From: Hal Feng <hal.feng@starfivetech.com>
To: <linux-clk@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-riscv@lists.infradead.org>
Cc: Stephen Boyd <sboyd@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
"Rob Herring" <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor@kernel.org>,
"Palmer Dabbelt" <palmer@dabbelt.com>,
Paul Walmsley <paul.walmsley@sifive.com>,
Albert Ou <aou@eecs.berkeley.edu>,
Ben Dooks <ben.dooks@sifive.com>,
"Daniel Lezcano" <daniel.lezcano@linaro.org>,
Thomas Gleixner <tglx@linutronix.de>,
Marc Zyngier <maz@kernel.org>,
Emil Renner Berthing <emil.renner.berthing@canonical.com>,
Hal Feng <hal.feng@starfivetech.com>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH v6 20/21] riscv: dts: starfive: Add StarFive JH7110 pin function definitions
Date: Mon, 20 Mar 2023 18:37:49 +0800 [thread overview]
Message-ID: <20230320103750.60295-21-hal.feng@starfivetech.com> (raw)
In-Reply-To: <20230320103750.60295-1-hal.feng@starfivetech.com>
From: Jianlong Huang <jianlong.huang@starfivetech.com>
Add pin function definitions for StarFive JH7110 SoC.
Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Co-developed-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
arch/riscv/boot/dts/starfive/jh7110-pinfunc.h | 308 ++++++++++++++++++
1 file changed, 308 insertions(+)
create mode 100644 arch/riscv/boot/dts/starfive/jh7110-pinfunc.h
diff --git a/arch/riscv/boot/dts/starfive/jh7110-pinfunc.h b/arch/riscv/boot/dts/starfive/jh7110-pinfunc.h
new file mode 100644
index 000000000000..fb0139b56723
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7110-pinfunc.h
@@ -0,0 +1,308 @@
+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
+/*
+ * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk>
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ */
+
+#ifndef __JH7110_PINFUNC_H__
+#define __JH7110_PINFUNC_H__
+
+/*
+ * mux bits:
+ * | 31 - 24 | 23 - 16 | 15 - 10 | 9 - 8 | 7 - 0 |
+ * | din | dout | doen | function | gpio nr |
+ *
+ * dout: output signal
+ * doen: output enable signal
+ * din: optional input signal, 0xff = none
+ * function: function selector
+ * gpio nr: gpio number, 0 - 63
+ */
+#define GPIOMUX(n, dout, doen, din) ( \
+ (((din) & 0xff) << 24) | \
+ (((dout) & 0xff) << 16) | \
+ (((doen) & 0x3f) << 10) | \
+ ((n) & 0x3f))
+
+#define PINMUX(n, func) ((1 << 10) | (((func) & 0x3) << 8) | ((n) & 0xff))
+
+/* sys_iomux dout */
+#define GPOUT_LOW 0
