* [PATCH v2 0/2] Fix binfmt_flat loader for RISC-V @ 2021-04-07 15:49 Damien Le Moal 2021-04-07 15:49 ` [PATCH v2 1/2] binfmt_flat: allow not offsetting data start Damien Le Moal ` (2 more replies) 0 siblings, 3 replies; 10+ messages in thread From: Damien Le Moal @ 2021-04-07 15:49 UTC (permalink / raw) To: Palmer Dabbelt, linux-riscv, Alexander Viro, linux-kernel Cc: Max Filippov, Greg Ungerer, Anup Patel, Christoph Hellwig RISC-V NOMMU flat binaries cannot tolerate a gap between the text and data section as the toolchain fully resolves at compile time the PC relative global pointer (__global_pointer$ value loaded in gp register). Without a relocation entry provided, the flat bin loader cannot fix the value if a gap is introduced and executables fail to run. This series fixes this problem by allowing an architecture to request the flat loader to suppress the gap between the text and data sections. The first patch fixes binfmt_flat flat_load_file() using the new configuration option CONFIG_BINFMT_FLAT_NO_TEXT_DATA_GAP. The second patch enables this option for RISCV NOMMU builds. These patches do not change the binfmt_flat loader behavior for other architectures. Changes from v1: * Replace FLAT_TEXT_DATA_NO_GAP macro with CONFIG_BINFMT_FLAT_NO_TEXT_DATA_GAP config option (patch 1). * Remove the addition of riscv/include/asm/flat.h and set CONFIG_BINFMT_FLAT_NO_TEXT_DATA_GAP for RISCV and !MMU Damien Le Moal (2): binfmt_flat: allow not offsetting data start riscv: Disable text-data gap in flat binaries arch/riscv/Kconfig | 1 + fs/Kconfig.binfmt | 3 +++ fs/binfmt_flat.c | 21 +++++++++++++++------ 3 files changed, 19 insertions(+), 6 deletions(-) -- 2.30.2 _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v2 1/2] binfmt_flat: allow not offsetting data start 2021-04-07 15:49 [PATCH v2 0/2] Fix binfmt_flat loader for RISC-V Damien Le Moal @ 2021-04-07 15:49 ` Damien Le Moal 2021-04-07 15:49 ` [PATCH v2 2/2] riscv: Disable text-data gap in flat binaries Damien Le Moal 2021-04-15 0:32 ` [PATCH v2 0/2] Fix binfmt_flat loader for RISC-V Damien Le Moal 2 siblings, 0 replies; 10+ messages in thread From: Damien Le Moal @ 2021-04-07 15:49 UTC (permalink / raw) To: Palmer Dabbelt, linux-riscv, Alexander Viro, linux-kernel Cc: Max Filippov, Greg Ungerer, Anup Patel, Christoph Hellwig Commit 2217b9826246 ("binfmt_flat: revert "binfmt_flat: don't offset the data start"") restored offsetting the start of the data section by a number of words defined by MAX_SHARED_LIBS. As a result, since MAX_SHARED_LIBS is never 0, a gap between the text and data sections always exists. For architectures which cannot support a such gap between the text and data sections (e.g. riscv nommu), flat binary programs cannot be executed. To allow an architecture to request contiguous text and data sections, introduce the config option CONFIG_BINFMT_FLAT_NO_TEXT_DATA_GAP. Using this new option, the macro DATA_GAP_WORDS is conditionally defined in binfmt_flat.c to MAX_SHARED_LIBS for architectures tolerating the text-to-data gap (CONFIG_BINFMT_FLAT_NO_TEXT_DATA_GAP disabled case) and to 0 when CONFIG_BINFMT_FLAT_NO_TEXT_DATA_GAP is enabled. DATA_GAP_WORDS is used in load_flat_file() to calculate the data section length and start position. An architecture enabling CONFIG_BINFMT_FLAT_NO_TEXT_DATA_GAP also prevents the use of the separate text/data load case (when the flat file header flags FLAT_FLAG_RAM and FLAT_FLAG_GZIP are not set with NOMMU kernels) and forces the use of a single RAM region for loading (equivalent to FLAT_FLAG_RAM being set). Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> --- fs/Kconfig.binfmt | 3 +++ fs/binfmt_flat.c | 21 +++++++++++++++------ 2 files changed, 18 insertions(+), 6 deletions(-) diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt index c6f1c8c1934e..c6df931d5d45 100644 --- a/fs/Kconfig.binfmt +++ b/fs/Kconfig.binfmt @@ -112,6 +112,9 @@ config BINFMT_FLAT_ARGVP_ENVP_ON_STACK config BINFMT_FLAT_OLD_ALWAYS_RAM bool +config BINFMT_FLAT_NO_TEXT_DATA_GAP + bool + config BINFMT_FLAT_OLD bool "Enable support for very old legacy flat binaries" depends on BINFMT_FLAT diff --git a/fs/binfmt_flat.c b/fs/binfmt_flat.c index b9c658e0548e..2be29bb964b8 100644 --- a/fs/binfmt_flat.c +++ b/fs/binfmt_flat.c @@ -74,6 +74,12 @@ #define MAX_SHARED_LIBS (1) #endif +#ifdef CONFIG_BINFMT_FLAT_NO_TEXT_DATA_GAP +#define DATA_GAP_WORDS (0) +#else +#define DATA_GAP_WORDS (MAX_SHARED_LIBS) +#endif + struct lib_info { struct { unsigned long start_code; /* Start of text segment */ @@ -559,7 +565,10 @@ static int load_flat_file(struct linux_binprm *bprm, * case, and then the fully copied to RAM case which lumps * it all together. */ - if (!IS_ENABLED(CONFIG_MMU) && !(flags & (FLAT_FLAG_RAM|FLAT_FLAG_GZIP))) { + if (!IS_ENABLED(CONFIG_MMU) && + !IS_ENABLED(CONFIG_BINFMT_FLAT_NO_TEXT_DATA_GAP) && + !(flags & (FLAT_FLAG_RAM|FLAT_FLAG_GZIP))) { + /* * this should give us a ROM ptr, but if it doesn't we don't * really care @@ -576,7 +585,7 @@ static int load_flat_file(struct linux_binprm *bprm, goto err; } - len = data_len + extra + MAX_SHARED_LIBS * sizeof(unsigned long); + len = data_len + extra + DATA_GAP_WORDS * sizeof(unsigned long); len = PAGE_ALIGN(len); realdatastart = vm_mmap(NULL, 0, len, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE, 0); @@ -591,7 +600,7 @@ static int load_flat_file(struct linux_binprm *bprm, goto err; } datapos = ALIGN(realdatastart + - MAX_SHARED_LIBS * sizeof(unsigned long), + DATA_GAP_WORDS * sizeof(unsigned long), FLAT_DATA_ALIGN); pr_debug("Allocated data+bss+stack (%u bytes): %lx\n", @@ -622,7 +631,7 @@ static int load_flat_file(struct linux_binprm *bprm, memp_size = len; } else { - len = text_len + data_len + extra + MAX_SHARED_LIBS * sizeof(u32); + len = text_len + data_len + extra + DATA_GAP_WORDS * sizeof(u32); len = PAGE_ALIGN(len); textpos = vm_mmap(NULL, 0, len, PROT_READ | PROT_EXEC | PROT_WRITE, MAP_PRIVATE, 0); @@ -638,7 +647,7 @@ static int load_flat_file(struct linux_binprm *bprm, realdatastart = textpos + ntohl(hdr->data_start); datapos = ALIGN(realdatastart + - MAX_SHARED_LIBS * sizeof(u32), + DATA_GAP_WORDS * sizeof(u32), FLAT_DATA_ALIGN); reloc = (__be32 __user *) @@ -714,7 +723,7 @@ static int load_flat_file(struct linux_binprm *bprm, ret = result; pr_err("Unable to read code+data+bss, errno %d\n", ret); vm_munmap(textpos, text_len + data_len + extra + - MAX_SHARED_LIBS * sizeof(u32)); + DATA_GAP_WORDS * sizeof(u32)); goto err; } } -- 2.30.2 _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v2 2/2] riscv: Disable text-data gap in flat binaries 2021-04-07 15:49 [PATCH v2 0/2] Fix