* 2.6.0test3mm2 - Synaptics touchpad problem
@ 2003-08-15 9:25 Milan Roubal
2003-08-15 10:35 ` Paul Nasrat
0 siblings, 1 reply; 6+ messages in thread
From: Milan Roubal @ 2003-08-15 9:25 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 2135 bytes --]
Hi,
I have got problem runing Synaptics touchpad on kernel 2.6.0test3mm2.
When previously booted system was windows XP, than the touchpad is working:
here is part of working dmesg:
Console: switching to colour frame buffer device 128x48
PCI: Enabling device 0000:00:0c.0 (0000 -> 0002)
Yenta: CardBus bridge found at 0000:00:0c.0 [1558:4201]
Yenta IRQ list 02d8, PCI irq5
Socket status: 30000006
mice: PS/2 mouse device common for all mice
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
Synaptics Touchpad, model: 1
Firmware: 5.6
180 degree mounted touchpad
Sensor: 18
new absolute packet format
Touchpad has extended capability bits
-> four buttons
-> multifinger detection
-> palm detection
input: Synaptics Synaptics TouchPad on isa0060/serio4
serio: i8042 AUX3 port at 0x60,0x64 irq 12
input: AT Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
NET4: Linux TCP/IP 1.0 for NET4.0
But when previous system was linux, the touchpad is not working:
Console: switching to colour frame buffer device 128x48
Yenta: CardBus bridge found at 0000:00:0c.0 [1558:4201]
Yenta IRQ list 02d8, PCI irq5
Socket status: 30000006
mice: PS/2 mouse device common for all mice
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
input: AT Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
NET4: Linux TCP/IP 1.0 for NET4.0
Its reproduceable. My hardware is Clevo D610S notebook,
part of my config is here
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_INPUT=y
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1400
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1050
CONFIG_INPUT_EVDEV=y
I have not tested it with previous versions of kernel
Thanx for help.
Milan Roubal
[-- Attachment #2: touchpad-chodi-config --]
[-- Type: application/octet-stream, Size: 23630 bytes --]
CONFIG_BEGIN=n
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_EXPERIMENTAL=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y
CONFIG_X86_PC=y
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_X86_4G is not set
# CONFIG_X86_SWITCH_PAGETABLES is not set
# CONFIG_X86_4G_VM_LAYOUT is not set
# CONFIG_X86_UACCESS_INDIRECT is not set
# CONFIG_X86_HIGH_ENTRY is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_X86_MCE_P4THERMAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
# CONFIG_EDD is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_HIGHMEM=y
# CONFIG_HIGHPTE is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_PM=y
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_ACPI=y
# CONFIG_ACPI_HT_ONLY is not set
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_BUS=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_APM is not set
CONFIG_CPU_FREQ=y
# CONFIG_CPU_FREQ_PROC_INTF is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_TABLE=y
CONFIG_X86_ACPI_CPUFREQ=y
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_GX_SUSPMOD is not set
CONFIG_X86_SPEEDSTEP_ICH=y
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_LIB=y
CONFIG_X86_P4_CLOCKMOD=y
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
CONFIG_HOTPLUG=y
CONFIG_PCMCIA=y
CONFIG_YENTA=y
CONFIG_CARDBUS=y
# CONFIG_I82092 is not set
# CONFIG_TCIC is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y
# CONFIG_FW_LOADER is not set
# CONFIG_MTD is not set
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_PC_PCMCIA is not set
# CONFIG_PARPORT_OTHER is not set
# CONFIG_PARPORT_1284 is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG=y
# CONFIG_ISAPNP is not set
# CONFIG_PNPBIOS is not set
# CONFIG_BLK_DEV_FD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_LBD=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=y
CONFIG_IDE_TASK_IOCTL=y
CONFIG_IDE_TASKFILE_IO=y
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDE_TCQ is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_IDEDMA_ONLYDISK=y
# CONFIG_IDEDMA_PCI_WIP is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
CONFIG_BLK_DEV_SIS5513=y
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_DMA_NONPCI is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_SCSI=y
# CONFIG_BLK_DEV_SD is not set
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_REPORT_LUNS=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_SYM53C8XX is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_FERAL_ISP is not set
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID5=m
CONFIG_MD_MULTIPATH=m
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_IOCTL_V4 is not set
CONFIG_IEEE1394=m
CONFIG_IEEE1394_VERBOSEDEBUG=y
# CONFIG_IEEE1394_OUI_DB is not set
CONFIG_IEEE1394_OHCI1394=m
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
CONFIG_IEEE1394_CMP=m
# CONFIG_IEEE1394_AMDTP is not set
# CONFIG_I2O is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=y
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