+#define GPOUT_HIGH 1
+#define GPOUT_SYS_WAVE511_UART_TX 2
+#define GPOUT_SYS_CAN0_STBY 3
+#define GPOUT_SYS_CAN0_TST_NEXT_BIT 4
+#define GPOUT_SYS_CAN0_TST_SAMPLE_POINT 5
+#define GPOUT_SYS_CAN0_TXD 6
+#define GPOUT_SYS_USB_DRIVE_VBUS 7
+#define GPOUT_SYS_QSPI_CS1 8
+#define GPOUT_SYS_SPDIF 9
+#define GPOUT_SYS_HDMI_CEC_SDA 10
+#define GPOUT_SYS_HDMI_DDC_SCL 11
+#define GPOUT_SYS_HDMI_DDC_SDA 12
+#define GPOUT_SYS_WATCHDOG 13
+#define GPOUT_SYS_I2C0_CLK 14
+#define GPOUT_SYS_I2C0_DATA 15
+#define GPOUT_SYS_SDIO0_BACK_END_POWER 16
+#define GPOUT_SYS_SDIO0_CARD_POWER_EN 17
+#define GPOUT_SYS_SDIO0_CCMD_OD_PULLUP_EN 18
+#define GPOUT_SYS_SDIO0_RST 19
+#define GPOUT_SYS_UART0_TX 20
+#define GPOUT_SYS_HIFI4_JTAG_TDO 21
+#define GPOUT_SYS_JTAG_TDO 22
+#define GPOUT_SYS_PDM_MCLK 23
+#define GPOUT_SYS_PWM_CHANNEL0 24
+#define GPOUT_SYS_PWM_CHANNEL1 25
+#define GPOUT_SYS_PWM_CHANNEL2 26
+#define GPOUT_SYS_PWM_CHANNEL3 27
+#define GPOUT_SYS_PWMDAC_LEFT 28
+#define GPOUT_SYS_PWMDAC_RIGHT 29
+#define GPOUT_SYS_SPI0_CLK 30
+#define GPOUT_SYS_SPI0_FSS 31
+#define GPOUT_SYS_SPI0_TXD 32
+#define GPOUT_SYS_GMAC_PHYCLK 33
+#define GPOUT_SYS_I2SRX_BCLK 34
+#define GPOUT_SYS_I2SRX_LRCK 35
+#define GPOUT_SYS_I2STX0_BCLK 36
+#define GPOUT_SYS_I2STX0_LRCK 37
+#define GPOUT_SYS_MCLK 38
+#define GPOUT_SYS_TDM_CLK 39
+#define GPOUT_SYS_TDM_SYNC 40
+#define GPOUT_SYS_TDM_TXD 41
+#define GPOUT_SYS_TRACE_DATA0 42
+#define GPOUT_SYS_TRACE_DATA1 43
+#define GPOUT_SYS_TRACE_DATA2 44
+#define GPOUT_SYS_TRACE_DATA3 45
+#define GPOUT_SYS_TRACE_REF 46
+#define GPOUT_SYS_CAN1_STBY 47
+#define GPOUT_SYS_CAN1_TST_NEXT_BIT 48
+#define GPOUT_SYS_CAN1_TST_SAMPLE_POINT 49
+#define GPOUT_SYS_CAN1_TXD 50
+#define GPOUT_SYS_I2C1_CLK 51
+#define GPOUT_SYS_I2C1_DATA 52
+#define GPOUT_SYS_SDIO1_BACK_END_POWER 53
+#define GPOUT_SYS_SDIO1_CARD_POWER_EN 54
+#define GPOUT_SYS_SDIO1_CLK 55
+#define GPOUT_SYS_SDIO1_CMD_OD_PULLUP_EN 56
+#define GPOUT_SYS_SDIO1_CMD 57
+#define GPOUT_SYS_SDIO1_DATA0 58
+#define GPOUT_SYS_SDIO1_DATA1 59
+#define GPOUT_SYS_SDIO1_DATA2 60
+#define GPOUT_SYS_SDIO1_DATA3 61
+#define GPOUT_SYS_SDIO1_DATA4 63
+#define GPOUT_SYS_SDIO1_DATA5 63
+#define GPOUT_SYS_SDIO1_DATA6 64
+#define GPOUT_SYS_SDIO1_DATA7 65
+#define GPOUT_SYS_SDIO1_RST 66
+#define GPOUT_SYS_UART1_RTS 67
+#define GPOUT_SYS_UART1_TX 68
+#define GPOUT_SYS_I2STX1_SDO0 69
+#define GPOUT_SYS_I2STX1_SDO1 70
+#define GPOUT_SYS_I2STX1_SDO2 71
