linux-watchdog.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [v3,0/9] Add basic SoC support for mediatek mt7986
@ 2021-09-14  8:51 Sam Shih
  2021-09-14  8:51 ` [v3,1/9] dt-bindings: clock: mediatek: document clk bindings for mediatek mt7986 SoC Sam Shih
                   ` (8 more replies)
  0 siblings, 9 replies; 34+ messages in thread
From: Sam Shih @ 2021-09-14  8:51 UTC (permalink / raw)
  To: Rob Herring, Sean Wang, Linus Walleij, Matthias Brugger,
	Matt Mackall, Herbert Xu, Greg Kroah-Hartman, Wim Van Sebroeck,
	Guenter Roeck, Michael Turquette, Stephen Boyd, Hsin-Yi Wang,
	Enric Balletbo i Serra, Fabien Parent, Seiya Wang, devicetree,
	linux-kernel, linux-mediatek, linux-gpio, linux-arm-kernel,
	linux-crypto, linux-serial, linux-watchdog, linux-clk
  Cc: John Crispin, Ryder Lee, Sam Shih

This patch adds basic SoC support for Mediatek's new 4-core SoC,
MT7986, which is mainly for wifi-router application.

---
v3: updated mt7986 pinctrl releated dt-bindig,
    updated mt7986 pinctrl driver according to reviewers's suggestion
    fixed wrong clock ID in mt7986-clock-IDs
    added Acked-by tag in some patches
v2: updated mt7986 clock releated IDs, dt-binding, and driver
    updated mt7986 clock releated dt-binding and driver
    updated device tree of mt7986a and mt7986b

Sam Shih (9):
  dt-bindings: clock: mediatek: document clk bindings for mediatek
    mt7986 SoC
  clk: mediatek: add mt7986 clock IDs
  clk: mediatek: add mt7986 clock support
  pinctrl: mediatek: moore: check if pin_desc is valid before use
  dt-bindings: pinctrl: update bindings for MT7986 SoC
  pinctrl: mediatek: add support for MT7986 SoC
  dt-bindings: arm64: dts: mediatek: Add mt7986 series
  arm64: dts: mediatek: add mt7986a support
  arm64: dts: mediatek: add mt7986b support

 .../devicetree/bindings/arm/mediatek.yaml     |   8 +
 .../arm/mediatek/mediatek,apmixedsys.txt      |   1 +
 .../bindings/arm/mediatek/mediatek,ethsys.txt |   1 +
 .../arm/mediatek/mediatek,infracfg.txt        |   1 +
 .../arm/mediatek/mediatek,sgmiisys.txt        |   2 +
 .../arm/mediatek/mediatek,topckgen.txt        |   1 +
 .../pinctrl/mediatek,mt7986-pinctrl.txt       | 300 ++++++
 arch/arm64/boot/dts/mediatek/Makefile         |   2 +
 arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts  |  49 +
 arch/arm64/boot/dts/mediatek/mt7986a.dtsi     | 227 +++++
 arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts  |  21 +
 arch/arm64/boot/dts/mediatek/mt7986b.dtsi     | 227 +++++
 drivers/clk/mediatek/Kconfig                  |  17 +
 drivers/clk/mediatek/Makefile                 |   4 +
 drivers/clk/mediatek/clk-mt7986-apmixed.c     |  78 ++
 drivers/clk/mediatek/clk-mt7986-eth.c         | 132 +++
 drivers/clk/mediatek/clk-mt7986-infracfg.c    | 198 ++++
 drivers/clk/mediatek/clk-mt7986-topckgen.c    | 319 ++++++
 drivers/pinctrl/mediatek/Kconfig              |   7 +
 drivers/pinctrl/mediatek/Makefile             |   1 +
 drivers/pinctrl/mediatek/pinctrl-moore.c      |  18 +
 drivers/pinctrl/mediatek/pinctrl-mt7986.c     | 928 ++++++++++++++++++
 include/dt-bindings/clock/mt7986-clk.h        | 169 ++++
 23 files changed, 2711 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.txt
 create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a.dtsi
 create mode 100644 arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt7986b.dtsi
 create mode 100644 drivers/clk/mediatek/clk-mt7986-apmixed.c
 create mode 100644 drivers/clk/mediatek/clk-mt7986-eth.c
 create mode 100644 drivers/clk/mediatek/clk-mt7986-infracfg.c
 create mode 100644 drivers/clk/mediatek/clk-mt7986-topckgen.c
 create mode 100644 drivers/pinctrl/mediatek/pinctrl-mt7986.c
 create mode 100644 include/dt-bindings/clock/mt7986-clk.h

-- 
2.29.2


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [v3,1/9] dt-bindings: clock: mediatek: document clk bindings for mediatek mt7986 SoC
  2021-09-14  8:51 [v3,0/9] Add basic SoC support for mediatek mt7986 Sam Shih
@ 2021-09-14  8:51 ` Sam Shih
  2021-09-14  8:51 ` [v3,2/9] clk: mediatek: add mt7986 clock IDs Sam Shih
                   ` (7 subsequent siblings)
  8 siblings, 0 replies; 34+ messages in thread
From: Sam Shih @ 2021-09-14  8:51 UTC (permalink / raw)
  To: Rob Herring, Sean Wang, Linus Walleij, Matthias Brugger,
	Matt Mackall, Herbert Xu, Greg Kroah-Hartman, Wim Van Sebroeck,
	Guenter Roeck, Michael Turquette, Stephen Boyd, Hsin-Yi Wang,
	Enric Balletbo i Serra, Fabien Parent, Seiya Wang, devicetree,
	linux-kernel, linux-mediatek, linux-gpio, linux-arm-kernel,
	linux-crypto, linux-serial, linux-watchdog, linux-clk
  Cc: John Crispin, Ryder Lee, Sam Shih

This patch adds the binding documentation for topckgen, apmixedsys,
infracfg, and ethernet subsystem clocks.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>

---
v3: Added an Acked-by tag
v2: remove compatiable string 'mt7986-sgmiisys'
---
 .../devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt    | 1 +
 .../devicetree/bindings/arm/mediatek/mediatek,ethsys.txt        | 1 +
 .../devicetree/bindings/arm/mediatek/mediatek,infracfg.txt      | 1 +
 .../devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt      | 2 ++
 .../devicetree/bindings/arm/mediatek/mediatek,topckgen.txt      | 1 +
 5 files changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
index ea827e8763de..3fa755866528 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
@@ -14,6 +14,7 @@ Required Properties:
 	- "mediatek,mt7622-apmixedsys"
 	- "mediatek,mt7623-apmixedsys", "mediatek,mt2701-apmixedsys"
 	- "mediatek,mt7629-apmixedsys"
+	- "mediatek,mt7986-apmixedsys"
 	- "mediatek,mt8135-apmixedsys"
 	- "mediatek,mt8167-apmixedsys", "syscon"
 	- "mediatek,mt8173-apmixedsys"
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
index 6b7e8067e7aa..0502db73686b 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
@@ -10,6 +10,7 @@ Required Properties:
 	- "mediatek,mt7622-ethsys", "syscon"
 	- "mediatek,mt7623-ethsys", "mediatek,mt2701-ethsys", "syscon"
 	- "mediatek,mt7629-ethsys", "syscon"
+	- "mediatek,mt7986-ethsys", "syscon"
 - #clock-cells: Must be 1
 - #reset-cells: Must be 1
 
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
index eb3523c7a7be..f66bd720571d 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
@@ -15,6 +15,7 @@ Required Properties:
 	- "mediatek,mt7622-infracfg", "syscon"
 	- "mediatek,mt7623-infracfg", "mediatek,mt2701-infracfg", "syscon"
 	- "mediatek,mt7629-infracfg", "syscon"
+	- "mediatek,mt7986-infracfg", "syscon"
 	- "mediatek,mt8135-infracfg", "syscon"
 	- "mediatek,mt8167-infracfg", "syscon"
 	- "mediatek,mt8173-infracfg", "syscon"
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt
index 30cb645c0e54..29ca7a10b315 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt
@@ -8,6 +8,8 @@ Required Properties:
 - compatible: Should be:
 	- "mediatek,mt7622-sgmiisys", "syscon"
 	- "mediatek,mt7629-sgmiisys", "syscon"
+	- "mediatek,mt7986-sgmiisys_0", "syscon"
+	- "mediatek,mt7986-sgmiisys_1", "syscon"
 - #clock-cells: Must be 1
 
 The SGMIISYS controller uses the common clk binding from
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
index 5ce7578cf274..b82422bb717f 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
@@ -14,6 +14,7 @@ Required Properties:
 	- "mediatek,mt7622-topckgen"
 	- "mediatek,mt7623-topckgen", "mediatek,mt2701-topckgen"
 	- "mediatek,mt7629-topckgen"
+	- "mediatek,mt7986-topckgen", "syscon"
 	- "mediatek,mt8135-topckgen"
 	- "mediatek,mt8167-topckgen", "syscon"
 	- "mediatek,mt8173-topckgen"
-- 
2.29.2


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [v3,2/9] clk: mediatek: add mt7986 clock IDs
  2021-09-14  8:51 [v3,0/9] Add basic SoC support for mediatek mt7986 Sam Shih
  2021-09-14  8:51 ` [v3,1/9] dt-bindings: clock: mediatek: document clk bindings for mediatek mt7986 SoC Sam Shih
@ 2021-09-14  8:51 ` Sam Shih
  2021-09-14  8:51 ` [RESEND,v2,3/9] clk: mediatek: add mt7986 clock support Sam Shih
                   ` (6 subsequent siblings)
  8 siblings, 0 replies; 34+ messages in thread
From: Sam Shih @ 2021-09-14  8:51 UTC (permalink / raw)
  To: Rob Herring, Sean Wang, Linus Walleij, Matthias Brugger,
	Matt Mackall, Herbert Xu, Greg Kroah-Hartman, Wim Van Sebroeck,
	Guenter Roeck, Michael Turquette, Stephen Boyd, Hsin-Yi Wang,
	Enric Balletbo i Serra, Fabien Parent, Seiya Wang, devicetree,
	linux-kernel, linux-mediatek, linux-gpio, linux-arm-kernel,
	linux-crypto, linux-serial, linux-watchdog, linux-clk
  Cc: John Crispin, Ryder Lee, Sam Shih

Add MT7986 clock dt-bindings, include topckgen, apmixedsys,
infracfg, and ethernet subsystem clocks.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>

---
v3: Fixed SGMII wrong ID and added an Acked-by tag
v2: changed to dual licience
    applied the comment suggested by reviewers:
    - removed 1:1 factor clock
    - renamed factor clock for easier to understand
---
 include/dt-bindings/clock/mt7986-clk.h | 169 +++++++++++++++++++++++++
 1 file changed, 169 insertions(+)
 create mode 100644 include/dt-bindings/clock/mt7986-clk.h

diff --git a/include/dt-bindings/clock/mt7986-clk.h b/include/dt-bindings/clock/mt7986-clk.h
new file mode 100644
index 000000000000..5a9b169324b0
--- /dev/null
+++ b/include/dt-bindings/clock/mt7986-clk.h
@@ -0,0 +1,169 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2021 MediaTek Inc.
+ * Author: Sam Shih <sam.shih@mediatek.com>
+ */
+
+#ifndef _DT_BINDINGS_CLK_MT7986_H
+#define _DT_BINDINGS_CLK_MT7986_H
+
+/* APMIXEDSYS */
+
+#define CLK_APMIXED_ARMPLL		0
+#define CLK_APMIXED_NET2PLL		1
+#define CLK_APMIXED_MMPLL		2
+#define CLK_APMIXED_SGMPLL		3
+#define CLK_APMIXED_WEDMCUPLL		4
+#define CLK_APMIXED_NET1PLL		5
+#define CLK_APMIXED_MPLL		6
+#define CLK_APMIXED_APLL2		7
+
+/* TOPCKGEN */
+
+#define CLK_TOP_XTAL			0
+#define CLK_TOP_XTAL_D2			1
+#define CLK_TOP_RTC_32K			2
+#define CLK_TOP_RTC_32P7K		3
+#define CLK_TOP_MPLL_D2			4
+#define CLK_TOP_MPLL_D4			5
+#define CLK_TOP_MPLL_D8			6
+#define CLK_TOP_MPLL_D8_D2		7
+#define CLK_TOP_MPLL_D3_D2		8
+#define CLK_TOP_MMPLL_D2		9
+#define CLK_TOP_MMPLL_D4		10
+#define CLK_TOP_MMPLL_D8		11
+#define CLK_TOP_MMPLL_D8_D2		12
+#define CLK_TOP_MMPLL_D3_D8		13
+#define CLK_TOP_MMPLL_U2PHY		14
+#define CLK_TOP_APLL2_D4		15
+#define CLK_TOP_NET1PLL_D4		16
+#define CLK_TOP_NET1PLL_D5		17
+#define CLK_TOP_NET1PLL_D5_D2		18
+#define CLK_TOP_NET1PLL_D5_D4		19
+#define CLK_TOP_NET1PLL_D8_D2		20
+#define CLK_TOP_NET1PLL_D8_D4		21
+#define CLK_TOP_NET2PLL_D4		22
+#define CLK_TOP_NET2PLL_D4_D2		23
+#define CLK_TOP_NET2PLL_D3_D2		24
+#define CLK_TOP_WEDMCUPLL_D5_D2		25
+#define CLK_TOP_NFI1X_SEL		26
+#define CLK_TOP_SPINFI_SEL		27
+#define CLK_TOP_SPI_SEL			28
+#define CLK_TOP_SPIM_MST_SEL		29
+#define CLK_TOP_UART_SEL		30
+#define CLK_TOP_PWM_SEL			31
+#define CLK_TOP_I2C_SEL			32
+#define CLK_TOP_PEXTP_TL_SEL		33
+#define CLK_TOP_EMMC_250M_SEL		34
+#define CLK_TOP_EMMC_416M_SEL		35
+#define CLK_TOP_F_26M_ADC_SEL		36
+#define CLK_TOP_DRAMC_SEL		37
+#define CLK_TOP_DRAMC_MD32_SEL		38
+#define CLK_TOP_SYSAXI_SEL		39
+#define CLK_TOP_SYSAPB_SEL		40
+#define CLK_TOP_ARM_DB_MAIN_SEL		41
+#define CLK_TOP_ARM_DB_JTSEL		42
+#define CLK_TOP_NETSYS_SEL		43
+#define CLK_TOP_NETSYS_500M_SEL		44
+#define CLK_TOP_NETSYS_MCU_SEL		45
+#define CLK_TOP_NETSYS_2X_SEL		46
+#define CLK_TOP_SGM_325M_SEL		47
+#define CLK_TOP_SGM_REG_SEL		48
+#define CLK_TOP_A1SYS_SEL		49
+#define CLK_TOP_CONN_MCUSYS_SEL		50
+#define CLK_TOP_EIP_B_SEL		51
+#define CLK_TOP_PCIE_PHY_SEL		52
+#define CLK_TOP_USB3_PHY_SEL		53
+#define CLK_TOP_F26M_SEL		54
+#define CLK_TOP_AUD_L_SEL		55
+#define CLK_TOP_A_TUNER_SEL		56
+#define CLK_TOP_U2U3_SEL		57
+#define CLK_TOP_U2U3_SYS_SEL		58
+#define CLK_TOP_U2U3_XHCI_SEL		59
+#define CLK_TOP_DA_U2_REFSEL		60
+#define CLK_TOP_DA_U2_CK_1P_SEL		61
+#define CLK_TOP_AP2CNN_HOST_SEL		62
+#define CLK_TOP_JTAG			63
+
+/* INFRACFG */
+
+#define CLK_INFRA_SYSAXI_D2		0
+#define CLK_INFRA_UART0_SEL		1
+#define CLK_INFRA_UART1_SEL		2
+#define CLK_INFRA_UART2_SEL		3
+#define CLK_INFRA_SPI0_SEL		4
+#define CLK_INFRA_SPI1_SEL		5
+#define CLK_INFRA_PWM1_SEL		6
+#define CLK_INFRA_PWM2_SEL		7
+#define CLK_INFRA_PWM_BSEL		8
+#define CLK_INFRA_PCIE_SEL		9
+#define CLK_INFRA_GPT_STA		10
+#define CLK_INFRA_PWM_HCK		11
+#define CLK_INFRA_PWM_STA		12
+#define CLK_INFRA_PWM1_CK		13
+#define CLK_INFRA_PWM2_CK		14
+#define CLK_INFRA_CQ_DMA_CK		15
+#define CLK_INFRA_EIP97_CK		16
+#define CLK_INFRA_AUD_BUS_CK		17
+#define CLK_INFRA_AUD_26M_CK		18
+#define CLK_INFRA_AUD_L_CK		19
+#define CLK_INFRA_AUD_AUD_CK		20
+#define CLK_INFRA_AUD_EG2_CK		21
+#define CLK_INFRA_DRAMC_26M_CK		22
+#define CLK_INFRA_DBG_CK		23
+#define CLK_INFRA_AP_DMA_CK		24
+#define CLK_INFRA_SEJ_CK		25
+#define CLK_INFRA_SEJ_13M_CK		26
+#define CLK_INFRA_THERM_CK		27
+#define CLK_INFRA_I2C0_CK		28
+#define CLK_INFRA_UART0_CK		29
+#define CLK_INFRA_UART1_CK		30
+#define CLK_INFRA_UART2_CK		31
+#define CLK_INFRA_NFI1_CK		32
+#define CLK_INFRA_SPINFI1_CK		33
+#define CLK_INFRA_NFI_HCK_CK		34
+#define CLK_INFRA_SPI0_CK		35
+#define CLK_INFRA_SPI1_CK		36
+#define CLK_INFRA_SPI0_HCK_CK		37
+#define CLK_INFRA_SPI1_HCK_CK		38
+#define CLK_INFRA_FRTC_CK		39
+#define CLK_INFRA_MSDC_CK		40
+#define CLK_INFRA_MSDC_HCK_CK		41
+#define CLK_INFRA_MSDC_133M_CK		42
+#define CLK_INFRA_MSDC_66M_CK		43
+#define CLK_INFRA_ADC_26M_CK		44
+#define CLK_INFRA_ADC_FRC_CK		45
+#define CLK_INFRA_FBIST2FPC_CK		46
+#define CLK_INFRA_IUSB_133_CK		47
+#define CLK_INFRA_IUSB_66M_CK		48
+#define CLK_INFRA_IUSB_SYS_CK		49
+#define CLK_INFRA_IUSB_CK		50
+#define CLK_INFRA_IPCIE_CK		51
+#define CLK_INFRA_IPCIE_PIPE_CK		52
+#define CLK_INFRA_IPCIER_CK		53
+#define CLK_INFRA_IPCIEB_CK		54
+#define CLK_INFRA_TRNG_CK		55
+
+/* SGMIISYS_0 */
+
+#define CLK_SGMII0_TX250M_EN		0
+#define CLK_SGMII0_RX250M_EN		1
+#define CLK_SGMII0_CDR_REF		2
+#define CLK_SGMII0_CDR_FB		3
+
+/* SGMIISYS_1 */
+
+#define CLK_SGMII1_TX250M_EN		0
+#define CLK_SGMII1_RX250M_EN		1
+#define CLK_SGMII1_CDR_REF		2
+#define CLK_SGMII1_CDR_FB		3
+
+/* ETHSYS */
+
+#define CLK_ETH_FE_EN			0
+#define CLK_ETH_GP2_EN			1
+#define CLK_ETH_GP1_EN			2
+#define CLK_ETH_WOCPU1_EN		3
+#define CLK_ETH_WOCPU0_EN		4
+
+#endif /* _DT_BINDINGS_CLK_MT7986_H */
-- 
2.29.2


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [RESEND,v2,3/9] clk: mediatek: add mt7986 clock support
  2021-09-14  8:51 [v3,0/9] Add basic SoC support for mediatek mt7986 Sam Shih
  2021-09-14  8:51 ` [v3,1/9] dt-bindings: clock: mediatek: document clk bindings for mediatek mt7986 SoC Sam Shih
  2021-09-14  8:51 ` [v3,2/9] clk: mediatek: add mt7986 clock IDs Sam Shih
@ 2021-09-14  8:51 ` Sam Shih
  2021-09-14  8:51 ` [RESEND,v3,4/9] pinctrl: mediatek: moore: check if pin_desc is valid before use Sam Shih
                   ` (5 subsequent siblings)
  8 siblings, 0 replies; 34+ messages in thread
From: Sam Shih @ 2021-09-14  8:51 UTC (permalink / raw)
  To: Rob Herring, Sean Wang, Linus Walleij, Matthias Brugger,
	Matt Mackall, Herbert Xu, Greg Kroah-Hartman, Wim Van Sebroeck,
	Guenter Roeck, Michael Turquette, Stephen Boyd, Hsin-Yi Wang,
	Enric Balletbo i Serra, Fabien Parent, Seiya Wang, devicetree,
	linux-kernel, linux-mediatek, linux-gpio, linux-arm-kernel,
	linux-crypto, linux-serial, linux-watchdog, linux-clk
  Cc: John Crispin, Ryder Lee, Sam Shih

Add MT7986 clock support, include topckgen, apmixedsys,
infracfg, and ethernet subsystem clocks.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>

---
v2: applied the comment suggested by reviewers:
    - splited basic clock driver to apmixed, topckgen, and infracfg
    - removed 1:1 factor clock
    - renamed factor clock for easier to understand
---
 drivers/clk/mediatek/Kconfig               |  17 ++
 drivers/clk/mediatek/Makefile              |   4 +
 drivers/clk/mediatek/clk-mt7986-apmixed.c  |  78 +++++
 drivers/clk/mediatek/clk-mt7986-eth.c      | 132 +++++++++
 drivers/clk/mediatek/clk-mt7986-infracfg.c | 198 +++++++++++++
 drivers/clk/mediatek/clk-mt7986-topckgen.c | 319 +++++++++++++++++++++
 6 files changed, 748 insertions(+)
 create mode 100644 drivers/clk/mediatek/clk-mt7986-apmixed.c
 create mode 100644 drivers/clk/mediatek/clk-mt7986-eth.c
 create mode 100644 drivers/clk/mediatek/clk-mt7986-infracfg.c
 create mode 100644 drivers/clk/mediatek/clk-mt7986-topckgen.c

diff --git a/drivers/clk/mediatek/Kconfig b/drivers/clk/mediatek/Kconfig
index 439b7c8d0d07..f5f0c0c1012a 100644
--- a/drivers/clk/mediatek/Kconfig
+++ b/drivers/clk/mediatek/Kconfig
@@ -344,6 +344,23 @@ config COMMON_CLK_MT7629_HIFSYS
 	  This driver supports MediaTek MT7629 HIFSYS clocks providing
 	  to PCI-E and USB.
 
