From: Wei Yang <weiyang@linux.vnet.ibm.com>
To: Gavin Shan <gwshan@linux.vnet.ibm.com>
Cc: bhelgaas@google.com, linux-pci@vger.kernel.org,
Wei Yang <weiyang@linux.vnet.ibm.com>,
linuxppc-dev@lists.ozlabs.org
Subject: Re: [PATCH V3 2/9] powerpc/pci_dn: cache vf_index in pci_dn
Date: Tue, 12 May 2015 15:29:17 +0800 [thread overview]
Message-ID: <20150512072917.GA16788@richard> (raw)
In-Reply-To: <20150512061558.GA18734@gwshan>
On Tue, May 12, 2015 at 04:15:58PM +1000, Gavin Shan wrote:
>On Mon, May 11, 2015 at 01:54:12PM +0800, Wei Yang wrote:
>>On Mon, May 11, 2015 at 12:21:04PM +1000, Gavin Shan wrote:
>>>On Mon, May 04, 2015 at 03:07:31PM +0800, Wei Yang wrote:
>>>>This patch caches the index of a VF in its PF in pci_dn.
>>>>
>>>
>>>At least you can mention the purpose of vf_index to make the commit log
>>>complete. The following message looks better?
>>>
>>>The patch caches the VF index in pci_dn, which can be used to calculate
>>>VF's bus, device and function number. Those information helps to locate
>>>the VF's PCI device instance when doing hotplug during EEH recovery if
>>>necessary.
>>>
>>
>>Thanks, looks better. I added it in the log.
>>
>>>>Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
>>>>---
>>>> arch/powerpc/include/asm/pci-bridge.h | 1 +
>>>> arch/powerpc/kernel/pci_dn.c | 5 +++--
>>>> 2 files changed, 4 insertions(+), 2 deletions(-)
>>>>
>>>>diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
>>>>index 1811c44..9582aa2 100644
>>>>--- a/arch/powerpc/include/asm/pci-bridge.h
>>>>+++ b/arch/powerpc/include/asm/pci-bridge.h
>>>>@@ -199,6 +199,7 @@ struct pci_dn {
>>>> #ifdef CONFIG_PCI_IOV
>>>> u16 vfs_expanded; /* number of VFs IOV BAR expanded */
>>>> u16 num_vfs; /* number of VFs enabled*/
>>>>+ int vf_index; /* Index to PF for VF dev */
>>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^
>>>
>>> /* VF index in the PF */
>>
>>Ok, changed in the code.
>>
>>>
>>>And I believe it can be "unsigned int", or u16. We should have
>>>non-negative vf_index, no?
>>
>>Take a look in the virtfn_add(), the index in drivers/pci/iov.c is int. So I
>>copy that.
>>
>>>
>>>> int offset; /* PE# for the first VF PE */
>>>> #define M64_PER_IOV 4
>>>> int m64_per_iov;
>>>>diff --git a/arch/powerpc/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c
>>>>index b3b4df9..bf0fb873 100644
>>>>--- a/arch/powerpc/kernel/pci_dn.c
>>>>+++ b/arch/powerpc/kernel/pci_dn.c
>>>>@@ -138,7 +138,7 @@ struct pci_dn *pci_get_pdn(struct pci_dev *pdev)
>>>>
>>>> #ifdef CONFIG_PCI_IOV
>>>> static struct pci_dn *add_one_dev_pci_data(struct pci_dn *parent,
>>>>- struct pci_dev *pdev,
>>>>+ struct pci_dev *pdev, int vf_index,
>>>
>>> struct pci_dev *pdev,
>>> int vf_index;
>>
>>Some reason for this comment?
>>
>>That does not exceed 80 characters.
