linux-next.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* linux-next: Tree for Nov 24
@ 2011-11-24  6:43 Stephen Rothwell
  2011-11-24 18:50 ` linux-next: Tree for Nov 24 (fs/pnfs vs. exofs) Randy Dunlap
  0 siblings, 1 reply; 17+ messages in thread
From: Stephen Rothwell @ 2011-11-24  6:43 UTC (permalink / raw)
  To: linux-next; +Cc: LKML

[-- Attachment #1: Type: text/plain, Size: 31619 bytes --]

Hi all,

Changes since 20111123:

New tree: hsi

Linus' tree gained a build failure for which I reverted a commit.

The arm-soc tree gained conflicts against Linus' and the arm trees.

The at91 tree gained conflicts against the arm-soc tree.

The drm tree still had its build failure so I used the version from
next-20111115.

The net-next tree lost its conflict and build failure.

The regulator tree gained a build failure so I used the version from
next-20111123.

The pm tree (re)gained a build failure for which I applied a patch.

The uprobes tree lost its build failures.

The cgroup tree gained a conflict against the pm tree.

----------------------------------------------------------------------------

I have created today's linux-next tree at
git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
(patches at http://www.kernel.org/pub/linux/kernel/next/ ).  If you
are tracking the linux-next tree using git, you should not use "git pull"
to do so as that will try to merge the new linux-next release with the
old one.  You should use "git fetch" as mentioned in the FAQ on the wiki
(see below).

You can see which trees have been included by looking in the Next/Trees
file in the source.  There are also quilt-import.log and merge.log files
in the Next directory.  Between each merge, the tree was built with
a ppc64_defconfig for powerpc and an allmodconfig for x86_64. After the
final fixups (if any), it is also built with powerpc allnoconfig (32 and
64 bit), ppc44x_defconfig and allyesconfig (minus
CONFIG_PROFILE_ALL_BRANCHES - this fails its final link) and i386, sparc
and sparc64 defconfig. These builds also have
CONFIG_ENABLE_WARN_DEPRECATED, CONFIG_ENABLE_MUST_CHECK and
CONFIG_DEBUG_INFO disabled when necessary.

Below is a summary of the state of the merge.

We are up to 199 trees (counting Linus' and 27 trees of patches pending
for Linus' tree), more are welcome (even if they are currently empty).
Thanks to those who have contributed, and to those who haven't, please do.

Status of my local build tests will be at
http://kisskb.ellerman.id.au/linux-next .  If maintainers want to give
advice about cross compilers/configs that work, we are always open to add
more builds.

Thanks to Randy Dunlap for doing many randconfig builds.

There is a wiki covering stuff to do with linux-next at
http://linux.f-seidel.de/linux-next/pmwiki/ .  Thanks to Frank Seidel.