+config COMMON_CLK_MT7986
+	bool "Clock driver for MediaTek MT7986"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	select COMMON_CLK_MEDIATEK
+	default ARCH_MEDIATEK
+	help
+	  This driver supports MediaTek MT7986 basic clocks and clocks
+	  required for various periperals found on MediaTek.
+
+config COMMON_CLK_MT7986_ETHSYS
+	bool "Clock driver for MediaTek MT7986 ETHSYS"
+	depends on COMMON_CLK_MT7986
+	default COMMON_CLK_MT7986
+	help
+	  This driver add support for clocks for Ethernet and SGMII
+	  required on MediaTek MT7986 SoC.
+
 config COMMON_CLK_MT8135
 	bool "Clock driver for MediaTek MT8135"
 	depends on (ARCH_MEDIATEK && ARM) || COMPILE_TEST
diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile
index 15bc045f0b71..fec514413c98 100644
--- a/drivers/clk/mediatek/Makefile
+++ b/drivers/clk/mediatek/Makefile
@@ -46,6 +46,10 @@ obj-$(CONFIG_COMMON_CLK_MT7622_AUDSYS) += clk-mt7622-aud.o
 obj-$(CONFIG_COMMON_CLK_MT7629) += clk-mt7629.o
 obj-$(CONFIG_COMMON_CLK_MT7629_ETHSYS) += clk-mt7629-eth.o
 obj-$(CONFIG_COMMON_CLK_MT7629_HIFSYS) += clk-mt7629-hif.o
+obj-$(CONFIG_COMMON_CLK_MT7986) += clk-mt7986-apmixed.o
+obj-$(CONFIG_COMMON_CLK_MT7986) += clk-mt7986-topckgen.o
+obj-$(CONFIG_COMMON_CLK_MT7986) += clk-mt7986-infracfg.o
+obj-$(CONFIG_COMMON_CLK_MT7986_ETHSYS) += clk-mt7986-eth.o
 obj-$(CONFIG_COMMON_CLK_MT8135) += clk-mt8135.o
 obj-$(CONFIG_COMMON_CLK_MT8167) += clk-mt8167.o
 obj-$(CONFIG_COMMON_CLK_MT8167_AUDSYS) += clk-mt8167-aud.o
diff --git a/drivers/clk/mediatek/clk-mt7986-apmixed.c b/drivers/clk/mediatek/clk-mt7986-apmixed.c
new file mode 100644
index 000000000000..0925d61b55f2
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt7986-apmixed.c
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-1.0
+/*
+ * Copyright (c) 2021 MediaTek Inc.
+ * Author: Sam Shih <sam.shih@mediatek.com>
+ * Author: Wenzhen Yu <wenzhen.yu@mediatek.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include "clk-mtk.h"
+#include "clk-gate.h"
+#include "clk-mux.h"
+
+#include <dt-bindings/clock/mt7986-clk.h>
+#include <linux/clk.h>
+
+#define MT7986_PLL_FMAX (2500UL * MHZ)
+#define CON0_MT7986_RST_BAR BIT(27)
+
+#define PLL_xtal(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits,       \
+		 _pd_reg, _pd_shift, _tuner_reg, _pcw_reg, _pcw_shift,         \
+		 _div_table, _parent_name)                                     \
+	{                                                                      \
+		.id = _id, .name = _name, .reg = _reg, .pwr_reg = _pwr_reg,    \
+		.en_mask = _en_mask, .flags = _flags,                          \
+		.rst_bar_mask = CON0_MT7986_RST_BAR, .fmax = MT7986_PLL_FMAX,  \
+		.pcwbits = _pcwbits, .pd_reg = _pd_reg, .pd_shift = _pd_shift, \
+		.tuner_reg = _tuner_reg, .pcw_reg = _pcw_reg,                  \
+		.pcw_shift = _pcw_shift, .div_table = _div_table,              \
+		.parent_name = _parent_name,                                   \
+	}
+
+#define PLL(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits, _pd_reg,   \
+	    _pd_shift, _tuner_reg, _pcw_reg, _pcw_shift)                       \
+	PLL_xtal(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits,       \
+		 _pd_reg, _pd_shift, _tuner_reg, _pcw_reg, _pcw_shift, NULL,   \
+		 "clkxtal")
+
+static const struct mtk_pll_data plls[] = {
+	PLL(CLK_APMIXED_ARMPLL, "armpll", 0x0200, 0x020C, 0x00000001, 0, 32,
+	    0x0200, 4, 0, 0x0204, 0),
+	PLL(CLK_APMIXED_NET2PLL, "net2pll", 0x0210, 0x021C, 0x00000001, 0, 32,
+	    0x0210, 4, 0, 0x0214, 0),
+	PLL(CLK_APMIXED_MMPLL, "mmpll", 0x0220, 0x022C, 0x00000001, 0, 32,
+	    0x0220, 4, 0, 0x0224, 0),
+	PLL(CLK_APMIXED_SGMPLL, "sgmpll", 0x0230, 0x023c, 0x00000001, 0, 32,
+	    0x0230, 4, 0, 0x0234, 0),
+	PLL(CLK_APMIXED_WEDMCUPLL, "wedmcupll", 0x0240, 0x024c, 0x00000001, 0,
+	    32, 0x0240, 4, 0, 0x0244, 0),
+	PLL(CLK_APMIXED_NET1PLL, "net1pll", 0x0250, 0x025c, 0x00000001, 0, 32,
+	    0x0250, 4, 0, 0x0254, 0),
+	PLL(CLK_APMIXED_MPLL, "mpll", 0x0260, 0x0270, 0x00000001, 0, 32, 0x0260,
+	    4, 0, 0x0264, 0),
+	PLL(CLK_APMIXED_APLL2, "apll2", 0x0278, 0x0288, 0x00000001, 0, 32,
+	    0x0278, 4, 0, 0x027c, 0),
+};
+
+static void __init mtk_apmixedsys_init(struct device_node *node)
+{
+	struct clk_onecell_data *clk_data;
+	int r;
+
+	clk_data = mtk_alloc_clk_data(ARRAY_SIZE(plls));
+
+	mtk_clk_register_plls(node, plls, ARRAY_SIZE(plls), clk_data);
+
+	clk_prepare_enable(clk_data->clks[CLK_APMIXED_ARMPLL]);
+
+	r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+	if (r)
+		pr_err("%s(): could not register clock provider: %d\n",
+		       __func__, r);
+}
+CLK_OF_DECLARE(mtk_apmixedsys, "mediatek,mt7986-apmixedsys",
+	       mtk_apmixedsys_init);
diff --git a/drivers/clk/mediatek/clk-mt7986-eth.c b/drivers/clk/mediatek/clk-mt7986-eth.c
new file mode 100644
index 000000000000..495d023ccad7
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt7986-eth.c
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021 MediaTek Inc.
+ * Author: Sam Shih <sam.shih@mediatek.com>
+ * Author: Wenzhen Yu <wenzhen.yu@mediatek.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mt7986-clk.h>
+
+static const struct mtk_gate_regs sgmii0_cg_regs = {
+	.set_ofs = 0xe4,
+	.clr_ofs = 0xe4,
+	.sta_ofs = 0xe4,
+};
+
+#define GATE_SGMII0(_id, _name, _parent, _shift)                               \
+	{                                                                      \
+		.id = _id, .name = _name, .parent_name = _parent,              \
+		.regs = &sgmii0_cg_regs, .shift = _shift,                      \
+		.ops = &mtk_clk_gate_ops_no_setclr_inv,                        \
+	}
+
+static const struct mtk_gate sgmii0_clks[] __initconst = {
+	GATE_SGMII0(CLK_SGMII0_TX250M_EN, "sgmii0_tx250m_en", "top_xtal", 2),
+	GATE_SGMII0(CLK_SGMII0_RX250M_EN, "sgmii0_rx250m_en", "top_xtal", 3),
+	GATE_SGMII0(CLK_SGMII0_CDR_REF, "sgmii0_cdr_ref", "top_xtal", 4),
+	GATE_SGMII0(CLK_SGMII0_CDR_FB, "sgmii0_cdr_fb", "top_xtal", 5),
+};
+
+static const struct mtk_gate_regs sgmii1_cg_regs = {
+	.set_ofs = 0xe4,
+	.clr_ofs = 0xe4,
+	.sta_ofs = 0xe4,
+};
+
+#define GATE_SGMII1(_id, _name, _parent, _shift)                               \
+	{                                                                      \
+		.id = _id, .name = _name, .parent_name = _parent,              \
+		.regs = &sgmii1_cg_regs, .shift = _shift,                      \
+		.ops = &mtk_clk_gate_ops_no_setclr_inv,                        \
+	}
+
+static const struct mtk_gate sgmii1_clks[] __initconst = {
+	GATE_SGMII1(CLK_SGMII1_TX250M_EN, "sgmii1_tx250m_en", "top_xtal", 2),
+	GATE_SGMII1(CLK_SGMII1_RX250M_EN, "sgmii1_rx250m_en", "top_xtal", 3),
+	GATE_SGMII1(CLK_SGMII1_CDR_REF, "sgmii1_cdr_ref", "top_xtal", 4),
+	GATE_SGMII1(CLK_SGMII1_CDR_FB, "sgmii1_cdr_fb", "top_xtal", 5),
+};
+
+static const struct mtk_gate_regs eth_cg_regs = {
+	.set_ofs = 0x30,
+	.clr_ofs = 0x30,
+	.sta_ofs = 0x30,
+};
+
+#define GATE_ETH(_id, _name, _parent, _shift)                                  \
+	{                                                                      \
+		.id = _id, .name = _name, .parent_name = _parent,              \
+		.regs = &eth_cg_regs, .shift = _shift,                         \
+		.ops = &mtk_clk_gate_ops_no_setclr_inv,                        \
+	}
+
+static const struct mtk_gate eth_clks[] __initconst = {
+	GATE_ETH(CLK_ETH_FE_EN, "eth_fe_en", "netsys_2x_sel", 6),
+	GATE_ETH(CLK_ETH_GP2_EN, "eth_gp2_en", "sgm_325m_sel", 7),
+	GATE_ETH(CLK_ETH_GP1_EN, "eth_gp1_en", "sgm_325m_sel", 8),
+	GATE_ETH(CLK_ETH_WOCPU1_EN, "eth_wocpu1_en", "netsys_mcu_sel", 14),
+	GATE_ETH(CLK_ETH_WOCPU0_EN, "eth_wocpu0_en", "netsys_mcu_sel", 15),
+};
+
+static void __init mtk_sgmiisys_0_init(struct device_node *node)
+{
+	struct clk_onecell_data *clk_data;
+	int r;
+
+	clk_data = mtk_alloc_clk_data(ARRAY_SIZE(sgmii0_clks));
+
+	mtk_clk_register_gates(node, sgmii0_clks, ARRAY_SIZE(sgmii0_clks),
+			       clk_data);
+
+	r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+	if (r)
+		pr_err("%s(): could not register clock provider: %d\n",
+		       __func__, r);
+}
+CLK_OF_DECLARE(mtk_sgmiisys_0, "mediatek,mt7986-sgmiisys_0",
+	       mtk_sgmiisys_0_init);
+
+static void __init mtk_sgmiisys_1_init(struct device_node *node)
+{
+	struct clk_onecell_data *clk_data;
+	int r;
+
+	clk_data = mtk_alloc_clk_data(ARRAY_SIZE(sgmii1_clks));
+
+	mtk_clk_register_gates(node, sgmii1_clks, ARRAY_SIZE(sgmii1_clks),
+			       clk_data);
+
+	r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+	if (r)
+		pr_err("%s(): could not register clock provider: %d\n",
+		       __func__, r);
+}
+CLK_OF_DECLARE(mtk_sgmiisys_1, "mediatek,mt7986-sgmiisys_1",
+	       mtk_sgmiisys_1_init);
+
+static void __init mtk_ethsys_init(struct device_node *node)
+{
+	struct clk_onecell_data *clk_data;
+	int r;
+
+	clk_data = mtk_alloc_clk_data(ARRAY_SIZE(eth_clks));
+
+	mtk_clk_register_gates(node, eth_clks, ARRAY_SIZE(eth_clks), clk_data);
+
+	r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+	if (r)
+		pr_err("%s(): could not register clock provider: %d\n",
+		       __func__, r);
+}
+CLK_OF_DECLARE(mtk_ethsys, "mediatek,mt7986-ethsys_ck", mtk_ethsys_init);
diff --git a/drivers/clk/mediatek/clk-mt7986-infracfg.c b/drivers/clk/mediatek/clk-mt7986-infracfg.c
new file mode 100644
index 000000000000..35e16c28966a
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt7986-infracfg.c
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-1.0
+/*
+ * Copyright (c) 2021 MediaTek Inc.
+ * Author: Sam Shih <sam.shih@mediatek.com>
+ * Author: Wenzhen Yu <wenzhen.yu@mediatek.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include "clk-mtk.h"
+#include "clk-gate.h"
+#include "clk-mux.h"
+
+#include <dt-bindings/clock/mt7986-clk.h>
+#include <linux/clk.h>
+
+static DEFINE_SPINLOCK(mt7986_clk_lock);
+
+static const struct mtk_fixed_factor infra_divs[] __initconst = {
+	FACTOR(CLK_INFRA_SYSAXI_D2, "infra_sysaxi_d2", "sysaxi_sel", 1, 2),
+};
+
+static const char *const infra_uart_parent[] __initconst = { "csw_f26m_sel",
+							     "uart_sel" };
+
+static const char *const infra_spi_parents[] __initconst = { "i2c_sel",
+							     "spi_sel" };
+
+static const char *const infra_pwm_bsel_parents[] __initconst = {
+	"top_rtc_32p7k", "csw_f26m_sel", "infra_sysaxi_d2", "pwm_sel"
+};
+
+static const char *const infra_pcie_parents[] __initconst = {
+	"top_rtc_32p7k", "csw_f26m_sel", "top_xtal", "pextp_tl_ck_sel"
+};
+
+static const struct mtk_mux infra_muxes[] = {
+	/* MODULE_CLK_SEL_0 */
+	MUX_GATE_CLR_SET_UPD(CLK_INFRA_UART0_SEL, "infra_uart0_sel",
+			     infra_uart_parent, 0x0018, 0x0010, 0x0014, 0, 1,
+			     -1, -1, -1),
+	MUX_GATE_CLR_SET_UPD(CLK_INFRA_UART1_SEL, "infra_uart1_sel",
+			     infra_uart_parent, 0x0018, 0x0010, 0x0014, 1, 1,
+			     -1, -1, -1),
+	MUX_GATE_CLR_SET_UPD(CLK_INFRA_UART2_SEL, "infra_uart2_sel",
+			     infra_uart_parent, 0x0018, 0x0010, 0x0014, 2, 1,
+			     -1, -1, -1),
+	MUX_GATE_CLR_SET_UPD(CLK_INFRA_SPI0_SEL, "infra_spi0_sel",
+			     infra_spi_parents, 0x0018, 0x0010, 0x0014, 4, 1,
+			     -1, -1, -1),
+	MUX_GATE_CLR_SET_UPD(CLK_INFRA_SPI1_SEL, "infra_spi1_sel",
+			     infra_spi_parents, 0x0018, 0x0010, 0x0014, 5, 1,
+			     -1, -1, -1),
+	MUX_GATE_CLR_SET_UPD(CLK_INFRA_PWM1_SEL, "infra_pwm1_sel",
+			     infra_pwm_bsel_parents, 0x0018, 0x0010, 0x0014, 9,
+			     2, -1, -1, -1),
+	MUX_GATE_CLR_SET_UPD(CLK_INFRA_PWM2_SEL, "infra_pwm2_sel",
+			     infra_pwm_bsel_parents, 0x0018, 0x0010, 0x0014, 11,
+			     2, -1, -1, -1),
+	MUX_GATE_CLR_SET_UPD(CLK_INFRA_PWM_BSEL, "infra_pwm_bsel",
+			     infra_pwm_bsel_parents, 0x0018, 0x0010, 0x0014, 13,
+			     2, -1, -1, -1),
+	/* MODULE_CLK_SEL_1 */
+	MUX_GATE_CLR_SET_UPD(CLK_INFRA_PCIE_SEL, "infra_pcie_sel",
+			     infra_pcie_parents, 0x0028, 0x0020, 0x0024, 0, 2,
+			     -1, -1, -1),
+};
+
+static const struct mtk_gate_regs infra0_cg_regs = {
+	.set_ofs = 0x40,
+	.clr_ofs = 0x44,
+	.sta_ofs = 0x48,
+};
+
+static const struct mtk_gate_regs infra1_cg_regs = {
+	.set_ofs = 0x50,
+	.clr_ofs = 0x54,
+	.sta_ofs = 0x58,
+};
+
+static const struct mtk_gate_regs infra2_cg_regs = {
+	.set_ofs = 0x60,
+	.clr_ofs = 0x64,
+	.sta_ofs = 0x68,
+};
+
+#define GATE_INFRA0(_id, _name, _parent, _shift)                               \
+	{                                                                      \
+		.id = _id, .name = _name, .parent_name = _parent,              \
+		.regs = &infra0_cg_regs, .shift = _shift,                      \
+		.ops = &mtk_clk_gate_ops_setclr,                               \
+	}
+
+#define GATE_INFRA1(_id, _name, _parent, _shift)                               \
+	{                                                                      \
+		.id = _id, .name = _name, .parent_name = _parent,              \
+		.regs = &infra1_cg_regs, .shift = _shift,                      \
+		.ops = &mtk_clk_gate_ops_setclr,                               \
+	}
+
+#define GATE_INFRA2(_id, _name, _parent, _shift)                               \
+	{                                                                      \
+		.id = _id, .name = _name, .parent_name = _parent,              \
+		.regs = &infra2_cg_regs, .shift = _shift,                      \
+		.ops = &mtk_clk_gate_ops_setclr,                               \
+	}
+
+static const struct mtk_gate infra_clks[] __initconst = {
+	/* INFRA0 */
+	GATE_INFRA0(CLK_INFRA_GPT_STA, "infra_gpt_sta", "infra_sysaxi_d2", 0),
+	GATE_INFRA0(CLK_INFRA_PWM_HCK, "infra_pwm_hck", "infra_sysaxi_d2", 1),
+	GATE_INFRA0(CLK_INFRA_PWM_STA, "infra_pwm_sta", "infra_pwm_bsel", 2),
+	GATE_INFRA0(CLK_INFRA_PWM1_CK, "infra_pwm1", "infra_pwm1_sel", 3),
+	GATE_INFRA0(CLK_INFRA_PWM2_CK, "infra_pwm2", "infra_pwm2_sel", 4),
+	GATE_INFRA0(CLK_INFRA_CQ_DMA_CK, "infra_cq_dma", "sysaxi_sel", 6),
+	GATE_INFRA0(CLK_INFRA_EIP97_CK, "infra_eip97", "eip_b_sel", 7),
+	GATE_INFRA0(CLK_INFRA_AUD_BUS_CK, "infra_aud_bus", "sysaxi_sel", 8),
+	GATE_INFRA0(CLK_INFRA_AUD_26M_CK, "infra_aud_26m", "csw_f26m_sel", 9),
+	GATE_INFRA0(CLK_INFRA_AUD_L_CK, "infra_aud_l", "aud_l_sel", 10),
+	GATE_INFRA0(CLK_INFRA_AUD_AUD_CK, "infra_aud_aud", "a1sys_sel", 11),
+	GATE_INFRA0(CLK_INFRA_AUD_EG2_CK, "infra_aud_eg2", "a_tuner_sel", 13),
+	GATE_INFRA0(CLK_INFRA_DRAMC_26M_CK, "infra_dramc_26m", "csw_f26m_sel",
+		    14),
+	GATE_INFRA0(CLK_INFRA_DBG_CK, "infra_dbg", "infra_sysaxi_d2", 15),
+	GATE_INFRA0(CLK_INFRA_AP_DMA_CK, "infra_ap_dma", "infra_sysaxi_d2", 16),
+	GATE_INFRA0(CLK_INFRA_SEJ_CK, "infra_sej", "infra_sysaxi_d2", 24),
+	GATE_INFRA0(CLK_INFRA_SEJ_13M_CK, "infra_sej_13m", "csw_f26m_sel", 25),
+	GATE_INFRA0(CLK_INFRA_TRNG_CK, "infra_trng", "sysaxi_sel", 26),
+	/* INFRA1 */
+	GATE_INFRA1(CLK_INFRA_THERM_CK, "infra_therm", "csw_f26m_sel", 0),
+	GATE_INFRA1(CLK_INFRA_I2C0_CK, "infra_i2c0", "i2c_sel", 1),
+	GATE_INFRA1(CLK_INFRA_UART0_CK, "infra_uart0", "infra_uart0_sel", 2),
+	GATE_INFRA1(CLK_INFRA_UART1_CK, "infra_uart1", "infra_uart1_sel", 3),
+	GATE_INFRA1(CLK_INFRA_UART2_CK, "infra_uart2", "infra_uart2_sel", 4),
+	GATE_INFRA1(CLK_INFRA_NFI1_CK, "infra_nfi1", "nfi1x_sel", 8),
+	GATE_INFRA1(CLK_INFRA_SPINFI1_CK, "infra_spinfi1", "spinfi_sel", 9),
+	GATE_INFRA1(CLK_INFRA_NFI_HCK_CK, "infra_nfi_hck", "infra_sysaxi_d2",
+		    10),
+	GATE_INFRA1(CLK_INFRA_SPI0_CK, "infra_spi0", "infra_spi0_sel", 11),
+	GATE_INFRA1(CLK_INFRA_SPI1_CK, "infra_spi1", "infra_spi1_sel", 12),
+	GATE_INFRA1(CLK_INFRA_SPI0_HCK_CK, "infra_spi0_hck", "infra_sysaxi_d2",
+		    13),
+	GATE_INFRA1(CLK_INFRA_SPI1_HCK_CK, "infra_spi1_hck", "infra_sysaxi_d2",
+		    14),
+	GATE_INFRA1(CLK_INFRA_FRTC_CK, "infra_frtc", "top_rtc_32k", 15),
+	GATE_INFRA1(CLK_INFRA_MSDC_CK, "infra_msdc", "emmc_416m_sel", 16),
+	GATE_INFRA1(CLK_INFRA_MSDC_HCK_CK, "infra_msdc_hck", "emmc_250m_sel",
+		    17),
+	GATE_INFRA1(CLK_INFRA_MSDC_133M_CK, "infra_msdc_133m", "sysaxi_sel",
+		    18),
+	GATE_INFRA1(CLK_INFRA_MSDC_66M_CK, "infra_msdc_66m", "infra_sysaxi_d2",
+		    19),
+	GATE_INFRA1(CLK_INFRA_ADC_26M_CK, "infra_adc_26m", "csw_f26m_sel", 20),
+	GATE_INFRA1(CLK_INFRA_ADC_FRC_CK, "infra_adc_frc", "csw_f26m_sel", 21),
+	GATE_INFRA1(CLK_INFRA_FBIST2FPC_CK, "infra_fbist2fpc", "nfi1x_sel", 23),
+	/* INFRA2 */
+	GATE_INFRA2(CLK_INFRA_IUSB_133_CK, "infra_iusb_133", "sysaxi_sel", 0),
+	GATE_INFRA2(CLK_INFRA_IUSB_66M_CK, "infra_iusb_66m", "infra_sysaxi_d2",
+		    1),
+	GATE_INFRA2(CLK_INFRA_IUSB_SYS_CK, "infra_iusb_sys", "u2u3_sys_sel", 2),
+	GATE_INFRA2(CLK_INFRA_IUSB_CK, "infra_iusb", "u2u3_sel", 3),
+	GATE_INFRA2(CLK_INFRA_IPCIE_CK, "infra_ipcie", "pextp_tl_ck_sel", 12),
+	GATE_INFRA2(CLK_INFRA_IPCIE_PIPE_CK, "infra_ipcie_pipe", "top_xtal",
+		    13),
+	GATE_INFRA2(CLK_INFRA_IPCIER_CK, "infra_ipcier", "csw_f26m_sel", 14),
+	GATE_INFRA2(CLK_INFRA_IPCIEB_CK, "infra_ipcieb", "sysaxi_sel", 15),
+};
+
+static void __init mtk_infracfg_init(struct device_node *node)
+{
+	struct clk_onecell_data *clk_data;
+	int r;
+	void __iomem *base;
+	int nr = ARRAY_SIZE(infra_divs) + ARRAY_SIZE(infra_muxes) +
+		 ARRAY_SIZE(infra_clks);
+
+	base = of_iomap(node, 0);
+	if (!base) {
+		pr_err("%s(): ioremap failed\n", __func__);
+		return;
+	}
+
+	clk_data = mtk_alloc_clk_data(nr);
+	mtk_clk_register_factors(infra_divs, ARRAY_SIZE(infra_divs), clk_data);
+	mtk_clk_register_muxes(infra_muxes, ARRAY_SIZE(infra_muxes), node,
+			       &mt7986_clk_lock, clk_data);
+	mtk_clk_register_gates(node, infra_clks, ARRAY_SIZE(infra_clks),
+			       clk_data);
+
+	r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+	if (r)
+		pr_err("%s(): could not register clock provider: %d\n",
+		       __func__, r);
+}
+CLK_OF_DECLARE(mtk_infracfg, "mediatek,mt7986-infracfg", mtk_infracfg_init);
diff --git a/drivers/clk/mediatek/clk-mt7986-topckgen.c b/drivers/clk/mediatek/clk-mt7986-topckgen.c
new file mode 100644
index 000000000000..0a376044d290
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt7986-topckgen.c
@@ -0,0 +1,319 @@
+// SPDX-License-Identifier: GPL-1.0
+/*
+ * Copyright (c) 2021 MediaTek Inc.
+ * Author: Sam Shih <sam.shih@mediatek.com>
+ * Author: Wenzhen Yu <wenzhen.yu@mediatek.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include "clk-mtk.h"
+#include "clk-gate.h"
+#include "clk-mux.h"
+
+#include <dt-bindings/clock/mt7986-clk.h>
+#include <linux/clk.h>
+
+static DEFINE_SPINLOCK(mt7986_clk_lock);
+
+static const struct mtk_fixed_clk top_fixed_clks[] = {
+	FIXED_CLK(CLK_TOP_XTAL, "top_xtal", "clkxtal", 40000000),
+	FIXED_CLK(CLK_TOP_JTAG, "top_jtag", "clkxtal", 50000000),
+};
+
+static const struct mtk_fixed_factor top_divs[] __initconst = {
+	/* XTAL */
+	FACTOR(CLK_TOP_XTAL_D2, "top_xtal_d2", "top_xtal", 1, 2),
+	FACTOR(CLK_TOP_RTC_32K, "top_rtc_32k", "top_xtal", 1, 1250),
+	FACTOR(CLK_TOP_RTC_32P7K, "top_rtc_32p7k", "top_xtal", 1, 1220),
+	/* MPLL */
+	FACTOR(CLK_TOP_MPLL_D2, "top_mpll_d2", "mpll", 1, 2),
+	FACTOR(CLK_TOP_MPLL_D4, "top_mpll_d4", "mpll", 1, 4),
+	FACTOR(CLK_TOP_MPLL_D8, "top_mpll_d8", "mpll", 1, 8),
+	FACTOR(CLK_TOP_MPLL_D8_D2, "top_mpll_d8_d2", "mpll", 1, 16),
+	FACTOR(CLK_TOP_MPLL_D3_D2, "top_mpll_d3_d2", "mpll", 1, 6),
+	/* MMPLL */
+	FACTOR(CLK_TOP_MMPLL_D2, "top_mmpll_d2", "mmpll", 1, 2),
+	FACTOR(CLK_TOP_MMPLL_D4, "top_mmpll_d4", "mmpll", 1, 4),
+	FACTOR(CLK_TOP_MMPLL_D8, "top_mmpll_d8", "mmpll", 1, 8),
+	FACTOR(CLK_TOP_MMPLL_D8_D2, "top_mmpll_d8_d2", "mmpll", 1, 16),
+	FACTOR(CLK_TOP_MMPLL_D3_D8, "top_mmpll_d3_d8", "mmpll", 1, 24),
+	FACTOR(CLK_TOP_MMPLL_U2PHY, "top_mmpll_u2phy", "mmpll", 1, 30),
+	/* APLL2 */
+	FACTOR(CLK_TOP_APLL2_D4, "top_apll2_d4", "apll2", 1, 4),
+	/* NET1PLL */
+	FACTOR(CLK_TOP_NET1PLL_D4, "top_net1pll_d4", "net1pll", 1, 4),
+	FACTOR(CLK_TOP_NET1PLL_D5, "top_net1pll_d5", "net1pll", 1, 5),
+	FACTOR(CLK_TOP_NET1PLL_D5_D2, "top_net1pll_d5_d2", "net1pll", 1, 10),
+	FACTOR(CLK_TOP_NET1PLL_D5_D4, "top_net1pll_d5_d4", "net1pll", 1, 20),
+	FACTOR(CLK_TOP_NET1PLL_D8_D2, "top_net1pll_d8_d2", "net1pll", 1, 16),
+	FACTOR(CLK_TOP_NET1PLL_D8_D4, "top_net1pll_d8_d4", "net1pll", 1, 32),
+	/* NET2PLL */
+	FACTOR(CLK_TOP_NET2PLL_D4, "top_net2pll_d4", "net2pll", 1, 4),
+	FACTOR(CLK_TOP_NET2PLL_D4_D2, "top_net2pll_d4_d2", "net2pll", 1, 8),
+	FACTOR(CLK_TOP_NET2PLL_D3_D2, "top_net2pll_d3_d2", "net2pll", 1, 2),
+	/* WEDMCUPLL */
+	FACTOR(CLK_TOP_WEDMCUPLL_D5_D2, "top_wedmcupll_d5_d2", "wedmcupll", 1,
+	       10),
+};
+
+static const char *const nfi1x_parents[] __initconst = { "top_xtal",
+							 "top_mmpll_d8",
+							 "top_net1pll_d8_d2",
+							 "top_net2pll_d3_d2",
+							 "top_mpll_d4",
+							 "top_mmpll_d8_d2",
+							 "top_wedmcupll_d5_d2",
+							 "top_mpll_d8" };
+
+static const char *const spinfi_parents[] __initconst = {
+	"top_xtal_d2",     "top_xtal",	"top_net1pll_d5_d4",
+	"top_mpll_d4",     "top_mmpll_d8_d2", "top_wedmcupll_d5_d2",
+	"top_mmpll_d3_d8", "top_mpll_d8"
+};
+
+static const char *const spi_parents[] __initconst = {
+	"top_xtal",	  "top_mpll_d2",	"top_mmpll_d8",
+	"top_net1pll_d8_d2", "top_net2pll_d3_d2",  "top_net1pll_d5_d4",
+	"top_mpll_d4",       "top_wedmcupll_d5_d2"
+};
+
+static const char *const uart_parents[] __initconst = { "top_xtal",
+							"top_mpll_d8",
+							"top_mpll_d8_d2" };
+
+static const char *const pwm_parents[] __initconst = {
+	"top_xtal", "top_net1pll_d8_d2", "top_net1pll_d5_d4", "top_mpll_d4"
+};
+
+static const char *const i2c_parents[] __initconst = {
+	"top_xtal", "top_net1pll_d5_d4", "top_mpll_d4", "top_net1pll_d8_d4"
+};
+
+static const char *const pextp_tl_ck_parents[] __initconst = {
+	"top_xtal", "top_net1pll_d5_d4", "top_net2pll_d4_d2", "top_rtc_32k"
+};
+
+static const char *const emmc_250m_parents[] __initconst = {
+	"top_xtal", "top_net1pll_d5_d2"
+};
+
+static const char *const emmc_416m_parents[] __initconst = { "top_xtal",
+							     "mpll" };
+
+static const char *const f_26m_adc_parents[] __initconst = { "top_xtal",
+							     "top_mpll_d8_d2" };
+
+static const char *const dramc_md32_parents[] __initconst = { "top_xtal",
+							      "top_mpll_d2" };
+
+static const char *const sysaxi_parents[] __initconst = { "top_xtal",
+							  "top_net1pll_d8_d2",
+							  "top_net2pll_d4" };
+
+static const char *const sysapb_parents[] __initconst = { "top_xtal",
+							  "top_mpll_d3_d2",
+							  "top_net2pll_d4_d2" };
+
+static const char *const arm_db_main_parents[] __initconst = {
+	"top_xtal", "top_net2pll_d3_d2"
+};
+
+static const char *const arm_db_jtsel_parents[] __initconst = { "top_jtag",
+								"top_xtal" };
+
+static const char *const netsys_parents[] __initconst = { "top_xtal",
+							  "top_mmpll_d4" };
+
+static const char *const netsys_500m_parents[] __initconst = {
+	"top_xtal", "top_net1pll_d5"
+};
+
+static const char *const netsys_mcu_parents[] __initconst = {
+	"top_xtal", "wedmcupll", "top_mmpll_d2", "top_net1pll_d4",
+	"top_net1pll_d5"
+};
+
+static const char *const netsys_2x_parents[] __initconst = {
+	"top_xtal", "net2pll", "wedmcupll", "top_mmpll_d2"
+};
+
+static const char *const sgm_325m_parents[] __initconst = { "top_xtal",
+							    "sgmpll" };
+
+static const char *const sgm_reg_parents[] __initconst = {
+	"top_xtal", "top_net1pll_d8_d4"
+};
+
+static const char *const a1sys_parents[] __initconst = { "top_xtal",
+							 "top_apll2_d4" };
+
+static const char *const conn_mcusys_parents[] __initconst = { "top_xtal",
+							       "top_mmpll_d2" };
+
+static const char *const eip_b_parents[] __initconst = { "top_xtal",
+							 "net2pll" };
+
+static const char *const aud_l_parents[] __initconst = { "top_xtal", "apll2",
+							 "top_mpll_d8_d2" };
+
+static const char *const a_tuner_parents[] __initconst = { "top_xtal",
+							   "top_apll2_d4",
+							   "top_mpll_d8_d2" };
+
+static const char *const u2u3_sys_parents[] __initconst = {
+	"top_xtal", "top_net1pll_d5_d4"
+};
+
+static const char *const da_u2_refsel_parents[] __initconst = {
+	"top_xtal", "top_mmpll_u2phy"
+};
+
+static const struct mtk_mux top_muxes[] = {
+	/* CLK_CFG_0 */
+	MUX_GATE_CLR_SET_UPD(CLK_TOP_NFI1X_SEL, "nfi1x_sel", nfi1x_parents,
+			     0x000, 0x004, 0x008, 0, 3, 7, 0x1C0, 0),
+	MUX_GATE_CLR_SET_UPD(CLK_TOP_SPINFI_SEL, "spinfi_sel", spinfi_parents,
+			     0x000, 0x004, 0x008, 8, 3, 15, 0x1C0, 1),
+	MUX_GATE_CLR_SET_UPD(CLK_TOP_SPI_SEL, "spi_sel", spi_parents, 0x000,
+			     0x004, 0x008, 16, 3, 23, 0x1C0, 2),
+	MUX_GATE_CLR_SET_UPD(CLK_TOP_SPIM_MST_SEL, "spim_mst_sel", spi_parents,
+			     0x000, 0x004, 0x008, 24, 3, 31, 0x1C0, 3),
+	/* CLK_CFG_1 */
+	MUX_GATE_CLR_SET_UPD(CLK_TOP_UART_SEL, "uart_sel", uart_parents, 0x010,
+			     0x014, 0x018, 0, 2, 7, 0x1C0, 4),
+	MUX_GATE_CLR_SET_UPD(CLK_TOP_PWM_SEL, "pwm_sel", pwm_parents, 0x010,
+			     0x014, 0x018, 8, 2, 15, 0x1C0, 5),
+	MUX_GATE_CLR_SET_UPD(CLK_TOP_I2C_SEL, "i2c_sel", i2c_parents, 0x010,
+			     0x014, 0x018, 16, 2, 23, 0x1C0, 6),
+	MUX_GATE_CLR_SET_UPD(CLK_TOP_PEXTP_TL_SEL, "pextp_tl_ck_sel",
+			     pextp_tl_ck_parents, 0x010, 0x014, 0x018, 24, 2,
+			     31, 0x1C0, 7),
+	/* CLK_CFG_2 */
+	MUX_GATE_CLR_SET_UPD(CLK_TOP_EMMC_250M_SEL, "emmc_250m_sel",
+			     emmc_250m_parents, 0x020, 0x024, 0x028, 0, 1, 7,
+			     0x1C0, 8),
+	MUX_GATE_CLR_SET_UPD(CLK_TOP_EMMC_416M_SEL, "emmc_416m_sel",
+			     emmc_416m_parents, 0x020, 0x024, 0x028, 8, 1, 15,
+			     0x1C0, 9),
+	MUX_GATE_CLR_SET_UPD(CLK_TOP_F_26M_ADC_SEL, "f_26m_adc_sel",
+			     f_26m_adc_parents, 0x020, 0x024, 0x028, 16, 1, 23,
+			     0x1C0, 10),
+	MUX_GATE_CLR_SET_UPD(CLK_TOP_DRAMC_SEL, "dramc_sel", f_26m_adc_parents,
+			     0x020, 0x024, 0x028, 24, 1, 31, 0x1C0, 11),
+	/* CLK_CFG_3 */
+	MUX_GATE_CLR_SET_UPD(CLK_TOP_DRAMC_MD32_SEL, "dramc_md32_sel",
+			     dramc_md32_parents, 0x030, 0x034, 0x038, 0, 1, 7,
+			     0x1C0, 12),
+	MUX_GATE_CLR_SET_UPD(CLK_TOP_SYSAXI_SEL, "sysaxi_sel", sysaxi_parents,
+			     0x030, 0x034, 0x038, 8, 2, 15, 0x1C0, 13),
+	MUX_GATE_CLR_SET_UPD(CLK_TOP_SYSAPB_SEL, "sysapb_sel", sysapb_parents,
+			     0x030, 0x034, 0x038, 16, 2, 23, 0x1C0, 14),
+	MUX_GATE_CLR_SET_UPD(CLK_TOP_ARM_DB_MAIN_SEL, "arm_db_main_sel",
+			     arm_db_main_parents, 0x030, 0x034, 0x038, 24, 1,
+			     31, 0x1C0, 15),
+	/* CLK_CFG_4 */
+	MUX_GATE_CLR_SET_UPD(CLK_TOP_ARM_DB_JTSEL, "arm_db_jtsel",
+			     arm_db_jtsel_parents, 0x040, 0x044, 0x048, 0, 1, 7,
+			     0x1C0, 16),
+	MUX_GATE_CLR_SET_UPD(CLK_TOP_NETSYS_SEL, "netsys_sel", netsys_parents,
+			     0x040, 0x044, 0x048, 8, 1, 15, 0x1C0, 17),
+	MUX_GATE_CLR_SET_UPD(CLK_TOP_NETSYS_500M_SEL, "netsys_500m_sel",
+			     netsys_500m_parents, 0x040, 0x044, 0x048, 16, 1,
+			     23, 0x1C0, 18),
+	MUX_GATE_CLR_SET_UPD(CLK_TOP_NETSYS_MCU_SEL, "netsys_mcu_sel",
+			     netsys_mcu_parents, 0x040, 0x044, 0x048, 24, 3, 31,
+			     0x1C0, 19),
+	/* CLK_CFG_5 */
+	MUX_GATE_CLR_SET_UPD(CLK_TOP_NETSYS_2X_SEL, "netsys_2x_sel",
+			     netsys_2x_parents, 0x050, 0x054, 0x058, 0, 2, 7,
+			     0x1C0, 20),
+	MUX_GATE_CLR_SET_UPD(CLK_TOP_SGM_325M_SEL, "sgm_325m_sel",
+			     sgm_325m_parents, 0x050, 0x054, 0x058, 8, 1, 15,
+			     0x1C0, 21),
+	MUX_GATE_CLR_SET_UPD(CLK_TOP_SGM_REG_SEL, "sgm_reg_sel",
+			     sgm_reg_parents, 0x050, 0x054, 0x058, 16, 1, 23,
+			     0x1C0, 22),
+	MUX_GATE_CLR_SET_UPD(CLK_TOP_A1SYS_SEL, "a1sys_sel", a1sys_parents,
+			     0x050, 0x054, 0x058, 24, 1, 31, 0x1C0, 23),
+	/* CLK_CFG_6 */
+	MUX_GATE_CLR_SET_UPD(CLK_TOP_CONN_MCUSYS_SEL, "conn_mcusys_sel",
+			     conn_mcusys_parents, 0x060, 0x064, 0x068, 0, 1, 7,
+			     0x1C0, 24),
+	MUX_GATE_CLR_SET_UPD(CLK_TOP_EIP_B_SEL, "eip_b_sel", eip_b_parents,
+			     0x060, 0x064, 0x068, 8, 1, 15, 0x1C0, 25),
+	MUX_GATE_CLR_SET_UPD(CLK_TOP_PCIE_PHY_SEL, "pcie_phy_sel",
+			     f_26m_adc_parents, 0x060, 0x064, 0x068, 16, 1, 23,
+			     0x1C0, 26),
+	MUX_GATE_CLR_SET_UPD(CLK_TOP_USB3_PHY_SEL, "usb3_phy_sel",
+			     f_26m_adc_parents, 0x060, 0x064, 0x068, 24, 1, 31,
+			     0x1C0, 27),
+	/* CLK_CFG_7 */
+	MUX_GATE_CLR_SET_UPD(CLK_TOP_F26M_SEL, "csw_f26m_sel",
+			     f_26m_adc_parents, 0x070, 0x074, 0x078, 0, 1, 7,
+			     0x1C0, 28),
+	MUX_GATE_CLR_SET_UPD(CLK_TOP_AUD_L_SEL, "aud_l_sel", aud_l_parents,
+			     0x070, 0x074, 0x078, 8, 2, 15, 0x1C0, 29),
+	MUX_GATE_CLR_SET_UPD(CLK_TOP_A_TUNER_SEL, "a_tuner_sel",
+			     a_tuner_parents, 0x070, 0x074, 0x078, 16, 2, 23,
+			     0x1C0, 30),
+	MUX_GATE_CLR_SET_UPD(CLK_TOP_U2U3_SEL, "u2u3_sel", f_26m_adc_parents,
+			     0x070, 0x074, 0x078, 24, 1, 31, 0x1C4, 0),
+	/* CLK_CFG_8 */
+	MUX_GATE_CLR_SET_UPD(CLK_TOP_U2U3_SYS_SEL, "u2u3_sys_sel",
+			     u2u3_sys_parents, 0x080, 0x084, 0x088, 0, 1, 7,
+			     0x1C4, 1),
+	MUX_GATE_CLR_SET_UPD(CLK_TOP_U2U3_XHCI_SEL, "u2u3_xhci_sel",
+			     u2u3_sys_parents, 0x080, 0x084, 0x088, 8, 1, 15,
+			     0x1C4, 2),
+	MUX_GATE_CLR_SET_UPD(CLK_TOP_DA_U2_REFSEL, "da_u2_refsel",
+			     da_u2_refsel_parents, 0x080, 0x084, 0x088, 16, 1,
+			     23, 0x1C4, 3),
+	MUX_GATE_CLR_SET_UPD(CLK_TOP_DA_U2_CK_1P_SEL, "da_u2_ck_1p_sel",
+			     da_u2_refsel_parents, 0x080, 0x084, 0x088, 24, 1,
+			     31, 0x1C4, 4),
+	/* CLK_CFG_9 */
+	MUX_GATE_CLR_SET_UPD(CLK_TOP_AP2CNN_HOST_SEL, "ap2cnn_host_sel",
+			     sgm_reg_parents, 0x090, 0x094, 0x098, 0, 1, 7,
+			     0x1C4, 5),
+};
+
+static void __init mtk_topckgen_init(struct device_node *node)
+{
+	struct clk_onecell_data *clk_data;
+	int r;
+	void __iomem *base;
+	int nr = ARRAY_SIZE(top_fixed_clks) + ARRAY_SIZE(top_divs) +
+		 ARRAY_SIZE(top_muxes);
+
+	base = of_iomap(node, 0);
+	if (!base) {
+		pr_err("%s(): ioremap failed\n", __func__);
+		return;
+	}
+
+	clk_data = mtk_alloc_clk_data(nr);
+
+	mtk_clk_register_fixed_clks(top_fixed_clks, ARRAY_SIZE(top_fixed_clks),
+				    clk_data);
+	mtk_clk_register_factors(top_divs, ARRAY_SIZE(top_divs), clk_data);
+	mtk_clk_register_muxes(top_muxes, ARRAY_SIZE(top_muxes), node,
+			       &mt7986_clk_lock, clk_data);
+
+	clk_prepare_enable(clk_data->clks[CLK_TOP_SYSAXI_SEL]);
+	clk_prepare_enable(clk_data->clks[CLK_TOP_SYSAPB_SEL]);
+	clk_prepare_enable(clk_data->clks[CLK_TOP_DRAMC_SEL]);
+	clk_prepare_enable(clk_data->clks[CLK_TOP_DRAMC_MD32_SEL]);
+	clk_prepare_enable(clk_data->clks[CLK_TOP_F26M_SEL]);
+	clk_prepare_enable(clk_data->clks[CLK_TOP_SGM_REG_SEL]);
+
+	r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+	if (r)
+		pr_err("%s(): could not register clock provider: %d\n",
+		       __func__, r);
+}
+CLK_OF_DECLARE(mtk_topckgen, "mediatek,mt7986-topckgen", mtk_topckgen_init);
-- 
2.29.2


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [RESEND,v3,4/9] pinctrl: mediatek: moore: check if pin_desc is valid before use
  2021-09-14  8:51 [v3,0/9] Add basic SoC support for mediatek mt7986 Sam Shih
                   ` (2 preceding siblings ...)
  2021-09-14  8:51 ` [RESEND,v2,3/9] clk: mediatek: add mt7986 clock support Sam Shih
@ 2021-09-14  8:51 ` Sam Shih
  2021-09-16 10:07   ` Linus Walleij
  2021-09-14  8:51 ` [v3,5/9] dt-bindings: pinctrl: update bindings for MT7986 SoC Sam Shih
                   ` (4 subsequent siblings)
  8 siblings, 1 reply; 34+ messages in thread
From: Sam Shih @ 2021-09-14  8:51 UTC (permalink / raw)
  To: Rob Herring, Sean Wang, Linus Walleij, Matthias Brugger,
	Matt Mackall, Herbert Xu, Greg Kroah-Hartman, Wim Van Sebroeck,
	Guenter Roeck, Michael Turquette, Stephen Boyd, Hsin-Yi Wang,
	Enric Balletbo i Serra, Fabien Parent, Seiya Wang, devicetree,
	linux-kernel, linux-mediatek, linux-gpio, linux-arm-kernel,
	linux-crypto, linux-serial, linux-watchdog, linux-clk
  Cc: John Crispin, Ryder Lee, Sam Shih

Certain SoC are missing the middle part gpios in consecutive pins,
it's better to check if mtk_pin_desc is a valid pin for the extensibility

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Acked-by: Sean Wang <sean.wang@mediatek.com>

---
v3: added an Acked-by tag.
v2: applied the comment suggested by reviewers:
    - for the pins not ballout, we can fill .name in struct mtk_pin_desc
      as NULL and return -ENOTSUPP in gpio/pinconf ops.
---
 drivers/pinctrl/mediatek/pinctrl-moore.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/pinctrl/mediatek/pinctrl-moore.c b/drivers/pinctrl/mediatek/pinctrl-moore.c
index 3a4a23c40a71..ad3b67163973 100644
--- a/drivers/pinctrl/mediatek/pinctrl-moore.c
+++ b/drivers/pinctrl/mediatek/pinctrl-moore.c
@@ -60,6 +60,8 @@ static int mtk_pinmux_set_mux(struct pinctrl_dev *pctldev,
 		int pin = grp->pins[i];
 
 		desc = (const struct mtk_pin_desc *)&hw->soc->pins[pin];
+		if (!desc->name)
+			return -ENOTSUPP;
 
 		mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_MODE,
 				 pin_modes[i]);
@@ -76,6 +78,8 @@ static int mtk_pinmux_gpio_request_enable(struct pinctrl_dev *pctldev,
 	const struct mtk_pin_desc *desc;
 
 	desc = (const struct mtk_pin_desc *)&hw->soc->pins[pin];
+	if (!desc->name)
+		return -ENOTSUPP;
 
 	return mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_MODE,
 				hw->soc->gpio_m);
@@ -89,6 +93,8 @@ static int mtk_pinmux_gpio_set_direction(struct pinctrl_dev *pctldev,
 	const struct mtk_pin_desc *desc;
 
 	desc = (const struct mtk_pin_desc *)&hw->soc->pins[pin];
+	if (!desc->name)
+		return -ENOTSUPP;
 
 	/* hardware would take 0 as input direction */
 	return mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR, !input);
@@ -103,6 +109,8 @@ static int mtk_pinconf_get(struct pinctrl_dev *pctldev,
 	const struct mtk_pin_desc *desc;
 
 	desc = (const struct mtk_pin_desc *)&hw->soc->pins[pin];
+	if (!desc->name)
+		return -ENOTSUPP;
 
 	switch (param) {
 	case PIN_CONFIG_BIAS_DISABLE:
@@ -218,6 +226,8 @@ static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
 	int cfg, err = 0;
 
 	desc = (const struct mtk_pin_desc *)&hw->soc->pins[pin];
+	if (!desc->name)
+		return -ENOTSUPP;
 
 	for (cfg = 0; cfg < num_configs; cfg++) {
 		param = pinconf_to_config_param(configs[cfg]);
@@ -435,6 +445,8 @@ static int mtk_gpio_get(struct gpio_chip *chip, unsigned int gpio)
 	int value, err;
 
 	desc = (const struct mtk_pin_desc *)&hw->soc->pins[gpio];
+	if (!desc->name)
+		return -ENOTSUPP;
 
 	err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DI, &value);
 	if (err)
@@ -449,6 +461,10 @@ static void mtk_gpio_set(struct gpio_chip *chip, unsigned int gpio, int value)
 	const struct mtk_pin_desc *desc;
 
 	desc = (const struct mtk_pin_desc *)&hw->soc->pins[gpio];
+	if (!desc->name) {
+		dev_err(hw->dev, "Failed to set gpio %d\n", gpio);
+		return;
+	}
 
 	mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DO, !!value);
 }
@@ -490,6 +506,8 @@ static int mtk_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
 	u32 debounce;
 
 	desc = (const struct mtk_pin_desc *)&hw->soc->pins[offset];
+	if (!desc->name)
+		return -ENOTSUPP;
 
 	if (!hw->eint ||
 	    pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE ||
-- 
2.29.2


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [v3,5/9] dt-bindings: pinctrl: update bindings for MT7986 SoC
  2021-09-14  8:51 [v3,0/9] Add basic SoC support for mediatek mt7986 Sam Shih
                   ` (3 preceding siblings ...)
  2021-09-14  8:51 ` [RESEND,v3,4/9] pinctrl: mediatek: moore: check if pin_desc is valid before use Sam Shih
@ 2021-09-14  8:51 ` Sam Shih
  2021-09-14 18:00   ` Matthias Brugger
  2021-09-14  8:51 ` [v4,6/9] pinctrl: mediatek: add support " Sam Shih
                   ` (3 subsequent siblings)
  8 siblings, 1 reply; 34+ messages in thread
From: Sam Shih @ 2021-09-14  8:51 UTC (permalink / raw)
  To: Rob Herring, Sean Wang, Linus Walleij, Matthias Brugger,
	Matt Mackall, Herbert Xu, Greg Kroah-Hartman, Wim Van Sebroeck,
	Guenter Roeck, Michael Turquette, Stephen Boyd, Hsin-Yi Wang,
	Enric Balletbo i Serra, Fabien Parent, Seiya Wang, devicetree,
	linux-kernel, linux-mediatek, linux-gpio, linux-arm-kernel,
	linux-crypto, linux-serial, linux-watchdog, linux-clk
  Cc: John Crispin, Ryder Lee, Sam Shih

This updates bindings for MT7986 pinctrl driver. The
difference of pinctrl between mt7986a and mt7986b is that pin-41 to pin-65
do not exist on mt7986b

