linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bjorn Helgaas <bhelgaas@google.com>
To: Huang Rui <ray.huang@amd.com>
Cc: Felipe Balbi <balbi@ti.com>,
	Alan Stern <stern@rowland.harvard.edu>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Paul Zimmerman <Paul.Zimmerman@synopsys.com>,
	Heikki Krogerus <heikki.krogerus@linux.intel.com>,
	Jason Chang <jason.chang@amd.com>,
	Vincent Wan <vincent.wan@amd.com>, Tony Li <tony.li@amd.com>,
	USB list <linux-usb@vger.kernel.org>,
	"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v3 04/19] usb: dwc3: add disscramble quirk
Date: Tue, 28 Oct 2014 10:39:26 -0600	[thread overview]
Message-ID: <CAErSpo5vRcGxu=e61tCEwNVL913_Lxne=1KW+JtQVpc6jgCaHg@mail.gmail.com> (raw)
In-Reply-To: <1414497280-3126-5-git-send-email-ray.huang@amd.com>

On Tue, Oct 28, 2014 at 5:54 AM, Huang Rui <ray.huang@amd.com> wrote:
> This patch adds disscramble quirk, and it only needs to be enabled at fpga

"disscramble" (in subject and above) is not a real word.

I see that DWC3_GCTL_DISSCRAMBLE is already defined in
drivers/usb/dwc3/core.h even before your patches, so I suppose it's
something the hardware designers made up.

Maybe it means "descramble" (or "unscramble").  Or maybe it means
"disable scrambling"?  A comment might make this clearer.  A better
name would be even better.

> board on some vendor platforms.
>
> Signed-off-by: Huang Rui <ray.huang@amd.com>
> ---
>  drivers/usb/dwc3/core.c          | 14 +++++++++++++-
>  drivers/usb/dwc3/core.h          |  3 +++
>  drivers/usb/dwc3/platform_data.h |  2 ++
>  3 files changed, 18 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index ddac372..c320835 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -422,7 +422,6 @@ static int dwc3_core_init(struct dwc3 *dwc)
>
>         reg = dwc3_readl(dwc->regs, DWC3_GCTL);
>         reg &= ~DWC3_GCTL_SCALEDOWN_MASK;
> -       reg &= ~DWC3_GCTL_DISSCRAMBLE;
>
>         switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1)) {
>         case DWC3_GHWPARAMS1_EN_PWROPT_CLK:
> @@ -461,6 +460,14 @@ static int dwc3_core_init(struct dwc3 *dwc)
>                 dwc->is_fpga = true;
>         }
>
> +       WARN_ONCE(dwc->disable_scramble_quirk && !dwc->is_fpga,
> +                       "disable_scramble cannot be used on non-FPGA builds\n");
> +
> +       if (dwc->disable_scramble_quirk && dwc->is_fpga)
> +               reg |= DWC3_GCTL_DISSCRAMBLE;
> +       else
> +               reg &= ~DWC3_GCTL_DISSCRAMBLE;
> +
>         /*
>          * WORKAROUND: DWC3 revisions <1.90a have a bug
>          * where the device can fail to connect at SuperSpeed
> @@ -705,11 +712,16 @@ static int dwc3_probe(struct platform_device *pdev)
>
>                 dwc->needs_fifo_resize = of_property_read_bool(node, "tx-fifo-resize");
>                 dwc->dr_mode = of_usb_get_dr_mode(node);
> +
> +               dwc->disable_scramble_quirk = of_property_read_bool(node,
> +                               "snps,disable_scramble_quirk");
>         } else if (pdata) {
>                 dwc->maximum_speed = pdata->maximum_speed;
>
>                 dwc->needs_fifo_resize = pdata->tx_fifo_resize;
>                 dwc->dr_mode = pdata->dr_mode;
> +
> +               dwc->disable_scramble_quirk = pdata->disable_scramble_quirk;
>         }
>
>         /* default to superspeed if no maximum_speed passed */
> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
> index f6ee623..56bada6 100644
> --- a/drivers/usb/dwc3/core.h
> +++ b/drivers/usb/dwc3/core.h
> @@ -672,6 +672,7 @@ struct dwc3_scratchpad_array {
>   * @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround
>   * @start_config_issued: true when StartConfig command has been issued
>   * @three_stage_setup: set if we perform a three phase setup
> + * @disable_scramble_quirk: set if we enable the disable scramble quirk
>   */
>  struct dwc3 {
>         struct usb_ctrlrequest  *ctrl_req;
> @@ -776,6 +777,8 @@ struct dwc3 {
>         unsigned                setup_packet_pending:1;
>         unsigned                start_config_issued:1;
>         unsigned                three_stage_setup:1;
> +
> +       unsigned                disable_scramble_quirk:1;
>  };
>
>  /* -------------------------------------------------------------------------- */
> diff --git a/drivers/usb/dwc3/platform_data.h b/drivers/usb/dwc3/platform_data.h
> index 7db34f0..9209d02 100644
> --- a/drivers/usb/dwc3/platform_data.h
> +++ b/drivers/usb/dwc3/platform_data.h
> @@ -24,4 +24,6 @@ struct dwc3_platform_data {
>         enum usb_device_speed maximum_speed;
>         enum usb_dr_mode dr_mode;
>         bool tx_fifo_resize;
> +
> +       unsigned disable_scramble_quirk:1;
>  };
> --
> 1.9.1
>