-- 
Cheers,
Stephen Rothwell                    sfr@canb.auug.org.au

$ git checkout master
$ git reset --hard stable
Merging origin/master (0952157 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci)
Merging fixes/master (3155521 Revert "hvc_console: display printk messages on console.")
[master 6a1944b] Revert "iio: fix a leak due to improper use of anon_inode_getfd()"
Merging kbuild-current/rc-fixes (44656fa kbuild: Fix missing system calls check on mips.)
Merging arm-current/fixes (7334c67 Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into fixes)
Merging m68k-current/for-linus (2690e21 m68k/mac: Remove mac_irq_{en,dis}able() wrappers)
Merging powerpc-merge/merge (a313f4c powerpc/signal32: Fix sigset_t conversion when copying to user)
Merging 52xx-and-virtex-current/powerpc/merge (c49f878 dtc/powerpc: remove obsolete .gitignore entries)
Merging sparc/master (0b64120 sparc64: Patch sun4v code sequences properly on module load.)
Merging scsi-rc-fixes/master (e5a44df [SCSI] hpsa: Disable ASPM)
Merging net/master (685f94e ipv4 : igmp : fix error handle in ip_mc_add_src())
Merging sound-current/for-linus (77088cc Merge branch 'fix/asoc' into for-linus)
Merging pci-current/for-linus (4cac2eb PCI hotplug: shpchp: don't blindly claim non-AMD 0x7450 device IDs)
Merging wireless/master (82e5fc2 Revert "rt2800pci: handle spurious interrupts")
Merging driver-core.current/driver-core-linus (e25ba0c Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/linux-nfs)
Merging tty.current/tty-linus (e25ba0c Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/linux-nfs)
Merging usb.current/usb-linus (e25ba0c Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/linux-nfs)
Merging staging.current/staging-linus (e25ba0c Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/linux-nfs)
Merging char-misc.current/char-misc-linus (e25ba0c Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/linux-nfs)
Merging cpufreq-current/fixes (eb0b38a [CPUFREQ] db8500: fix build error due to undeclared i variable)
Merging input-current/for-linus (77f6ca5 Input: ams_delta_serio - include linux/module.h)
Merging md-current/for-linus (257a4b4 md/raid5: STRIPE_ACTIVE has lock semantics, add barriers)
Merging audit-current/for-linus (def5754 Audit: remove spaces from audit_log_d_path)
Merging crypto-current/master (2742528 crypto: mv_cesa - fix hashing of chunks > 1920 bytes)
Merging ide/master (0ab3d8b cy82c693: fix PCI device selection)
Merging dwmw2/master (244dc4e Merge git://git.infradead.org/users/dwmw2/random-2.6)
Merging sh-current/sh-fixes-for-linus (21d41f2 sh: fix the compile error in setup-sh7757.c)
Merging rmobile-current/rmobile-fixes-for-linus (a408bae ARM: mach-shmobile: sh7372 CMT3 and CMT4 clock support)
Merging devicetree-current/devicetree/merge (50e07f8 dt: add empty of_machine_is_compatible)
Merging spi-current/spi/merge (940ab88 drivercore: Add helper macro for platform_driver boilerplate)
Merging arm/for-next (9a40278 Merge branch 'devel' into for-next)
Merging arm-lpae/for-next (b0d153e ARM: LPAE: Add the Kconfig entries)
CONFLICT (content): Merge conflict in arch/arm/mm/ioremap.c
CONFLICT (content): Merge conflict in arch/arm/include/asm/tlb.h
CONFLICT (content): Merge conflict in arch/arm/include/asm/pgtable.h
CONFLICT (content): Merge conflict in arch/arm/include/asm/pgalloc.h
Merging arm-soc/for-next (b01493c Merge branch 'fixes' into for-next)
CONFLICT (content): Merge conflict in drivers/net/ethernet/cadence/Kconfig
CONFLICT (content): Merge conflict in arch/arm/tools/mach-types
Merging arm-perf/for-next/perf (90aec28 Merge branches 'perf/fixes', 'perf/event-nos', 'perf/omap4' and 'perf/updates' into for-next/perf)
Merging at91/at91-next (de21d1d ARM: at91: pm_slowclock rename register to named define)
CONFLICT (content): Merge conflict in drivers/net/ethernet/cadence/Kconfig
CONFLICT (content): Merge conflict in arch/arm/mach-at91/setup.c
CONFLICT (content): Merge conflict in arch/arm/mach-at91/include/mach/board.h
CONFLICT (content): Merge conflict in arch/arm/mach-at91/board-snapper9260.c
CONFLICT (content): Merge conflict in arch/arm/mach-at91/board-cpuat91.c
CONFLICT (content): Merge conflict in arch/arm/mach-at91/board-cpu9krea.c
CONFLICT (content): Merge conflict in arch/arm/mach-at91/board-cap9adk.c
CONFLICT (content): Merge conflict in arch/arm/mach-at91/at91sam9rl.c
CONFLICT (content): Merge conflict in arch/arm/mach-at91/at91sam9g45.c
CONFLICT (content): Merge conflict in arch/arm/mach-at91/at91sam9263.c
CONFLICT (content): Merge conflict in arch/arm/mach-at91/at91sam9261.c
CONFLICT (content): Merge conflict in arch/arm/mach-at91/at91sam9260.c
CONFLICT (content): Merge conflict in arch/arm/mach-at91/at91cap9.c
Merging davinci/davinci-next (fe0d422 Linux 3.0-rc6)
Merging i.MX/for-next (5788f4d Merge branches 'imx-fixes', 'imx-cleanup' and 'imx-features' into master)
CONFLICT (content): Merge conflict in arch/arm/plat-mxc/include/mach/hardware.h
CONFLICT (modify/delete): arch/arm/mach-mx5/pm-imx5.c deleted in HEAD and modified in i.MX/for-next. Version i.MX/for-next of arch/arm/mach-mx5/pm-imx5.c left in tree.
CONFLICT (modify/delete): arch/arm/mach-mx5/Makefile deleted in HEAD and modified in i.MX/for-next. Version i.MX/for-next of arch/arm/mach-mx5/Makefile left in tree.
CONFLICT (modify/delete): arch/arm/mach-mx5/Kconfig deleted in HEAD and modified in i.MX/for-next. Version i.MX/for-next of arch/arm/mach-mx5/Kconfig left in tree.
CONFLICT (content): Merge conflict in arch/arm/mach-imx/mm-imx5.c
CONFLICT (content): Merge conflict in arch/arm/mach-imx/devices-imx53.h
CONFLICT (content): Merge conflict in arch/arm/mach-imx/clock-mx51-mx53.c
$ git rm -f arch/arm/mach-mx5/pm-imx5.c arch/arm/mach-mx5/Makefile arch/arm/mach-mx5/Kconfig
Merging linux-spec/for-next (5111711 Merge branch 'for-2.6.37' of git://linux-nfs.org/~bfields/linux)
Merging omap/for-next (322a8b0 Linux 3.1-rc1)
Merging pxa/for-next (19d6c13 [ARM] pxa/hx4700: actually use platform_lcd driver)
Merging samsung/next-samsung (9edb240 ARM: H1940/RX1950: Change default LED triggers)
Merging s5p/for-next (a188e1e Merge branch 'next-samsung-devel' into for-next)
CONFLICT (content): Merge conflict in arch/arm/mach-exynos/include/mach/entry-macro.S
CONFLICT (content): Merge conflict in arch/arm/mach-exynos/cpu.c
Merging tegra/for-next (b48c54e Merge branch 'for-3.3/boards' into for-next)
Merging xilinx/arm-next (b85a3ef ARM: Xilinx: Adding Xilinx board support)
Merging blackfin/for-linus (9059054 blackfin: Fixup export.h includes)
Merging c6x/for-linux-next (2141355 C6X: MAINTAINERS)
Merging cris/for-next (ea78f5b CRIS: Update documentation)
Merging quilt/hexagon (110b372 Remove unneeded include of version.h from arch/hexagon/include/asm/spinlock_types.h)
Merging ia64/next (2174f6d pstore: gracefully handle NULL pstore_info functions)
Merging m68k/for-next (9e9ceea m68k: Don't comment out syscalls used by glibc)
Merging m68knommu/for-next (27f8c15 m68knommu: fix ColdFire slice timer to handle clock counter wrapping)
CONFLICT (content): Merge conflict in arch/m68k/Kconfig.debug
Merging microblaze/next (7f80850 Merge branch 'rmobile-fixes-for-linus' of git://github.com/pmundt/linux-sh)
Merging mips/mips-for-linux-next (7564ded Merge branches 'next/ar7', 'next/ath79', 'next/bcm63xx', 'next/bmips', 'next/cavium', 'next/generic', 'next/kprobes', 'next/lantiq', 'next/perf' and 'next/raza' into mips-for-linux-next)
Merging openrisc/for-upstream (b6fd41e Linux 3.1-rc6)
Merging parisc/for-next (fc99a91 futex: Use same lock set as lws calls)
Merging powerpc/next (96cc017 powerpc/p3060qds: Add support for P3060QDS board)
Merging 4xx/next (9fcd768 powerpc/40x: Remove obsolete HCU4 board)
Merging 52xx-and-virtex/powerpc/next (c1395f4 dtc/powerpc: remove obsolete .gitignore entries)
Merging galak/next (4022ded powerpc/85xx: Update SRIO device tree nodes)
Merging s390/features (100683e [S390] topology: cleanup z10 topology handling)
Merging sh/sh-latest (b9a3acf Merge branch 'sh/stable-updates' into sh-latest)
Merging rmobile/rmobile-latest (b58c580 Merge branch 'rmobile-fixes-for-linus' into rmobile-latest)
Merging sparc-next/master (3ee72ca Merge git://github.com/davem330/net)
Merging tile/master (1583171 Merge branch 'for-linus' of git://github.com/cmetcalf-tilera/linux-tile)
Merging unicore32/unicore32 (ed96dfb unicore32, exec: remove redundant set_fs(USER_DS))
Merging xtensa/master (29aced6 xtensa: remove defining register numbers)
Merging ceph/for-next (3395734 libceph: fix double-free of page vector)
Merging cifs/master (9c32c63 cifs: Fix sparse warning when calling cifs_strtoUCS)
Merging configfs/linux-next (420118c configfs: Rework configfs_depend_item() locking and make lockdep happy)
Merging ecryptfs/next (aaef29d eCryptfs: Flush file in vma close)
Merging ext3/for_next (ed47a7d udf: Cleanup metadata flags handling)
Merging ext4/dev (6e58ad6 ext4: fix up a undefined error in ext4_free_blocks in debugging code)
Merging fatfs/master (710d440 fat: fat16 support maximum 4GB file/vol size as WinXP or 7.)
Merging fuse/for-next (cfcfc9e Linux 3.2-rc2)
Merging gfs2/master (6a8099e GFS2: Fix multi-block allocation)
Merging hfsplus/for-next (6596528 hfsplus: ensure bio requests are not smaller than the hardware sectors)
Merging jfs/next (1c8007b jfs: flush journal completely before releasing metadata inodes)
Merging logfs/master (011a85a logfs: Prevent memory corruption)
CONFLICT (content): Merge conflict in fs/logfs/file.c
Merging nfs/linux-next (24ca9a8 SUNRPC: Ensure we return EAGAIN in xs_nospace if congestion is cleared)
Merging nfsd/nfsd-next (353de31 nfsd4: fix CONFIG_NFSD_FAULT_INJECTION compile error)
Merging nilfs2/for-next (93ee7a9 Linux 3.1-rc2)
Merging ocfs2/linux-next (249ec93 ocfs2: Use filemap_write_and_wait() instead of write_inode_now())
Merging omfs/for-next (976d167 Linux 3.1-rc9)
Merging squashfs/master (7657cac Squashfs: Add an option to set dev block size to 4K)
Merging v9fs/for-next (f8f5ed7 Merge branch 'dev' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4)
Merging ubifs/linux-next (eaecf43 UBIFS: Use kmemdup rather than duplicating its implementation)
Merging xfs/master (c889132 MAINTAINERS: update XFS maintainer entry)
Merging vfs/for-next (206b1d0 Fix POSIX ACL permission check)
Merging vfs-scale/vfs-scale-working (32385c7 kernel: fix hlist_bl again)
Merging pci/linux-next (cfbf1bd PCI: msi: Disable msi interrupts when we initialize a pci device)
Merging hid/for-next (14359df Merge branch 'multitouch' into for-next)
Merging quilt/i2c (5925767 i2c: Make i2cdev_notifier_call static)
Merging bjdooks-i2c/next-i2c (f8420b7 fixup merge)
CONFLICT (add/add): Merge conflict in drivers/i2c/busses/i2c-designware-platdrv.c
Merging quilt/jdelvare-hwmon (dda4fa1 hwmon: (lm63) Add support for LM96163)
Merging hwmon-staging/hwmon-next (3627902 hwmon: (exynos4_tmu) Fix Kconfig dependency)
Merging quilt/kernel-doc (c3b92c8 Linux 3.1)
Merging docs/docs-move (5c24d8b Merge branch 'docs/docbook/drm' of git://github.com/mfwitten/linux into docs-move)
Merging v4l-dvb/master (eeff030 Merge branch 'poll-pwc' of /home/v4l/v4l/patchwork)
CONFLICT (content): Merge conflict in drivers/staging/media/as102/as102_drv.h
Merging kbuild/for-next (ddb550d Merge branch 'kbuild/misc' into kbuild/for-next)
Merging kconfig/for-next (eae1c36 Merge branch 'kconfig/for-linus-2' into kconfig/for-next)
Merging libata/NEXT (3fab0c1 ahci: start engine only during soft/hard resets)
Merging infiniband/for-next (042f36e IB/qib: Don't use schedule_work())
Merging acpi/next (efb9058 Merge branches 'acpi', 'idle', 'mrst-pmu' and 'pm-tools' into next)
Merging cpupowerutils/master (498ca79 cpupower: use man(1) when calling "cpupower help subcommand")
Merging ieee1394/for-next (a572e68 firewire: ohci: fix isochronous DMA synchronization)
Merging ubi/linux-next (93ee7a9 Linux 3.1-rc2)
Merging dlm/next (9beb3bf dlm: convert rsb list to rb_tree)
Merging scsi/master (f7c9c6b [SCSI] Fix block queue and elevator memory leak in scsi_alloc_sdev)
Merging target-updates/for-next (5bda90c target: use ->exectute_task for all CDB emulation)
Merging target-merge/for-next-merge (e0d85e5 ib_srpt: Initial SRP Target merge for v3.2-rc1)
Merging slave-dma/next (e696643 IMX/DMA : set the DMA direction in the sdma_control())
CONFLICT (content): Merge conflict in drivers/dma/pl330.c
Merging async_tx/next (21ef4b8 dmaengine: use DEFINE_IDR for static initialization)
Merging net-next/master (8c21522 netprio_cgroup: Fix build break)
CONFLICT (content): Merge conflict in net/ipv4/inet_diag.c
Merging wireless-next/master (eb1852b rtlwifi: squash warning in _usb_read_sync)
Merging bluetooth/master (c6feeb2 Bluetooth: Use queue in the device list)
Merging mtd/master (e0d6511 Merge git://git.infradead.org/mtd-2.6)
Merging l2-mtd/master (aab0b1f mtd: ndfc: fix typo in structure dereference)
Merging crypto/master (8b4d43a crypto: caam - add support for MD5 algorithm variants)
Merging sound/for-next (1d2dfda Merge branch 'topic/hda' into for-next)
Merging sound-asoc/for-next (39afd66 ASoC: Add fully_routed flag to Speyside machines)
Merging cpufreq/next (5aace58 [CPUFREQ] ARM Exynos4210 PM/Suspend compatibility with different bootloaders)
Merging quilt/rr (7c9d1cc lguest: switch segment-voodoo-numbers to readable symbols)
Merging input/next (3d95fd6 Input: elantech - add resolution query support for v4 hardware)
CONFLICT (content): Merge conflict in drivers/input/keyboard/samsung-keypad.c
Merging input-mt/next (02f8c6a Linux 3.0)
Merging lsm/for-next (ca05a99 capabilities: remain source compatible with 32-bit raw legacy capability support.)
Merging block/for-next (2a33dfb Merge branch 'for-3.3/mtip32xx' into for-next)
Merging quilt/device-mapper (94956ee Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net)
Merging embedded/master (4744b43 embedded: fix vc_translate operator precedence)
Merging firmware/master (6e03a20 firmware: speed up request_firmware(), v3)
Merging pcmcia/master (74411c0 smc91c92_cs.c: fix bogus compiler warning)
Merging battery/master (85b5fbf power_supply: Fix sysfs format warning)
Merging mmc/mmc-next (ce8fda6 mmc: core: Fix typo at mmc_card_sleep)
Merging kgdb/kgdb-next (880ba69 lib: rename pack_hex_byte() to hex_byte_pack())
Merging slab/for-next (3bd3e0c Merge branch 'slab/next' into for-next)
Merging uclinux/for-next (5e442a4 Revert "proc: fix races against execve() of /proc/PID/fd**")
Merging md/for-next (c7eefaf md/raid1: Mark device replaceable when we see a write error.)
Merging mfd/for-next (b958f7a mfd: Fix missing abx500 header file updates)
Merging hdlc/hdlc-next (4a6908a Linux 2.6.28)
Merging drm/drm-next (08aa3fe Merge branch 'drm-plane-jbarnes' into drm-core-next)
$ git reset --hard HEAD^
Merging refs/next/20111115/drm
Merging fbdev/fbdev-next (64cebcb Merge branch 'fbdev-for-linus' into fbdev-next)
Merging viafb/viafb-next (4ce36bb viafb: replace strict_strtoul to kstrto* and check return value)
Merging omap_dss2/for-next (3e28189 OMAPDSS: picodlp: add missing #include <linux/module.h>)
Merging regulator/for-next (924ee2c Merge remote-tracking branch 'regulator/topic/dt' into regulator-next)
$ git reset --hard HEAD^
Merging refs/next/20111123/regulator
Merging security/next (de35353 digsig: build dependency fix)
Merging selinux/master (ded5098 SELinux: skip file_name_trans_write() when policy downgraded.)
Merging lblnet/master (7e27d6e Linux 2.6.35-rc3)
Merging watchdog/linux-next (20403e8 watchdog: fix initialisation printout in s3c2410_wdt)
Merging bdev/master (feaf384 Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block)
Merging dwmw2-iommu/master (c3b92c8 Linux 3.1)
Merging iommu/next (a7e892e Merge branches 'iommu/fixes', 'iommu/page-sizes' and 'iommu/group-id' into next)
Merging cputime/cputime (c5927fe [S390] cputime: add sparse checking and cleanup)
Merging osd/linux-next (dde406e pnfs-obj: Support for RAID5 read-4-write interface.)
Merging jc_docs/docs-next (5c050fb docs: update the development process document)
Merging nommu/master (0ce790e Linux 2.6.39-rc1)
Merging trivial/for-next (7e0ea2e sound: Kconfig: drop unknown symbol ARCH_CLPS7500)
Merging audit/for-next (def5754 Audit: remove spaces from audit_log_d_path)
Merging pm/linux-next (4c67d17 Merge branch 'pm-freezer' into linux-next)
Merging apm/for-next (282e5aa x86: Kconfig: drop unknown symbol 'APM_MODULE')
Merging fsnotify/for-next (ef9bf3b fanotify: only destroy a mark if both its mask and its ignored_mask are cleared)
Merging irda/for-next (94d57c4 enic: Update MAINTAINERS)
Merging edac/linux_next (4d096ca MAINTAINERS: add an entry for Edac Sandy Bridge driver)
Merging edac-amd/for-next (1f6189e amd64_edac: Cleanup return type of amd64_determine_edac_cap())
Merging devicetree/devicetree/next (ae97159 of_mdio: Don't phy_scan_fixups() twice)
Merging spi/spi/next (940ab88 drivercore: Add helper macro for platform_driver boilerplate)
Merging gpio/gpio/next (d92ef29 h8300: Move gpio.h to gpio-internal.h)
Merging tip/auto-latest (e79d72b Merge branch 'sched/core' into auto-latest)
CONFLICT (content): Merge conflict in arch/mips/kernel/perf_event_mipsxx.c
Merging rcu/rcu/next (afe24b1 rcu: Move propagation of ->completed from rcu_start_gp() to rcu_report_qs_rsp())
Merging uprobes/for-next (b23a347 x86: skip singlestep where possible)
Merging cgroup/for-next (41dfa07 cgroup_freezer: fix freezing groups with stopped tasks)
CONFLICT (content): Merge conflict in kernel/cgroup_freezer.c
Merging kmemleak/kmemleak (99781ba kmemleak: Add support for memory hotplug)
Merging kvm/kvm-updates/3.2 (a3e06bb KVM: emulate lapic tsc deadline timer for guest)
Merging oprofile/for-next (de346b6 Merge branch 'perf/core' into oprofile/master)
Merging xen/upstream/xen (ec8161f Merge branch 'upstream/microcode' into upstream/xen)
CONFLICT (content): Merge conflict in arch/x86/xen/Kconfig
Merging xen-two/linux-next (306e4b3 Merge branch 'stable/for-linus-3.3' into linux-next)
CONFLICT (content): Merge conflict in arch/x86/xen/Kconfig
Merging xen-pvhvm/linux-next (b056b6a xen: suspend: remove xen_hvm_suspend)
Merging percpu/for-next (67589c7 percpu: explain why per_cpu_ptr_to_phys() is more complicated than necessary)
Merging workqueues/for-next (9c5a2ba workqueue: separate out drain_workqueue() from destroy_workqueue())
Merging sfi/sfi-test (5b026c4 SFI: use ioremap_cache() instead of ioremap())
Merging asm-generic/next (35dbc0e asm-generic/io.h: allow people to override individual funcs)
Merging drivers-x86/linux-next (15b956a acer-wmi: support Lenovo ideapad S205 wifi switch)
Merging hwpoison/hwpoison (46e387b Merge branch 'hwpoison-hugepages' into hwpoison)
Merging sysctl/master (c2f5631 sysctl: remove impossible condition check)
Merging namespace/master (7e05c93 proc: Fix the proc access checks to namespace files.)
Merging regmap/for-next (cce585c regmap: Fix rbtreee build when not using debugfs)
Merging hsi/for-next (a8b4dea HSI: hsi_char: Update ioctl-number.txt)
Merging driver-core/driver-core-next (03e099f debugfs: bugfix: include <linux/io.h> in file.c)
Merging tty/tty-next (161e773 UART: add CSR SiRFprimaII SoC on-chip uart drivers)
CONFLICT (content): Merge conflict in drivers/tty/tty_ldisc.c
CONFLICT (content): Merge conflict in drivers/tty/serial/Makefile
CONFLICT (content): Merge conflict in drivers/tty/serial/Kconfig
Merging usb/usb-next (3af5154 usb: Netlogic: Use CPU_XLR in place of NLM_XLR)
Merging staging/staging-next (cfcfc9e Linux 3.2-rc2)
Merging char-misc/char-misc-next (7f3379d misc: ad525x_dpot: Add support for SPI module device table matching)
Merging bkl-config/config (4ba8216 BKL: That's all, folks)
Merging tmem/tmem (665c1e6 mm: cleancache: Use __read_mostly as appropiate.)
CONFLICT (content): Merge conflict in mm/swapfile.c
Merging writeback/writeback-for-next (c37a78e fs: Make write(2) interruptible by SIGKILL)
Merging arm-dt/devicetree/arm-next (ede338f dt: add documentation of ARM dt boot interface)
Merging hwspinlock/linux-next (8b37fcf hwspinlock: add MAINTAINERS entries)
Merging pinctrl/for-next (24118d0 pinctrl: GPIO direction support for muxing)
Merging moduleh/for-sfr (6aec187 drivers/media: video/a5k6aa is a module and so needs module.h)
Merging kvmtool/master (e1b4024 kvm tools: Add event idx support to virtio-blk)
CONFLICT (content): Merge conflict in scripts/kconfig/Makefile
CONFLICT (content): Merge conflict in include/net/9p/9p.h
Merging scsi-post-merge/merge-base:master ()
$ git checkout akpm
Applying: vmscan: fix initial shrinker size handling
Applying: vmscan: use atomic-long for shrinker batching
Applying: net/netfilter/nf_conntrack_netlink.c: fix Oops on container destroy
Applying: acerhdf: add support for Aspire 1410 BIOS v1.3314
Applying: acerhdf: add support for new hardware
Applying: acerhdf: lowered default temp fanon/fanoff values
Applying: arch/x86/platform/iris/iris.c: register a platform device and a platform driver
Applying: x86: fix mmap random address range
Applying: arch/x86/kernel/e820.c: eliminate bubble sort from sanitize_e820_map
Applying: x86: rtc: don't register a platform RTC device for Intel MID platforms
Applying: mrst: battery fixes
Applying: arch/x86/kernel/e820.c: quiet sparse noise about plain integer as NULL pointer
Applying: arch/x86/kernel/ptrace.c: quiet sparse noise
Applying: arch/x86/mm/pageattr.c: quiet sparse noise; local functions should be static
Applying: x86: tlb flush avoid superflous leave_mm()
Applying: x86: reduce clock calibration time during slave cpu startup
Applying: x86/paravirt: PTE updates in k(un)map_atomic need to be synchronous, regardless of lazy_mmu mode
Applying: arch/arm/mach-ux500/mbox-db5500.c: world-writable sysfs fifo file
Applying: arm, exec: remove redundant set_fs(USER_DS)
Applying: drivers/edac/mpc85xx_edac.c: fix memory controller compatible for edac
Applying: drivers/gpu/vga/vgaarb.c: add missing kfree
Applying: drm: avoid switching to text console if there is no panic timeout
Applying: hrtimers: Special-case zero length sleeps
Applying: ia64, exec: remove redundant set_fs(USER_DS)
Applying: ipc/mqueue: cleanup definition names and locations
Applying: ipc/mqueue: switch back to using non-max values on create
Applying: ipc/mqueue: enforce hard limits
Applying: ipc/mqueue: update maximums for the mqueue subsystem
Applying: ipc-mqueue-update-maximums-for-the-mqueue-subsystem-fix
Applying: ipc-mqueue-update-maximums-for-the-mqueue-subsystem-checkpatch-fixes
Applying: debugobjects: be smarter about static objects
Applying: debugobjects: extend to assert that an object is initialized
Applying: kernel/timer.c: use debugobjects to catch deletion of uninitialized timers
Applying: ext4: use proper little-endian bitops
Applying: ocfs2: avoid unaligned access to dqc_bitmap
Applying: parisc, exec: remove redundant set_fs(USER_DS)
Applying: scsi: fix a header to include linux/types.h
Applying: drivers/scsi/megaraid.c: fix sparse warnings
Applying: drivers/scsi/aacraid/commctrl.c: fix mem leak in aac_send_raw_srb()
Applying: drivers/scsi/sg.c: convert to kstrtoul_from_user()
Applying: drivers/scsi/mpt2sas/mpt2sas_base.c: fix mismatch in mpt2sas_base_hard_reset_handler() mutex lock-unlock
Applying: drivers/message/fusion/mptbase.c: ensure NUL-termination of MptCallbacksName elements
Applying: MAINTAINERS: Staging: cx25821: Add L: linux-media
Applying: mm/page-writeback.c: make determine_dirtyable_memory static again
Applying: vmscan: promote shared file mapped pages
Applying: vmscan: activate executable pages after first usage
Applying: mm: add free_hot_cold_page_list() helper
Applying: mm-add-free_hot_cold_page_list-helper-v2
Applying: mm-add-free_hot_cold_page_list-helper-v3
Applying: mm: remove unused pagevec_free
Applying: mm-tracepoint: rename page-free events
Applying: mm-tracepoint: fix documentation and examples
Applying: mm: fix page-faults detection in swap-token logic
Applying: mm: add extra free kbytes tunable
Applying: mm-add-extra-free-kbytes-tunable-update
Applying: mm-add-extra-free-kbytes-tunable-update-checkpatch-fixes
Applying: mm: migrate: one less atomic operation
Applying: mm: do not stall in synchronous compaction for THP allocations
Applying: mm-do-not-stall-in-synchronous-compaction-for-thp-allocations-v3
Applying: mm: avoid livelock on !__GFP_FS allocations
Applying: mm-avoid-livelock-on-__gfp_fs-allocations-fix
Applying: mm: reduce the amount of work done when updating min_free_kbytes
Applying: mm-reduce-the-amount-of-work-done-when-updating-min_free_kbytes-checkpatch-fixes
Applying: thp: reduce khugepaged freezing latency
Applying: hpet: factor timer allocate from open
Applying: intel_idle: fix API misuse
Applying: intel_idle: disable auto_demotion for hotplugged CPUs
Applying: kernel.h: neaten panic prototype
Applying: include/linux/linkage.h: remove unused NORET_AND macro
Applying: treewide: remove useless NORET_TYPE macro and uses
Applying: treewide: convert uses of ATTRIB_NORETURN to __noreturn
Applying: treewide-convert-uses-of-attrib_noreturn-to-__noreturn-checkpatch-fixes
Applying: include/linux/linkage.h: remove unused ATTRIB_NORET macro
Applying: mm,slub,x86: decouple size of struct page from CONFIG_CMPXCHG_LOCAL
Applying: mm,x86,um: move CMPXCHG_LOCAL config option
Applying: mm,x86,um: move CMPXCHG_DOUBLE config option
Applying: audit: always follow va_copy() with va_end()
Applying: brlocks/lglocks: clean up code
Applying: brlocks-lglocks-clean-up-code-checkpatch-fixes
Applying: get_maintainers.pl: follow renames when looking up commit signers
Applying: checkpatch: update signature "might be better as" warning
Applying: checkpatch: prefer __printf over __attribute__((format(printf,...)))
Applying: crc32: optimize inner loop
Applying: epoll: limit paths
Applying: cgroups: add res_counter_write_u64() API
Applying: cgroups: new resource counter inheritance API
Applying: cgroups: add previous cgroup in can_attach_task/attach_task callbacks
Applying: cgroups: new cancel_attach_task() subsystem callback
Applying: cgroups: ability to stop res charge propagation on bounded ancestor
Applying: cgroups: add res counter common ancestor searching
Applying: res_counter: allow charge failure pointer to be null
Applying: cgroups: pull up res counter charge failure interpretation to caller
Applying: cgroups: allow subsystems to cancel a fork
Applying: cgroups: add a task counter subsystem
Applying: cgroups: ERR_PTR needs err.h
Applying: cgroup: Fix task counter common ancestor logic
Applying: cgroup-fix-task-counter-common-ancestor-logic-checkpatch-fixes
Applying: mm: memcg: consolidate hierarchy iteration primitives
Applying: mm: vmscan: distinguish global reclaim from global LRU scanning
Applying: mm: vmscan: distinguish between memcg triggering reclaim and memcg being scanned
Applying: mm-vmscan-distinguish-between-memcg-triggering-reclaim-and-memcg-being-scanned-checkpatch-fixes
Applying: mm: memcg: per-priority per-zone hierarchy scan generations
Applying: mm: move memcg hierarchy reclaim to generic reclaim code
Applying: mm: memcg: remove optimization of keeping the root_mem_cgroup LRU lists empty
Applying: mm: vmscan: convert global reclaim to per-memcg LRU lists
Applying: mm: collect LRU list heads into struct lruvec
Applying: mm: make per-memcg LRU lists exclusive
Applying: mm: memcg: remove unused node/section info from pc->flags
Applying: mm: memcg: remove unused node/section info from pc->flags fix
Applying: procfs: make proc_get_link to use dentry instead of inode
Applying: procfs: introduce the /proc/<pid>/map_files/ directory
Applying: procfs-introduce-the-proc-pid-map_files-directory-checkpatch-fixes
Applying: workqueue: make alloc_workqueue() take printf fmt and args for name
Applying: workqueue-make-alloc_workqueue-take-printf-fmt-and-args-for-name-fix
Applying: cpumask: update setup_node_to_cpumask_map() comments
Applying: kdump: add missing RAM resource in crash_shrink_memory()
Applying: kdump: fix crash_kexec()/smp_send_stop() race in panic
Applying: kdump: Add udev events for memory online/offline
Applying: ipc/mqueue: simplify reading msgqueue limit
Applying: ipc/sem.c: alternatives to preempt_disable()
Applying: fs/direct-io.c: calculate fs_count correctly in get_more_blocks()
Applying: vfs: cache request_queue in struct block_device
Applying: dio: optimize cache misses in the submission path
Applying: dio-optimize-cache-misses-in-the-submission-path-v2-checkpatch-fixes
Applying: dio: using prefetch requires including prefetch.h
Applying: ramoops: update parameters only after successful init
Merging akpm (72f3c13 ramoops: update parameters only after successful init)
Applying: freezer: fix more fallout from the thaw_process rename