Signed-off-by: Sam Shih <sam.shih@mediatek.com>

---
v3 : make mt7986 pinctrl bindings as a separate file
v2 : deleted the redundant description of mt7986a/mt7986b
---
 .../pinctrl/mediatek,mt7986-pinctrl.txt       | 300 ++++++++++++++++++
 1 file changed, 300 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.txt

diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.txt
new file mode 100644
index 000000000000..5805e53d5924
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.txt
@@ -0,0 +1,300 @@
+* Mediatek MT7986 Pin Controller
+
+The Mediatek's Pin controller is used to control SoC pins.
+
+Required properties for the root node:
+ - compatible: Should be one of the following
+	       "mediatek,mt7986a-pinctrl" for MT7986a SoC
+	       "mediatek,mt7986b-pinctrl" for MT7986b SoC
+ - gpio-controller: Marks the device node as a GPIO controller.
+ - #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO
+   binding is used, the amount of cells must be specified as 2. See the below
+   mentioned gpio binding representation for description of particular cells.
+ - gpio-ranges : gpio valid number range.
+ - reg: physical address base for gpio base registers. There are 8 GPIO
+   physical address base in mt8183.
+
+Optional properties:
+- reg-names: gpio base register names. There are 8 gpio base register
+  names in mt7986. They are "gpio_base", "iocfg_rt_base", "iocfg_rb_base",
+  "iocfg_lt_base", "iocfg_lb_base", "iocfg_tr_base", "iocfg_tl_base", "eint".
+- interrupt-controller: Marks the device node as an interrupt controller
+
+If the property interrupt-controller is defined, following property is required
+- interrupts : The interrupt outputs to gic.
+- #interrupt-cells: Should be two.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+MT7986 pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as pull-up, drive-strength, etc.
+
+We support 2 types of configuration nodes. Those nodes can be either pinmux
+nodes or pinconf nodes. Each configuration node can consist of multiple nodes
+describing the pinmux and pinconf options.
+
+The name of each subnode doesn't matter as long as it is unique; all subnodes
+should be enumerated and processed purely based on their content.
+
+== pinmux nodes content ==
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pinmux subnode:
+
+Required properties are:
+ - groups: An array of strings. Each string contains the name of a group.
+  Valid values for these names are listed below.
+ - function: A string containing the name of the function to mux to the
+  group. Valid values for function names are listed below.
+
+== pinconf nodes content ==
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pinconf subnode:
+
+Required properties are:
+ - pins: An array of strings. Each string contains the name of a pin.
+  Valid values for these names are listed below.
+ - groups: An array of strings. Each string contains the name of a group.
+  Valid values for these names are listed below.
+
+Optional properies are:
+ - GENERIC_PINCONFIG: is the generic pinconfig options to use, bias-disable,
+   bias-pull-down, bias-pull-up, input-enable, input-disable, output-low,
+   output-high, input-schmitt-enable, input-schmitt-disable
+   and drive-strength are valid.
+  Valid arguments for 'drive-strength': 2, 4, 6, 8, 10, 12, 14, 16 in mA.
+ - mediatek,pull-up-adv
+  Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3'
+  Pull up setings for 2 pull resistors, R0 and R1. User can
+  configure those special pins. Valid arguments are described as below:
+  0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+  1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+  2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+  3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+ - mediatek,pull-down-adv
+  Valid arguments for 'mediatek,pull-down-adv' are '0', '1', '2', '3'
+  Pull down settings for 2 pull resistors, R0 and R1. User can
+  configure those special pins. Valid arguments are described as below:
+  0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+  1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+  2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+  3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+ - mediatek,tdsel: An integer describing the steps for output level shifter duty
+   cycle when asserted (high pulse width adjustment). Valid arguments are from 0
+   to 15.
+ - mediatek,rdsel: An integer describing the steps for input level shifter duty
+   cycle when asserted (high pulse width adjustment). Valid arguments are from 0
+   to 63.
+
+== Valid values for pins, function and groups on MT7986a and MT7986b  ==
+
+Valid values for pins are:
+pins can be referenced via the pin names as the below table shown and the
+related physical number is also put ahead of those names which helps cross
+references to pins between groups to know whether pins assignment conflict
+happens among devices try to acquire those available pins.
+
+There is no PIN 41 to PIN 65 on mt7686b, you can only use those pins on mt7986a.
+
+	Pin #:  Valid values for pins
+	-----------------------------
+	PIN 0: "SYS_WATCHDOG"
+	PIN 1: "WF2G_LED"
+	PIN 2: "WF5G_LED"
+	PIN 3: "I2C_SCL"
+	PIN 4: "I2C_SDA"
+	PIN 5: "GPIO_0"
+	PIN 6: "GPIO_1"
+	PIN 7: "GPIO_2"
+	PIN 8: "GPIO_3"
+	PIN 9: "GPIO_4"
+	PIN 10: "GPIO_5"
+	PIN 11: "GPIO_6"
+	PIN 12: "GPIO_7"
+	PIN 13: "GPIO_8"
+	PIN 14: "GPIO_9"
+	PIN 15: "GPIO_10"
+	PIN 16: "GPIO_11"
+	PIN 17: "GPIO_12"
+	PIN 18: "GPIO_13"
+	PIN 19: "GPIO_14"
+	PIN 20: "GPIO_15"
+	PIN 21: "PWM0"
+	PIN 22: "PWM1"
+	PIN 23: "SPI0_CLK"
+	PIN 24: "SPI0_MOSI"
+	PIN 25: "SPI0_MISO"
+	PIN 26: "SPI0_CS"
+	PIN 27: "SPI0_HOLD"
+	PIN 28: "SPI0_WP"
+	PIN 29: "SPI1_CLK"
+	PIN 30: "SPI1_MOSI"
+	PIN 31: "SPI1_MISO"
+	PIN 32: "SPI1_CS"
+	PIN 33: "SPI2_CLK"
+	PIN 34: "SPI2_MOSI"
+	PIN 35: "SPI2_MISO"
+	PIN 36: "SPI2_CS"
+	PIN 37: "SPI2_HOLD"
+	PIN 38: "SPI2_WP"
+	PIN 39: "UART0_RXD"
+	PIN 40: "UART0_TXD"
+	PIN 41: "PCIE_PERESET_N"
+	PIN 42: "UART1_RXD"
+	PIN 43: "UART1_TXD"
+	PIN 44: "UART1_CTS"
+	PIN 45: "UART1_RTS"
+	PIN 46: "UART2_RXD"
+	PIN 47: "UART2_TXD"
+	PIN 48: "UART2_CTS"
+	PIN 49: "UART2_RTS"
+	PIN 50: "EMMC_DATA_0"
+	PIN 51: "EMMC_DATA_1"
+	PIN 52: "EMMC_DATA_2"
+	PIN 53: "EMMC_DATA_3"
+	PIN 54: "EMMC_DATA_4"
+	PIN 55: "EMMC_DATA_5"
+	PIN 56: "EMMC_DATA_6"
+	PIN 57: "EMMC_DATA_7"
+	PIN 58: "EMMC_CMD"
+	PIN 59: "EMMC_CK"
+	PIN 60: "EMMC_DSL"
+	PIN 61: "EMMC_RSTB"
+	PIN 62: "PCM_DTX"
+	PIN 63: "PCM_DRX"
+	PIN 64: "PCM_CLK"
+	PIN 65: "PCM_FS"
+	PIN 66: "MT7531_INT"
+	PIN 67: "SMI_MDC"
+	PIN 68: "SMI_MDIO"
+	PIN 69: "WF0_DIG_RESETB"
+	PIN 70: "WF0_CBA_RESETB"
+	PIN 71: "WF0_XO_REQ"
+	PIN 72: "WF0_TOP_CLK"
+	PIN 73: "WF0_TOP_DATA"
+	PIN 74: "WF0_HB1"
+	PIN 75: "WF0_HB2"
+	PIN 76: "WF0_HB3"
+	PIN 77: "WF0_HB4"
+	PIN 78: "WF0_HB0"
+	PIN 79: "WF0_HB0_B"
+	PIN 80: "WF0_HB5"
+	PIN 81: "WF0_HB6"
+	PIN 82: "WF0_HB7"
+	PIN 83: "WF0_HB8"
+	PIN 84: "WF0_HB9"
+	PIN 85: "WF0_HB10"
+	PIN 86: "WF1_DIG_RESETB"
+	PIN 87: "WF1_CBA_RESETB"
+	PIN 88: "WF1_XO_REQ"
+	PIN 89: "WF1_TOP_CLK"
+	PIN 90: "WF1_TOP_DATA"
+	PIN 91: "WF1_HB1"
+	PIN 92: "WF1_HB2"
+	PIN 93: "WF1_HB3"
+	PIN 94: "WF1_HB4"
+	PIN 95: "WF1_HB0"
+	PIN 96: "WF1_HB0_B"
+	PIN 97: "WF1_HB5"
+	PIN 98: "WF1_HB6"
+	PIN 99: "WF1_HB7"
+	PIN 100: "WF1_HB8"
+
+Valid values for function are:
+	"audio, "emmc", "eth", "i2c", "wifi", "led", "flash", "pcie",
+	"pwm", "spi", "uart", "watchdog"
+
+There is no "audio", "pcie" functions on mt7986b, you can only use those
+functions on mt7986a.
+
+Valid values for groups are:
+additional data is put followingly with valid value allowing us to know which
+applicable function and which relevant pins (in pin#) are able applied for that
+group.
+
+There is no "pcie_pereset", "uart1", "uart2" "emmc_51", "pcm", and "i2s" groups
+on mt7986b, you can only use those groups on mt7986a.
+
+	Valid value			function	pins (in pin#)
+	-------------------------------------------------------------------------
+	"watchdog"			"watchdog"	0
+	"wifi_led"			"led"		1, 2
+	"i2c"				"i2c"		3, 4
+	"uart1_0"			"uart"		7, 8, 9, 10
+	"pcie_clk"			"pcie"		9
+	"pcie_wake"			"pcie"		10
+	"spi1_0"			"spi"		11, 12, 13, 14
+	"pwm1_1"			"pwm"		20,
+	"pwm0"				"pwm"		21,
+	"pwm1_0"			"pwm"		22,
+	"snfi"				"flash"		23, 24, 25, 26, 27, 28
+	"spi1_2"			"spi"		29, 30, 31, 32
+	"emmc_45"			"emmc"		22, 23, 24, 25, 26, 27,
+							28, 29, 30, 31, 32
+	"spi1_1"			"spi"		23, 24, 25, 26
+	"uart1_2"			"uart"		29, 30, 31, 32
+	"uart1_1"			"uart"		23, 24, 25, 26
+	"uart2_0"			"uart"		29, 30, 31, 32
+	"spi0"				"spi"		33, 34, 35, 36
+	"spi0_wp_hold"			"spi"		37, 38
+	"uart1_3_rx_tx"			"uart"		35, 36
+	"uart1_3_cts_rts"		"uart"		37, 38
+	"uart2_1"			"uart"		33, 34, 35, 36
+	"spi1_3"			"spi"		33, 34, 35, 36
+	"uart0"				"uart"		39, 40
+	"pcie_pereset"			"pcie"		41
+	"uart1"				"uart"		42, 43, 44, 45
+	"uart2"				"uart"		46, 47, 48, 49
+	"emmc_51"			"emmc"		50, 51, 52, 53, 54, 55,
+							56, 57, 57, 59, 60, 61
+	"pcm"				"audio"		62, 63, 64, 65
+	"i2s"				"audio"		62, 63, 64, 65
+	"switch_int"			"eth"		66
+	"mdc_mdio"			"eth"		67
+
+Example:
+
+{
+	pio: pinctrl@1001f000 {
+		compatible = "mediatek,mt7986a-pinctrl";
+		reg = <0 0x1001f000 0 0x1000>,
+		      <0 0x11c30000 0 0x1000>,
+		      <0 0x11c40000 0 0x1000>,
+		      <0 0x11e20000 0 0x1000>,
+		      <0 0x11e30000 0 0x1000>,
+		      <0 0x11f00000 0 0x1000>,
+		      <0 0x11f10000 0 0x1000>,
+		      <0 0x1000b000 0 0x1000>;
+		reg-names = "gpio_base", "iocfg_rt_base", "iocfg_rb_base",
+			    "iocfg_lt_base", "iocfg_lb_base", "iocfg_tr_base",
+			    "iocfg_tl_base", "eint";
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&pio 0 0 100>;
+		interrupt-controller;
+		interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		#interrupt-cells = <2>;
+
+		uart1_pins: uart1-pins-42-to-45 {
+			mux {
+				function = "uart";
+				groups = "uart1";
+			};
+		};
+
+		uart2_pins: uart1-pins-46-to-49 {
+			mux {
+				function = "uart";
+				groups = "uart2";
+			};
+		};
+		...
+	};
+}
-- 
2.29.2


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [v4,6/9] pinctrl: mediatek: add support for MT7986 SoC
  2021-09-14  8:51 [v3,0/9] Add basic SoC support for mediatek mt7986 Sam Shih
                   ` (4 preceding siblings ...)
  2021-09-14  8:51 ` [v3,5/9] dt-bindings: pinctrl: update bindings for MT7986 SoC Sam Shih
@ 2021-09-14  8:51 ` Sam Shih
  2021-09-14  8:51 ` [RESEND,v2,7/9] dt-bindings: arm64: dts: mediatek: Add mt7986 series Sam Shih
                   ` (2 subsequent siblings)
  8 siblings, 0 replies; 34+ messages in thread
From: Sam Shih @ 2021-09-14  8:51 UTC (permalink / raw)
  To: Rob Herring, Sean Wang, Linus Walleij, Matthias Brugger,
	Matt Mackall, Herbert Xu, Greg Kroah-Hartman, Wim Van Sebroeck,
	Guenter Roeck, Michael Turquette, Stephen Boyd, Hsin-Yi Wang,
	Enric Balletbo i Serra, Fabien Parent, Seiya Wang, devicetree,
	linux-kernel, linux-mediatek, linux-gpio, linux-arm-kernel,
	linux-crypto, linux-serial, linux-watchdog, linux-clk
  Cc: John Crispin, Ryder Lee, Sam Shih

This commit includes pinctrl driver for Mediatek MT7986

The difference of pinctrl between mt7986a and mt7986b
is that pin-41 to pin-65 do not exist on mt7986b

Signed-off-by: Sam Shih <sam.shih@mediatek.com>

---
v4: fixed warning in mt7986 pinctrl driver
v3: applied the comment suggested by reviewers:
    - merge the consecutive entries into one to reduce the table size
    - set .name to NULL to indicate the pin is not ball out
v2: applied the comment suggested by reviewers:
    - for the pins not ballout, we can fill .name in struct mtk_pin_desc
      as NULL and return -ENOTSUPP in gpio/pinconf ops.
---
 drivers/pinctrl/mediatek/Kconfig          |   7 +
 drivers/pinctrl/mediatek/Makefile         |   1 +
 drivers/pinctrl/mediatek/pinctrl-mt7986.c | 928 ++++++++++++++++++++++
 3 files changed, 936 insertions(+)
 create mode 100644 drivers/pinctrl/mediatek/pinctrl-mt7986.c

diff --git a/drivers/pinctrl/mediatek/Kconfig b/drivers/pinctrl/mediatek/Kconfig
index 7040a7a7bd5d..66db4ac5d169 100644
--- a/drivers/pinctrl/mediatek/Kconfig
+++ b/drivers/pinctrl/mediatek/Kconfig
@@ -119,6 +119,13 @@ config PINCTRL_MT7622
 	default ARM64 && ARCH_MEDIATEK
 	select PINCTRL_MTK_MOORE
 
