linux-spi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Ramuthevar,Vadivel MuruganX" <vadivel.muruganx.ramuthevar-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
To: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	vigneshr-l0cyMroinI0@public.gmane.org
Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	simon.k.r.goldschmidt-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
	dinguyen-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	tien.fong.chee-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
	marex-ynQEQJNshbs@public.gmane.org,
	cheol.yong.kim-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
	qi-ming.wu-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
	Ramuthevar Vadivel Murugan
	<vadivel.muruganx.ramuthevar-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
Subject: [PATCH v10 1/2] dt-bindings: spi: Add schema for Cadence QSPI Controller driver
Date: Wed, 19 Feb 2020 10:28:51 +0800	[thread overview]
Message-ID: <20200219022852.28065-2-vadivel.muruganx.ramuthevar@linux.intel.com> (raw)
In-Reply-To: <20200219022852.28065-1-vadivel.muruganx.ramuthevar-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>

From: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>

Add dt-bindings documentation for Cadence-QSPI controller to support
spi based flash memories.

Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
 .../devicetree/bindings/spi/cdns,qspi-nor.yaml     | 147 +++++++++++++++++++++
 1 file changed, 147 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml

diff --git a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
new file mode 100644
index 000000000000..1a4d6e8d0d0b
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
@@ -0,0 +1,147 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/spi/cdns,qspi-nor.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Cadence QSPI Flash Controller support
+
+maintainers:
+  - Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
+
+allOf:
+  - $ref: "spi-controller.yaml#"
+
+description: |
+  Binding Documentation for Cadence QSPI controller,This controller is
+  present in the Intel LGM, Altera SoCFPGA and TI SoCs and this driver
+  has been tested On Intel's LGM SoC.
+
+  - compatible : should be one of the following:
+        Generic default - "cdns,qspi-nor".
+        For TI 66AK2G SoC - "ti,k2g-qspi", "cdns,qspi-nor".
+        For TI AM654 SoC  - "ti,am654-ospi", "cdns,qspi-nor".
+        For Intel LGM SoC - "intel,lgm-qspi", "cdns,qspi-nor".
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+        - enum:
+           - ti,k2g-qspi
+        - const: cdns,qspi-nor
+
+      - items:
+        - enum:
+           - ti,am654-ospi
+        - const: cdns,qspi-nor
+
+      - items:
+        - enum:
+           - intel,lgm-qspi
+        - const: cdns,qspi-nor
+
+      - items:
+        - const: cdns,qspi-nor
+
+  reg:
+    maxItems: 2
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  cdns,fifo-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Size of the data FIFO in words.
+
+  cdns,fifo-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Bus width of the data FIFO in bytes.
+
+  cdns,trigger-address:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      32-bit indirect AHB trigger address.
+
+  cdns,rclk-en:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Flag to indicate that QSPI return clock is used to latch the read data
+      rather than the QSPI clock. Make sure that QSPI return clock is populated
+      on the board before using this property.
+
+# subnode's properties
+patternProperties:
+  "^.*@[0-9a-fA-F]+$":
+    type: object
+    description:
+      flash device uses the subnodes below defined properties.
+
+  cdns,read-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Delay for read capture logic, in clock cycles.
+
+  cdns,tshsl-ns:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Delay in nanoseconds for the length that the master mode chip select
+      outputs are de-asserted between transactions.
+
+  cdns,tsd2d-ns:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Delay in nanoseconds between one chip select being de-activated
+      and the activation of another.
+
+  cdns,tchsh-ns:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Delay in nanoseconds between last bit of current transaction and
+      deasserting the device chip select (qspi_n_ss_out).
+
+  cdns,tslch-ns:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Delay in nanoseconds between setting qspi_n_ss_out low and
+      first bit transfer.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - cdns,fifo-depth
+  - cdns,fifo-width
+  - cdns,trigger-address
+
+examples:
+  - |
+    qspi: spi@ff705000 {
+          compatible = "cdns,qspi-nor";
+          #address-cells = <1>;
+          #size-cells = <0>;
+          reg = <0xff705000 0x1000>,
+                <0xffa00000 0x1000>;
+          interrupts = <0 151 4>;
+          clocks = <&qspi_clk>;
+          cdns,fifo-depth = <128>;
+          cdns,fifo-width = <4>;
+          cdns,trigger-address = <0x00000000>;
+
+          flash0: n25q00@0 {
+              compatible = "jedec,spi-nor";
+              reg = <0x0>;
+              cdns,read-delay = <4>;
+              cdns,tshsl-ns = <50>;
+              cdns,tsd2d-ns = <50>;
+              cdns,tchsh-ns = <4>;
+              cdns,tslch-ns = <4>;
+          };
+    };
+
-- 
2.11.0

