From: "Luis R. Rodriguez" <lrodriguez@atheros.com>
To: linville@tuxdriver.com
Cc: linux-wireless@vger.kernel.org, Felix Fietkau <nbd@openwrt.org>
Subject: [PATCH v3 34/97] ath9k_hw: Split off ANI control to the PHY ops
Date: Thu, 15 Apr 2010 17:38:39 -0400 [thread overview]
Message-ID: <1271367582-992-35-git-send-email-lrodriguez@atheros.com> (raw)
In-Reply-To: <1271367582-992-1-git-send-email-lrodriguez@atheros.com>
From: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
drivers/net/wireless/ath/ath9k/ani.c | 186 +--------------------------
drivers/net/wireless/ath/ath9k/ar5008_phy.c | 184 ++++++++++++++++++++++++++
drivers/net/wireless/ath/ath9k/ar9003_phy.c | 8 +
drivers/net/wireless/ath/ath9k/hw-ops.h | 6 +
drivers/net/wireless/ath/ath9k/hw.h | 2 +
5 files changed, 201 insertions(+), 185 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
index 031802c..5a2d867 100644
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -15,7 +15,7 @@
*/
#include "hw.h"
-#include "ar9002_phy.h"
+#include "hw-ops.h"
static int ath9k_hw_get_ani_channel_idx(struct ath_hw *ah,
struct ath9k_channel *chan)
@@ -38,190 +38,6 @@ static int ath9k_hw_get_ani_channel_idx(struct ath_hw *ah,
return 0;
}
-static bool ath9k_hw_ani_control(struct ath_hw *ah,
- enum ath9k_ani_cmd cmd, int param)
-{
- struct ar5416AniState *aniState = ah->curani;
- struct ath_common *common = ath9k_hw_common(ah);
-
- switch (cmd & ah->ani_function) {
- case ATH9K_ANI_NOISE_IMMUNITY_LEVEL:{
- u32 level = param;
-
- if (level >= ARRAY_SIZE(ah->totalSizeDesired)) {
- ath_print(common, ATH_DBG_ANI,
- "level out of range (%u > %u)\n",
- level,
- (unsigned)ARRAY_SIZE(ah->totalSizeDesired));
- return false;
- }
-
- REG_RMW_FIELD(ah, AR_PHY_DESIRED_SZ,
- AR_PHY_DESIRED_SZ_TOT_DES,
- ah->totalSizeDesired[level]);
- REG_RMW_FIELD(ah, AR_PHY_AGC_CTL1,
- AR_PHY_AGC_CTL1_COARSE_LOW,
- ah->coarse_low[level]);
- REG_RMW_FIELD(ah, AR_PHY_AGC_CTL1,
- AR_PHY_AGC_CTL1_COARSE_HIGH,
- ah->coarse_high[level]);
- REG_RMW_FIELD(ah, AR_PHY_FIND_SIG,
- AR_PHY_FIND_SIG_FIRPWR,
- ah->firpwr[level]);
-
- if (level > aniState->noiseImmunityLevel)
- ah->stats.ast_ani_niup++;
- else if (level < aniState->noiseImmunityLevel)
- ah->stats.ast_ani_nidown++;
- aniState->noiseImmunityLevel = level;
- break;
- }
- case ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION:{
- const int m1ThreshLow[] = { 127, 50 };
- const int m2ThreshLow[] = { 127, 40 };
- const int m1Thresh[] = { 127, 0x4d };
- const int m2Thresh[] = { 127, 0x40 };
- const int m2CountThr[] = { 31, 16 };
- const int m2CountThrLow[] = { 63, 48 };
- u32 on = param ? 1 : 0;
-
- REG_RMW_FIELD(ah, AR_PHY_SFCORR_LOW,
- AR_PHY_SFCORR_LOW_M1_THRESH_LOW,
- m1ThreshLow[on]);
- REG_RMW_FIELD(ah, AR_PHY_SFCORR_LOW,
- AR_PHY_SFCORR_LOW_M2_THRESH_LOW,
- m2ThreshLow[on]);
- REG_RMW_FIELD(ah, AR_PHY_SFCORR,
- AR_PHY_SFCORR_M1_THRESH,
- m1Thresh[on]);
- REG_RMW_FIELD(ah, AR_PHY_SFCORR,
- AR_PHY_SFCORR_M2_THRESH,
- m2Thresh[on]);
- REG_RMW_FIELD(ah, AR_PHY_SFCORR,
- AR_PHY_SFCORR_M2COUNT_THR,
- m2CountThr[on]);
- REG_RMW_FIELD(ah, AR_PHY_SFCORR_LOW,
- AR_PHY_SFCORR_LOW_M2COUNT_THR_LOW,
- m2CountThrLow[on]);
-
- REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT,
- AR_PHY_SFCORR_EXT_M1_THRESH_LOW,
- m1ThreshLow[on]);
- REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT,
- AR_PHY_SFCORR_EXT_M2_THRESH_LOW,
- m2ThreshLow[on]);
- REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT,
- AR_PHY_SFCORR_EXT_M1_THRESH,
- m1Thresh[on]);
- REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT,
- AR_PHY_SFCORR_EXT_M2_THRESH,
- m2Thresh[on]);
-
- if (on)