+config PINCTRL_MT7986
+	bool "Mediatek MT7986 pin control"
+	depends on OF
+	depends on ARM64 || COMPILE_TEST
+	default ARM64 && ARCH_MEDIATEK
+	select PINCTRL_MTK_MOORE
+
 config PINCTRL_MT8167
 	bool "Mediatek MT8167 pin control"
 	depends on OF
diff --git a/drivers/pinctrl/mediatek/Makefile b/drivers/pinctrl/mediatek/Makefile
--- a/drivers/pinctrl/mediatek/Makefile
+++ b/drivers/pinctrl/mediatek/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_PINCTRL_MT6797)	+= pinctrl-mt6797.o
 obj-$(CONFIG_PINCTRL_MT7622)	+= pinctrl-mt7622.o
 obj-$(CONFIG_PINCTRL_MT7623)	+= pinctrl-mt7623.o
 obj-$(CONFIG_PINCTRL_MT7629)	+= pinctrl-mt7629.o
+obj-$(CONFIG_PINCTRL_MT7986)	+= pinctrl-mt7986.o
 obj-$(CONFIG_PINCTRL_MT8167)	+= pinctrl-mt8167.o
 obj-$(CONFIG_PINCTRL_MT8173)	+= pinctrl-mt8173.o
 obj-$(CONFIG_PINCTRL_MT8183)	+= pinctrl-mt8183.o
diff --git a/drivers/pinctrl/mediatek/pinctrl-mt7986.c b/drivers/pinctrl/mediatek/pinctrl-mt7986.c
new file mode 100644
--- /dev/null
+++ b/drivers/pinctrl/mediatek/pinctrl-mt7986.c
@@ -0,0 +1,927 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * The MT7986 driver based on Linux generic pinctrl binding.
+ *
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam Shih <sam.shih@mediatek.com>
+ */
+
+#include "pinctrl-moore.h"
+
+#define MT7986_PIN(_number, _name) MTK_PIN(_number, _name, 0, _number, DRV_GRP4)
+#define MT7986_NOT_BALLOUT_PIN(_number) { .number = _number, .name = NULL }
+
+#define PIN_FIELD_BASE(_s_pin, _e_pin, _i_base, _s_addr, _x_addrs, _s_bit,	\
+			_x_bits)	\
+		PIN_FIELD_CALC(_s_pin, _e_pin, _i_base, _s_addr, _x_addrs, _s_bit,	\
+			_x_bits, 32, 0)
+
+/**
+ * enum - Locking variants of the iocfg bases
+ *
+ * MT7986 have multiple bases to program pin configuration listed as the below:
+ * iocfg_rt:0x11c30000, iocfg_rb:0x11c40000, iocfg_lt:0x11e20000,
+ * iocfg_lb:0x11e30000, iocfg_tr:0x11f00000, iocfg_tl:0x11f10000,
+ * _i_based could be used to indicate what base the pin should be mapped into.
+ *
+ * Each iocfg register base control different group of pads on the SoC
+ *
+ *
+ *  chip carrier
+ *
+ *      A  B  C  D  E  F  G  H
+ *    +------------------------+
+ *  8 | o  o  o  o  o  o  o  o |
+ *  7 | o  o  o  o  o  o  o  o |
+ *  6 | o  o  o  o  o  o  o  o |
+ *  5 | o  o  o  o  o  o  o  o |
+ *  4 | o  o  o  o  o  o  o  o |
+ *  3 | o  o  o  o  o  o  o  o |
+ *  2 | o  o  o  o  o  o  o  o |
+ *  1 | o  o  o  o  o  o  o  o |
+ *    +------------------------+
+ *
+ *  inside Chip carrier
+ *
+ *      A  B  C  D  E  F  G  H
+ *    +------------------------+
+ *  8 |                        |
+ *  7 |        TL  TR          |
+ *  6 |      +---------+       |
+ *  5 |   LT |         | RT    |
+ *  4 |      |         |       |
+ *  3 |   LB |         | RB    |
+ *  2 |      +---------+       |
+ *  1 |                        |
+ *    +------------------------+
+ *
+ */
+
+enum {
+	GPIO_BASE,
+	IOCFG_RT_BASE,
+	IOCFG_RB_BASE,
+	IOCFG_LT_BASE,
+	IOCFG_LB_BASE,
+	IOCFG_TR_BASE,
+	IOCFG_TL_BASE,
+};
+
+static const char *const mt7986_pinctrl_register_base_names[] = {
+	"gpio_base", "iocfg_rt_base", "iocfg_rb_base", "iocfg_lt_base",
+	"iocfg_lb_base", "iocfg_tr_base", "iocfg_tl_base",
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_mode_range[] = {
+	PIN_FIELD(0, 100, 0x300, 0x10, 0, 4),
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_dir_range[] = {
+	PIN_FIELD(0, 100, 0x0, 0x10, 0, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_di_range[] = {
+	PIN_FIELD(0, 100, 0x200, 0x10, 0, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_do_range[] = {
+	PIN_FIELD(0, 100, 0x100, 0x10, 0, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_ies_range[] = {
+	PIN_FIELD_BASE(0, 0, IOCFG_RB_BASE, 0x40, 0x10, 17, 1),
+	PIN_FIELD_BASE(1, 2, IOCFG_LT_BASE, 0x20, 0x10, 10, 1),
+	PIN_FIELD_BASE(3, 4, IOCFG_LB_BASE, 0x20, 0x10, 0, 1),
+	PIN_FIELD_BASE(5, 6, IOCFG_RB_BASE, 0x40, 0x10, 0, 1),
+	PIN_FIELD_BASE(7, 10, IOCFG_LT_BASE, 0x20, 0x10, 0, 1),
+	PIN_FIELD_BASE(11, 14, IOCFG_RB_BASE, 0x40, 0x10, 8, 1),
+	PIN_FIELD_BASE(15, 20, IOCFG_RB_BASE, 0x40, 0x10, 2, 1),
+	PIN_FIELD_BASE(21, 23, IOCFG_RT_BASE, 0x30, 0x10, 12, 1),
+	PIN_FIELD_BASE(24, 24, IOCFG_RT_BASE, 0x30, 0x10, 18, 1),
+	PIN_FIELD_BASE(25, 25, IOCFG_RT_BASE, 0x30, 0x10, 17, 1),
+	PIN_FIELD_BASE(26, 27, IOCFG_RT_BASE, 0x30, 0x10, 15, 1),
+	PIN_FIELD_BASE(28, 29, IOCFG_RT_BASE, 0x30, 0x10, 19, 1),
+	PIN_FIELD_BASE(30, 30, IOCFG_RT_BASE, 0x30, 0x10, 23, 1),
+	PIN_FIELD_BASE(31, 31, IOCFG_RT_BASE, 0x30, 0x10, 22, 1),
+	PIN_FIELD_BASE(32, 32, IOCFG_RT_BASE, 0x30, 0x10, 21, 1),
+	PIN_FIELD_BASE(33, 33, IOCFG_LT_BASE, 0x20, 0x10, 4, 1),
+	PIN_FIELD_BASE(34, 34, IOCFG_LT_BASE, 0x20, 0x10, 8, 1),
+	PIN_FIELD_BASE(35, 35, IOCFG_LT_BASE, 0x20, 0x10, 7, 1),
+	PIN_FIELD_BASE(36, 37, IOCFG_LT_BASE, 0x20, 0x10, 5, 1),
+	PIN_FIELD_BASE(38, 38, IOCFG_LT_BASE, 0x20, 0x10, 9, 1),
+	PIN_FIELD_BASE(39, 40, IOCFG_RB_BASE, 0x40, 0x10, 18, 1),
+	PIN_FIELD_BASE(41, 41, IOCFG_RB_BASE, 0x40, 0x10, 12, 1),
+	PIN_FIELD_BASE(42, 43, IOCFG_RB_BASE, 0x40, 0x10, 22, 1),
+	PIN_FIELD_BASE(44, 45, IOCFG_RB_BASE, 0x40, 0x10, 20, 1),
+	PIN_FIELD_BASE(46, 47, IOCFG_RB_BASE, 0x40, 0x10, 26, 1),
+	PIN_FIELD_BASE(48, 49, IOCFG_RB_BASE, 0x40, 0x10, 24, 1),
+	PIN_FIELD_BASE(50, 57, IOCFG_RT_BASE, 0x30, 0x10, 2, 1),
+	PIN_FIELD_BASE(58, 58, IOCFG_RT_BASE, 0x30, 0x10, 1, 1),
+	PIN_FIELD_BASE(59, 59, IOCFG_RT_BASE, 0x30, 0x10, 0, 1),
+	PIN_FIELD_BASE(60, 61, IOCFG_RT_BASE, 0x30, 0x10, 10, 1),
+	PIN_FIELD_BASE(62, 62, IOCFG_RB_BASE, 0x40, 0x10, 15, 1),
+	PIN_FIELD_BASE(63, 63, IOCFG_RB_BASE, 0x40, 0x10, 14, 1),
+	PIN_FIELD_BASE(64, 64, IOCFG_RB_BASE, 0x40, 0x10, 13, 1),
+	PIN_FIELD_BASE(65, 65, IOCFG_RB_BASE, 0x40, 0x10, 16, 1),
+	PIN_FIELD_BASE(66, 68, IOCFG_LB_BASE, 0x20, 0x10, 2, 1),
+	PIN_FIELD_BASE(69, 69, IOCFG_TR_BASE, 0x30, 0x10, 1, 1),
+	PIN_FIELD_BASE(70, 70, IOCFG_TR_BASE, 0x30, 0x10, 0, 1),
+	PIN_FIELD_BASE(71, 71, IOCFG_TR_BASE, 0x30, 0x10, 16, 1),
+	PIN_FIELD_BASE(72, 73, IOCFG_TR_BASE, 0x30, 0x10, 14, 1),
+	PIN_FIELD_BASE(74, 74, IOCFG_TR_BASE, 0x30, 0x10, 4, 1),
+	PIN_FIELD_BASE(75, 77, IOCFG_TR_BASE, 0x30, 0x10, 6, 1),
+	PIN_FIELD_BASE(78, 79, IOCFG_TR_BASE, 0x30, 0x10, 2, 1),
+	PIN_FIELD_BASE(80, 84, IOCFG_TR_BASE, 0x30, 0x10, 9, 1),
+	PIN_FIELD_BASE(85, 85, IOCFG_TR_BASE, 0x30, 0x10, 5, 1),
+	PIN_FIELD_BASE(86, 86, IOCFG_TL_BASE, 0x30, 0x10, 1, 1),
+	PIN_FIELD_BASE(87, 87, IOCFG_TL_BASE, 0x30, 0x10, 0, 1),
+	PIN_FIELD_BASE(88, 88, IOCFG_TL_BASE, 0x30, 0x10, 14, 1),
+	PIN_FIELD_BASE(89, 90, IOCFG_TL_BASE, 0x30, 0x10, 12, 1),
+	PIN_FIELD_BASE(91, 94, IOCFG_TL_BASE, 0x30, 0x10, 4, 1),
+	PIN_FIELD_BASE(95, 96, IOCFG_TL_BASE, 0x30, 0x10, 2, 1),
+	PIN_FIELD_BASE(97, 100, IOCFG_TL_BASE, 0x30, 0x10, 8, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_smt_range[] = {
+	PIN_FIELD_BASE(0, 0, IOCFG_RB_BASE, 0xf0, 0x10, 17, 1),
+	PIN_FIELD_BASE(1, 2, IOCFG_LT_BASE, 0x90, 0x10, 10, 1),
+	PIN_FIELD_BASE(3, 4, IOCFG_LB_BASE, 0x90, 0x10, 0, 1),
+	PIN_FIELD_BASE(5, 6, IOCFG_RB_BASE, 0xf0, 0x10, 0, 1),
+	PIN_FIELD_BASE(7, 10, IOCFG_LT_BASE, 0x90, 0x10, 0, 1),
+	PIN_FIELD_BASE(11, 14, IOCFG_RB_BASE, 0xf0, 0x10, 8, 1),
+	PIN_FIELD_BASE(15, 20, IOCFG_RB_BASE, 0xf0, 0x10, 2, 1),
+	PIN_FIELD_BASE(21, 23, IOCFG_RT_BASE, 0xc0, 0x10, 12, 1),
+	PIN_FIELD_BASE(24, 24, IOCFG_RT_BASE, 0xc0, 0x10, 18, 1),
+	PIN_FIELD_BASE(25, 25, IOCFG_RT_BASE, 0xc0, 0x10, 17, 1),
+	PIN_FIELD_BASE(26, 27, IOCFG_RT_BASE, 0xc0, 0x10, 15, 1),
+	PIN_FIELD_BASE(28, 29, IOCFG_RT_BASE, 0xc0, 0x10, 19, 1),
+	PIN_FIELD_BASE(30, 30, IOCFG_RT_BASE, 0xc0, 0x10, 23, 1),
+	PIN_FIELD_BASE(31, 31, IOCFG_RT_BASE, 0xc0, 0x10, 22, 1),
+	PIN_FIELD_BASE(32, 32, IOCFG_RT_BASE, 0xc0, 0x10, 21, 1),
+	PIN_FIELD_BASE(33, 33, IOCFG_LT_BASE, 0x90, 0x10, 4, 1),
+	PIN_FIELD_BASE(34, 34, IOCFG_LT_BASE, 0x90, 0x10, 8, 1),
+	PIN_FIELD_BASE(35, 35, IOCFG_LT_BASE, 0x90, 0x10, 7, 1),
+	PIN_FIELD_BASE(36, 37, IOCFG_LT_BASE, 0x90, 0x10, 5, 1),
+	PIN_FIELD_BASE(38, 38, IOCFG_LT_BASE, 0x90, 0x10, 9, 1),
+	PIN_FIELD_BASE(39, 40, IOCFG_RB_BASE, 0xf0, 0x10, 18, 1),
+	PIN_FIELD_BASE(41, 41, IOCFG_RB_BASE, 0xf0, 0x10, 12, 1),
+	PIN_FIELD_BASE(42, 43, IOCFG_RB_BASE, 0xf0, 0x10, 22, 1),
+	PIN_FIELD_BASE(44, 45, IOCFG_RB_BASE, 0xf0, 0x10, 20, 1),
+	PIN_FIELD_BASE(46, 47, IOCFG_RB_BASE, 0xf0, 0x10, 26, 1),
+	PIN_FIELD_BASE(48, 49, IOCFG_RB_BASE, 0xf0, 0x10, 24, 1),
+	PIN_FIELD_BASE(50, 57, IOCFG_RT_BASE, 0xc0, 0x10, 2, 1),
+	PIN_FIELD_BASE(58, 58, IOCFG_RT_BASE, 0xc0, 0x10, 1, 1),
+	PIN_FIELD_BASE(59, 59, IOCFG_RT_BASE, 0xc0, 0x10, 0, 1),
+	PIN_FIELD_BASE(60, 61, IOCFG_RT_BASE, 0xc0, 0x10, 10, 1),
+	PIN_FIELD_BASE(62, 62, IOCFG_RB_BASE, 0xf0, 0x10, 15, 1),
+	PIN_FIELD_BASE(63, 63, IOCFG_RB_BASE, 0xf0, 0x10, 14, 1),
+	PIN_FIELD_BASE(64, 64, IOCFG_RB_BASE, 0xf0, 0x10, 13, 1),
+	PIN_FIELD_BASE(65, 65, IOCFG_RB_BASE, 0xf0, 0x10, 16, 1),
+	PIN_FIELD_BASE(66, 68, IOCFG_LB_BASE, 0x90, 0x10, 2, 1),
+	PIN_FIELD_BASE(69, 69, IOCFG_TR_BASE, 0x80, 0x10, 1, 1),
+	PIN_FIELD_BASE(70, 70, IOCFG_TR_BASE, 0x80, 0x10, 0, 1),
+	PIN_FIELD_BASE(71, 71, IOCFG_TR_BASE, 0x80, 0x10, 16, 1),
+	PIN_FIELD_BASE(72, 73, IOCFG_TR_BASE, 0x80, 0x10, 14, 1),
+	PIN_FIELD_BASE(74, 74, IOCFG_TR_BASE, 0x80, 0x10, 4, 1),
+	PIN_FIELD_BASE(75, 77, IOCFG_TR_BASE, 0x80, 0x10, 6, 1),
+	PIN_FIELD_BASE(78, 79, IOCFG_TR_BASE, 0x80, 0x10, 2, 1),
+	PIN_FIELD_BASE(80, 84, IOCFG_TR_BASE, 0x80, 0x10, 9, 1),
+	PIN_FIELD_BASE(85, 85, IOCFG_TR_BASE, 0x80, 0x10, 5, 1),
+	PIN_FIELD_BASE(86, 86, IOCFG_TL_BASE, 0x70, 0x10, 1, 1),
+	PIN_FIELD_BASE(87, 87, IOCFG_TL_BASE, 0x70, 0x10, 0, 1),
+	PIN_FIELD_BASE(88, 88, IOCFG_TL_BASE, 0x70, 0x10, 14, 1),
+	PIN_FIELD_BASE(89, 90, IOCFG_TL_BASE, 0x70, 0x10, 12, 1),
+	PIN_FIELD_BASE(91, 94, IOCFG_TL_BASE, 0x70, 0x10, 4, 1),
+	PIN_FIELD_BASE(95, 96, IOCFG_TL_BASE, 0x70, 0x10, 2, 1),
+	PIN_FIELD_BASE(97, 100, IOCFG_TL_BASE, 0x70, 0x10, 8, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_pu_range[] = {
+	PIN_FIELD_BASE(69, 69, IOCFG_TR_BASE, 0x50, 0x10, 1, 1),
+	PIN_FIELD_BASE(70, 70, IOCFG_TR_BASE, 0x50, 0x10, 0, 1),
+	PIN_FIELD_BASE(71, 71, IOCFG_TR_BASE, 0x50, 0x10, 16, 1),
+	PIN_FIELD_BASE(72, 73, IOCFG_TR_BASE, 0x50, 0x10, 14, 1),
+	PIN_FIELD_BASE(74, 74, IOCFG_TR_BASE, 0x50, 0x10, 4, 1),
+	PIN_FIELD_BASE(75, 77, IOCFG_TR_BASE, 0x50, 0x10, 6, 1),
+	PIN_FIELD_BASE(78, 79, IOCFG_TR_BASE, 0x50, 0x10, 2, 1),
+	PIN_FIELD_BASE(80, 84, IOCFG_TR_BASE, 0x50, 0x10, 9, 1),
+	PIN_FIELD_BASE(85, 85, IOCFG_TR_BASE, 0x50, 0x10, 5, 1),
+	PIN_FIELD_BASE(86, 86, IOCFG_TL_BASE, 0x50, 0x10, 1, 1),
+	PIN_FIELD_BASE(87, 87, IOCFG_TL_BASE, 0x50, 0x10, 0, 1),
+	PIN_FIELD_BASE(88, 88, IOCFG_TL_BASE, 0x50, 0x10, 14, 1),
+	PIN_FIELD_BASE(89, 90, IOCFG_TL_BASE, 0x50, 0x10, 12, 1),
+	PIN_FIELD_BASE(91, 94, IOCFG_TL_BASE, 0x50, 0x10, 4, 1),
+	PIN_FIELD_BASE(95, 96, IOCFG_TL_BASE, 0x50, 0x10, 2, 1),
+	PIN_FIELD_BASE(97, 100, IOCFG_TL_BASE, 0x50, 0x10, 8, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_pd_range[] = {
+	PIN_FIELD_BASE(69, 69, IOCFG_TR_BASE, 0x40, 0x10, 1, 1),
+	PIN_FIELD_BASE(70, 70, IOCFG_TR_BASE, 0x40, 0x10, 0, 1),
+	PIN_FIELD_BASE(71, 71, IOCFG_TR_BASE, 0x40, 0x10, 16, 1),
+	PIN_FIELD_BASE(72, 73, IOCFG_TR_BASE, 0x40, 0x10, 14, 1),
+	PIN_FIELD_BASE(74, 74, IOCFG_TR_BASE, 0x40, 0x10, 4, 1),
+	PIN_FIELD_BASE(75, 77, IOCFG_TR_BASE, 0x40, 0x10, 6, 1),
+	PIN_FIELD_BASE(78, 79, IOCFG_TR_BASE, 0x40, 0x10, 2, 1),
+	PIN_FIELD_BASE(80, 84, IOCFG_TR_BASE, 0x40, 0x10, 9, 1),
+	PIN_FIELD_BASE(85, 85, IOCFG_TR_BASE, 0x40, 0x10, 5, 1),
+	PIN_FIELD_BASE(86, 86, IOCFG_TL_BASE, 0x40, 0x10, 1, 1),
+	PIN_FIELD_BASE(87, 87, IOCFG_TL_BASE, 0x40, 0x10, 0, 1),
+	PIN_FIELD_BASE(88, 88, IOCFG_TL_BASE, 0x40, 0x10, 14, 1),
+	PIN_FIELD_BASE(89, 90, IOCFG_TL_BASE, 0x40, 0x10, 12, 1),
+	PIN_FIELD_BASE(91, 94, IOCFG_TL_BASE, 0x40, 0x10, 4, 1),
+	PIN_FIELD_BASE(95, 96, IOCFG_TL_BASE, 0x40, 0x10, 2, 1),
+	PIN_FIELD_BASE(97, 100, IOCFG_TL_BASE, 0x40, 0x10, 8, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_drv_range[] = {
+	PIN_FIELD_BASE(0, 0, IOCFG_RB_BASE, 0x10, 0x10, 21, 3),
+	PIN_FIELD_BASE(1, 2, IOCFG_LT_BASE, 0x10, 0x10, 0, 3),
+	PIN_FIELD_BASE(3, 4, IOCFG_LB_BASE, 0x00, 0x10, 0, 1),
+	PIN_FIELD_BASE(5, 5, IOCFG_RB_BASE, 0x00, 0x10, 0, 3),
+	PIN_FIELD_BASE(6, 6, IOCFG_RB_BASE, 0x00, 0x10, 21, 3),
+	PIN_FIELD_BASE(7, 10, IOCFG_LT_BASE, 0x00, 0x10, 0, 3),
+	PIN_FIELD_BASE(11, 12, IOCFG_RB_BASE, 0x00, 0x10, 24, 3),
+	PIN_FIELD_BASE(13, 14, IOCFG_RB_BASE, 0x10, 0x10, 0, 3),
+	PIN_FIELD_BASE(15, 20, IOCFG_RB_BASE, 0x00, 0x10, 3, 3),
+	PIN_FIELD_BASE(21, 23, IOCFG_RT_BASE, 0x10, 0x10, 6, 3),
+	PIN_FIELD_BASE(24, 24, IOCFG_RT_BASE, 0x10, 0x10, 24, 3),
+	PIN_FIELD_BASE(25, 25, IOCFG_RT_BASE, 0x10, 0x10, 21, 3),
+	PIN_FIELD_BASE(26, 27, IOCFG_RT_BASE, 0x10, 0x10, 15, 3),
+	PIN_FIELD_BASE(28, 28, IOCFG_RT_BASE, 0x10, 0x10, 27, 3),
+	PIN_FIELD_BASE(29, 29, IOCFG_RT_BASE, 0x20, 0x10, 0, 3),
+	PIN_FIELD_BASE(30, 30, IOCFG_RT_BASE, 0x20, 0x10, 9, 3),
+	PIN_FIELD_BASE(31, 31, IOCFG_RT_BASE, 0x20, 0x10, 6, 3),
+	PIN_FIELD_BASE(32, 32, IOCFG_RT_BASE, 0x20, 0x10, 3, 3),
+	PIN_FIELD_BASE(33, 33, IOCFG_LT_BASE, 0x00, 0x10, 12, 3),
+	PIN_FIELD_BASE(34, 34, IOCFG_LT_BASE, 0x00, 0x10, 24, 3),
+	PIN_FIELD_BASE(35, 35, IOCFG_LT_BASE, 0x00, 0x10, 21, 3),
+	PIN_FIELD_BASE(36, 37, IOCFG_LT_BASE, 0x00, 0x10, 15, 3),
+	PIN_FIELD_BASE(38, 38, IOCFG_LT_BASE, 0x00, 0x10, 27, 3),
+	PIN_FIELD_BASE(39, 39, IOCFG_RB_BASE, 0x10, 0x10, 27, 3),
+	PIN_FIELD_BASE(40, 40, IOCFG_RB_BASE, 0x20, 0x10, 0, 3),
+	PIN_FIELD_BASE(41, 41, IOCFG_RB_BASE, 0x10, 0x10, 6, 3),
+	PIN_FIELD_BASE(42, 43, IOCFG_RB_BASE, 0x20, 0x10, 9, 3),
+	PIN_FIELD_BASE(44, 45, IOCFG_RB_BASE, 0x20, 0x10, 3, 3),
+	PIN_FIELD_BASE(46, 47, IOCFG_RB_BASE, 0x20, 0x10, 21, 3),
+	PIN_FIELD_BASE(48, 49, IOCFG_RB_BASE, 0x20, 0x10, 15, 3),
+	PIN_FIELD_BASE(50, 57, IOCFG_RT_BASE, 0x00, 0x10, 6, 3),
+	PIN_FIELD_BASE(58, 58, IOCFG_RT_BASE, 0x00, 0x10, 3, 3),
+	PIN_FIELD_BASE(59, 59, IOCFG_RT_BASE, 0x00, 0x10, 0, 3),
+	PIN_FIELD_BASE(60, 61, IOCFG_RT_BASE, 0x10, 0x10, 0, 3),
+	PIN_FIELD_BASE(62, 62, IOCFG_RB_BASE, 0x10, 0x10, 15, 3),
+	PIN_FIELD_BASE(63, 63, IOCFG_RB_BASE, 0x10, 0x10, 12, 3),
+	PIN_FIELD_BASE(64, 64, IOCFG_RB_BASE, 0x10, 0x10, 9, 3),
+	PIN_FIELD_BASE(65, 65, IOCFG_RB_BASE, 0x10, 0x10, 18, 3),
+	PIN_FIELD_BASE(66, 68, IOCFG_LB_BASE, 0x00, 0x10, 2, 3),
+	PIN_FIELD_BASE(69, 69, IOCFG_TR_BASE, 0x00, 0x10, 3, 3),
+	PIN_FIELD_BASE(70, 70, IOCFG_TR_BASE, 0x00, 0x10, 0, 3),
+	PIN_FIELD_BASE(71, 71, IOCFG_TR_BASE, 0x10, 0x10, 18, 3),
+	PIN_FIELD_BASE(72, 73, IOCFG_TR_BASE, 0x10, 0x10, 12, 3),
+	PIN_FIELD_BASE(74, 77, IOCFG_TR_BASE, 0x00, 0x10, 15, 3),
+	PIN_FIELD_BASE(78, 79, IOCFG_TR_BASE, 0x00, 0x10, 6, 3),
+	PIN_FIELD_BASE(80, 80, IOCFG_TR_BASE, 0x00, 0x10, 27, 3),
+	PIN_FIELD_BASE(81, 84, IOCFG_TR_BASE, 0x10, 0x10, 0, 3),
+	PIN_FIELD_BASE(85, 85, IOCFG_TR_BASE, 0x00, 0x10, 12, 3),
+	PIN_FIELD_BASE(86, 86, IOCFG_TL_BASE, 0x00, 0x10, 3, 3),
+	PIN_FIELD_BASE(87, 87, IOCFG_TL_BASE, 0x00, 0x10, 0, 3),
+	PIN_FIELD_BASE(88, 88, IOCFG_TL_BASE, 0x10, 0x10, 12, 3),
+	PIN_FIELD_BASE(89, 90, IOCFG_TL_BASE, 0x10, 0x10, 6, 3),
+	PIN_FIELD_BASE(91, 94, IOCFG_TL_BASE, 0x00, 0x10, 12, 3),
+	PIN_FIELD_BASE(95, 96, IOCFG_TL_BASE, 0x00, 0x10, 6, 3),
+	PIN_FIELD_BASE(97, 98, IOCFG_TL_BASE, 0x00, 0x10, 24, 3),
+	PIN_FIELD_BASE(99, 100, IOCFG_TL_BASE, 0x10, 0x10, 2, 3),
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_pupd_range[] = {
+	PIN_FIELD_BASE(0, 0, IOCFG_RB_BASE, 0x60, 0x10, 17, 1),
+	PIN_FIELD_BASE(1, 2, IOCFG_LT_BASE, 0x30, 0x10, 10, 1),
+	PIN_FIELD_BASE(3, 4, IOCFG_LB_BASE, 0x40, 0x10, 0, 1),
+	PIN_FIELD_BASE(5, 6, IOCFG_RB_BASE, 0x60, 0x10, 0, 1),
+	PIN_FIELD_BASE(7, 10, IOCFG_LT_BASE, 0x30, 0x10, 0, 1),
+	PIN_FIELD_BASE(11, 14, IOCFG_RB_BASE, 0x60, 0x10, 8, 1),
+	PIN_FIELD_BASE(15, 20, IOCFG_RB_BASE, 0x60, 0x10, 2, 1),
+	PIN_FIELD_BASE(21, 23, IOCFG_RT_BASE, 0x40, 0x10, 12, 1),
+	PIN_FIELD_BASE(24, 24, IOCFG_RT_BASE, 0x40, 0x10, 18, 1),
+	PIN_FIELD_BASE(25, 25, IOCFG_RT_BASE, 0x40, 0x10, 17, 1),
+	PIN_FIELD_BASE(26, 27, IOCFG_RT_BASE, 0x40, 0x10, 15, 1),
+	PIN_FIELD_BASE(28, 29, IOCFG_RT_BASE, 0x40, 0x10, 19, 1),
+	PIN_FIELD_BASE(30, 30, IOCFG_RT_BASE, 0x40, 0x10, 23, 1),
+	PIN_FIELD_BASE(31, 31, IOCFG_RT_BASE, 0x40, 0x10, 22, 1),
+	PIN_FIELD_BASE(32, 32, IOCFG_RT_BASE, 0x40, 0x10, 21, 1),
+	PIN_FIELD_BASE(33, 33, IOCFG_LT_BASE, 0x30, 0x10, 4, 1),
+	PIN_FIELD_BASE(34, 34, IOCFG_LT_BASE, 0x30, 0x10, 8, 1),
+	PIN_FIELD_BASE(35, 35, IOCFG_LT_BASE, 0x30, 0x10, 7, 1),
+	PIN_FIELD_BASE(36, 37, IOCFG_LT_BASE, 0x30, 0x10, 5, 1),
+	PIN_FIELD_BASE(38, 38, IOCFG_LT_BASE, 0x30, 0x10, 9, 1),
+	PIN_FIELD_BASE(39, 40, IOCFG_RB_BASE, 0x60, 0x10, 18, 1),
+	PIN_FIELD_BASE(41, 41, IOCFG_RB_BASE, 0x60, 0x10, 12, 1),
+	PIN_FIELD_BASE(42, 43, IOCFG_RB_BASE, 0x60, 0x10, 22, 1),
+	PIN_FIELD_BASE(44, 45, IOCFG_RB_BASE, 0x60, 0x10, 20, 1),
+	PIN_FIELD_BASE(46, 47, IOCFG_RB_BASE, 0x60, 0x10, 26, 1),
+	PIN_FIELD_BASE(48, 49, IOCFG_RB_BASE, 0x60, 0x10, 24, 1),
+	PIN_FIELD_BASE(50, 57, IOCFG_RT_BASE, 0x40, 0x10, 2, 1),
+	PIN_FIELD_BASE(58, 58, IOCFG_RT_BASE, 0x40, 0x10, 1, 1),
+	PIN_FIELD_BASE(59, 59, IOCFG_RT_BASE, 0x40, 0x10, 0, 1),
+	PIN_FIELD_BASE(60, 61, IOCFG_RT_BASE, 0x40, 0x10, 10, 1),
+	PIN_FIELD_BASE(62, 62, IOCFG_RB_BASE, 0x60, 0x10, 15, 1),
+	PIN_FIELD_BASE(63, 63, IOCFG_RB_BASE, 0x60, 0x10, 14, 1),
+	PIN_FIELD_BASE(64, 64, IOCFG_RB_BASE, 0x60, 0x10, 13, 1),
+	PIN_FIELD_BASE(65, 65, IOCFG_RB_BASE, 0x60, 0x10, 16, 1),
+	PIN_FIELD_BASE(66, 68, IOCFG_LB_BASE, 0x40, 0x10, 2, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_r0_range[] = {
+	PIN_FIELD_BASE(0, 0, IOCFG_RB_BASE, 0x70, 0x10, 17, 1),
+	PIN_FIELD_BASE(1, 2, IOCFG_LT_BASE, 0x40, 0x10, 10, 1),
+	PIN_FIELD_BASE(3, 4, IOCFG_LB_BASE, 0x50, 0x10, 0, 1),
+	PIN_FIELD_BASE(5, 6, IOCFG_RB_BASE, 0x70, 0x10, 0, 1),
+	PIN_FIELD_BASE(7, 10, IOCFG_LT_BASE, 0x40, 0x10, 0, 1),
+	PIN_FIELD_BASE(11, 14, IOCFG_RB_BASE, 0x70, 0x10, 8, 1),
+	PIN_FIELD_BASE(15, 20, IOCFG_RB_BASE, 0x70, 0x10, 2, 1),
+	PIN_FIELD_BASE(21, 23, IOCFG_RT_BASE, 0x50, 0x10, 12, 1),
+	PIN_FIELD_BASE(24, 24, IOCFG_RT_BASE, 0x50, 0x10, 18, 1),
+	PIN_FIELD_BASE(25, 25, IOCFG_RT_BASE, 0x50, 0x10, 17, 1),
+	PIN_FIELD_BASE(26, 27, IOCFG_RT_BASE, 0x50, 0x10, 15, 1),
+	PIN_FIELD_BASE(28, 29, IOCFG_RT_BASE, 0x50, 0x10, 19, 1),
+	PIN_FIELD_BASE(30, 30, IOCFG_RT_BASE, 0x50, 0x10, 23, 1),
+	PIN_FIELD_BASE(31, 31, IOCFG_RT_BASE, 0x50, 0x10, 22, 1),
+	PIN_FIELD_BASE(32, 32, IOCFG_RT_BASE, 0x50, 0x10, 21, 1),
+	PIN_FIELD_BASE(33, 33, IOCFG_LT_BASE, 0x40, 0x10, 4, 1),
+	PIN_FIELD_BASE(34, 34, IOCFG_LT_BASE, 0x40, 0x10, 8, 1),
+	PIN_FIELD_BASE(35, 35, IOCFG_LT_BASE, 0x40, 0x10, 7, 1),
+	PIN_FIELD_BASE(36, 37, IOCFG_LT_BASE, 0x40, 0x10, 5, 1),
+	PIN_FIELD_BASE(38, 38, IOCFG_LT_BASE, 0x40, 0x10, 9, 1),
+	PIN_FIELD_BASE(39, 40, IOCFG_RB_BASE, 0x70, 0x10, 18, 1),
+	PIN_FIELD_BASE(41, 41, IOCFG_RB_BASE, 0x70, 0x10, 12, 1),
+	PIN_FIELD_BASE(42, 43, IOCFG_RB_BASE, 0x70, 0x10, 22, 1),
+	PIN_FIELD_BASE(44, 45, IOCFG_RB_BASE, 0x70, 0x10, 20, 1),
+	PIN_FIELD_BASE(46, 47, IOCFG_RB_BASE, 0x70, 0x10, 26, 1),
+	PIN_FIELD_BASE(48, 49, IOCFG_RB_BASE, 0x70, 0x10, 24, 1),
+	PIN_FIELD_BASE(50, 57, IOCFG_RT_BASE, 0x50, 0x10, 2, 1),
+	PIN_FIELD_BASE(58, 58, IOCFG_RT_BASE, 0x50, 0x10, 1, 1),
+	PIN_FIELD_BASE(59, 59, IOCFG_RT_BASE, 0x50, 0x10, 0, 1),
+	PIN_FIELD_BASE(60, 61, IOCFG_RT_BASE, 0x50, 0x10, 10, 1),
+	PIN_FIELD_BASE(62, 62, IOCFG_RB_BASE, 0x70, 0x10, 15, 1),
+	PIN_FIELD_BASE(63, 63, IOCFG_RB_BASE, 0x70, 0x10, 14, 1),
+	PIN_FIELD_BASE(64, 64, IOCFG_RB_BASE, 0x70, 0x10, 13, 1),
+	PIN_FIELD_BASE(65, 65, IOCFG_RB_BASE, 0x70, 0x10, 16, 1),
+	PIN_FIELD_BASE(66, 68, IOCFG_LB_BASE, 0x50, 0x10, 2, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_r1_range[] = {
+	PIN_FIELD_BASE(0, 0, IOCFG_RB_BASE, 0x80, 0x10, 17, 1),
+	PIN_FIELD_BASE(1, 2, IOCFG_LT_BASE, 0x50, 0x10, 10, 1),
+	PIN_FIELD_BASE(3, 4, IOCFG_LB_BASE, 0x60, 0x10, 0, 1),
+	PIN_FIELD_BASE(5, 6, IOCFG_RB_BASE, 0x80, 0x10, 0, 1),
+	PIN_FIELD_BASE(7, 10, IOCFG_LT_BASE, 0x50, 0x10, 0, 1),
+	PIN_FIELD_BASE(11, 14, IOCFG_RB_BASE, 0x80, 0x10, 8, 1),
+	PIN_FIELD_BASE(15, 20, IOCFG_RB_BASE, 0x80, 0x10, 2, 1),
+	PIN_FIELD_BASE(21, 23, IOCFG_RT_BASE, 0x60, 0x10, 12, 1),
+	PIN_FIELD_BASE(24, 24, IOCFG_RT_BASE, 0x60, 0x10, 18, 1),
+	PIN_FIELD_BASE(25, 25, IOCFG_RT_BASE, 0x60, 0x10, 17, 1),
+	PIN_FIELD_BASE(26, 27, IOCFG_RT_BASE, 0x60, 0x10, 15, 1),
+	PIN_FIELD_BASE(28, 29, IOCFG_RT_BASE, 0x60, 0x10, 19, 1),
+	PIN_FIELD_BASE(30, 30, IOCFG_RT_BASE, 0x60, 0x10, 23, 1),
+	PIN_FIELD_BASE(31, 31, IOCFG_RT_BASE, 0x60, 0x10, 22, 1),
+	PIN_FIELD_BASE(32, 32, IOCFG_RT_BASE, 0x60, 0x10, 21, 1),
+	PIN_FIELD_BASE(33, 33, IOCFG_LT_BASE, 0x50, 0x10, 4, 1),
+	PIN_FIELD_BASE(34, 34, IOCFG_LT_BASE, 0x50, 0x10, 8, 1),
+	PIN_FIELD_BASE(35, 35, IOCFG_LT_BASE, 0x50, 0x10, 7, 1),
+	PIN_FIELD_BASE(36, 37, IOCFG_LT_BASE, 0x50, 0x10, 5, 1),
+	PIN_FIELD_BASE(38, 38, IOCFG_LT_BASE, 0x50, 0x10, 9, 1),
+	PIN_FIELD_BASE(39, 40, IOCFG_RB_BASE, 0x80, 0x10, 18, 1),
+	PIN_FIELD_BASE(41, 41, IOCFG_RB_BASE, 0x80, 0x10, 12, 1),
+	PIN_FIELD_BASE(42, 43, IOCFG_RB_BASE, 0x80, 0x10, 22, 1),
+	PIN_FIELD_BASE(44, 45, IOCFG_RB_BASE, 0x80, 0x10, 20, 1),
+	PIN_FIELD_BASE(46, 47, IOCFG_RB_BASE, 0x80, 0x10, 26, 1),
+	PIN_FIELD_BASE(48, 49, IOCFG_RB_BASE, 0x80, 0x10, 24, 1),
+	PIN_FIELD_BASE(50, 57, IOCFG_RT_BASE, 0x60, 0x10, 2, 1),
+	PIN_FIELD_BASE(58, 58, IOCFG_RT_BASE, 0x60, 0x10, 1, 1),
+	PIN_FIELD_BASE(59, 59, IOCFG_RT_BASE, 0x60, 0x10, 0, 1),
+	PIN_FIELD_BASE(60, 61, IOCFG_RT_BASE, 0x60, 0x10, 10, 1),
+	PIN_FIELD_BASE(62, 62, IOCFG_RB_BASE, 0x80, 0x10, 15, 1),
+	PIN_FIELD_BASE(63, 63, IOCFG_RB_BASE, 0x80, 0x10, 14, 1),
+	PIN_FIELD_BASE(64, 64, IOCFG_RB_BASE, 0x80, 0x10, 13, 1),
+	PIN_FIELD_BASE(65, 65, IOCFG_RB_BASE, 0x80, 0x10, 16, 1),
+	PIN_FIELD_BASE(66, 68, IOCFG_LB_BASE, 0x60, 0x10, 2, 1),
+};
+
+static const struct mtk_pin_reg_calc mt7986_reg_cals[] = {
+	[PINCTRL_PIN_REG_MODE] = MTK_RANGE(mt7986_pin_mode_range),
+	[PINCTRL_PIN_REG_DIR] = MTK_RANGE(mt7986_pin_dir_range),
+	[PINCTRL_PIN_REG_DI] = MTK_RANGE(mt7986_pin_di_range),
+	[PINCTRL_PIN_REG_DO] = MTK_RANGE(mt7986_pin_do_range),
+	[PINCTRL_PIN_REG_SMT] = MTK_RANGE(mt7986_pin_smt_range),
+	[PINCTRL_PIN_REG_IES] = MTK_RANGE(mt7986_pin_ies_range),
+	[PINCTRL_PIN_REG_DRV] = MTK_RANGE(mt7986_pin_drv_range),
+	[PINCTRL_PIN_REG_PU] = MTK_RANGE(mt7986_pin_pu_range),
+	[PINCTRL_PIN_REG_PD] = MTK_RANGE(mt7986_pin_pd_range),
+	[PINCTRL_PIN_REG_PUPD] = MTK_RANGE(mt7986_pin_pupd_range),
+	[PINCTRL_PIN_REG_R0] = MTK_RANGE(mt7986_pin_r0_range),
+	[PINCTRL_PIN_REG_R1] = MTK_RANGE(mt7986_pin_r1_range),
+};
+
+static const struct mtk_pin_desc mt7986a_pins[] = {
+	MT7986_PIN(0, "SYS_WATCHDOG"),
+	MT7986_PIN(1, "WF2G_LED"),
+	MT7986_PIN(2, "WF5G_LED"),
+	MT7986_PIN(3, "I2C_SCL"),
+	MT7986_PIN(4, "I2C_SDA"),
+	MT7986_PIN(5, "GPIO_0"),
+	MT7986_PIN(6, "GPIO_1"),
+	MT7986_PIN(7, "GPIO_2"),
+	MT7986_PIN(8, "GPIO_3"),
+	MT7986_PIN(9, "GPIO_4"),
+	MT7986_PIN(10, "GPIO_5"),
+	MT7986_PIN(11, "GPIO_6"),
+	MT7986_PIN(12, "GPIO_7"),
+	MT7986_PIN(13, "GPIO_8"),
+	MT7986_PIN(14, "GPIO_9"),
+	MT7986_PIN(15, "GPIO_10"),
+	MT7986_PIN(16, "GPIO_11"),
+	MT7986_PIN(17, "GPIO_12"),
+	MT7986_PIN(18, "GPIO_13"),
+	MT7986_PIN(19, "GPIO_14"),
+	MT7986_PIN(20, "GPIO_15"),
+	MT7986_PIN(21, "PWM0"),
+	MT7986_PIN(22, "PWM1"),
+	MT7986_PIN(23, "SPI0_CLK"),
+	MT7986_PIN(24, "SPI0_MOSI"),
+	MT7986_PIN(25, "SPI0_MISO"),
+	MT7986_PIN(26, "SPI0_CS"),
+	MT7986_PIN(27, "SPI0_HOLD"),
+	MT7986_PIN(28, "SPI0_WP"),
+	MT7986_PIN(29, "SPI1_CLK"),
+	MT7986_PIN(30, "SPI1_MOSI"),
+	MT7986_PIN(31, "SPI1_MISO"),
+	MT7986_PIN(32, "SPI1_CS"),
+	MT7986_PIN(33, "SPI2_CLK"),
+	MT7986_PIN(34, "SPI2_MOSI"),
+	MT7986_PIN(35, "SPI2_MISO"),
+	MT7986_PIN(36, "SPI2_CS"),
+	MT7986_PIN(37, "SPI2_HOLD"),
+	MT7986_PIN(38, "SPI2_WP"),
+	MT7986_PIN(39, "UART0_RXD"),
+	MT7986_PIN(40, "UART0_TXD"),
+	MT7986_PIN(41, "PCIE_PERESET_N"),
+	MT7986_PIN(42, "UART1_RXD"),
+	MT7986_PIN(43, "UART1_TXD"),
+	MT7986_PIN(44, "UART1_CTS"),
+	MT7986_PIN(45, "UART1_RTS"),
+	MT7986_PIN(46, "UART2_RXD"),
+	MT7986_PIN(47, "UART2_TXD"),
+	MT7986_PIN(48, "UART2_CTS"),
+	MT7986_PIN(49, "UART2_RTS"),
+	MT7986_PIN(50, "EMMC_DATA_0"),
+	MT7986_PIN(51, "EMMC_DATA_1"),
+	MT7986_PIN(52, "EMMC_DATA_2"),
+	MT7986_PIN(53, "EMMC_DATA_3"),
+	MT7986_PIN(54, "EMMC_DATA_4"),
+	MT7986_PIN(55, "EMMC_DATA_5"),
+	MT7986_PIN(56, "EMMC_DATA_6"),
+	MT7986_PIN(57, "EMMC_DATA_7"),
+	MT7986_PIN(58, "EMMC_CMD"),
+	MT7986_PIN(59, "EMMC_CK"),
+	MT7986_PIN(60, "EMMC_DSL"),
+	MT7986_PIN(61, "EMMC_RSTB"),
+	MT7986_PIN(62, "PCM_DTX"),
+	MT7986_PIN(63, "PCM_DRX"),
+	MT7986_PIN(64, "PCM_CLK"),
+	MT7986_PIN(65, "PCM_FS"),
+	MT7986_PIN(66, "MT7531_INT"),
+	MT7986_PIN(67, "SMI_MDC"),
+	MT7986_PIN(68, "SMI_MDIO"),
+	MT7986_PIN(69, "WF0_DIG_RESETB"),
+	MT7986_PIN(70, "WF0_CBA_RESETB"),
+	MT7986_PIN(71, "WF0_XO_REQ"),
+	MT7986_PIN(72, "WF0_TOP_CLK"),
+	MT7986_PIN(73, "WF0_TOP_DATA"),
+	MT7986_PIN(74, "WF0_HB1"),
+	MT7986_PIN(75, "WF0_HB2"),
+	MT7986_PIN(76, "WF0_HB3"),
+	MT7986_PIN(77, "WF0_HB4"),
+	MT7986_PIN(78, "WF0_HB0"),
+	MT7986_PIN(79, "WF0_HB0_B"),
+	MT7986_PIN(80, "WF0_HB5"),
+	MT7986_PIN(81, "WF0_HB6"),
+	MT7986_PIN(82, "WF0_HB7"),
+	MT7986_PIN(83, "WF0_HB8"),
+	MT7986_PIN(84, "WF0_HB9"),
+	MT7986_PIN(85, "WF0_HB10"),
+	MT7986_PIN(86, "WF1_DIG_RESETB"),
+	MT7986_PIN(87, "WF1_CBA_RESETB"),
+	MT7986_PIN(88, "WF1_XO_REQ"),
+	MT7986_PIN(89, "WF1_TOP_CLK"),
+	MT7986_PIN(90, "WF1_TOP_DATA"),
+	MT7986_PIN(91, "WF1_HB1"),
+	MT7986_PIN(92, "WF1_HB2"),
+	MT7986_PIN(93, "WF1_HB3"),
+	MT7986_PIN(94, "WF1_HB4"),
+	MT7986_PIN(95, "WF1_HB0"),
+	MT7986_PIN(96, "WF1_HB0_B"),
+	MT7986_PIN(97, "WF1_HB5"),
+	MT7986_PIN(98, "WF1_HB6"),
+	MT7986_PIN(99, "WF1_HB7"),
+	MT7986_PIN(100, "WF1_HB8"),
+};
+
+static const struct mtk_pin_desc mt7986b_pins[] = {
+	MT7986_PIN(0, "SYS_WATCHDOG"),
+	MT7986_PIN(1, "WF2G_LED"),
+	MT7986_PIN(2, "WF5G_LED"),
+	MT7986_PIN(3, "I2C_SCL"),
+	MT7986_PIN(4, "I2C_SDA"),
+	MT7986_PIN(5, "GPIO_0"),
+	MT7986_PIN(6, "GPIO_1"),
+	MT7986_PIN(7, "GPIO_2"),
+	MT7986_PIN(8, "GPIO_3"),
+	MT7986_PIN(9, "GPIO_4"),
+	MT7986_PIN(10, "GPIO_5"),
+	MT7986_PIN(11, "GPIO_6"),
+	MT7986_PIN(12, "GPIO_7"),
+	MT7986_PIN(13, "GPIO_8"),
+	MT7986_PIN(14, "GPIO_9"),
+	MT7986_PIN(15, "GPIO_10"),
+	MT7986_PIN(16, "GPIO_11"),
+	MT7986_PIN(17, "GPIO_12"),
+	MT7986_PIN(18, "GPIO_13"),
+	MT7986_PIN(19, "GPIO_14"),
+	MT7986_PIN(20, "GPIO_15"),
+	MT7986_PIN(21, "PWM0"),
+	MT7986_PIN(22, "PWM1"),
+	MT7986_PIN(23, "SPI0_CLK"),
+	MT7986_PIN(24, "SPI0_MOSI"),
+	MT7986_PIN(25, "SPI0_MISO"),
+	MT7986_PIN(26, "SPI0_CS"),
+	MT7986_PIN(27, "SPI0_HOLD"),
+	MT7986_PIN(28, "SPI0_WP"),
+	MT7986_PIN(29, "SPI1_CLK"),
+	MT7986_PIN(30, "SPI1_MOSI"),
+	MT7986_PIN(31, "SPI1_MISO"),
+	MT7986_PIN(32, "SPI1_CS"),
+	MT7986_PIN(33, "SPI2_CLK"),
+	MT7986_PIN(34, "SPI2_MOSI"),
+	MT7986_PIN(35, "SPI2_MISO"),
+	MT7986_PIN(36, "SPI2_CS"),
+	MT7986_PIN(37, "SPI2_HOLD"),
+	MT7986_PIN(38, "SPI2_WP"),
+	MT7986_PIN(39, "UART0_RXD"),
+	MT7986_PIN(40, "UART0_TXD"),
+	MT7986_NOT_BALLOUT_PIN(41),
+	MT7986_NOT_BALLOUT_PIN(42),
+	MT7986_NOT_BALLOUT_PIN(43),
+	MT7986_NOT_BALLOUT_PIN(44),
+	MT7986_NOT_BALLOUT_PIN(45),
+	MT7986_NOT_BALLOUT_PIN(46),
+	MT7986_NOT_BALLOUT_PIN(47),
+	MT7986_NOT_BALLOUT_PIN(48),
+	MT7986_NOT_BALLOUT_PIN(49),
+	MT7986_NOT_BALLOUT_PIN(50),
+	MT7986_NOT_BALLOUT_PIN(51),
+	MT7986_NOT_BALLOUT_PIN(52),
+	MT7986_NOT_BALLOUT_PIN(53),
+	MT7986_NOT_BALLOUT_PIN(54),
+	MT7986_NOT_BALLOUT_PIN(55),
+	MT7986_NOT_BALLOUT_PIN(56),
+	MT7986_NOT_BALLOUT_PIN(57),
+	MT7986_NOT_BALLOUT_PIN(58),
+	MT7986_NOT_BALLOUT_PIN(59),
+	MT7986_NOT_BALLOUT_PIN(60),
+	MT7986_NOT_BALLOUT_PIN(61),
+	MT7986_NOT_BALLOUT_PIN(62),
+	MT7986_NOT_BALLOUT_PIN(63),
+	MT7986_NOT_BALLOUT_PIN(64),
+	MT7986_NOT_BALLOUT_PIN(65),
+	MT7986_PIN(66, "MT7531_INT"),
+	MT7986_PIN(67, "SMI_MDC"),
+	MT7986_PIN(68, "SMI_MDIO"),
+	MT7986_PIN(69, "WF0_DIG_RESETB"),
+	MT7986_PIN(70, "WF0_CBA_RESETB"),
+	MT7986_PIN(71, "WF0_XO_REQ"),
+	MT7986_PIN(72, "WF0_TOP_CLK"),
+	MT7986_PIN(73, "WF0_TOP_DATA"),
+	MT7986_PIN(74, "WF0_HB1"),
+	MT7986_PIN(75, "WF0_HB2"),
+	MT7986_PIN(76, "WF0_HB3"),
+	MT7986_PIN(77, "WF0_HB4"),
+	MT7986_PIN(78, "WF0_HB0"),
+	MT7986_PIN(79, "WF0_HB0_B"),
+	MT7986_PIN(80, "WF0_HB5"),
+	MT7986_PIN(81, "WF0_HB6"),
+	MT7986_PIN(82, "WF0_HB7"),
+	MT7986_PIN(83, "WF0_HB8"),
+	MT7986_PIN(84, "WF0_HB9"),
+	MT7986_PIN(85, "WF0_HB10"),
+	MT7986_PIN(86, "WF1_DIG_RESETB"),
+	MT7986_PIN(87, "WF1_CBA_RESETB"),
+	MT7986_PIN(88, "WF1_XO_REQ"),
+	MT7986_PIN(89, "WF1_TOP_CLK"),
+	MT7986_PIN(90, "WF1_TOP_DATA"),
+	MT7986_PIN(91, "WF1_HB1"),
+	MT7986_PIN(92, "WF1_HB2"),
+	MT7986_PIN(93, "WF1_HB3"),
+	MT7986_PIN(94, "WF1_HB4"),
+	MT7986_PIN(95, "WF1_HB0"),
+	MT7986_PIN(96, "WF1_HB0_B"),
+	MT7986_PIN(97, "WF1_HB5"),
+	MT7986_PIN(98, "WF1_HB6"),
+	MT7986_PIN(99, "WF1_HB7"),
+	MT7986_PIN(100, "WF1_HB8"),
+};
+
+/* List all groups consisting of these pins dedicated to the enablement of
+ * certain hardware block and the corresponding mode for all of the pins.
+ * The hardware probably has multiple combinations of these pinouts.
+ */
+
+static int mt7986_watchdog_pins[] = { 0, };
+static int mt7986_watchdog_funcs[] = { 1, };
+
+static int mt7986_wifi_led_pins[] = { 1, 2, };
+static int mt7986_wifi_led_funcs[] = { 1, 1, };
+
+static int mt7986_i2c_pins[] = { 3, 4, };
+static int mt7986_i2c_funcs[] = { 1, 1, };
+
+static int mt7986_uart1_0_pins[] = { 7, 8, 9, 10, };
+static int mt7986_uart1_0_funcs[] = { 3, 3, 3, 3, };
+
+static int mt7986_spi1_0_pins[] = { 11, 12, 13, 14, };
+static int mt7986_spi1_0_funcs[] = { 3, 3, 3, 3, };
+
+static int mt7986_pwm1_1_pins[] = { 20, };
+static int mt7986_pwm1_1_funcs[] = { 2, };
+
+static int mt7986_pwm0_pins[] = { 21, };
+static int mt7986_pwm0_funcs[] = { 1, };
+
+static int mt7986_pwm1_0_pins[] = { 22, };
+static int mt7986_pwm1_0_funcs[] = { 1, };
+
+static int mt7986_emmc_45_pins[] = {
+	22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, };
+static int mt7986_emmc_45_funcs[] = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, };
+
+static int mt7986_snfi_pins[] = { 23, 24, 25, 26, 27, 28, };
+static int mt7986_snfi_funcs[] = { 1, 1, 1, 1, 1, 1, };
+
+static int mt7986_spi1_1_pins[] = { 23, 24, 25, 26, };
+static int mt7986_spi1_1_funcs[] = { 3, 3, 3, 3, };
+
+static int mt7986_uart1_1_pins[] = { 23, 24, 25, 26, };
+static int mt7986_uart1_1_funcs[] = { 4, 4, 4, 4, };
+
+static int mt7986_spi1_2_pins[] = { 29, 30, 31, 32, };
+static int mt7986_spi1_2_funcs[] = { 1, 1, 1, 1, };
+
+static int mt7986_uart1_2_pins[] = { 29, 30, 31, 32, };
+static int mt7986_uart1_2_funcs[] = { 3, 3, 3, 3, };
+
+static int mt7986_uart2_0_pins[] = { 29, 30, 31, 32, };
+static int mt7986_uart2_0_funcs[] = { 4, 4, 4, 4, };
+
+static int mt7986_spi0_pins[] = { 33, 34, 35, 36, };
+static int mt7986_spi0_funcs[] = { 1, 1, 1, 1, };
+
+static int mt7986_spi0_wp_hold_pins[] = { 37, 38, };
+static int mt7986_spi0_wp_hold_funcs[] = { 1, 1, };
+
+static int mt7986_uart2_1_pins[] = { 33, 34, 35, 36, };
+static int mt7986_uart2_1_funcs[] = { 3, 3, 3, 3, };
+
+static int mt7986_uart1_3_rx_tx_pins[] = { 35, 36, };
+static int mt7986_uart1_3_rx_tx_funcs[] = { 2, 2, };
+
+static int mt7986_uart1_3_cts_rts_pins[] = { 37, 38, };
+static int mt7986_uart1_3_cts_rts_funcs[] = { 2, 2, };
+
+static int mt7986_spi1_3_pins[] = { 33, 34, 35, 36, };
+static int mt7986_spi1_3_funcs[] = { 4, 4, 4, 4, };
+
+static int mt7986_uart0_pins[] = { 39, 40, };
+static int mt7986_uart0_funcs[] = { 1, 1, };
+
+static int mt7986_pcie_reset_pins[] = { 41, };
+static int mt7986_pcie_reset_funcs[] = { 1, };
+
+static int mt7986_uart1_pins[] = { 42, 43, 44, 45, };
+static int mt7986_uart1_funcs[] = { 1, 1, 1, 1, };
+
+static int mt7986_uart2_pins[] = { 46, 47, 48, 49, };
+static int mt7986_uart2_funcs[] = { 1, 1, 1, 1, };
+
+static int mt7986_emmc_51_pins[] = {
+	50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, };
+static int mt7986_emmc_51_funcs[] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, };
+
+static int mt7986_pcm_pins[] = { 62, 63, 64, 65, };
+static int mt7986_pcm_funcs[] = { 1, 1, 1, 1, };
+
+static int mt7986_i2s_pins[] = { 62, 63, 64, 65, };
+static int mt7986_i2s_funcs[] = { 1, 1, 1, 1, };
+
+static int mt7986_switch_int_pins[] = { 66, };
+static int mt7986_switch_int_funcs[] = { 1, };
+
+static int mt7986_mdc_mdio_pins[] = { 67, 68, };
+static int mt7986_mdc_mdio_funcs[] = { 1, 1, };
+
+static int mt7986_wf_2g_pins[] = {74, 75, 76, 77, 78, 79, 80, 81, 82, 83, };
+static int mt7986_wf_2g_funcs[] = {1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, };
+
+static int mt7986_wf_5g_pins[] = {91, 92, 93, 94, 95, 96, 97, 98, 99, 100, };
+static int mt7986_wf_5g_funcs[] = {1, 1, 1, 1, 1, 1, 1, 1, 1, 1, };
+
+static int mt7986_wf_dbdc_pins[] = {
+	74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, };
+static int mt7986_wf_dbdc_funcs[] = {
+	2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, };
+
+static int mt7986_pcie_clk_pins[] = { 9, };
+static int mt7986_pcie_clk_funcs[] = { 1, };
+
+static int mt7986_pcie_wake_pins[] = { 10, };
+static int mt7986_pcie_wake_funcs[] = { 1, };
+
+static const struct group_desc mt7986_groups[] = {
+	PINCTRL_PIN_GROUP("watchdog", mt7986_watchdog),
+	PINCTRL_PIN_GROUP("wifi_led", mt7986_wifi_led),
+	PINCTRL_PIN_GROUP("i2c", mt7986_i2c),
+	PINCTRL_PIN_GROUP("uart1_0", mt7986_uart1_0),
+	PINCTRL_PIN_GROUP("pcie_clk", mt7986_pcie_clk),
+	PINCTRL_PIN_GROUP("pcie_wake", mt7986_pcie_wake),
+	PINCTRL_PIN_GROUP("spi1_0", mt7986_spi1_0),
+	PINCTRL_PIN_GROUP("pwm1_1", mt7986_pwm1_1),
+	PINCTRL_PIN_GROUP("pwm0", mt7986_pwm0),
+	PINCTRL_PIN_GROUP("pwm1_0", mt7986_pwm1_0),
+	PINCTRL_PIN_GROUP("emmc_45", mt7986_emmc_45),
+	PINCTRL_PIN_GROUP("snfi", mt7986_snfi),
+	PINCTRL_PIN_GROUP("spi1_1", mt7986_spi1_1),
+	PINCTRL_PIN_GROUP("uart1_1", mt7986_uart1_1),
+	PINCTRL_PIN_GROUP("spi1_2", mt7986_spi1_2),
+	PINCTRL_PIN_GROUP("uart1_2", mt7986_uart1_2),
+	PINCTRL_PIN_GROUP("uart2_0", mt7986_uart2_0),
+	PINCTRL_PIN_GROUP("spi0", mt7986_spi0),
+	PINCTRL_PIN_GROUP("spi0_wp_hold", mt7986_spi0_wp_hold),
+	PINCTRL_PIN_GROUP("uart2_1", mt7986_uart2_1),
+	PINCTRL_PIN_GROUP("uart1_3_rx_tx", mt7986_uart1_3_rx_tx),
+	PINCTRL_PIN_GROUP("uart1_3_cts_rts", mt7986_uart1_3_cts_rts),
+	PINCTRL_PIN_GROUP("spi1_3", mt7986_spi1_3),
+	PINCTRL_PIN_GROUP("uart0", mt7986_uart0),
+	PINCTRL_PIN_GROUP("switch_int", mt7986_switch_int),
+	PINCTRL_PIN_GROUP("mdc_mdio", mt7986_mdc_mdio),
+	PINCTRL_PIN_GROUP("pcie_pereset", mt7986_pcie_reset),
+	PINCTRL_PIN_GROUP("uart1", mt7986_uart1),
+	PINCTRL_PIN_GROUP("uart2", mt7986_uart2),
+	PINCTRL_PIN_GROUP("emmc_51", mt7986_emmc_51),
+	PINCTRL_PIN_GROUP("pcm", mt7986_pcm),
+	PINCTRL_PIN_GROUP("i2s", mt7986_i2s),
+	PINCTRL_PIN_GROUP("wf_2g", mt7986_wf_2g),
+	PINCTRL_PIN_GROUP("wf_5g", mt7986_wf_5g),
+	PINCTRL_PIN_GROUP("wf_dbdc", mt7986_wf_dbdc),
+};
+
+/* Joint those groups owning the same capability in user point of view which
+ * allows that people tend to use through the device tree.
+ */
+
+static const char *mt7986_audio_groups[] = { "pcm", "i2s" };
+static const char *mt7986_emmc_groups[] = {
+	"emmc_45", "emmc_51", };
+static const char *mt7986_ethernet_groups[] = {
+	"switch_int", "mdc_mdio", };
+static const char *mt7986_i2c_groups[] = { "i2c", };
+static const char *mt7986_led_groups[] = { "wifi_led", };
+static const char *mt7986_flash_groups[] = { "snfi", };
+static const char *mt7986_pcie_groups[] = {
+	"pcie_clk", "pcie_wake", "pcie_pereset" };
+static const char *mt7986_pwm_groups[] = { "pwm0", "pwm1_0", "pwm1_1", };
+static const char *mt7986_spi_groups[] = {
+	"spi0", "spi0_wp_hold", "spi1_0", "spi1_1", "spi1_2", "spi1_3", };
+static const char *mt7986_uart_groups[] = {
+	"uart1_0", "uart1_1", "uart1_2", "uart1_3_rx_tx", "uart1_3_cts_rts",
+	"uart2_0", "uart2_1", "uart0", "uart1", "uart2",
+};
+static const char *mt7986_wdt_groups[] = { "watchdog", };
+static const char *mt7986_wf_groups[] = { "wf_2g", "wf_5g", "wf_dbdc", };
+
+static const struct function_desc mt7986_functions[] = {
+	{"audio", mt7986_audio_groups, ARRAY_SIZE(mt7986_audio_groups)},
+	{"emmc", mt7986_emmc_groups, ARRAY_SIZE(mt7986_emmc_groups)},
+	{"eth", mt7986_ethernet_groups, ARRAY_SIZE(mt7986_ethernet_groups)},
+	{"i2c", mt7986_i2c_groups, ARRAY_SIZE(mt7986_i2c_groups)},
+	{"led", mt7986_led_groups, ARRAY_SIZE(mt7986_led_groups)},
+	{"flash", mt7986_flash_groups, ARRAY_SIZE(mt7986_flash_groups)},
+	{"pcie", mt7986_pcie_groups, ARRAY_SIZE(mt7986_pcie_groups)},
+	{"pwm", mt7986_pwm_groups, ARRAY_SIZE(mt7986_pwm_groups)},
+	{"spi", mt7986_spi_groups, ARRAY_SIZE(mt7986_spi_groups)},
+	{"uart", mt7986_uart_groups, ARRAY_SIZE(mt7986_uart_groups)},
+	{"watchdog", mt7986_wdt_groups, ARRAY_SIZE(mt7986_wdt_groups)},
+	{"wifi", mt7986_wf_groups, ARRAY_SIZE(mt7986_wf_groups)},
+};
+
+static const struct mtk_eint_hw mt7986a_eint_hw = {
+	.port_mask = 7,
+	.ports = 7,
+	.ap_num = ARRAY_SIZE(mt7986a_pins),
+	.db_cnt = 16,
+};
+
+static const struct mtk_eint_hw mt7986b_eint_hw = {
+	.port_mask = 7,
+	.ports = 7,
+	.ap_num = ARRAY_SIZE(mt7986b_pins),
+	.db_cnt = 16,
+};
+
+static struct mtk_pin_soc mt7986a_data = {
+	.reg_cal = mt7986_reg_cals,
+	.pins = mt7986a_pins,
+	.npins = ARRAY_SIZE(mt7986a_pins),
+	.grps = mt7986_groups,
+	.ngrps = ARRAY_SIZE(mt7986_groups),
+	.funcs = mt7986_functions,
+	.nfuncs = ARRAY_SIZE(mt7986_functions),
+	.eint_hw = &mt7986a_eint_hw,
+	.gpio_m = 0,
+	.ies_present = false,
+	.base_names = mt7986_pinctrl_register_base_names,
+	.nbase_names = ARRAY_SIZE(mt7986_pinctrl_register_base_names),
+	.bias_set_combo = mtk_pinconf_bias_set_combo,
+	.bias_get_combo = mtk_pinconf_bias_get_combo,
+	.drive_set = mtk_pinconf_drive_set_rev1,
+	.drive_get = mtk_pinconf_drive_get_rev1,
+	.adv_pull_get = mtk_pinconf_adv_pull_get,
+	.adv_pull_set = mtk_pinconf_adv_pull_set,
+};
+
+static struct mtk_pin_soc mt7986b_data = {
+	.reg_cal = mt7986_reg_cals,
+	.pins = mt7986b_pins,
+	.npins = ARRAY_SIZE(mt7986b_pins),
+	.grps = mt7986_groups,
+	.ngrps = ARRAY_SIZE(mt7986_groups),
+	.funcs = mt7986_functions,
+	.nfuncs = ARRAY_SIZE(mt7986_functions),
+	.eint_hw = &mt7986b_eint_hw,
+	.gpio_m = 0,
+	.ies_present = false,
+	.base_names = mt7986_pinctrl_register_base_names,
+	.nbase_names = ARRAY_SIZE(mt7986_pinctrl_register_base_names),
+	.bias_set_combo = mtk_pinconf_bias_set_combo,
+	.bias_get_combo = mtk_pinconf_bias_get_combo,
+	.drive_set = mtk_pinconf_drive_set_rev1,
+	.drive_get = mtk_pinconf_drive_get_rev1,
+	.adv_pull_get = mtk_pinconf_adv_pull_get,
+	.adv_pull_set = mtk_pinconf_adv_pull_set,
+};
+
+static const struct of_device_id mt7986a_pinctrl_of_match[] = {
+	{.compatible = "mediatek,mt7986a-pinctrl",},
+	{}
+};
+
+static const struct of_device_id mt7986b_pinctrl_of_match[] = {
+	{.compatible = "mediatek,mt7986b-pinctrl",},
+	{}
+};
+
+static int mt7986a_pinctrl_probe(struct platform_device *pdev)
+{
+	return mtk_moore_pinctrl_probe(pdev, &mt7986a_data);
+}
+
+static int mt7986b_pinctrl_probe(struct platform_device *pdev)
+{
+	return mtk_moore_pinctrl_probe(pdev, &mt7986b_data);
+}
+
+static struct platform_driver mt7986a_pinctrl_driver = {
+	.driver = {
+		.name = "mt7986a-pinctrl",
+		.of_match_table = mt7986a_pinctrl_of_match,
+	},
+	.probe = mt7986a_pinctrl_probe,
+};
+
+static struct platform_driver mt7986b_pinctrl_driver = {
+	.driver = {
+		.name = "mt7986b-pinctrl",
+		.of_match_table = mt7986b_pinctrl_of_match,
+	},
+	.probe = mt7986b_pinctrl_probe,
+};
+
+static int __init mt7986a_pinctrl_init(void)
+{
+	return platform_driver_register(&mt7986a_pinctrl_driver);
+}
+
+static int __init mt7986b_pinctrl_init(void)
+{
+	return platform_driver_register(&mt7986b_pinctrl_driver);
+}
+
+arch_initcall(mt7986a_pinctrl_init);
+arch_initcall(mt7986b_pinctrl_init);
-- 
2.29.2