binfmt_flat loader for RISC-V Damien Le Moal 2021-04-07 15:49 ` [PATCH v2 1/2] binfmt_flat: allow not offsetting data start Damien Le Moal @ 2021-04-07 15:49 ` Damien Le Moal 2021-04-15 0:32 ` [PATCH v2 0/2] Fix binfmt_flat loader for RISC-V Damien Le Moal 2 siblings, 0 replies; 10+ messages in thread From: Damien Le Moal @ 2021-04-07 15:49 UTC (permalink / raw) To: Palmer Dabbelt, linux-riscv, Alexander Viro, linux-kernel Cc: Max Filippov, Greg Ungerer, Anup Patel, Christoph Hellwig uclibc/gcc combined with elf2flt riscv linker file fully resolve the PC relative __global_pointer$ value at compile time and do not generate a relocation entry to set a runtime gp value. As a result, if the flatbin loader introduces a gap between the text and data sections, the gp value becomes incorrect and prevent correct execution of a flatbin executable. Avoid this problem by enabling CONFIG_BINFMT_FLAT_NO_TEXT_DATA_GAP automatically when CONFIG_RISCV is enabled and CONFIG_MMU disabled. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> --- arch/riscv/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig index 0d0cf67359cb..6a85fbbd056e 100644 --- a/arch/riscv/Kconfig +++ b/arch/riscv/Kconfig @@ -33,6 +33,7 @@ config RISCV select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT if MMU select ARCH_WANT_FRAME_POINTERS select ARCH_WANT_HUGE_PMD_SHARE if 64BIT + select BINFMT_FLAT_NO_TEXT_DATA_GAP if !MMU select CLONE_BACKWARDS select CLINT_TIMER if !MMU select COMMON_CLK -- 2.30.2 _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv ^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH v2 0/2] Fix binfmt_flat loader for RISC-V 2021-04-07 15:49 [PATCH v2 0/2] Fix binfmt_flat loader for RISC-V Damien Le Moal 2021-04-07 15:49 ` [PATCH v2 1/2] binfmt_flat: allow not offsetting data start Damien Le Moal 2021-04-07 15:49 ` [PATCH v2 2/2] riscv: Disable text-data gap in flat binaries Damien Le Moal @ 2021-04-15 0:32 ` Damien Le Moal 2021-04-15 5:46 ` Palmer Dabbelt 2 siblings, 1 reply; 10+ messages in thread From: Damien Le Moal @ 2021-04-15 0:32 UTC (permalink / raw) To: Palmer Dabbelt, linux-riscv, Alexander Viro, linux-kernel Cc: Max Filippov, Greg Ungerer, Anup Patel, Christoph Hellwig On 2021/04/08 0:49, Damien Le Moal wrote: > RISC-V NOMMU flat binaries cannot tolerate a gap between the text and > data section as the toolchain fully resolves at compile time the PC > relative global pointer (__global_pointer$ value loaded in gp register). > Without a relocation entry provided, the flat bin loader cannot fix the > value if a gap is introduced and executables fail to run. > > This series fixes this problem by allowing an architecture to request > the flat loader to suppress the gap between the text and data sections. > The first patch fixes binfmt_flat flat_load_file() using the new > configuration option CONFIG_BINFMT_FLAT_NO_TEXT_DATA_GAP. The second > patch enables this option for RISCV NOMMU builds. > > These patches do not change the binfmt_flat loader behavior for other > architectures. > > Changes from v1: > * Replace FLAT_TEXT_DATA_NO_GAP macro with > CONFIG_BINFMT_FLAT_NO_TEXT_DATA_GAP config option (patch 1). > * Remove the addition of riscv/include/asm/flat.h and set > CONFIG_BINFMT_FLAT_NO_TEXT_DATA_GAP for RISCV and !MMU > > Damien Le Moal (2): > binfmt_flat: