From: Huang Rui <ray.huang@amd.com>
To: Felipe Balbi <balbi@ti.com>,
Alan Stern <stern@rowland.harvard.edu>,
"Bjorn Helgaas" <bhelgaas@google.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Paul Zimmerman <Paul.Zimmerman@synopsys.com>,
Heikki Krogerus <heikki.krogerus@linux.intel.com>,
Jason Chang <jason.chang@amd.com>,
"Vincent Wan" <vincent.wan@amd.com>, Tony Li <tony.li@amd.com>,
<linux-usb@vger.kernel.org>, <linux-pci@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, Huang Rui <ray.huang@amd.com>
Subject: [PATCH v3 13/19] usb: dwc3: add tx demphasis quirk
Date: Tue, 28 Oct 2014 19:54:34 +0800 [thread overview]
Message-ID: <1414497280-3126-14-git-send-email-ray.huang@amd.com> (raw)
In-Reply-To: <1414497280-3126-1-git-send-email-ray.huang@amd.com>
This patch adds Tx demphasis quirk, and the Tx demphasis value is
configurable according to PIPE3 specification.
Value Description
0 -6dB de-emphasis
1 -3.5dB de-emphasis
2 No de-emphasis
3 Reserved
It can be configured on DT or platform data.
Signed-off-by: Huang Rui <ray.huang@amd.com>
---
drivers/usb/dwc3/core.c | 17 +++++++++++++++++
drivers/usb/dwc3/core.h | 11 +++++++++++
drivers/usb/dwc3/platform_data.h | 3 +++
3 files changed, 31 insertions(+)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 19019dc..e36fcd0 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -392,6 +392,9 @@ static void dwc3_phy_setup(struct dwc3 *dwc)
if (dwc->rx_detect_poll_quirk)
reg |= DWC3_GUSB3PIPECTL_RX_DETOPOLL;
+ if (dwc->tx_deemph_quirk)
+ reg |= DWC3_GUSB3PIPECTL_TX_DEEPH(dwc->tx_deemph);
+
dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
mdelay(100);
@@ -691,6 +694,7 @@ static int dwc3_probe(struct platform_device *pdev)
struct resource *res;
struct dwc3 *dwc;
u8 lpm_nyet_thres;
+ u8 tx_deemph;
int ret;
@@ -749,6 +753,9 @@ static int dwc3_probe(struct platform_device *pdev)
/* default to highest possible threshold */
lpm_nyet_thres = 0xff;
+ /* default to -3.5dB de-emphasis */
+ tx_deemph = 1;
+
if (node) {
dwc->maximum_speed = of_usb_get_maximum_speed(node);
dwc->has_lpm_erratum = of_property_read_bool(node,
@@ -776,6 +783,11 @@ static int dwc3_probe(struct platform_device *pdev)
"snps,lfps_filter_quirk");
dwc->rx_detect_poll_quirk = of_property_read_bool(node,
"snps,rx_detect_poll_quirk");
+
+ dwc->tx_deemph_quirk = of_property_read_bool(node,
+ "snps,tx_deemph_quirk");
+ of_property_read_u8(node, "snps,tx_deemph",
+ &tx_deemph);
} else if (pdata) {
dwc->maximum_speed = pdata->maximum_speed;
dwc->has_lpm_erratum = pdata->has_lpm_erratum;
@@ -793,6 +805,10 @@ static int dwc3_probe(struct platform_device *pdev)
dwc->del_phy_power_chg_quirk = pdata->del_phy_power_chg_quirk;
dwc->lfps_filter_quirk = pdata->lfps_filter_quirk;
dwc->rx_detect_poll_quirk = pdata->rx_detect_poll_quirk;
+
+ dwc->tx_deemph_quirk = pdata->tx_deemph_quirk;
+ if (pdata->tx_deemph)
+ tx_deemph = pdata->tx_deemph;
}
/* default to superspeed if no maximum_speed passed */
@@ -800,6 +816,7 @@ static int dwc3_probe(struct platform_device *pdev)
dwc->maximum_speed = USB_SPEED_SUPER;
dwc->lpm_nyet_thres = lpm_nyet_thres;
+ dwc->tx_deemph = tx_deemph;
ret = dwc3_core_get_phy(dwc);
if (ret)
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 57a203a..1277dcf 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -185,6 +185,8 @@
#define DWC3_GUSB3PIPECTL_SUSPHY (1 << 17)
#define DWC3_GUSB3PIPECTL_LFPSFILT (1 << 9)
#define DWC3_GUSB3PIPECTL_RX_DETOPOLL (1 << 8)
+#define DWC3_GUSB3PIPECTL_TX_DEEPH_MASK DWC3_GUSB3PIPECTL_TX_DEEPH(3)
+#define DWC3_GUSB3PIPECTL_TX_DEEPH(n) ((n) << 1)
/* Global TX Fifo Size Register */
#define DWC3_GTXFIFOSIZ_TXFDEF(n) ((n) & 0xffff)
@@ -695,6 +697,12 @@ struct dwc3_scratchpad_array {
* @del_phy_power_chg_quirk: set if we enable delay phy power change quirk
* @lfps_filter_quirk: set if we enable LFPS filter quirk
* @rx_detect_poll_quirk: set if we enable rx_detect to polling lfps quirk
+ * @tx_deemph_quirk: set if we enable Tx deemphasis quirk
+ * @tx_deemph: Tx deemphasis value
+ * 0 - -6dB de-emphasis
