From: Gustavo Pimentel <Gustavo.Pimentel@synopsys.com>
To: Dilip Kota <eswara.kota@linux.intel.com>,
"jingoohan1@gmail.com" <jingoohan1@gmail.com>,
"gustavo.pimentel@synopsys.com" <Gustavo.Pimentel@synopsys.com>,
"lorenzo.pieralisi@arm.com" <lorenzo.pieralisi@arm.com>,
"andrew.murray@arm.com" <andrew.murray@arm.com>,
"robh@kernel.org" <robh@kernel.org>,
"martin.blumenstingl@googlemail.com"
<martin.blumenstingl@googlemail.com>,
"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
"hch@infradead.org" <hch@infradead.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"andriy.shevchenko@intel.com" <andriy.shevchenko@intel.com>,
"cheol.yong.kim@intel.com" <cheol.yong.kim@intel.com>,
"chuanhua.lei@linux.intel.com" <chuanhua.lei@linux.intel.com>,
"qi-ming.wu@intel.com" <qi-ming.wu@intel.com>
Subject: RE: [PATCH v4 3/3] pci: intel: Add sysfs attributes to configure pcie link
Date: Mon, 21 Oct 2019 08:40:01 +0000 [thread overview]
Message-ID: <CH2PR12MB400776877B54F866691CA201DA690@CH2PR12MB4007.namprd12.prod.outlook.com> (raw)
In-Reply-To: <d8574605f8e70f41ce1e88ccfb56b63c8f85e4df.1571638827.git.eswara.kota@linux.intel.com>
On Mon, Oct 21, 2019 at 7:39:20, Dilip Kota <eswara.kota@linux.intel.com>
wrote:
> PCIe RC driver on Intel Gateway SoCs have a requirement
> of changing link width and speed on the fly.
> So add the sysfs attributes to show and store the link
> properties.
> Add the respective link resize function in pcie DesignWare
> framework so that Intel PCIe driver can use during link
> width configuration on the fly.
>
> Signed-off-by: Dilip Kota <eswara.kota@linux.intel.com>
> ---
> drivers/pci/controller/dwc/pcie-designware.c | 9 +++
> drivers/pci/controller/dwc/pcie-designware.h | 3 +
> drivers/pci/controller/dwc/pcie-intel-gw.c | 112 ++++++++++++++++++++++++++-
> 3 files changed, 123 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
> index 4c391bfd681a..662fdcb4f2d6 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.c
> +++ b/drivers/pci/controller/dwc/pcie-designware.c
> @@ -474,6 +474,15 @@ int dw_pcie_link_up(struct dw_pcie *pci)
> (!(val & PCIE_PORT_DEBUG1_LINK_IN_TRAINING)));
> }
>
> +void dw_pcie_link_width_resize(struct dw_pcie *pci, u32 lane_width)
> +{
> + u32 val;
> +
> + val = dw_pcie_readl_dbi(pci, PCIE_PORT_MULTI_LANE_CTRL);
> + val &= ~(PORT_MLTI_LNK_WDTH_CHNG | PORT_MLTI_LNK_WDTH);
> + val |= PORT_MLTI_LNK_WDTH_CHNG | lane_width;
> + dw_pcie_writel_dbi(pci, PCIE_PORT_MULTI_LANE_CTRL, val);
> +}
>
> void dw_pcie_upconfig_setup(struct dw_pcie *pci)
> {
> diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
> index 3beac10e4a4c..fcf0442341fd 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.h
> +++ b/drivers/pci/controller/dwc/pcie-designware.h
> @@ -67,6 +67,8 @@
> #define PCIE_MSI_INTR0_STATUS 0x830
>
> #define PCIE_PORT_MULTI_LANE_CTRL 0x8C0
> +#define PORT_MLTI_LNK_WDTH GENMASK(5, 0)
> +#define PORT_MLTI_LNK_WDTH_CHNG BIT(6)
> #define PORT_MLTI_UPCFG_SUPPORT BIT(7)
>
> #define PCIE_ATU_VIEWPORT 0x900
> @@ -282,6 +284,7 @@ void dw_pcie_write_dbi2(struct dw_pcie *pci, u32 reg, size_t size, u32 val);
> u32 dw_pcie_read_atu(struct dw_pcie *pci, u32 reg, size_t size);
> void dw_pcie_write_atu(struct dw_pcie *pci, u32 reg, size_t size, u32 val);
> int dw_pcie_link_up(struct dw_pcie *pci);
> +void dw_pcie_link_width_resize(struct dw_pcie *pci, u32 lane_width);
> void dw_pcie_upconfig_setup(struct dw_pcie *pci);