# CONFIG_IP_VS_PROTO_TCP is not set
# CONFIG_IP_VS_PROTO_UDP is not set
# CONFIG_IP_VS_PROTO_ESP is not set
# CONFIG_IP_VS_PROTO_AH is not set
# CONFIG_IP_VS_RR is not set
# CONFIG_IP_VS_WRR is not set
# CONFIG_IP_VS_LC is not set
# CONFIG_IP_VS_WLC is not set
# CONFIG_IP_VS_LBLC is not set
# CONFIG_IP_VS_LBLCR is not set
# CONFIG_IP_VS_DH is not set
# CONFIG_IP_VS_SH is not set
# CONFIG_IP_VS_SED is not set
# CONFIG_IP_VS_NQ is not set
# CONFIG_IP_VS_FTP is not set
# CONFIG_IPV6 is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_UNCLEAN=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_MIRROR=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_NAT_LOCAL=y
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
CONFIG_IP_NF_COMPAT_IPFWADM=m
# CONFIG_XFRM_USER is not set
CONFIG_IPV6_SCTP__=y
CONFIG_IP_SCTP=m
# CONFIG_SCTP_ADLER32 is not set
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_SCTP_HMAC_NONE=y
# CONFIG_SCTP_HMAC_SHA1 is not set
# CONFIG_SCTP_HMAC_MD5 is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_PKTGEN=m
CONFIG_NETDEVICES=y
# CONFIG_ARCNET is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set
# CONFIG_NET_SB1000 is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_SIS900=y
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_IXGB is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
# CONFIG_PPP_ASYNC is not set
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_PPP_DEFLATE is not set
# CONFIG_PPP_BSDCOMP is not set
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
# CONFIG_NET_RADIO is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
# CONFIG_WAN is not set
# CONFIG_NET_PCMCIA is not set
# CONFIG_HAMRADIO is not set
CONFIG_IRDA=m
CONFIG_IRLAN=m
# CONFIG_IRNET is not set
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y
# CONFIG_IRDA_CACHE_LAST_LSAP is not set
# CONFIG_IRDA_FAST_RR is not set
# CONFIG_IRDA_DEBUG is not set
CONFIG_IRTTY_SIR=m
# CONFIG_DONGLE is not set
# CONFIG_IRTTY_OLD is not set
CONFIG_IRPORT_SIR=m
# CONFIG_DONGLE_OLD is not set
# CONFIG_TOSHIBA_OLD is not set
CONFIG_TOSHIBA_FIR=m
# CONFIG_VLSI_FIR is not set
# CONFIG_ISDN_BOOL is not set
# CONFIG_PHONE is not set
CONFIG_INPUT=y
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1400
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1050
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_SERIAL_8250 is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
# CONFIG_I2C is not set
# CONFIG_I2C_SENSOR is not set
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=m
# CONFIG_NVRAM is not set
CONFIG_RTC=m
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
# CONFIG_FTAPE is not set
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD_8151 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
CONFIG_AGP_SIS=y
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_MGA is not set
CONFIG_DRM_SIS=y
# CONFIG_SYNCLINK_CS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB is not set
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
# CONFIG_EXT2_FS_SECURITY is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_RT is not set
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_FAT_FS=m
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=m
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
CONFIG_RAMFS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NFS_FS is not set
CONFIG_NFSD=m
# CONFIG_NFSD_V3 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_LOCKD=m
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=m
# CONFIG_SUNRPC_GSS is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_SMB_NLS=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-2"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
CONFIG_FB=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
CONFIG_FB_SIS=y
CONFIG_FB_SIS_300=y
# CONFIG_FB_SIS_315 is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_PCI_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
CONFIG_SND=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_VXP440 is not set
# CONFIG_SOUND_PRIME is not set
# CONFIG_USB is not set
# CONFIG_USB_GADGET is not set
# CONFIG_BT is not set
# CONFIG_PROFILING is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_FRAME_POINTER is not set
CONFIG_X86_EXTRA_IRQS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
# CONFIG_SECURITY is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRC32=y
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_X86_BIOS_REBOOT=y
CONFIG_END=n
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: 2.6.0test3mm2 - Synaptics touchpad problem
2003-08-15 9:25 2.6.0test3mm2 - Synaptics touchpad problem Milan Roubal
@ 2003-08-15 10:35 ` Paul Nasrat
2003-08-15 11:00 ` Milan Roubal
0 siblings, 1 reply; 6+ messages in thread
From: Paul Nasrat @ 2003-08-15 10:35 UTC (permalink / raw)
To: Milan Roubal; +Cc: Andrew Morton, linux-kernel
On Fri, Aug 15, 2003 at 11:25:47AM +0200, Milan Roubal wrote:
> Hi,
> I have got problem runing Synaptics touchpad on kernel 2.6.0test3mm2.