+#define GPOUT_SYS_I2STX1_SDO3 72
+#define GPOUT_SYS_SPI1_CLK 73
+#define GPOUT_SYS_SPI1_FSS 74
+#define GPOUT_SYS_SPI1_TXD 75
+#define GPOUT_SYS_I2C2_CLK 76
+#define GPOUT_SYS_I2C2_DATA 77
+#define GPOUT_SYS_UART2_RTS 78
+#define GPOUT_SYS_UART2_TX 79
+#define GPOUT_SYS_SPI2_CLK 80
+#define GPOUT_SYS_SPI2_FSS 81
+#define GPOUT_SYS_SPI2_TXD 82
+#define GPOUT_SYS_I2C3_CLK 83
+#define GPOUT_SYS_I2C3_DATA 84
+#define GPOUT_SYS_UART3_TX 85
+#define GPOUT_SYS_SPI3_CLK 86
+#define GPOUT_SYS_SPI3_FSS 87
+#define GPOUT_SYS_SPI3_TXD 88
+#define GPOUT_SYS_I2C4_CLK 89
+#define GPOUT_SYS_I2C4_DATA 90
+#define GPOUT_SYS_UART4_RTS 91
+#define GPOUT_SYS_UART4_TX 92
+#define GPOUT_SYS_SPI4_CLK 93
+#define GPOUT_SYS_SPI4_FSS 94
+#define GPOUT_SYS_SPI4_TXD 95
+#define GPOUT_SYS_I2C5_CLK 96
+#define GPOUT_SYS_I2C5_DATA 97
+#define GPOUT_SYS_UART5_RTS 98
+#define GPOUT_SYS_UART5_TX 99
+#define GPOUT_SYS_SPI5_CLK 100
+#define GPOUT_SYS_SPI5_FSS 101
+#define GPOUT_SYS_SPI5_TXD 102
+#define GPOUT_SYS_I2C6_CLK 103
+#define GPOUT_SYS_I2C6_DATA 104
+#define GPOUT_SYS_SPI6_CLK 105
+#define GPOUT_SYS_SPI6_FSS 106
+#define GPOUT_SYS_SPI6_TXD 107
+
+/* aon_iomux dout */
+#define GPOUT_AON_CLK_32K_OUT 2
+#define GPOUT_AON_PTC0_PWM4 3
+#define GPOUT_AON_PTC0_PWM5 4
+#define GPOUT_AON_PTC0_PWM6 5
+#define GPOUT_AON_PTC0_PWM7 6
+#define GPOUT_AON_CLK_GCLK0 7
+#define GPOUT_AON_CLK_GCLK1 8
+#define GPOUT_AON_CLK_GCLK2 9
+
+/* sys_iomux doen */
+#define GPOEN_ENABLE 0
+#define GPOEN_DISABLE 1
+#define GPOEN_SYS_HDMI_CEC_SDA 2
+#define GPOEN_SYS_HDMI_DDC_SCL 3
+#define GPOEN_SYS_HDMI_DDC_SDA 4
+#define GPOEN_SYS_I2C0_CLK 5
+#define GPOEN_SYS_I2C0_DATA 6
+#define GPOEN_SYS_HIFI4_JTAG_TDO 7
+#define GPOEN_SYS_JTAG_TDO 8
+#define GPOEN_SYS_PWM0_CHANNEL0 9
+#define GPOEN_SYS_PWM0_CHANNEL1 10
+#define GPOEN_SYS_PWM0_CHANNEL2 11
+#define GPOEN_SYS_PWM0_CHANNEL3 12
+#define GPOEN_SYS_SPI0_NSSPCTL 13
+#define GPOEN_SYS_SPI0_NSSP 14
+#define GPOEN_SYS_TDM_SYNC 15
+#define GPOEN_SYS_TDM_TXD 16
+#define GPOEN_SYS_I2C1_CLK 17
+#define GPOEN_SYS_I2C1_DATA 18
+#define GPOEN_SYS_SDIO1_CMD 19
+#define GPOEN_SYS_SDIO1_DATA0 20
+#define GPOEN_SYS_SDIO1_DATA1 21
+#define GPOEN_SYS_SDIO1_DATA2 22
+#define GPOEN_SYS_SDIO1_DATA3 23
+#define GPOEN_SYS_SDIO1_DATA4 24
+#define GPOEN_SYS_SDIO1_DATA5 25
+#define GPOEN_SYS_SDIO1_DATA6 26
+#define GPOEN_SYS_SDIO1_DATA7 27
+#define GPOEN_SYS_SPI1_NSSPCTL 28
+#define GPOEN_SYS_SPI1_NSSP 29