> void dw_pcie_link_speed_change(struct dw_pcie *pci, bool enable);
> void dw_pcie_link_set_n_fts(struct dw_pcie *pci, u32 n_fts);
> diff --git a/drivers/pci/controller/dwc/pcie-intel-gw.c b/drivers/pci/controller/dwc/pcie-intel-gw.c
> index 9142c70db808..b9be0921671d 100644
> --- a/drivers/pci/controller/dwc/pcie-intel-gw.c
> +++ b/drivers/pci/controller/dwc/pcie-intel-gw.c
> @@ -146,6 +146,22 @@ static void intel_pcie_ltssm_disable(struct intel_pcie_port *lpp)
> pcie_app_wr_mask(lpp, PCIE_APP_CCR_LTSSM_ENABLE, 0, PCIE_APP_CCR);
> }
>
> +static const char *pcie_link_gen_to_str(int gen)
> +{
> + switch (gen) {
> + case PCIE_LINK_SPEED_GEN1:
> + return "2.5";
> + case PCIE_LINK_SPEED_GEN2:
> + return "5.0";
> + case PCIE_LINK_SPEED_GEN3:
> + return "8.0";
> + case PCIE_LINK_SPEED_GEN4:
> + return "16.0";
> + default:
> + return "???";
> + }
> +}
> +
> static void intel_pcie_link_setup(struct intel_pcie_port *lpp)
> {
> u32 val;
> @@ -444,6 +460,91 @@ static int intel_pcie_host_setup(struct intel_pcie_port *lpp)
> return ret;
> }
>
> +static ssize_t pcie_link_status_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct intel_pcie_port *lpp = dev_get_drvdata(dev);
> + u32 reg, width, gen;
> +
> + reg = pcie_rc_cfg_rd(lpp, PCIE_CAP_OFST + PCI_EXP_LNKCTL);
> + width = FIELD_GET(PCI_EXP_LNKSTA_NLW, reg >> 16);
> + gen = FIELD_GET(PCI_EXP_LNKSTA_CLS, reg >> 16);
> +
> + if (gen > lpp->max_speed)
> + return -EINVAL;
> +
> + return sprintf(buf, "Port %2u Width x%u Speed %s GT/s\n", lpp->id,
> + width, pcie_link_gen_to_str(gen));
> +}
> +static DEVICE_ATTR_RO(pcie_link_status);
Dilip please check pci.h there are there already enums and strings
relatively to PCIe speed and width, that you can use.
> +
> +static ssize_t pcie_speed_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t len)
> +{
> + struct intel_pcie_port *lpp = dev_get_drvdata(dev);
> + unsigned long val;
> + int ret;
> +
> + ret = kstrtoul(buf, 10, &val);
> + if (ret)
> + return ret;
> +
> + if (val > lpp->max_speed)
> + return -EINVAL;
> +
> + lpp->link_gen = val;
> + intel_pcie_max_speed_setup(lpp);
> + dw_pcie_link_speed_change(&lpp->pci, false);
> + dw_pcie_link_speed_change(&lpp->pci, true);
> +
> + return len;
> +}
> +static DEVICE_ATTR_WO(pcie_speed);
> +
> +/*
> + * Link width change on the fly is not always successful.
> + * It also depends on the partner.
> + */
> +static ssize_t pcie_width_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t len)
> +{
> + struct intel_pcie_port *lpp = dev_get_drvdata(dev);
> + unsigned long val;
> + int ret;
> +
> + lpp = dev_get_drvdata(dev);
> +
> + ret = kstrtoul(buf, 10, &val);
> + if (ret)
> + return ret;
> +
> + if (val > lpp->max_width)
> + return -EINVAL;
> +
> + /* HW auto bandwidth negotiation must be enabled */
> + pcie_rc_cfg_wr_mask(lpp, PCI_EXP_LNKCTL_HAWD, 0,
> + PCIE_CAP_OFST + PCI_EXP_LNKCTL);
> + dw_pcie_link_width_resize(&lpp->pci, val);
> +
> + return len;
> +}
> +static DEVICE_ATTR_WO(pcie_width);
> +
> +static struct attribute *pcie_cfg_attrs[] = {
> + &dev_attr_pcie_link_status.attr,
> + &dev_attr_pcie_speed.attr,
> + &dev_attr_pcie_width.attr,
> + NULL,
> +};
> +ATTRIBUTE_GROUPS(pcie_cfg);
> +
> +static int intel_pcie_sysfs_init(struct intel_pcie_port *lpp)
> +{
> + return devm_device_add_groups(lpp->pci.dev, pcie_cfg_groups);
> +}
> +
> static void __intel_pcie_remove(struct intel_pcie_port *lpp)
