereferencing pointer to incomplete type
> > port->uartclk = ndata->new_rate;
> > ^
> > drivers/tty/serial/xilinx_uartps.c:475:7: error: 'ABORT_RATE_CHANGE' undeclared (first use in this function)
> > case ABORT_RATE_CHANGE:
> > ^
> > drivers/tty/serial/xilinx_uartps.c: In function 'xuartps_probe':
> > drivers/tty/serial/xilinx_uartps.c:1385:2: error: implicit declaration of function 'clk_notifier_register' [-Werror=implicit-function-declaration]
> > if (clk_notifier_register(xuartps_data->refclk,
> > ^
> > drivers/tty/serial/xilinx_uartps.c:1418:2: error: implicit declaration of function 'clk_notifier_unregister' [-Werror=implicit-function-declaration]
> > clk_notifier_unregister(xuartps_data->refclk,
> > ^
> >
> > Caused by commits in the tty tree.
> >
> > I have left this broken for today.
>
> I already sent a series to Greg which should fix the x86 build of the
> tty tree. I think he didn't apply those patches yet.
Yes, I have them, sorry, been traveling, will get to them later today...
thanks,
greg k-h
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: linux-next: build failure after merge of the final tree (tty tree related)
2013-10-28 14:33 Stephen Rothwell
2013-10-28 14:49 ` Michal Simek
@ 2013-10-28 16:05 ` Sören Brinkmann
2013-10-28 16:33 ` Greg KH
1 sibling, 1 reply; 37+ messages in thread
From: Sören Brinkmann @ 2013-10-28 16:05 UTC (permalink / raw)
To: Stephen Rothwell
Cc: Greg KH, linux-next, linux-kernel, Lars-Peter Clausen,
Suneel Garapati, Vlad Lungu
On Tue, Oct 29, 2013 at 01:33:17AM +1100, Stephen Rothwell wrote:
> Hi all,
>
> After merging the final tree, today's linux-next build (powerpc
> allyesconfig) failed like this:
>
> drivers/tty/serial/xilinx_uartps.c: In function 'xuartps_clk_notifier_cb':
> drivers/tty/serial/xilinx_uartps.c:436:7: error: 'PRE_RATE_CHANGE' undeclared (first use in this function)
> case PRE_RATE_CHANGE:
> ^
> drivers/tty/serial/xilinx_uartps.c:436:7: note: each undeclared identifier is reported only once for each function it appears in
> drivers/tty/serial/xilinx_uartps.c:446:36: error: dereferencing pointer to incomplete type
> if (!xuartps_calc_baud_divs(ndata->new_rate, xuartps->baud,
> ^
> drivers/tty/serial/xilinx_uartps.c:461:7: error: 'POST_RATE_CHANGE' undeclared (first use in this function)
> case POST_RATE_CHANGE:
> ^
> drivers/tty/serial/xilinx_uartps.c:470:24: error: dereferencing pointer to incomplete type
> port->uartclk = ndata->new_rate;
> ^
> drivers/tty/serial/xilinx_uartps.c:475:7: error: 'ABORT_RATE_CHANGE' undeclared (first use in this function)
> case ABORT_RATE_CHANGE:
> ^
> drivers/tty/serial/xilinx_uartps.c: In function 'xuartps_probe':
> drivers/tty/serial/xilinx_uartps.c:1385:2: error: implicit declaration of function 'clk_notifier_register' [-Werror=implicit-function-declaration]
> if (clk_notifier_register(xuartps_data->refclk,
> ^
> drivers/tty/serial/xilinx_uartps.c:1418:2: error: implicit declaration of function 'clk_notifier_unregister' [-Werror=implicit-function-declaration]
> clk_notifier_unregister(xuartps_data->refclk,
> ^
>
> Caused by commits in the tty tree.
>
> I have left this broken for today.
I already sent a series to Greg which should fix the x86 build of the
tty tree. I think he didn't apply those patches yet.
Sören
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: linux-next: build failure after merge of the final tree (tty tree related)
2013-10-28 14:33 Stephen Rothwell
@ 2013-10-28 14:49 ` Michal Simek
2013-10-28 16:05 ` Sören Brinkmann
1 sibling, 0 replies; 37+ messages in thread
From: Michal Simek @ 2013-10-28 14:49 UTC (permalink / raw)
To: Stephen Rothwell
Cc: Greg KH, linux-next, linux-kernel, Soren Brinkmann,
Lars-Peter Clausen, Suneel Garapati, Vlad Lungu
[-- Attachment #1: Type: text/plain, Size: 2246 bytes --]
On 10/28/2013 03:33 PM, Stephen Rothwell wrote:
> Hi all,
>
> After merging the final tree, today's linux-next build (powerpc
> allyesconfig) failed like this:
>
> drivers/tty/serial/xilinx_uartps.c: In function 'xuartps_clk_notifier_cb':
> drivers/tty/serial/xilinx_uartps.c:436:7: error: 'PRE_RATE_CHANGE' undeclared (first use in this function)
> case PRE_RATE_CHANGE:
> ^
> drivers/tty/serial/xilinx_uartps.c:436:7: note: each undeclared identifier is reported only once for each function it appears in
> drivers/tty/serial/xilinx_uartps.c:446:36: error: dereferencing pointer to incomplete type
> if (!xuartps_calc_baud_divs(ndata->new_rate, xuartps->baud,
> ^
> drivers/tty/serial/xilinx_uartps.c:461:7: error: 'POST_RATE_CHANGE' undeclared (first use in this function)
> case POST_RATE_CHANGE:
> ^
> drivers/tty/serial/xilinx_uartps.c:470:24: error: dereferencing pointer to incomplete type
> port->uartclk = ndata->new_rate;
> ^
> drivers/tty/serial/xilinx_uartps.c:475:7: error: 'ABORT_RATE_CHANGE' undeclared (first use in this function)
> case ABORT_RATE_CHANGE:
> ^
> drivers/tty/serial/xilinx_uartps.c: In function 'xuartps_probe':
> drivers/tty/serial/xilinx_uartps.c:1385:2: error: implicit declaration of function 'clk_notifier_register' [-Werror=implicit-function-declaration]
> if (clk_notifier_register(xuartps_data->refclk,
> ^
> drivers/tty/serial/xilinx_uartps.c:1418:2: error: implicit declaration of function 'clk_notifier_unregister' [-Werror=implicit-function-declaration]
> clk_notifier_unregister(xuartps_data->refclk,
> ^
>
> Caused by commits in the tty tree.
>
> I have left this broken for today.
>
Soren: Please correct me if I am wrong.