allow not offsetting data start > riscv: Disable text-data gap in flat binaries > > arch/riscv/Kconfig | 1 + > fs/Kconfig.binfmt | 3 +++ > fs/binfmt_flat.c | 21 +++++++++++++++------ > 3 files changed, 19 insertions(+), 6 deletions(-) > Ping ? Any comment on these patches ? Without them, RISC-V NOMMU user space does not run... I would really like to get these in this cycle if possible. -- Damien Le Moal Western Digital Research _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2 0/2] Fix binfmt_flat loader for RISC-V 2021-04-15 0:32 ` [PATCH v2 0/2] Fix binfmt_flat loader for RISC-V Damien Le Moal @ 2021-04-15 5:46 ` Palmer Dabbelt 2021-04-15 5:56 ` Christoph Hellwig 0 siblings, 1 reply; 10+ messages in thread From: Palmer Dabbelt @ 2021-04-15 5:46 UTC (permalink / raw) To: Damien Le Moal, viro Cc: linux-riscv, linux-kernel, jcmvbkbc, gerg, Anup Patel, Christoph Hellwig On Wed, 14 Apr 2021 17:32:10 PDT (-0700), Damien Le Moal wrote: >> On 2021/04/08 0:49, Damien Le Moal wrote: >> RISC-V NOMMU flat binaries cannot tolerate a gap between the text and >> data section as the toolchain fully resolves at compile time the PC >> relative global pointer (__global_pointer$ value loaded in gp register). >> Without a relocation entry provided, the flat bin loader cannot fix the >> value if a gap is introduced and executables fail to run. >> >> This series fixes this problem by allowing an architecture to request >> the flat loader to suppress the gap between the text and data sections. >> The first patch fixes binfmt_flat flat_load_file() using the new >> configuration option CONFIG_BINFMT_FLAT_NO_TEXT_DATA_GAP. The second >> patch enables this option for RISCV NOMMU builds. >> >> These patches do not change the binfmt_flat loader behavior for other >> architectures. >> >> Changes from v1: >> * Replace FLAT_TEXT_DATA_NO_GAP macro with >> CONFIG_BINFMT_FLAT_NO_TEXT_DATA_GAP config option (patch 1). >> * Remove the addition of riscv/include/asm/flat.h and set >> CONFIG_BINFMT_FLAT_NO_TEXT_DATA_GAP for RISCV and !MMU >> >> Damien Le Moal (2): >> binfmt_flat: allow not offsetting data start >> riscv: Disable text-data gap in flat binaries >> >> arch/riscv/Kconfig | 1 + >> fs/Kconfig.binfmt | 3 +++ >> fs/binfmt_flat.c | 21 +++++++++++++++------ >> 3 files changed, 19 insertions(+), 6 deletions(-) >> > > Ping ? > > Any comment on these patches ? > > Without them, RISC-V NOMMU user space does not run... I would really like to get > these in this cycle if possible. This LGTM, but it's pretty far out of my area of expertise. I'm happy to take them via my tree, but I'd prefer to get an Ack from someone. Al, get_maintainer suggests you? Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2 0/2] Fix binfmt_flat loader for RISC-V 2021-04-15 5:46 ` Palmer Dabbelt @ 2021-04-15 5:56 ` Christoph Hellwig 2021-04-15 6:16 ` Damien Le Moal 2021-04-16 0:21 ` Al Viro 0 siblings, 2 replies; 10+ messages in thread From: Christoph Hellwig @ 2021-04-15 5:56 UTC (permalink / raw) To: Palmer Dabbelt Cc: Damien Le Moal, viro, linux-riscv, linux-kernel, jcmvbkbc, gerg, Anup Patel, Christoph Hellwig, uclinux-dev binfmt_flat tends to go through Greg's uclinux tree, adding him and the list. On Wed, Apr 14, 2021 at 10:46:36PM -0700, Palmer Dabbelt wrote: > On Wed, 14 Apr 2021 17:32:10 PDT (-0700), Damien Le Moal wrote: >>> On 2021/04/08 0:49, Damien Le Moal wrote: >>> RISC-V NOMMU flat binaries cannot tolerate a gap between the text and >>> data section as the toolchain fully resolves at compile time the PC >>> relative global pointer (__global_pointer$ value loaded in gp register). >>> Without a relocation entry provided, the flat bin loader cannot fix the >>> value if a gap is introduced and executables fail to run. >>> >>> This series fixes this problem by allowing an architecture to request >>> the flat loader to suppress the gap between the text and data sections. >>> The first patch fixes binfmt_flat flat_load_file() using the new >>> configuration option CONFIG_BINFMT_FLAT_NO_TEXT_DATA_GAP. The second >>> patch enables this option for RISCV NOMMU builds. >>> >>> These patches do not change the binfmt_flat loader behavior for other >>> architectures. >>> >>> Changes from v1: >>> * Replace FLAT_TEXT_DATA_NO_GAP macro with >>> CONFIG_BINFMT_FLAT_NO_TEXT_DATA_GAP config option (patch 1). >>> * Remove the addition of riscv/include/asm/flat.h and set >>> CONFIG_BINFMT_FLAT_NO_TEXT_DATA_GAP for RISCV and !MMU >>> >>> Damien Le Moal (2): >>> binfmt_flat: allow not offsetting data start >>> riscv: Disable text-data gap in flat binaries >>> >>> arch/riscv/Kconfig | 1 + >>> fs/Kconfig.binfmt | 3 +++ >>> fs/binfmt_flat.c | 21 +++++++++++++++------ >>> 3 files changed, 19 insertions(+), 6 deletions(-) >>> >> >> Ping ? >> >> Any comment on these patches ? >> >> Without them, RISC-V NOMMU user space does not run... I would really like to get >> these in this cycle if possible. > > This LGTM, but it's pretty far out of my area of expertise. I'm happy to > take them via my tree, but I'd prefer to get an Ack from someone. > > Al, get_maintainer suggests you? > > Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> ---end quoted text--- _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2 0/2] Fix binfmt_flat loader for RISC-V 2021-04-15 5:56 ` Christoph Hellwig @ 2021-04-15 6:16 ` Damien Le Moal 2021-04-16 0:21 ` Al Viro 1 sibling, 0 replies; 10+ messages in thread From: Damien Le Moal @ 2021-04-15 6:16 UTC (permalink / raw) To: Christoph Hellwig, Palmer Dabbelt Cc: viro, linux-riscv, linux-kernel, jcmvbkbc, gerg, Anup Patel, uclinux-dev On 2021/04/15 14:56, Christoph Hellwig wrote: > binfmt_flat tends to go through Greg's uclinux tree, adding him and > the list. Thanks Christoph. I resent the series adding Gerg and uclinux-dev. MAINTAINERS file needs an update may be ? > > On Wed, Apr 14, 2021 at 10:46:36PM -0700, Palmer Dabbelt wrote: >> On Wed, 14 Apr 2021 17:32:10 PDT (-0700), Damien Le Moal wrote: >>>> On 2021/04/08 0:49, Damien Le Moal wrote: >>>> RISC-V NOMMU flat binaries cannot tolerate a gap between the text and >>>> data section as the toolchain fully resolves at compile time the PC >>>> relative global pointer (__global_pointer$ value loaded in gp register). >>>> Without a relocation entry provided, the flat bin loader cannot fix the >>>> value if a gap is introduced and executables fail to run. >>>> >>>> This series fixes this problem by allowing an architecture to request >>>> the flat loader to suppress the gap between the text and data sections. >>>> The first patch fixes binfmt_flat flat_load_file() using the new >>>> configuration option