- REG_SET_BIT(ah, AR_PHY_SFCORR_LOW,
- AR_PHY_SFCORR_LOW_USE_SELF_CORR_LOW);
- else
- REG_CLR_BIT(ah, AR_PHY_SFCORR_LOW,
- AR_PHY_SFCORR_LOW_USE_SELF_CORR_LOW);
-
- if (!on != aniState->ofdmWeakSigDetectOff) {
- if (on)
- ah->stats.ast_ani_ofdmon++;
- else
- ah->stats.ast_ani_ofdmoff++;
- aniState->ofdmWeakSigDetectOff = !on;
- }
- break;
- }
- case ATH9K_ANI_CCK_WEAK_SIGNAL_THR:{
- const int weakSigThrCck[] = { 8, 6 };
- u32 high = param ? 1 : 0;
-
- REG_RMW_FIELD(ah, AR_PHY_CCK_DETECT,
- AR_PHY_CCK_DETECT_WEAK_SIG_THR_CCK,
- weakSigThrCck[high]);
- if (high != aniState->cckWeakSigThreshold) {
- if (high)
- ah->stats.ast_ani_cckhigh++;
- else
- ah->stats.ast_ani_ccklow++;
- aniState->cckWeakSigThreshold = high;
- }
- break;
- }
- case ATH9K_ANI_FIRSTEP_LEVEL:{
- const int firstep[] = { 0, 4, 8 };
- u32 level = param;
-
- if (level >= ARRAY_SIZE(firstep)) {
- ath_print(common, ATH_DBG_ANI,
- "level out of range (%u > %u)\n",
- level,
- (unsigned) ARRAY_SIZE(firstep));
- return false;
- }
- REG_RMW_FIELD(ah, AR_PHY_FIND_SIG,
- AR_PHY_FIND_SIG_FIRSTEP,
- firstep[level]);
- if (level > aniState->firstepLevel)
- ah->stats.ast_ani_stepup++;
- else if (level < aniState->firstepLevel)
- ah->stats.ast_ani_stepdown++;
- aniState->firstepLevel = level;
- break;
- }
- case ATH9K_ANI_SPUR_IMMUNITY_LEVEL:{
- const int cycpwrThr1[] =
- { 2, 4, 6, 8, 10, 12, 14, 16 };
- u32 level = param;
-
- if (level >= ARRAY_SIZE(cycpwrThr1)) {
- ath_print(common, ATH_DBG_ANI,
- "level out of range (%u > %u)\n",
- level,
- (unsigned) ARRAY_SIZE(cycpwrThr1));
- return false;
- }
- REG_RMW_FIELD(ah, AR_PHY_TIMING5,
- AR_PHY_TIMING5_CYCPWR_THR1,
- cycpwrThr1[level]);
- if (level > aniState->spurImmunityLevel)
- ah->stats.ast_ani_spurup++;
- else if (level < aniState->spurImmunityLevel)
- ah->stats.ast_ani_spurdown++;
- aniState->spurImmunityLevel = level;
- break;
- }
- case ATH9K_ANI_PRESENT:
- break;
- default:
- ath_print(common, ATH_DBG_ANI,
- "invalid cmd %u\n", cmd);
- return false;
- }
-
- ath_print(common, ATH_DBG_ANI, "ANI parameters:\n");
- ath_print(common, ATH_DBG_ANI,
- "noiseImmunityLevel=%d, spurImmunityLevel=%d, "
- "ofdmWeakSigDetectOff=%d\n",
- aniState->noiseImmunityLevel,
- aniState->spurImmunityLevel,
- !aniState->ofdmWeakSigDetectOff);
- ath_print(common, ATH_DBG_ANI,
- "cckWeakSigThreshold=%d, "
- "firstepLevel=%d, listenTime=%d\n",
- aniState->cckWeakSigThreshold,
- aniState->firstepLevel,
- aniState->listenTime);
- ath_print(common, ATH_DBG_ANI,
- "cycleCount=%d, ofdmPhyErrCount=%d, cckPhyErrCount=%d\n\n",
- aniState->cycleCount,
- aniState->ofdmPhyErrCount,
- aniState->cckPhyErrCount);
-
- return true;
-}
-
static void ath9k_hw_update_mibstats(struct ath_hw *ah,
struct ath9k_mib_stats *stats)
{
diff --git a/drivers/net/wireless/ath/ath9k/ar5008_phy.c b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
index 9685f4c..dddca59 100644
--- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
@@ -1015,6 +1015,189 @@ static u32 ar5008_hw_compute_pll_control(struct ath_hw *ah,
return pll;
}
+static bool ar5008_hw_ani_control(struct ath_hw *ah,
+ enum ath9k_ani_cmd cmd, int param)
+{
+ struct ar5416AniState *aniState = ah->curani;
+ struct ath_common *common = ath9k_hw_common(ah);
+
+ switch (cmd & ah->ani_function) {
+ case ATH9K_ANI_NOISE_IMMUNITY_LEVEL:{
+ u32 level = param;
+
+ if (level >= ARRAY_SIZE(ah->totalSizeDesired)) {
+ ath_print(common, ATH_DBG_ANI,
+ "level out of range (%u > %u)\n",
+ level,
+ (unsigned)ARRAY_SIZE(ah->totalSizeDesired));
+ return false;
+ }
+
+ REG_RMW_FIELD(ah, AR_PHY_DESIRED_SZ,
+ AR_PHY_DESIRED_SZ_TOT_DES,