But this should be fixed by:
"[PATCH 3/3] tty: xuartps: Fix build error when COMMON_CLK is not set"
Thanks,
Michal
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 263 bytes --]
^ permalink raw reply [flat|nested] 37+ messages in thread
* linux-next: build failure after merge of the final tree (tty tree related)
@ 2013-10-28 14:33 Stephen Rothwell
2013-10-28 14:49 ` Michal Simek
2013-10-28 16:05 ` Sören Brinkmann
0 siblings, 2 replies; 37+ messages in thread
From: Stephen Rothwell @ 2013-10-28 14:33 UTC (permalink / raw)
Cc: linux-next, linux-kernel, Soren Brinkmann, Lars-Peter Clausen,
Suneel Garapati, Vlad Lungu, Greg KH
[-- Attachment #1: Type: text/plain, Size: 1725 bytes --]
Hi all,
After merging the final tree, today's linux-next build (powerpc
allyesconfig) failed like this:
drivers/tty/serial/xilinx_uartps.c: In function 'xuartps_clk_notifier_cb':
drivers/tty/serial/xilinx_uartps.c:436:7: error: 'PRE_RATE_CHANGE' undeclared (first use in this function)
case PRE_RATE_CHANGE:
^
drivers/tty/serial/xilinx_uartps.c:436:7: note: each undeclared identifier is reported only once for each function it appears in
drivers/tty/serial/xilinx_uartps.c:446:36: error: dereferencing pointer to incomplete type
if (!xuartps_calc_baud_divs(ndata->new_rate, xuartps->baud,
^
drivers/tty/serial/xilinx_uartps.c:461:7: error: 'POST_RATE_CHANGE' undeclared (first use in this function)
case POST_RATE_CHANGE:
^
drivers/tty/serial/xilinx_uartps.c:470:24: error: dereferencing pointer to incomplete type
port->uartclk = ndata->new_rate;
^
drivers/tty/serial/xilinx_uartps.c:475:7: error: 'ABORT_RATE_CHANGE' undeclared (first use in this function)
case ABORT_RATE_CHANGE:
^
drivers/tty/serial/xilinx_uartps.c: In function 'xuartps_probe':
drivers/tty/serial/xilinx_uartps.c:1385:2: error: implicit declaration of function 'clk_notifier_register' [-Werror=implicit-function-declaration]
if (clk_notifier_register(xuartps_data->refclk,
^
drivers/tty/serial/xilinx_uartps.c:1418:2: error: implicit declaration of function 'clk_notifier_unregister' [-Werror=implicit-function-declaration]
clk_notifier_unregister(xuartps_data->refclk,
^
Caused by commits in the tty tree.
I have left this broken for today.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: linux-next: build failure after merge of the final tree (tty tree related)
2013-09-27 8:21 Stephen Rothwell
@ 2013-09-28 1:04 ` Greg KH
0 siblings, 0 replies; 37+ messages in thread
From: Greg KH @ 2013-09-28 1:04 UTC (permalink / raw)
To: Stephen Rothwell; +Cc: linux-next, linux-kernel, Heikki Krogerus
On Fri, Sep 27, 2013 at 06:21:17PM +1000, Stephen Rothwell wrote:
> Hi all,
>
> After merging the final tree, today's linux-next build (powerpc
> allyesconfig) failed like this:
>
> drivers/tty/serial/8250/8250_dw.c: In function 'dw8250_probe':
> drivers/tty/serial/8250/8250_dw.c:341:3: error: too many arguments to function 'dw8250_probe_acpi'
> err = dw8250_probe_acpi(&uart, data);
> ^
> drivers/tty/serial/8250/8250_dw.c:281:19: note: declared here
> static inline int dw8250_probe_acpi(struct uart_8250_port *up)
> ^
>
> Caused by commit fe95855539fd ("serial: 8250_dw: don't limit DMA support
> to ACPI") from the tty tree.
>
> I have reverted that commit for today (and commit 7fb8c56c7fa0 ("serial:
> 8250_dw: provide a filter for DMA channel detection") that depends on it).
Should now be fixed, thanks.
greg k-h
^ permalink raw reply [flat|nested] 37+ messages in thread
* linux-next: build failure after merge of the final tree (tty tree related)
@ 2013-09-27 8:21 Stephen Rothwell
2013-09-28 1:04 ` Greg KH
0 siblings, 1 reply; 37+ messages in thread
From: Stephen Rothwell @ 2013-09-27 8:21 UTC (permalink / raw)
To: Greg KH; +Cc: linux-next, linux-kernel, Heikki Krogerus
[-- Attachment #1: Type: text/plain, Size: 803 bytes --]
Hi all,
After merging the final tree, today's linux-next build (powerpc
allyesconfig) failed like this:
drivers/tty/serial/8250/8250_dw.c: In function 'dw8250_probe':
drivers/tty/serial/8250/8250_dw.c:341:3: error: too many arguments to function 'dw8250_probe_acpi'
err = dw8250_probe_acpi(&uart, data);
^
drivers/tty/serial/8250/8250_dw.c:281:19: note: declared here
static inline int dw8250_probe_acpi(struct uart_8250_port *up)
^
Caused by commit fe95855539fd ("serial: 8250_dw: don't limit DMA support
to ACPI") from the tty tree.
I have reverted that commit for today (and commit 7fb8c56c7fa0 ("serial:
8250_dw: provide a filter for DMA channel detection") that depends on it).
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 37+ messages in thread
* linux-next: build failure after merge of the final tree (tty tree related)
@ 2013-04-02 7:57 Stephen Rothwell
0 siblings, 0 replies; 37+ messages in thread
From: Stephen Rothwell @ 2013-04-02 7:57 UTC (permalink / raw)
To: Greg KH; +Cc: linux-next, linux-kernel, Chanho Min
[-- Attachment #1: Type: text/plain, Size: 1432 bytes --]
Hi all,
After merging the final tree, today's linux-next build (arm defconfig)
failed like this:
drivers/tty/serial/amba-pl011.c: In function 'pl011_rx_chars':
drivers/tty/serial/amba-pl011.c:1199:11: error: 'struct uart_amba_port' has no member named 'dmarx'
drivers/tty/serial/amba-pl011.c:1200:8: error: 'struct uart_amba_port' has no member named 'dmarx'
drivers/tty/serial/amba-pl011.c:1201:8: error: 'struct uart_amba_port' has no member named 'dmarx'
drivers/tty/serial/amba-pl011.c:1201:31: error: 'PL011_DMA_BUFFER_SIZE' undeclared (first use in this function)
drivers/tty/serial/amba-pl011.c:1201:31: note: each undeclared identifier is reported only once for each function it appears in
drivers/tty/serial/amba-pl011.c:1202:19: error: 'struct uart_amba_port' has no member named 'dmarx'
drivers/tty/serial/amba-pl011.c:1204:26: error: 'struct uart_amba_port' has no member named 'dmarx'
drivers/tty/serial/amba-pl011.c: In function 'pl011_set_termios':
drivers/tty/serial/amba-pl011.c:1671:9: error: 'struct uart_amba_port' has no member named 'dmarx'
drivers/tty/serial/amba-pl011.c:1672:6: error: 'struct uart_amba_port' has no member named 'dmarx'
Caused by commit cb06ff102e2d ("ARM: PL011: Add support for Rx DMA buffer
polling"). This build does not have CONFIG_DMA_ENGINE set.
I have reverted that commit for today.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: linux-next: build failure after merge of the final tree (tty tree related)
2012-12-13 23:38 ` Greg KH
@ 2012-12-14 0:11 ` Steven Rostedt
0 siblings, 0 replies; 37+ messages in thread
From: Steven Rostedt @ 2012-12-14 0:11 UTC (permalink / raw)
To: Greg KH; +Cc: Stephen Rothwell, linux-next, linux-kernel
On Thu, 2012-12-13 at 15:38 -0800, Greg KH wrote:
> Ugh, can someone send me a patch to forward to Linus to fix this please?
> Steven, how about fixing the problem properly?