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [RESEND,v2,7/9] dt-bindings: arm64: dts: mediatek: Add mt7986 series
  2021-09-14  8:51 [v3,0/9] Add basic SoC support for mediatek mt7986 Sam Shih
                   ` (5 preceding siblings ...)
  2021-09-14  8:51 ` [v4,6/9] pinctrl: mediatek: add support " Sam Shih
@ 2021-09-14  8:51 ` Sam Shih
  2021-09-14 18:00   ` Matthias Brugger
  2021-09-14  8:51 ` [RESEND,v2,8/9] arm64: dts: mediatek: add mt7986a support Sam Shih
  2021-09-14  8:51 ` [RESEND,v2,9/9] arm64: dts: mediatek: add mt7986b support Sam Shih
  8 siblings, 1 reply; 34+ messages in thread
From: Sam Shih @ 2021-09-14  8:51 UTC (permalink / raw)
  To: Rob Herring, Sean Wang, Linus Walleij, Matthias Brugger,
	Matt Mackall, Herbert Xu, Greg Kroah-Hartman, Wim Van Sebroeck,
	Guenter Roeck, Michael Turquette, Stephen Boyd, Hsin-Yi Wang,
	Enric Balletbo i Serra, Fabien Parent, Seiya Wang, devicetree,
	linux-kernel, linux-mediatek, linux-gpio, linux-arm-kernel,
	linux-crypto, linux-serial, linux-watchdog, linux-clk
  Cc: John Crispin, Ryder Lee, Sam Shih

MT7986 is Mediatek's new 4-core SoC, which is mainly for wifi-router
application. The difference between mt7986a and mt7986b is that some
pins do not exist on mt7986b.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>

---
v2: added an Acked-by tag
---
 Documentation/devicetree/bindings/arm/mediatek.yaml | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml
index 80a05f6fee85..a9a778269684 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek.yaml
@@ -76,6 +76,14 @@ properties:
           - enum:
               - mediatek,mt7629-rfb
           - const: mediatek,mt7629
+      - items:
+          - enum:
+              - mediatek,mt7986a-rfb
+          - const: mediatek,mt7986a
+      - items:
+          - enum:
+              - mediatek,mt7986b-rfb
+          - const: mediatek,mt7986b
       - items:
           - enum:
               - mediatek,mt8127-moose
-- 
2.29.2


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [RESEND,v2,8/9] arm64: dts: mediatek: add mt7986a support
  2021-09-14  8:51 [v3,0/9] Add basic SoC support for mediatek mt7986 Sam Shih
                   ` (6 preceding siblings ...)
  2021-09-14  8:51 ` [RESEND,v2,7/9] dt-bindings: arm64: dts: mediatek: Add mt7986 series Sam Shih
@ 2021-09-14  8:51 ` Sam Shih
  2021-09-14 17:55   ` Matthias Brugger
  2021-09-14  8:51 ` [RESEND,v2,9/9] arm64: dts: mediatek: add mt7986b support Sam Shih
  8 siblings, 1 reply; 34+ messages in thread
From: Sam Shih @ 2021-09-14  8:51 UTC (permalink / raw)
  To: Rob Herring, Sean Wang, Linus Walleij, Matthias Brugger,
	Matt Mackall, Herbert Xu, Greg Kroah-Hartman, Wim Van Sebroeck,
	Guenter Roeck, Michael Turquette, Stephen Boyd, Hsin-Yi Wang,
	Enric Balletbo i Serra, Fabien Parent, Seiya Wang, devicetree,
	linux-kernel, linux-mediatek, linux-gpio, linux-arm-kernel,
	linux-crypto, linux-serial, linux-watchdog, linux-clk
  Cc: John Crispin, Ryder Lee, Sam Shih

Add basic chip support for Mediatek mt7986a, include
uart nodes with correct clocks, rng node with correct clock,
and watchdog node and mt7986a pinctrl node.

Add cpu node, timer node, gic node, psci and reserved-memory node
for ARM Trusted Firmware,

Add clock controller nodes, include 40M clock source, topckgen, infracfg,
apmixedsys and ethernet subsystem.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>

---
v2: modified clock and uart node due to clock driver updated
---
 arch/arm64/boot/dts/mediatek/Makefile        |   1 +
 arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts |  49 ++++
 arch/arm64/boot/dts/mediatek/mt7986a.dtsi    | 227 +++++++++++++++++++
 3 files changed, 277 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a.dtsi

diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 4f68ebed2e31..e6c3a73b9e4a 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-rfb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8167-pumpkin.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
new file mode 100644
index 000000000000..a58347c09ab2
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+/dts-v1/;
+#include "mt7986a.dtsi"
+
+/ {
+	model = "MediaTek MT7986a RFB";
+	compatible = "mediatek,mt7986a-rfb";
+	chosen {
+		bootargs = "console=ttyS0,115200n1 loglevel=8  \
+				earlycon=uart8250,mmio32,0x11002000";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&pio {
+	uart1_pins: uart1-pins-42-to-45 {
+		mux {
+			function = "uart";
+			groups = "uart1";
+		};
+	};
+
+	uart2_pins: uart1-pins-46-to-49 {
+		mux {
+			function = "uart";
+			groups = "uart2";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
new file mode 100644
index 000000000000..dfe3e7101031
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/mt7986-clk.h>
+
+/ {
+	compatible = "mediatek,mt7986a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clk40m: oscillator@0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <40000000>;
+		clock-output-names = "clkxtal";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			enable-method = "psci";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	psci {
+		compatible  = "arm,psci-0.2";
+		method      = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
+		secmon_reserved: secmon@43000000 {
+			reg = <0 0x43000000 0 0x30000>;
+			no-map;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		clock-frequency = <13000000>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x0c000000 0 0x40000>,
+			      <0 0x0c080000 0 0x200000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		infracfg: infracfg@10001000 {
+			compatible = "mediatek,mt7986-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		topckgen: topckgen@1001b000 {
+			compatible = "mediatek,mt7986-topckgen", "syscon";
+			reg = <0 0x1001B000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		watchdog: watchdog@1001c000 {
+			compatible = "mediatek,mt7986-wdt",
+				     "mediatek,mt6589-wdt";
+			reg = <0 0x1001c000 0 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			#reset-cells = <1>;
+			status = "disabled";
+		};
+
+		apmixedsys: apmixedsys@1001e000 {
+			compatible = "mediatek,mt7986-apmixedsys";
+			reg = <0 0x1001E000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pio: pinctrl@1001f000 {
+			compatible = "mediatek,mt7986a-pinctrl";
+			reg = <0 0x1001f000 0 0x1000>,
+			      <0 0x11c30000 0 0x1000>,
+			      <0 0x11c40000 0 0x1000>,
+			      <0 0x11e20000 0 0x1000>,
+			      <0 0x11e30000 0 0x1000>,
+			      <0 0x11f00000 0 0x1000>,
+			      <0 0x11f10000 0 0x1000>,
+			      <0 0x1000b000 0 0x1000>;
+			reg-names = "gpio_base", "iocfg_rt_base", "iocfg_rb_base",
+				    "iocfg_lt_base", "iocfg_lb_base", "iocfg_tr_base",
+				    "iocfg_tl_base", "eint";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pio 0 0 100>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+			#interrupt-cells = <2>;
+		};
+
+		sgmiisys0: syscon@10060000 {
+			compatible = "mediatek,mt7986-sgmiisys_0",
+				     "syscon";
+			reg = <0 0x10060000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		sgmiisys1: syscon@10070000 {
+			compatible = "mediatek,mt7986-sgmiisys_1",
+				     "syscon";
+			reg = <0 0x10070000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		trng: trng@1020f000 {
+			compatible = "mediatek,mt7986-rng",
+				     "mediatek,mt7623-rng";
+			reg = <0 0x1020f000 0 0x100>;
+			clocks = <&infracfg CLK_INFRA_TRNG_CK>;
+			clock-names = "rng";
+			status = "disabled";
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11002000 0 0x400>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_UART0_SEL>,
+				 <&infracfg CLK_INFRA_UART0_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&topckgen CLK_TOP_UART_SEL>,
+					  <&infracfg CLK_INFRA_UART0_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_XTAL>,
+						 <&topckgen CLK_TOP_UART_SEL>;
+			status = "disabled";
+		};
+
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11003000 0 0x400>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_UART1_SEL>,
+				 <&infracfg CLK_INFRA_UART1_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&infracfg CLK_INFRA_UART1_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_F26M_SEL>;
+			status = "disabled";
+		};
+
+		uart2: serial@11004000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11004000 0 0x400>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_UART2_SEL>,
+				 <&infracfg CLK_INFRA_UART2_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&infracfg CLK_INFRA_UART2_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_F26M_SEL>;
+			status = "disabled";
+		};
+
+		ethsys: syscon@15000000 {
+			 #address-cells = <1>;
+			 #size-cells = <1>;
+			 compatible = "mediatek,mt7986-ethsys",
+				      "syscon";
+			 reg = <0 0x15000000 0 0x1000>;
+			 #clock-cells = <1>;
+			 #reset-cells = <1>;
+		};
+
+	};
+
+};
-- 
2.29.2


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [RESEND,v2,9/9] arm64: dts: mediatek: add mt7986b support
  2021-09-14  8:51 [v3,0/9] Add basic SoC support for mediatek mt7986 Sam Shih
                   ` (7 preceding siblings ...)
  2021-09-14  8:51 ` [RESEND,v2,8/9] arm64: dts: mediatek: add mt7986a support Sam Shih
@ 2021-09-14  8:51 ` Sam Shih
  2021-09-24 11:27   ` [v3,9/9] " Sam Shih
  8 siblings, 1 reply; 34+ messages in thread
From: Sam Shih @ 2021-09-14  8:51 UTC (permalink / raw)
  To: Rob Herring, Sean Wang, Linus Walleij, Matthias Brugger,
	Matt Mackall, Herbert Xu, Greg Kroah-Hartman, Wim Van Sebroeck,
	Guenter Roeck, Michael Turquette, Stephen Boyd, Hsin-Yi Wang,
	Enric Balletbo i Serra, Fabien Parent, Seiya Wang, devicetree,
	linux-kernel, linux-mediatek, linux-gpio, linux-arm-kernel,
	linux-crypto, linux-serial, linux-watchdog, linux-clk
  Cc: John Crispin, Ryder Lee, Sam Shih

Add basic chip support for Mediatek mt7986b, include
uart nodes with correct clocks, rng node with correct clock,
and watchdog node and mt7986b pinctrl node.

Add cpu node, timer node, gic node, psci and reserved-memory node
for ARM Trusted Firmware,

Add clock controller nodes, include 40M clock source, topckgen, infracfg,
apmixedsys and ethernet subsystem.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>

---
v2: modified clock and uart node due to clock driver updated
---
 arch/arm64/boot/dts/mediatek/Makefile        |   1 +
 arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts |  21 ++
 arch/arm64/boot/dts/mediatek/mt7986b.dtsi    | 227 +++++++++++++++++++
 3 files changed, 249 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt7986b.dtsi

diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index e6c3a73b9e4a..d555e43d1ccc 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-rfb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986b-rfb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8167-pumpkin.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
new file mode 100644
index 000000000000..8296f1d27e77
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+/dts-v1/;
+#include "mt7986b.dtsi"
+
+/ {
+	model = "MediaTek MT7986b RFB";
+	compatible = "mediatek,mt7986b-rfb";
+	chosen {
+		bootargs = "console=ttyS0,115200n1 loglevel=8  \
+				earlycon=uart8250,mmio32,0x11002000";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986b.dtsi b/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
new file mode 100644
index 000000000000..1fd98fb7ba84
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/mt7986-clk.h>
+
+/ {
+	compatible = "mediatek,mt7986b";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clk40m: oscillator@0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <40000000>;
+		clock-output-names = "clkxtal";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			enable-method = "psci";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	psci {
+		compatible  = "arm,psci-0.2";
+		method      = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
+		secmon_reserved: secmon@43000000 {
+			reg = <0 0x43000000 0 0x30000>;
+			no-map;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		clock-frequency = <13000000>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x0c000000 0 0x40000>,
+			      <0 0x0c080000 0 0x200000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		infracfg: infracfg@10001000 {
+			compatible = "mediatek,mt7986-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		topckgen: topckgen@1001b000 {
+			compatible = "mediatek,mt7986-topckgen", "syscon";
+			reg = <0 0x1001B000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		watchdog: watchdog@1001c000 {
+			compatible = "mediatek,mt7986-wdt",
+				     "mediatek,mt6589-wdt";
+			reg = <0 0x1001c000 0 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			#reset-cells = <1>;
+			status = "disabled";
+		};
+
+		apmixedsys: apmixedsys@1001e000 {
+			compatible = "mediatek,mt7986-apmixedsys";
+			reg = <0 0x1001E000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pio: pinctrl@1001f000 {
+			compatible = "mediatek,mt7986b-pinctrl";
+			reg = <0 0x1001f000 0 0x1000>,
+			      <0 0x11c30000 0 0x1000>,
+			      <0 0x11c40000 0 0x1000>,
+			      <0 0x11e20000 0 0x1000>,
+			      <0 0x11e30000 0 0x1000>,
+			      <0 0x11f00000 0 0x1000>,
+			      <0 0x11f10000 0 0x1000>,
+			      <0 0x1000b000 0 0x1000>;
+			reg-names = "gpio_base", "iocfg_rt_base", "iocfg_rb_base",
+				    "iocfg_lt_base", "iocfg_lb_base", "iocfg_tr_base",
+				    "iocfg_tl_base", "eint";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pio 0 0 41>, <&pio 66 66 35>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+			#interrupt-cells = <2>;
+		};
+
+		sgmiisys0: syscon@10060000 {
+			compatible = "mediatek,mt7986-sgmiisys_0",
+				     "syscon";
+			reg = <0 0x10060000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		sgmiisys1: syscon@10070000 {
+			compatible = "mediatek,mt7986-sgmiisys_1",
+				     "syscon";
+			reg = <0 0x10070000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		trng: trng@1020f000 {
+			compatible = "mediatek,mt7986-rng",
+				     "mediatek,mt7623-rng";
+			reg = <0 0x1020f000 0 0x100>;
+			clocks = <&infracfg CLK_INFRA_TRNG_CK>;
+			clock-names = "rng";
+			status = "disabled";
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11002000 0 0x400>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_UART0_SEL>,
+				 <&infracfg CLK_INFRA_UART0_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&topckgen CLK_TOP_UART_SEL>,
+					  <&infracfg CLK_INFRA_UART0_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_XTAL>,
+						 <&topckgen CLK_TOP_UART_SEL>;
+			status = "disabled";
+		};
+
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11003000 0 0x400>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_UART1_SEL>,
+				 <&infracfg CLK_INFRA_UART1_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&infracfg CLK_INFRA_UART1_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_F26M_SEL>;
+			status = "disabled";
+		};
+
+		uart2: serial@11004000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11004000 0 0x400>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_UART2_SEL>,
+				 <&infracfg CLK_INFRA_UART2_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&infracfg CLK_INFRA_UART2_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_F26M_SEL>;
+			status = "disabled";
+		};
+
+		ethsys: syscon@15000000 {
+			 #address-cells = <1>;
+			 #size-cells = <1>;
+			 compatible = "mediatek,mt7986-ethsys",
+				      "syscon";
+			 reg = <0 0x15000000 0 0x1000>;
+			 #clock-cells = <1>;
+			 #reset-cells = <1>;
+		};
+
+	};
+
+};
-- 
2.29.2


^ permalink raw reply	[flat|nested] 34+ messages in thread

* Re: [RESEND,v2,8/9] arm64: dts: mediatek: add mt7986a support
  2021-09-14  8:51 ` [RESEND,v2,8/9] arm64: dts: mediatek: add mt7986a support Sam Shih
@ 2021-09-14 17:55   ` Matthias Brugger
  2021-09-24 11:20     ` [v3,8/9] " Sam Shih
  0 siblings, 1 reply; 34+ messages in thread
From: Matthias Brugger @ 2021-09-14 17:55 UTC (permalink / raw)
  To: Sam Shih, Rob Herring, Sean Wang, Linus Walleij, Matt Mackall,
	Herbert Xu, Greg Kroah-Hartman, Wim Van Sebroeck, Guenter Roeck,
	Michael Turquette, Stephen Boyd, Hsin-Yi Wang,
	Enric Balletbo i Serra, Fabien Parent, Seiya Wang, devicetree,
	linux-kernel, linux-mediatek, linux-gpio, linux-arm-kernel,
	linux-crypto, linux-serial, linux-watchdog, linux-clk
  Cc: John Crispin, Ryder Lee



On 14/09/2021 10:51, Sam Shih wrote:
> Add basic chip support for Mediatek mt7986a, include
> uart nodes with correct clocks, rng node with correct clock,
> and watchdog node and mt7986a pinctrl node.
> 
> Add cpu node, timer node, gic node, psci and reserved-memory node
> for ARM Trusted Firmware,
> 
> Add clock controller nodes, include 40M clock source, topckgen, infracfg,
> apmixedsys and ethernet subsystem.
> 
> Signed-off-by: Sam Shih <sam.shih@mediatek.com>
> 
> ---
> v2: modified clock and uart node due to clock driver updated
> ---
>   arch/arm64/boot/dts/mediatek/Makefile        |   1 +
>   arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts |  49 ++++
>   arch/arm64/boot/dts/mediatek/mt7986a.dtsi    | 227 +++++++++++++++++++
>   3 files changed, 277 insertions(+)
>   create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
>   create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a.dtsi
> 
> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> index 4f68ebed2e31..e6c3a73b9e4a 100644
> --- a/arch/arm64/boot/dts/mediatek/Makefile
> +++ b/arch/arm64/boot/dts/mediatek/Makefile
> @@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-rfb.dtb
>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt8167-pumpkin.dtb
>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb
>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb
> diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
> new file mode 100644
> index 000000000000..a58347c09ab2
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
> @@ -0,0 +1,49 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright (C) 2021 MediaTek Inc.
> + * Author: Sam.Shih <sam.shih@mediatek.com>
> + */
> +
> +/dts-v1/;
> +#include "mt7986a.dtsi"
> +
> +/ {
> +	model = "MediaTek MT7986a RFB";
> +	compatible = "mediatek,mt7986a-rfb";
> +	chosen {
> +		bootargs = "console=ttyS0,115200n1 loglevel=8  \
> +				earlycon=uart8250,mmio32,0x11002000";

We should be able to achieve this by using the stdout-path instead.

Regards,
Matthias

^ permalink raw reply	[flat|nested] 34+ messages in thread

* Re: [RESEND,v2,7/9] dt-bindings: arm64: dts: mediatek: Add mt7986 series
  2021-09-14  8:51 ` [RESEND,v2,7/9] dt-bindings: arm64: dts: mediatek: Add mt7986 series Sam Shih
@ 2021-09-14 18:00   ` Matthias Brugger
  2021-09-24 11:40     ` [v3,7/9] " Sam Shih
  0 siblings, 1 reply; 34+ messages in thread
From: Matthias Brugger @ 2021-09-14 18:00 UTC (permalink / raw)
  To: Sam Shih, Rob Herring, Sean Wang, Linus Walleij, Matt Mackall,
	Herbert Xu, Greg Kroah-Hartman, Wim Van Sebroeck, Guenter Roeck,
	Michael Turquette, Stephen Boyd, Hsin-Yi Wang,
	Enric Balletbo i Serra, Fabien Parent, Seiya Wang, devicetree,
	linux-kernel, linux-mediatek, linux-gpio, linux-arm-kernel,
	linux-crypto, linux-serial, linux-watchdog, linux-clk
  Cc: John Crispin, Ryder Lee



On 14/09/2021 10:51, Sam Shih wrote:
> MT7986 is Mediatek's new 4-core SoC, which is mainly for wifi-router
> application. The difference between mt7986a and mt7986b is that some
> pins do not exist on mt7986b.
> 
> Signed-off-by: Sam Shih <sam.shih@mediatek.com>
> Acked-by: Rob Herring <robh@kernel.org>

Sam, I'd like to take this patch through my tree but you seemed to have send the 
patches in a strange way that confuses my b4.sh

Would you mind send the next version using git send-email or similar?

Regards,
Matthias

> 
> ---
> v2: added an Acked-by tag
> ---
>   Documentation/devicetree/bindings/arm/mediatek.yaml | 8 ++++++++
>   1 file changed, 8 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml
> index 80a05f6fee85..a9a778269684 100644
> --- a/Documentation/devicetree/bindings/arm/mediatek.yaml
> +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml
> @@ -76,6 +76,14 @@ properties:
>             - enum:
>                 - mediatek,mt7629-rfb
>             - const: mediatek,mt7629
> +      - items:
> +          - enum:
> +              - mediatek,mt7986a-rfb
> +          - const: mediatek,mt7986a
> +      - items:
> +          - enum:
> +              - mediatek,mt7986b-rfb
> +          - const: mediatek,mt7986b
>         - items:
>             - enum:
>                 - mediatek,mt8127-moose
> 

^ permalink raw reply	[flat|nested] 34+ messages in thread

* Re: [v3,5/9] dt-bindings: pinctrl: update bindings for MT7986 SoC
  2021-09-14  8:51 ` [v3,5/9] dt-bindings: pinctrl: update bindings for MT7986 SoC Sam Shih
@ 2021-09-14 18:00   ` Matthias Brugger
  2021-09-24 11:44     ` [v4,5/9] " Sam Shih
  0 siblings, 1 reply; 34+ messages in thread
From: Matthias Brugger @ 2021-09-14 18:00 UTC (permalink / raw)
  To: Sam Shih, Rob Herring, Sean Wang, Linus Walleij, Matt Mackall,
	Herbert Xu, Greg Kroah-Hartman, Wim Van Sebroeck, Guenter Roeck,
	Michael Turquette, Stephen Boyd, Hsin-Yi Wang,
	Enric Balletbo i Serra, Fabien Parent, Seiya Wang, devicetree,
	linux-kernel, linux-mediatek, linux-gpio, linux-arm-kernel,
	linux-crypto, linux-serial, linux-watchdog, linux-clk
  Cc: John Crispin, Ryder Lee



On 14/09/2021 10:51, Sam Shih wrote:
> This updates bindings for MT7986 pinctrl driver. The
> difference of pinctrl between mt7986a and mt7986b is that pin-41 to pin-65
> do not exist on mt7986b
> 
> Signed-off-by: Sam Shih <sam.shih@mediatek.com>
> 
> ---
> v3 : make mt7986 pinctrl bindings as a separate file
> v2 : deleted the redundant description of mt7986a/mt7986b
> ---
>   .../pinctrl/mediatek,mt7986-pinctrl.txt       | 300 ++++++++++++++++++
>   1 file changed, 300 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.txt
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.txt

Normally new bindings should be using the yaml description instead of txt.

Regards,
Matthias

^ permalink raw reply	[flat|nested] 34+ messages in thread

* Re: [RESEND,v3,4/9] pinctrl: mediatek: moore: check if pin_desc is valid before use
  2021-09-14  8:51 ` [RESEND,v3,4/9] pinctrl: mediatek: moore: check if pin_desc is valid before use Sam Shih
@ 2021-09-16 10:07   ` Linus Walleij
  0 siblings, 0 replies; 34+ messages in thread
From: Linus Walleij @ 2021-09-16 10:07 UTC (permalink / raw)
  To: Sam Shih
  Cc: Rob Herring, Sean Wang, Matthias Brugger, Matt Mackall,
	Herbert Xu, Greg Kroah-Hartman, Wim Van Sebroeck, Guenter Roeck,
	Michael Turquette, Stephen Boyd, Hsin-Yi Wang,
	Enric Balletbo i Serra, Fabien Parent, Seiya Wang,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	linux-kernel, moderated list:ARM/Mediatek SoC support,
	open list:GPIO SUBSYSTEM, Linux ARM, Linux Crypto Mailing List,
	open list:SERIAL DRIVERS, LINUXWATCHDOG, linux-clk, John Crispin,
	Ryder Lee

On Tue, Sep 14, 2021 at 10:52 AM Sam Shih <sam.shih@mediatek.com> wrote:

> Certain SoC are missing the middle part gpios in consecutive pins,
> it's better to check if mtk_pin_desc is a valid pin for the extensibility
>
> Signed-off-by: Sam Shih <sam.shih@mediatek.com>
> Acked-by: Sean Wang <sean.wang@mediatek.com>

This patch applied for v5.16 so we get some stuff merged.

Yours,
Linus Walleij

^ permalink raw reply	[flat|nested] 34+ messages in thread

* [v3,8/9] arm64: dts: mediatek: add mt7986a support
  2021-09-14 17:55   ` Matthias Brugger
@ 2021-09-24 11:20     ` Sam Shih
  2021-09-27 12:41       ` Marc Zyngier
  0 siblings, 1 reply; 34+ messages in thread
From: Sam Shih @ 2021-09-24 11:20 UTC (permalink / raw)
  To: matthias.bgg
  Cc: Ryder.Lee, devicetree, enric.balletbo, fparent, gregkh, herbert,
	hsinyi, john, linus.walleij, linux-arm-kernel, linux-clk,
	linux-crypto, linux-gpio, linux-kernel, linux-mediatek,
	linux-serial, linux-watchdog, linux, mpm, mturquette, robh+dt,
	sam.shih, sboyd, sean.wang, seiya.wang, wim

Add basic chip support for Mediatek mt7986a, include
uart nodes with correct clocks, rng node with correct clock,
and watchdog node and mt7986a pinctrl node.

Add cpu node, timer node, gic node, psci and reserved-memory node
for ARM Trusted Firmware,

Add clock controller nodes, include 40M clock source, topckgen, infracfg,
apmixedsys and ethernet subsystem.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
---
v3: used the stdout-path instead of console=ttyS0
v2: modified clock and uart node due to clock driver updated
---
 arch/arm64/boot/dts/mediatek/Makefile        |   1 +
 arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts |  54 +++++
 arch/arm64/boot/dts/mediatek/mt7986a.dtsi    | 227 +++++++++++++++++++
 3 files changed, 282 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a.dtsi

diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 4f68ebed2e31..e6c3a73b9e4a 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-rfb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8167-pumpkin.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
new file mode 100644
index 000000000000..e210d03ba70a
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+/dts-v1/;
+#include "mt7986a.dtsi"
+
+/ {
+	model = "MediaTek MT7986a RFB";
+	compatible = "mediatek,mt7986a-rfb";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs = "earlycon=uart8250,mmio32,0x11002000 swiotlb=512";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&pio {
+	uart1_pins: uart1-pins-42-to-45 {
+		mux {
+			function = "uart";
+			groups = "uart1";
+		};
+	};
+
+	uart2_pins: uart1-pins-46-to-49 {
+		mux {
+			function = "uart";
+			groups = "uart2";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
new file mode 100644
index 000000000000..dfe3e7101031
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/mt7986-clk.h>
+
+/ {
+	compatible = "mediatek,mt7986a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clk40m: oscillator@0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <40000000>;
+		clock-output-names = "clkxtal";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			enable-method = "psci";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	psci {
+		compatible  = "arm,psci-0.2";
+		method      = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
+		secmon_reserved: secmon@43000000 {
+			reg = <0 0x43000000 0 0x30000>;
+			no-map;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		clock-frequency = <13000000>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x0c000000 0 0x40000>,
+			      <0 0x0c080000 0 0x200000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		infracfg: infracfg@10001000 {
+			compatible = "mediatek,mt7986-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		topckgen: topckgen@1001b000 {
+			compatible = "mediatek,mt7986-topckgen", "syscon";
+			reg = <0 0x1001B000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		watchdog: watchdog@1001c000 {
+			compatible = "mediatek,mt7986-wdt",
+				     "mediatek,mt6589-wdt";
+			reg = <0 0x1001c000 0 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			#reset-cells = <1>;
+			status = "disabled";
+		};
+
+		apmixedsys: apmixedsys@1001e000 {
+			compatible = "mediatek,mt7986-apmixedsys";
+			reg = <0 0x1001E000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pio: pinctrl@1001f000 {
+			compatible = "mediatek,mt7986a-pinctrl";
+			reg = <0 0x1001f000 0 0x1000>,
+			      <0 0x11c30000 0 0x1000>,
+			      <0 0x11c40000 0 0x1000>,
+			      <0 0x11e20000 0 0x1000>,
+			      <0 0x11e30000 0 0x1000>,
+			      <0 0x11f00000 0 0x1000>,
+			      <0 0x11f10000 0 0x1000>,
+			      <0 0x1000b000 0 0x1000>;
+			reg-names = "gpio_base", "iocfg_rt_base", "iocfg_rb_base",
+				    "iocfg_lt_base", "iocfg_lb_base", "iocfg_tr_base",
+				    "iocfg_tl_base", "eint";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pio 0 0 100>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+			#interrupt-cells = <2>;
+		};
+
+		sgmiisys0: syscon@10060000 {
+			compatible = "mediatek,mt7986-sgmiisys_0",
+				     "syscon";
+			reg = <0 0x10060000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		sgmiisys1: syscon@10070000 {
+			compatible = "mediatek,mt7986-sgmiisys_1",
+				     "syscon";
+			reg = <0 0x10070000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		trng: trng@1020f000 {
+			compatible = "mediatek,mt7986-rng",
+				     "mediatek,mt7623-rng";
+			reg = <0 0x1020f000 0 0x100>;
+			clocks = <&infracfg CLK_INFRA_TRNG_CK>;
+			clock-names = "rng";
+			status = "disabled";
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11002000 0 0x400>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_UART0_SEL>,
+				 <&infracfg CLK_INFRA_UART0_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&topckgen CLK_TOP_UART_SEL>,
+					  <&infracfg CLK_INFRA_UART0_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_XTAL>,
+						 <&topckgen CLK_TOP_UART_SEL>;
+			status = "disabled";
+		};
+
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11003000 0 0x400>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_UART1_SEL>,
+				 <&infracfg CLK_INFRA_UART1_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&infracfg CLK_INFRA_UART1_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_F26M_SEL>;
+			status = "disabled";
+		};
+
+		uart2: serial@11004000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11004000 0 0x400>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_UART2_SEL>,
+				 <&infracfg CLK_INFRA_UART2_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&infracfg CLK_INFRA_UART2_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_F26M_SEL>;
+			status = "disabled";
+		};
+
+		ethsys: syscon@15000000 {
+			 #address-cells = <1>;
+			 #size-cells = <1>;
+			 compatible = "mediatek,mt7986-ethsys",
+				      "syscon";
+			 reg = <0 0x15000000 0 0x1000>;
+			 #clock-cells = <1>;
+			 #reset-cells = <1>;
+		};
+
+	};
+
+};
-- 
2.29.2


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [v3,9/9] arm64: dts: mediatek: add mt7986b support
  2021-09-14  8:51 ` [RESEND,v2,9/9] arm64: dts: mediatek: add mt7986b support Sam Shih
@ 2021-09-24 11:27   ` Sam Shih
  2021-10-04  9:16     ` [v4,9/9] " Sam Shih
  0 siblings, 1 reply; 34+ messages in thread
From: Sam Shih @ 2021-09-24 11:27 UTC (permalink / raw)
  To: matthias.bgg
  Cc: Ryder.Lee, devicetree, enric.balletbo, fparent, gregkh, herbert,
	hsinyi, john, linus.walleij, linux-arm-kernel, linux-clk,
	linux-crypto, linux-gpio, linux-kernel, linux-mediatek,
	linux-serial, linux-watchdog, linux, mpm, mturquette, robh+dt,
	sam.shih, sboyd, sean.wang, seiya.wang, wim

Add basic chip support for Mediatek mt7986b, include
uart nodes with correct clocks, rng node with correct clock,
and watchdog node and mt7986b pinctrl node.

