From: Guenter Roeck <linux@roeck-us.net>
To: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
linux-watchdog@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org
Subject: Re: [PATCH v3 04/12] watchdog: s3c2410: Let kernel kick watchdog
Date: Wed, 17 Nov 2021 05:34:59 -0800 [thread overview]
Message-ID: <20211117133459.GD2435591@roeck-us.net> (raw)
In-Reply-To: <20211107202943.8859-5-semen.protsenko@linaro.org>
On Sun, Nov 07, 2021 at 10:29:35PM +0200, Sam Protsenko wrote:
> When "tmr_atboot" module param is set, the watchdog is started in
> driver's probe. In that case, also set WDOG_HW_RUNNING bit to let
> watchdog core driver know it's running. This way watchdog core can kick
> the watchdog for us (if CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED option is
> enabled), until user space takes control.
>
> WDOG_HW_RUNNING bit must be set before registering the watchdog. So the
> "tmr_atboot" handling code is moved before watchdog registration, to
> avoid performing the same check twice. This is also logical because
> WDOG_HW_RUNNING bit makes WDT core expect actually running watchdog.
>
> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
> ---
> Changes in v3:
> - Added R-b tag by Krzysztof Kozlowski
>
> Changes in v2:
> - Added explanation on moving the code block to commit message
> - [PATCH 03/12] handles the case when tmr_atboot is present but valid
> timeout wasn't found
>
> drivers/watchdog/s3c2410_wdt.c | 26 +++++++++++++++-----------
> 1 file changed, 15 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
> index 00421cf22556..0845c05034a1 100644
> --- a/drivers/watchdog/s3c2410_wdt.c
> +++ b/drivers/watchdog/s3c2410_wdt.c
> @@ -604,6 +604,21 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
> wdt->wdt_device.bootstatus = s3c2410wdt_get_bootstatus(wdt);
> wdt->wdt_device.parent = dev;
>
> + /*
> + * If "tmr_atboot" param is non-zero, start the watchdog right now. Also
> + * set WDOG_HW_RUNNING bit, so that watchdog core can kick the watchdog.
> + *
> + * If we're not enabling the watchdog, then ensure it is disabled if it
> + * has been left running from the bootloader or other source.
> + */
> + if (tmr_atboot) {
> + dev_info(dev, "starting watchdog timer\n");
> + s3c2410wdt_start(&wdt->wdt_device);
> + set_bit(WDOG_HW_RUNNING, &wdt->wdt_device.status);
> + } else {
> + s3c2410wdt_stop(&wdt->wdt_device);
> + }
> +
> ret = watchdog_register_device(&wdt->wdt_device);
> if (ret)
> goto err_cpufreq;
> @@ -612,17 +627,6 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
> if (ret < 0)
> goto err_unregister;
>
> - if (tmr_atboot) {
> - dev_info(dev, "starting watchdog timer\n");
> - s3c2410wdt_start(&wdt->wdt_device);
> - } else {
> - /* if we're not enabling the watchdog, then ensure it is
> - * disabled if it has been left running from the bootloader
> - * or other source */
> -
> - s3c2410wdt_stop(&wdt->wdt_device);
> - }
> -
> platform_set_drvdata(pdev, wdt);
>
> /* print out a statement of readiness */
> --
> 2.30.2
>
next prev parent reply other threads:[~2021-11-17 13:35 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-07 20:29 [PATCH v3 00/12] watchdog: s3c2410: Add Exynos850 support Sam Protsenko
2021-11-07 20:29 ` [PATCH v3 01/12] dt-bindings: watchdog: Require samsung,syscon-phandle for Exynos7 Sam Protsenko
2021-11-17 13:33 ` Guenter Roeck
2021-11-07 20:29 ` [PATCH v3 02/12] dt-bindings: watchdog: Document Exynos850 watchdog bindings Sam Protsenko
2021-11-08 13:08 ` Krzysztof Kozlowski
2021-11-12 22:43 ` Rob Herring
2021-11-17 13:34 ` Guenter Roeck
2021-11-07 20:29 ` [PATCH v3 03/12] watchdog: s3c2410: Fail probe if can't find valid timeout Sam Protsenko
2021-11-17 13:34 ` Guenter Roeck
2021-11-07 20:29 ` [PATCH v3 04/12] watchdog: s3c2410: Let kernel kick watchdog Sam Protsenko
2021-11-17 13:34 ` Guenter Roeck [this message]
2021-11-07 20:29 ` [PATCH v3 05/12] watchdog: s3c2410: Make reset disable register optional Sam Protsenko
2021-11-17 13:35 ` Guenter Roeck
2021-11-07 20:29 ` [PATCH v3 06/12] watchdog: s3c2410: Extract disable and mask code into separate functions Sam Protsenko
2021-11-17 13:35 ` Guenter Roeck
2021-11-07 20:29 ` [PATCH v3 07/12] watchdog: s3c2410: Implement a way to invert mask reg value Sam Protsenko
2021-11-17 13:35 ` Guenter Roeck
2021-11-07 20:29 ` [PATCH v3 08/12] watchdog: s3c2410: Add support for WDT counter enable register Sam Protsenko
2021-11-17 13:36 ` Guenter Roeck
2021-11-07 20:29 ` [PATCH v3 09/12] watchdog: s3c2410: Cleanup PMU related code Sam Protsenko
2021-11-17 13:36 ` Guenter Roeck
2021-11-07 20:29 ` [PATCH v3 10/12] watchdog: s3c2410: Support separate source clock Sam Protsenko
2021-11-08 13:24 ` Krzysztof Kozlowski
2021-11-17 13:37 ` Guenter Roeck
2021-11-07 20:29 ` [PATCH v3 11/12] watchdog: s3c2410: Remove superfluous err label Sam Protsenko
2021-11-17 13:37 ` Guenter Roeck
2021-11-07 20:29 ` [PATCH v3 12/12] watchdog: s3c2410: Add Exynos850 support Sam Protsenko
2021-11-08 13:25 ` Krzysztof Kozlowski
2021-11-17 13:37 ` Guenter Roeck
2021-11-20 20:29 ` Guenter Roeck
2021-11-21 16:25 ` Sam Protsenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211117133459.GD2435591@roeck-us.net \
--to=linux@roeck-us.net \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski@canonical.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=semen.protsenko@linaro.org \
--cc=wim@linux-watchdog.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).