+ ah->totalSizeDesired[level]);
+ REG_RMW_FIELD(ah, AR_PHY_AGC_CTL1,
+ AR_PHY_AGC_CTL1_COARSE_LOW,
+ ah->coarse_low[level]);
+ REG_RMW_FIELD(ah, AR_PHY_AGC_CTL1,
+ AR_PHY_AGC_CTL1_COARSE_HIGH,
+ ah->coarse_high[level]);
+ REG_RMW_FIELD(ah, AR_PHY_FIND_SIG,
+ AR_PHY_FIND_SIG_FIRPWR,
+ ah->firpwr[level]);
+
+ if (level > aniState->noiseImmunityLevel)
+ ah->stats.ast_ani_niup++;
+ else if (level < aniState->noiseImmunityLevel)
+ ah->stats.ast_ani_nidown++;
+ aniState->noiseImmunityLevel = level;
+ break;
+ }
+ case ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION:{
+ const int m1ThreshLow[] = { 127, 50 };
+ const int m2ThreshLow[] = { 127, 40 };
+ const int m1Thresh[] = { 127, 0x4d };
+ const int m2Thresh[] = { 127, 0x40 };
+ const int m2CountThr[] = { 31, 16 };
+ const int m2CountThrLow[] = { 63, 48 };
+ u32 on = param ? 1 : 0;
+
+ REG_RMW_FIELD(ah, AR_PHY_SFCORR_LOW,
+ AR_PHY_SFCORR_LOW_M1_THRESH_LOW,
+ m1ThreshLow[on]);
+ REG_RMW_FIELD(ah, AR_PHY_SFCORR_LOW,
+ AR_PHY_SFCORR_LOW_M2_THRESH_LOW,
+ m2ThreshLow[on]);
+ REG_RMW_FIELD(ah, AR_PHY_SFCORR,
+ AR_PHY_SFCORR_M1_THRESH,
+ m1Thresh[on]);
+ REG_RMW_FIELD(ah, AR_PHY_SFCORR,
+ AR_PHY_SFCORR_M2_THRESH,
+ m2Thresh[on]);
+ REG_RMW_FIELD(ah, AR_PHY_SFCORR,
+ AR_PHY_SFCORR_M2COUNT_THR,
+ m2CountThr[on]);
+ REG_RMW_FIELD(ah, AR_PHY_SFCORR_LOW,
+ AR_PHY_SFCORR_LOW_M2COUNT_THR_LOW,
+ m2CountThrLow[on]);
+
+ REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT,
+ AR_PHY_SFCORR_EXT_M1_THRESH_LOW,
+ m1ThreshLow[on]);
+ REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT,
+ AR_PHY_SFCORR_EXT_M2_THRESH_LOW,
+ m2ThreshLow[on]);
+ REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT,
+ AR_PHY_SFCORR_EXT_M1_THRESH,
+ m1Thresh[on]);
+ REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT,
+ AR_PHY_SFCORR_EXT_M2_THRESH,
+ m2Thresh[on]);
+
+ if (on)
+ REG_SET_BIT(ah, AR_PHY_SFCORR_LOW,
+ AR_PHY_SFCORR_LOW_USE_SELF_CORR_LOW);
+ else
+ REG_CLR_BIT(ah, AR_PHY_SFCORR_LOW,
+ AR_PHY_SFCORR_LOW_USE_SELF_CORR_LOW);
+
+ if (!on != aniState->ofdmWeakSigDetectOff) {
+ if (on)
+ ah->stats.ast_ani_ofdmon++;
+ else
+ ah->stats.ast_ani_ofdmoff++;
+ aniState->ofdmWeakSigDetectOff = !on;
+ }
+ break;
+ }
+ case ATH9K_ANI_CCK_WEAK_SIGNAL_THR:{
+ const int weakSigThrCck[] = { 8, 6 };
+ u32 high = param ? 1 : 0;
+
+ REG_RMW_FIELD(ah, AR_PHY_CCK_DETECT,
+ AR_PHY_CCK_DETECT_WEAK_SIG_THR_CCK,
+ weakSigThrCck[high]);
+ if (high != aniState->cckWeakSigThreshold) {
+ if (high)
+ ah->stats.ast_ani_cckhigh++;
+ else
+ ah->stats.ast_ani_ccklow++;
+ aniState->cckWeakSigThreshold = high;
+ }
+ break;
+ }
+ case ATH9K_ANI_FIRSTEP_LEVEL:{
+ const int firstep[] = { 0, 4, 8 };
+ u32 level = param;
+
+ if (level >= ARRAY_SIZE(firstep)) {
+ ath_print(common, ATH_DBG_ANI,
+ "level out of range (%u > %u)\n",
+ level,
+ (unsigned) ARRAY_SIZE(firstep));
+ return false;
+ }
+ REG_RMW_FIELD(ah, AR_PHY_FIND_SIG,
+ AR_PHY_FIND_SIG_FIRSTEP,
+ firstep[level]);
+ if (level > aniState->firstepLevel)
+ ah->stats.ast_ani_stepup++;
+ else if (level < aniState->firstepLevel)
+ ah->stats.ast_ani_stepdown++;
+ aniState->firstepLevel = level;
+ break;
+ }
+ case ATH9K_ANI_SPUR_IMMUNITY_LEVEL:{
+ const int cycpwrThr1[] = { 2, 4, 6, 8, 10, 12, 14, 16 };
+ u32 level = param;
+
+ if (level >= ARRAY_SIZE(cycpwrThr1)) {
+ ath_print(common, ATH_DBG_ANI,
+ "level out of range (%u > %u)\n",
+ level,
+ (unsigned) ARRAY_SIZE(cycpwrThr1));
+ return false;
+ }
+ REG_RMW_FIELD(ah, AR_PHY_TIMING5,
+ AR_PHY_TIMING5_CYCPWR_THR1,
+ cycpwrThr1[level]);
+ if (level > aniState->spurImmunityLevel)
+ ah->stats.ast_ani_spurup++;
+ else if (level < aniState->spurImmunityLevel)