> {
> intel_pcie_core_irq_disable(lpp);
> @@ -490,8 +591,17 @@ static int intel_pcie_rc_init(struct pcie_port *pp)
> {
> struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> struct intel_pcie_port *lpp = dev_get_drvdata(pci->dev);
> + int ret;
>
> - return intel_pcie_host_setup(lpp);
> + ret = intel_pcie_host_setup(lpp);
> + if (ret)
> + return ret;
> +
> + ret = intel_pcie_sysfs_init(lpp);
> + if (ret)
> + __intel_pcie_remove(lpp);
> +
> + return ret;
> }
>
> int intel_pcie_msi_init(struct pcie_port *pp)
> --
> 2.11.0
next prev parent reply other threads:[~2019-10-21 8:41 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-21 6:39 [PATCH v4 0/3] PCI: Add Intel PCIe Driver and respective dt-binding yaml file Dilip Kota
2019-10-21 6:39 ` [PATCH v4 1/3] dt-bindings: PCI: intel: Add YAML schemas for the PCIe RC controller Dilip Kota
2019-10-21 11:19 ` Andrew Murray
2019-10-22 10:15 ` Dilip Kota
2019-10-24 20:31 ` Martin Blumenstingl
2019-10-29 7:53 ` Dilip Kota
2019-10-25 16:53 ` Rob Herring
2019-10-29 8:34 ` Dilip Kota
2019-10-31 10:51 ` Dilip Kota
2019-10-31 18:35 ` Rob Herring
2019-10-21 6:39 ` [PATCH v4 2/3] dwc: PCI: intel: PCIe RC controller driver Dilip Kota
2019-10-21 8:29 ` Gustavo Pimentel
2019-10-21 10:44 ` Dilip Kota
2019-10-22 10:18 ` Dilip Kota
2019-10-22 11:44 ` andriy.shevchenko
2019-10-25 9:01 ` Andrew Murray
2019-10-29 6:14 ` Dilip Kota
2019-10-21 13:03 ` Andrew Murray
2019-10-22 9:04 ` Dilip Kota
2019-10-25 9:09 ` Andrew Murray
2019-10-29 8:59 ` Dilip Kota
2019-11-01 10:59 ` Andrew Murray
2019-11-04 9:34 ` Dilip Kota
2019-11-04 10:47 ` Andrew Murray
2019-10-21 17:17 ` Bjorn Helgaas
2019-10-22 9:07 ` Dilip Kota
2019-10-22 13:09 ` Bjorn Helgaas
2019-10-29 7:45 ` Dilip Kota
2019-10-25 13:11 ` kbuild test robot
2019-10-25 13:11 ` [RFC PATCH] dwc: PCI: intel: intel_pcie_msi_init() can be static kbuild test robot
2019-10-21 6:39 ` [PATCH v4 3/3] pci: intel: Add sysfs attributes to configure pcie link Dilip Kota
2019-10-21 8:40 ` Gustavo Pimentel [this message]
2019-10-21 10:34 ` Dilip Kota
2019-10-21 13:38 ` Andrew Murray
2019-10-21 17:18 ` Bjorn Helgaas
2019-10-22 9:27 ` Dilip Kota
2019-10-22 12:59 ` Bjorn Helgaas
2019-10-29 9:31 ` Dilip Kota
2019-10-30 22:14 ` Bjorn Helgaas
2019-10-30 23:31 ` Rafael J. Wysocki
2019-10-31 2:56 ` Bjorn Helgaas
2019-10-31 9:13 ` Rafael J. Wysocki
2019-10-31 13:01 ` Bjorn Helgaas
2019-10-31 10:47 ` Dilip Kota
2019-10-31 13:22 ` Bjorn Helgaas
2019-11-01 5:47 ` Dilip Kota
2019-11-01 11:30 ` Andrew Murray
2019-10-29 10:42 ` Rafael J. Wysocki
2019-10-29 12:36 ` Bjorn Helgaas
2019-10-22 9:20 ` Dilip Kota
2019-10-25 9:34 ` Andrew Murray
2019-10-29 9:51 ` Dilip Kota
2019-10-21 8:08 ` [PATCH v4 0/3] PCI: Add Intel PCIe Driver and respective dt-binding yaml file Gustavo Pimentel
2019-10-21 8:31 ` Dilip Kota
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CH2PR12MB400776877B54F866691CA201DA690@CH2PR12MB4007.namprd12.prod.outlook.com \
--to=gustavo.pimentel@synopsys.com \
--cc=andrew.murray@arm.com \
--cc=andriy.shevchenko@intel.com \
--cc=cheol.yong.kim@intel.com \
--cc=chuanhua.lei@linux.intel.com \
--cc=devicetree@vger.kernel.org \
--cc=eswara.kota@linux.intel.com \
--cc=hch@infradead.org \
--cc=jingoohan1@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=martin.blumenstingl@googlemail.com \
--cc=qi-ming.wu@intel.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).