linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Luis R. Rodriguez" <lrodriguez@atheros.com>
To: linville@tuxdriver.com
Cc: linux-wireless@vger.kernel.org,
	Vasanthakumar Thiagarajan <vasanth@atheros.com>
Subject: [PATCH v3 19/97] ath9k_hw: Add hw cap flag for EDMA for the AR9003 family
Date: Thu, 15 Apr 2010 17:38:24 -0400	[thread overview]
Message-ID: <1271367582-992-20-git-send-email-lrodriguez@atheros.com> (raw)
In-Reply-To: <1271367582-992-1-git-send-email-lrodriguez@atheros.com>

From: Vasanthakumar Thiagarajan <vasanth@atheros.com>

AR9003 supports extended DMA (EDMA), this comes with some
bells and whistles on top of the legacy DMA that we are used
to. Mark AR9003 and later chips EDMA capable.

Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
---
 drivers/net/wireless/ath/ath9k/hw.c |    3 +++
 drivers/net/wireless/ath/ath9k/hw.h |    1 +
 2 files changed, 4 insertions(+), 0 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index e54c76e..2a3ff65 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -2874,6 +2874,9 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah)
 		btcoex_hw->scheme = ATH_BTCOEX_CFG_NONE;
 	}
 
+	if (AR_SREV_9300_20_OR_LATER(ah))
+		pCap->hw_caps |= ATH9K_HW_CAP_EDMA;
+
 	return 0;
 }
 
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 3bc3621..d89af6e 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -165,6 +165,7 @@ enum ath9k_hw_caps {
 	ATH9K_HW_CAP_ENHANCEDPM                 = BIT(14),
 	ATH9K_HW_CAP_AUTOSLEEP                  = BIT(15),
 	ATH9K_HW_CAP_4KB_SPLITTRANS             = BIT(16),
+	ATH9K_HW_CAP_EDMA			= BIT(17),
 };
 
 enum ath9k_capability_type {
-- 
1.6.3.3


  parent reply	other threads:[~2010-04-15 21:39 UTC|newest]