[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: linux-next: Tree for Nov 24 (fs/pnfs vs. exofs)
  2011-11-24  6:43 linux-next: Tree for Nov 24 Stephen Rothwell
@ 2011-11-24 18:50 ` Randy Dunlap
  2011-11-29  0:09   ` Boaz Harrosh
  0 siblings, 1 reply; 17+ messages in thread
From: Randy Dunlap @ 2011-11-24 18:50 UTC (permalink / raw)
  To: Stephen Rothwell; +Cc: linux-next, LKML, Boaz Harrosh, Benny Halevy

[-- Attachment #1: Type: text/plain, Size: 1006 bytes --]

On 11/23/2011 10:43 PM, Stephen Rothwell wrote:
> Hi all,
> 
> Changes since 20111123:


When CONFIG_EXOFS is not enabled:

fs/built-in.o: In function `objio_alloc_io_state':
objio_osd.c:(.text+0xcb525): undefined reference to `ore_get_rw_state'
fs/built-in.o: In function `_write_done':
objio_osd.c:(.text+0xcb58d): undefined reference to `ore_check_io'
fs/built-in.o: In function `_read_done':
objio_osd.c:(.text+0xcb5bf): undefined reference to `ore_check_io'
fs/built-in.o: In function `objio_alloc_lseg':
(.text+0xcb9a4): undefined reference to `ore_verify_layout'
fs/built-in.o: In function `objio_free_result':
(.text+0xcbb0e): undefined reference to `ore_put_io_state'
fs/built-in.o: In function `objio_read_pagelist':
(.text+0xcbc9b): undefined reference to `ore_read'
fs/built-in.o: In function `objio_write_pagelist':
(.text+0xcbd4e): undefined reference to `ore_write'


Full randconfig file is attached.

-- 
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***

[-- Attachment #2: config-ore --]
[-- Type: text/plain, Size: 64075 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/i386 3.2.0-rc2 Kernel Configuration
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
CONFIG_KTIME_SCALAR=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_KERNEL_XZ=y
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_FHANDLE=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
CONFIG_HAVE_GENERIC_HARDIRQS=y

#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_RESOURCE_COUNTERS is not set
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
CONFIG_USER_NS=y
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_PERF_COUNTERS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
# CONFIG_JUMP_LABEL is not set
# CONFIG_UPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLK_DEV_THROTTLING=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
CONFIG_INLINE_SPIN_UNLOCK=y
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
CONFIG_INLINE_READ_UNLOCK=y
# CONFIG_INLINE_READ_UNLOCK_BH is not set
CONFIG_INLINE_READ_UNLOCK_IRQ=y
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
CONFIG_INLINE_WRITE_UNLOCK=y
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_SMP=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_X86_32_IRIS=y
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_KVMTOOL_TEST_ENABLE=y
CONFIG_PARAVIRT_GUEST=y
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
# CONFIG_XEN_PRIVILEGED_GUEST is not set
CONFIG_KVM_CLOCK=y
CONFIG_KVM_GUEST=y
CONFIG_LGUEST_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_SPINLOCKS is not set
CONFIG_PARAVIRT_CLOCK=y
CONFIG_PARAVIRT_DEBUG=y
CONFIG_NO_BOOTMEM=y
CONFIG_MEMTEST=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
CONFIG_M686=y
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=5
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_X86_XADD=y
# CONFIG_X86_PPRO_FENCE is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=5
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
# CONFIG_HPET_TIMER is not set
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
CONFIG_NR_CPUS=8
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
# CONFIG_X86_ANCIENT_MCE is not set
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=y
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_VM86=y
CONFIG_TOSHIBA=y
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
# CONFIG_X86_CPUID is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
# CONFIG_HWPOISON_INJECT is not set
# CONFIG_TRANSPARENT_HUGEPAGE is not set
# CONFIG_CLEANCACHE is not set
CONFIG_HIGHPTE=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MATH_EMULATION=y
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
# CONFIG_SECCOMP is not set
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
# CONFIG_SCHED_HRTICK is not set
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x1000000
# CONFIG_HOTPLUG_CPU is not set
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
# CONFIG_PM_RUNTIME is not set
# CONFIG_ACPI is not set
CONFIG_SFI=y

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# CONFIG_CPU_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEBUG=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_DEBUG=y
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
CONFIG_MCA=y
CONFIG_MCA_LEGACY=y
# CONFIG_MCA_PROC_FS is not set
# CONFIG_SCx200 is not set
# CONFIG_OLPC is not set
CONFIG_ALIX=y
CONFIG_AMD_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_RAPIDIO is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y

#
# Networking options
#
# CONFIG_PACKET is not set
# CONFIG_UNIX is not set
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE_DEMUX=y
CONFIG_NET_IPGRE=y
# CONFIG_NET_IPGRE_BROADCAST is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
# CONFIG_IPV6_ROUTER_PREF is not set
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
# CONFIG_INET6_IPCOMP is not set
CONFIG_IPV6_MIP6=y
# CONFIG_INET6_XFRM_TUNNEL is not set
CONFIG_INET6_TUNNEL=y
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=y
CONFIG_IPV6_SIT=y
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=y
# CONFIG_IPV6_MULTIPLE_TABLES is not set
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
# CONFIG_IPV6_PIMSM_V2 is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
# CONFIG_NETFILTER is not set
CONFIG_IP_DCCP=y
CONFIG_INET_DCCP_DIAG=y

#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
# CONFIG_IP_DCCP_CCID3 is not set

#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
CONFIG_IP_SCTP=y
CONFIG_SCTP_DBG_MSG=y
CONFIG_SCTP_DBG_OBJCNT=y
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
CONFIG_RDS=y
# CONFIG_RDS_TCP is not set
# CONFIG_RDS_DEBUG is not set
CONFIG_TIPC=y
# CONFIG_TIPC_ADVANCED is not set
CONFIG_TIPC_DEBUG=y
# CONFIG_ATM is not set
CONFIG_L2TP=y
CONFIG_L2TP_DEBUGFS=y
# CONFIG_L2TP_V3 is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
# CONFIG_BRIDGE_IGMP_SNOOPING is not set
CONFIG_NET_DSA=y
# CONFIG_NET_DSA_TAG_DSA is not set
CONFIG_NET_DSA_TAG_EDSA=y
CONFIG_NET_DSA_TAG_TRAILER=y
CONFIG_NET_DSA_MV88E6XXX=y
CONFIG_NET_DSA_MV88E6060=y
# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
# CONFIG_NET_DSA_MV88E6131 is not set
CONFIG_NET_DSA_MV88E6123_61_65=y
CONFIG_VLAN_8021Q=y
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
CONFIG_LLC2=y
# CONFIG_IPX is not set
CONFIG_ATALK=y
# CONFIG_DEV_APPLETALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
# CONFIG_NET_SCH_HTB is not set
CONFIG_NET_SCH_HFSC=y
# CONFIG_NET_SCH_PRIO is not set
CONFIG_NET_SCH_MULTIQ=y
CONFIG_NET_SCH_RED=y
CONFIG_NET_SCH_SFB=y
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
CONFIG_NET_SCH_TBF=y
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
CONFIG_NET_SCH_NETEM=y
CONFIG_NET_SCH_DRR=y
# CONFIG_NET_SCH_MQPRIO is not set
CONFIG_NET_SCH_CHOKE=y
# CONFIG_NET_SCH_QFQ is not set

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=y
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
CONFIG_NET_CLS_FW=y
CONFIG_NET_CLS_U32=y
# CONFIG_CLS_U32_PERF is not set
# CONFIG_CLS_U32_MARK is not set
# CONFIG_NET_CLS_RSVP is not set
CONFIG_NET_CLS_RSVP6=y
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_CLS_CGROUP is not set
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=y
# CONFIG_BATMAN_ADV_DEBUG is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_NETPRIO_CGROUP is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
CONFIG_CAN=y
# CONFIG_CAN_RAW is not set
# CONFIG_CAN_BCM is not set
CONFIG_CAN_GW=y

#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=y
CONFIG_CAN_SLCAN=y
# CONFIG_CAN_DEV is not set
CONFIG_CAN_DEBUG_DEVICES=y
CONFIG_IRDA=y

#
# IrDA protocols
#
# CONFIG_IRLAN is not set
# CONFIG_IRNET is not set
CONFIG_IRCOMM=y
# CONFIG_IRDA_ULTRA is not set

#
# IrDA options
#
# CONFIG_IRDA_CACHE_LAST_LSAP is not set
CONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
CONFIG_IRTTY_SIR=y

#
# Dongle support
#
# CONFIG_DONGLE is not set
CONFIG_KINGSUN_DONGLE=y
CONFIG_KSDAZZLE_DONGLE=y
CONFIG_KS959_DONGLE=y

#
# FIR device drivers
#
CONFIG_USB_IRDA=y
# CONFIG_SIGMATEL_FIR is not set
# CONFIG_NSC_FIR is not set
# CONFIG_WINBOND_FIR is not set
CONFIG_TOSHIBA_FIR=y
# CONFIG_SMC_IRCC_FIR is not set
CONFIG_ALI_FIR=y
# CONFIG_VLSI_FIR is not set
# CONFIG_VIA_FIR is not set
CONFIG_MCS_FIR=y
CONFIG_BT=y
CONFIG_BT_L2CAP=y
CONFIG_BT_SCO=y
CONFIG_BT_RFCOMM=y
# CONFIG_BT_RFCOMM_TTY is not set
# CONFIG_BT_BNEP is not set

#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=y
CONFIG_BT_HCIBTSDIO=y
# CONFIG_BT_HCIUART is not set
CONFIG_BT_HCIBCM203X=y
CONFIG_BT_HCIBPA10X=y
CONFIG_BT_HCIBFUSB=y
# CONFIG_BT_HCIVHCI is not set
# CONFIG_BT_MRVL is not set
# CONFIG_BT_ATH3K is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_LIB80211 is not set

#
# CFG80211 needs to be enabled for MAC80211
#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_RFKILL_REGULATOR is not set
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_DEBUG is not set
CONFIG_CAIF=y
CONFIG_CAIF_DEBUG=y
CONFIG_CAIF_NETDEV=y
CONFIG_CEPH_LIB=y
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
# CONFIG_NFC is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_DEBUG_DRIVER=y
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_CONNECTOR=y
# CONFIG_PROC_EVENTS is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_CPQ_DA=y
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
CONFIG_BLK_DEV_UMEM=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_OSD=y
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_UB=y
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_RBD=y
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_MISC_DEVICES=y
CONFIG_AD525X_DPOT=y
# CONFIG_AD525X_DPOT_I2C is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
CONFIG_INTEL_MID_PTI=y
CONFIG_SGI_IOC4=y
CONFIG_TIFM_CORE=y
CONFIG_TIFM_7XX1=y
CONFIG_ICS932S401=y
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_HP_ILO=y
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
CONFIG_SENSORS_TSL2550=y
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
CONFIG_SENSORS_APDS990X=y
# CONFIG_HMC6352 is not set
CONFIG_DS1682=y
CONFIG_VMWARE_BALLOON=y
# CONFIG_BMP085 is not set
# CONFIG_PCH_PHUB is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
CONFIG_C2PORT=y
CONFIG_C2PORT_DURAMAR_2150=y

#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_LEGACY=y
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=y
CONFIG_CB710_CORE=y
CONFIG_CB710_DEBUG=y
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
CONFIG_IWMC3200TOP=y
CONFIG_IWMC3200TOP_DEBUG=y
CONFIG_IWMC3200TOP_DEBUGFS=y

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# CONFIG_SENSORS_LIS3_I2C is not set

#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=y
CONFIG_HAVE_IDE=y
CONFIG_IDE=y

#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_ATAPI=y
CONFIG_BLK_DEV_IDE_SATA=y
# CONFIG_IDE_GD is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_BLK_DEV_IDETAPE=y
CONFIG_IDE_TASK_IOCTL=y
CONFIG_IDE_PROC_FS=y

