Linux-PM Archive on lore.kernel.org
 help / color / Atom feed
WARNING: multiple messages refer to this Message-ID
From: Patrick Bellasi <patrick.bellasi@arm.com>
To: douglas.raillard@arm.com
Cc: linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
	mingo@redhat.com, peterz@infradead.org, quentin.perret@arm.com,
	dietmar.eggemann@arm.com
Subject: Re: [RFC PATCH 1/7] PM: Introduce em_pd_get_higher_freq()
Date: Thu, 16 May 2019 13:42:00 +0100
Message-ID: <20190516124200.opxczohjelhvrzmo@e110439-lin> (raw)
In-Reply-To: <20190508174301.4828-2-douglas.raillard@arm.com>

On 08-May 18:42, douglas.raillard@arm.com wrote:
> From: Douglas RAILLARD <douglas.raillard@arm.com>
> 
> em_pd_get_higher_freq() returns a frequency greater or equal to the
> provided one while taking into account a given cost margin. It also
> skips inefficient OPPs that have a higher cost than another one with a
> higher frequency.

It's worth to add a small description and definition of what we mean by
"OPP efficiency". Despite being just an RFC, it could help to better
understand what we are after.

[...]

> +/** + * em_pd_get_higher_freq() - Get the highest frequency that
> does not exceed the
> + * given cost margin compared to min_freq
> + * @pd		: performance domain for which this must be done
> + * @min_freq	: minimum frequency to return
> + * @cost_margin	: allowed margin compared to min_freq, as a per-1024 value.
                                                                    ^^^^^^^^
here...

> + *
> + * Return: the chosen frequency, guaranteed to be at least as high as min_freq.
> + */
> +static inline unsigned long em_pd_get_higher_freq(struct em_perf_domain *pd,
> +	unsigned long min_freq, unsigned long cost_margin)
> +{
> +	unsigned long max_cost = 0;
> +	struct em_cap_state *cs;
> +	int i;
> +
> +	if (!pd)
> +		return min_freq;
> +
> +	/* Compute the maximum allowed cost */
> +	for (i = 0; i < pd->nr_cap_states; i++) {
> +		cs = &pd->table[i];
> +		if (cs->frequency >= min_freq) {
> +			max_cost = cs->cost + (cs->cost * cost_margin) / 1024;
                                                                         ^^^^
... end here we should probably better use SCHED_CAPACITY_SCALE
instead of hard-coding in values, isn't it?

> +			break;
> +		}
> +	}
> +

[...]

Best,
Patrick

-- 
#include <best/regards.h>

Patrick Bellasi

From: Patrick Bellasi <patrick.bellasi@arm.com>
To: douglas.raillard@arm.com
Cc: linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
	mingo@redhat.com, peterz@infradead.org, quentin.perret@arm.com,
	dietmar.eggemann@arm.com
Subject: Re: [RFC PATCH 1/7] PM: Introduce em_pd_get_higher_freq()
Date: Thu, 16 May 2019 13:42:00 +0100
Message-ID: <20190516124200.opxczohjelhvrzmo@e110439-lin> (raw)
Message-ID: <20190516124200.gkC3D0YzCOXGdBQXmaovN0-N-uF8gHOEbnbhjOUkAHY@z> (raw)
In-Reply-To: <20190508174301.4828-2-douglas.raillard@arm.com>

On 08-May 18:42, douglas.raillard@arm.com wrote:
> From: Douglas RAILLARD <douglas.raillard@arm.com>
> 
> em_pd_get_higher_freq() returns a frequency greater or equal to the
> provided one while taking into account a given cost margin. It also
> skips inefficient OPPs that have a higher cost than another one with a
> higher frequency.

It's worth to add a small description and definition of what we mean by
"OPP efficiency". Despite being just an RFC, it could help to better
understand what we are after.

[...]

> +/** + * em_pd_get_higher_freq() - Get the highest frequency that
> does not exceed the
> + * given cost margin compared to min_freq
> + * @pd		: performance domain for which this must be done
> + * @min_freq	: minimum frequency to return
> + * @cost_margin	: allowed margin compared to min_freq, as a per-1024 value.
                                                                    ^^^^^^^^
here...