Yeah, ugh, I should have sent the fix earlier :-(
I've just been hammering at bugs for the people that pay me ;-)
OK, I'll whip up a patch that should at least fix the issue for the time
being.
-- Steve
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: linux-next: build failure after merge of the final tree (tty tree related)
2012-12-13 23:32 ` Stephen Rothwell
@ 2012-12-13 23:38 ` Greg KH
2012-12-14 0:11 ` Steven Rostedt
0 siblings, 1 reply; 37+ messages in thread
From: Greg KH @ 2012-12-13 23:38 UTC (permalink / raw)
To: Stephen Rothwell, Steven Rostedt, linux-next, linux-kernel
On Fri, Dec 14, 2012 at 10:32:56AM +1100, Stephen Rothwell wrote:
> Hi Steve, Greg,
>
> On Tue, 27 Nov 2012 10:05:30 +1100 Stephen Rothwell <sfr@canb.auug.org.au> wrote:
> >
> > On Mon, 26 Nov 2012 09:35:12 -0500 Steven Rostedt <srostedt@redhat.com> wrote:
> > >
> > > On Tue, 2012-11-27 at 00:49 +1100, Stephen Rothwell wrote:
> > > >
> > > > After merging the final tree, today's linux-next build (powerpc
> > > > allyesconfig) failed like this:
> > > >
> > > > In file included from drivers/staging/sb105x/sb_pci_mp.c:1:0:
> > > > drivers/staging/sb105x/sb_pci_mp.h:22:25: fatal error: asm/segment.h: No such file or directory
> > >
> > > I haven't tested this with any other arch than x86. That said, what
> > > about this instead:
> > >
> > > > Caused by commit 68a81291ff66 ("staging: Add SystemBase Multi-2/PCI
> > > > driver").
> > > >
> > > > I have disabled this driver with this patch:
> > > >
> > > > From: Stephen Rothwell <sfr@canb.auug.org.au>
> > > > Date: Tue, 27 Nov 2012 00:45:07 +1100
> > > > Subject: [PATCH] disable the SB105X driver
> > > >
> > > > Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
> > > > ---
> > > > drivers/staging/sb105x/Kconfig | 1 +
> > > > 1 file changed, 1 insertion(+)
> > > >
> > > > diff --git a/drivers/staging/sb105x/Kconfig b/drivers/staging/sb105x/Kconfig
> > > > index ac87c5e..c957e32 100644
> > > > --- a/drivers/staging/sb105x/Kconfig
> > > > +++ b/drivers/staging/sb105x/Kconfig
> > > > @@ -2,6 +2,7 @@ config SB105X
> > > > tristate "SystemBase PCI Multiport UART"
> > > > select SERIAL_CORE
> > > > depends on PCI
> > > > + depends on BROKEN
> > >
> > > depends on X86
> > >
> > > You can add my SOB if you want. I don't care either way.
> >
> > Please just send a (tested) patch to Greg.
>
> This now breaks Linus' tree .....
Ugh, can someone send me a patch to forward to Linus to fix this please?
Steven, how about fixing the problem properly?
thanks,
greg k-h
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: linux-next: build failure after merge of the final tree (tty tree related)
2012-11-26 23:05 ` Stephen Rothwell
@ 2012-12-13 23:32 ` Stephen Rothwell
2012-12-13 23:38 ` Greg KH
0 siblings, 1 reply; 37+ messages in thread
From: Stephen Rothwell @ 2012-12-13 23:32 UTC (permalink / raw)
To: Steven Rostedt; +Cc: Greg KH, linux-next, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1777 bytes --]
Hi Steve, Greg,
On Tue, 27 Nov 2012 10:05:30 +1100 Stephen Rothwell <sfr@canb.auug.org.au> wrote:
>
> On Mon, 26 Nov 2012 09:35:12 -0500 Steven Rostedt <srostedt@redhat.com> wrote:
> >
> > On Tue, 2012-11-27 at 00:49 +1100, Stephen Rothwell wrote:
> > >
> > > After merging the final tree, today's linux-next build (powerpc
> > > allyesconfig) failed like this:
> > >
> > > In file included from drivers/staging/sb105x/sb_pci_mp.c:1:0:
> > > drivers/staging/sb105x/sb_pci_mp.h:22:25: fatal error: asm/segment.h: No such file or directory
> >
> > I haven't tested this with any other arch than x86. That said, what
> > about this instead:
> >
> > > Caused by commit 68a81291ff66 ("staging: Add SystemBase Multi-2/PCI
> > > driver").
> > >
> > > I have disabled this driver with this patch:
> > >
> > > From: Stephen Rothwell <sfr@canb.auug.org.au>
> > > Date: Tue, 27 Nov 2012 00:45:07 +1100
> > > Subject: [PATCH] disable the SB105X driver
> > >
> > > Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
> > > ---
> > > drivers/staging/sb105x/Kconfig | 1 +
> > > 1 file changed, 1 insertion(+)
> > >
> > > diff --git a/drivers/staging/sb105x/Kconfig b/drivers/staging/sb105x/Kconfig
> > > index ac87c5e..c957e32 100644
> > > --- a/drivers/staging/sb105x/Kconfig
> > > +++ b/drivers/staging/sb105x/Kconfig
> > > @@ -2,6 +2,7 @@ config SB105X
> > > tristate "SystemBase PCI Multiport UART"
> > > select SERIAL_CORE
> > > depends on PCI
> > > + depends on BROKEN
> >
> > depends on X86
> >
> > You can add my SOB if you want. I don't care either way.
>
> Please just send a (tested) patch to Greg.
This now breaks Linus' tree .....
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: linux-next: build failure after merge of the final tree (tty tree related)
2012-11-26 14:35 ` Steven Rostedt
@ 2012-11-26 23:05 ` Stephen Rothwell
2012-12-13 23:32 ` Stephen Rothwell
0 siblings, 1 reply; 37+ messages in thread
From: Stephen Rothwell @ 2012-11-26 23:05 UTC (permalink / raw)
To: Steven Rostedt; +Cc: Greg KH, linux-next, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1566 bytes --]
Hi Steve,
On Mon, 26 Nov 2012 09:35:12 -0500 Steven Rostedt <srostedt@redhat.com> wrote:
>
> On Tue, 2012-11-27 at 00:49 +1100, Stephen Rothwell wrote:
> >
> > After merging the final tree, today's linux-next build (powerpc
> > allyesconfig) failed like this:
> >
> > In file included from drivers/staging/sb105x/sb_pci_mp.c:1:0:
> > drivers/staging/sb105x/sb_pci_mp.h:22:25: fatal error: asm/segment.h: No such file or directory
>
> I haven't tested this with any other arch than x86. That said, what
> about this instead:
>
> > Caused by commit 68a81291ff66 ("staging: Add SystemBase Multi-2/PCI
> > driver").
> >
> > I have disabled this driver with this patch:
> >
> > From: Stephen Rothwell <sfr@canb.auug.org.au>
> > Date: Tue, 27 Nov 2012 00:45:07 +1100
> > Subject: [PATCH] disable the SB105X driver
> >
> > Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
> > ---
> > drivers/staging/sb105x/Kconfig | 1 +
> > 1 file changed, 1 insertion(+)
> >
> > diff --git a/drivers/staging/sb105x/Kconfig b/drivers/staging/sb105x/Kconfig
> > index ac87c5e..c957e32 100644
> > --- a/drivers/staging/sb105x/Kconfig
> > +++ b/drivers/staging/sb105x/Kconfig
> > @@ -2,6 +2,7 @@ config SB105X
> > tristate "SystemBase PCI Multiport UART"
> > select SERIAL_CORE
> > depends on PCI
> > + depends on BROKEN
>
> depends on X86
>
> You can add my SOB if you want. I don't care either way.