CONFIG_BINFMT_FLAT_NO_TEXT_DATA_GAP. The second >>>> patch enables this option for RISCV NOMMU builds. >>>> >>>> These patches do not change the binfmt_flat loader behavior for other >>>> architectures. >>>> >>>> Changes from v1: >>>> * Replace FLAT_TEXT_DATA_NO_GAP macro with >>>> CONFIG_BINFMT_FLAT_NO_TEXT_DATA_GAP config option (patch 1). >>>> * Remove the addition of riscv/include/asm/flat.h and set >>>> CONFIG_BINFMT_FLAT_NO_TEXT_DATA_GAP for RISCV and !MMU >>>> >>>> Damien Le Moal (2): >>>> binfmt_flat: allow not offsetting data start >>>> riscv: Disable text-data gap in flat binaries >>>> >>>> arch/riscv/Kconfig | 1 + >>>> fs/Kconfig.binfmt | 3 +++ >>>> fs/binfmt_flat.c | 21 +++++++++++++++------ >>>> 3 files changed, 19 insertions(+), 6 deletions(-) >>>> >>> >>> Ping ? >>> >>> Any comment on these patches ? >>> >>> Without them, RISC-V NOMMU user space does not run... I would really like to get >>> these in this cycle if possible. >> >> This LGTM, but it's pretty far out of my area of expertise. I'm happy to >> take them via my tree, but I'd prefer to get an Ack from someone. >> >> Al, get_maintainer suggests you? >> >> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> > ---end quoted text--- > -- Damien Le Moal Western Digital Research _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2 0/2] Fix binfmt_flat loader for RISC-V 2021-04-15 5:56 ` Christoph Hellwig 2021-04-15 6:16 ` Damien Le Moal @ 2021-04-16 0:21 ` Al Viro 2021-04-16 0:26 ` Damien Le Moal 1 sibling, 1 reply; 10+ messages in thread From: Al Viro @ 2021-04-16 0:21 UTC (permalink / raw) To: Christoph Hellwig Cc: Palmer Dabbelt, Damien Le Moal, linux-riscv, linux-kernel, jcmvbkbc, gerg, Anup Patel, uclinux-dev On Thu, Apr 15, 2021 at 07:56:05AM +0200, Christoph Hellwig wrote: > binfmt_flat tends to go through Greg's uclinux tree, adding him and > the list. FWIW, my involvement with binfmt_flat had been pretty much nil - the least trivial had been "binfmt_flat: flat_{get,put}_addr_from_rp() should be able to fail" about 4 years ago and that fell out of hunting for places where __get_user() had been used without checking error values. It's in fs/*, but I've no way to test it and I have pretty much zero familiarity with the guts of that one, so I can't give any useful feedback on that series. So consider the Christoph's comment seconded - you want it reviewed by gerg et.al., and it probably ought to go via gerg/uclinux.git tree. I'm reasonably familiar with binfmt_{elf,misc,script}; anything else gets touched as part of larger series and only with sanity checks from other folks, if the changes are not entirely trivial. _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2 0/2] Fix binfmt_flat loader for RISC-V 2021-04-16 0:21 ` Al Viro @ 2021-04-16 0:26 ` Damien Le Moal 2021-04-16 7:26 ` Greg Ungerer 0 siblings, 1 reply; 10+ messages in thread From: Damien Le Moal @ 2021-04-16 0:26 UTC (permalink / raw) To: Al Viro, Christoph Hellwig Cc: Palmer Dabbelt, linux-riscv, linux-kernel, jcmvbkbc, gerg, Anup Patel, uclinux-dev On 2021/04/16 9:22, Al Viro wrote: > On Thu, Apr 15, 2021 at 07:56:05AM +0200, Christoph Hellwig wrote: >> binfmt_flat tends to go through Greg's uclinux tree, adding him and >> the list. > > FWIW, my involvement with binfmt_flat had been pretty much nil - > the least