#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y

#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_PCIBUS_ORDER is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_AEC62XX=y
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
CONFIG_BLK_DEV_TRIFLEX=y
CONFIG_BLK_DEV_CS5520=y
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
CONFIG_BLK_DEV_CS5536=y
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
CONFIG_BLK_DEV_IT821X=y
# CONFIG_BLK_DEV_NS87415 is not set
CONFIG_BLK_DEV_PDC202XX_OLD=y
CONFIG_BLK_DEV_PDC202XX_NEW=y
CONFIG_BLK_DEV_SVWKS=y
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
CONFIG_BLK_DEV_SLC90E66=y
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
# CONFIG_BLK_DEV_SD is not set
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_FC_TGT_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
CONFIG_SCSI_OSD_INITIATOR=y
CONFIG_SCSI_OSD_ULD=y
CONFIG_SCSI_OSD_DPRINT_SENSE=1
# CONFIG_SCSI_OSD_DEBUG is not set
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
# CONFIG_MD_AUTODETECT is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
CONFIG_MD_RAID10=y
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
CONFIG_MD_FAULTY=y
# CONFIG_BLK_DEV_DM is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=y
# CONFIG_FIREWIRE_OHCI is not set
# CONFIG_FIREWIRE_SBP2 is not set
CONFIG_FIREWIRE_NET=y
CONFIG_FIREWIRE_NOSY=y
CONFIG_I2O=y
# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_CONFIG=y
# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
# CONFIG_I2O_BUS is not set
CONFIG_I2O_BLOCK=y
CONFIG_I2O_SCSI=y
CONFIG_I2O_PROC=y
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
CONFIG_BONDING=y
CONFIG_DUMMY=y
CONFIG_EQUALIZER=y
CONFIG_NET_FC=y
CONFIG_MII=y
CONFIG_NET_TEAM=y
# CONFIG_NET_TEAM_MODE_ROUNDROBIN is not set
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=y
CONFIG_MACVLAN=y
CONFIG_MACVTAP=y
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=y
# CONFIG_VETH is not set
CONFIG_VIRTIO_NET=y
CONFIG_ARCNET=y
CONFIG_ARCNET_1201=y
# CONFIG_ARCNET_1051 is not set
# CONFIG_ARCNET_RAW is not set
CONFIG_ARCNET_CAP=y
# CONFIG_ARCNET_COM90xx is not set
CONFIG_ARCNET_COM90xxIO=y
# CONFIG_ARCNET_RIM_I is not set
CONFIG_ARCNET_COM20020=y
CONFIG_ARCNET_COM20020_PCI=y

#
# CAIF transport drivers
#
CONFIG_CAIF_TTY=y
# CONFIG_CAIF_SPI_SLAVE is not set
# CONFIG_CAIF_HSI is not set
# CONFIG_ETHERNET is not set
# CONFIG_FDDI is not set
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=y
CONFIG_ROADRUNNER_LARGE_RINGS=y
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_QSEMI_PHY=y
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
CONFIG_VITESSE_PHY=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
CONFIG_LSI_ET1011C_PHY=y
# CONFIG_MICREL_PHY is not set
# CONFIG_FIXED_PHY is not set
CONFIG_MDIO_BITBANG=y
# CONFIG_MDIO_GPIO is not set
CONFIG_PPP=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPP_DEFLATE=y
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_MPPE=y
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPPOE=y
# CONFIG_PPTP is not set
# CONFIG_PPPOL2TP is not set
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
# CONFIG_SLIP is not set
CONFIG_SLHC=y
# CONFIG_TR is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8150=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
CONFIG_USB_NET_CDCETHER=y
# CONFIG_USB_NET_CDC_EEM is not set
# CONFIG_USB_NET_CDC_NCM is not set
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_SMSC75XX is not set
# CONFIG_USB_NET_SMSC95XX is not set
# CONFIG_USB_NET_GL620A is not set
CONFIG_USB_NET_NET1080=y
# CONFIG_USB_NET_PLUSB is not set
CONFIG_USB_NET_MCS7830=y
CONFIG_USB_NET_RNDIS_HOST=y
# CONFIG_USB_NET_CDC_SUBSET is not set
CONFIG_USB_NET_ZAURUS=y
CONFIG_USB_NET_CX82310_ETH=y
# CONFIG_USB_NET_KALMIA is not set
CONFIG_USB_NET_INT51X1=y
# CONFIG_USB_IPHETH is not set
CONFIG_USB_SIERRA_NET=y
CONFIG_USB_VL600=y
# CONFIG_WLAN is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
CONFIG_VMXNET3=y
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
# CONFIG_INPUT_SPARSEKMAP is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5520 is not set
CONFIG_KEYBOARD_ADP5588=y
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_QT1070=y
CONFIG_KEYBOARD_QT2160=y
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
CONFIG_KEYBOARD_GPIO_POLLED=y
CONFIG_KEYBOARD_TCA6416=y
CONFIG_KEYBOARD_TCA8418=y
CONFIG_KEYBOARD_MATRIX=y
# CONFIG_KEYBOARD_LM8323 is not set
CONFIG_KEYBOARD_MAX7359=y
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
CONFIG_KEYBOARD_NEWTON=y
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_SUNKBD=y
# CONFIG_KEYBOARD_STMPE is not set
CONFIG_KEYBOARD_TC3589X=y
# CONFIG_KEYBOARD_TWL4030 is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
CONFIG_JOYSTICK_COBRA=y
CONFIG_JOYSTICK_GF2K=y
CONFIG_JOYSTICK_GRIP=y
CONFIG_JOYSTICK_GRIP_MP=y
CONFIG_JOYSTICK_GUILLEMOT=y
CONFIG_JOYSTICK_INTERACT=y
CONFIG_JOYSTICK_SIDEWINDER=y
# CONFIG_JOYSTICK_TMDC is not set
CONFIG_JOYSTICK_IFORCE=y
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=y
CONFIG_JOYSTICK_MAGELLAN=y
CONFIG_JOYSTICK_SPACEORB=y
CONFIG_JOYSTICK_SPACEBALL=y
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
CONFIG_JOYSTICK_ZHENHUA=y
# CONFIG_JOYSTICK_AS5011 is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
CONFIG_JOYSTICK_XPAD=y
# CONFIG_JOYSTICK_XPAD_FF is not set
# CONFIG_JOYSTICK_XPAD_LEDS is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
CONFIG_TOUCHSCREEN_BU21013=y
CONFIG_TOUCHSCREEN_CY8CTMG110=y
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
CONFIG_TOUCHSCREEN_HAMPSHIRE=y
CONFIG_TOUCHSCREEN_EETI=y
CONFIG_TOUCHSCREEN_EGALAX=y
CONFIG_TOUCHSCREEN_FUJITSU=y
CONFIG_TOUCHSCREEN_GUNZE=y
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
CONFIG_TOUCHSCREEN_MAX11801=y
CONFIG_TOUCHSCREEN_MCS5000=y
# CONFIG_TOUCHSCREEN_MTOUCH is not set
CONFIG_TOUCHSCREEN_INEXIO=y
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
CONFIG_TOUCHSCREEN_TOUCHWIN=y
CONFIG_TOUCHSCREEN_WM831X=y
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
CONFIG_TOUCHSCREEN_TSC2007=y
# CONFIG_TOUCHSCREEN_ST1232 is not set
CONFIG_TOUCHSCREEN_STMPE=y
CONFIG_TOUCHSCREEN_TPS6507X=y
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_SERIO_ALTERA_PS2=y
CONFIG_SERIO_PS2MULT=y
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
CONFIG_GAMEPORT_L4=y
CONFIG_GAMEPORT_EMU10K1=y
# CONFIG_GAMEPORT_FM801 is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_NOZOMI=y
CONFIG_N_GSM=y
# CONFIG_TRACE_SINK is not set
CONFIG_DEVKMEM=y

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_MCA=y

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_UARTLITE=y
# CONFIG_SERIAL_UARTLITE_CONSOLE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_TIMBERDALE=y
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
# CONFIG_IPMI_DEVICE_INTERFACE is not set
CONFIG_IPMI_SI=y
# CONFIG_IPMI_WATCHDOG is not set
# CONFIG_IPMI_POWEROFF is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=y
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
# CONFIG_HW_RANDOM_GEODE is not set
# CONFIG_HW_RANDOM_VIA is not set
# CONFIG_HW_RANDOM_VIRTIO is not set
CONFIG_NVRAM=y
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
CONFIG_R3964=y
CONFIG_APPLICOM=y
CONFIG_SONYPI=y
CONFIG_MWAVE=y
# CONFIG_PC8736x_GPIO is not set
CONFIG_NSC_GPIO=y
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS=y
# CONFIG_TCG_NSC is not set
CONFIG_TCG_ATMEL=y
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_RAMOOPS is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_MUX=y

#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_MUX_GPIO is not set
CONFIG_I2C_MUX_PCA9541=y
# CONFIG_I2C_MUX_PCA954x is not set
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_SMBUS=y

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=y
CONFIG_I2C_ALI1563=y
CONFIG_I2C_ALI15X3=y
CONFIG_I2C_AMD756=y
CONFIG_I2C_AMD756_S4882=y
CONFIG_I2C_AMD8111=y
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=y
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_NFORCE2=y
# CONFIG_I2C_NFORCE2_S4985 is not set
CONFIG_I2C_SIS5595=y
# CONFIG_I2C_SIS630 is not set
CONFIG_I2C_SIS96X=y
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE_PCI is not set
CONFIG_I2C_GPIO=y
CONFIG_I2C_INTEL_MID=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
CONFIG_I2C_SIMTEC=y
# CONFIG_I2C_XILINX is not set
# CONFIG_I2C_EG20T is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
CONFIG_I2C_PARPORT_LIGHT=y
CONFIG_I2C_TAOS_EVM=y
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_SCx200_ACB is not set
CONFIG_I2C_DEBUG_CORE=y
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
# CONFIG_HSI is not set

#
# PPS support
#
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
# CONFIG_PPS_CLIENT_LDISC is not set
CONFIG_PPS_CLIENT_GPIO=y

#
# PPS generators support
#

#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_DEBUG_GPIO=y
# CONFIG_GPIO_SYSFS is not set
CONFIG_GPIO_MAX730X=y

#
# Memory mapped GPIO drivers:
#
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_VX855 is not set

#
# I2C GPIO expanders:
#
CONFIG_GPIO_MAX7300=y
# CONFIG_GPIO_MAX732X is not set
CONFIG_GPIO_PCA953X=y
# CONFIG_GPIO_PCA953X_IRQ is not set
CONFIG_GPIO_PCF857X=y
# CONFIG_GPIO_SX150X is not set
# CONFIG_GPIO_STMPE is not set
CONFIG_GPIO_TC3589X=y
# CONFIG_GPIO_TPS65912 is not set
CONFIG_GPIO_TWL4030=y
# CONFIG_GPIO_WM831X is not set
# CONFIG_GPIO_ADP5520 is not set
CONFIG_GPIO_ADP5588=y
CONFIG_GPIO_ADP5588_IRQ=y

#
# PCI GPIO expanders:
#
CONFIG_GPIO_BT8XX=y
# CONFIG_GPIO_LANGWELL is not set
# CONFIG_GPIO_PCH is not set
CONFIG_GPIO_ML_IOH=y
# CONFIG_GPIO_TIMBERDALE is not set
# CONFIG_GPIO_RDC321X is not set

#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MCP23S08 is not set

#
# AC97 GPIO expanders:
#

#
# MODULbus GPIO expanders:
#
CONFIG_GPIO_TPS65910=y
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
# CONFIG_PDA_POWER is not set
# CONFIG_WM831X_BACKUP is not set
# CONFIG_WM831X_POWER is not set
CONFIG_TEST_POWER=y
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2782 is not set
CONFIG_BATTERY_BQ20Z75=y
CONFIG_BATTERY_BQ27x00=y
# CONFIG_BATTERY_BQ27X00_I2C is not set
CONFIG_BATTERY_BQ27X00_PLATFORM=y
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_ISP1704 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_TWL4030 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_MAX8997 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
CONFIG_SENSORS_ABITUGURU3=y
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
CONFIG_SENSORS_ADM1025=y
CONFIG_SENSORS_ADM1026=y
# CONFIG_SENSORS_ADM1029 is not set
CONFIG_SENSORS_ADM1031=y
CONFIG_SENSORS_ADM9240=y
# CONFIG_SENSORS_ADT7411 is not set
CONFIG_SENSORS_ADT7462=y
CONFIG_SENSORS_ADT7470=y
CONFIG_SENSORS_ADT7475=y
CONFIG_SENSORS_ASC7621=y
CONFIG_SENSORS_K8TEMP=y
# CONFIG_SENSORS_K10TEMP is not set
CONFIG_SENSORS_FAM15H_POWER=y
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
CONFIG_SENSORS_I5K_AMB=y
CONFIG_SENSORS_F71805F=y
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
CONFIG_SENSORS_FSCHMD=y
CONFIG_SENSORS_G760A=y
CONFIG_SENSORS_GL518SM=y
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_GPIO_FAN=y
CONFIG_SENSORS_CORETEMP=y
# CONFIG_SENSORS_IBMAEM is not set
# CONFIG_SENSORS_IBMPEX is not set
CONFIG_SENSORS_IT87=y
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_LINEAGE is not set
CONFIG_SENSORS_LM63=y
CONFIG_SENSORS_LM73=y
CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_LM77 is not set
CONFIG_SENSORS_LM78=y
# CONFIG_SENSORS_LM80 is not set
CONFIG_SENSORS_LM83=y
# CONFIG_SENSORS_LM85 is not set
CONFIG_SENSORS_LM87=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
CONFIG_SENSORS_LTC4151=y
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4261 is not set
CONFIG_SENSORS_LM95241=y
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_MAX16065 is not set
CONFIG_SENSORS_MAX1619=y
# CONFIG_SENSORS_MAX1668 is not set
CONFIG_SENSORS_MAX6639=y
CONFIG_SENSORS_MAX6642=y
CONFIG_SENSORS_MAX6650=y
CONFIG_SENSORS_NTC_THERMISTOR=y
CONFIG_SENSORS_PC87360=y
CONFIG_SENSORS_PC87427=y
CONFIG_SENSORS_PCF8591=y
CONFIG_PMBUS=y
# CONFIG_SENSORS_PMBUS is not set
CONFIG_SENSORS_ADM1275=y
# CONFIG_SENSORS_LM25066 is not set
CONFIG_SENSORS_LTC2978=y
# CONFIG_SENSORS_MAX16064 is not set
CONFIG_SENSORS_MAX34440=y
CONFIG_SENSORS_MAX8688=y
# CONFIG_SENSORS_UCD9000 is not set
# CONFIG_SENSORS_UCD9200 is not set
CONFIG_SENSORS_ZL6100=y
CONFIG_SENSORS_SHT15=y
# CONFIG_SENSORS_SHT21 is not set
CONFIG_SENSORS_SIS5595=y
CONFIG_SENSORS_SMM665=y
# CONFIG_SENSORS_DME1737 is not set
CONFIG_SENSORS_EMC1403=y
# CONFIG_SENSORS_EMC2103 is not set
CONFIG_SENSORS_EMC6W201=y
CONFIG_SENSORS_SMSC47M1=y
CONFIG_SENSORS_SMSC47M192=y
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_SCH5636 is not set
CONFIG_SENSORS_ADS1015=y
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
CONFIG_SENSORS_VIA_CPUTEMP=y
CONFIG_SENSORS_VIA686A=y
CONFIG_SENSORS_VT1211=y
CONFIG_SENSORS_VT8231=y
CONFIG_SENSORS_W83781D=y
CONFIG_SENSORS_W83791D=y
# CONFIG_SENSORS_W83792D is not set
CONFIG_SENSORS_W83793=y
CONFIG_SENSORS_W83795=y
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=y
# CONFIG_SENSORS_W83L786NG is not set
CONFIG_SENSORS_W83627HF=y
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_WM831X is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
# CONFIG_SSB_PCIHOST is not set
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
# CONFIG_SSB_DEBUG is not set
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
CONFIG_BCMA=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_DEBUG is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
CONFIG_HTC_I2CPLD=y
# CONFIG_TPS6105X is not set
CONFIG_TPS65010=y
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS6586X is not set
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
CONFIG_TWL4030_CORE=y
# CONFIG_TWL4030_MADC is not set
# CONFIG_MFD_TWL4030_AUDIO is not set
CONFIG_TWL6030_PWM=y
# CONFIG_TWL6040_CORE is not set
CONFIG_MFD_STMPE=y
CONFIG_MFD_TC3589X=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
CONFIG_PMIC_ADP5520=y
# CONFIG_MFD_MAX8925 is not set
CONFIG_MFD_MAX8997=y
# CONFIG_MFD_MAX8998 is not set
CONFIG_MFD_WM8400=y
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_CS5535 is not set
CONFIG_MFD_TIMBERDALE=y
CONFIG_LPC_SCH=y
CONFIG_MFD_RDC321X=y
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_WL1273_CORE is not set
CONFIG_MFD_AAT2870_CORE=y
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_DUMMY=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
# CONFIG_REGULATOR_GPIO is not set
CONFIG_REGULATOR_BQ24022=y
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_MAX8952 is not set
CONFIG_REGULATOR_MAX8997=y
# CONFIG_REGULATOR_TWL4030 is not set
CONFIG_REGULATOR_WM831X=y
CONFIG_REGULATOR_WM8400=y
CONFIG_REGULATOR_LP3971=y
# CONFIG_REGULATOR_LP3972 is not set
# CONFIG_REGULATOR_TPS65023 is not set
CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_TPS65912=y
# CONFIG_REGULATOR_ISL6271A is not set
CONFIG_REGULATOR_AD5398=y
CONFIG_REGULATOR_TPS65910=y
# CONFIG_REGULATOR_AAT2870 is not set
CONFIG_MEDIA_SUPPORT=y