Add cpu node, timer node, gic node, psci and reserved-memory node
for ARM Trusted Firmware,

Add clock controller nodes, include 40M clock source, topckgen, infracfg,
apmixedsys and ethernet subsystem.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
---
v3: used the stdout-path instead of console=ttyS0
v2: modified clock and uart node due to clock driver updated
---
 arch/arm64/boot/dts/mediatek/Makefile        |   1 +
 arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts |  26 +++
 arch/arm64/boot/dts/mediatek/mt7986b.dtsi    | 227 +++++++++++++++++++
 3 files changed, 254 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt7986b.dtsi

diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index e6c3a73b9e4a..d555e43d1ccc 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-rfb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986b-rfb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8167-pumpkin.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
new file mode 100644
index 000000000000..95a202505bb2
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+/dts-v1/;
+#include "mt7986b.dtsi"
+
+/ {
+	model = "MediaTek MT7986b RFB";
+	compatible = "mediatek,mt7986b-rfb";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs = "earlycon=uart8250,mmio32,0x11002000 swiotlb=512";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986b.dtsi b/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
new file mode 100644
index 000000000000..1fd98fb7ba84
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/mt7986-clk.h>
+
+/ {
+	compatible = "mediatek,mt7986b";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clk40m: oscillator@0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <40000000>;
+		clock-output-names = "clkxtal";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			enable-method = "psci";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	psci {
+		compatible  = "arm,psci-0.2";
+		method      = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
+		secmon_reserved: secmon@43000000 {
+			reg = <0 0x43000000 0 0x30000>;
+			no-map;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		clock-frequency = <13000000>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x0c000000 0 0x40000>,
+			      <0 0x0c080000 0 0x200000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		infracfg: infracfg@10001000 {
+			compatible = "mediatek,mt7986-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		topckgen: topckgen@1001b000 {
+			compatible = "mediatek,mt7986-topckgen", "syscon";
+			reg = <0 0x1001B000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		watchdog: watchdog@1001c000 {
+			compatible = "mediatek,mt7986-wdt",
+				     "mediatek,mt6589-wdt";
+			reg = <0 0x1001c000 0 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			#reset-cells = <1>;
+			status = "disabled";
+		};
+
+		apmixedsys: apmixedsys@1001e000 {
+			compatible = "mediatek,mt7986-apmixedsys";
+			reg = <0 0x1001E000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pio: pinctrl@1001f000 {
+			compatible = "mediatek,mt7986b-pinctrl";
+			reg = <0 0x1001f000 0 0x1000>,
+			      <0 0x11c30000 0 0x1000>,
+			      <0 0x11c40000 0 0x1000>,
+			      <0 0x11e20000 0 0x1000>,
+			      <0 0x11e30000 0 0x1000>,
+			      <0 0x11f00000 0 0x1000>,
+			      <0 0x11f10000 0 0x1000>,
+			      <0 0x1000b000 0 0x1000>;
+			reg-names = "gpio_base", "iocfg_rt_base", "iocfg_rb_base",
+				    "iocfg_lt_base", "iocfg_lb_base", "iocfg_tr_base",
+				    "iocfg_tl_base", "eint";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pio 0 0 41>, <&pio 66 66 35>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+			#interrupt-cells = <2>;
+		};
+
+		sgmiisys0: syscon@10060000 {
+			compatible = "mediatek,mt7986-sgmiisys_0",
+				     "syscon";
+			reg = <0 0x10060000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		sgmiisys1: syscon@10070000 {
+			compatible = "mediatek,mt7986-sgmiisys_1",
+				     "syscon";
+			reg = <0 0x10070000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		trng: trng@1020f000 {
+			compatible = "mediatek,mt7986-rng",
+				     "mediatek,mt7623-rng";
+			reg = <0 0x1020f000 0 0x100>;
+			clocks = <&infracfg CLK_INFRA_TRNG_CK>;
+			clock-names = "rng";
+			status = "disabled";
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11002000 0 0x400>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_UART0_SEL>,
+				 <&infracfg CLK_INFRA_UART0_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&topckgen CLK_TOP_UART_SEL>,
+					  <&infracfg CLK_INFRA_UART0_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_XTAL>,
+						 <&topckgen CLK_TOP_UART_SEL>;
+			status = "disabled";
+		};
+
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11003000 0 0x400>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_UART1_SEL>,
+				 <&infracfg CLK_INFRA_UART1_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&infracfg CLK_INFRA_UART1_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_F26M_SEL>;
+			status = "disabled";
+		};
+
+		uart2: serial@11004000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11004000 0 0x400>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_UART2_SEL>,
+				 <&infracfg CLK_INFRA_UART2_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&infracfg CLK_INFRA_UART2_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_F26M_SEL>;
+			status = "disabled";
+		};
+
+		ethsys: syscon@15000000 {
+			 #address-cells = <1>;
+			 #size-cells = <1>;
+			 compatible = "mediatek,mt7986-ethsys",
+				      "syscon";
+			 reg = <0 0x15000000 0 0x1000>;
+			 #clock-cells = <1>;
+			 #reset-cells = <1>;
+		};
+
+	};
+
+};
-- 
2.29.2


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [v3,7/9] dt-bindings: arm64: dts: mediatek: Add mt7986 series
  2021-09-14 18:00   ` Matthias Brugger
@ 2021-09-24 11:40     ` Sam Shih
  2021-10-08 13:53       ` Matthias Brugger
  0 siblings, 1 reply; 34+ messages in thread
From: Sam Shih @ 2021-09-24 11:40 UTC (permalink / raw)
  To: matthias.bgg
  Cc: Ryder.Lee, devicetree, enric.balletbo, fparent, gregkh, herbert,
	hsinyi, john, linus.walleij, linux-arm-kernel, linux-clk,
	linux-crypto, linux-gpio, linux-kernel, linux-mediatek,
	linux-serial, linux-watchdog, linux, mpm, mturquette, robh+dt,
	sam.shih, sboyd, sean.wang, seiya.wang, wim

MT7986 series is Mediatek's new 4-core SoC, which is mainly for
wifi-router application. The difference between mt7986a and mt7986b
is that some pins do not exist on mt7986b.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>

---
v3: changed 'MT7986' to 'MT7986 series' in the commit message
v2: added an Acked-by tag
---
 Documentation/devicetree/bindings/arm/mediatek.yaml | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml
index 80a05f6fee85..a9a778269684 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek.yaml
@@ -76,6 +76,14 @@ properties:
           - enum:
               - mediatek,mt7629-rfb
           - const: mediatek,mt7629
+      - items:
+          - enum:
+              - mediatek,mt7986a-rfb
+          - const: mediatek,mt7986a
+      - items:
+          - enum:
+              - mediatek,mt7986b-rfb
+          - const: mediatek,mt7986b
       - items:
           - enum:
               - mediatek,mt8127-moose
-- 
2.29.2


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [v4,5/9] dt-bindings: pinctrl: update bindings for MT7986 SoC
  2021-09-14 18:00   ` Matthias Brugger
@ 2021-09-24 11:44     ` Sam Shih
  2021-09-24 13:59       ` Rob Herring
  0 siblings, 1 reply; 34+ messages in thread
From: Sam Shih @ 2021-09-24 11:44 UTC (permalink / raw)
  To: matthias.bgg
  Cc: Ryder.Lee, devicetree, enric.balletbo, fparent, gregkh, herbert,
	hsinyi, john, linus.walleij, linux-arm-kernel, linux-clk,
	linux-crypto, linux-gpio, linux-kernel, linux-mediatek,
	linux-serial, linux-watchdog, linux, mpm, mturquette, robh+dt,
	sam.shih, sboyd, sean.wang, seiya.wang, wim

This updates bindings for MT7986 pinctrl driver. The
difference of pinctrl between mt7986a and mt7986b is that pin-41 to pin-65
do not exist on mt7986b

Signed-off-by: Sam Shih <sam.shih@mediatek.com>

---
v4 : used yaml format instead of txt format document
v3 : make mt7986 pinctrl bindings as a separate file
v2 : deleted the redundant description of mt7986a/mt7986b
---
 .../pinctrl/mediatek,mt7986-pinctrl.yaml      | 350 ++++++++++++++++++
 1 file changed, 350 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml

diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
new file mode 100644
index 000000000000..e59aada817af
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
@@ -0,0 +1,350 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt7986-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT7986 Pin Controller Device Tree Bindings
+
+maintainers:
+  - Sean Wang <sean.wang@kernel.org>
+
+description: |+
+  The MediaTek's MT7986 Pin controller is used to control SoC pins.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt7986a-pinctrl
+      - mediatek,mt7986b-pinctrl
+
+  reg:
+    minItems: 8
+    maxItems: 8
+
+  reg-names:
+    items:
+      - const: gpio_base
+      - const: iocfg_rt_base
+      - const: iocfg_rb_base
+      - const: iocfg_lt_base
+      - const: iocfg_lb_base
+      - const: iocfg_tr_base
+      - const: iocfg_tl_base
+      - const: eint
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description: |
+      Number of cells in GPIO specifier. Since the generic GPIO
+      binding is used, the amount of cells must be specified as 2. See the below
+      mentioned gpio binding representation for description of particular cells.
+
+  interrupt-controller: true
+
+  interrupts:
+    maxItems: 1
+
+  "#interrupt-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - gpio-controller
+  - "#gpio-cells"
+
+patternProperties:
+  '-[0-9]+$':
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      'mux':
+        type: object
+        additionalProperties: false
+        description: |
+          pinmux configuration nodes.
+        $ref: "/schemas/pinctrl/pinmux-node.yaml"
+        properties:
+          function:
+            description: |
+              A string containing the name of the function to mux to the group.
+              There is no "audio", "pcie" functions on mt7986b, you can only use
+              those functions on mt7986a.
+            enum: [audio, emmc, eth, i2c, led, flash, pcie, pwm, spi, uart,
+                   watchdog, wifi]
+          groups:
+            description: |
+              An array of strings. Each string contains the name of a group.
+              There is no "pcie_pereset", "uart1", "uart2" "emmc_51", "pcm",
+              and "i2s" groups on mt7986b, you can only use those groups on
+              mt7986a.
+        required:
+          - function
+          - groups
+
+        allOf:
+          - if:
+              properties:
+                function:
+                  const: audio
+            then:
+              properties:
+                groups:
+                  enum: [pcm, i2s]
+          - if:
+              properties:
+                function:
+                  const: emmc
+            then:
+              properties:
+                groups:
+                  enum: [emmc, emmc_rst]
+          - if:
+              properties:
+                function:
+                  const: eth
+            then:
+              properties:
+                groups:
+                  enum: [switch_int, mdc_mdio]
+          - if:
+              properties:
+                function:
+                  const: i2c
+            then:
+              properties:
+                groups:
+                  enum: [i2c]
+          - if:
+              properties:
+                function:
+                  const: led
+            then:
+              properties:
+                groups:
+                  enum: [wifi_led]
+          - if:
+              properties:
+                function:
+                  const: flash
+            then:
+              properties:
+                groups:
+                  enum: [snfi]
+          - if:
+              properties:
+                function:
+                  const: pcie
+            then:
+              properties:
+                groups:
+                  enum: [pcie_clk, pcie_wake, pcie_pereset]
+          - if:
+              properties:
+                function:
+                  const: pwm
+            then:
+              properties:
+                groups:
+                  enum: [pwm0, pwm1_0, pwm1_1]
+          - if:
+              properties:
+                function:
+                  const: spi
+            then:
+              properties:
+                groups:
+                  enum: [spi0, spi0_wp_hold, spi1_0, spi1_1, spi1_2, spi1_3]
+          - if:
+              properties:
+                function:
+                  const: uart
+            then:
+              properties:
+                groups:
+                  enum: [uart1_0, uart1_1, uart1_2, uart1_3_rx_tx,
+                         uart1_3_cts_rts, uart2_0, uart2_1, uart0, uart1, uart2]
+          - if:
+              properties:
+                function:
+                  const: watchdog
+            then:
+              properties:
+                groups:
+                  enum: [watchdog]
+          - if:
+              properties:
+                function:
+                  const: wifi
+            then:
+              properties:
+                groups:
+                  enum: [wf_2g, wf_5g, wf_dbdc]
+      'conf':
+        type: object
+        additionalProperties: false
+        description: |
+          pinconf configuration nodes.
+        $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+        properties:
+          pins:
+            description: |
+              An array of strings. Each string contains the name of a pin.
+              There is no PIN 41 to PIN 65 above on mt7686b, you can only use
+              those pins on mt7986a.
+            enum: [SYS_WATCHDOG, WF2G_LED, WF5G_LED, I2C_SCL, I2C_SDA, GPIO_0,
+                   GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5, GPIO_6, GPIO_7,
+                   GPIO_8, GPIO_9, GPIO_10, GPIO_11, GPIO_12, GPIO_13, GPIO_14,
+                   GPIO_15, PWM0, PWM1, SPI0_CLK, SPI0_MOSI, SPI0_MISO, SPI0_CS,
+                   SPI0_HOLD, SPI0_WP, SPI1_CLK, SPI1_MOSI, SPI1_MISO, SPI1_CS,
+                   SPI2_CLK, SPI2_MOSI, SPI2_MISO, SPI2_CS, SPI2_HOLD, SPI2_WP,
+                   UART0_RXD, UART0_TXD, PCIE_PERESET_N, UART1_RXD, UART1_TXD,
+                   UART1_CTS, UART1_RTS, UART2_RXD, UART2_TXD, UART2_CTS,
+                   UART2_RTS, EMMC_DATA_0, EMMC_DATA_1, EMMC_DATA_2,
+                   EMMC_DATA_3, EMMC_DATA_4, EMMC_DATA_5, EMMC_DATA_6,
+                   EMMC_DATA_7, EMMC_CMD, EMMC_CK, EMMC_DSL, EMMC_RSTB, PCM_DTX,
+                   PCM_DRX, PCM_CLK, PCM_FS, MT7531_INT, SMI_MDC, SMI_MDIO,
+                   WF0_DIG_RESETB, WF0_CBA_RESETB, WF0_XO_REQ, WF0_TOP_CLK,
+                   WF0_TOP_DATA, WF0_HB1, WF0_HB2, WF0_HB3, WF0_HB4, WF0_HB0,
+                   WF0_HB0_B, WF0_HB5, WF0_HB6, WF0_HB7, WF0_HB8, WF0_HB9,
+                   WF0_HB10, WF1_DIG_RESETB, WF1_CBA_RESETB, WF1_XO_REQ,
+                   WF1_TOP_CLK, WF1_TOP_DATA, WF1_HB1, WF1_HB2, WF1_HB3,
+                   WF1_HB4, WF1_HB0, WF1_HB0_B, WF1_HB5, WF1_HB6, WF1_HB7,
+                   WF1_HB8]
+
+          bias-disable: true
+
+          bias-pull-up: true
+
+          bias-pull-down: true
+
+          input-enable: true
+
+          input-disable: true
+
+          output-enable: true
+
+          output-low: true
+
+          output-high: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+          drive-strength:
+            enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+          mediatek,pull-up-adv:
+            description: |
+              Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3'
+              Pull up setings for 2 pull resistors, R0 and R1. Valid arguments
+              are described as below:
+              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+
+          mediatek,pull-down-adv:
+            description: |
+              Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3'
+              Pull down setings for 2 pull resistors, R0 and R1. Valid arguments
+              are described as below:
+              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+
+        required:
+          - pins
+
+additionalProperties: false
+
+pin_group_table:
+  - |
+    Valid values for groups are:
+
+    There is no "pcie_pereset", "uart1", "uart2" "emmc_51", "pcm", and "i2s"
+    groups on mt7986b, you can only use those groups on mt7986a.
+
+    Valid value	      function    pins (in pin#)
+    -------------------------------------------------------------------------
+    "watchdog"        "watchdog"  0
+    "wifi_led"        "led"       1, 2
+    "i2c"             "i2c"       3, 4
+    "uart1_0"         "uart"      7, 8, 9, 10
+    "pcie_clk"        "pcie"      9
+    "pcie_wake"       "pcie"      10
+    "spi1_0"          "spi"       11, 12, 13, 14
+    "pwm1_1"          "pwm"       20,
+    "pwm0"            "pwm"       21,
+    "pwm1_0"          "pwm"       22,
+    "snfi"            "flash"     23, 24, 25, 26, 27, 28
+    "spi1_2"          "spi"       29, 30, 31, 32
+    "emmc_45"         "emmc"      22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32
+    "spi1_1"          "spi"       23, 24, 25, 26
+    "uart1_2"         "uart"      29, 30, 31, 32
+    "uart1_1"         "uart"      23, 24, 25, 26
+    "uart2_0"         "uart"      29, 30, 31, 32
+    "spi0"            "spi"       33, 34, 35, 36
+    "spi0_wp_hold"    "spi"       37, 38
+    "uart1_3_rx_tx"   "uart"      35, 36
+    "uart1_3_cts_rts" "uart"      37, 38
+    "uart2_1"         "uart"      33, 34, 35, 36
+    "spi1_3"          "spi"       33, 34, 35, 36
+    "uart0"           "uart"      39, 40
+    "pcie_pereset"    "pcie"      41
+    "uart1"           "uart"      42, 43, 44, 45
+    "uart2"           "uart"      46, 47, 48, 49
+    "emmc_51"         "emmc"      50, 51, 52, 53, 54, 55, 56, 57, 57, 59, 60, 61
+    "pcm"             "audio"     62, 63, 64, 65
+    "i2s"             "audio"     62, 63, 64, 65
+    "switch_int"      "eth"       66
+    "mdc_mdio"        "eth"       67
+
+examples:
+  - |
+    soc {
+      pio: pinctrl@1001f000 {
+        compatible = "mediatek,mt7986a-pinctrl";
+        reg = <0 0x1001f000 0 0x1000>,
+              <0 0x11c30000 0 0x1000>,
+              <0 0x11c40000 0 0x1000>,
+              <0 0x11e20000 0 0x1000>,
+              <0 0x11e30000 0 0x1000>,
+              <0 0x11f00000 0 0x1000>,
+              <0 0x11f10000 0 0x1000>,
+              <0 0x1000b000 0 0x1000>;
+        reg-names = "gpio_base", "iocfg_rt_base", "iocfg_rb_base",
+              "iocfg_lt_base", "iocfg_lb_base", "iocfg_tr_base",
+              "iocfg_tl_base", "eint";
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&pio 0 0 100>;
+        interrupt-controller;
+        interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-parent = <&gic>;
+        #interrupt-cells = <2>;
+
+        uart1_pins: uart1-pins-42-to-45 {
+          mux {
+            function = "uart";
+            groups = "uart1";
+          };
+        };
+
+        uart2_pins: uart1-pins-46-to-49 {
+          mux {
+            function = "uart";
+            groups = "uart2";
+          };
+        };
+
+      };
+    };
-- 
2.29.2


^ permalink raw reply	[flat|nested] 34+ messages in thread

* Re: [v4,5/9] dt-bindings: pinctrl: update bindings for MT7986 SoC
  2021-09-24 11:44     ` [v4,5/9] " Sam Shih
@ 2021-09-24 13:59       ` Rob Herring
  2021-09-27  2:34         ` [v5,5/9] " Sam Shih
  0 siblings, 1 reply; 34+ messages in thread
From: Rob Herring @ 2021-09-24 13:59 UTC (permalink / raw)
  To: Sam Shih
  Cc: matthias.bgg, linux-clk, Ryder.Lee, fparent, linux-crypto,
	linux-arm-kernel, seiya.wang, sean.wang, robh+dt, enric.balletbo,
	linux-gpio, devicetree, linux-kernel, gregkh, wim,
	linux-mediatek, herbert, mturquette, linux-watchdog,
	linux-serial, mpm, linux, john, sboyd, hsinyi, linus.walleij

On Fri, 24 Sep 2021 19:44:59 +0800, Sam Shih wrote:
> This updates bindings for MT7986 pinctrl driver. The
> difference of pinctrl between mt7986a and mt7986b is that pin-41 to pin-65
> do not exist on mt7986b
> 
> Signed-off-by: Sam Shih <sam.shih@mediatek.com>
> 
> ---
> v4 : used yaml format instead of txt format document
> v3 : make mt7986 pinctrl bindings as a separate file
> v2 : deleted the redundant description of mt7986a/mt7986b
> ---
>  .../pinctrl/mediatek,mt7986-pinctrl.yaml      | 350 ++++++++++++++++++
>  1 file changed, 350 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml: 'pin_group_table' is not one of ['$id', '$schema', 'title', 'description', 'examples', 'required', 'allOf', 'anyOf', 'oneOf', 'definitions', '$defs', 'additionalProperties', 'dependencies', 'patternProperties', 'properties', 'if', 'then', 'else', 'unevaluatedProperties', 'deprecated', 'maintainers', 'select']
	from schema $id: http://devicetree.org/meta-schemas/base.yaml#
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml: patternProperties:-[0-9]+$:patternProperties:conf:properties:mediatek,pull-up-adv: 'oneOf' conditional failed, one must be fixed:
	'type' is a required property
		hint: A vendor boolean property can use "type: boolean"
	/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml: patternProperties:-[0-9]+$:patternProperties:conf:properties:mediatek,pull-up-adv: 'oneOf' conditional failed, one must be fixed:
		'enum' is a required property
		'const' is a required property
		hint: A vendor string property with exact values has an implicit type
		from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml#
	/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml: patternProperties:-[0-9]+$:patternProperties:conf:properties:mediatek,pull-up-adv: 'oneOf' conditional failed, one must be fixed:
		'$ref' is a required property
		'allOf' is a required property
		hint: A vendor property needs a $ref to types.yaml
		from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml#
	hint: Vendor specific properties must have a type and description unless they have a defined, common suffix.
	from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml#
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml: patternProperties:-[0-9]+$:patternProperties:conf:properties:mediatek,pull-down-adv: 'oneOf' conditional failed, one must be fixed:
	'type' is a required property
		hint: A vendor boolean property can use "type: boolean"
	/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml: patternProperties:-[0-9]+$:patternProperties:conf:properties:mediatek,pull-down-adv: 'oneOf' conditional failed, one must be fixed:
		'enum' is a required property
		'const' is a required property
		hint: A vendor string property with exact values has an implicit type
		from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml#
	/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml: patternProperties:-[0-9]+$:patternProperties:conf:properties:mediatek,pull-down-adv: 'oneOf' conditional failed, one must be fixed:
		'$ref' is a required property
		'allOf' is a required property
		hint: A vendor property needs a $ref to types.yaml
		from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml#
	hint: Vendor specific properties must have a type and description unless they have a defined, common suffix.
	from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml#
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml: ignoring, error in schema: 
warning: no schema found in file: ./Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
Error: Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.example.dts:37.27-28 syntax error
FATAL ERROR: Unable to parse input tree
make[1]: *** [scripts/Makefile.lib:385: Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.example.dt.yaml] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:1441: dt_binding_check] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1532240

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [v5,5/9] dt-bindings: pinctrl: update bindings for MT7986 SoC
  2021-09-24 13:59       ` Rob Herring
@ 2021-09-27  2:34         ` Sam Shih
  2021-09-27 12:23           ` Rob Herring
  0 siblings, 1 reply; 34+ messages in thread
From: Sam Shih @ 2021-09-27  2:34 UTC (permalink / raw)
  To: robh
  Cc: Ryder.Lee, devicetree, enric.balletbo, fparent, gregkh, herbert,
	hsinyi, john, linus.walleij, linux-arm-kernel, linux-clk,
	linux-crypto, linux-gpio, linux-kernel, linux-mediatek,
	linux-serial, linux-watchdog, linux, matthias.bgg, mpm,
	mturquette, robh+dt, sam.shih, sboyd, sean.wang, seiya.wang, wim

This updates bindings for MT7986 pinctrl driver. The
difference of pinctrl between mt7986a and mt7986b is that pin-41 to pin-65
do not exist on mt7986b

Signed-off-by: Sam Shih <sam.shih@mediatek.com>

---
v5 : fixed yamllint warnings/errors
v4 : used yaml format instead of txt format document
v3 : make mt7986 pinctrl bindings as a separate file
v2 : deleted the redundant description of mt7986a/mt7986b
---
 .../pinctrl/mediatek,mt7986-pinctrl.yaml      | 353 ++++++++++++++++++
 1 file changed, 353 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml

diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
new file mode 100644
index 000000000000..51a13129bcb8
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
@@ -0,0 +1,353 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt7986-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT7986 Pin Controller Device Tree Bindings
+
+maintainers:
+  - Sean Wang <sean.wang@kernel.org>
+
+description: |+
+  The MediaTek's MT7986 Pin controller is used to control SoC pins.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt7986a-pinctrl
+      - mediatek,mt7986b-pinctrl
+
+  reg:
+    minItems: 8
+    maxItems: 8
+
+  reg-names:
+    items:
+      - const: gpio_base
+      - const: iocfg_rt_base
+      - const: iocfg_rb_base
+      - const: iocfg_lt_base
+      - const: iocfg_lb_base
+      - const: iocfg_tr_base
+      - const: iocfg_tl_base
+      - const: eint
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description: |
+      Number of cells in GPIO specifier. Since the generic GPIO
+      binding is used, the amount of cells must be specified as 2. See the below
+      mentioned gpio binding representation for description of particular cells.
+
+  interrupt-controller: true
+
+  interrupts:
+    maxItems: 1
+
+  "#interrupt-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - gpio-controller
+  - "#gpio-cells"
+
+patternProperties:
+  '-[0-9]+$':
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      'mux':
+        type: object
+        additionalProperties: false
+        description: |
+          pinmux configuration nodes.
+
+          Valid value	      function    pins (in pin#)
+          ---------------------------------------------------------------------
+          "watchdog"        "watchdog"  0
+          "wifi_led"        "led"       1, 2
+          "i2c"             "i2c"       3, 4
+          "uart1_0"         "uart"      7, 8, 9, 10
+          "pcie_clk"        "pcie"      9
+          "pcie_wake"       "pcie"      10
+          "spi1_0"          "spi"       11, 12, 13, 14
+          "pwm1_1"          "pwm"       20,
+          "pwm0"            "pwm"       21,
+          "pwm1_0"          "pwm"       22,
+          "snfi"            "flash"     23, 24, 25, 26, 27, 28
+          "spi1_2"          "spi"       29, 30, 31, 32
+          "emmc_45"         "emmc"      22, 23, 24, 25, 26, 27, 28, 29, 30,
+                                        31, 32
+          "spi1_1"          "spi"       23, 24, 25, 26
+          "uart1_2"         "uart"      29, 30, 31, 32
+          "uart1_1"         "uart"      23, 24, 25, 26
+          "uart2_0"         "uart"      29, 30, 31, 32
+          "spi0"            "spi"       33, 34, 35, 36
+          "spi0_wp_hold"    "spi"       37, 38
+          "uart1_3_rx_tx"   "uart"      35, 36
+          "uart1_3_cts_rts" "uart"      37, 38
+          "uart2_1"         "uart"      33, 34, 35, 36
+          "spi1_3"          "spi"       33, 34, 35, 36
+          "uart0"           "uart"      39, 40
+          "pcie_pereset"    "pcie"      41
+          "uart1"           "uart"      42, 43, 44, 45
+          "uart2"           "uart"      46, 47, 48, 49
+          "emmc_51"         "emmc"      50, 51, 52, 53, 54, 55, 56, 57, 57,
+                                        59, 60, 61
+          "pcm"             "audio"     62, 63, 64, 65
+          "i2s"             "audio"     62, 63, 64, 65
+          "switch_int"      "eth"       66
+          "mdc_mdio"        "eth"       67
+
+        $ref: "/schemas/pinctrl/pinmux-node.yaml"
+        properties:
+          function:
+            description: |
+              A string containing the name of the function to mux to the group.
+              There is no "audio", "pcie" functions on mt7986b, you can only use
+              those functions on mt7986a.
+            enum: [audio, emmc, eth, i2c, led, flash, pcie, pwm, spi, uart,
+                   watchdog, wifi]
+          groups:
+            description: |
+              An array of strings. Each string contains the name of a group.
+              There is no "pcie_pereset", "uart1", "uart2" "emmc_51", "pcm",
+              and "i2s" groups on mt7986b, you can only use those groups on
+              mt7986a.
+        required:
+          - function
+          - groups
+
+        allOf:
+          - if:
+              properties:
+                function:
+                  const: audio
+            then:
+              properties:
+                groups:
+                  enum: [pcm, i2s]
+          - if:
+              properties:
+                function:
+                  const: emmc
+            then:
+              properties:
+                groups:
+                  enum: [emmc, emmc_rst]
+          - if:
+              properties:
+                function:
+                  const: eth
+            then:
+              properties:
+                groups:
+                  enum: [switch_int, mdc_mdio]
+          - if:
+              properties:
+                function:
+                  const: i2c
+            then:
+              properties:
+                groups:
+                  enum: [i2c]
+          - if:
+              properties:
+                function:
+                  const: led
+            then:
+              properties:
+                groups:
+                  enum: [wifi_led]
+          - if:
+              properties:
+                function:
+                  const: flash
+            then:
+              properties:
+                groups:
+                  enum: [snfi]
+          - if:
+              properties:
+                function:
+                  const: pcie
+            then:
+              properties:
+                groups:
+                  enum: [pcie_clk, pcie_wake, pcie_pereset]
+          - if:
+              properties:
+                function:
+                  const: pwm
+            then:
+              properties:
+                groups:
+                  enum: [pwm0, pwm1_0, pwm1_1]
+          - if:
+              properties:
+                function:
+                  const: spi
+            then:
+              properties:
+                groups:
+                  enum: [spi0, spi0_wp_hold, spi1_0, spi1_1, spi1_2, spi1_3]
+          - if:
+              properties:
+                function:
+                  const: uart
+            then:
+              properties:
+                groups:
+                  enum: [uart1_0, uart1_1, uart1_2, uart1_3_rx_tx,
+                         uart1_3_cts_rts, uart2_0, uart2_1, uart0, uart1, uart2]
+          - if:
+              properties:
+                function:
+                  const: watchdog
+            then:
+              properties:
+                groups:
+                  enum: [watchdog]
+          - if:
+              properties:
+                function:
+                  const: wifi
+            then:
+              properties:
+                groups:
+                  enum: [wf_2g, wf_5g, wf_dbdc]
+      'conf':
+        type: object
+        additionalProperties: false
+        description: |
+          pinconf configuration nodes.
+        $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+        properties:
+          pins:
+            description: |
+              An array of strings. Each string contains the name of a pin.
+              There is no PIN 41 to PIN 65 above on mt7686b, you can only use
+              those pins on mt7986a.
+            enum: [SYS_WATCHDOG, WF2G_LED, WF5G_LED, I2C_SCL, I2C_SDA, GPIO_0,
+                   GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5, GPIO_6, GPIO_7,
+                   GPIO_8, GPIO_9, GPIO_10, GPIO_11, GPIO_12, GPIO_13, GPIO_14,
+                   GPIO_15, PWM0, PWM1, SPI0_CLK, SPI0_MOSI, SPI0_MISO, SPI0_CS,
+                   SPI0_HOLD, SPI0_WP, SPI1_CLK, SPI1_MOSI, SPI1_MISO, SPI1_CS,
+                   SPI2_CLK, SPI2_MOSI, SPI2_MISO, SPI2_CS, SPI2_HOLD, SPI2_WP,
+                   UART0_RXD, UART0_TXD, PCIE_PERESET_N, UART1_RXD, UART1_TXD,
+                   UART1_CTS, UART1_RTS, UART2_RXD, UART2_TXD, UART2_CTS,
+                   UART2_RTS, EMMC_DATA_0, EMMC_DATA_1, EMMC_DATA_2,
+                   EMMC_DATA_3, EMMC_DATA_4, EMMC_DATA_5, EMMC_DATA_6,
+                   EMMC_DATA_7, EMMC_CMD, EMMC_CK, EMMC_DSL, EMMC_RSTB, PCM_DTX,
+                   PCM_DRX, PCM_CLK, PCM_FS, MT7531_INT, SMI_MDC, SMI_MDIO,
+                   WF0_DIG_RESETB, WF0_CBA_RESETB, WF0_XO_REQ, WF0_TOP_CLK,
+                   WF0_TOP_DATA, WF0_HB1, WF0_HB2, WF0_HB3, WF0_HB4, WF0_HB0,
+                   WF0_HB0_B, WF0_HB5, WF0_HB6, WF0_HB7, WF0_HB8, WF0_HB9,
+                   WF0_HB10, WF1_DIG_RESETB, WF1_CBA_RESETB, WF1_XO_REQ,
+                   WF1_TOP_CLK, WF1_TOP_DATA, WF1_HB1, WF1_HB2, WF1_HB3,
+                   WF1_HB4, WF1_HB0, WF1_HB0_B, WF1_HB5, WF1_HB6, WF1_HB7,
+                   WF1_HB8]
+
+          bias-disable: true
+
+          bias-pull-up: true
+
+          bias-pull-down: true
+
+          input-enable: true
+
+          input-disable: true
+
+          output-enable: true
+
+          output-low: true
+
+          output-high: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+          drive-strength:
+            enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+          mediatek,pull-up-adv:
+            description: |
+              Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3'
+              Pull up setings for 2 pull resistors, R0 and R1. Valid arguments
+              are described as below:
+              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+          mediatek,pull-down-adv:
+            description: |
+              Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3'
+              Pull down setings for 2 pull resistors, R0 and R1. Valid arguments
+              are described as below:
+              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+        required:
+          - pins
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+      pio: pinctrl@1001f000 {
+        compatible = "mediatek,mt7986a-pinctrl";
+        reg = <0 0x1001f000 0 0x1000>,
+              <0 0x11c30000 0 0x1000>,
+              <0 0x11c40000 0 0x1000>,
+              <0 0x11e20000 0 0x1000>,
+              <0 0x11e30000 0 0x1000>,
+              <0 0x11f00000 0 0x1000>,
+              <0 0x11f10000 0 0x1000>,
+              <0 0x1000b000 0 0x1000>;
+        reg-names = "gpio_base", "iocfg_rt_base", "iocfg_rb_base",
+              "iocfg_lt_base", "iocfg_lb_base", "iocfg_tr_base",
+              "iocfg_tl_base", "eint";
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&pio 0 0 100>;
+        interrupt-controller;
+        interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-parent = <&gic>;
+        #interrupt-cells = <2>;
+
+        uart1_pins: uart1-pins-42-to-45 {
+          mux {
+            function = "uart";
+            groups = "uart1";
+          };
+        };
+
+        uart2_pins: uart1-pins-46-to-49 {
+          mux {
+            function = "uart";
+            groups = "uart2";
+          };
+        };
+
+      };
+    };
-- 
2.29.2


^ permalink raw reply	[flat|nested] 34+ messages in thread

* Re: [v5,5/9] dt-bindings: pinctrl: update bindings for MT7986 SoC
  2021-09-27  2:34         ` [v5,5/9] " Sam Shih
@ 2021-09-27 12:23           ` Rob Herring
  2021-10-04  9:41             ` [v6,5/9] " Sam Shih
  0 siblings, 1 reply; 34+ messages in thread
From: Rob Herring @ 2021-09-27 12:23 UTC (permalink / raw)
  To: Sam Shih
  Cc: herbert, linux-serial, linux-clk, linux, linux-gpio,
	linux-kernel, linux-arm-kernel, hsinyi, mpm, seiya.wang,
	enric.balletbo, fparent, john, sboyd, devicetree, linux-crypto,
	gregkh, mturquette, linux-watchdog, linux-mediatek, matthias.bgg,
	wim, robh+dt, linus.walleij, sean.wang, Ryder.Lee

On Mon, 27 Sep 2021 10:34:19 +0800, Sam Shih wrote:
> This updates bindings for MT7986 pinctrl driver. The
> difference of pinctrl between mt7986a and mt7986b is that pin-41 to pin-65
> do not exist on mt7986b
> 
> Signed-off-by: Sam Shih <sam.shih@mediatek.com>
> 
> ---
> v5 : fixed yamllint warnings/errors
> v4 : used yaml format instead of txt format document
> v3 : make mt7986 pinctrl bindings as a separate file
> v2 : deleted the redundant description of mt7986a/mt7986b
> ---
>  .../pinctrl/mediatek,mt7986-pinctrl.yaml      | 353 ++++++++++++++++++
>  1 file changed, 353 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.example.dts:25.13-32.43: Warning (reg_format): /example-0/soc/pinctrl@1001f000:reg: property has invalid length (128 bytes) (#address-cells == 2, #size-cells == 1)
Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.example.dt.yaml: Warning (pci_device_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.example.dt.yaml: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.example.dts:23.33-58.13: Warning (avoid_default_addr_size): /example-0/soc/pinctrl@1001f000: Relying on default #address-cells value
Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.example.dts:23.33-58.13: Warning (avoid_default_addr_size): /example-0/soc/pinctrl@1001f000: Relying on default #size-cells value
Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.example.dt.yaml: Warning (unique_unit_address): Failed prerequisite 'avoid_default_addr_size'
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.example.dt.yaml: pinctrl@1001f000: 'gpio-ranges' does not match any of the regexes: '-[0-9]+$', 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1533169

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.


^ permalink raw reply	[flat|nested] 34+ messages in thread

* Re: [v3,8/9] arm64: dts: mediatek: add mt7986a support
  2021-09-24 11:20     ` [v3,8/9] " Sam Shih
@ 2021-09-27 12:41       ` Marc Zyngier
  2021-10-04  9:12         ` [v4,8/9] " Sam Shih
  0 siblings, 1 reply; 34+ messages in thread
From: Marc Zyngier @ 2021-09-27 12:41 UTC (permalink / raw)
  To: Sam Shih
  Cc: matthias.bgg, Ryder.Lee, devicetree, enric.balletbo, fparent,
	gregkh, herbert, hsinyi, john, linus.walleij, linux-arm-kernel,
	linux-clk, linux-crypto, linux-gpio, linux-kernel,
	linux-mediatek, linux-serial, linux-watchdog, linux, mpm,
	mturquette, robh+dt, sboyd, sean.wang, seiya.wang, wim

On 2021-09-24 12:20, Sam Shih wrote:
> Add basic chip support for Mediatek mt7986a, include
> uart nodes with correct clocks, rng node with correct clock,
> and watchdog node and mt7986a pinctrl node.
> 
> Add cpu node, timer node, gic node, psci and reserved-memory node
> for ARM Trusted Firmware,
> 
> Add clock controller nodes, include 40M clock source, topckgen, 
> infracfg,
> apmixedsys and ethernet subsystem.
> 
> Signed-off-by: Sam Shih <sam.shih@mediatek.com>
> ---
> v3: used the stdout-path instead of console=ttyS0
> v2: modified clock and uart node due to clock driver updated
> ---
>  arch/arm64/boot/dts/mediatek/Makefile        |   1 +
>  arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts |  54 +++++
>  arch/arm64/boot/dts/mediatek/mt7986a.dtsi    | 227 +++++++++++++++++++
>  3 files changed, 282 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
>  create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a.dtsi

[...]

> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupt-parent = <&gic>;
> +		clock-frequency = <13000000>;

No. Please fix your firmware to program CNTFRQ_EL0 on all CPUs.
This may have been OK in 2011, but not anymore.

> +		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
> +			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
> +			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
> +			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
> +	};
> +
> +	soc {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		compatible = "simple-bus";
> +		ranges;
> +
> +		gic: interrupt-controller@c000000 {
> +			compatible = "arm,gic-v3";
> +			#interrupt-cells = <3>;
> +			interrupt-parent = <&gic>;
> +			interrupt-controller;
> +			reg = <0 0x0c000000 0 0x40000>,
> +			      <0 0x0c080000 0 0x200000>;

This looks wrong. 128kB per redistributor frames and 4 CPUs do
no result in 2MB worth of MMIO.

This is also missing the GICV/GICV/GICH regions that are exposed
by the CPUs directly.