+#define GPOEN_SYS_I2C2_CLK 30
+#define GPOEN_SYS_I2C2_DATA 31
+#define GPOEN_SYS_SPI2_NSSPCTL 32
+#define GPOEN_SYS_SPI2_NSSP 33
+#define GPOEN_SYS_I2C3_CLK 34
+#define GPOEN_SYS_I2C3_DATA 35
+#define GPOEN_SYS_SPI3_NSSPCTL 36
+#define GPOEN_SYS_SPI3_NSSP 37
+#define GPOEN_SYS_I2C4_CLK 38
+#define GPOEN_SYS_I2C4_DATA 39
+#define GPOEN_SYS_SPI4_NSSPCTL 40
+#define GPOEN_SYS_SPI4_NSSP 41
+#define GPOEN_SYS_I2C5_CLK 42
+#define GPOEN_SYS_I2C5_DATA 43
+#define GPOEN_SYS_SPI5_NSSPCTL 44
+#define GPOEN_SYS_SPI5_NSSP 45
+#define GPOEN_SYS_I2C6_CLK 46
+#define GPOEN_SYS_I2C6_DATA 47
+#define GPOEN_SYS_SPI6_NSSPCTL 48
+#define GPOEN_SYS_SPI6_NSSP 49
+
+/* aon_iomux doen */
+#define GPOEN_AON_PTC0_OE_N_4 2
+#define GPOEN_AON_PTC0_OE_N_5 3
+#define GPOEN_AON_PTC0_OE_N_6 4
+#define GPOEN_AON_PTC0_OE_N_7 5
+
+/* sys_iomux gin */
+#define GPI_NONE 255
+
+#define GPI_SYS_WAVE511_UART_RX 0
+#define GPI_SYS_CAN0_RXD 1
+#define GPI_SYS_USB_OVERCURRENT 2
+#define GPI_SYS_SPDIF 3
+#define GPI_SYS_JTAG_RST 4
+#define GPI_SYS_HDMI_CEC_SDA 5
+#define GPI_SYS_HDMI_DDC_SCL 6
+#define GPI_SYS_HDMI_DDC_SDA 7
+#define GPI_SYS_HDMI_HPD 8
+#define GPI_SYS_I2C0_CLK 9
+#define GPI_SYS_I2C0_DATA 10
+#define GPI_SYS_SDIO0_CD 11
+#define GPI_SYS_SDIO0_INT 12
+#define GPI_SYS_SDIO0_WP 13
+#define GPI_SYS_UART0_RX 14
+#define GPI_SYS_HIFI4_JTAG_TCK 15
+#define GPI_SYS_HIFI4_JTAG_TDI 16
+#define GPI_SYS_HIFI4_JTAG_TMS 17
+#define GPI_SYS_HIFI4_JTAG_RST 18
+#define GPI_SYS_JTAG_TDI 19
+#define GPI_SYS_JTAG_TMS 20
+#define GPI_SYS_PDM_DMIC0 21
+#define GPI_SYS_PDM_DMIC1 22
+#define GPI_SYS_I2SRX_SDIN0 23
+#define GPI_SYS_I2SRX_SDIN1 24
+#define GPI_SYS_I2SRX_SDIN2 25
+#define GPI_SYS_SPI0_CLK 26
+#define GPI_SYS_SPI0_FSS 27
+#define GPI_SYS_SPI0_RXD 28
+#define GPI_SYS_JTAG_TCK 29
+#define GPI_SYS_MCLK_EXT 30
+#define GPI_SYS_I2SRX_BCLK 31
+#define GPI_SYS_I2SRX_LRCK 32
+#define GPI_SYS_I2STX0_BCLK 33
+#define GPI_SYS_I2STX0_LRCK 34
+#define GPI_SYS_TDM_CLK 35
+#define GPI_SYS_TDM_RXD 36
+#define GPI_SYS_TDM_SYNC 37
+#define GPI_SYS_CAN1_RXD 38
+#define GPI_SYS_I2C1_CLK 39
+#define GPI_SYS_I2C1_DATA 40
+#define GPI_SYS_SDIO1_CD 41
+#define GPI_SYS_SDIO1_INT 42
+#define GPI_SYS_SDIO1_WP 43
+#define GPI_SYS_SDIO1_CMD 44
+#define GPI_SYS_SDIO1_DATA0 45
+#define GPI_SYS_SDIO1_DATA1 46
+#define GPI_SYS_SDIO1_DATA2 47
+#define GPI_SYS_SDIO1_DATA3 48
+#define GPI_SYS_SDIO1_DATA4 49
+#define GPI_SYS_SDIO1_DATA5 50