#
# Multimedia core support
#
# CONFIG_MEDIA_CONTROLLER is not set
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2_COMMON=y
# CONFIG_DVB_CORE is not set
CONFIG_VIDEO_MEDIA=y

#
# Multimedia drivers
#
# CONFIG_RC_CORE is not set
CONFIG_MEDIA_TUNER=y
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_TEA5761=y
CONFIG_MEDIA_TUNER_TEA5767=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC5000=y
CONFIG_MEDIA_TUNER_XC4000=y
CONFIG_MEDIA_TUNER_MC44S803=y
CONFIG_VIDEO_V4L2=y
# CONFIG_VIDEO_CAPTURE_DRIVERS is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_RADIO_ADAPTERS is not set

#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_MGA is not set
CONFIG_DRM_VIA=y
# CONFIG_DRM_SAVAGE is not set
CONFIG_STUB_POULSBO=y
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_FB is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_SAHARA is not set
CONFIG_BACKLIGHT_WM831X=y
CONFIG_BACKLIGHT_ADP5520=y
CONFIG_BACKLIGHT_ADP8860=y
CONFIG_BACKLIGHT_ADP8870=y
CONFIG_BACKLIGHT_AAT2870=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
# CONFIG_SND_SEQUENCER_OSS is not set
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_VERBOSE=y
CONFIG_SND_PCM_XRUN_DEBUG=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=y
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
# CONFIG_SND_DRIVERS is not set
# CONFIG_SND_PCI is not set
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_USX2Y is not set
CONFIG_SND_USB_CAIAQ=y
# CONFIG_SND_USB_CAIAQ_INPUT is not set
# CONFIG_SND_USB_US122L is not set
CONFIG_SND_USB_6FIRE=y
# CONFIG_SND_FIREWIRE is not set
CONFIG_SND_SOC=y
CONFIG_SND_SOC_I2C_AND_SPI=y
# CONFIG_SND_SOC_ALL_CODECS is not set
CONFIG_SOUND_PRIME=y
CONFIG_SOUND_OSS=y
# CONFIG_SOUND_TRACEINIT is not set
# CONFIG_SOUND_DMAP is not set
# CONFIG_SOUND_VMIDI is not set
# CONFIG_SOUND_TRIX is not set
# CONFIG_SOUND_MSS is not set
# CONFIG_SOUND_MPU401 is not set
# CONFIG_SOUND_PAS is not set
# CONFIG_SOUND_PSS is not set
# CONFIG_SOUND_SB is not set
CONFIG_SOUND_YM3812=y
CONFIG_SOUND_UART6850=y
CONFIG_SOUND_AEDSP16=y
CONFIG_SC6600=y
# CONFIG_SC6600_JOY is not set
CONFIG_SC6600_CDROM=4
CONFIG_SC6600_CDROMBASE=0
# CONFIG_HID_SUPPORT is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_DWC3=y
# CONFIG_USB_DWC3_DEBUG is not set
# CONFIG_USB_MON is not set
CONFIG_USB_WUSB=y
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=y
# CONFIG_USB_XHCI_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_ISP1760_HCD=y
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_SL811_HCD=y
# CONFIG_USB_SL811_HCD_ISO is not set
CONFIG_USB_R8A66597_HCD=y
CONFIG_USB_RENESAS_USBHS_HCD=y
CONFIG_USB_WHCI_HCD=y
CONFIG_USB_HWA_HCD=y
CONFIG_USB_RENESAS_USBHS=y

#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
CONFIG_USB_TMC=y

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
CONFIG_USB_STORAGE_SDDR55=y
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
CONFIG_USB_STORAGE_KARMA=y
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_STORAGE_ENE_UB6250=y
CONFIG_USB_UAS=y
CONFIG_USB_LIBUSUAL=y

#
# USB Imaging devices
#
CONFIG_USB_MDC800=y
CONFIG_USB_MICROTEK=y

#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=y
CONFIG_USB_EMI26=y
CONFIG_USB_ADUTUX=y
CONFIG_USB_SEVSEG=y
CONFIG_USB_RIO500=y
# CONFIG_USB_LEGOTOWER is not set
CONFIG_USB_LCD=y
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=y
# CONFIG_USB_FTDI_ELAN is not set
CONFIG_USB_APPLEDISPLAY=y
CONFIG_USB_LD=y
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
CONFIG_USB_ISIGHTFW=y
# CONFIG_USB_YUREX is not set
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_DEBUG_FS=y
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
CONFIG_USB_FUSB300=y
# CONFIG_USB_R8A66597 is not set
# CONFIG_USB_GADGET_DWC3 is not set
# CONFIG_USB_M66592 is not set
# CONFIG_USB_AMD5536UDC is not set
# CONFIG_USB_CI13XXX_PCI is not set
# CONFIG_USB_NET2272 is not set
# CONFIG_USB_NET2280 is not set
# CONFIG_USB_GOKU is not set
# CONFIG_USB_LANGWELL is not set
# CONFIG_USB_EG20T is not set
# CONFIG_USB_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=y
# CONFIG_USB_ETH_RNDIS is not set
CONFIG_USB_ETH_EEM=y
# CONFIG_USB_G_NCM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FUNCTIONFS is not set
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_USB_G_ACM_MS is not set
# CONFIG_USB_G_MULTI is not set
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_DBGP is not set
# CONFIG_USB_G_WEBCAM is not set

#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
CONFIG_USB_GPIO_VBUS=y
CONFIG_TWL6030_USB=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_UWB=y
CONFIG_UWB_HWA=y
CONFIG_UWB_WHCI=y
# CONFIG_UWB_I1480U is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_UNSAFE_RESUME=y
# CONFIG_MMC_CLKGATE is not set

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=y
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PCI=y
CONFIG_MMC_RICOH_MMC=y
# CONFIG_MMC_SDHCI_PLTFM is not set
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_TIFM_SD is not set
CONFIG_MMC_CB710=y
CONFIG_MMC_VIA_SDMMC=y
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
CONFIG_MEMSTICK=y
CONFIG_MEMSTICK_DEBUG=y

#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
# CONFIG_MSPRO_BLOCK is not set

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=y
# CONFIG_MEMSTICK_JMICRON_38X is not set
CONFIG_MEMSTICK_R592=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
CONFIG_LEDS_LM3530=y
CONFIG_LEDS_PCA9532=y
# CONFIG_LEDS_PCA9532_GPIO is not set
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_LP3944=y
CONFIG_LEDS_LP5521=y
# CONFIG_LEDS_LP5523 is not set
CONFIG_LEDS_CLEVO_MAIL=y
# CONFIG_LEDS_PCA955X is not set
CONFIG_LEDS_WM831X_STATUS=y
CONFIG_LEDS_REGULATOR=y
CONFIG_LEDS_BD2802=y
CONFIG_LEDS_INTEL_SS4200=y
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_ADP5520 is not set
# CONFIG_LEDS_TRIGGERS is not set

#
# LED Triggers
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y
CONFIG_DMADEVICES_DEBUG=y
# CONFIG_DMADEVICES_VDEBUG is not set

#
# DMA Devices
#
# CONFIG_INTEL_MID_DMAC is not set
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_TIMB_DMA is not set
CONFIG_PCH_DMA=y
CONFIG_DMA_ENGINE=y

#
# DMA Clients
#
CONFIG_NET_DMA=y
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_RING=y

#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=y
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_VIRTIO_MMIO is not set
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_DELL_LAPTOP=y
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_IBM_RTL is not set
# CONFIG_SAMSUNG_Q10 is not set

#
# Hardware Spinlock drivers
#
CONFIG_CLKSRC_I8253=y
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_IOMMU_SUPPORT is not set
# CONFIG_VIRT_DRIVERS is not set
# CONFIG_PM_DEVFREQ is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DELL_RBU=y
CONFIG_DCDBAS=y
# CONFIG_DMIID is not set
CONFIG_DMI_SYSFS=y
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_SIGMA is not set
CONFIG_GOOGLE_FIRMWARE=y

#
# Google Firmware Drivers
#
# CONFIG_GOOGLE_MEMCONSOLE is not set

#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_EXT4_FS=y
# CONFIG_EXT4_USE_FOR_EXT23 is not set
CONFIG_EXT4_FS_XATTR=y
# CONFIG_EXT4_FS_POSIX_ACL is not set
# CONFIG_EXT4_FS_SECURITY is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=y
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
CONFIG_JFS_DEBUG=y
CONFIG_JFS_STATISTICS=y
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
CONFIG_BTRFS_FS=y
# CONFIG_BTRFS_FS_POSIX_ACL is not set
CONFIG_NILFS2_FS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_V4_1=y
CONFIG_PNFS_FILE_LAYOUT=y
CONFIG_PNFS_OBJLAYOUT=y
CONFIG_ROOT_NFS=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
# CONFIG_NFS_USE_NEW_IDMAPPER is not set
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_SUNRPC_BACKCHANNEL=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
CONFIG_CEPH_FS=y
# CONFIG_CIFS is not set
CONFIG_NCP_FS=y
# CONFIG_NCPFS_PACKET_SIGNING is not set
CONFIG_NCPFS_IOCTL_LOCKING=y
# CONFIG_NCPFS_STRONG is not set
# CONFIG_NCPFS_NFS_NS is not set
CONFIG_NCPFS_OS2_NS=y
# CONFIG_NCPFS_SMALLDOS is not set
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=y
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=y
CONFIG_9P_FS_POSIX_ACL=y

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
CONFIG_MINIX_SUBPARTITION=y
# CONFIG_SOLARIS_X86_PARTITION is not set
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
CONFIG_NLS_CODEPAGE_860=y
CONFIG_NLS_CODEPAGE_861=y
# CONFIG_NLS_CODEPAGE_862 is not set
CONFIG_NLS_CODEPAGE_863=y
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_8=y
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
CONFIG_NLS_ISO8859_13=y
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_UTF8=y

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=1
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
# CONFIG_DETECT_HUNG_TASK is not set
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE=400
CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
CONFIG_RT_MUTEX_TESTER=y
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
CONFIG_SPARSE_RCU_POINTER=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_LIST=y
CONFIG_TEST_LIST_SORT=y
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_DEBUG_CREDENTIALS=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_BACKTRACE_SELF_TEST=y
CONFIG_DEBUG_BLOCK_EXT_DEVT=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_LKDTM is not set
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
CONFIG_FAIL_PAGE_ALLOC=y
CONFIG_FAIL_MAKE_REQUEST=y
# CONFIG_FAIL_IO_TIMEOUT is not set
# CONFIG_FAIL_MMC_REQUEST is not set
CONFIG_FAULT_INJECTION_DEBUG_FS=y
# CONFIG_FAULT_INJECTION_STACKTRACE_FILTER is not set
CONFIG_LATENCYTOP=y
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_BUILD_DOCSRC is not set
# CONFIG_DYNAMIC_DEBUG is not set
CONFIG_DMA_API_DEBUG=y
CONFIG_ATOMIC64_SELFTEST=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_SERIAL_CONSOLE=y
# CONFIG_KGDB_TESTS is not set
CONFIG_KGDB_LOW_LEVEL_TRAP=y
# CONFIG_KGDB_KDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_TEST_KSTRTOX is not set
CONFIG_STRICT_DEVMEM=y
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_X86_PTDUMP=y
# CONFIG_DEBUG_RODATA is not set
CONFIG_DOUBLEFAULT=y
CONFIG_IOMMU_STRESS=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
CONFIG_IO_DELAY_0XED=y
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=1
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_TRUSTED_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
CONFIG_SECURITY_DMESG_RESTRICT=y
# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
CONFIG_CRYPTO_SEQIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_VMAC=y

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
CONFIG_CRYPTO_GHASH=y
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_RMD128=y
CONFIG_CRYPTO_RMD160=y
CONFIG_CRYPTO_RMD256=y
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA512 is not set
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_WP512=y

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
CONFIG_CRYPTO_AES_NI_INTEL=y
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_BLOWFISH_COMMON=y
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SALSA20=y
# CONFIG_CRYPTO_SALSA20_586 is not set
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_SERPENT_SSE2_586=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_586=y

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_ZLIB=y
CONFIG_CRYPTO_LZO=y

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_USER_API=y
# CONFIG_CRYPTO_USER_API_HASH is not set
CONFIG_CRYPTO_USER_API_SKCIPHER=y
# CONFIG_CRYPTO_HW is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
CONFIG_KVM_INTEL=y
# CONFIG_KVM_AMD is not set
# CONFIG_VHOST_NET is not set
CONFIG_LGUEST=y
# CONFIG_BINARY_PRINTF is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_NLATTR=y
CONFIG_AVERAGE=y
CONFIG_CORDIC=y
CONFIG_MPILIB=y
# CONFIG_MPILIB_EXTRA is not set
# CONFIG_DIGSIG is not set

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: linux-next: Tree for Nov 24 (fs/pnfs vs. exofs)
  2011-11-24 18:50 ` linux-next: Tree for Nov 24 (fs/pnfs vs. exofs) Randy Dunlap
@ 2011-11-29  0:09   ` Boaz Harrosh
       [not found]     ` <4ED422CC.60706-C4P08NqkoRlBDgjK7y7TUQ@public.gmane.org>
  0 siblings, 1 reply; 17+ messages in thread
From: Boaz Harrosh @ 2011-11-29  0:09 UTC (permalink / raw)
  To: Randy Dunlap
  Cc: Stephen Rothwell, linux-next, LKML, Benny Halevy, Michal Marek

On 11/24/2011 10:50 AM, Randy Dunlap wrote:
> On 11/23/2011 10:43 PM, Stephen Rothwell wrote:
>> Hi all,
>>
>> Changes since 20111123:
> 
> 
> When CONFIG_EXOFS is not enabled:
> 
> fs/built-in.o: In function `objio_alloc_io_state':
> objio_osd.c:(.text+0xcb525): undefined reference to `ore_get_rw_state'
> fs/built-in.o: In function `_write_done':
> objio_osd.c:(.text+0xcb58d): undefined reference to `ore_check_io'
> fs/built-in.o: In function `_read_done':
> objio_osd.c:(.text+0xcb5bf): undefined reference to `ore_check_io'
> fs/built-in.o: In function `objio_alloc_lseg':
> (.text+0xcb9a4): undefined reference to `ore_verify_layout'
> fs/built-in.o: In function `objio_free_result':
> (.text+0xcbb0e): undefined reference to `ore_put_io_state'
> fs/built-in.o: In function `objio_read_pagelist':
> (.text+0xcbc9b): undefined reference to `ore_read'
> fs/built-in.o: In function `objio_write_pagelist':
> (.text+0xcbd4e): undefined reference to `ore_write'
> 
> 
> Full randconfig file is attached.
> 

Thanks Randy. I completely missed that one.

The missing enablement is not CONFIG_EXOFS (that, I tested). It is the
CONFIG_MISC_FILESYSTEMS. Because CONFIG_MISC_FILESYSTEMS is not set then
exofs/Kconfig is not examined and it cannot do it's magic in selecting
everything.

I'm posting a patch as a separate mail reply.

What I did was revert to the old way of forcing all users of the ORE
to select everything that it requires. Instead of the elegant way it
was. The other choice is, of course, to move ore to the lib/ directory
but that one I fear even more. So here ...