Please just send a (tested) patch to Greg.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: linux-next: build failure after merge of the final tree (tty tree related)
2012-11-26 13:49 Stephen Rothwell
@ 2012-11-26 14:35 ` Steven Rostedt
2012-11-26 23:05 ` Stephen Rothwell
0 siblings, 1 reply; 37+ messages in thread
From: Steven Rostedt @ 2012-11-26 14:35 UTC (permalink / raw)
To: Stephen Rothwell; +Cc: Greg KH, linux-next, linux-kernel
On Tue, 2012-11-27 at 00:49 +1100, Stephen Rothwell wrote:
> Hi all,
>
> After merging the final tree, today's linux-next build (powerpc
> allyesconfig) failed like this:
>
> In file included from drivers/staging/sb105x/sb_pci_mp.c:1:0:
> drivers/staging/sb105x/sb_pci_mp.h:22:25: fatal error: asm/segment.h: No such file or directory
I haven't tested this with any other arch than x86. That said, what
about this instead:
>
> Caused by commit 68a81291ff66 ("staging: Add SystemBase Multi-2/PCI
> driver").
>
> I have disabled this driver with this patch:
>
> From: Stephen Rothwell <sfr@canb.auug.org.au>
> Date: Tue, 27 Nov 2012 00:45:07 +1100
> Subject: [PATCH] disable the SB105X driver
>
> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
> ---
> drivers/staging/sb105x/Kconfig | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/staging/sb105x/Kconfig b/drivers/staging/sb105x/Kconfig
> index ac87c5e..c957e32 100644
> --- a/drivers/staging/sb105x/Kconfig
> +++ b/drivers/staging/sb105x/Kconfig
> @@ -2,6 +2,7 @@ config SB105X
> tristate "SystemBase PCI Multiport UART"
> select SERIAL_CORE
> depends on PCI
> + depends on BROKEN
depends on X86
You can add my SOB if you want. I don't care either way.
-- Steve
> help
> A driver for the SystemBase Multi-2/PCI serial card
>
> --
> 1.7.10.280.gaa39
>
^ permalink raw reply [flat|nested] 37+ messages in thread
* linux-next: build failure after merge of the final tree (tty tree related)
@ 2012-11-26 13:49 Stephen Rothwell
2012-11-26 14:35 ` Steven Rostedt
0 siblings, 1 reply; 37+ messages in thread
From: Stephen Rothwell @ 2012-11-26 13:49 UTC (permalink / raw)
To: Greg KH; +Cc: linux-next, linux-kernel, Steven Rostedt
[-- Attachment #1: Type: text/plain, Size: 1159 bytes --]
Hi all,
After merging the final tree, today's linux-next build (powerpc
allyesconfig) failed like this:
In file included from drivers/staging/sb105x/sb_pci_mp.c:1:0:
drivers/staging/sb105x/sb_pci_mp.h:22:25: fatal error: asm/segment.h: No such file or directory
Caused by commit 68a81291ff66 ("staging: Add SystemBase Multi-2/PCI
driver").
I have disabled this driver with this patch:
From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Tue, 27 Nov 2012 00:45:07 +1100
Subject: [PATCH] disable the SB105X driver
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
---
drivers/staging/sb105x/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/staging/sb105x/Kconfig b/drivers/staging/sb105x/Kconfig
index ac87c5e..c957e32 100644
--- a/drivers/staging/sb105x/Kconfig
+++ b/drivers/staging/sb105x/Kconfig
@@ -2,6 +2,7 @@ config SB105X
tristate "SystemBase PCI Multiport UART"
select SERIAL_CORE
depends on PCI
+ depends on BROKEN
help
A driver for the SystemBase Multi-2/PCI serial card
--
1.7.10.280.gaa39
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply related [flat|nested] 37+ messages in thread
* Re: linux-next: build failure after merge of the final tree (tty tree related)
2012-09-24 14:36 Stephen Rothwell
@ 2012-09-25 22:41 ` Greg KH
0 siblings, 0 replies; 37+ messages in thread
From: Greg KH @ 2012-09-25 22:41 UTC (permalink / raw)
To: Stephen Rothwell; +Cc: linux-next, linux-kernel, Jaeden Amero, Alan Cox
On Tue, Sep 25, 2012 at 12:36:44AM +1000, Stephen Rothwell wrote:
> Hi all,
>
> After merging the final tree, today's linux-next build (sparc64 defconfig)
> failed like this:
>
> fs/compat_ioctl.c:868:1: error: 'TIOCSRS485' undeclared here (not in a function)
> fs/compat_ioctl.c:869:1: error: 'TIOCGRS485' undeclared here (not in a function)
>
> Caused by commit 84c3b8486044 ("compat_ioctl: Add RS-485 IOCTLs to the
> list") from the tty tree.
Thanks, Jaeden just sent me a fix for this, I'll go apply it.
greg k-h
^ permalink raw reply [flat|nested] 37+ messages in thread
* linux-next: build failure after merge of the final tree (tty tree related)
@ 2012-09-24 14:36 Stephen Rothwell
2012-09-25 22:41 ` Greg KH
0 siblings, 1 reply; 37+ messages in thread
From: Stephen Rothwell @ 2012-09-24 14:36 UTC (permalink / raw)
To: Greg KH; +Cc: linux-next, linux-kernel, Jaeden Amero, Alan Cox
[-- Attachment #1: Type: text/plain, Size: 487 bytes --]
Hi all,
After merging the final tree, today's linux-next build (sparc64 defconfig)
failed like this:
fs/compat_ioctl.c:868:1: error: 'TIOCSRS485' undeclared here (not in a function)
fs/compat_ioctl.c:869:1: error: 'TIOCGRS485' undeclared here (not in a function)
Caused by commit 84c3b8486044 ("compat_ioctl: Add RS-485 IOCTLs to the
list") from the tty tree.
I have reverted that commit for today.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: linux-next: build failure after merge of the final tree (tty tree related)
2011-09-11 4:23 ` Stephen Rothwell
@ 2011-09-11 9:05 ` Geert Uytterhoeven
0 siblings, 0 replies; 37+ messages in thread
From: Geert Uytterhoeven @ 2011-09-11 9:05 UTC (permalink / raw)
To: Arnaud Lacombe; +Cc: Stephen Rothwell, Greg KH, linux-next, linux-kernel
Hi Arnaud,
On Sun, Sep 11, 2011 at 06:23, Stephen Rothwell <sfr@canb.auug.org.au> wrote:
> On Fri, 26 Aug 2011 11:47:40 -0400 Arnaud Lacombe <lacombar@gmail.com> wrote:
>> Couldn't all the error log be public, rotated over a 7 iteration
>> period ? That would be fair to everyone.
>
> See http://kisskb.ellerman.id.au/linux-next (as stated in all my release
> emails).
And if you want to analyze the results, you can use the scripts I use
to create the
regression/improvement reports for tagged Linux releases.