>>
>
>No, it doesn't exceed 80 characters as you said. You take one of the following
>formats, not the one you're using:
>
>add_one_dev_pci_data(foo1, foo2, add_one_dev_pci_data(foo1,
> foo3, foo4, foo2,
> foo5, foo6); :
> foo6);
>
Thanks
>>>> int busno, int devfn)
>>>> {
>>>> struct pci_dn *pdn;
>>>>@@ -157,6 +157,7 @@ static struct pci_dn *add_one_dev_pci_data(struct pci_dn *parent,
>>>> pdn->parent = parent;
>>>> pdn->busno = busno;
>>>> pdn->devfn = devfn;
>>>>+ pdn->vf_index = vf_index;
>>>> #ifdef CONFIG_PPC_POWERNV
>>>> pdn->pe_number = IODA_INVALID_PE;
>>>> #endif
>>>>@@ -196,7 +197,7 @@ struct pci_dn *add_dev_pci_data(struct pci_dev *pdev)
>>>> return NULL;
>>>>
>>>> for (i = 0; i < pci_sriov_get_totalvfs(pdev); i++) {
>>>>- pdn = add_one_dev_pci_data(parent, NULL,
>>>>+ pdn = add_one_dev_pci_data(parent, NULL, i,
>>>> pci_iov_virtfn_bus(pdev, i),
>>>> pci_iov_virtfn_devfn(pdev, i));
>>>> if (!pdn) {
>
>Thanks,
>Gavin
--
Richard Yang
Help you, Help me
next prev parent reply other threads:[~2015-05-12 7:30 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-04 7:07 [PATCH V3 0/9] VF EEH on Power8 Wei Yang
2015-05-04 7:07 ` [PATCH V3 1/9] pci/iov: rename and export virtfn_add/virtfn_remove Wei Yang
2015-05-11 2:13 ` Gavin Shan
2015-05-04 7:07 ` [PATCH V3 2/9] powerpc/pci_dn: cache vf_index in pci_dn Wei Yang
2015-05-11 2:21 ` Gavin Shan
2015-05-11 5:54 ` Wei Yang
2015-05-12 6:15 ` Gavin Shan
2015-05-12 7:29 ` Wei Yang [this message]
2015-05-04 7:07 ` [PATCH V3 3/9] powerpc/pci: remove PCI devices in reverse order Wei Yang
2015-05-04 7:07 ` [PATCH V3 4/9] powerpc/eeh: cache address range just for normal device Wei Yang
2015-05-04 7:07 ` [PATCH V3 5/9] powerpc/eeh: create EEH_PE_VF for VF PE Wei Yang
2015-05-11 2:37 ` Gavin Shan
2015-05-11 6:25 ` Wei Yang
2015-05-12 6:28 ` Gavin Shan
2015-05-12 7:52 ` Wei Yang
2015-05-04 7:07 ` [PATCH V3 6/9] powerpc/powernv: create/release eeh_dev for VF Wei Yang
2015-05-11 2:48 ` Gavin Shan
2015-05-12 8:06 ` Wei Yang
2015-05-12 23:09 ` Gavin Shan
2015-05-04 7:07 ` [PATCH V3 7/9] powerpc/powernv: Support EEH reset for VFs Wei Yang
2015-05-11 3:03 ` Gavin Shan
2015-05-04 7:07 ` [PATCH V3 8/9] powerpc/powernv: Support PCI config restore " Wei Yang
2015-05-11 4:22 ` Gavin Shan
2015-05-12 1:31 ` Wei Yang
2015-05-12 6:34 ` Gavin Shan
2015-05-12 8:16 ` Wei Yang
2015-05-12 23:16 ` Gavin Shan
2015-05-04 7:07 ` [PATCH V3 9/9] powerpc/eeh: handle VF PE properly Wei Yang
2015-05-13 1:16 ` Gavin Shan
2015-05-14 9:35 ` Wei Yang
2015-05-14 12:15 ` Gavin Shan
2015-05-14 10:02 ` Wei Yang
2015-05-14 12:30 ` Gavin Shan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150512072917.GA16788@richard \
--to=weiyang@linux.vnet.ibm.com \
--cc=bhelgaas@google.com \
--cc=gwshan@linux.vnet.ibm.com \
--cc=linux-pci@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).