         M.
-- 
Jazz is not dead. It just smells funny...

^ permalink raw reply	[flat|nested] 34+ messages in thread

* [v4,8/9] arm64: dts: mediatek: add mt7986a support
  2021-09-27 12:41       ` Marc Zyngier
@ 2021-10-04  9:12         ` Sam Shih
  2021-10-04 10:00           ` Marc Zyngier
  2021-10-04 10:07           ` Marc Zyngier
  0 siblings, 2 replies; 34+ messages in thread
From: Sam Shih @ 2021-10-04  9:12 UTC (permalink / raw)
  To: maz, matthias.bgg
  Cc: Ryder.Lee, devicetree, enric.balletbo, fparent, gregkh, herbert,
	hsinyi, john, linus.walleij, linux-arm-kernel, linux-clk,
	linux-crypto, linux-gpio, linux-kernel, linux-mediatek,
	linux-serial, linux-watchdog, linux, mpm, mturquette, robh+dt,
	sam.shih, sboyd, sean.wang, seiya.wang, wim

Add basic chip support for Mediatek mt7986a, include
uart nodes with correct clocks, rng node with correct clock,
and watchdog node and mt7986a pinctrl node.

Add cpu node, timer node, gic node, psci and reserved-memory node
for ARM Trusted Firmware,

Add clock controller nodes, include 40M clock source, topckgen, infracfg,
apmixedsys and ethernet subsystem.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
---
v4: added missing gic register bases, and fixed range of GICR
v3: used the stdout-path instead of console=ttyS0
v2: modified clock and uart node due to clock driver updated
---
 arch/arm64/boot/dts/mediatek/Makefile        |   1 +
 arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts |  54 +++++
 arch/arm64/boot/dts/mediatek/mt7986a.dtsi    | 230 +++++++++++++++++++
 3 files changed, 285 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a.dtsi

diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 4f68ebed2e31..e6c3a73b9e4a 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-rfb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8167-pumpkin.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
new file mode 100644
index 000000000000..e210d03ba70a
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+/dts-v1/;
+#include "mt7986a.dtsi"
+
+/ {
+	model = "MediaTek MT7986a RFB";
+	compatible = "mediatek,mt7986a-rfb";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs = "earlycon=uart8250,mmio32,0x11002000 swiotlb=512";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&pio {
+	uart1_pins: uart1-pins-42-to-45 {
+		mux {
+			function = "uart";
+			groups = "uart1";
+		};
+	};
+
+	uart2_pins: uart1-pins-46-to-49 {
+		mux {
+			function = "uart";
+			groups = "uart2";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
new file mode 100644
index 000000000000..84fd044ae673
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/mt7986-clk.h>
+
+/ {
+	compatible = "mediatek,mt7986a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clk40m: oscillator@0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <40000000>;
+		clock-output-names = "clkxtal";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			enable-method = "psci";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	psci {
+		compatible  = "arm,psci-0.2";
+		method      = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
+		secmon_reserved: secmon@43000000 {
+			reg = <0 0x43000000 0 0x30000>;
+			no-map;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		clock-frequency = <13000000>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x0c000000 0 0x40000>,  /* GICD */
+			      <0 0x0c080000 0 0x80000>,  /* GICR */
+			      <0 0x0c400000 0 0x2000>,   /* GICC */
+			      <0 0x0c410000 0 0x1000>,   /* GICH */
+			      <0 0x0c420000 0 0x2000>;   /* GICV */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		infracfg: infracfg@10001000 {
+			compatible = "mediatek,mt7986-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		topckgen: topckgen@1001b000 {
+			compatible = "mediatek,mt7986-topckgen", "syscon";
+			reg = <0 0x1001B000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		watchdog: watchdog@1001c000 {
+			compatible = "mediatek,mt7986-wdt",
+				     "mediatek,mt6589-wdt";
+			reg = <0 0x1001c000 0 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			#reset-cells = <1>;
+			status = "disabled";
+		};
+
+		apmixedsys: apmixedsys@1001e000 {
+			compatible = "mediatek,mt7986-apmixedsys";
+			reg = <0 0x1001E000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pio: pinctrl@1001f000 {
+			compatible = "mediatek,mt7986a-pinctrl";
+			reg = <0 0x1001f000 0 0x1000>,
+			      <0 0x11c30000 0 0x1000>,
+			      <0 0x11c40000 0 0x1000>,
+			      <0 0x11e20000 0 0x1000>,
+			      <0 0x11e30000 0 0x1000>,
+			      <0 0x11f00000 0 0x1000>,
+			      <0 0x11f10000 0 0x1000>,
+			      <0 0x1000b000 0 0x1000>;
+			reg-names = "gpio_base", "iocfg_rt_base", "iocfg_rb_base",
+				    "iocfg_lt_base", "iocfg_lb_base", "iocfg_tr_base",
+				    "iocfg_tl_base", "eint";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pio 0 0 100>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+			#interrupt-cells = <2>;
+		};
+
+		sgmiisys0: syscon@10060000 {
+			compatible = "mediatek,mt7986-sgmiisys_0",
+				     "syscon";
+			reg = <0 0x10060000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		sgmiisys1: syscon@10070000 {
+			compatible = "mediatek,mt7986-sgmiisys_1",
+				     "syscon";
+			reg = <0 0x10070000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		trng: trng@1020f000 {
+			compatible = "mediatek,mt7986-rng",
+				     "mediatek,mt7623-rng";
+			reg = <0 0x1020f000 0 0x100>;
+			clocks = <&infracfg CLK_INFRA_TRNG_CK>;
+			clock-names = "rng";
+			status = "disabled";
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11002000 0 0x400>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_UART0_SEL>,
+				 <&infracfg CLK_INFRA_UART0_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&topckgen CLK_TOP_UART_SEL>,
+					  <&infracfg CLK_INFRA_UART0_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_XTAL>,
+						 <&topckgen CLK_TOP_UART_SEL>;
+			status = "disabled";
+		};
+
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11003000 0 0x400>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_UART1_SEL>,
+				 <&infracfg CLK_INFRA_UART1_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&infracfg CLK_INFRA_UART1_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_F26M_SEL>;
+			status = "disabled";
+		};
+
+		uart2: serial@11004000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11004000 0 0x400>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_UART2_SEL>,
+				 <&infracfg CLK_INFRA_UART2_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&infracfg CLK_INFRA_UART2_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_F26M_SEL>;
+			status = "disabled";
+		};
+
+		ethsys: syscon@15000000 {
+			 #address-cells = <1>;
+			 #size-cells = <1>;
+			 compatible = "mediatek,mt7986-ethsys",
+				      "syscon";
+			 reg = <0 0x15000000 0 0x1000>;
+			 #clock-cells = <1>;
+			 #reset-cells = <1>;
+		};
+
+	};
+
+};
-- 
2.29.2


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [v4,9/9] arm64: dts: mediatek: add mt7986b support
  2021-09-24 11:27   ` [v3,9/9] " Sam Shih
@ 2021-10-04  9:16     ` Sam Shih
  2021-10-04 10:09       ` Marc Zyngier
  0 siblings, 1 reply; 34+ messages in thread
From: Sam Shih @ 2021-10-04  9:16 UTC (permalink / raw)
  To: matthias.bgg
  Cc: Ryder.Lee, devicetree, enric.balletbo, fparent, gregkh, herbert,
	hsinyi, john, linus.walleij, linux-arm-kernel, linux-clk,
	linux-crypto, linux-gpio, linux-kernel, linux-mediatek,
	linux-serial, linux-watchdog, linux, mpm, mturquette, robh+dt,
	sboyd, sean.wang, seiya.wang, wim, Sam Shih

Add basic chip support for Mediatek mt7986b, include
uart nodes with correct clocks, rng node with correct clock,
and watchdog node and mt7986b pinctrl node.

Add cpu node, timer node, gic node, psci and reserved-memory node
for ARM Trusted Firmware,

Add clock controller nodes, include 40M clock source, topckgen, infracfg,
apmixedsys and ethernet subsystem.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
---
v4: added missing gic register bases, and fixed range of GICR
v3: used the stdout-path instead of console=ttyS0
v2: modified clock and uart node due to clock driver updated
---
 arch/arm64/boot/dts/mediatek/Makefile        |   1 +
 arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts |  26 +++
 arch/arm64/boot/dts/mediatek/mt7986b.dtsi    | 230 +++++++++++++++++++
 3 files changed, 257 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt7986b.dtsi

diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index e6c3a73b9e4a..d555e43d1ccc 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-rfb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986b-rfb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8167-pumpkin.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
new file mode 100644
index 000000000000..95a202505bb2
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+/dts-v1/;
+#include "mt7986b.dtsi"
+
+/ {
+	model = "MediaTek MT7986b RFB";
+	compatible = "mediatek,mt7986b-rfb";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs = "earlycon=uart8250,mmio32,0x11002000 swiotlb=512";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986b.dtsi b/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
new file mode 100644
index 000000000000..06c3381a5170
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/mt7986-clk.h>
+
+/ {
+	compatible = "mediatek,mt7986b";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clk40m: oscillator@0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <40000000>;
+		clock-output-names = "clkxtal";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			enable-method = "psci";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	psci {
+		compatible  = "arm,psci-0.2";
+		method      = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
+		secmon_reserved: secmon@43000000 {
+			reg = <0 0x43000000 0 0x30000>;
+			no-map;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		clock-frequency = <13000000>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x0c000000 0 0x40000>,  /* GICD */
+			      <0 0x0c080000 0 0x80000>,  /* GICR */
+			      <0 0x0c400000 0 0x2000>,   /* GICC */
+			      <0 0x0c410000 0 0x1000>,   /* GICH */
+			      <0 0x0c420000 0 0x2000>;   /* GICV */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		infracfg: infracfg@10001000 {
+			compatible = "mediatek,mt7986-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		topckgen: topckgen@1001b000 {
+			compatible = "mediatek,mt7986-topckgen", "syscon";
+			reg = <0 0x1001B000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		watchdog: watchdog@1001c000 {
+			compatible = "mediatek,mt7986-wdt",
+				     "mediatek,mt6589-wdt";
+			reg = <0 0x1001c000 0 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			#reset-cells = <1>;
+			status = "disabled";
+		};
+
+		apmixedsys: apmixedsys@1001e000 {
+			compatible = "mediatek,mt7986-apmixedsys";
+			reg = <0 0x1001E000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pio: pinctrl@1001f000 {
+			compatible = "mediatek,mt7986b-pinctrl";
+			reg = <0 0x1001f000 0 0x1000>,
+			      <0 0x11c30000 0 0x1000>,
+			      <0 0x11c40000 0 0x1000>,
+			      <0 0x11e20000 0 0x1000>,
+			      <0 0x11e30000 0 0x1000>,
+			      <0 0x11f00000 0 0x1000>,
+			      <0 0x11f10000 0 0x1000>,
+			      <0 0x1000b000 0 0x1000>;
+			reg-names = "gpio_base", "iocfg_rt_base", "iocfg_rb_base",
+				    "iocfg_lt_base", "iocfg_lb_base", "iocfg_tr_base",
+				    "iocfg_tl_base", "eint";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pio 0 0 41>, <&pio 66 66 35>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+			#interrupt-cells = <2>;
+		};
+
+		sgmiisys0: syscon@10060000 {
+			compatible = "mediatek,mt7986-sgmiisys_0",
+				     "syscon";
+			reg = <0 0x10060000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		sgmiisys1: syscon@10070000 {
+			compatible = "mediatek,mt7986-sgmiisys_1",
+				     "syscon";
+			reg = <0 0x10070000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		trng: trng@1020f000 {
+			compatible = "mediatek,mt7986-rng",
+				     "mediatek,mt7623-rng";
+			reg = <0 0x1020f000 0 0x100>;
+			clocks = <&infracfg CLK_INFRA_TRNG_CK>;
+			clock-names = "rng";
+			status = "disabled";
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11002000 0 0x400>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_UART0_SEL>,
+				 <&infracfg CLK_INFRA_UART0_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&topckgen CLK_TOP_UART_SEL>,
+					  <&infracfg CLK_INFRA_UART0_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_XTAL>,
+						 <&topckgen CLK_TOP_UART_SEL>;
+			status = "disabled";
+		};
+
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11003000 0 0x400>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_UART1_SEL>,
+				 <&infracfg CLK_INFRA_UART1_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&infracfg CLK_INFRA_UART1_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_F26M_SEL>;
+			status = "disabled";
+		};
+
+		uart2: serial@11004000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11004000 0 0x400>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_UART2_SEL>,
+				 <&infracfg CLK_INFRA_UART2_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&infracfg CLK_INFRA_UART2_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_F26M_SEL>;
+			status = "disabled";
+		};
+
+		ethsys: syscon@15000000 {
+			 #address-cells = <1>;
+			 #size-cells = <1>;
+			 compatible = "mediatek,mt7986-ethsys",
+				      "syscon";
+			 reg = <0 0x15000000 0 0x1000>;
+			 #clock-cells = <1>;
+			 #reset-cells = <1>;
+		};
+
+	};
+
+};
-- 
2.29.2


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [v6,5/9] dt-bindings: pinctrl: update bindings for MT7986 SoC
  2021-09-27 12:23           ` Rob Herring
@ 2021-10-04  9:41             ` Sam Shih
  2021-10-12  1:26               ` Rob Herring
  0 siblings, 1 reply; 34+ messages in thread
From: Sam Shih @ 2021-10-04  9:41 UTC (permalink / raw)
  To: robh
  Cc: Ryder.Lee, devicetree, enric.balletbo, fparent, gregkh, herbert,
	hsinyi, john, linus.walleij, linux-arm-kernel, linux-clk,
	linux-crypto, linux-gpio, linux-kernel, linux-mediatek,
	linux-serial, linux-watchdog, linux, matthias.bgg, mpm,
	mturquette, robh+dt, sam.shih, sboyd, sean.wang, seiya.wang, wim

This updates bindings for MT7986 pinctrl driver. The
difference of pinctrl between mt7986a and mt7986b is that pin-41 to pin-65
do not exist on mt7986b

Signed-off-by: Sam Shih <sam.shih@mediatek.com>

---
v6 : fixed yamllint warnings/errors v2
v5 : fixed yamllint warnings/errors v1
v4 : used yaml format instead of txt format document
v3 : make mt7986 pinctrl bindings as a separate file
v2 : deleted the redundant description of mt7986a/mt7986b
---
 .../pinctrl/mediatek,mt7986-pinctrl.yaml      | 361 ++++++++++++++++++
 1 file changed, 361 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml

diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
new file mode 100644
index 000000000000..cde842d093dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
@@ -0,0 +1,361 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt7986-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT7986 Pin Controller Device Tree Bindings
+
+maintainers:
+  - Sean Wang <sean.wang@kernel.org>
+
+description: |+
+  The MediaTek's MT7986 Pin controller is used to control SoC pins.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt7986a-pinctrl
+      - mediatek,mt7986b-pinctrl
+
+  reg:
+    minItems: 8
+    maxItems: 8
+
+  reg-names:
+    items:
+      - const: gpio_base
+      - const: iocfg_rt_base
+      - const: iocfg_rb_base
+      - const: iocfg_lt_base
+      - const: iocfg_lb_base
+      - const: iocfg_tr_base
+      - const: iocfg_tl_base
+      - const: eint
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description: |
+      Number of cells in GPIO specifier. Since the generic GPIO
+      binding is used, the amount of cells must be specified as 2. See the below
+      mentioned gpio binding representation for description of particular cells.
+
+  gpio-ranges:
+    minItems: 1
+    maxItems: 5
+    description: |
+      GPIO valid number range.
+
+  interrupt-controller: true
+
+  interrupts:
+    maxItems: 1
+
+  "#interrupt-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - gpio-controller
+  - "#gpio-cells"
+
+patternProperties:
+  '-[0-9]+$':
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      'mux':
+        type: object
+        additionalProperties: false
+        description: |
+          pinmux configuration nodes.
+
+          Valid value	      function    pins (in pin#)
+          ---------------------------------------------------------------------
+          "watchdog"        "watchdog"  0
+          "wifi_led"        "led"       1, 2
+          "i2c"             "i2c"       3, 4
+          "uart1_0"         "uart"      7, 8, 9, 10
+          "pcie_clk"        "pcie"      9
+          "pcie_wake"       "pcie"      10
+          "spi1_0"          "spi"       11, 12, 13, 14
+          "pwm1_1"          "pwm"       20,
+          "pwm0"            "pwm"       21,
+          "pwm1_0"          "pwm"       22,
+          "snfi"            "flash"     23, 24, 25, 26, 27, 28
+          "spi1_2"          "spi"       29, 30, 31, 32
+          "emmc_45"         "emmc"      22, 23, 24, 25, 26, 27, 28, 29, 30,
+                                        31, 32
+          "spi1_1"          "spi"       23, 24, 25, 26
+          "uart1_2"         "uart"      29, 30, 31, 32
+          "uart1_1"         "uart"      23, 24, 25, 26
+          "uart2_0"         "uart"      29, 30, 31, 32
+          "spi0"            "spi"       33, 34, 35, 36
+          "spi0_wp_hold"    "spi"       37, 38
+          "uart1_3_rx_tx"   "uart"      35, 36
+          "uart1_3_cts_rts" "uart"      37, 38
+          "uart2_1"         "uart"      33, 34, 35, 36
+          "spi1_3"          "spi"       33, 34, 35, 36
+          "uart0"           "uart"      39, 40
+          "pcie_pereset"    "pcie"      41
+          "uart1"           "uart"      42, 43, 44, 45
+          "uart2"           "uart"      46, 47, 48, 49
+          "emmc_51"         "emmc"      50, 51, 52, 53, 54, 55, 56, 57, 57,
+                                        59, 60, 61
+          "pcm"             "audio"     62, 63, 64, 65
+          "i2s"             "audio"     62, 63, 64, 65
+          "switch_int"      "eth"       66
+          "mdc_mdio"        "eth"       67
+
+        $ref: "/schemas/pinctrl/pinmux-node.yaml"
+        properties:
+          function:
+            description: |
+              A string containing the name of the function to mux to the group.
+              There is no "audio", "pcie" functions on mt7986b, you can only use
+              those functions on mt7986a.
+            enum: [audio, emmc, eth, i2c, led, flash, pcie, pwm, spi, uart,
+                   watchdog, wifi]
+          groups:
+            description: |
+              An array of strings. Each string contains the name of a group.
+              There is no "pcie_pereset", "uart1", "uart2" "emmc_51", "pcm",
+              and "i2s" groups on mt7986b, you can only use those groups on
+              mt7986a.
+        required:
+          - function
+          - groups
+
+        allOf:
+          - if:
+              properties:
+                function:
+                  const: audio
+            then:
+              properties:
+                groups:
+                  enum: [pcm, i2s]
+          - if:
+              properties:
+                function:
+                  const: emmc
+            then:
+              properties:
+                groups:
+                  enum: [emmc, emmc_rst]
+          - if:
+              properties:
+                function:
+                  const: eth
+            then:
+              properties:
+                groups:
+                  enum: [switch_int, mdc_mdio]
+          - if:
+              properties:
+                function:
+                  const: i2c
+            then:
+              properties:
+                groups:
+                  enum: [i2c]
+          - if:
+              properties:
+                function:
+                  const: led
+            then:
+              properties:
+                groups:
+                  enum: [wifi_led]
+          - if:
+              properties:
+                function:
+                  const: flash
+            then:
+              properties:
+                groups:
+                  enum: [snfi]
+          - if:
+              properties:
+                function:
+                  const: pcie
+            then:
+              properties:
+                groups:
+                  enum: [pcie_clk, pcie_wake, pcie_pereset]
+          - if:
+              properties:
+                function:
+                  const: pwm
+            then:
+              properties:
+                groups:
+                  enum: [pwm0, pwm1_0, pwm1_1]
+          - if:
+              properties:
+                function:
+                  const: spi
+            then:
+              properties:
+                groups:
+                  enum: [spi0, spi0_wp_hold, spi1_0, spi1_1, spi1_2, spi1_3]
+          - if:
+              properties:
+                function:
+                  const: uart
+            then:
+              properties:
+                groups:
+                  enum: [uart1_0, uart1_1, uart1_2, uart1_3_rx_tx,
+                         uart1_3_cts_rts, uart2_0, uart2_1, uart0, uart1, uart2]
+          - if:
+              properties:
+                function:
+                  const: watchdog
+            then:
+              properties:
+                groups:
+                  enum: [watchdog]
+          - if:
+              properties:
+                function:
+                  const: wifi
+            then:
+              properties:
+                groups:
+                  enum: [wf_2g, wf_5g, wf_dbdc]
+      'conf':
+        type: object
+        additionalProperties: false
+        description: |
+          pinconf configuration nodes.
+        $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+        properties:
+          pins:
+            description: |
+              An array of strings. Each string contains the name of a pin.
+              There is no PIN 41 to PIN 65 above on mt7686b, you can only use
+              those pins on mt7986a.
+            enum: [SYS_WATCHDOG, WF2G_LED, WF5G_LED, I2C_SCL, I2C_SDA, GPIO_0,
+                   GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5, GPIO_6, GPIO_7,
+                   GPIO_8, GPIO_9, GPIO_10, GPIO_11, GPIO_12, GPIO_13, GPIO_14,
+                   GPIO_15, PWM0, PWM1, SPI0_CLK, SPI0_MOSI, SPI0_MISO, SPI0_CS,
+                   SPI0_HOLD, SPI0_WP, SPI1_CLK, SPI1_MOSI, SPI1_MISO, SPI1_CS,
+                   SPI2_CLK, SPI2_MOSI, SPI2_MISO, SPI2_CS, SPI2_HOLD, SPI2_WP,
+                   UART0_RXD, UART0_TXD, PCIE_PERESET_N, UART1_RXD, UART1_TXD,
+                   UART1_CTS, UART1_RTS, UART2_RXD, UART2_TXD, UART2_CTS,
+                   UART2_RTS, EMMC_DATA_0, EMMC_DATA_1, EMMC_DATA_2,
+                   EMMC_DATA_3, EMMC_DATA_4, EMMC_DATA_5, EMMC_DATA_6,
+                   EMMC_DATA_7, EMMC_CMD, EMMC_CK, EMMC_DSL, EMMC_RSTB, PCM_DTX,
+                   PCM_DRX, PCM_CLK, PCM_FS, MT7531_INT, SMI_MDC, SMI_MDIO,
+                   WF0_DIG_RESETB, WF0_CBA_RESETB, WF0_XO_REQ, WF0_TOP_CLK,
+                   WF0_TOP_DATA, WF0_HB1, WF0_HB2, WF0_HB3, WF0_HB4, WF0_HB0,
+                   WF0_HB0_B, WF0_HB5, WF0_HB6, WF0_HB7, WF0_HB8, WF0_HB9,
+                   WF0_HB10, WF1_DIG_RESETB, WF1_CBA_RESETB, WF1_XO_REQ,
+                   WF1_TOP_CLK, WF1_TOP_DATA, WF1_HB1, WF1_HB2, WF1_HB3,
+                   WF1_HB4, WF1_HB0, WF1_HB0_B, WF1_HB5, WF1_HB6, WF1_HB7,
+                   WF1_HB8]
+
+          bias-disable: true
+
+          bias-pull-up: true
+
+          bias-pull-down: true
+
+          input-enable: true
+
+          input-disable: true
+
+          output-enable: true
+
+          output-low: true
+
+          output-high: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+          drive-strength:
+            enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+          mediatek,pull-up-adv:
+            description: |
+              Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3'
+              Pull up setings for 2 pull resistors, R0 and R1. Valid arguments
+              are described as below:
+              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+          mediatek,pull-down-adv:
+            description: |
+              Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3'
+              Pull down setings for 2 pull resistors, R0 and R1. Valid arguments
+              are described as below:
+              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+        required:
+          - pins
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      pio: pinctrl@1001f000 {
+        compatible = "mediatek,mt7986a-pinctrl";
+        reg = <0 0x1001f000 0 0x1000>,
+              <0 0x11c30000 0 0x1000>,
+              <0 0x11c40000 0 0x1000>,
+              <0 0x11e20000 0 0x1000>,
+              <0 0x11e30000 0 0x1000>,
+              <0 0x11f00000 0 0x1000>,
+              <0 0x11f10000 0 0x1000>,
+              <0 0x1000b000 0 0x1000>;
+        reg-names = "gpio_base", "iocfg_rt_base", "iocfg_rb_base",
+              "iocfg_lt_base", "iocfg_lb_base", "iocfg_tr_base",
+              "iocfg_tl_base", "eint";
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&pio 0 0 100>;
+        interrupt-controller;
+        interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-parent = <&gic>;
+        #interrupt-cells = <2>;
+
+        uart1_pins: uart1-pins-42-to-45 {
+          mux {
+            function = "uart";
+            groups = "uart1";
+          };
+        };
+
+        uart2_pins: uart1-pins-46-to-49 {
+          mux {
+            function = "uart";
+            groups = "uart2";
+          };
+        };
+
+      };
+    };
-- 
2.29.2


^ permalink raw reply	[flat|nested] 34+ messages in thread

* Re: [v4,8/9] arm64: dts: mediatek: add mt7986a support
  2021-10-04  9:12         ` [v4,8/9] " Sam Shih
@ 2021-10-04 10:00           ` Marc Zyngier
  2021-10-04 10:07           ` Marc Zyngier
  1 sibling, 0 replies; 34+ messages in thread
From: Marc Zyngier @ 2021-10-04 10:00 UTC (permalink / raw)
  To: Sam Shih
  Cc: matthias.bgg, Ryder.Lee, devicetree, enric.balletbo, fparent,
	gregkh, herbert, hsinyi, john, linus.walleij, linux-arm-kernel,
	linux-clk, linux-crypto, linux-gpio, linux-kernel,
	linux-mediatek, linux-serial, linux-watchdog, linux, mpm,
	mturquette, robh+dt, sboyd, sean.wang, seiya.wang, wim

On Mon, 04 Oct 2021 10:12:08 +0100,
Sam Shih <sam.shih@mediatek.com> wrote:
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupt-parent = <&gic>;
> +		clock-frequency = <13000000>;

I mentioned it last time[1] , but you seem to have ignored my comment.
This property isn't an acceptable workaround on new systems. Please
fix your firmware and drop this clock-frequency property.

	M.

[1] https://lore.kernel.org/r/0459da08cddc579f069a28e659e614fd@kernel.org

-- 
Without deviation from the norm, progress is not possible.

^ permalink raw reply	[flat|nested] 34+ messages in thread

* Re: [v4,8/9] arm64: dts: mediatek: add mt7986a support
  2021-10-04  9:12         ` [v4,8/9] " Sam Shih
  2021-10-04 10:00           ` Marc Zyngier
@ 2021-10-04 10:07           ` Marc Zyngier
  2021-10-04 12:41             ` [v5,8/9] " Sam Shih
  1 sibling, 1 reply; 34+ messages in thread
From: Marc Zyngier @ 2021-10-04 10:07 UTC (permalink / raw)
  To: Sam Shih
  Cc: matthias.bgg, Ryder.Lee, devicetree, enric.balletbo, fparent,
	gregkh, herbert, hsinyi, john, linus.walleij, linux-arm-kernel,
	linux-clk, linux-crypto, linux-gpio, linux-kernel,
	linux-mediatek, linux-serial, linux-watchdog, linux, mpm,
	mturquette, robh+dt, sboyd, sean.wang, seiya.wang, wim

On Mon, 04 Oct 2021 10:12:08 +0100,
Sam Shih <sam.shih@mediatek.com> wrote:
> 
> +		gic: interrupt-controller@c000000 {
> +			compatible = "arm,gic-v3";
> +			#interrupt-cells = <3>;
> +			interrupt-parent = <&gic>;
> +			interrupt-controller;
> +			reg = <0 0x0c000000 0 0x40000>,  /* GICD */
> +			      <0 0x0c080000 0 0x80000>,  /* GICR */
> +			      <0 0x0c400000 0 0x2000>,   /* GICC */
> +			      <0 0x0c410000 0 0x1000>,   /* GICH */
> +			      <0 0x0c420000 0 0x2000>;   /* GICV */
> +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +		};

Also, the GICD region is totally wrong. It is 64kB at all times. I
don't know where you get this 256kB figure from.

	M.

-- 
Without deviation from the norm, progress is not possible.

^ permalink raw reply	[flat|nested] 34+ messages in thread

* Re: [v4,9/9] arm64: dts: mediatek: add mt7986b support
  2021-10-04  9:16     ` [v4,9/9] " Sam Shih
@ 2021-10-04 10:09       ` Marc Zyngier
  2021-10-04 12:42         ` [v5,9/9] " Sam Shih
  0 siblings, 1 reply; 34+ messages in thread
From: Marc Zyngier @ 2021-10-04 10:09 UTC (permalink / raw)
  To: Sam Shih
  Cc: matthias.bgg, Ryder.Lee, devicetree, enric.balletbo, fparent,
	gregkh, herbert, hsinyi, john, linus.walleij, linux-arm-kernel,
	linux-clk, linux-crypto, linux-gpio, linux-kernel,
	linux-mediatek, linux-serial, linux-watchdog, linux, mpm,
	mturquette, robh+dt, sboyd, sean.wang, seiya.wang, wim

On 2021-10-04 10:16, Sam Shih wrote:
> Add basic chip support for Mediatek mt7986b, include
> uart nodes with correct clocks, rng node with correct clock,
> and watchdog node and mt7986b pinctrl node.
> 
> Add cpu node, timer node, gic node, psci and reserved-memory node
> for ARM Trusted Firmware,
> 
> Add clock controller nodes, include 40M clock source, topckgen, 
> infracfg,
> apmixedsys and ethernet subsystem.
> 
> Signed-off-by: Sam Shih <sam.shih@mediatek.com>
> ---
> v4: added missing gic register bases, and fixed range of GICR
> v3: used the stdout-path instead of console=ttyS0
> v2: modified clock and uart node due to clock driver updated
> ---
>  arch/arm64/boot/dts/mediatek/Makefile        |   1 +
>  arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts |  26 +++
>  arch/arm64/boot/dts/mediatek/mt7986b.dtsi    | 230 +++++++++++++++++++
>  3 files changed, 257 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
>  create mode 100644 arch/arm64/boot/dts/mediatek/mt7986b.dtsi
> 
> diff --git a/arch/arm64/boot/dts/mediatek/Makefile
> b/arch/arm64/boot/dts/mediatek/Makefile
> index e6c3a73b9e4a..d555e43d1ccc 100644
> --- a/arch/arm64/boot/dts/mediatek/Makefile
> +++ b/arch/arm64/boot/dts/mediatek/Makefile
> @@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-rfb.dtb
> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986b-rfb.dtb
>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt8167-pumpkin.dtb
>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb
>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb
> diff --git a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
> b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
> new file mode 100644
> index 000000000000..95a202505bb2
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
> @@ -0,0 +1,26 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright (C) 2021 MediaTek Inc.
> + * Author: Sam.Shih <sam.shih@mediatek.com>
> + */
> +
> +/dts-v1/;
> +#include "mt7986b.dtsi"
> +
> +/ {
> +	model = "MediaTek MT7986b RFB";
> +	compatible = "mediatek,mt7986b-rfb";
> +
> +	aliases {
> +		serial0 = &uart0;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +		bootargs = "earlycon=uart8250,mmio32,0x11002000 swiotlb=512";
> +	};
> +};
> +
> +&uart0 {
> +	status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
> b/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
> new file mode 100644
> index 000000000000..06c3381a5170
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
> @@ -0,0 +1,230 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright (C) 2021 MediaTek Inc.
> + * Author: Sam.Shih <sam.shih@mediatek.com>
> + */
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/mt7986-clk.h>
> +
> +/ {
> +	compatible = "mediatek,mt7986b";
> +	interrupt-parent = <&gic>;
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	clk40m: oscillator@0 {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <40000000>;
> +		clock-output-names = "clkxtal";
> +	};
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		cpu0: cpu@0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			enable-method = "psci";
> +			reg = <0x0>;
> +			#cooling-cells = <2>;
> +		};
> +
> +		cpu1: cpu@1 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			enable-method = "psci";
> +			reg = <0x1>;
> +			#cooling-cells = <2>;
> +		};
> +
> +		cpu2: cpu@2 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			enable-method = "psci";
> +			reg = <0x2>;
> +			#cooling-cells = <2>;
> +		};
> +
> +		cpu3: cpu@3 {
> +			device_type = "cpu";
> +			enable-method = "psci";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x3>;
> +			#cooling-cells = <2>;
> +		};
> +	};
> +
> +	psci {
> +		compatible  = "arm,psci-0.2";
> +		method      = "smc";
> +	};
> +
> +	reserved-memory {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +		/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
> +		secmon_reserved: secmon@43000000 {
> +			reg = <0 0x43000000 0 0x30000>;
> +			no-map;
> +		};
> +	};
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupt-parent = <&gic>;
> +		clock-frequency = <13000000>;

As previously mentioned, please fix your firmware and drop this.

> +		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
> +			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
> +			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
> +			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
> +	};
> +
> +	soc {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		compatible = "simple-bus";
> +		ranges;
> +
> +		gic: interrupt-controller@c000000 {
> +			compatible = "arm,gic-v3";
> +			#interrupt-cells = <3>;
> +			interrupt-parent = <&gic>;
> +			interrupt-controller;
> +			reg = <0 0x0c000000 0 0x40000>,  /* GICD */

This is not a valid value for GICD.

Thanks,

         M.

^ permalink raw reply	[flat|nested] 34+ messages in thread

* [v5,8/9] arm64: dts: mediatek: add mt7986a support
  2021-10-04 10:07           ` Marc Zyngier
@ 2021-10-04 12:41             ` Sam Shih
  0 siblings, 0 replies; 34+ messages in thread
From: Sam Shih @ 2021-10-04 12:41 UTC (permalink / raw)
  To: maz, matthias.bgg
  Cc: Ryder.Lee, devicetree, enric.balletbo, fparent, gregkh, herbert,
	hsinyi, john, linus.walleij, linux-arm-kernel, linux-clk,
	linux-crypto, linux-gpio, linux-kernel, linux-mediatek,
	linux-serial, linux-watchdog, linux, mpm, mturquette, robh+dt,
	sam.shih, sboyd, sean.wang, seiya.wang, wim

Add basic chip support for Mediatek mt7986a, include
uart nodes with correct clocks, rng node with correct clock,
and watchdog node and mt7986a pinctrl node.

Add cpu node, timer node, gic node, psci and reserved-memory node
for ARM Trusted Firmware,

Add clock controller nodes, include 40M clock source, topckgen, infracfg,
apmixedsys and ethernet subsystem.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
---
v5: follow reviewr's comment: removed clock freqency node in timer due to
    we have set CNTFRQ_EL0 in ATF firmware, and also corrected GICD range
v4: added missing gic register bases, and fixed range of GICR
v3: used the stdout-path instead of console=ttyS0
v2: modified clock and uart node due to clock driver updated
---
 arch/arm64/boot/dts/mediatek/Makefile        |   1 +
 arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts |  54 +++++
 arch/arm64/boot/dts/mediatek/mt7986a.dtsi    | 229 +++++++++++++++++++
 3 files changed, 284 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a.dtsi

diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 4f68ebed2e31..e6c3a73b9e4a 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-rfb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8167-pumpkin.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
new file mode 100644
index 000000000000..e210d03ba70a
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+/dts-v1/;
+#include "mt7986a.dtsi"
+
+/ {
+	model = "MediaTek MT7986a RFB";
+	compatible = "mediatek,mt7986a-rfb";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs = "earlycon=uart8250,mmio32,0x11002000 swiotlb=512";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&pio {
+	uart1_pins: uart1-pins-42-to-45 {
+		mux {
+			function = "uart";
+			groups = "uart1";
+		};
+	};
+
+	uart2_pins: uart1-pins-46-to-49 {
+		mux {
+			function = "uart";
+			groups = "uart2";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
new file mode 100644
index 000000000000..d126fb7218c6
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
@@ -0,0 +1,229 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/mt7986-clk.h>
+
+/ {
+	compatible = "mediatek,mt7986a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clk40m: oscillator@0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <40000000>;
+		clock-output-names = "clkxtal";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			enable-method = "psci";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	psci {
+		compatible  = "arm,psci-0.2";
+		method      = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
+		secmon_reserved: secmon@43000000 {
+			reg = <0 0x43000000 0 0x30000>;
+			no-map;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x0c000000 0 0x10000>,  /* GICD */
+			      <0 0x0c080000 0 0x80000>,  /* GICR */
+			      <0 0x0c400000 0 0x2000>,   /* GICC */
+			      <0 0x0c410000 0 0x1000>,   /* GICH */
+			      <0 0x0c420000 0 0x2000>;   /* GICV */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		infracfg: infracfg@10001000 {
+			compatible = "mediatek,mt7986-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		topckgen: topckgen@1001b000 {
+			compatible = "mediatek,mt7986-topckgen", "syscon";
+			reg = <0 0x1001B000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		watchdog: watchdog@1001c000 {
+			compatible = "mediatek,mt7986-wdt",
+				     "mediatek,mt6589-wdt";
+			reg = <0 0x1001c000 0 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			#reset-cells = <1>;
+			status = "disabled";
+		};
+
+		apmixedsys: apmixedsys@1001e000 {
+			compatible = "mediatek,mt7986-apmixedsys";
+			reg = <0 0x1001E000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pio: pinctrl@1001f000 {
+			compatible = "mediatek,mt7986a-pinctrl";
+			reg = <0 0x1001f000 0 0x1000>,
+			      <0 0x11c30000 0 0x1000>,
+			      <0 0x11c40000 0 0x1000>,
+			      <0 0x11e20000 0 0x1000>,
+			      <0 0x11e30000 0 0x1000>,
+			      <0 0x11f00000 0 0x1000>,
+			      <0 0x11f10000 0 0x1000>,
+			      <0 0x1000b000 0 0x1000>;
+			reg-names = "gpio_base", "iocfg_rt_base", "iocfg_rb_base",
+				    "iocfg_lt_base", "iocfg_lb_base", "iocfg_tr_base",
+				    "iocfg_tl_base", "eint";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pio 0 0 100>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+			#interrupt-cells = <2>;
+		};
+
+		sgmiisys0: syscon@10060000 {
+			compatible = "mediatek,mt7986-sgmiisys_0",
+				     "syscon";
+			reg = <0 0x10060000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		sgmiisys1: syscon@10070000 {
+			compatible = "mediatek,mt7986-sgmiisys_1",
+				     "syscon";
+			reg = <0 0x10070000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		trng: trng@1020f000 {
+			compatible = "mediatek,mt7986-rng",
+				     "mediatek,mt7623-rng";
+			reg = <0 0x1020f000 0 0x100>;
+			clocks = <&infracfg CLK_INFRA_TRNG_CK>;
+			clock-names = "rng";
+			status = "disabled";
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11002000 0 0x400>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_UART0_SEL>,
+				 <&infracfg CLK_INFRA_UART0_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&topckgen CLK_TOP_UART_SEL>,
+					  <&infracfg CLK_INFRA_UART0_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_XTAL>,
+						 <&topckgen CLK_TOP_UART_SEL>;
+			status = "disabled";
+		};
+
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11003000 0 0x400>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_UART1_SEL>,
+				 <&infracfg CLK_INFRA_UART1_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&infracfg CLK_INFRA_UART1_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_F26M_SEL>;
+			status = "disabled";
+		};
+
+		uart2: serial@11004000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11004000 0 0x400>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_UART2_SEL>,
+				 <&infracfg CLK_INFRA_UART2_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&infracfg CLK_INFRA_UART2_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_F26M_SEL>;
+			status = "disabled";
+		};
+
+		ethsys: syscon@15000000 {
+			 #address-cells = <1>;
+			 #size-cells = <1>;
+			 compatible = "mediatek,mt7986-ethsys",
+				      "syscon";
+			 reg = <0 0x15000000 0 0x1000>;
+			 #clock-cells = <1>;
+			 #reset-cells = <1>;
+		};
+
+	};
+
+};
-- 
2.29.2


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [v5,9/9] arm64: dts: mediatek: add mt7986b support
  2021-10-04 10:09       ` Marc Zyngier
@ 2021-10-04 12:42         ` Sam Shih
  0 siblings, 0 replies; 34+ messages in thread
From: Sam Shih @ 2021-10-04 12:42 UTC (permalink / raw)
  To: maz, matthias.bgg
  Cc: Ryder.Lee, devicetree, enric.balletbo, fparent, gregkh, herbert,
	hsinyi, john, linus.walleij, linux-arm-kernel, linux-clk,
	linux-crypto, linux-gpio, linux-kernel, linux-mediatek,
	linux-serial, linux-watchdog, linux, mpm, mturquette, robh+dt,
	sam.shih, sboyd, sean.wang, seiya.wang, wim

Add basic chip support for Mediatek mt7986b, include
uart nodes with correct clocks, rng node with correct clock,
and watchdog node and mt7986b pinctrl node.