Thanks
Boaz

^ permalink raw reply	[flat|nested] 17+ messages in thread

* ore: FIX breakage when MISC_FILESYSTEMS is not set
       [not found]     ` <4ED422CC.60706-C4P08NqkoRlBDgjK7y7TUQ@public.gmane.org>
@ 2011-11-29  0:13       ` Boaz Harrosh
  2011-11-29 12:21         ` Benny Halevy
  2011-11-29 23:35         ` [PATCH v3] " Boaz Harrosh
  0 siblings, 2 replies; 17+ messages in thread
From: Boaz Harrosh @ 2011-11-29  0:13 UTC (permalink / raw)
  To: Randy Dunlap, Trond Myklebust
  Cc: Stephen Rothwell, linux-next-u79uwXL29TY76Z2rM5mHXA, LKML,
	Benny Halevy, Michal Marek, NFS list, open-osd


As Reported by Randy Dunlap

When MISC_FILESYSTEMS is not enabled:

fs/built-in.o: In function `objio_alloc_io_state':
objio_osd.c:(.text+0xcb525): undefined reference to `ore_get_rw_state'
fs/built-in.o: In function `_write_done':
objio_osd.c:(.text+0xcb58d): undefined reference to `ore_check_io'
fs/built-in.o: In function `_read_done':
...

When MISC_FILESYSTEMS, which is more of a GUI thing then anything else,
is not selected. exofs/Kconfig is never examined during Kconfig,
and it can not do it's magic stuff to automatically select everything
needed.

The solution is to force all users of ORE (exofs, nfs) to manually
select everything auto-magically selected before.

(This is  why it is a bad idea to put libraries in random parts of
 the tree)

Reported-by: Randy Dunlap <rdunlap-/UHa2rfvQTnk1uMJSBkQmQ@public.gmane.org>
Signed-off-by: Boaz Harrosh <bharrosh-C4P08NqkoRlBDgjK7y7TUQ@public.gmane.org>
---
 fs/exofs/Kconfig |   17 +++++++++--------
 fs/nfs/Kconfig   |    2 ++
 2 files changed, 11 insertions(+), 8 deletions(-)

diff --git a/fs/exofs/Kconfig b/fs/exofs/Kconfig
index da42f32..6b05d99 100644
--- a/fs/exofs/Kconfig
+++ b/fs/exofs/Kconfig
@@ -1,17 +1,18 @@
-# Note ORE needs to "select ASYNC_XOR". So Not to force multiple selects
-# for every ORE user we do it like this. Any user should add itself here
-# at the "depends on EXOFS_FS || ..." with an ||. The dependencies are
-# selected here, and we default to "ON". So in effect it is like been
-# selected by any of the users.
+# ORE - Objects Raid Engine (libore.ko)
+# This library needs to be selected by it's users for example the below EXOFS
+# filesystem.
+# All users must do:
+#	depends on SCSI_OSD_ULD
+#	select ASYNC_XOR
+#	select ORE
 config ORE
 	tristate
-	depends on EXOFS_FS || PNFS_OBJLAYOUT
-	select ASYNC_XOR
-	default SCSI_OSD_ULD
 
 config EXOFS_FS
 	tristate "exofs: OSD based file system support"
 	depends on SCSI_OSD_ULD
+	select ASYNC_XOR
+	select ORE
 	help
 	  EXOFS is a file system that uses an OSD storage device,
 	  as its backing storage.
diff --git a/fs/nfs/Kconfig b/fs/nfs/Kconfig
index dbcd821..3708d76 100644
--- a/fs/nfs/Kconfig
+++ b/fs/nfs/Kconfig
@@ -96,6 +96,8 @@ config PNFS_BLOCK
 config PNFS_OBJLAYOUT
 	tristate
 	depends on NFS_FS && NFS_V4_1 && SCSI_OSD_ULD
+	select ASYNC_XOR
+	select ORE
 	default m
 
 config ROOT_NFS
-- 
1.7.6.4


--
To unsubscribe from this list: send the line "unsubscribe linux-nfs" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply related	[flat|nested] 17+ messages in thread

* Re: ore: FIX breakage when MISC_FILESYSTEMS is not set
  2011-11-29  0:13       ` ore: FIX breakage when MISC_FILESYSTEMS is not set Boaz Harrosh
@ 2011-11-29 12:21         ` Benny Halevy
  2011-11-29 17:33           ` Trond Myklebust
  2011-11-29 23:35         ` [PATCH v3] " Boaz Harrosh
  1 sibling, 1 reply; 17+ messages in thread
From: Benny Halevy @ 2011-11-29 12:21 UTC (permalink / raw)
  To: Boaz Harrosh
  Cc: Randy Dunlap, Trond Myklebust, Stephen Rothwell, linux-next,
	LKML, Michal Marek, NFS list, open-osd

On 2011-11-29 02:13, Boaz Harrosh wrote:
> 
> As Reported by Randy Dunlap
> 
> When MISC_FILESYSTEMS is not enabled:
> 
> fs/built-in.o: In function `objio_alloc_io_state':
> objio_osd.c:(.text+0xcb525): undefined reference to `ore_get_rw_state'
> fs/built-in.o: In function `_write_done':
> objio_osd.c:(.text+0xcb58d): undefined reference to `ore_check_io'
> fs/built-in.o: In function `_read_done':
> ...
> 
> When MISC_FILESYSTEMS, which is more of a GUI thing then anything else,
> is not selected. exofs/Kconfig is never examined during Kconfig,
> and it can not do it's magic stuff to automatically select everything

nit: s/it's/its/

> needed.
> 
> The solution is to force all users of ORE (exofs, nfs) to manually
> select everything auto-magically selected before.

How about using "depend ORE" rather than "select ORE"?

> 
> (This is  why it is a bad idea to put libraries in random parts of
>  the tree)
> 
> Reported-by: Randy Dunlap <rdunlap@xenotime.net>
> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
> ---
>  fs/exofs/Kconfig |   17 +++++++++--------
>  fs/nfs/Kconfig   |    2 ++
>  2 files changed, 11 insertions(+), 8 deletions(-)
> 
> diff --git a/fs/exofs/Kconfig b/fs/exofs/Kconfig
> index da42f32..6b05d99 100644
> --- a/fs/exofs/Kconfig
> +++ b/fs/exofs/Kconfig
> @@ -1,17 +1,18 @@
> -# Note ORE needs to "select ASYNC_XOR". So Not to force multiple selects
> -# for every ORE user we do it like this. Any user should add itself here
> -# at the "depends on EXOFS_FS || ..." with an ||. The dependencies are
> -# selected here, and we default to "ON". So in effect it is like been
> -# selected by any of the users.
> +# ORE - Objects Raid Engine (libore.ko)
> +# This library needs to be selected by it's users for example the below EXOFS
> +# filesystem.

nit:
This library needs to be selected by its users. For example, see
EXOFS_FS below.

Benny

> +# All users must do:
> +#	depends on SCSI_OSD_ULD
> +#	select ASYNC_XOR
> +#	select ORE
>  config ORE
>  	tristate
> -	depends on EXOFS_FS || PNFS_OBJLAYOUT
> -	select ASYNC_XOR
> -	default SCSI_OSD_ULD
>  
>  config EXOFS_FS
>  	tristate "exofs: OSD based file system support"
>  	depends on SCSI_OSD_ULD
> +	select ASYNC_XOR
> +	select ORE
>  	help
>  	  EXOFS is a file system that uses an OSD storage device,
>  	  as its backing storage.
> diff --git a/fs/nfs/Kconfig b/fs/nfs/Kconfig
> index dbcd821..3708d76 100644
> --- a/fs/nfs/Kconfig
> +++ b/fs/nfs/Kconfig
> @@ -96,6 +96,8 @@ config PNFS_BLOCK
>  config PNFS_OBJLAYOUT
>  	tristate
>  	depends on NFS_FS && NFS_V4_1 && SCSI_OSD_ULD
> +	select ASYNC_XOR
> +	select ORE
>  	default m
>  
>  config ROOT_NFS

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: ore: FIX breakage when MISC_FILESYSTEMS is not set
  2011-11-29 12:21         ` Benny Halevy
@ 2011-11-29 17:33           ` Trond Myklebust
       [not found]             ` <1322588023.4174.28.camel-SyLVLa/KEI9HwK5hSS5vWB2eb7JE58TQ@public.gmane.org>
  0 siblings, 1 reply; 17+ messages in thread
From: Trond Myklebust @ 2011-11-29 17:33 UTC (permalink / raw)
  To: Benny Halevy
  Cc: Boaz Harrosh, Randy Dunlap, Stephen Rothwell, linux-next, LKML,
	Michal Marek, NFS list, open-osd

On Tue, 2011-11-29 at 14:21 +0200, Benny Halevy wrote: 
> On 2011-11-29 02:13, Boaz Harrosh wrote:
> > 
> > As Reported by Randy Dunlap
> > 
> > When MISC_FILESYSTEMS is not enabled:
> > 
> > fs/built-in.o: In function `objio_alloc_io_state':
> > objio_osd.c:(.text+0xcb525): undefined reference to `ore_get_rw_state'
> > fs/built-in.o: In function `_write_done':
> > objio_osd.c:(.text+0xcb58d): undefined reference to `ore_check_io'
> > fs/built-in.o: In function `_read_done':
> > ...
> > 
> > When MISC_FILESYSTEMS, which is more of a GUI thing then anything else,
> > is not selected. exofs/Kconfig is never examined during Kconfig,
> > and it can not do it's magic stuff to automatically select everything
> 
> nit: s/it's/its/
> 
> > needed.
> > 
> > The solution is to force all users of ORE (exofs, nfs) to manually
> > select everything auto-magically selected before.
> 
> How about using "depend ORE" rather than "select ORE"?

Right. Make PNFS_OBJLAYOUT and EXOFS_FS depend on ASYNC_XOR (or select
it) and then make ORE depend on EXOFS_FS || PNFS_OBJLAYOUT.

There should be no need to add the 'select ORE'...

> > (This is  why it is a bad idea to put libraries in random parts of
> >  the tree)
> > 
> > Reported-by: Randy Dunlap <rdunlap@xenotime.net>
> > Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
> > ---
> >  fs/exofs/Kconfig |   17 +++++++++--------
> >  fs/nfs/Kconfig   |    2 ++
> >  2 files changed, 11 insertions(+), 8 deletions(-)
> > 
> > diff --git a/fs/exofs/Kconfig b/fs/exofs/Kconfig
> > index da42f32..6b05d99 100644
> > --- a/fs/exofs/Kconfig
> > +++ b/fs/exofs/Kconfig
> > @@ -1,17 +1,18 @@
> > -# Note ORE needs to "select ASYNC_XOR". So Not to force multiple selects
> > -# for every ORE user we do it like this. Any user should add itself here
> > -# at the "depends on EXOFS_FS || ..." with an ||. The dependencies are
> > -# selected here, and we default to "ON". So in effect it is like been
> > -# selected by any of the users.
> > +# ORE - Objects Raid Engine (libore.ko)
> > +# This library needs to be selected by it's users for example the below EXOFS
> > +# filesystem.
> 
> nit:
> This library needs to be selected by its users. For example, see
> EXOFS_FS below.
> 
> Benny
> 
> > +# All users must do:
> > +#	depends on SCSI_OSD_ULD
> > +#	select ASYNC_XOR
> > +#	select ORE
> >  config ORE
> >  	tristate

	depends on EXOFS_FS || PNFS_OBJLAYOUT
	default y


> >  
> >  config EXOFS_FS
> >  	tristate "exofs: OSD based file system support"

	depends on SCSI_OSD_ULD && ASYNC_XOR

> >  	help
> >  	  EXOFS is a file system that uses an OSD storage device,
> >  	  as its backing storage.
> > diff --git a/fs/nfs/Kconfig b/fs/nfs/Kconfig
> > index dbcd821..3708d76 100644
> > --- a/fs/nfs/Kconfig
> > +++ b/fs/nfs/Kconfig
> > @@ -96,6 +96,8 @@ config PNFS_BLOCK
> >  config PNFS_OBJLAYOUT
> >  	tristate
> >  	depends on NFS_FS && NFS_V4_1 && SCSI_OSD_ULD

	depends on NFS_V4_1 && ASYNC_XOR && SCSI_OSD_ULD

> >  	default m
> >  
> >  config ROOT_NFS

-- 
Trond Myklebust
Linux NFS client maintainer

NetApp
Trond.Myklebust@netapp.com
www.netapp.com

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: ore: FIX breakage when MISC_FILESYSTEMS is not set
       [not found]             ` <1322588023.4174.28.camel-SyLVLa/KEI9HwK5hSS5vWB2eb7JE58TQ@public.gmane.org>
@ 2011-11-29 22:22               ` Boaz Harrosh
       [not found]                 ` <4ED55B3B.9050207-C4P08NqkoRlBDgjK7y7TUQ@public.gmane.org>
  2011-11-29 23:39                 ` Randy Dunlap
  0 siblings, 2 replies; 17+ messages in thread
From: Boaz Harrosh @ 2011-11-29 22:22 UTC (permalink / raw)
  To: Trond Myklebust
  Cc: Benny Halevy, Randy Dunlap, Stephen Rothwell,
	linux-next-u79uwXL29TY76Z2rM5mHXA, LKML, Michal Marek, NFS list,
	open-osd

On 11/29/2011 09:33 AM, Trond Myklebust wrote:
> On Tue, 2011-11-29 at 14:21 +0200, Benny Halevy wrote: 
>> On 2011-11-29 02:13, Boaz Harrosh wrote:

>>>
>>> The solution is to force all users of ORE (exofs, nfs) to manually
>>> select everything auto-magically selected before.
>>
>> How about using "depend ORE" rather than "select ORE"?
> 
> Right. Make PNFS_OBJLAYOUT and EXOFS_FS depend on ASYNC_XOR (or select
> it) and then make ORE depend on EXOFS_FS || PNFS_OBJLAYOUT.
> 
> There should be no need to add the 'select ORE'...
> 

No! guys!

One it will not solve my problem because any
solution that needs to inspect exofs/Kconfig file will
not work if MISC_FILESYSTEMS is not selected and your
solutions involve that.

And two:
All the user needs to do is Select NFS4.1 everything
else should be done automatically. He should not need
to go to misc-filesystems and select ORE so he can have
pnfs-objects. That's a nightmare.

And anyway the current Kernel rule is that a user of a library
needs to select it and all it's dependencies, because select
is not recursive. Now I devised a little skim that can avoid
that, which is not conventional but works very nice. It was
almost good enough only we have the problem that exofs is under
that big MISC_FILESYSTEMS nub.

So It's the regular Kernel way, for now.

(The real solution is to move ORE to lib/ which would enable my
 clever trick. But I don't want to go there only because of that)

I'll fix the typos though

Thanks
Heart
--
To unsubscribe from this list: send the line "unsubscribe linux-nfs" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: ore: FIX breakage when MISC_FILESYSTEMS is not set
       [not found]                 ` <4ED55B3B.9050207-C4P08NqkoRlBDgjK7y7TUQ@public.gmane.org>
@ 2011-11-29 22:36                   ` Trond Myklebust
  2011-11-29 22:38                     ` Trond Myklebust
  0 siblings, 1 reply; 17+ messages in thread
From: Trond Myklebust @ 2011-11-29 22:36 UTC (permalink / raw)
  To: Boaz Harrosh
  Cc: Benny Halevy, Randy Dunlap, Stephen Rothwell,
	linux-next-u79uwXL29TY76Z2rM5mHXA, LKML, Michal Marek, NFS list,
	open-osd

On Tue, 2011-11-29 at 14:22 -0800, Boaz Harrosh wrote: 
> On 11/29/2011 09:33 AM, Trond Myklebust wrote:
> > On Tue, 2011-11-29 at 14:21 +0200, Benny Halevy wrote: 
> >> On 2011-11-29 02:13, Boaz Harrosh wrote:
> 
> >>>
> >>> The solution is to force all users of ORE (exofs, nfs) to manually
> >>> select everything auto-magically selected before.
> >>
> >> How about using "depend ORE" rather than "select ORE"?
> > 
> > Right. Make PNFS_OBJLAYOUT and EXOFS_FS depend on ASYNC_XOR (or select
> > it) and then make ORE depend on EXOFS_FS || PNFS_OBJLAYOUT.
> > 
> > There should be no need to add the 'select ORE'...
> > 
> 
> No! guys!
> 
> One it will not solve my problem because any
> solution that needs to inspect exofs/Kconfig file will
> not work if MISC_FILESYSTEMS is not selected and your
> solutions involve that.

