From: Amitkumar Karwar <akarwar@marvell.com>
To: <linux-wireless@vger.kernel.org>
Cc: Cathy Luo <cluo@marvell.com>,
Nishant Sarmukadam <nishants@marvell.com>,
Ganapathi Bhat <gbhat@marvell.com>,
Amitkumar Karwar <akarwar@marvell.com>
Subject: [PATCH 4/9] mwifiex: support random MAC address for scanning
Date: Mon, 11 Jul 2016 20:23:47 +0530 [thread overview]
Message-ID: <1468248832-21969-5-git-send-email-akarwar@marvell.com> (raw)
In-Reply-To: <1468248832-21969-1-git-send-email-akarwar@marvell.com>
From: Ganapathi Bhat <gbhat@marvell.com>
This patch advertises RANDOM_MAC_ADDR feature to cfg80211. It allow the
application to issue scan with a MAC address and mask. Random MACs are
generated and used in probe requests sent for scanning until it is changed
by the application or device is restarted.
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
---
drivers/net/wireless/marvell/mwifiex/cfg80211.c | 15 ++++++++++++++-
drivers/net/wireless/marvell/mwifiex/fw.h | 7 +++++++
drivers/net/wireless/marvell/mwifiex/main.h | 1 +
drivers/net/wireless/marvell/mwifiex/scan.c | 16 ++++++++++++++++
4 files changed, 38 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/marvell/mwifiex/cfg80211.c b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
index 867ab81..8955f8c 100644
--- a/drivers/net/wireless/marvell/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
@@ -2483,6 +2483,16 @@ mwifiex_cfg80211_scan(struct wiphy *wiphy,
priv->scan_request = request;
+ if (request->flags & NL80211_SCAN_FLAG_RANDOM_ADDR) {
+ ether_addr_copy(priv->random_mac, request->mac_addr);
+ for (i = 0; i < ETH_ALEN; i++) {
+ priv->random_mac[i] &= request->mac_addr_mask[i];
+ priv->random_mac[i] |= get_random_int() &
+ ~(request->mac_addr_mask[i]);
+ }
+ }
+
+ ether_addr_copy(user_scan_cfg->random_mac, priv->random_mac);
user_scan_cfg->num_ssids = request->n_ssids;
user_scan_cfg->ssid_list = request->ssids;
@@ -4171,7 +4181,10 @@ int mwifiex_register_cfg80211(struct mwifiex_adapter *adapter)
wiphy->features |= NL80211_FEATURE_HT_IBSS |
NL80211_FEATURE_INACTIVITY_TIMER |
NL80211_FEATURE_LOW_PRIORITY_SCAN |
- NL80211_FEATURE_NEED_OBSS_SCAN;
+ NL80211_FEATURE_NEED_OBSS_SCAN |
+ NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR |
+ NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR |
+ NL80211_FEATURE_ND_RANDOM_MAC_ADDR;
if (ISSUPP_TDLS_ENABLED(adapter->fw_cap_info))
wiphy->features |= NL80211_FEATURE_TDLS_CHANNEL_SWITCH;
diff --git a/drivers/net/wireless/marvell/mwifiex/fw.h b/drivers/net/wireless/marvell/mwifiex/fw.h
index c46267b..3797ef4 100644
--- a/drivers/net/wireless/marvell/mwifiex/fw.h
+++ b/drivers/net/wireless/marvell/mwifiex/fw.h
@@ -188,6 +188,7 @@ enum MWIFIEX_802_11_PRIVACY_FILTER {
#define TLV_BTCOEX_WL_AGGR_WINSIZE (PROPRIETARY_TLV_BASE_ID + 202)
#define TLV_BTCOEX_WL_SCANTIME (PROPRIETARY_TLV_BASE_ID + 203)
#define TLV_TYPE_BSS_MODE (PROPRIETARY_TLV_BASE_ID + 206)
+#define TLV_TYPE_RANDOM_MAC (PROPRIETARY_TLV_BASE_ID + 236)
#define MWIFIEX_TX_DATA_BUF_SIZE_2K 2048
@@ -780,6 +781,11 @@ struct mwifiex_ie_types_scan_chan_gap {
__le16 chan_gap;
} __packed;
+struct mwifiex_ie_types_random_mac {
+ struct mwifiex_ie_types_header header;
+ u8 mac[ETH_ALEN];
+} __packed;
+
struct mwifiex_ietypes_chanstats {
struct mwifiex_ie_types_header header;
struct mwifiex_fw_chan_stats chanstats[0];
@@ -1464,6 +1470,7 @@ struct mwifiex_user_scan_cfg {
/* Variable number (fixed maximum) of channels to scan up */
struct mwifiex_user_scan_chan chan_list[MWIFIEX_USER_SCAN_CHAN_MAX];
u16 scan_chan_gap;
+ u8 random_mac[ETH_ALEN];
} __packed;
#define MWIFIEX_BG_SCAN_CHAN_MAX 38
diff --git a/drivers/net/wireless/marvell/mwifiex/main.h b/drivers/net/wireless/marvell/mwifiex/main.h
index 9f6bb40..5902600 100644
--- a/drivers/net/wireless/marvell/mwifiex/main.h
+++ b/drivers/net/wireless/marvell/mwifiex/main.h
@@ -675,6 +675,7 @@ struct mwifiex_private {