Add cpu node, timer node, gic node, psci and reserved-memory node
for ARM Trusted Firmware,

Add clock controller nodes, include 40M clock source, topckgen, infracfg,
apmixedsys and ethernet subsystem.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
---
v5: follow reviewr's comment: removed clock freqency node in timer due to
    we have set CNTFRQ_EL0 in ATF firmware, and also corrected GICD range
v4: added missing gic register bases, and fixed range of GICR
v3: used the stdout-path instead of console=ttyS0
v2: modified clock and uart node due to clock driver updated
---
 arch/arm64/boot/dts/mediatek/Makefile        |   1 +
 arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts |  26 +++
 arch/arm64/boot/dts/mediatek/mt7986b.dtsi    | 229 +++++++++++++++++++
 3 files changed, 256 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt7986b.dtsi

diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index e6c3a73b9e4a..d555e43d1ccc 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-rfb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986b-rfb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8167-pumpkin.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
new file mode 100644
index 000000000000..95a202505bb2
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+/dts-v1/;
+#include "mt7986b.dtsi"
+
+/ {
+	model = "MediaTek MT7986b RFB";
+	compatible = "mediatek,mt7986b-rfb";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs = "earlycon=uart8250,mmio32,0x11002000 swiotlb=512";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986b.dtsi b/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
new file mode 100644
index 000000000000..318547dde733
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
@@ -0,0 +1,229 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/mt7986-clk.h>
+
+/ {
+	compatible = "mediatek,mt7986b";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clk40m: oscillator@0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <40000000>;
+		clock-output-names = "clkxtal";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			enable-method = "psci";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	psci {
+		compatible  = "arm,psci-0.2";
+		method      = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
+		secmon_reserved: secmon@43000000 {
+			reg = <0 0x43000000 0 0x30000>;
+			no-map;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x0c000000 0 0x10000>,  /* GICD */
+			      <0 0x0c080000 0 0x80000>,  /* GICR */
+			      <0 0x0c400000 0 0x2000>,   /* GICC */
+			      <0 0x0c410000 0 0x1000>,   /* GICH */
+			      <0 0x0c420000 0 0x2000>;   /* GICV */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		infracfg: infracfg@10001000 {
+			compatible = "mediatek,mt7986-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		topckgen: topckgen@1001b000 {
+			compatible = "mediatek,mt7986-topckgen", "syscon";
+			reg = <0 0x1001B000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		watchdog: watchdog@1001c000 {
+			compatible = "mediatek,mt7986-wdt",
+				     "mediatek,mt6589-wdt";
+			reg = <0 0x1001c000 0 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			#reset-cells = <1>;
+			status = "disabled";
+		};
+
+		apmixedsys: apmixedsys@1001e000 {
+			compatible = "mediatek,mt7986-apmixedsys";
+			reg = <0 0x1001E000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pio: pinctrl@1001f000 {
+			compatible = "mediatek,mt7986b-pinctrl";
+			reg = <0 0x1001f000 0 0x1000>,
+			      <0 0x11c30000 0 0x1000>,
+			      <0 0x11c40000 0 0x1000>,
+			      <0 0x11e20000 0 0x1000>,
+			      <0 0x11e30000 0 0x1000>,
+			      <0 0x11f00000 0 0x1000>,
+			      <0 0x11f10000 0 0x1000>,
+			      <0 0x1000b000 0 0x1000>;
+			reg-names = "gpio_base", "iocfg_rt_base", "iocfg_rb_base",
+				    "iocfg_lt_base", "iocfg_lb_base", "iocfg_tr_base",
+				    "iocfg_tl_base", "eint";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pio 0 0 41>, <&pio 66 66 35>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+			#interrupt-cells = <2>;
+		};
+
+		sgmiisys0: syscon@10060000 {
+			compatible = "mediatek,mt7986-sgmiisys_0",
+				     "syscon";
+			reg = <0 0x10060000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		sgmiisys1: syscon@10070000 {
+			compatible = "mediatek,mt7986-sgmiisys_1",
+				     "syscon";
+			reg = <0 0x10070000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		trng: trng@1020f000 {
+			compatible = "mediatek,mt7986-rng",
+				     "mediatek,mt7623-rng";
+			reg = <0 0x1020f000 0 0x100>;
+			clocks = <&infracfg CLK_INFRA_TRNG_CK>;
+			clock-names = "rng";
+			status = "disabled";
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11002000 0 0x400>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_UART0_SEL>,
+				 <&infracfg CLK_INFRA_UART0_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&topckgen CLK_TOP_UART_SEL>,
+					  <&infracfg CLK_INFRA_UART0_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_XTAL>,
+						 <&topckgen CLK_TOP_UART_SEL>;
+			status = "disabled";
+		};
+
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11003000 0 0x400>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_UART1_SEL>,
+				 <&infracfg CLK_INFRA_UART1_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&infracfg CLK_INFRA_UART1_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_F26M_SEL>;
+			status = "disabled";
+		};
+
+		uart2: serial@11004000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11004000 0 0x400>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_UART2_SEL>,
+				 <&infracfg CLK_INFRA_UART2_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&infracfg CLK_INFRA_UART2_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_F26M_SEL>;
+			status = "disabled";
+		};
+
+		ethsys: syscon@15000000 {
+			 #address-cells = <1>;
+			 #size-cells = <1>;
+			 compatible = "mediatek,mt7986-ethsys",
+				      "syscon";
+			 reg = <0 0x15000000 0 0x1000>;
+			 #clock-cells = <1>;
+			 #reset-cells = <1>;
+		};
+
+	};
+
+};
-- 
2.29.2


^ permalink raw reply	[flat|nested] 34+ messages in thread

* Re: [v3,7/9] dt-bindings: arm64: dts: mediatek: Add mt7986 series
  2021-09-24 11:40     ` [v3,7/9] " Sam Shih
@ 2021-10-08 13:53       ` Matthias Brugger
  2021-10-12 10:29         ` Sam Shih
  0 siblings, 1 reply; 34+ messages in thread
From: Matthias Brugger @ 2021-10-08 13:53 UTC (permalink / raw)
  To: Sam Shih
  Cc: Ryder.Lee, devicetree, enric.balletbo, fparent, gregkh, herbert,
	hsinyi, john, linus.walleij, linux-arm-kernel, linux-clk,
	linux-crypto, linux-gpio, linux-kernel, linux-mediatek,
	linux-serial, linux-watchdog, linux, mpm, mturquette, robh+dt,
	sboyd, sean.wang, seiya.wang, wim

Hi Sam,

I'd advise to split this series in parts for:
- basic device support via dts.
- pinctrl driver + dts
- clk driver + dts

I would also advise to not send new versions of patches as new threads and don't 
respond in the same thread. At least for me that breaks my workflow as I use b4.

Regards,
Matthias


On 24/09/2021 13:40, Sam Shih wrote:
> MT7986 series is Mediatek's new 4-core SoC, which is mainly for
> wifi-router application. The difference between mt7986a and mt7986b
> is that some pins do not exist on mt7986b.
> 
> Signed-off-by: Sam Shih <sam.shih@mediatek.com>
> Acked-by: Rob Herring <robh@kernel.org>
> 
> ---
> v3: changed 'MT7986' to 'MT7986 series' in the commit message
> v2: added an Acked-by tag
> ---
>   Documentation/devicetree/bindings/arm/mediatek.yaml | 8 ++++++++
>   1 file changed, 8 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml
> index 80a05f6fee85..a9a778269684 100644
> --- a/Documentation/devicetree/bindings/arm/mediatek.yaml
> +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml
> @@ -76,6 +76,14 @@ properties:
>             - enum:
>                 - mediatek,mt7629-rfb
>             - const: mediatek,mt7629
> +      - items:
> +          - enum:
> +              - mediatek,mt7986a-rfb
> +          - const: mediatek,mt7986a
> +      - items:
> +          - enum:
> +              - mediatek,mt7986b-rfb
> +          - const: mediatek,mt7986b
>         - items:
>             - enum:
>                 - mediatek,mt8127-moose
> 

^ permalink raw reply	[flat|nested] 34+ messages in thread

* Re: [v6,5/9] dt-bindings: pinctrl: update bindings for MT7986 SoC
  2021-10-04  9:41             ` [v6,5/9] " Sam Shih
@ 2021-10-12  1:26               ` Rob Herring
  0 siblings, 0 replies; 34+ messages in thread
From: Rob Herring @ 2021-10-12  1:26 UTC (permalink / raw)
  To: Sam Shih
  Cc: Ryder.Lee, devicetree, enric.balletbo, fparent, gregkh, herbert,
	hsinyi, john, linus.walleij, linux-arm-kernel, linux-clk,
	linux-crypto, linux-gpio, linux-kernel, linux-mediatek,
	linux-serial, linux-watchdog, linux, matthias.bgg, mpm,
	mturquette, sboyd, sean.wang, seiya.wang, wim

On Mon, Oct 04, 2021 at 05:41:40PM +0800, Sam Shih wrote:
> This updates bindings for MT7986 pinctrl driver. The
> difference of pinctrl between mt7986a and mt7986b is that pin-41 to pin-65
> do not exist on mt7986b
> 
> Signed-off-by: Sam Shih <sam.shih@mediatek.com>
> 
> ---
> v6 : fixed yamllint warnings/errors v2
> v5 : fixed yamllint warnings/errors v1
> v4 : used yaml format instead of txt format document
> v3 : make mt7986 pinctrl bindings as a separate file
> v2 : deleted the redundant description of mt7986a/mt7986b
> ---
>  .../pinctrl/mediatek,mt7986-pinctrl.yaml      | 361 ++++++++++++++++++
>  1 file changed, 361 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
> new file mode 100644
> index 000000000000..cde842d093dc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
> @@ -0,0 +1,361 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/mediatek,mt7986-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Mediatek MT7986 Pin Controller Device Tree Bindings
> +
> +maintainers:
> +  - Sean Wang <sean.wang@kernel.org>
> +
> +description: |+
> +  The MediaTek's MT7986 Pin controller is used to control SoC pins.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - mediatek,mt7986a-pinctrl
> +      - mediatek,mt7986b-pinctrl
> +
> +  reg:
> +    minItems: 8
> +    maxItems: 8
> +
> +  reg-names:
> +    items:
> +      - const: gpio_base
> +      - const: iocfg_rt_base
> +      - const: iocfg_rb_base
> +      - const: iocfg_lt_base
> +      - const: iocfg_lb_base
> +      - const: iocfg_tr_base
> +      - const: iocfg_tl_base

_base is redundant. Drop.

> +      - const: eint
> +
> +  gpio-controller: true
> +
> +  "#gpio-cells":
> +    const: 2
> +    description: |
> +      Number of cells in GPIO specifier. Since the generic GPIO
> +      binding is used, the amount of cells must be specified as 2. See the below
> +      mentioned gpio binding representation for description of particular cells.
> +
> +  gpio-ranges:
> +    minItems: 1
> +    maxItems: 5
> +    description: |
> +      GPIO valid number range.
> +
> +  interrupt-controller: true
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  "#interrupt-cells":
> +    const: 2
> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - gpio-controller
> +  - "#gpio-cells"
> +
> +patternProperties:
> +  '-[0-9]+$':

This could be a bit more specific. Most new bindings use '-pins$' here.

> +    type: object
> +    additionalProperties: false
> +
> +    patternProperties:
> +      'mux':

Do you really mean '.*mux.*' because that's what is allowed here. If the 
node name is really just 'mux', then this isn't a pattern and should be 
under 'properties'.

> +        type: object
> +        additionalProperties: false
> +        description: |
> +          pinmux configuration nodes.
> +
> +          Valid value	      function    pins (in pin#)
> +          ---------------------------------------------------------------------
> +          "watchdog"        "watchdog"  0
> +          "wifi_led"        "led"       1, 2
> +          "i2c"             "i2c"       3, 4
> +          "uart1_0"         "uart"      7, 8, 9, 10
> +          "pcie_clk"        "pcie"      9
> +          "pcie_wake"       "pcie"      10
> +          "spi1_0"          "spi"       11, 12, 13, 14
> +          "pwm1_1"          "pwm"       20,
> +          "pwm0"            "pwm"       21,
> +          "pwm1_0"          "pwm"       22,
> +          "snfi"            "flash"     23, 24, 25, 26, 27, 28
> +          "spi1_2"          "spi"       29, 30, 31, 32
> +          "emmc_45"         "emmc"      22, 23, 24, 25, 26, 27, 28, 29, 30,
> +                                        31, 32
> +          "spi1_1"          "spi"       23, 24, 25, 26
> +          "uart1_2"         "uart"      29, 30, 31, 32
> +          "uart1_1"         "uart"      23, 24, 25, 26
> +          "uart2_0"         "uart"      29, 30, 31, 32
> +          "spi0"            "spi"       33, 34, 35, 36
> +          "spi0_wp_hold"    "spi"       37, 38
> +          "uart1_3_rx_tx"   "uart"      35, 36
> +          "uart1_3_cts_rts" "uart"      37, 38
> +          "uart2_1"         "uart"      33, 34, 35, 36
> +          "spi1_3"          "spi"       33, 34, 35, 36
> +          "uart0"           "uart"      39, 40
> +          "pcie_pereset"    "pcie"      41
> +          "uart1"           "uart"      42, 43, 44, 45
> +          "uart2"           "uart"      46, 47, 48, 49
> +          "emmc_51"         "emmc"      50, 51, 52, 53, 54, 55, 56, 57, 57,
> +                                        59, 60, 61
> +          "pcm"             "audio"     62, 63, 64, 65
> +          "i2s"             "audio"     62, 63, 64, 65
> +          "switch_int"      "eth"       66
> +          "mdc_mdio"        "eth"       67
> +
> +        $ref: "/schemas/pinctrl/pinmux-node.yaml"
> +        properties:
> +          function:
> +            description: |
> +              A string containing the name of the function to mux to the group.
> +              There is no "audio", "pcie" functions on mt7986b, you can only use
> +              those functions on mt7986a.
> +            enum: [audio, emmc, eth, i2c, led, flash, pcie, pwm, spi, uart,
> +                   watchdog, wifi]
> +          groups:
> +            description: |
> +              An array of strings. Each string contains the name of a group.
> +              There is no "pcie_pereset", "uart1", "uart2" "emmc_51", "pcm",
> +              and "i2s" groups on mt7986b, you can only use those groups on
> +              mt7986a.
> +        required:
> +          - function
> +          - groups
> +
> +        allOf:
> +          - if:
> +              properties:
> +                function:
> +                  const: audio
> +            then:
> +              properties:
> +                groups:
> +                  enum: [pcm, i2s]
> +          - if:
> +              properties:
> +                function:
> +                  const: emmc
> +            then:
> +              properties:
> +                groups:
> +                  enum: [emmc, emmc_rst]
> +          - if:
> +              properties:
> +                function:
> +                  const: eth
> +            then:
> +              properties:
> +                groups:
> +                  enum: [switch_int, mdc_mdio]
> +          - if:
> +              properties:
> +                function:
> +                  const: i2c
> +            then:
> +              properties:
> +                groups:
> +                  enum: [i2c]
> +          - if:
> +              properties:
> +                function:
> +                  const: led
> +            then:
> +              properties:
> +                groups:
> +                  enum: [wifi_led]
> +          - if:
> +              properties:
> +                function:
> +                  const: flash
> +            then:
> +              properties:
> +                groups:
> +                  enum: [snfi]
> +          - if:
> +              properties:
> +                function:
> +                  const: pcie
> +            then:
> +              properties:
> +                groups:
> +                  enum: [pcie_clk, pcie_wake, pcie_pereset]
> +          - if:
> +              properties:
> +                function:
> +                  const: pwm
> +            then:
> +              properties:
> +                groups:
> +                  enum: [pwm0, pwm1_0, pwm1_1]
> +          - if:
> +              properties:
> +                function:
> +                  const: spi
> +            then:
> +              properties:
> +                groups:
> +                  enum: [spi0, spi0_wp_hold, spi1_0, spi1_1, spi1_2, spi1_3]
> +          - if:
> +              properties:
> +                function:
> +                  const: uart
> +            then:
> +              properties:
> +                groups:
> +                  enum: [uart1_0, uart1_1, uart1_2, uart1_3_rx_tx,
> +                         uart1_3_cts_rts, uart2_0, uart2_1, uart0, uart1, uart2]
> +          - if:
> +              properties:
> +                function:
> +                  const: watchdog
> +            then:
> +              properties:
> +                groups:
> +                  enum: [watchdog]
> +          - if:
> +              properties:
> +                function:
> +                  const: wifi
> +            then:
> +              properties:
> +                groups:
> +                  enum: [wf_2g, wf_5g, wf_dbdc]
> +      'conf':

Same here. pattern or not?

> +        type: object
> +        additionalProperties: false
> +        description: |
> +          pinconf configuration nodes.
> +        $ref: "/schemas/pinctrl/pincfg-node.yaml"
> +
> +        properties:
> +          pins:
> +            description: |
> +              An array of strings. Each string contains the name of a pin.
> +              There is no PIN 41 to PIN 65 above on mt7686b, you can only use
> +              those pins on mt7986a.
> +            enum: [SYS_WATCHDOG, WF2G_LED, WF5G_LED, I2C_SCL, I2C_SDA, GPIO_0,
> +                   GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5, GPIO_6, GPIO_7,
> +                   GPIO_8, GPIO_9, GPIO_10, GPIO_11, GPIO_12, GPIO_13, GPIO_14,
> +                   GPIO_15, PWM0, PWM1, SPI0_CLK, SPI0_MOSI, SPI0_MISO, SPI0_CS,
> +                   SPI0_HOLD, SPI0_WP, SPI1_CLK, SPI1_MOSI, SPI1_MISO, SPI1_CS,
> +                   SPI2_CLK, SPI2_MOSI, SPI2_MISO, SPI2_CS, SPI2_HOLD, SPI2_WP,
> +                   UART0_RXD, UART0_TXD, PCIE_PERESET_N, UART1_RXD, UART1_TXD,
> +                   UART1_CTS, UART1_RTS, UART2_RXD, UART2_TXD, UART2_CTS,
> +                   UART2_RTS, EMMC_DATA_0, EMMC_DATA_1, EMMC_DATA_2,
> +                   EMMC_DATA_3, EMMC_DATA_4, EMMC_DATA_5, EMMC_DATA_6,
> +                   EMMC_DATA_7, EMMC_CMD, EMMC_CK, EMMC_DSL, EMMC_RSTB, PCM_DTX,
> +                   PCM_DRX, PCM_CLK, PCM_FS, MT7531_INT, SMI_MDC, SMI_MDIO,
> +                   WF0_DIG_RESETB, WF0_CBA_RESETB, WF0_XO_REQ, WF0_TOP_CLK,
> +                   WF0_TOP_DATA, WF0_HB1, WF0_HB2, WF0_HB3, WF0_HB4, WF0_HB0,
> +                   WF0_HB0_B, WF0_HB5, WF0_HB6, WF0_HB7, WF0_HB8, WF0_HB9,
> +                   WF0_HB10, WF1_DIG_RESETB, WF1_CBA_RESETB, WF1_XO_REQ,
> +                   WF1_TOP_CLK, WF1_TOP_DATA, WF1_HB1, WF1_HB2, WF1_HB3,
> +                   WF1_HB4, WF1_HB0, WF1_HB0_B, WF1_HB5, WF1_HB6, WF1_HB7,
> +                   WF1_HB8]
> +
> +          bias-disable: true
> +
> +          bias-pull-up: true
> +
> +          bias-pull-down: true
> +
> +          input-enable: true
> +
> +          input-disable: true
> +
> +          output-enable: true
> +
> +          output-low: true
> +
> +          output-high: true
> +
> +          input-schmitt-enable: true
> +
> +          input-schmitt-disable: true
> +
> +          drive-strength:
> +            enum: [2, 4, 6, 8, 10, 12, 14, 16]
> +
> +          mediatek,pull-up-adv:
> +            description: |
> +              Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3'
> +              Pull up setings for 2 pull resistors, R0 and R1. Valid arguments
> +              are described as below:
> +              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
> +              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
> +              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
> +              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
> +            $ref: /schemas/types.yaml#/definitions/uint32
> +            enum: [0, 1, 2, 3]
> +
> +          mediatek,pull-down-adv:
> +            description: |
> +              Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3'
> +              Pull down setings for 2 pull resistors, R0 and R1. Valid arguments
> +              are described as below:
> +              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
> +              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
> +              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
> +              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
> +            $ref: /schemas/types.yaml#/definitions/uint32
> +            enum: [0, 1, 2, 3]
> +
> +        required:
> +          - pins
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    soc {
> +      #address-cells = <2>;
> +      #size-cells = <2>;
> +      pio: pinctrl@1001f000 {
> +        compatible = "mediatek,mt7986a-pinctrl";
> +        reg = <0 0x1001f000 0 0x1000>,
> +              <0 0x11c30000 0 0x1000>,
> +              <0 0x11c40000 0 0x1000>,
> +              <0 0x11e20000 0 0x1000>,
> +              <0 0x11e30000 0 0x1000>,
> +              <0 0x11f00000 0 0x1000>,
> +              <0 0x11f10000 0 0x1000>,
> +              <0 0x1000b000 0 0x1000>;
> +        reg-names = "gpio_base", "iocfg_rt_base", "iocfg_rb_base",
> +              "iocfg_lt_base", "iocfg_lb_base", "iocfg_tr_base",
> +              "iocfg_tl_base", "eint";
> +        gpio-controller;
> +        #gpio-cells = <2>;
> +        gpio-ranges = <&pio 0 0 100>;
> +        interrupt-controller;
> +        interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
> +        interrupt-parent = <&gic>;
> +        #interrupt-cells = <2>;
> +
> +        uart1_pins: uart1-pins-42-to-45 {
> +          mux {
> +            function = "uart";
> +            groups = "uart1";
> +          };
> +        };
> +
> +        uart2_pins: uart1-pins-46-to-49 {
> +          mux {
> +            function = "uart";
> +            groups = "uart2";
> +          };
> +        };
> +
> +      };
> +    };
> -- 
> 2.29.2
> 
> 

^ permalink raw reply	[flat|nested] 34+ messages in thread

* Re: [v3,7/9] dt-bindings: arm64: dts: mediatek: Add mt7986 series
  2021-10-08 13:53       ` Matthias Brugger
@ 2021-10-12 10:29         ` Sam Shih
  2021-10-13 16:08           ` Matthias Brugger
  0 siblings, 1 reply; 34+ messages in thread
From: Sam Shih @ 2021-10-12 10:29 UTC (permalink / raw)
  To: Matthias Brugger
  Cc: Ryder.Lee, devicetree, enric.balletbo, fparent, gregkh, herbert,
	hsinyi, john, linus.walleij, linux-arm-kernel, linux-clk,
	linux-crypto, linux-gpio, linux-kernel, linux-mediatek,
	linux-serial, linux-watchdog, linux, mpm, mturquette, robh+dt,
	sboyd, sean.wang, seiya.wang, wim

Hi

On Fri, 2021-10-08 at 15:53 +0200, Matthias Brugger wrote:
> Hi Sam,
> 
> I'd advise to split this series in parts for:
> - basic device support via dts.
> - pinctrl driver + dts
> - clk driver + dts

Okay, I will split the patches that are still under review into the
above patch series.

But I have a dumb question, currently, we have some patches that have
been assigned version numbers.
If I want to seprate original patch series, and resend 3 new patch
series (basic / pinctrl / clock) according to your comment, if I want
to keep the preview change log, tags in the patch set: 

like:
---
v3: changed 'MT7986' to 'MT7986 series' in the commit message
v2: added an Acked-by tag
---

Which version number should I use for these new patch series ?

Does the version number in corver-letter and the version number in each
patch need to be the same in the entire patch series ?

// (Original patch series/thread, version number is v3)
[PATCH v3 0/3] Add basic SoC support for mediatek mt7986
  [PATCH v3 1/3] dt-bindings: arm64: dts: mediatek: Add mt7986 series
  // (the version number has been updated to v5 previously)
  // (basic part only, not include pinctrl and clock nodes)
  [PATCH v5 2/3] arm64: dts: mediatek: add mt7986a support
  [PATCH v5 3/3] arm64: dts: mediatek: add mt7986b support

// (New clock driver patch series)
[PATCH 0/3] Add clock driver support for mediatek mt7986
  [PATCH v3,1/3] dt-bindings: clock: mediatek: document clk bindings   
for mediatek mt7986 SoC
  // (the version number has been updated to v3 previously)
  [PATCH v3 2/3] clk: mediatek: add mt7986 clock IDs
  [PATCH v2 3/3] clk: mediatek: add mt7986 clock support

// (New pinctrl driver patch series)
[PATCH 0/4] Add pinctrl driver support for mediatek mt7986
  // (the version number has been updated to v6 previously)
  [PATCH v6 1/4] dt-bindings: pinctrl: update bindings for MT7986 SoC
  // (the version number has been updated to v2 previously)
  [PATCH v2 2/4] pinctrl: mediatek: add support for MT7986 SoC
  [PATCH 3/4] arm64: dts: mediatek: add mt7986a pinctrl support
  [PATCH 3/4] arm64: dts: mediatek: add mt7986b pinctrl support

> 
> I would also advise to not send new versions of patches as new
> threads and don't 
> respond in the same thread. At least for me that breaks my workflow
> as I use b4.

If I don't respond to the next patch set in the same thread, should I
create an entire new patch series ?

For example, if I want to update PATCH 2/3 in the bellows patch series,
and my PATCH 1/3 has been accepted by reviewer previously

[PATCH v2 0/3] Add basic SoC support for mediatek mt7986
  [PATCH v2 1/3] ...   (patch set v1, applied by matainer)
  [PATCH v2 2/3] ...   (patch set v2, need to be upgrade to v3)
  [PATCH v2 3/3] ...   (patch set v1, waiting for review)

Is this correct to send patch mail to maintaiers for the above
situation ?

[PATCH v3 0/2] Add basic SoC support for mediatek mt7986
  [PATCH v3 1/2] ...   (patch set v3)
  [PATCH v3 2/2] ...   (still patch set v1, waiting for review)


> 
> Regards,
> Matthias
> 
> 
> On 24/09/2021 13:40, Sam Shih wrote:
> > MT7986 series is Mediatek's new 4-core SoC, which is mainly for
> > wifi-router application. The difference between mt7986a and mt7986b
> > is that some pins do not exist on mt7986b.
> > 
> > Signed-off-by: Sam Shih <sam.shih@mediatek.com>
> > Acked-by: Rob Herring <robh@kernel.org>
> > 
> > ---
> > v3: changed 'MT7986' to 'MT7986 series' in the commit message
> > v2: added an Acked-by tag
> > ---
> >   Documentation/devicetree/bindings/arm/mediatek.yaml | 8 ++++++++
> >   1 file changed, 8 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml
> > b/Documentation/devicetree/bindings/arm/mediatek.yaml
> > index 80a05f6fee85..a9a778269684 100644
> > --- a/Documentation/devicetree/bindings/arm/mediatek.yaml
> > +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml
> > @@ -76,6 +76,14 @@ properties:
> >             - enum:
> >                 - mediatek,mt7629-rfb
> >             - const: mediatek,mt7629
> > +      - items:
> > +          - enum:
> > +              - mediatek,mt7986a-rfb
> > +          - const: mediatek,mt7986a
> > +      - items:
> > +          - enum:
> > +              - mediatek,mt7986b-rfb
> > +          - const: mediatek,mt7986b
> >         - items:
> >             - enum:
> >                 - mediatek,mt8127-moose
> > 

Thanks,
Sam


^ permalink raw reply	[flat|nested] 34+ messages in thread

* Re: [v3,7/9] dt-bindings: arm64: dts: mediatek: Add mt7986 series
  2021-10-12 10:29         ` Sam Shih
@ 2021-10-13 16:08           ` Matthias Brugger
  0 siblings, 0 replies; 34+ messages in thread
From: Matthias Brugger @ 2021-10-13 16:08 UTC (permalink / raw)
  To: Sam Shih
  Cc: Ryder.Lee, devicetree, enric.balletbo, fparent, gregkh, herbert,
	hsinyi, john, linus.walleij, linux-arm-kernel, linux-clk,
	linux-crypto, linux-gpio, linux-kernel, linux-mediatek,
	linux-serial, linux-watchdog, linux, mpm, mturquette, robh+dt,
	sboyd, sean.wang, seiya.wang, wim

Hi Sam,

On 12/10/2021 12:29, Sam Shih wrote:
> Hi
> 
> On Fri, 2021-10-08 at 15:53 +0200, Matthias Brugger wrote:
>> Hi Sam,
>>
>> I'd advise to split this series in parts for:
>> - basic device support via dts.
>> - pinctrl driver + dts
>> - clk driver + dts
> 
> Okay, I will split the patches that are still under review into the
> above patch series.
> 
> But I have a dumb question, currently, we have some patches that have
> been assigned version numbers.
> If I want to seprate original patch series, and resend 3 new patch
> series (basic / pinctrl / clock) according to your comment, if I want
> to keep the preview change log, tags in the patch set:
> 
> like:
> ---
> v3: changed 'MT7986' to 'MT7986 series' in the commit message
> v2: added an Acked-by tag
> ---
> 
> Which version number should I use for these new patch series ?
> 

I'd use v4 keeping the change-log and adding a link with hint to v3 in the cover 
letter.

> Does the version number in corver-letter and the version number in each
> patch need to be the same in the entire patch series ?
> 

Yes, otherwise the version number doesn't make to much sense.

> // (Original patch series/thread, version number is v3)
> [PATCH v3 0/3] Add basic SoC support for mediatek mt7986
>    [PATCH v3 1/3] dt-bindings: arm64: dts: mediatek: Add mt7986 series
>    // (the version number has been updated to v5 previously)
>    // (basic part only, not include pinctrl and clock nodes)
>    [PATCH v5 2/3] arm64: dts: mediatek: add mt7986a support
>    [PATCH v5 3/3] arm64: dts: mediatek: add mt7986b support

use v6 explaining where in the mailing list one can find v5.

> 
> // (New clock driver patch series)
> [PATCH 0/3] Add clock driver support for mediatek mt7986
>    [PATCH v3,1/3] dt-bindings: clock: mediatek: document clk bindings
> for mediatek mt7986 SoC
>    // (the version number has been updated to v3 previously)
>    [PATCH v3 2/3] clk: mediatek: add mt7986 clock IDs
>    [PATCH v2 3/3] clk: mediatek: add mt7986 clock support
> 

Same here, use v4.

> // (New pinctrl driver patch series)
> [PATCH 0/4] Add pinctrl driver support for mediatek mt7986
>    // (the version number has been updated to v6 previously)
>    [PATCH v6 1/4] dt-bindings: pinctrl: update bindings for MT7986 SoC
>    // (the version number has been updated to v2 previously)
>    [PATCH v2 2/4] pinctrl: mediatek: add support for MT7986 SoC
>    [PATCH 3/4] arm64: dts: mediatek: add mt7986a pinctrl support
>    [PATCH 3/4] arm64: dts: mediatek: add mt7986b pinctrl support
> 

use v7 here.

>>
>> I would also advise to not send new versions of patches as new
>> threads and don't
>> respond in the same thread. At least for me that breaks my workflow
>> as I use b4.
> 
> If I don't respond to the next patch set in the same thread, should I
> create an entire new patch series ?
> 

Respond to any review comments in the thread but once you are ready to send a 
new version of the patch, send the whole series with an incremented

> For example, if I want to update PATCH 2/3 in the bellows patch series,
> and my PATCH 1/3 has been accepted by reviewer previously
> 
> [PATCH v2 0/3] Add basic SoC support for mediatek mt7986
>    [PATCH v2 1/3] ...   (patch set v1, applied by matainer)

beware: applied != accepted
reviewer != maintainer

if the patch got applied to some maintainer repo, then in the next version drop 
that patch (it is already applied) but mention that in the cover letter.

>    [PATCH v2 2/3] ...   (patch set v2, need to be upgrade to v3)
>    [PATCH v2 3/3] ...   (patch set v1, waiting for review)
> 

This series would be v3, if 1/3 is applied, drop. 2/3 will have changes and 3/3 
will be the same as in v2.

> Is this correct to send patch mail to maintaiers for the above
> situation ?
> 
> [PATCH v3 0/2] Add basic SoC support for mediatek mt7986
>    [PATCH v3 1/2] ...   (patch set v3)
>    [PATCH v3 2/2] ...   (still patch set v1, waiting for review)
> 

yes, that's how is expected you send your patches.

Let me know if you have any further questions :)

Regards,
Matthias

> 
>>
>> Regards,
>> Matthias
>>
>>
>> On 24/09/2021 13:40, Sam Shih wrote:
>>> MT7986 series is Mediatek's new 4-core SoC, which is mainly for
>>> wifi-router application. The difference between mt7986a and mt7986b
>>> is that some pins do not exist on mt7986b.
>>>
>>> Signed-off-by: Sam Shih <sam.shih@mediatek.com>
>>> Acked-by: Rob Herring <robh@kernel.org>
>>>
>>> ---
>>> v3: changed 'MT7986' to 'MT7986 series' in the commit message
>>> v2: added an Acked-by tag
>>> ---
>>>    Documentation/devicetree/bindings/arm/mediatek.yaml | 8 ++++++++
>>>    1 file changed, 8 insertions(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml
>>> b/Documentation/devicetree/bindings/arm/mediatek.yaml
>>> index 80a05f6fee85..a9a778269684 100644
>>> --- a/Documentation/devicetree/bindings/arm/mediatek.yaml
>>> +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml
>>> @@ -76,6 +76,14 @@ properties:
>>>              - enum:
>>>                  - mediatek,mt7629-rfb
>>>              - const: mediatek,mt7629
>>> +      - items:
>>> +          - enum:
>>> +              - mediatek,mt7986a-rfb
>>> +          - const: mediatek,mt7986a
>>> +      - items:
>>> +          - enum:
>>> +              - mediatek,mt7986b-rfb
>>> +          - const: mediatek,mt7986b
>>>          - items:
>>>              - enum:
>>>                  - mediatek,mt8127-moose
>>>
> 
> Thanks,
> Sam
> 

^ permalink raw reply	[flat|nested] 34+ messages in thread

end of thread, other threads:[~2021-10-13 16:08 UTC | newest]

Thread overview: 34+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-09-14  8:51 [v3,0/9] Add basic SoC support for mediatek mt7986 Sam Shih
2021-09-14  8:51 ` [v3,1/9] dt-bindings: clock: mediatek: document clk bindings for mediatek mt7986 SoC Sam Shih
2021-09-14  8:51 ` [v3,2/9] clk: mediatek: add mt7986 clock IDs Sam Shih
2021-09-14  8:51 ` [RESEND,v2,3/9] clk: mediatek: add mt7986 clock support Sam Shih
2021-09-14  8:51 ` [RESEND,v3,4/9] pinctrl: mediatek: moore: check if pin_desc is valid before use Sam Shih
2021-09-16 10:07   ` Linus Walleij
2021-09-14  8:51 ` [v3,5/9] dt-bindings: pinctrl: update bindings for MT7986 SoC Sam Shih
2021-09-14 18:00   ` Matthias Brugger
2021-09-24 11:44     ` [v4,5/9] " Sam Shih
2021-09-24 13:59       ` Rob Herring
2021-09-27  2:34         ` [v5,5/9] " Sam Shih
2021-09-27 12:23           ` Rob Herring
2021-10-04  9:41             ` [v6,5/9] " Sam Shih
2021-10-12  1:26               ` Rob Herring
2021-09-14  8:51 ` [v4,6/9] pinctrl: mediatek: add support " Sam Shih
2021-09-14  8:51 ` [RESEND,v2,7/9] dt-bindings: arm64: dts: mediatek: Add mt7986 series Sam Shih
2021-09-14 18:00   ` Matthias Brugger
2021-09-24 11:40     ` [v3,7/9] " Sam Shih
2021-10-08 13:53       ` Matthias Brugger
2021-10-12 10:29         ` Sam Shih
2021-10-13 16:08           ` Matthias Brugger
2021-09-14  8:51 ` [RESEND,v2,8/9] arm64: dts: mediatek: add mt7986a support Sam Shih
2021-09-14 17:55   ` Matthias Brugger
2021-09-24 11:20     ` [v3,8/9] " Sam Shih
2021-09-27 12:41       ` Marc Zyngier
2021-10-04  9:12         ` [v4,8/9] " Sam Shih
2021-10-04 10:00           ` Marc Zyngier
2021-10-04 10:07           ` Marc Zyngier
2021-10-04 12:41             ` [v5,8/9] " Sam Shih
2021-09-14  8:51 ` [RESEND,v2,9/9] arm64: dts: mediatek: add mt7986b support Sam Shih
2021-09-24 11:27   ` [v3,9/9] " Sam Shih
2021-10-04  9:16     ` [v4,9/9] " Sam Shih
2021-10-04 10:09       ` Marc Zyngier
2021-10-04 12:42         ` [v5,9/9] " Sam Shih

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).