> + *
> + * Return: the chosen frequency, guaranteed to be at least as high as min_freq.
> + */
> +static inline unsigned long em_pd_get_higher_freq(struct em_perf_domain *pd,
> +	unsigned long min_freq, unsigned long cost_margin)
> +{
> +	unsigned long max_cost = 0;
> +	struct em_cap_state *cs;
> +	int i;
> +
> +	if (!pd)
> +		return min_freq;
> +
> +	/* Compute the maximum allowed cost */
> +	for (i = 0; i < pd->nr_cap_states; i++) {
> +		cs = &pd->table[i];
> +		if (cs->frequency >= min_freq) {
> +			max_cost = cs->cost + (cs->cost * cost_margin) / 1024;
                                                                         ^^^^
... end here we should probably better use SCHED_CAPACITY_SCALE
instead of hard-coding in values, isn't it?

> +			break;
> +		}
> +	}
> +

[...]

Best,
Patrick

-- 
#include <best/regards.h>

Patrick Bellasi

  parent reply index

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-08 17:42 [RFC PATCH 0/7] sched/cpufreq: Make schedutil energy aware douglas.raillard
2019-05-08 17:42 ` douglas.raillard
2019-05-08 17:42 ` [RFC PATCH 1/7] PM: Introduce em_pd_get_higher_freq() douglas.raillard
2019-05-08 17:42   ` douglas.raillard
2019-05-16 12:42   ` Patrick Bellasi [this message]
2019-05-16 12:42     ` Patrick Bellasi
2019-05-16 13:01     ` Quentin Perret
2019-05-16 13:01       ` Quentin Perret
2019-05-16 13:22       ` Patrick Bellasi
2019-05-16 13:22         ` Patrick Bellasi
2019-06-19 16:08         ` Douglas Raillard
2019-06-20 13:04           ` Patrick Bellasi
2019-06-21 10:17             ` Quentin Perret
2019-06-21 10:22               ` Quentin Perret
2019-05-16 13:06     ` Douglas Raillard
2019-05-16 13:06       ` Douglas Raillard
2019-05-08 17:42 ` [RFC PATCH 2/7] sched/cpufreq: Attach perf domain to sugov policy douglas.raillard
2019-05-08 17:42   ` douglas.raillard
2019-05-08 17:42 ` [RFC PATCH 3/7] sched/cpufreq: Hook em_pd_get_higher_power() into get_next_freq() douglas.raillard
2019-05-08 17:42   ` douglas.raillard
2019-05-08 17:42 ` [RFC PATCH 4/7] sched/cpufreq: Move up sugov_cpu_is_busy() douglas.raillard
2019-05-08 17:42   ` douglas.raillard
2019-05-08 17:42 ` [RFC PATCH 5/7] sched/cpufreq: sugov_cpu_is_busy for shared policy douglas.raillard
2019-05-08 17:42   ` douglas.raillard
2019-05-08 17:43 ` [RFC PATCH 6/7] sched/cpufreq: Improve sugov_cpu_is_busy accuracy douglas.raillard
2019-05-08 17:43   ` douglas.raillard
2019-05-16 12:55   ` Patrick Bellasi
2019-05-16 12:55     ` Patrick Bellasi
2019-06-19 16:19     ` Douglas Raillard
2019-06-20 11:05       ` Patrick Bellasi
2019-05-08 17:43 ` [RFC PATCH 7/7] sched/cpufreq: Boost schedutil frequency ramp up douglas.raillard
2019-05-08 17:43   ` douglas.raillard
2019-05-13  7:12 ` [RFC PATCH 0/7] sched/cpufreq: Make schedutil energy aware Viresh Kumar
2019-05-13  7:12   ` Viresh Kumar
2019-05-13 13:52   ` Douglas Raillard
2019-05-13 13:52     ` Douglas Raillard

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190516124200.opxczohjelhvrzmo@e110439-lin \
    --to=patrick.bellasi@arm.com \
    --cc=dietmar.eggemann@arm.com \
    --cc=douglas.raillard@arm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mingo@redhat.com \
    --cc=peterz@infradead.org \
    --cc=quentin.perret@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-PM Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-pm/0 linux-pm/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-pm linux-pm/ https://lore.kernel.org/linux-pm \
		linux-pm@vger.kernel.org linux-pm@archiver.kernel.org
	public-inbox-index linux-pm


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-pm


AGPL code for this site: git clone https://public-inbox.org/ public-inbox