trivial had been "binfmt_flat: flat_{get,put}_addr_from_rp() > should be able to fail" about 4 years ago and that fell out of hunting > for places where __get_user() had been used without checking error values. > > It's in fs/*, but I've no way to test it and I have pretty much > zero familiarity with the guts of that one, so I can't give any useful > feedback on that series. So consider the Christoph's comment seconded - > you want it reviewed by gerg et.al., and it probably ought to go via > gerg/uclinux.git tree. > > I'm reasonably familiar with binfmt_{elf,misc,script}; anything > else gets touched as part of larger series and only with sanity checks > from other folks, if the changes are not entirely trivial. Al, Thanks for the clarification. Would it make sense to have an entry in MAINTAINERS file pointing to Greg and the uclinux tree for binfmt_flat.c ? Greg ? -- Damien Le Moal Western Digital Research _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2 0/2] Fix binfmt_flat loader for RISC-V 2021-04-16 0:26 ` Damien Le Moal @ 2021-04-16 7:26 ` Greg Ungerer 0 siblings, 0 replies; 10+ messages in thread From: Greg Ungerer @ 2021-04-16 7:26 UTC (permalink / raw) To: Damien Le Moal, Al Viro, Christoph Hellwig Cc: Palmer Dabbelt, linux-riscv, linux-kernel, jcmvbkbc, Anup Patel, uclinux-dev On 16/4/21 10:26 am, Damien Le Moal wrote: > On 2021/04/16 9:22, Al Viro wrote: >> On Thu, Apr 15, 2021 at 07:56:05AM +0200, Christoph Hellwig wrote: >>> binfmt_flat tends to go through Greg's uclinux tree, adding him and >>> the list. >> >> FWIW, my involvement with binfmt_flat had been pretty much nil - >> the least trivial had been "binfmt_flat: flat_{get,put}_addr_from_rp() >> should be able to fail" about 4 years ago and that fell out of hunting >> for places where __get_user() had been used without checking error values. >> >> It's in fs/*, but I've no way to test it and I have pretty much >> zero familiarity with the guts of that one, so I can't give any useful >> feedback on that series. So consider the Christoph's comment seconded - >> you want it reviewed by gerg et.al., and it probably ought to go via >> gerg/uclinux.git tree. >> >> I'm reasonably familiar with binfmt_{elf,misc,script}; anything >> else gets touched as part of larger series and only with sanity checks >> from other folks, if the changes are not entirely trivial. > > Al, > > Thanks for the clarification. Would it make sense to have an entry in > MAINTAINERS file pointing to Greg and the uclinux tree for binfmt_flat.c ? > Greg ? Yep, looks like it does need that. Regards Greg _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2021-04-16 7:47 UTC | newest] Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-04-07 15:49 [PATCH v2 0/2] Fix binfmt_flat loader for RISC-V Damien Le Moal 2021-04-07 15:49 ` [PATCH v2 1/2] binfmt_flat: allow not offsetting data start Damien Le Moal 2021-04-07 15:49 ` [PATCH v2 2/2] riscv: Disable text-data gap in flat binaries Damien Le Moal 2021-04-15 0:32 ` [PATCH v2 0/2] Fix binfmt_flat loader for RISC-V Damien Le Moal 2021-04-15 5:46 ` Palmer Dabbelt 2021-04-15 5:56 ` Christoph Hellwig 2021-04-15 6:16 ` Damien Le Moal 2021-04-16 0:21 ` Al Viro 2021-04-16 0:26 ` Damien Le Moal 2021-04-16 7:26 ` Greg Ungerer
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).