Then move ORE _out_ of MISC_FILESYSTEMS. There is no reason why it needs
to be there as long as the things it depends on are there.

> And two:
> All the user needs to do is Select NFS4.1 everything
> else should be done automatically. He should not need
> to go to misc-filesystems and select ORE so he can have
> pnfs-objects. That's a nightmare.

The solution I proposed didn't involve having the user select anything
other than NFSv4.1 and possibly ASYNC_XOR.

> And anyway the current Kernel rule is that a user of a library
> needs to select it and all it's dependencies, because select
> is not recursive. Now I devised a little skim that can avoid

...and this is _my_ nightmare. I dont' _want_ these selects anywhere in
the NFS subsystem.

-- 
Trond Myklebust
Linux NFS client maintainer

NetApp
Trond.Myklebust-HgOvQuBEEgTQT0dZR+AlfA@public.gmane.org
www.netapp.com

--
To unsubscribe from this list: send the line "unsubscribe linux-nfs" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: ore: FIX breakage when MISC_FILESYSTEMS is not set
  2011-11-29 22:36                   ` Trond Myklebust
@ 2011-11-29 22:38                     ` Trond Myklebust
  2011-11-29 23:33                       ` Boaz Harrosh
  0 siblings, 1 reply; 17+ messages in thread
From: Trond Myklebust @ 2011-11-29 22:38 UTC (permalink / raw)
  To: Boaz Harrosh
  Cc: Benny Halevy, Randy Dunlap, Stephen Rothwell, linux-next, LKML,
	Michal Marek, NFS list, open-osd

On Tue, 2011-11-29 at 17:36 -0500, Trond Myklebust wrote: 
> On Tue, 2011-11-29 at 14:22 -0800, Boaz Harrosh wrote: 
> > On 11/29/2011 09:33 AM, Trond Myklebust wrote:
> > > On Tue, 2011-11-29 at 14:21 +0200, Benny Halevy wrote: 
> > >> On 2011-11-29 02:13, Boaz Harrosh wrote:
> > 
> > >>>
> > >>> The solution is to force all users of ORE (exofs, nfs) to manually
> > >>> select everything auto-magically selected before.
> > >>
> > >> How about using "depend ORE" rather than "select ORE"?
> > > 
> > > Right. Make PNFS_OBJLAYOUT and EXOFS_FS depend on ASYNC_XOR (or select
> > > it) and then make ORE depend on EXOFS_FS || PNFS_OBJLAYOUT.
> > > 
> > > There should be no need to add the 'select ORE'...
> > > 
> > 
> > No! guys!
> > 
> > One it will not solve my problem because any
> > solution that needs to inspect exofs/Kconfig file will
> > not work if MISC_FILESYSTEMS is not selected and your
> > solutions involve that.
> 
> Then move ORE _out_ of MISC_FILESYSTEMS. There is no reason why it needs
> to be there as long as the things it depends on are there.

Should read:
There is no reason why ORE needs to depend on MISC_FILESYSTEMS. Only
EXOFS_FS needs that...


> > And two:
> > All the user needs to do is Select NFS4.1 everything
> > else should be done automatically. He should not need
> > to go to misc-filesystems and select ORE so he can have
> > pnfs-objects. That's a nightmare.
> 
> The solution I proposed didn't involve having the user select anything
> other than NFSv4.1 and possibly ASYNC_XOR.
> 
> > And anyway the current Kernel rule is that a user of a library
> > needs to select it and all it's dependencies, because select
> > is not recursive. Now I devised a little skim that can avoid
> 
> ...and this is _my_ nightmare. I dont' _want_ these selects anywhere in
> the NFS subsystem.

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: ore: FIX breakage when MISC_FILESYSTEMS is not set
  2011-11-29 23:39                 ` Randy Dunlap
@ 2011-11-29 23:30                   ` Boaz Harrosh
  0 siblings, 0 replies; 17+ messages in thread
From: Boaz Harrosh @ 2011-11-29 23:30 UTC (permalink / raw)
  To: Randy Dunlap
  Cc: Trond Myklebust, Benny Halevy, Stephen Rothwell, linux-next,
	LKML, Michal Marek, NFS list, open-osd

On 11/29/2011 03:39 PM, Randy Dunlap wrote:
> On 11/29/2011 02:22 PM, Boaz Harrosh wrote:
>> On 11/29/2011 09:33 AM, Trond Myklebust wrote:
>>> On Tue, 2011-11-29 at 14:21 +0200, Benny Halevy wrote: 
>>>> On 2011-11-29 02:13, Boaz Harrosh wrote:
>>
>>>>>
>>>>> The solution is to force all users of ORE (exofs, nfs) to manually
>>>>> select everything auto-magically selected before.
>>>>
>>>> How about using "depend ORE" rather than "select ORE"?
>>>
>>> Right. Make PNFS_OBJLAYOUT and EXOFS_FS depend on ASYNC_XOR (or select
>>> it) and then make ORE depend on EXOFS_FS || PNFS_OBJLAYOUT.
>>>
>>> There should be no need to add the 'select ORE'...
>>>
>>
>> No! guys!
>>
>> One it will not solve my problem because any
>> solution that needs to inspect exofs/Kconfig file will
>> not work if MISC_FILESYSTEMS is not selected and your
>> solutions involve that.
>>
>> And two:
>> All the user needs to do is Select NFS4.1 everything
>> else should be done automatically. He should not need
>> to go to misc-filesystems and select ORE so he can have
>> pnfs-objects. That's a nightmare.
>>
>> And anyway the current Kernel rule is that a user of a library
>> needs to select it and all it's dependencies, because select
>> is not recursive. Now I devised a little skim that can avoid
> 
> Since 'select' is not recursive, how does the "select ASYNC_XOR"
> handle ensuring that what it selects (ASYNC_CORE and XOR_BLOCKS)
> have been enabled?
> 

Not sure why it works than. I looked at config MD_RAID456
and from it's selects I only need ASYNC_XOR.
In later Kernels I will also need the RAID6_** stuff.

>> that, which is not conventional but works very nice. It was
>> almost good enough only we have the problem that exofs is under
>> that big MISC_FILESYSTEMS nub.
>>
>> So It's the regular Kernel way, for now.
>>
>> (The real solution is to move ORE to lib/ which would enable my
>>  clever trick. But I don't want to go there only because of that)
>>
>> I'll fix the typos though
> 
> With the patch applied, I am still seeing this kconfig warning:
> 
> warning: (PNFS_OBJLAYOUT) selects ORE which has unmet direct dependencies (MISC_FILESYSTEMS)
> 

OK So I guess I need a much deeper change and move ORE to lib/ or I can do the
below change.

Please advise what you think is the best for now?

Thanks Randy for yur help
---
From: Boaz Harrosh <bharrosh@panasas.com>
Subject: [PATCH] ore: FIX breakage when MISC_FILESYSTEMS is not set

As Reported by Randy Dunlap

When MISC_FILESYSTEMS is not enabled:

fs/built-in.o: In function `objio_alloc_io_state':
objio_osd.c:(.text+0xcb525): undefined reference to `ore_get_rw_state'
fs/built-in.o: In function `_write_done':
objio_osd.c:(.text+0xcb58d): undefined reference to `ore_check_io'
fs/built-in.o: In function `_read_done':
...

When MISC_FILESYSTEMS, which is more of a GUI thing then anything else,
is not selected. exofs/Kconfig is never examined during Kconfig,
and it can not do it's magic stuff to automatically select everything
needed.

We must split exofs/Kconfig in two the ore one is
always included and the exofs one is left in it's
old place in the menu.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
---
 fs/Kconfig           |    2 ++
 fs/exofs/Kconfig     |   11 -----------
 fs/exofs/ore.Kconfig |   12 ++++++++++++
 3 files changed, 14 insertions(+), 11 deletions(-)
 create mode 100644 fs/exofs/ore.Kconfig

diff --git a/fs/Kconfig b/fs/Kconfig
index 5f4c45d..fd7bfef 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -218,6 +218,8 @@ source "fs/exofs/Kconfig"
 
 endif # MISC_FILESYSTEMS
 
+source "fs/exofs/ore.Kconfig"
+
 menuconfig NETWORK_FILESYSTEMS
 	bool "Network File Systems"
 	default y
diff --git a/fs/exofs/Kconfig b/fs/exofs/Kconfig
index da42f32..86194b2 100644
--- a/fs/exofs/Kconfig
+++ b/fs/exofs/Kconfig
@@ -1,14 +1,3 @@
-# Note ORE needs to "select ASYNC_XOR". So Not to force multiple selects
-# for every ORE user we do it like this. Any user should add itself here
-# at the "depends on EXOFS_FS || ..." with an ||. The dependencies are
-# selected here, and we default to "ON". So in effect it is like been
-# selected by any of the users.
-config ORE
-	tristate
-	depends on EXOFS_FS || PNFS_OBJLAYOUT
-	select ASYNC_XOR
-	default SCSI_OSD_ULD
-
 config EXOFS_FS
 	tristate "exofs: OSD based file system support"
 	depends on SCSI_OSD_ULD
diff --git a/fs/exofs/ore.Kconfig b/fs/exofs/ore.Kconfig
new file mode 100644
index 0000000..1ca7fb7
--- /dev/null
+++ b/fs/exofs/ore.Kconfig
@@ -0,0 +1,12 @@
+# ORE - Objects Raid Engine (libore.ko)
+#
+# Note ORE needs to "select ASYNC_XOR". So Not to force multiple selects
+# for every ORE user we do it like this. Any user should add itself here
+# at the "depends on EXOFS_FS || ..." with an ||. The dependencies are
+# selected here, and we default to "ON". So in effect it is like been
+# selected by any of the users.
+config ORE
+	tristate
+	depends on EXOFS_FS || PNFS_OBJLAYOUT
+	select ASYNC_XOR
+	default SCSI_OSD_ULD
-- 
1.7.6.4

^ permalink raw reply related	[flat|nested] 17+ messages in thread

* Re: ore: FIX breakage when MISC_FILESYSTEMS is not set
  2011-11-29 22:38                     ` Trond Myklebust
@ 2011-11-29 23:33                       ` Boaz Harrosh
  0 siblings, 0 replies; 17+ messages in thread
From: Boaz Harrosh @ 2011-11-29 23:33 UTC (permalink / raw)
  To: Trond Myklebust
  Cc: Benny Halevy, Randy Dunlap, Stephen Rothwell, linux-next, LKML,
	Michal Marek, NFS list, open-osd

On 11/29/2011 02:38 PM, Trond Myklebust wrote:
> Should read:
> There is no reason why ORE needs to depend on MISC_FILESYSTEMS. Only
> EXOFS_FS needs that...
> 
> 

OK, thanks

I sent a patch that does that (As reply to Randy).

I'll re-send it as it's own real thing

Thanks
Heart

^ permalink raw reply	[flat|nested] 17+ messages in thread

* [PATCH v3] ore: FIX breakage when MISC_FILESYSTEMS is not set
  2011-11-29  0:13       ` ore: FIX breakage when MISC_FILESYSTEMS is not set Boaz Harrosh
  2011-11-29 12:21         ` Benny Halevy
@ 2011-11-29 23:35         ` Boaz Harrosh
  2011-11-30  1:00           ` [osd-dev] " Boaz Harrosh
  2011-11-30  8:31           ` Michal Marek
  1 sibling, 2 replies; 17+ messages in thread
From: Boaz Harrosh @ 2011-11-29 23:35 UTC (permalink / raw)
  To: Randy Dunlap, Trond Myklebust
  Cc: Michal Marek, Stephen Rothwell, NFS list, LKML, Benny Halevy,
	linux-next, open-osd


As Reported by Randy Dunlap

When MISC_FILESYSTEMS is not enabled:

fs/built-in.o: In function `objio_alloc_io_state':
objio_osd.c:(.text+0xcb525): undefined reference to `ore_get_rw_state'
fs/built-in.o: In function `_write_done':
objio_osd.c:(.text+0xcb58d): undefined reference to `ore_check_io'
fs/built-in.o: In function `_read_done':
...

When MISC_FILESYSTEMS, which is more of a GUI thing then anything else,
is not selected. exofs/Kconfig is never examined during Kconfig,
and it can not do it's magic stuff to automatically select everything
needed.

We must split exofs/Kconfig in two. The ore one is always included.
And the exofs one is left in it's old place in the menu.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
---
 fs/Kconfig           |    2 ++
 fs/exofs/Kconfig     |   11 -----------
 fs/exofs/ore.Kconfig |   12 ++++++++++++
 3 files changed, 14 insertions(+), 11 deletions(-)
 create mode 100644 fs/exofs/ore.Kconfig

diff --git a/fs/Kconfig b/fs/Kconfig
index 5f4c45d..fd7bfef 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -218,6 +218,8 @@ source "fs/exofs/Kconfig"
 
 endif # MISC_FILESYSTEMS
 
+source "fs/exofs/ore.Kconfig"
+
 menuconfig NETWORK_FILESYSTEMS
 	bool "Network File Systems"
 	default y
diff --git a/fs/exofs/Kconfig b/fs/exofs/Kconfig
index da42f32..86194b2 100644
--- a/fs/exofs/Kconfig
+++ b/fs/exofs/Kconfig
@@ -1,14 +1,3 @@
-# Note ORE needs to "select ASYNC_XOR". So Not to force multiple selects
-# for every ORE user we do it like this. Any user should add itself here
-# at the "depends on EXOFS_FS || ..." with an ||. The dependencies are
-# selected here, and we default to "ON". So in effect it is like been
-# selected by any of the users.
-config ORE
-	tristate
-	depends on EXOFS_FS || PNFS_OBJLAYOUT
-	select ASYNC_XOR
-	default SCSI_OSD_ULD
-
 config EXOFS_FS
 	tristate "exofs: OSD based file system support"
 	depends on SCSI_OSD_ULD
diff --git a/fs/exofs/ore.Kconfig b/fs/exofs/ore.Kconfig
new file mode 100644
index 0000000..1ca7fb7
--- /dev/null
+++ b/fs/exofs/ore.Kconfig
@@ -0,0 +1,12 @@
+# ORE - Objects Raid Engine (libore.ko)
+#
+# Note ORE needs to "select ASYNC_XOR". So Not to force multiple selects
+# for every ORE user we do it like this. Any user should add itself here
+# at the "depends on EXOFS_FS || ..." with an ||. The dependencies are
+# selected here, and we default to "ON". So in effect it is like been
+# selected by any of the users.
+config ORE
+	tristate
+	depends on EXOFS_FS || PNFS_OBJLAYOUT
+	select ASYNC_XOR
+	default SCSI_OSD_ULD
-- 
1.7.6.4

^ permalink raw reply related	[flat|nested] 17+ messages in thread

* Re: ore: FIX breakage when MISC_FILESYSTEMS is not set
  2011-11-29 22:22               ` Boaz Harrosh
       [not found]                 ` <4ED55B3B.9050207-C4P08NqkoRlBDgjK7y7TUQ@public.gmane.org>
@ 2011-11-29 23:39                 ` Randy Dunlap
  2011-11-29 23:30                   ` Boaz Harrosh
  1 sibling, 1 reply; 17+ messages in thread
From: Randy Dunlap @ 2011-11-29 23:39 UTC (permalink / raw)
  To: Boaz Harrosh
  Cc: Trond Myklebust, Benny Halevy, Stephen Rothwell, linux-next,
	LKML, Michal Marek, NFS list, open-osd

On 11/29/2011 02:22 PM, Boaz Harrosh wrote:
> On 11/29/2011 09:33 AM, Trond Myklebust wrote:
>> On Tue, 2011-11-29 at 14:21 +0200, Benny Halevy wrote: 
>>> On 2011-11-29 02:13, Boaz Harrosh wrote:
> 
>>>>
>>>> The solution is to force all users of ORE (exofs, nfs) to manually
>>>> select everything auto-magically selected before.
>>>
>>> How about using "depend ORE" rather than "select ORE"?
>>
>> Right. Make PNFS_OBJLAYOUT and EXOFS_FS depend on ASYNC_XOR (or select
>> it) and then make ORE depend on EXOFS_FS || PNFS_OBJLAYOUT.
>>
>> There should be no need to add the 'select ORE'...
>>
> 
> No! guys!
> 
> One it will not solve my problem because any
> solution that needs to inspect exofs/Kconfig file will
> not work if MISC_FILESYSTEMS is not selected and your
> solutions involve that.
> 
> And two:
> All the user needs to do is Select NFS4.1 everything
> else should be done automatically. He should not need
> to go to misc-filesystems and select ORE so he can have
> pnfs-objects. That's a nightmare.
> 
> And anyway the current Kernel rule is that a user of a library
> needs to select it and all it's dependencies, because select
> is not recursive. Now I devised a little skim that can avoid

Since 'select' is not recursive, how does the "select ASYNC_XOR"
handle ensuring that what it selects (ASYNC_CORE and XOR_BLOCKS)
have been enabled?