+ ah->stats.ast_ani_spurdown++;
+ aniState->spurImmunityLevel = level;
+ break;
+ }
+ case ATH9K_ANI_PRESENT:
+ break;
+ default:
+ ath_print(common, ATH_DBG_ANI,
+ "invalid cmd %u\n", cmd);
+ return false;
+ }
+
+ ath_print(common, ATH_DBG_ANI, "ANI parameters:\n");
+ ath_print(common, ATH_DBG_ANI,
+ "noiseImmunityLevel=%d, spurImmunityLevel=%d, "
+ "ofdmWeakSigDetectOff=%d\n",
+ aniState->noiseImmunityLevel,
+ aniState->spurImmunityLevel,
+ !aniState->ofdmWeakSigDetectOff);
+ ath_print(common, ATH_DBG_ANI,
+ "cckWeakSigThreshold=%d, "
+ "firstepLevel=%d, listenTime=%d\n",
+ aniState->cckWeakSigThreshold,
+ aniState->firstepLevel,
+ aniState->listenTime);
+ ath_print(common, ATH_DBG_ANI,
+ "cycleCount=%d, ofdmPhyErrCount=%d, cckPhyErrCount=%d\n\n",
+ aniState->cycleCount,
+ aniState->ofdmPhyErrCount,
+ aniState->cckPhyErrCount);
+
+ return true;
+}
+
void ar5008_hw_attach_phy_ops(struct ath_hw *ah)
{
struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah);
@@ -1036,6 +1219,7 @@ void ar5008_hw_attach_phy_ops(struct ath_hw *ah)
priv_ops->enable_rfkill = ar5008_hw_enable_rfkill;
priv_ops->restore_chainmask = ar5008_restore_chainmask;
priv_ops->set_diversity = ar5008_set_diversity;
+ priv_ops->ani_control = ar5008_hw_ani_control;
if (AR_SREV_9100(ah))
priv_ops->compute_pll_control = ar9100_hw_compute_pll_control;
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index acbf122..356e03d 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -420,6 +420,13 @@ static void ar9003_hw_set_diversity(struct ath_hw *ah, bool value)
/* TODO */
}
+static bool ar9003_hw_ani_control(struct ath_hw *ah,
+ enum ath9k_ani_cmd cmd, int param)
+{
+ /* TODO */
+ return false;
+}
+
void ar9003_hw_attach_phy_ops(struct ath_hw *ah)
{
struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah);
@@ -437,4 +444,5 @@ void ar9003_hw_attach_phy_ops(struct ath_hw *ah)
priv_ops->rfbus_done = ar9003_hw_rfbus_done;
priv_ops->enable_rfkill = ar9003_hw_enable_rfkill;
priv_ops->set_diversity = ar9003_hw_set_diversity;
+ priv_ops->ani_control = ar9003_hw_ani_control;
}
diff --git a/drivers/net/wireless/ath/ath9k/hw-ops.h b/drivers/net/wireless/ath/ath9k/hw-ops.h
index 19259fb..08a51a2 100644
--- a/drivers/net/wireless/ath/ath9k/hw-ops.h
+++ b/drivers/net/wireless/ath/ath9k/hw-ops.h
@@ -146,4 +146,10 @@ static inline void ath9k_hw_set_diversity(struct ath_hw *ah, bool value)
return ath9k_hw_private_ops(ah)->set_diversity(ah, value);
}
+static inline bool ath9k_hw_ani_control(struct ath_hw *ah,
+ enum ath9k_ani_cmd cmd, int param)
+{
+ return ath9k_hw_private_ops(ah)->ani_control(ah, cmd, param);
+}
+
#endif /* ATH9K_HW_OPS_H */
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index c3928be..b0cfc77 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -508,6 +508,8 @@ struct ath_hw_private_ops {
void (*set_diversity)(struct ath_hw *ah, bool value);
u32 (*compute_pll_control)(struct ath_hw *ah,
struct ath9k_channel *chan);
+ bool (*ani_control)(struct ath_hw *ah, enum ath9k_ani_cmd cmd,
+ int param);
};
/**
--
1.6.3.3
next prev parent reply other threads:[~2010-04-15 21:39 UTC|newest]