  parent reply	other threads:[~2020-02-19  2:28 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-19  2:28 [PATCH v10 0/2] spi: cadence-quadpsi: Add support for the Cadence QSPI controller Ramuthevar,Vadivel MuruganX
     [not found] ` <20200219022852.28065-1-vadivel.muruganx.ramuthevar-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2020-02-19  2:28   ` Ramuthevar,Vadivel MuruganX [this message]
     [not found]     ` <20200219022852.28065-2-vadivel.muruganx.ramuthevar-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2020-02-24 15:54       ` [PATCH v10 1/2] dt-bindings: spi: Add schema for Cadence QSPI Controller driver Rob Herring
     [not found]         ` <CAL_JsqKJky=y4nhECUFVzTYvEpjFoOH_6UY9uZG5bvBVWq=SYQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2020-02-25  6:24           ` Ramuthevar, Vadivel MuruganX
     [not found]             ` <64b7ab12-0c11-df25-95e7-ee62227ec7ec-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2020-02-25  6:41               ` Vignesh Raghavendra
     [not found]                 ` <85178128-4906-8b1a-e3f1-ab7a36ff8c23-l0cyMroinI0@public.gmane.org>
2020-02-25  7:38                   ` Ramuthevar, Vadivel MuruganX
     [not found]                     ` <c119a70d-b7ef-ab1b-4590-7ac77395297f-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2020-02-25 11:00                       ` Vignesh Raghavendra
     [not found]                         ` <8c329860-84fd-463b-782f-83a788998878-l0cyMroinI0@public.gmane.org>
2020-02-26  1:32                           ` Ramuthevar, Vadivel MuruganX
2020-02-27  5:23                             ` Vignesh Raghavendra
     [not found]                               ` <22bb0c6c-db03-dee5-eccf-84b00216308f-l0cyMroinI0@public.gmane.org>
2020-02-27  5:59                                 ` Ramuthevar, Vadivel MuruganX
2020-02-19  2:28   ` [PATCH v10 2/2] spi: cadence-quadpsi: Add support for the Cadence QSPI controller Ramuthevar,Vadivel MuruganX
2020-02-19  8:28   ` [PATCH v10 0/2] " Marek Vasut
2020-02-25  4:23   ` Vignesh Raghavendra
     [not found]     ` <99f7e23f-268d-f32b-086f-4a46fc232ce9-l0cyMroinI0@public.gmane.org>
2020-02-25  6:33       ` Ramuthevar, Vadivel MuruganX

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200219022852.28065-2-vadivel.muruganx.ramuthevar@linux.intel.com \
    --to=vadivel.muruganx.ramuthevar-vuqaysv1563yd54fqh9/ca@public.gmane.org \
    --cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=cheol.yong.kim-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
    --cc=dinguyen-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=marex-ynQEQJNshbs@public.gmane.org \
    --cc=qi-ming.wu-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=simon.k.r.goldschmidt-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=tien.fong.chee-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
    --cc=vigneshr-l0cyMroinI0@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).