  reply	other threads:[~2014-10-28 16:39 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-28 11:54 [PATCH v3 00/19] usb: dwc3: add support for AMD Nolan SoC Huang Rui
2014-10-28 11:54 ` [PATCH v3 01/19] usb: dwc3: enable hibernation if to be supported Huang Rui
2014-10-28 18:47   ` Paul Zimmerman
2014-10-28 18:50     ` Felipe Balbi
2014-10-28 18:55       ` Paul Zimmerman
2014-10-28 19:01         ` Felipe Balbi
2014-10-28 19:15           ` Paul Zimmerman
2014-10-28 19:18             ` Felipe Balbi
2014-10-29  6:53               ` Huang Rui
2014-10-28 11:54 ` [PATCH v3 02/19] usb: dwc3: add a flag to check if it is fpga board Huang Rui
2014-10-28 11:54 ` [PATCH v3 03/19] usb: dwc3: initialize platform data at pci glue layer Huang Rui
2014-10-28 11:54 ` [PATCH v3 04/19] usb: dwc3: add disscramble quirk Huang Rui
2014-10-28 16:39   ` Bjorn Helgaas [this message]
2014-10-28 18:42     ` Felipe Balbi
2014-10-29  6:50     ` Huang Rui
2014-10-28 11:54 ` [PATCH v3 05/19] usb: dwc3: add lpm erratum support Huang Rui
2014-10-28 16:30   ` Bjorn Helgaas
2014-10-29  7:44     ` Huang Rui
2014-10-28 11:54 ` [PATCH v3 06/19] usb: dwc3: add u2exit lfps quirk Huang Rui
2014-10-28 11:54 ` [PATCH v3 07/19] usb: dwc3: add P3 in U2 SS inactive quirk Huang Rui
2014-10-28 11:54 ` [PATCH v3 08/19] usb: dwc3: add request p1p2p3 quirk Huang Rui
2014-10-28 11:54 ` [PATCH v3 09/19] usb: dwc3: add delay " Huang Rui
2014-10-28 11:54 ` [PATCH v3 10/19] usb: dwc3: add delay phy power change quirk Huang Rui
2014-10-28 11:54 ` [PATCH v3 11/19] usb: dwc3: add lfps filter quirk Huang Rui
2014-10-28 11:54 ` [PATCH v3 12/19] usb: dwc3: add rx_detect to polling lfps quirk Huang Rui
2014-10-28 11:54 ` [PATCH v3 13/19] usb: dwc3: add tx demphasis quirk Huang Rui
2014-10-28 16:27   ` Bjorn Helgaas
2014-10-28 18:43     ` Felipe Balbi
2014-10-29  8:08       ` Huang Rui
2014-10-28 11:54 ` [PATCH v3 14/19] usb: dwc3: set SUSPHY bit for all cores Huang Rui
2014-10-28 11:54 ` [PATCH v3 15/19] usb: dwc3: add disable usb3 suspend phy quirk Huang Rui
2014-10-28 11:54 ` [PATCH v3 16/19] usb: dwc3: add disable usb2 " Huang Rui
2014-10-28 11:54 ` [PATCH v3 17/19] PCI: Add support for AMD Nolan USB3 DRD Huang Rui
2014-10-28 13:30   ` Bjorn Helgaas
2014-10-28 11:54 ` [PATCH v3 18/19] PCI: Add quirk to prevent AMD NL USB3 DRD to bind with xHCI driver Huang Rui
2014-10-28 12:06   ` Sergei Shtylyov
2014-10-28 12:15     ` Huang Rui
2014-10-28 13:29   ` Bjorn Helgaas
2014-10-28 11:54 ` [PATCH v3 19/19] usb: dwc3: add support for AMD NL platform Huang Rui
2014-10-28 13:38   ` Felipe Balbi
2014-10-28 14:35     ` Huang Rui
2014-10-29  9:13       ` Huang Rui
2014-10-29 14:11         ` Felipe Balbi
2014-10-29 14:33           ` Huang Rui
2014-10-29 14:48             ` Felipe Balbi
2014-10-28 14:41 ` [PATCH v3 00/19] usb: dwc3: add support for AMD Nolan SoC Felipe Balbi
2014-10-28 15:17   ` Huang Rui
2014-10-28 15:23     ` Felipe Balbi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAErSpo5vRcGxu=e61tCEwNVL913_Lxne=1KW+JtQVpc6jgCaHg@mail.gmail.com' \
    --to=bhelgaas@google.com \
    --cc=Paul.Zimmerman@synopsys.com \
    --cc=balbi@ti.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=jason.chang@amd.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=ray.huang@amd.com \
    --cc=stern@rowland.harvard.edu \
    --cc=tony.li@amd.com \
    --cc=vincent.wan@amd.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).