Thread overview: 103+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-04-15 21:38 [PATCH v3 00/97] ath9k: add AR9003 support Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 01/97] ath9k_hw: start building an abstraction layer for hardware routines Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 02/97] ath9k_hw: add silicon revision macros for AR9300 Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 03/97] ath9k_hw: add a macro for abstracting generic timer access Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 04/97] ath9k_hw: fix a missing hex prefix for a register mask Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 05/97] ath9k_hw: add simple register abstraction for some AR9300 registers Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 06/97] ath9k_hw: add support for GPIO differences on AR9003 Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 07/97] ath9k_hw: AR9003 does not have AR_RC_AHB skip its setting Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 08/97] ath9k_hw: remove wrapper ath9k_hw_write_regs() Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 09/97] ath9k_hw: Move some RF ops to the private callbacks Luis R. Rodriguez
2010-04-16 19:43 ` John W. Linville
2010-04-16 19:56 ` Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 10/97] ath9k_hw: skip PLL initialization on AR9003 on Power-On-Reset Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 11/97] ath9k_hw: add some comments for ath9k_set_power_network_sleep() Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 12/97] ath9k_hw: add a private callback for PLL control computation Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 13/97] ath9k_hw: Add the PCI IDs for AR9300 and fill up the pci_id_tables Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 14/97] ath9k_hw: Add AR9003 PHY support Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 15/97] ath9k_hw: move init config and default after chip is up Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 16/97] ath9k_hw: add the AR9003 ar9003_hw_macversion_supported() Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 17/97] ath9k_hw: disable ANI for AR9003 Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 18/97] ath9k: disable the MIB interrupt if ANI is disabled Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 19/97] ath9k_hw: Add hw cap flag for EDMA for the AR9003 family Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 20/97] ath9k_hw: Fill few hw cap for edma Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 21/97] ath9k_hw: Add abstraction for rx enable Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 22/97] ath9k_hw: Fill rx_enable() for the AR9003 hardware family Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 23/97] ath9k_hw: Add few routines for rx edma support Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 24/97] ath9k_hw: update the chip tests for AR9003 Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 25/97] ath9k_hw: prevent reset control register zeroing on AR9003 reset Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 26/97] ath9k_hw: Add AR9003 PHY register definitions Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 27/97] ath9k_hw: add common channel select helpers for ar900[23] Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 28/97] ath9k_hw: Set the channel on AR9003 Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 29/97] ath9k_hw: Implement PLL control " Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 30/97] ath9k_hw: Implement spur mitigation " Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 31/97] ath9k_hw: split initvals.h by hardware family Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 32/97] ath9k_hw: add initvals for the AR9003 " Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 33/97] ath9k_hw: add helpers for processing the AR9003 INI Luis R. Rodriguez
2010-04-15 21:38 ` Luis R. Rodriguez [this message]