+#define GPI_SYS_SDIO1_DATA6 51
+#define GPI_SYS_SDIO1_DATA7 52
+#define GPI_SYS_SDIO1_STRB 53
+#define GPI_SYS_UART1_CTS 54
+#define GPI_SYS_UART1_RX 55
+#define GPI_SYS_SPI1_CLK 56
+#define GPI_SYS_SPI1_FSS 57
+#define GPI_SYS_SPI1_RXD 58
+#define GPI_SYS_I2C2_CLK 59
+#define GPI_SYS_I2C2_DATA 60
+#define GPI_SYS_UART2_CTS 61
+#define GPI_SYS_UART2_RX 62
+#define GPI_SYS_SPI2_CLK 63
+#define GPI_SYS_SPI2_FSS 64
+#define GPI_SYS_SPI2_RXD 65
+#define GPI_SYS_I2C3_CLK 66
+#define GPI_SYS_I2C3_DATA 67
+#define GPI_SYS_UART3_RX 68
+#define GPI_SYS_SPI3_CLK 69
+#define GPI_SYS_SPI3_FSS 70
+#define GPI_SYS_SPI3_RXD 71
+#define GPI_SYS_I2C4_CLK 72
+#define GPI_SYS_I2C4_DATA 73
+#define GPI_SYS_UART4_CTS 74
+#define GPI_SYS_UART4_RX 75
+#define GPI_SYS_SPI4_CLK 76
+#define GPI_SYS_SPI4_FSS 77
+#define GPI_SYS_SPI4_RXD 78
+#define GPI_SYS_I2C5_CLK 79
+#define GPI_SYS_I2C5_DATA 80
+#define GPI_SYS_UART5_CTS 81
+#define GPI_SYS_UART5_RX 82
+#define GPI_SYS_SPI5_CLK 83
+#define GPI_SYS_SPI5_FSS 84
+#define GPI_SYS_SPI5_RXD 85
+#define GPI_SYS_I2C6_CLK 86
+#define GPI_SYS_I2C6_DATA 87
+#define GPI_SYS_SPI6_CLK 88
+#define GPI_SYS_SPI6_FSS 89
+#define GPI_SYS_SPI6_RXD 90
+
+/* aon_iomux gin */
+#define GPI_AON_PMU_GPIO_WAKEUP_0 0
+#define GPI_AON_PMU_GPIO_WAKEUP_1 1
+#define GPI_AON_PMU_GPIO_WAKEUP_2 2
+#define GPI_AON_PMU_GPIO_WAKEUP_3 3
+
+#endif
--
2.38.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2023-03-20 10:38 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-20 10:37 [PATCH v6 00/21] Basic clock, reset & device tree support for StarFive JH7110 RISC-V SoC Hal Feng
2023-03-20 10:37 ` [PATCH v6 01/21] clk: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE Hal Feng
2023-03-20 10:37 ` [PATCH v6 02/21] clk: starfive: Factor out common JH7100 and JH7110 code Hal Feng
2023-03-20 10:37 ` [PATCH v6 03/21] clk: starfive: Rename clk-starfive-jh7100.h to clk-starfive-jh71x0.h Hal Feng
2023-03-20 10:37 ` [PATCH v6 04/21] clk: starfive: Rename "jh7100" to "jh71x0" for the common code Hal Feng
2023-03-20 10:37 ` [PATCH v6 05/21] reset: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE Hal Feng
2023-03-20 10:37 ` [PATCH v6 06/21] reset: Create subdirectory for StarFive drivers Hal Feng
2023-03-20 10:37 ` [PATCH v6 07/21] reset: starfive: Factor out common JH71X0 reset code Hal Feng
2023-03-20 10:37 ` [PATCH v6 08/21] reset: starfive: Extract the " Hal Feng