+ * 1 - -3.5dB de-emphasis
+ * 2 - No de-emphasis
+ * 3 - Reserved
*/
struct dwc3 {
struct usb_ctrlrequest *ctrl_req;
@@ -810,6 +818,9 @@ struct dwc3 {
unsigned del_phy_power_chg_quirk:1;
unsigned lfps_filter_quirk:1;
unsigned rx_detect_poll_quirk:1;
+
+ unsigned tx_deemph_quirk:1;
+ unsigned tx_deemph:2;
};
/* -------------------------------------------------------------------------- */
diff --git a/drivers/usb/dwc3/platform_data.h b/drivers/usb/dwc3/platform_data.h
index 9776764..ea631dc 100644
--- a/drivers/usb/dwc3/platform_data.h
+++ b/drivers/usb/dwc3/platform_data.h
@@ -35,4 +35,7 @@ struct dwc3_platform_data {
unsigned del_phy_power_chg_quirk:1;
unsigned lfps_filter_quirk:1;
unsigned rx_detect_poll_quirk:1;
+
+ unsigned tx_deemph_quirk:1;
+ unsigned tx_deemph:2;
};
--
1.9.1
next prev parent reply other threads:[~2014-10-28 11:56 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-28 11:54 [PATCH v3 00/19] usb: dwc3: add support for AMD Nolan SoC Huang Rui
2014-10-28 11:54 ` [PATCH v3 01/19] usb: dwc3: enable hibernation if to be supported Huang Rui
2014-10-28 18:47 ` Paul Zimmerman
2014-10-28 18:50 ` Felipe Balbi
2014-10-28 18:55 ` Paul Zimmerman
2014-10-28 19:01 ` Felipe Balbi
2014-10-28 19:15 ` Paul Zimmerman
2014-10-28 19:18 ` Felipe Balbi
2014-10-29 6:53 ` Huang Rui
2014-10-28 11:54 ` [PATCH v3 02/19] usb: dwc3: add a flag to check if it is fpga board Huang Rui
2014-10-28 11:54 ` [PATCH v3 03/19] usb: dwc3: initialize platform data at pci glue layer Huang Rui
2014-10-28 11:54 ` [PATCH v3 04/19] usb: dwc3: add disscramble quirk Huang Rui
2014-10-28 16:39 ` Bjorn Helgaas
2014-10-28 18:42 ` Felipe Balbi
2014-10-29 6:50 ` Huang Rui
2014-10-28 11:54 ` [PATCH v3 05/19] usb: dwc3: add lpm erratum support Huang Rui
2014-10-28 16:30 ` Bjorn Helgaas
2014-10-29 7:44 ` Huang Rui
2014-10-28 11:54 ` [PATCH v3 06/19] usb: dwc3: add u2exit lfps quirk Huang Rui
2014-10-28 11:54 ` [PATCH v3 07/19] usb: dwc3: add P3 in U2 SS inactive quirk Huang Rui
2014-10-28 11:54 ` [PATCH v3 08/19] usb: dwc3: add request p1p2p3 quirk Huang Rui
2014-10-28 11:54 ` [PATCH v3 09/19] usb: dwc3: add delay " Huang Rui
2014-10-28 11:54 ` [PATCH v3 10/19] usb: dwc3: add delay phy power change quirk Huang Rui
2014-10-28 11:54 ` [PATCH v3 11/19] usb: dwc3: add lfps filter quirk Huang Rui
2014-10-28 11:54 ` [PATCH v3 12/19] usb: dwc3: add rx_detect to polling lfps quirk Huang Rui
2014-10-28 11:54 ` Huang Rui [this message]
2014-10-28 16:27 ` [PATCH v3 13/19] usb: dwc3: add tx demphasis quirk Bjorn Helgaas
2014-10-28 18:43 ` Felipe Balbi
2014-10-29 8:08 ` Huang Rui
2014-10-28 11:54 ` [PATCH v3 14/19] usb: dwc3: set SUSPHY bit for all cores Huang Rui
2014-10-28 11:54 ` [PATCH v3 15/19] usb: dwc3: add disable usb3 suspend phy quirk Huang Rui
2014-10-28 11:54 ` [PATCH v3 16/19] usb: dwc3: add disable usb2 " Huang Rui
2014-10-28 11:54 ` [PATCH v3 17/19] PCI: Add support for AMD Nolan USB3 DRD Huang Rui
2014-10-28 13:30 ` Bjorn Helgaas
2014-10-28 11:54 ` [PATCH v3 18/19] PCI: Add quirk to prevent AMD NL USB3 DRD to bind with xHCI driver Huang Rui
2014-10-28 12:06 ` Sergei Shtylyov
2014-10-28 12:15 ` Huang Rui
2014-10-28 13:29 ` Bjorn Helgaas
2014-10-28 11:54 ` [PATCH v3 19/19] usb: dwc3: add support for AMD NL platform Huang Rui
2014-10-28 13:38 ` Felipe Balbi
2014-10-28 14:35 ` Huang Rui
2014-10-29 9:13 ` Huang Rui
2014-10-29 14:11 ` Felipe Balbi
2014-10-29 14:33 ` Huang Rui
2014-10-29 14:48 ` Felipe Balbi
2014-10-28 14:41 ` [PATCH v3 00/19] usb: dwc3: add support for AMD Nolan SoC Felipe Balbi
2014-10-28 15:17 ` Huang Rui
2014-10-28 15:23 ` Felipe Balbi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1414497280-3126-14-git-send-email-ray.huang@amd.com \
--to=ray.huang@amd.com \
--cc=Paul.Zimmerman@synopsys.com \
--cc=balbi@ti.com \
--cc=bhelgaas@google.com \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=jason.chang@amd.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=stern@rowland.harvard.edu \
--cc=tony.li@amd.com \
--cc=vincent.wan@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).