While it would be nice to have the same for linux-next releases, I
unfortunately don't
have the time for that, as there's still some manual work involved.
http://www.spinics.net/lists/linux-next/msg11040.html
You can get the scripts referenced in my email above from any kernel.org mirror,
e.g. ftp://ftp.belnet.be/mirrors/ftp.kernel.org/pub/linux/kernel/people/geert/linux-log/.
They may not be the latest version, though, have to check/fix when
master.kernel.org
is back.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: linux-next: build failure after merge of the final tree (tty tree related)
2011-08-26 15:47 ` Arnaud Lacombe
@ 2011-09-11 4:23 ` Stephen Rothwell
2011-09-11 9:05 ` Geert Uytterhoeven
0 siblings, 1 reply; 37+ messages in thread
From: Stephen Rothwell @ 2011-09-11 4:23 UTC (permalink / raw)
To: Arnaud Lacombe; +Cc: Greg KH, linux-next, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 403 bytes --]
Hi Arnaud,
On Fri, 26 Aug 2011 11:47:40 -0400 Arnaud Lacombe <lacombar@gmail.com> wrote:
>
> Couldn't all the error log be public, rotated over a 7 iteration
> period ? That would be fair to everyone.
See http://kisskb.ellerman.id.au/linux-next (as stated in all my release
emails).
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
[-- Attachment #2: Type: application/pgp-signature, Size: 490 bytes --]
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: linux-next: build failure after merge of the final tree (tty tree related)
2011-08-26 0:39 ` Stephen Rothwell
@ 2011-08-26 15:47 ` Arnaud Lacombe
2011-09-11 4:23 ` Stephen Rothwell
0 siblings, 1 reply; 37+ messages in thread
From: Arnaud Lacombe @ 2011-08-26 15:47 UTC (permalink / raw)
To: Stephen Rothwell; +Cc: Greg KH, linux-next, linux-kernel
Hi,
[Removed PPC folks from the CC list, the conversation drifted.]
On Thu, Aug 25, 2011 at 8:39 PM, Stephen Rothwell <sfr@canb.auug.org.au> wrote:
> Hi Arnaud,
>
> On Thu, 25 Aug 2011 12:09:20 -0400 Arnaud Lacombe <lacombar@gmail.com> wrote:
>>
>> If you could provide an exhaustive list of them, I'd be interested. Do
>> you account/reference them in the report you make on each new -next
>> tree ?
>
> I don't refer to them at all :-(
>
> If you are not just referring to powerpc ones, then an x86_64
> allmodconfig is a good place to start, there are several in there.
>
> Otherwise, I will send you the results of some of my builds this evening.
>
Couldn't all the error log be public, rotated over a 7 iteration
period ? That would be fair to everyone.
Thanks,
- Arnaud
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: linux-next: build failure after merge of the final tree (tty tree related)
2011-08-25 16:09 ` Arnaud Lacombe
@ 2011-08-26 0:39 ` Stephen Rothwell
2011-08-26 15:47 ` Arnaud Lacombe
0 siblings, 1 reply; 37+ messages in thread
From: Stephen Rothwell @ 2011-08-26 0:39 UTC (permalink / raw)
To: Arnaud Lacombe; +Cc: Timur Tabi, Greg KH, linux-next, linux-kernel, ppc-dev
[-- Attachment #1: Type: text/plain, Size: 604 bytes --]
Hi Arnaud,
On Thu, 25 Aug 2011 12:09:20 -0400 Arnaud Lacombe <lacombar@gmail.com> wrote:
>
> If you could provide an exhaustive list of them, I'd be interested. Do
> you account/reference them in the report you make on each new -next
> tree ?
I don't refer to them at all :-(
If you are not just referring to powerpc ones, then an x86_64
allmodconfig is a good place to start, there are several in there.
Otherwise, I will send you the results of some of my builds this evening.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
[-- Attachment #2: Type: application/pgp-signature, Size: 490 bytes --]
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: linux-next: build failure after merge of the final tree (tty tree related)
2011-08-25 15:51 ` Stephen Rothwell
@ 2011-08-25 16:09 ` Arnaud Lacombe
2011-08-26 0:39 ` Stephen Rothwell
0 siblings, 1 reply; 37+ messages in thread
From: Arnaud Lacombe @ 2011-08-25 16:09 UTC (permalink / raw)
To: Stephen Rothwell; +Cc: Timur Tabi, Greg KH, linux-next, linux-kernel, ppc-dev
Hi,
On Thu, Aug 25, 2011 at 11:51 AM, Stephen Rothwell <sfr@canb.auug.org.au> wrote:
> Hi Timur,
>
> On Thu, 25 Aug 2011 10:22:05 -0500 Timur Tabi <timur@freescale.com> wrote:
>>
>> Is there some trick to building allyesconfig on PowerPC? When I do try that, I
>> get all sorts of weird build errors, and it dies long before it gets to my
>> driver. I get stuff like:
>>
>> LD arch/powerpc/sysdev/xics/built-in.o
>> WARNING: arch/powerpc/sysdev/xics/built-in.o(.text+0x1310): Section mismatch in
>> reference from the function .icp_native_init() to the function
>> .init.text:.icp_native_init_one_node()
>> The function .icp_native_init() references
>> the function __init .icp_native_init_one_node().
>> This is often because .icp_native_init lacks a __init
>> annotation or the annotation of .icp_native_init_one_node is wrong.
>
> We get lots of those in many builds. :-( Just a warning.
>
If you could provide an exhaustive list of them, I'd be interested. Do
you account/reference them in the report you make on each new -next
tree ?
- Arnaud
>> and
>>
>> AS arch/powerpc/kernel/head_64.o
>> arch/powerpc/kernel/exceptions-64s.S: Assembler messages:
>> arch/powerpc/kernel/exceptions-64s.S:1151: Error: attempt to move .org backwards
>> arch/powerpc/kernel/exceptions-64s.S:1160: Error: attempt to move .org backwards
>
> There is a patch for that pending with either the kvm guys or the powerpc guys.
>
>> I guess I don't have the right compiler.
>
> Yours seems to be OK. If you pass -k to make it will get further. Or
> you could configure it and then just try building your driver rather than
> the whole tree.
>
>> Anyway, I think I know how to fix the break that Stephen is seeing. I will post
>> a v4 patch in a few minutes.
>
> Thanks.
> --
> Cheers,
> Stephen Rothwell sfr@canb.auug.org.au
> http://www.canb.auug.org.au/~sfr/
>
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: linux-next: build failure after merge of the final tree (tty tree related)
2011-08-25 15:22 ` Timur Tabi
@ 2011-08-25 15:51 ` Stephen Rothwell
2011-08-25 16:09 ` Arnaud Lacombe
0 siblings, 1 reply; 37+ messages in thread
From: Stephen Rothwell @ 2011-08-25 15:51 UTC (permalink / raw)
To: Timur Tabi; +Cc: Greg KH, linux-next, linux-kernel, ppc-dev
[-- Attachment #1: Type: text/plain, Size: 1630 bytes --]
Hi Timur,
On Thu, 25 Aug 2011 10:22:05 -0500 Timur Tabi <timur@freescale.com> wrote:
>
> Is there some trick to building allyesconfig on PowerPC? When I do try that, I
> get all sorts of weird build errors, and it dies long before it gets to my
> driver. I get stuff like:
>
> LD arch/powerpc/sysdev/xics/built-in.o
> WARNING: arch/powerpc/sysdev/xics/built-in.o(.text+0x1310): Section mismatch in
> reference from the function .icp_native_init() to the function
> .init.text:.icp_native_init_one_node()
> The function .icp_native_init() references
> the function __init .icp_native_init_one_node().