> When previously booted system was windows XP, than the touchpad is working:
> here is part of working dmesg:
The touchpad driver uses the new event layer. You either need
userspace which understands it.
http://w1.894.telia.com/~u89404340/touchpad/ for XFree86 driver
The other option is to append, is to disable the extensions from
psmouse by appending
psmouse_noext=1 to your kernel arguments
Paul
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: 2.6.0test3mm2 - Synaptics touchpad problem
2003-08-15 10:35 ` Paul Nasrat
@ 2003-08-15 11:00 ` Milan Roubal
2003-08-15 11:39 ` Paul Nasrat
0 siblings, 1 reply; 6+ messages in thread
From: Milan Roubal @ 2003-08-15 11:00 UTC (permalink / raw)
To: Paul Nasrat; +Cc: Andrew Morton, linux-kernel
Hi,
I am using the new drivers for XFree86 and if the touchpad is visible
in dmesg, than it is working in XFree86 too. When it isn't,
it isn't than listed in /proc/bus/input/devices and is not working in
XFree86.
Milan Roubal
> On Fri, Aug 15, 2003 at 11:25:47AM +0200, Milan Roubal wrote:
> > Hi,
> > I have got problem runing Synaptics touchpad on kernel 2.6.0test3mm2.
> > When previously booted system was windows XP, than the touchpad is
working:
> > here is part of working dmesg:
>
> The touchpad driver uses the new event layer. You either need
> userspace which understands it.
>
> http://w1.894.telia.com/~u89404340/touchpad/ for XFree86 driver
>
> The other option is to append, is to disable the extensions from
> psmouse by appending
>
> psmouse_noext=1 to your kernel arguments
>
>
> Paul
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: 2.6.0test3mm2 - Synaptics touchpad problem
2003-08-15 11:00 ` Milan Roubal
@ 2003-08-15 11:39 ` Paul Nasrat
2003-08-15 12:18 ` Milan Roubal
2003-08-15 13:28 ` Milan Roubal
0 siblings, 2 replies; 6+ messages in thread
From: Paul Nasrat @ 2003-08-15 11:39 UTC (permalink / raw)
To: Milan Roubal; +Cc: Andrew Morton, linux-kernel
On Fri, Aug 15, 2003 at 01:00:09PM +0200, Milan Roubal wrote:
> Hi,
> I am using the new drivers for XFree86 and if the touchpad is visible
Apologies I misread your bug report. Maybe this will be of more help.
> in dmesg, than it is working in XFree86 too. When it isn't,
> it isn't than listed in /proc/bus/input/devices and is not working in
> XFree86.
That does seem odd, I haven't noticed this with vanilla 2.6.0test3
(linux only, but a reboot linux->linux would exhibit that).
I note on the non synaptics boot you have this instead of the synaptics.
serio: i8042 AUX3 port at 0x60,0x64 irq 12
It may be worth #define DEBUG in i8042.c, to see the differences between
the two boot sequences in more detail.
You might want to try against 2.6.0-test3, if it works for you
then it might be worth going through the synaptics patches in mm2 one by
one :(
http://www.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.0-test3/2.6.0-test3-mm2/broken-out/
http://w1.894.telia.com/~u89404340/patches/touchpad/2.6.0-test2/v1/Readme.txt
I'll see if I can replicate this with my laptop this evening.
Paul
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: 2.6.0test3mm2 - Synaptics touchpad problem
2003-08-15 11:39 ` Paul Nasrat
@ 2003-08-15 12:18 ` Milan Roubal
2003-08-15 13:28 ` Milan Roubal
1 sibling, 0 replies; 6+ messages in thread
From: Milan Roubal @ 2003-08-15 12:18 UTC (permalink / raw)
To: Paul Nasrat; +Cc: Andrew Morton, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 3288 bytes --]
Hi,
here are logs with debug enabled - working and not working.
