linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH 1/2] brcmfmac: modify __brcmf_err() to take bus as a parameter
@ 2019-01-15  6:19 Rafał Miłecki
  2019-01-15  6:20 ` [PATCH 2/2] brcmfmac: pass bus to the __brcmf_err() in cfg80211.c Rafał Miłecki
                   ` (3 more replies)
  0 siblings, 4 replies; 12+ messages in thread
From: Rafał Miłecki @ 2019-01-15  6:19 UTC (permalink / raw)
  To: Kalle Valo
  Cc: Arend van Spriel, linux-wireless, brcm80211-dev-list.pdl,
	brcm80211-dev-list, Rafał Miłecki

From: Rafał Miłecki <rafal@milecki.pl>

So far __brcmf_err() was using pr_err() which didn't allow identifying
device that was affected by an error. It's crucial for systems with more
than 1 device supported by brcmfmac (a common case for home routers).

This change allows passing struct brcmf_bus to the __brcmf_err(). That
struct has been agreed to be the most common one. It allows accessing
struct device easily & using dev_err() printing helper.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
This is my another try on improving brcmf_err after the failure from 2
years ago:
[PATCH V3 4/9] brcmfmac: add struct brcmf_pub parameter to the __brcmf_err
https://patchwork.kernel.org/patch/9553255/

Back then my change has been rejected due to miscommunication and late
realisation that struct brcmf_pub (a previous choice instead of struct
brcmf_bus) was a bad idea. Back then Arend wrote:
> So I would think using struct brcmf_bus in brcmf_err() would be best
> fit.

So this patch follows that suggestion & updates __brcmf_err()
accordingly.
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c | 7 +++++--
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h  | 8 +++++---
 .../net/wireless/broadcom/brcm80211/brcmfmac/tracepoint.c | 7 +++++--
 3 files changed, 15 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
index 0ce1d8174e6d..c62009a06617 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
@@ -350,7 +350,7 @@ int brcmf_c_preinit_dcmds(struct brcmf_if *ifp)
 }
 
 #ifndef CONFIG_BRCM_TRACING
-void __brcmf_err(const char *func, const char *fmt, ...)
+void __brcmf_err(struct brcmf_bus *bus, const char *func, const char *fmt, ...)
 {
 	struct va_format vaf;
 	va_list args;
@@ -359,7 +359,10 @@ void __brcmf_err(const char *func, const char *fmt, ...)
 
 	vaf.fmt = fmt;
 	vaf.va = &args;
-	pr_err("%s: %pV", func, &vaf);
+	if (bus)
+		dev_err(bus->dev, "%s: %pV", func, &vaf);
+	else
+		pr_err("%s: %pV", func, &vaf);
 
 	va_end(args);
 }
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h
index cfed0626bf5a..b499f90d94f6 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h
@@ -45,8 +45,10 @@
 #undef pr_fmt
 #define pr_fmt(fmt)		KBUILD_MODNAME ": " fmt
 
-__printf(2, 3)
-void __brcmf_err(const char *func, const char *fmt, ...);
+struct brcmf_bus;
+
+__printf(3, 4)
+void __brcmf_err(struct brcmf_bus *bus, const char *func, const char *fmt, ...);
 /* Macro for error messages. When debugging / tracing the driver all error
  * messages are important to us.
  */
@@ -55,7 +57,7 @@ void __brcmf_err(const char *func, const char *fmt, ...);
 		if (IS_ENABLED(CONFIG_BRCMDBG) ||			\
 		    IS_ENABLED(CONFIG_BRCM_TRACING) ||			\
 		    net_ratelimit())					\
-			__brcmf_err(__func__, fmt, ##__VA_ARGS__);	\
+			__brcmf_err(NULL, __func__, fmt, ##__VA_ARGS__);\
 	} while (0)
 
 #if defined(DEBUG) || defined(CONFIG_BRCM_TRACING)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/tracepoint.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/tracepoint.c
index fe6755944b7b..f9359ea9cb13 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/tracepoint.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/tracepoint.c
@@ -21,7 +21,7 @@
 #include "tracepoint.h"
 #include "debug.h"
 
-void __brcmf_err(const char *func, const char *fmt, ...)
+void __brcmf_err(struct brcmf_bus *bus, const char *func, const char *fmt, ...)
 {
 	struct va_format vaf = {
 		.fmt = fmt,
@@ -30,7 +30,10 @@ void __brcmf_err(const char *func, const char *fmt, ...)
 
 	va_start(args, fmt);
 	vaf.va = &args;
-	pr_err("%s: %pV", func, &vaf);
+	if (bus)
+		dev_err(bus->dev, "%s: %pV", func, &vaf);
+	else
+		pr_err("%s: %pV", func, &vaf);
 	trace_brcmf_err(func, &vaf);
 	va_end(args);
 }
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 12+ messages in thread

end of thread, other threads:[~2019-02-01 17:07 UTC | newest]

Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-01-15  6:19 [PATCH 1/2] brcmfmac: modify __brcmf_err() to take bus as a parameter Rafał Miłecki
2019-01-15  6:20 ` [PATCH 2/2] brcmfmac: pass bus to the __brcmf_err() in cfg80211.c Rafał Miłecki
2019-01-15  9:08   ` Arend Van Spriel
2019-01-15 11:09   ` kbuild test robot
2019-01-15  8:48 ` [PATCH 1/2] brcmfmac: modify __brcmf_err() to take bus as a parameter Arend Van Spriel
2019-01-15 11:59   ` Rafał Miłecki
2019-01-15 11:42 ` kbuild test robot
2019-01-15 12:12 ` [PATCH V2 " Rafał Miłecki
2019-01-15 12:12   ` [PATCH V2 2/2] brcmfmac: pass bus to the __brcmf_err() in pcie.c Rafał Miłecki
2019-02-01 12:14   ` [PATCH V2 1/2] brcmfmac: modify __brcmf_err() to take bus as a parameter Kalle Valo
     [not found]   ` <20190201121417.56DC66085C@smtp.codeaurora.org>
2019-02-01 15:51     ` Rafał Miłecki
2019-02-01 16:46       ` Kalle Valo

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).