> This is often because .icp_native_init lacks a __init
> annotation or the annotation of .icp_native_init_one_node is wrong.
We get lots of those in many builds. :-( Just a warning.
> and
>
> AS arch/powerpc/kernel/head_64.o
> arch/powerpc/kernel/exceptions-64s.S: Assembler messages:
> arch/powerpc/kernel/exceptions-64s.S:1151: Error: attempt to move .org backwards
> arch/powerpc/kernel/exceptions-64s.S:1160: Error: attempt to move .org backwards
There is a patch for that pending with either the kvm guys or the powerpc guys.
> I guess I don't have the right compiler.
Yours seems to be OK. If you pass -k to make it will get further. Or
you could configure it and then just try building your driver rather than
the whole tree.
> Anyway, I think I know how to fix the break that Stephen is seeing. I will post
> a v4 patch in a few minutes.
Thanks.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
[-- Attachment #2: Type: application/pgp-signature, Size: 490 bytes --]
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: linux-next: build failure after merge of the final tree (tty tree related)
2011-08-25 14:08 ` Greg KH
2011-08-25 14:28 ` Timur Tabi
@ 2011-08-25 15:22 ` Timur Tabi
2011-08-25 15:51 ` Stephen Rothwell
1 sibling, 1 reply; 37+ messages in thread
From: Timur Tabi @ 2011-08-25 15:22 UTC (permalink / raw)
To: Greg KH; +Cc: Stephen Rothwell, linux-next, linux-kernel, ppc-dev
Greg KH wrote:
>> > MSR_GS is defined in arch/powerpc/include/asm/reg_booke.h which is
>> > included by arch/powerpc/include/asm/reg.h but only when defined
>> > (CONFIG_BOOKE) || defined(CONFIG_40x).
> Thanks for the report.
>
> Timur, care to send a fixup patch for this so this gets resolved?
Is there some trick to building allyesconfig on PowerPC? When I do try that, I
get all sorts of weird build errors, and it dies long before it gets to my
driver. I get stuff like:
LD arch/powerpc/sysdev/xics/built-in.o
WARNING: arch/powerpc/sysdev/xics/built-in.o(.text+0x1310): Section mismatch in
reference from the function .icp_native_init() to the function
.init.text:.icp_native_init_one_node()
The function .icp_native_init() references
the function __init .icp_native_init_one_node().
This is often because .icp_native_init lacks a __init
annotation or the annotation of .icp_native_init_one_node is wrong.
and
AS arch/powerpc/kernel/head_64.o
arch/powerpc/kernel/exceptions-64s.S: Assembler messages:
arch/powerpc/kernel/exceptions-64s.S:1151: Error: attempt to move .org backwards
arch/powerpc/kernel/exceptions-64s.S:1160: Error: attempt to move .org backwards
make[1]: *** [arch/powerpc/kernel/head_64.o] Error 1
I guess I don't have the right compiler.
Anyway, I think I know how to fix the break that Stephen is seeing. I will post
a v4 patch in a few minutes.
--
Timur Tabi
Linux kernel developer at Freescale
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: linux-next: build failure after merge of the final tree (tty tree related)
2011-08-25 14:08 ` Greg KH
@ 2011-08-25 14:28 ` Timur Tabi
2011-08-25 15:22 ` Timur Tabi
1 sibling, 0 replies; 37+ messages in thread
From: Timur Tabi @ 2011-08-25 14:28 UTC (permalink / raw)
To: Greg KH
Cc: Stephen Rothwell, <linux-next@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
ppc-dev
On Aug 25, 2011, at 9:08 AM, Greg KH <greg@kroah.com> wrote:
> On Thu, Aug 25, 2011 at 04:18:43PM +1000, Stephen Rothwell wrote:
>>
>
> Thanks for the report.
>
> Timur, care to send a fixup patch for this so this gets resolved?
Yes, I will do it ASAP, probably within the next two hours.
>
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: linux-next: build failure after merge of the final tree (tty tree related)
2011-08-25 6:18 Stephen Rothwell
@ 2011-08-25 14:08 ` Greg KH
2011-08-25 14:28 ` Timur Tabi
2011-08-25 15:22 ` Timur Tabi
0 siblings, 2 replies; 37+ messages in thread
From: Greg KH @ 2011-08-25 14:08 UTC (permalink / raw)
To: Stephen Rothwell; +Cc: linux-next, linux-kernel, Timur Tabi, ppc-dev
On Thu, Aug 25, 2011 at 04:18:43PM +1000, Stephen Rothwell wrote:
> Hi all,
>
> After merging the final tree, today's linux-next build (powerpc
> allyesconfig) failed like this:
>
> drivers/tty/ehv_bytechan.c: In function 'udbg_init_ehv_bc':
> drivers/tty/ehv_bytechan.c:230:18: error: 'MSR_GS' undeclared (first use in this function)
> drivers/tty/ehv_bytechan.c: In function 'ehv_bc_console_write':
> drivers/tty/ehv_bytechan.c:289:24: warning: cast from pointer to integer of different size
> drivers/tty/ehv_bytechan.c: In function 'ehv_bc_console_init':
> drivers/tty/ehv_bytechan.c:355:24: warning: cast to pointer from integer of different size
>
> Caused by commit dcd83aaff1c8 ("tty/powerpc: introduce the ePAPR embedded
> hypervisor byte channel driver").
>
> MSR_GS is defined in arch/powerpc/include/asm/reg_booke.h which is
> included by arch/powerpc/include/asm/reg.h but only when defined
> (CONFIG_BOOKE) || defined(CONFIG_40x).
Thanks for the report.
Timur, care to send a fixup patch for this so this gets resolved?
greg k-h
^ permalink raw reply [flat|nested] 37+ messages in thread
* linux-next: build failure after merge of the final tree (tty tree related)
@ 2011-08-25 6:18 Stephen Rothwell
2011-08-25 14:08 ` Greg KH
0 siblings, 1 reply; 37+ messages in thread
From: Stephen Rothwell @ 2011-08-25 6:18 UTC (permalink / raw)
To: Greg KH; +Cc: linux-next, linux-kernel, Timur Tabi, ppc-dev
[-- Attachment #1: Type: text/plain, Size: 979 bytes --]
Hi all,
After merging the final tree, today's linux-next build (powerpc
allyesconfig) failed like this:
drivers/tty/ehv_bytechan.c: In function 'udbg_init_ehv_bc':
drivers/tty/ehv_bytechan.c:230:18: error: 'MSR_GS' undeclared (first use in this function)
drivers/tty/ehv_bytechan.c: In function 'ehv_bc_console_write':
drivers/tty/ehv_bytechan.c:289:24: warning: cast from pointer to integer of different size
drivers/tty/ehv_bytechan.c: In function 'ehv_bc_console_init':
drivers/tty/ehv_bytechan.c:355:24: warning: cast to pointer from integer of different size
Caused by commit dcd83aaff1c8 ("tty/powerpc: introduce the ePAPR embedded
hypervisor byte channel driver").