2010-04-15 21:38 ` [PATCH v3 35/97] ath9k_hw: add all the AR9003 PHY callbacks Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 36/97] ath9k_hw: Define tx control struct for AR9003 Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 37/97] ath9k_hw: Move code which populates ds_data to ath9k_hw Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 38/97] ath9k_hw: Add abstraction to set/get link pointer Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 39/97] ath9k: Use abstraction to get " Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 40/97] ath9k: Use memcpy in ath_clone_txbuf() Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 41/97] ath9k: Remove ATH9K_TX_SW_ABORTED and introduce a bool for this purpose Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 42/97] ath9k: Make bf_desc of ath_buf opaque Luis R. Rodriguez
2010-04-16 22:00 ` Pavel Roskin
2010-04-16 22:09 ` Felix Fietkau
2010-04-19 15:53 ` Pavel Roskin
2010-04-15 21:38 ` [PATCH v3 43/97] ath9k: Add Rx EDMA support Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 44/97] ath9k_hw: Split out the function for reading the noise floor Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 45/97] ath9k_hw: the eep_map is used only for AR9280 PCI card ini fixup Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 46/97] ath9k_hw: add a helper for Power Amplifier calibration for AR9002 Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 47/97] ath9k_hw: add a helper for the OLC tem compensation " Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 48/97] ath9k_hw: rename PA calib for AR9287 Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 49/97] ath9k_hw: shift code for AR9280 OLC temp comp Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 50/97] ath9k_hw: move the AR9280 OLC temp comp to its own helper Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 51/97] ath9k_hw: simplify OLC temp compensation for AR9002 Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 52/97] ath9k_hw: rename the PA calib routines to match their families Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 53/97] ath9k_hw: rename getNoiseFloorThresh() to ath9k_hw_loadnf() Luis R. Rodriguez
2010-04-15 21:38 ` [PATCH v3 54/97] ath9k_hw: move the cal AR9100 calibration settings Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 55/97] ath9k_hw: split calib code by hardware families Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 56/97] ath9k_hw: add the AR9003 ar9003_hw_init_cal callback Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 57/97] ath9k_hw: add the config_pci_powersave AR9003 callback Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 58/97] ath9k_hw: split the generic hardware code by hardware family Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 59/97] ath9k_hw: move the cck channel 14 INI to the AR9002 hw code Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 60/97] ath9k_hw: move TX/RX gain INI stuff to its own hardware family code Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 61/97] ath9k_hw: Abstract the routine which returns interrupt status Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 62/97] ath9k_hw: Initialize interrupt mask for AR9003 Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 63/97] ath9k_hw: abstract the AR_PHY_AGC_CONTROL register access Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 64/97] ath9k_hw: abstract loading noisefloor Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 65/97] ath9k_hw: fill in the callbacks for calibration for AR9003 Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 66/97] ath9k_hw: complete AR9003 calibration Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 