Thread overview: 103+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-04-15 21:38 [PATCH v3 00/97] ath9k: add AR9003 support Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 01/97] ath9k_hw: start building an abstraction layer for hardware routines Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 02/97] ath9k_hw: add silicon revision macros for AR9300 Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 03/97] ath9k_hw: add a macro for abstracting generic timer access Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 04/97] ath9k_hw: fix a missing hex prefix for a register mask Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 05/97] ath9k_hw: add simple register abstraction for some AR9300 registers Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 06/97] ath9k_hw: add support for GPIO differences on AR9003 Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 07/97] ath9k_hw: AR9003 does not have AR_RC_AHB skip its setting Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 08/97] ath9k_hw: remove wrapper ath9k_hw_write_regs() Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 09/97] ath9k_hw: Move some RF ops to the private callbacks Luis R. Rodriguez
2010-04-16 19:43   ` John W. Linville
2010-04-16 19:56     ` Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 10/97] ath9k_hw: skip PLL initialization on AR9003 on Power-On-Reset Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 11/97] ath9k_hw: add some comments for ath9k_set_power_network_sleep() Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 12/97] ath9k_hw: add a private callback for PLL control computation Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 13/97] ath9k_hw: Add the PCI IDs for AR9300 and fill up the pci_id_tables Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 14/97] ath9k_hw: Add AR9003 PHY support Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 15/97] ath9k_hw: move init config and default after chip is up Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 16/97] ath9k_hw: add the AR9003 ar9003_hw_macversion_supported() Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 17/97] ath9k_hw: disable ANI for AR9003 Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 18/97] ath9k: disable the MIB interrupt if ANI is disabled Luis R. Rodriguez
2010-04-15 21:38 ` Luis R. Rodriguez [this message]
2010-04-15 21:38 ` [PATCH v3 20/97] ath9k_hw: Fill few hw cap for edma Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 21/97] ath9k_hw: Add abstraction for rx enable Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 22/97] ath9k_hw: Fill rx_enable() for the AR9003 hardware family Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 23/97] ath9k_hw: Add few routines for rx edma support Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 24/97] ath9k_hw: update the chip tests for AR9003 Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 25/97] ath9k_hw: prevent reset control register zeroing on AR9003 reset Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 26/97] ath9k_hw: Add AR9003 PHY register definitions Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 27/97] ath9k_hw: add common channel select helpers for ar900[23] Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 28/97] ath9k_hw: Set the channel on AR9003 Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 29/97] ath9k_hw: Implement PLL control " Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 30/97] ath9k_hw: Implement spur mitigation " Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 31/97] ath9k_hw: split initvals.h by hardware family Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 32/97] ath9k_hw: add initvals for the AR9003 " Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 33/97] ath9k_hw: add helpers for processing the AR9003 INI Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 34/97] ath9k_hw: Split off ANI control to the PHY ops Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 35/97] ath9k_hw: add all the AR9003 PHY callbacks Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 36/97] ath9k_hw: Define tx control struct for AR9003 Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 37/97] ath9k_hw: Move code which populates ds_data to ath9k_hw Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 38/97] ath9k_hw: Add abstraction to set/get link pointer Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 39/97] ath9k: Use abstraction to get " Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 40/97] ath9k: Use memcpy in ath_clone_txbuf() Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 41/97] ath9k: Remove ATH9K_TX_SW_ABORTED and introduce a bool for this purpose Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 42/97] ath9k: Make bf_desc of ath_buf opaque Luis R. Rodriguez
2010-04-16 22:00   ` Pavel Roskin
2010-04-16 22:09     ` Felix Fietkau
2010-04-19 15:53       ` Pavel Roskin
2010-04-15 21:38 ` [PATCH v3 43/97] ath9k: Add Rx EDMA support Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 44/97] ath9k_hw: Split out the function for reading the noise floor Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 45/97] ath9k_hw: the eep_map is used only for AR9280 PCI card ini fixup Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 46/97] ath9k_hw: add a helper for Power Amplifier calibration for AR9002 Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 47/97] ath9k_hw: add a helper for the OLC tem compensation " Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 48/97] ath9k_hw: rename PA calib for AR9287 Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 49/97] ath9k_hw: shift code for AR9280 OLC temp comp Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 50/97] ath9k_hw: move the AR9280 OLC temp comp to its own helper Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 51/97] ath9k_hw: simplify OLC temp compensation for AR9002 Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 52/97] ath9k_hw: rename the PA calib routines to match their families Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 53/97] ath9k_hw: rename getNoiseFloorThresh() to ath9k_hw_loadnf() Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 54/97] ath9k_hw: move the cal AR9100 calibration settings Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 55/97] ath9k_hw: split calib code by hardware families Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 56/97] ath9k_hw: add the AR9003 ar9003_hw_init_cal callback Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 57/97] ath9k_hw: add the config_pci_powersave AR9003 callback Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 58/97] ath9k_hw: split the generic hardware code by hardware family Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 59/97] ath9k_hw: move the cck channel 14 INI to the AR9002 hw code Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 60/97] ath9k_hw: move TX/RX gain INI stuff to its own hardware family code Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 61/97] ath9k_hw: Abstract the routine which returns interrupt status Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 62/97] ath9k_hw: Initialize interrupt mask for AR9003 Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 63/97] ath9k_hw: abstract the AR_PHY_AGC_CONTROL register access Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 64/97] ath9k_hw: abstract loading noisefloor Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 65/97] ath9k_hw: fill in the callbacks for calibration for AR9003 Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 66/97] ath9k_hw: complete AR9003 calibration Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 67/97] ath9k_hw: rename eep_AR9287_ops to eep_ar9287_ops Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 68/97] ath9k_hw: restore mac address reading logic Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 69/97] ath9k_hw: Implement AR9003 eeprom callbacks Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 70/97] ath9k_hw: add OFDM spur mitigation for AR9003 Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 71/97] ath9k_hw: Fill get_isr() " Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 72/97] ath9k_hw: move AR9280 PCI EEPROM fix to eeprom_def.c Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 73/97] ath9k_hw: move the RF claim stuff to AR9002 hardware family Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 74/97] ath9k_hw: Configure Tx interrupt mitigation timer Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 75/97] ath9k_hw: add the AR9300 SREV hw name print Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 76/97] ath9k_hw: add TX/RX gain register initialization for AR9003 Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 77/97] ath9k_hw: Update ath9k_hw_set_dma for AR9300 Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 78/97] ath9k_hw: skip asynch fifo enablement to AR9003 Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 79/97] ath9k_hw: skip WEP aggregation enable code for AR9003 Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 80/97] ath9k: Load SW filtered NF values and start NF cal during full reset " Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 81/97] ath9k_hw: Define abstraction for tx desc access Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 82/97] ath9k_hw: Add function to configure tx status ring buffer Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 83/97] ath9k_hw: move AR9002 mac ops to its own file Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 84/97] ath9k_hw: Fill descriptor abstrations for AR9003 Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 85/97] ath9k: add RXLP and RXHP to debugfs counters Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 86/97] ath9k_hw: enable CRC check of descriptors for AR9003 Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 87/97] ath9k_hw: set cwmin and cwmax to 0 for for AR9003 upon txq reset Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 88/97] ath9k: Setup appropriate tx desc for regular dma and edma Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 89/97] ath9k: Initialize and configure tx status for EDMA Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 90/97] ath9k_hw: Compute pointer checksum over the link descriptor Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 91/97] ath9k: Add Tx EDMA support Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 92/97] mac80211: add LDPC control flag Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 93/97] ath9k_hw: add LDPC support for AR9003 Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 94/97] ath9k: add LDPC support Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 95/97] ath9k: Enable TXOK and TXERR interrupts for TX EDMA Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 96/97] ath9k_hw: Abort rx if hw is not coming out of full sleep in reset Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 97/97] ath9k_hw: add the PCI ID for the first AR9300 device Luis R. Rodriguez

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1271367582-992-20-git-send-email-lrodriguez@atheros.com \
    --to=lrodriguez@atheros.com \
    --cc=linux-wireless@vger.kernel.org \
    --cc=linville@tuxdriver.com \
    --cc=vasanth@atheros.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).