MSR_GS is defined in arch/powerpc/include/asm/reg_booke.h which is
included by arch/powerpc/include/asm/reg.h but only when defined
(CONFIG_BOOKE) || defined(CONFIG_40x).
I have reverted that commit for today.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
[-- Attachment #2: Type: application/pgp-signature, Size: 490 bytes --]
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: linux-next: build failure after merge of the final tree (tty tree related)
2011-01-06 3:27 ` Stephen Rothwell
@ 2011-01-06 18:45 ` Greg KH
0 siblings, 0 replies; 37+ messages in thread
From: Greg KH @ 2011-01-06 18:45 UTC (permalink / raw)
To: Stephen Rothwell; +Cc: Thomas Gleixner, linux-next, linux-kernel
On Thu, Jan 06, 2011 at 02:27:10PM +1100, Stephen Rothwell wrote:
> HI Greg,
>
> On Fri, 17 Dec 2010 11:16:17 +0100 (CET) Thomas Gleixner <tglx@linutronix.de> wrote:
> >
> > On Thu, 16 Dec 2010, Greg KH wrote:
> > > On Fri, Dec 17, 2010 at 05:11:20PM +1100, Stephen Rothwell wrote:
> > > > Hi Greg,
> > > >
> > > > After merging the final tree, today's linux-next build (powerpc
> > > > allyesconfig) failed like this:
> > > >
> > > > drivers/serial/apbuart.c:596: error: conflicting types for 'grlib_apbuart_configure'
> > > > drivers/serial/apbuart.c:523: note: previous declaration of 'grlib_apbuart_configure' was here
> > > >
> > > > Caused by commit 35c64e5d13c3d7d8c4ad061ad5e20498b9160c24 ("drivers:
> > > > serial: apbuart: Handle OF failures gracefully"). This build has
> > > > CONFIG_SERIAL_GRLIB_GAISLER_APBUART_CONSOLE set ...
> > > >
> > > > I have reverted this commit for today.
> > >
> > > Ugh. Thomas, care to send me a patch?
> >
> > Sorry, I missed the console part. Patch below.
>
> Ping?
Ick, sorry about this, I've now applied this.
thanks for the reminder.
greg k-h
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: linux-next: build failure after merge of the final tree (tty tree related)
2010-12-17 10:16 ` Thomas Gleixner
@ 2011-01-06 3:27 ` Stephen Rothwell
2011-01-06 18:45 ` Greg KH
0 siblings, 1 reply; 37+ messages in thread
From: Stephen Rothwell @ 2011-01-06 3:27 UTC (permalink / raw)
To: Greg KH; +Cc: Thomas Gleixner, linux-next, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 2219 bytes --]
HI Greg,
On Fri, 17 Dec 2010 11:16:17 +0100 (CET) Thomas Gleixner <tglx@linutronix.de> wrote:
>
> On Thu, 16 Dec 2010, Greg KH wrote:
> > On Fri, Dec 17, 2010 at 05:11:20PM +1100, Stephen Rothwell wrote:
> > > Hi Greg,
> > >
> > > After merging the final tree, today's linux-next build (powerpc
> > > allyesconfig) failed like this:
> > >
> > > drivers/serial/apbuart.c:596: error: conflicting types for 'grlib_apbuart_configure'
> > > drivers/serial/apbuart.c:523: note: previous declaration of 'grlib_apbuart_configure' was here
> > >
> > > Caused by commit 35c64e5d13c3d7d8c4ad061ad5e20498b9160c24 ("drivers:
> > > serial: apbuart: Handle OF failures gracefully"). This build has
> > > CONFIG_SERIAL_GRLIB_GAISLER_APBUART_CONSOLE set ...
> > >
> > > I have reverted this commit for today.
> >
> > Ugh. Thomas, care to send me a patch?
>
> Sorry, I missed the console part. Patch below.
Ping?
> Thanks,
>
> tglx
> ---
> Subject: drivers: serial: apbuart: Fixup apbuart_console_init()
> From: Thomas Gleixner <tglx@linutronix.de>
> Date: Fri, 17 Dec 2010 11:09:49 +0100
>
> commit 35c64e5d (drivers: serial: apbuart: Handle OF failures
> gracefully) missed that the modified grlib_apbuart_configure()
> function is called from apbuart_console_init() as well.
>
> Fix the fallout.
>
> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
> ---
> drivers/serial/apbuart.c | 5 +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> Index: linux-2.6-tip/drivers/serial/apbuart.c
> ===================================================================
> --- linux-2.6-tip.orig/drivers/serial/apbuart.c
> +++ linux-2.6-tip/drivers/serial/apbuart.c
> @@ -520,11 +520,12 @@ static struct console grlib_apbuart_cons
> };
>
>
> -static void grlib_apbuart_configure(void);
> +static int grlib_apbuart_configure(void);
>
> static int __init apbuart_console_init(void)
> {
> - grlib_apbuart_configure();
> + if (grlib_apbuart_configure())
> + return -ENODEV;
> register_console(&grlib_apbuart_console);
> return 0;
> }
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
[-- Attachment #2: Type: application/pgp-signature, Size: 490 bytes --]
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: linux-next: build failure after merge of the final tree (tty tree related)
2010-12-17 7:04 ` Greg KH
@ 2010-12-17 10:16 ` Thomas Gleixner
2011-01-06 3:27 ` Stephen Rothwell
0 siblings, 1 reply; 37+ messages in thread
From: Thomas Gleixner @ 2010-12-17 10:16 UTC (permalink / raw)
To: Greg KH; +Cc: Stephen Rothwell, linux-next, linux-kernel
On Thu, 16 Dec 2010, Greg KH wrote:
> On Fri, Dec 17, 2010 at 05:11:20PM +1100, Stephen Rothwell wrote:
> > Hi Greg,
> >
> > After merging the final tree, today's linux-next build (powerpc
> > allyesconfig) failed like this:
> >
> > drivers/serial/apbuart.c:596: error: conflicting types for 'grlib_apbuart_configure'
> > drivers/serial/apbuart.c:523: note: previous declaration of 'grlib_apbuart_configure' was here
> >
> > Caused by commit 35c64e5d13c3d7d8c4ad061ad5e20498b9160c24 ("drivers:
> > serial: apbuart: Handle OF failures gracefully"). This build has
> > CONFIG_SERIAL_GRLIB_GAISLER_APBUART_CONSOLE set ...
> >
> > I have reverted this commit for today.
>
> Ugh. Thomas, care to send me a patch?
Sorry, I missed the console part. Patch below.
Thanks,
tglx
---
Subject: drivers: serial: apbuart: Fixup apbuart_console_init()
From: Thomas Gleixner <tglx@linutronix.de>
Date: Fri, 17 Dec 2010 11:09:49 +0100
commit 35c64e5d (drivers: serial: apbuart: Handle OF failures
gracefully) missed that the modified grlib_apbuart_configure()
function is called from apbuart_console_init() as well.