struct mwifiex_user_scan_chan hidden_chan[MWIFIEX_USER_SCAN_CHAN_MAX];
u8 assoc_resp_ht_param;
bool ht_param_present;
+ u8 random_mac[ETH_ALEN];
};
diff --git a/drivers/net/wireless/marvell/mwifiex/scan.c b/drivers/net/wireless/marvell/mwifiex/scan.c
index 87e7000..ed252d8 100644
--- a/drivers/net/wireless/marvell/mwifiex/scan.c
+++ b/drivers/net/wireless/marvell/mwifiex/scan.c
@@ -820,6 +820,7 @@ mwifiex_config_scan(struct mwifiex_private *priv,
struct mwifiex_adapter *adapter = priv->adapter;
struct mwifiex_ie_types_num_probes *num_probes_tlv;
struct mwifiex_ie_types_scan_chan_gap *chan_gap_tlv;
+ struct mwifiex_ie_types_random_mac *random_mac_tlv;
struct mwifiex_ie_types_wildcard_ssid_params *wildcard_ssid_tlv;
struct mwifiex_ie_types_bssid_list *bssid_tlv;
u8 *tlv_pos;
@@ -835,6 +836,7 @@ mwifiex_config_scan(struct mwifiex_private *priv,
u8 ssid_filter;
struct mwifiex_ie_types_htcap *ht_cap;
struct mwifiex_ie_types_bss_mode *bss_mode;
+ const u8 zero_mac[6] = {0, 0, 0, 0, 0, 0};
/* The tlv_buf_len is calculated for each scan command. The TLVs added
in this routine will be preserved since the routine that sends the
@@ -967,6 +969,18 @@ mwifiex_config_scan(struct mwifiex_private *priv,
tlv_pos +=
sizeof(struct mwifiex_ie_types_scan_chan_gap);
}
+
+ if (!ether_addr_equal(user_scan_in->random_mac, zero_mac)) {
+ random_mac_tlv = (void *)tlv_pos;
+ random_mac_tlv->header.type =
+ cpu_to_le16(TLV_TYPE_RANDOM_MAC);
+ random_mac_tlv->header.len =
+ cpu_to_le16(sizeof(random_mac_tlv->mac));
+ ether_addr_copy(random_mac_tlv->mac,
+ user_scan_in->random_mac);
+ tlv_pos +=
+ sizeof(struct mwifiex_ie_types_random_mac);
+ }
} else {
scan_cfg_out->bss_mode = (u8) adapter->scan_mode;
num_probes = adapter->scan_probes;
@@ -1922,6 +1936,7 @@ mwifiex_active_scan_req_for_passive_chan(struct mwifiex_private *priv)
}
adapter->active_scan_triggered = true;
+ ether_addr_copy(user_scan_cfg->random_mac, priv->random_mac);
user_scan_cfg->num_ssids = priv->scan_request->n_ssids;
user_scan_cfg->ssid_list = priv->scan_request->ssids;
@@ -2749,6 +2764,7 @@ static int mwifiex_scan_specific_ssid(struct mwifiex_private *priv,
if (!scan_cfg)
return -ENOMEM;
+ ether_addr_copy(scan_cfg->random_mac, priv->random_mac);
scan_cfg->ssid_list = req_ssid;
scan_cfg->num_ssids = 1;
--
1.9.1
next prev parent reply other threads:[~2016-07-11 15:01 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-11 14:53 [PATCH 0/9] mwifiex patches Amitkumar Karwar
2016-07-11 14:53 ` [PATCH 1/9] mwifiex: Fixed endianness problem for big endian platform Amitkumar Karwar
2016-07-11 14:53 ` [PATCH 2/9] mwifiex: add region code information in debugfs Amitkumar Karwar
2016-07-11 14:53 ` [PATCH 3/9] mwifiex: fix failed to reconnect after interface disabled/enabled Amitkumar Karwar
2016-07-11 14:53 ` Amitkumar Karwar [this message]
2016-07-11 14:53 ` [PATCH 5/9] mwifiex: cfg80211 set_default_mgmt_key handler Amitkumar Karwar
2016-07-18 17:19 ` Kalle Valo
2016-07-21 9:18 ` Amitkumar Karwar
2016-07-21 15:51 ` Jouni Malinen
2016-07-22 15:59 ` Amitkumar Karwar
2016-07-22 16:55 ` Jouni Malinen
2016-07-25 9:33 ` Amitkumar Karwar
2016-07-26 15:12 ` Kalle Valo
2016-07-11 14:53 ` [PATCH 6/9] mwifiex: process rxba_sync event Amitkumar Karwar
2016-07-18 17:24 ` Kalle Valo
2016-07-21 9:48 ` Amitkumar Karwar
2016-07-11 14:53 ` [PATCH 7/9] mwifiex: remove misleading disconnect message Amitkumar Karwar
2016-07-11 14:53 ` [PATCH 8/9] mwifiex: add HT aggregation support for adhoc mode Amitkumar Karwar
2016-07-11 14:53 ` [PATCH 9/9] mwifiex: fix radar detection issue Amitkumar Karwar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1468248832-21969-5-git-send-email-akarwar@marvell.com \
--to=akarwar@marvell.com \
--cc=cluo@marvell.com \
--cc=gbhat@marvell.com \
--cc=linux-wireless@vger.kernel.org \
--cc=nishants@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).