RE: [PATCH v3 01/19] usb: dwc3: enable hibernation if to be supported

[Paul Zimmerman <Paul.Zimmerman@synopsys.com>]

> From: Felipe Balbi [mailto:balbi@ti.com]
> Sent: Tuesday, October 28, 2014 11:51 AM
> 
> On Tue, Oct 28, 2014 at 06:47:08PM +0000, Paul Zimmerman wrote:
> > > From: Huang Rui [mailto:ray.huang@amd.com]
> > > Sent: Tuesday, October 28, 2014 4:54 AM
> > >
> > > It enables hibernation if the function is set in coreConsultant.
> > >
> > > Suggested-by: Felipe Balbi <balbi@ti.com>
> > > Signed-off-by: Huang Rui <ray.huang@amd.com>
> > > ---
> > >  drivers/usb/dwc3/core.c | 1 +
> > >  1 file changed, 1 insertion(+)
> > >
> > > diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> > > index fa396fc..bf77509 100644
> > > --- a/drivers/usb/dwc3/core.c
> > > +++ b/drivers/usb/dwc3/core.c
> > > @@ -449,6 +449,7 @@ static int dwc3_core_init(struct dwc3 *dwc)
> > >  	case DWC3_GHWPARAMS1_EN_PWROPT_HIB:
> > >  		/* enable hibernation here */
> > >  		dwc->nr_scratch = DWC3_GHWPARAMS4_HIBER_SCRATCHBUFS(hwparams4);
> > > +		reg |= DWC3_GCTL_GBLHIBERNATIONEN;
> > >  		break;
> > >  	default:
> > >  		dev_dbg(dwc->dev, "No power optimization available\n");
> >
> > What effect does this have when the controller is in device mode? I
> > expect it will start generating DWC3_DEVICE_EVENT_HIBER_REQ interrupt
> > events when this register bit is set. So the dev_WARN_ONCE in
> > dwc3_gadget_interrupt() will start firing, I think.
> 
> Ok, so this *has* to wait for proper hibernation support ?

Ah, never mind. Since the hibernation event is not enabled in the
DEVTEN register, the controller shouldn't generate that event after
all. So I think it should be OK. Sorry for the noise.

-- 
Paul