From: Conor Dooley <conor@kernel.org>
To: linux-riscv@lists.infradead.org
Cc: palmer@dabbelt.com, damien.lemoal@opensource.wdc.com,
geert@linux-mk68.org, heiko@sntech.de, kernel@esmil.dk,
arnd@arndb.de, Conor Dooley <conor.dooley@microchip.com>
Subject: [RFC 08/27] clk: starfive: replace SOC_STARFIVE with ARCH_STARFIVE
Date: Fri, 23 Sep 2022 19:55:47 +0100 [thread overview]
Message-ID: <20220923185605.1900083-9-conor@kernel.org> (raw)
In-Reply-To: <20220923185605.1900083-1-conor@kernel.org>
From: Conor Dooley <conor.dooley@microchip.com>
At LPC we decided to replace the SOC_ symbols in arch/riscv with ARCH_
variants, for the sake of consistency between "incumbent" vendors and
those with legacy in other architectures. To that end, replace the
SOC_STARFIVE symbol with ARCH_STARFIVE.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
---
drivers/clk/Makefile | 2 +-
drivers/clk/starfive/Kconfig | 6 +++---
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index d5db170d38d2..c04628f8bb7d 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -116,7 +116,7 @@ obj-$(CONFIG_PLAT_SPEAR) += spear/
obj-y += sprd/
obj-$(CONFIG_ARCH_STI) += st/
obj-$(CONFIG_ARCH_STM32) += stm32/
-obj-$(CONFIG_SOC_STARFIVE) += starfive/
+obj-$(CONFIG_ARCH_STARFIVE) += starfive/
obj-$(CONFIG_ARCH_SUNXI) += sunxi/
obj-y += sunxi-ng/
obj-$(CONFIG_ARCH_TEGRA) += tegra/
diff --git a/drivers/clk/starfive/Kconfig b/drivers/clk/starfive/Kconfig
index 003bd2d56ce7..ef3517f4a276 100644
--- a/drivers/clk/starfive/Kconfig
+++ b/drivers/clk/starfive/Kconfig
@@ -2,8 +2,8 @@
config CLK_STARFIVE_JH7100
bool "StarFive JH7100 clock support"
- depends on SOC_STARFIVE || COMPILE_TEST
- default SOC_STARFIVE
+ depends on ARCH_STARFIVE || COMPILE_TEST
+ default ARCH_STARFIVE
help
Say yes here to support the clock controller on the StarFive JH7100
SoC.
@@ -11,7 +11,7 @@ config CLK_STARFIVE_JH7100
config CLK_STARFIVE_JH7100_AUDIO
tristate "StarFive JH7100 audio clock support"
depends on CLK_STARFIVE_JH7100
- default m if SOC_STARFIVE
+ default m if ARCH_STARFIVE
help
Say Y or M here to support the audio clocks on the StarFive JH7100
SoC.
--
2.37.3
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2022-09-23 18:57 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-23 18:55 [RFC 00/27] RISC-V: Convert SOC_FOO symbols to ARCH_FOO Conor Dooley
2022-09-23 18:55 ` [RFC 01/27] clk: microchip: replace SOC_MICROCHIP_POLARFIRE with ARCH_MICROCHIP Conor Dooley
2022-09-28 12:16 ` Christoph Hellwig
2022-09-28 12:51 ` Conor Dooley
2022-09-23 18:55 ` [RFC 02/27] i2c: microchip-corei2c: " Conor Dooley
2022-09-23 18:55 ` [RFC 03/27] mailbox: mpfs: " Conor Dooley
2022-09-23 18:55 ` [RFC 04/27] usb: musb: " Conor Dooley
2022-09-23 18:55 ` [RFC 05/27] rtc: " Conor Dooley
2022-09-23 18:55 ` [RFC 06/27] riscv: stop selecting the PolarFire SoC clock driver Conor Dooley
2022-09-23 18:55 ` [RFC 07/27] riscv: replace SOC_STARFIVE with ARCH_STARFIVE Conor Dooley
2022-09-23 19:09 ` Heiko Stuebner
2022-09-23 19:14 ` Conor Dooley
2022-09-23 19:20 ` Heiko Stuebner
2022-09-23 19:22 ` Conor Dooley
2022-09-23 18:55 ` Conor Dooley [this message]
2022-09-23 18:55 ` [RFC 09/27] pinctrl: starfive: " Conor Dooley
2022-09-23 18:55 ` [RFC 10/27] reset: " Conor Dooley
2022-09-23 18:55 ` [RFC 11/27] riscv: replace SOC_SIFIVE with ARCH_SIFIVE Conor Dooley
2022-09-23 18:55 ` [RFC 12/27] soc: sifive: convert SOC_SIFIVE to ARCH_SIFIVE Conor Dooley
2022-09-23 18:55 ` [RFC 13/27] clk: " Conor Dooley
2022-09-23 18:55 ` [RFC 14/27] clk: sifive: select by default if ARCH_SIFIVE Conor Dooley
2022-09-23 18:55 ` [RFC 15/27] serial: " Conor Dooley
2022-09-23 18:55 ` [RFC 16/27] PCI: dwc: fu740: convert SOC_SIFIVE to ARCH_SIFIVE Conor Dooley
2022-09-23 18:55 ` [RFC 17/27] riscv: stop selecting SiFive clock and serial drivers directly Conor Dooley
2022-09-23 18:55 ` [RFC 18/27] riscv: convert SOC_VIRT to ARCH_VIRT Conor Dooley
2022-09-23 18:55 ` [RFC 19/27] kunit: tool: rename SOC_VIRT to ARCH_VIRT in riscv's QEMU config Conor Dooley
2022-09-23 18:55 ` [RFC 20/27] wireguard: selftests: swap SOC_VIRT for ARCH_VIRT on riscv Conor Dooley
2022-09-24 10:03 ` Jason A. Donenfeld
2022-09-23 18:56 ` [RFC 21/27] riscv: convert SOC_CANAAN to ARCH_CANAAN Conor Dooley
2022-09-23 18:56 ` [RFC 22/27] clk: k210: " Conor Dooley
2022-09-23 18:56 ` [RFC 23/27] pinctrl: " Conor Dooley
2022-09-23 18:56 ` [RFC 24/27] soc: " Conor Dooley
2022-09-23 18:56 ` [RFC 25/27] reset: " Conor Dooley
2022-09-23 18:56 ` [RFC 26/27] serial: sifive: select by default if ARCH_CANAAN Conor Dooley
2022-09-23 18:56 ` [RFC 27/27] riscv: stop directly selecting drivers for ARCH_CANAAN Conor Dooley
2022-09-23 18:59 ` [RFC 00/27] RISC-V: Convert SOC_FOO symbols to ARCH_FOO Conor Dooley
2022-09-26 1:50 ` Damien Le Moal
2022-09-26 8:02 ` Conor Dooley
2022-09-26 9:04 ` Geert Uytterhoeven
2022-09-27 6:34 ` Conor Dooley
2022-09-27 6:48 ` Arnd Bergmann
2022-09-27 6:57 ` Conor Dooley
2022-09-27 7:03 ` Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220923185605.1900083-9-conor@kernel.org \
--to=conor@kernel.org \
--cc=arnd@arndb.de \
--cc=conor.dooley@microchip.com \
--cc=damien.lemoal@opensource.wdc.com \
--cc=geert@linux-mk68.org \
--cc=heiko@sntech.de \
--cc=kernel@esmil.dk \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@dabbelt.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).