2023-03-20 10:37 ` [PATCH v6 09/21] reset: starfive: Rename "jh7100" to "jh71x0" for the common code Hal Feng
2023-03-20 10:37 ` [PATCH v6 10/21] reset: starfive: jh71x0: Use 32bit I/O on 32bit registers Hal Feng
2023-03-20 10:37 ` [PATCH v6 11/21] dt-bindings: clock: Add StarFive JH7110 system clock and reset generator Hal Feng
2023-03-22 21:53 ` Conor Dooley
2023-03-22 23:57 ` Stephen Boyd
2023-03-23 7:44 ` Hal Feng
2023-03-23 9:01 ` Conor Dooley
2023-03-24 9:39 ` Emil Renner Berthing
2023-03-25 14:26 ` Hal Feng
2023-03-20 10:37 ` [PATCH v6 12/21] dt-bindings: clock: Add StarFive JH7110 always-on " Hal Feng
2023-03-20 10:37 ` [PATCH v6 13/21] clk: starfive: Add StarFive JH7110 system clock driver Hal Feng
2023-03-24 14:39 ` Emil Renner Berthing
2023-03-25 15:54 ` Hal Feng
2023-03-26 20:06 ` Emil Renner Berthing
2023-03-26 20:13 ` Emil Renner Berthing
2023-03-27 18:51 ` Stephen Boyd
2023-03-27 23:08 ` Emil Renner Berthing
2023-03-20 10:37 ` [PATCH v6 14/21] clk: starfive: Add StarFive JH7110 always-on " Hal Feng
2023-03-20 10:37 ` [PATCH v6 15/21] reset: starfive: Add StarFive JH7110 reset driver Hal Feng
2023-03-20 10:37 ` [PATCH v6 16/21] dt-bindings: timer: Add StarFive JH7110 clint Hal Feng
2023-03-20 10:37 ` [PATCH v6 17/21] dt-bindings: interrupt-controller: Add StarFive JH7110 plic Hal Feng
2023-03-20 10:37 ` [PATCH v6 18/21] dt-bindings: riscv: Add SiFive S7 compatible Hal Feng
2023-03-20 10:37 ` [PATCH v6 19/21] riscv: dts: starfive: Add initial StarFive JH7110 device tree Hal Feng
2023-03-22 22:02 ` Conor Dooley
2023-03-23 9:03 ` Conor Dooley
2023-03-24 7:03 ` Hal Feng
2023-03-20 10:37 ` Hal Feng [this message]
2023-03-20 10:37 ` [PATCH v6 21/21] riscv: dts: starfive: Add StarFive JH7110 VisionFive 2 board " Hal Feng
2023-03-21 23:03 ` [PATCH v6 00/21] Basic clock, reset & device tree support for StarFive JH7110 RISC-V SoC Conor Dooley
2023-03-21 23:57 ` Stephen Boyd
2023-03-22 21:06 ` Conor Dooley
2023-03-22 23:53 ` Stephen Boyd
2023-03-27 22:50 ` Conor Dooley
2023-03-28 1:42 ` Hal Feng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230320103750.60295-21-hal.feng@starfivetech.com \
--to=hal.feng@starfivetech.com \
--cc=aou@eecs.berkeley.edu \
--cc=ben.dooks@sifive.com \
--cc=conor@kernel.org \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=emil.renner.berthing@canonical.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=maz@kernel.org \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).