> that, which is not conventional but works very nice. It was
> almost good enough only we have the problem that exofs is under
> that big MISC_FILESYSTEMS nub.
> 
> So It's the regular Kernel way, for now.
> 
> (The real solution is to move ORE to lib/ which would enable my
>  clever trick. But I don't want to go there only because of that)
> 
> I'll fix the typos though

With the patch applied, I am still seeing this kconfig warning:

warning: (PNFS_OBJLAYOUT) selects ORE which has unmet direct dependencies (MISC_FILESYSTEMS)


-- 
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [osd-dev] [PATCH v3] ore: FIX breakage when MISC_FILESYSTEMS is not set
  2011-11-29 23:35         ` [PATCH v3] " Boaz Harrosh
@ 2011-11-30  1:00           ` Boaz Harrosh
  2011-11-30 18:00             ` Randy Dunlap
  2011-11-30  8:31           ` Michal Marek
  1 sibling, 1 reply; 17+ messages in thread
From: Boaz Harrosh @ 2011-11-30  1:00 UTC (permalink / raw)
  To: Randy Dunlap, Trond Myklebust
  Cc: Michal Marek, Stephen Rothwell, NFS list, LKML, Benny Halevy,
	linux-next, open-osd

On 11/29/2011 03:35 PM, Boaz Harrosh wrote:
> 
> As Reported by Randy Dunlap
> 

Randy Hi

I think I prefer this simple solution for now, instead of
the complete move of the ore to lib/

It solves the warning problem you reported and let us
keep the convenience of selecting everything in one place. As
was said there are more dependencies on the way.

I will look into the additional ASYNC_CORE and XOR_BLOCKS selects
you mentioned. For some reason it works but I'll try to find a
way to break it or prove It is sound.

Please advise?

Thanks
Heart

> When MISC_FILESYSTEMS is not enabled:
> 
> fs/built-in.o: In function `objio_alloc_io_state':
> objio_osd.c:(.text+0xcb525): undefined reference to `ore_get_rw_state'
> fs/built-in.o: In function `_write_done':
> objio_osd.c:(.text+0xcb58d): undefined reference to `ore_check_io'
> fs/built-in.o: In function `_read_done':
> ...
> 
> When MISC_FILESYSTEMS, which is more of a GUI thing then anything else,
> is not selected. exofs/Kconfig is never examined during Kconfig,
> and it can not do it's magic stuff to automatically select everything
> needed.
> 
> We must split exofs/Kconfig in two. The ore one is always included.
> And the exofs one is left in it's old place in the menu.
> 
> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
> ---
>  fs/Kconfig           |    2 ++
>  fs/exofs/Kconfig     |   11 -----------
>  fs/exofs/ore.Kconfig |   12 ++++++++++++
>  3 files changed, 14 insertions(+), 11 deletions(-)
>  create mode 100644 fs/exofs/ore.Kconfig
> 
> diff --git a/fs/Kconfig b/fs/Kconfig
> index 5f4c45d..fd7bfef 100644
> --- a/fs/Kconfig
> +++ b/fs/Kconfig
> @@ -218,6 +218,8 @@ source "fs/exofs/Kconfig"
>  
>  endif # MISC_FILESYSTEMS
>  
> +source "fs/exofs/ore.Kconfig"
> +
>  menuconfig NETWORK_FILESYSTEMS
>  	bool "Network File Systems"
>  	default y
> diff --git a/fs/exofs/Kconfig b/fs/exofs/Kconfig
> index da42f32..86194b2 100644
> --- a/fs/exofs/Kconfig
> +++ b/fs/exofs/Kconfig
> @@ -1,14 +1,3 @@
> -# Note ORE needs to "select ASYNC_XOR". So Not to force multiple selects
> -# for every ORE user we do it like this. Any user should add itself here
> -# at the "depends on EXOFS_FS || ..." with an ||. The dependencies are
> -# selected here, and we default to "ON". So in effect it is like been
> -# selected by any of the users.
> -config ORE
> -	tristate
> -	depends on EXOFS_FS || PNFS_OBJLAYOUT
> -	select ASYNC_XOR
> -	default SCSI_OSD_ULD
> -
>  config EXOFS_FS
>  	tristate "exofs: OSD based file system support"
>  	depends on SCSI_OSD_ULD
> diff --git a/fs/exofs/ore.Kconfig b/fs/exofs/ore.Kconfig
> new file mode 100644
> index 0000000..1ca7fb7
> --- /dev/null
> +++ b/fs/exofs/ore.Kconfig
> @@ -0,0 +1,12 @@
> +# ORE - Objects Raid Engine (libore.ko)
> +#
> +# Note ORE needs to "select ASYNC_XOR". So Not to force multiple selects
> +# for every ORE user we do it like this. Any user should add itself here
> +# at the "depends on EXOFS_FS || ..." with an ||. The dependencies are
> +# selected here, and we default to "ON". So in effect it is like been
> +# selected by any of the users.
> +config ORE
> +	tristate
> +	depends on EXOFS_FS || PNFS_OBJLAYOUT
> +	select ASYNC_XOR
> +	default SCSI_OSD_ULD

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH v3] ore: FIX breakage when MISC_FILESYSTEMS is not set
  2011-11-29 23:35         ` [PATCH v3] " Boaz Harrosh
  2011-11-30  1:00           ` [osd-dev] " Boaz Harrosh
@ 2011-11-30  8:31           ` Michal Marek
  2011-11-30 16:32             ` Boaz Harrosh
  1 sibling, 1 reply; 17+ messages in thread
From: Michal Marek @ 2011-11-30  8:31 UTC (permalink / raw)
  To: Boaz Harrosh
  Cc: Randy Dunlap, Trond Myklebust, Stephen Rothwell, NFS list, LKML,
	Benny Halevy, linux-next, open-osd

Dne 30.11.2011 00:35, Boaz Harrosh napsal(a):
> 
> As Reported by Randy Dunlap
> 
> When MISC_FILESYSTEMS is not enabled:
> 
> fs/built-in.o: In function `objio_alloc_io_state':
> objio_osd.c:(.text+0xcb525): undefined reference to `ore_get_rw_state'
> fs/built-in.o: In function `_write_done':
> objio_osd.c:(.text+0xcb58d): undefined reference to `ore_check_io'
> fs/built-in.o: In function `_read_done':
> ...
> 
> When MISC_FILESYSTEMS, which is more of a GUI thing then anything else,
> is not selected. exofs/Kconfig is never examined during Kconfig,
> and it can not do it's magic stuff to automatically select everything
> needed.
> 
> We must split exofs/Kconfig in two. The ore one is always included.
> And the exofs one is left in it's old place in the menu.
> 
> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
> ---
>  fs/Kconfig           |    2 ++
>  fs/exofs/Kconfig     |   11 -----------
>  fs/exofs/ore.Kconfig |   12 ++++++++++++
>  3 files changed, 14 insertions(+), 11 deletions(-)
>  create mode 100644 fs/exofs/ore.Kconfig
> 
> diff --git a/fs/Kconfig b/fs/Kconfig
> index 5f4c45d..fd7bfef 100644
> --- a/fs/Kconfig
> +++ b/fs/Kconfig
> @@ -218,6 +218,8 @@ source "fs/exofs/Kconfig"
>  
>  endif # MISC_FILESYSTEMS
>  
> +source "fs/exofs/ore.Kconfig"
> +

I suggest you name it Kconfig.ore. We have a couple of Kconfig.* files
in the tree, so let's be consistent.

Michal

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH v3] ore: FIX breakage when MISC_FILESYSTEMS is not set
  2011-11-30  8:31           ` Michal Marek
@ 2011-11-30 16:32             ` Boaz Harrosh
  0 siblings, 0 replies; 17+ messages in thread
From: Boaz Harrosh @ 2011-11-30 16:32 UTC (permalink / raw)
  To: Michal Marek
  Cc: Randy Dunlap, Trond Myklebust, Stephen Rothwell, NFS list, LKML,
	Benny Halevy, linux-next, open-osd

On 11/30/2011 12:31 AM, Michal Marek wrote:
> 
> I suggest you name it Kconfig.ore. We have a couple of Kconfig.* files
> in the tree, so let's be consistent.
> 

Thanks Michal.

Yes that makes sense. Actually I like it better.
Will change and push

> Michal

Boaz

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [osd-dev] [PATCH v3] ore: FIX breakage when MISC_FILESYSTEMS is not set
  2011-11-30  1:00           ` [osd-dev] " Boaz Harrosh
@ 2011-11-30 18:00             ` Randy Dunlap
  0 siblings, 0 replies; 17+ messages in thread
From: Randy Dunlap @ 2011-11-30 18:00 UTC (permalink / raw)
  To: Boaz Harrosh
  Cc: Trond Myklebust, Michal Marek, Stephen Rothwell, NFS list, LKML,
	Benny Halevy, linux-next, open-osd

On 11/29/2011 05:00 PM, Boaz Harrosh wrote:
> On 11/29/2011 03:35 PM, Boaz Harrosh wrote:
>>
>> As Reported by Randy Dunlap
>>
> 
> Randy Hi
> 
> I think I prefer this simple solution for now, instead of
> the complete move of the ore to lib/

sounds good to me.

> It solves the warning problem you reported and let us
> keep the convenience of selecting everything in one place. As
> was said there are more dependencies on the way.
> 
> I will look into the additional ASYNC_CORE and XOR_BLOCKS selects
> you mentioned. For some reason it works but I'll try to find a
> way to break it or prove It is sound.
> 
> Please advise?

I'm not terribly worried about them.  If they work, that's fine.
If they break some day, it's easy to fix.
or if you prefer to fix it now, you could add something like:

# for ASYNC_XOR selects:
	select ASYNC_CORE
	select XOR_BLOCKS

Either way is OK with me.


Thanks.

> Thanks
> Heart
> 
>> When MISC_FILESYSTEMS is not enabled:
>>
>> fs/built-in.o: In function `objio_alloc_io_state':
>> objio_osd.c:(.text+0xcb525): undefined reference to `ore_get_rw_state'
>> fs/built-in.o: In function `_write_done':
>> objio_osd.c:(.text+0xcb58d): undefined reference to `ore_check_io'
>> fs/built-in.o: In function `_read_done':
>> ...
>>
>> When MISC_FILESYSTEMS, which is more of a GUI thing then anything else,
>> is not selected. exofs/Kconfig is never examined during Kconfig,
>> and it can not do it's magic stuff to automatically select everything
>> needed.
>>
>> We must split exofs/Kconfig in two. The ore one is always included.
>> And the exofs one is left in it's old place in the menu.
>>
>> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
>> ---
>>  fs/Kconfig           |    2 ++
>>  fs/exofs/Kconfig     |   11 -----------
>>  fs/exofs/ore.Kconfig |   12 ++++++++++++
>>  3 files changed, 14 insertions(+), 11 deletions(-)
>>  create mode 100644 fs/exofs/ore.Kconfig
>>
>> diff --git a/fs/Kconfig b/fs/Kconfig
>> index 5f4c45d..fd7bfef 100644
>> --- a/fs/Kconfig
>> +++ b/fs/Kconfig
>> @@ -218,6 +218,8 @@ source "fs/exofs/Kconfig"
>>  
>>  endif # MISC_FILESYSTEMS
>>  
>> +source "fs/exofs/ore.Kconfig"
>> +
>>  menuconfig NETWORK_FILESYSTEMS
>>  	bool "Network File Systems"
>>  	default y
>> diff --git a/fs/exofs/Kconfig b/fs/exofs/Kconfig
>> index da42f32..86194b2 100644
>> --- a/fs/exofs/Kconfig
>> +++ b/fs/exofs/Kconfig
>> @@ -1,14 +1,3 @@
>> -# Note ORE needs to "select ASYNC_XOR". So Not to force multiple selects
>> -# for every ORE user we do it like this. Any user should add itself here
>> -# at the "depends on EXOFS_FS || ..." with an ||. The dependencies are
>> -# selected here, and we default to "ON". So in effect it is like been
>> -# selected by any of the users.
>> -config ORE
>> -	tristate
>> -	depends on EXOFS_FS || PNFS_OBJLAYOUT
>> -	select ASYNC_XOR
>> -	default SCSI_OSD_ULD
>> -
>>  config EXOFS_FS
>>  	tristate "exofs: OSD based file system support"
>>  	depends on SCSI_OSD_ULD
>> diff --git a/fs/exofs/ore.Kconfig b/fs/exofs/ore.Kconfig
>> new file mode 100644
>> index 0000000..1ca7fb7
>> --- /dev/null
>> +++ b/fs/exofs/ore.Kconfig
>> @@ -0,0 +1,12 @@
>> +# ORE - Objects Raid Engine (libore.ko)
>> +#
>> +# Note ORE needs to "select ASYNC_XOR". So Not to force multiple selects
>> +# for every ORE user we do it like this. Any user should add itself here
>> +# at the "depends on EXOFS_FS || ..." with an ||. The dependencies are
>> +# selected here, and we default to "ON". So in effect it is like been
>> +# selected by any of the users.
>> +config ORE
>> +	tristate
>> +	depends on EXOFS_FS || PNFS_OBJLAYOUT
>> +	select ASYNC_XOR
>> +	default SCSI_OSD_ULD
> 
> --


-- 
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***

^ permalink raw reply	[flat|nested] 17+ messages in thread

end of thread, other threads:[~2011-11-30 17:01 UTC | newest]

Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-11-24  6:43 linux-next: Tree for Nov 24 Stephen Rothwell
2011-11-24 18:50 ` linux-next: Tree for Nov 24 (fs/pnfs vs. exofs) Randy Dunlap
2011-11-29  0:09   ` Boaz Harrosh
     [not found]     ` <4ED422CC.60706-C4P08NqkoRlBDgjK7y7TUQ@public.gmane.org>
2011-11-29  0:13       ` ore: FIX breakage when MISC_FILESYSTEMS is not set Boaz Harrosh
2011-11-29 12:21         ` Benny Halevy
2011-11-29 17:33           ` Trond Myklebust
     [not found]             ` <1322588023.4174.28.camel-SyLVLa/KEI9HwK5hSS5vWB2eb7JE58TQ@public.gmane.org>
2011-11-29 22:22               ` Boaz Harrosh
     [not found]                 ` <4ED55B3B.9050207-C4P08NqkoRlBDgjK7y7TUQ@public.gmane.org>
2011-11-29 22:36                   ` Trond Myklebust
2011-11-29 22:38                     ` Trond Myklebust
2011-11-29 23:33                       ` Boaz Harrosh
2011-11-29 23:39                 ` Randy Dunlap
2011-11-29 23:30                   ` Boaz Harrosh
2011-11-29 23:35         ` [PATCH v3] " Boaz Harrosh
2011-11-30  1:00           ` [osd-dev] " Boaz Harrosh
2011-11-30 18:00             ` Randy Dunlap
2011-11-30  8:31           ` Michal Marek
2011-11-30 16:32             ` Boaz Harrosh

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).