67/97] ath9k_hw: rename eep_AR9287_ops to eep_ar9287_ops Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 68/97] ath9k_hw: restore mac address reading logic Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 69/97] ath9k_hw: Implement AR9003 eeprom callbacks Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 70/97] ath9k_hw: add OFDM spur mitigation for AR9003 Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 71/97] ath9k_hw: Fill get_isr() " Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 72/97] ath9k_hw: move AR9280 PCI EEPROM fix to eeprom_def.c Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 73/97] ath9k_hw: move the RF claim stuff to AR9002 hardware family Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 74/97] ath9k_hw: Configure Tx interrupt mitigation timer Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 75/97] ath9k_hw: add the AR9300 SREV hw name print Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 76/97] ath9k_hw: add TX/RX gain register initialization for AR9003 Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 77/97] ath9k_hw: Update ath9k_hw_set_dma for AR9300 Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 78/97] ath9k_hw: skip asynch fifo enablement to AR9003 Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 79/97] ath9k_hw: skip WEP aggregation enable code for AR9003 Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 80/97] ath9k: Load SW filtered NF values and start NF cal during full reset " Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 81/97] ath9k_hw: Define abstraction for tx desc access Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 82/97] ath9k_hw: Add function to configure tx status ring buffer Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 83/97] ath9k_hw: move AR9002 mac ops to its own file Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 84/97] ath9k_hw: Fill descriptor abstrations for AR9003 Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 85/97] ath9k: add RXLP and RXHP to debugfs counters Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 86/97] ath9k_hw: enable CRC check of descriptors for AR9003 Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 87/97] ath9k_hw: set cwmin and cwmax to 0 for for AR9003 upon txq reset Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 88/97] ath9k: Setup appropriate tx desc for regular dma and edma Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 89/97] ath9k: Initialize and configure tx status for EDMA Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 90/97] ath9k_hw: Compute pointer checksum over the link descriptor Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 91/97] ath9k: Add Tx EDMA support Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 92/97] mac80211: add LDPC control flag Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 93/97] ath9k_hw: add LDPC support for AR9003 Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 94/97] ath9k: add LDPC support Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 95/97] ath9k: Enable TXOK and TXERR interrupts for TX EDMA Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 96/97] ath9k_hw: Abort rx if hw is not coming out of full sleep in reset Luis R. Rodriguez
2010-04-15 21:39 ` [PATCH v3 97/97] ath9k_hw: add the PCI ID for the first AR9300 device Luis R. Rodriguez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1271367582-992-35-git-send-email-lrodriguez@atheros.com \
--to=lrodriguez@atheros.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=nbd@openwrt.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).