Fix the fallout.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
drivers/serial/apbuart.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
Index: linux-2.6-tip/drivers/serial/apbuart.c
===================================================================
--- linux-2.6-tip.orig/drivers/serial/apbuart.c
+++ linux-2.6-tip/drivers/serial/apbuart.c
@@ -520,11 +520,12 @@ static struct console grlib_apbuart_cons
};
-static void grlib_apbuart_configure(void);
+static int grlib_apbuart_configure(void);
static int __init apbuart_console_init(void)
{
- grlib_apbuart_configure();
+ if (grlib_apbuart_configure())
+ return -ENODEV;
register_console(&grlib_apbuart_console);
return 0;
}
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: linux-next: build failure after merge of the final tree (tty tree related)
2010-12-17 6:11 Stephen Rothwell
@ 2010-12-17 7:04 ` Greg KH
2010-12-17 10:16 ` Thomas Gleixner
0 siblings, 1 reply; 37+ messages in thread
From: Greg KH @ 2010-12-17 7:04 UTC (permalink / raw)
To: Stephen Rothwell; +Cc: linux-next, linux-kernel, Thomas Gleixner
On Fri, Dec 17, 2010 at 05:11:20PM +1100, Stephen Rothwell wrote:
> Hi Greg,
>
> After merging the final tree, today's linux-next build (powerpc
> allyesconfig) failed like this:
>
> drivers/serial/apbuart.c:596: error: conflicting types for 'grlib_apbuart_configure'
> drivers/serial/apbuart.c:523: note: previous declaration of 'grlib_apbuart_configure' was here
>
> Caused by commit 35c64e5d13c3d7d8c4ad061ad5e20498b9160c24 ("drivers:
> serial: apbuart: Handle OF failures gracefully"). This build has
> CONFIG_SERIAL_GRLIB_GAISLER_APBUART_CONSOLE set ...
>
> I have reverted this commit for today.
Ugh. Thomas, care to send me a patch?
thanks,
greg k-h
^ permalink raw reply [flat|nested] 37+ messages in thread
* linux-next: build failure after merge of the final tree (tty tree related)
@ 2010-12-17 6:11 Stephen Rothwell
2010-12-17 7:04 ` Greg KH
0 siblings, 1 reply; 37+ messages in thread
From: Stephen Rothwell @ 2010-12-17 6:11 UTC (permalink / raw)
To: Greg KH; +Cc: linux-next, linux-kernel, Thomas Gleixner
[-- Attachment #1: Type: text/plain, Size: 635 bytes --]
Hi Greg,
After merging the final tree, today's linux-next build (powerpc
allyesconfig) failed like this:
drivers/serial/apbuart.c:596: error: conflicting types for 'grlib_apbuart_configure'
drivers/serial/apbuart.c:523: note: previous declaration of 'grlib_apbuart_configure' was here
Caused by commit 35c64e5d13c3d7d8c4ad061ad5e20498b9160c24 ("drivers:
serial: apbuart: Handle OF failures gracefully"). This build has
CONFIG_SERIAL_GRLIB_GAISLER_APBUART_CONSOLE set ...
I have reverted this commit for today.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
[-- Attachment #2: Type: application/pgp-signature, Size: 490 bytes --]
^ permalink raw reply [flat|nested] 37+ messages in thread
* Re: linux-next: build failure after merge of the final tree (tty tree related)
2010-11-12 1:57 Stephen Rothwell
@ 2010-11-12 10:44 ` Alan Cox
0 siblings, 0 replies; 37+ messages in thread
From: Alan Cox @ 2010-11-12 10:44 UTC (permalink / raw)
To: Stephen Rothwell; +Cc: Greg KH, linux-next, linux-kernel, Russ Gorby
On Fri, 12 Nov 2010 12:57:51 +1100
Stephen Rothwell <sfr@canb.auug.org.au> wrote:
> Hi Greg,
>
> After merging the final tree, today's linux-next build (powerpc
> allyesconfig) failed like this:
>
> drivers/serial/ifx6x60.c: In function 'ifx_spi_reset':
> drivers/serial/ifx6x60.c:928: error: implicit declaration of function
> 'msleep'
Patch sent to Greg
Alan
^ permalink raw reply [flat|nested] 37+ messages in thread
* linux-next: build failure after merge of the final tree (tty tree related)
@ 2010-11-12 1:57 Stephen Rothwell
2010-11-12 10:44 ` Alan Cox
0 siblings, 1 reply; 37+ messages in thread
From: Stephen Rothwell @ 2010-11-12 1:57 UTC (permalink / raw)
To: Greg KH; +Cc: linux-next, linux-kernel, Russ Gorby, Alan Cox
[-- Attachment #1: Type: text/plain, Size: 604 bytes --]
Hi Greg,
After merging the final tree, today's linux-next build (powerpc
allyesconfig) failed like this:
drivers/serial/ifx6x60.c: In function 'ifx_spi_reset':
drivers/serial/ifx6x60.c:928: error: implicit declaration of function 'msleep'
Caused by commit af3b8881f4c9852eefe9c7f1a997b3ecf580561b ("ifx6x60: SPI
protocol driver for Infineon 6x60 modem"). An include is missing
(linux/delay.h). See Rule 1 in Documentation/SubmitChecklist.
I have reverted that commit for today.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
[-- Attachment #2: Type: application/pgp-signature, Size: 490 bytes --]
^ permalink raw reply [flat|nested] 37+ messages in thread
end of thread, other threads:[~2013-10-29 7:04 UTC | newest]
Thread overview: 37+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-07-20 5:02 linux-next: build failure after merge of the final tree (tty tree related) Stephen Rothwell
2012-07-25 22:47 ` Greg KH
2012-07-26 0:23 ` Alan Cox
2012-07-25 22:52 ` Stephen Rothwell
-- strict thread matches above, loose matches on Subject: below --
2013-10-28 14:33 Stephen Rothwell
2013-10-28 14:49 ` Michal Simek
2013-10-28 16:05 ` Sören Brinkmann
2013-10-28 16:33 ` Greg KH
2013-10-29 7:04 ` Stephen Rothwell
2013-09-27 8:21 Stephen Rothwell
2013-09-28 1:04 ` Greg KH
2013-04-02 7:57 Stephen Rothwell
2012-11-26 13:49 Stephen Rothwell
2012-11-26 14:35 ` Steven Rostedt
2012-11-26 23:05 ` Stephen Rothwell
2012-12-13 23:32 ` Stephen Rothwell
2012-12-13 23:38 ` Greg KH
2012-12-14 0:11 ` Steven Rostedt
2012-09-24 14:36 Stephen Rothwell
2012-09-25 22:41 ` Greg KH
2011-08-25 6:18 Stephen Rothwell
2011-08-25 14:08 ` Greg KH
2011-08-25 14:28 ` Timur Tabi
2011-08-25 15:22 ` Timur Tabi
2011-08-25 15:51 ` Stephen Rothwell
2011-08-25 16:09 ` Arnaud Lacombe
2011-08-26 0:39 ` Stephen Rothwell
2011-08-26 15:47 ` Arnaud Lacombe
2011-09-11 4:23 ` Stephen Rothwell
2011-09-11 9:05 ` Geert Uytterhoeven
2010-12-17 6:11 Stephen Rothwell
2010-12-17 7:04 ` Greg KH
2010-12-17 10:16 ` Thomas Gleixner
2011-01-06 3:27 ` Stephen Rothwell
2011-01-06 18:45 ` Greg KH
2010-11-12 1:57 Stephen Rothwell
2010-11-12 10:44 ` Alan Cox
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).