I think the most interesitng part from the notworking is this:
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [285]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [285]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [287]
<7>drivers/input/serio/i8042.c: 02 -> i8042 (parameter) [287]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [290]
<7>drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [290]
<7>drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux3, 12, bad
parity, timeout) [295]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [295]
<7>drivers/input/serio/i8042.c: ed -> i8042 (parameter) [295]
<7>drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux3, 12, bad
parity, timeout) [298]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [298]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [298]
<7>drivers/input/serio/i8042.c: fe <- i8042 (flush, aux) [300]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [300]
<7>drivers/input/serio/i8042.c: 02 -> i8042 (parameter) [300]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [303]
<7>drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [303]
<7>drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux3, 12, bad
parity, timeout) [308]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [308]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [308]
<7>drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux3, 12, bad
parity, timeout) [311]
Full logs are attached.
Milan Roubal
----- Original Message -----
From: "Paul Nasrat" <pauln@truemesh.com>
To: "Milan Roubal" <roubm9am@barbora.ms.mff.cuni.cz>
Cc: "Andrew Morton" <akpm@osdl.org>; <linux-kernel@vger.kernel.org>
Sent: Friday, August 15, 2003 1:39 PM
Subject: Re: 2.6.0test3mm2 - Synaptics touchpad problem
> On Fri, Aug 15, 2003 at 01:00:09PM +0200, Milan Roubal wrote:
> > Hi,
> > I am using the new drivers for XFree86 and if the touchpad is visible
>
> Apologies I misread your bug report. Maybe this will be of more help.
>
> > in dmesg, than it is working in XFree86 too. When it isn't,
> > it isn't than listed in /proc/bus/input/devices and is not working in
> > XFree86.
>
> That does seem odd, I haven't noticed this with vanilla 2.6.0test3
> (linux only, but a reboot linux->linux would exhibit that).
>
> I note on the non synaptics boot you have this instead of the synaptics.
>
> serio: i8042 AUX3 port at 0x60,0x64 irq 12
>
> It may be worth #define DEBUG in i8042.c, to see the differences between
> the two boot sequences in more detail.
>
> You might want to try against 2.6.0-test3, if it works for you
> then it might be worth going through the synaptics patches in mm2 one by
> one :(
>
>
http://www.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.0-test3/2.6.0-test3-mm2/broken-out/
>
>
http://w1.894.telia.com/~u89404340/patches/touchpad/2.6.0-test2/v1/Readme.txt
>
> I'll see if I can replicate this with my laptop this evening.
>
> Paul
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
[-- Attachment #2: touchpad-debug-working --]
[-- Type: application/octet-stream, Size: 19248 bytes --]
Cannot find map file.
No module symbols loaded - kernel modules not enabled.
Cannot build symbol table - disabling symbol lookups
klogd 1.4.1, log source = ksyslog started.
: f6 -> i8042 (parameter) [209]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [211]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [211]
<7>drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [211]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [214]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [214]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [214]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [216]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [216]
<7>drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [216]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [219]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [219]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [219]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [221]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [221]
<7>drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [221]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [224]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [224]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [224]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [227]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [227]
<7>drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [227]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [229]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [229]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [229]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [232]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [232]
<7>drivers/input/serio/i8042.c: e9 -> i8042 (parameter) [232]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [234]
<7>drivers/input/serio/i8042.c: 06 <- i8042 (interrupt, aux3, 12) [236]
<7>drivers/input/serio/i8042.c: 47 <- i8042 (interrupt, aux3, 12) [237]
<7>drivers/input/serio/i8042.c: 15 <- i8042 (interrupt, aux3, 12) [238]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [238]
<7>drivers/input/serio/i8042.c: ff -> i8042 (parameter) [238]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [241]
<7>drivers/input/serio/i8042.c: aa <- i8042 (interrupt, aux3, 12) [630]
<7>drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, aux3, 12) [632]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [632]
<7>drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [632]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [634]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [634]
<7>drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [634]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [637]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [637]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [637]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [639]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [639]
<7>drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [639]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [642]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [642]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [642]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [645]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [645]
<7>drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [645]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [647]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [647]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [647]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [650]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [650]
<7>drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [650]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [652]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [652]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [652]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [655]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [655]
<7>drivers/input/serio/i8042.c: e9 -> i8042 (parameter) [655]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [657]
<7>drivers/input/serio/i8042.c: 06 <- i8042 (interrupt, aux3, 12) [659]
<7>drivers/input/serio/i8042.c: 47 <- i8042 (interrupt, aux3, 12) [660]
<7>drivers/input/serio/i8042.c: 15 <- i8042 (interrupt, aux3, 12) [661]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [661]
<7>drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [661]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [664]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [664]
<7>drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [664]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [666]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [666]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [666]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [669]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [669]
<7>drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [669]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [671]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [671]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [671]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [674]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [674]
<7>drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [674]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [677]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [677]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [677]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [679]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [679]
<7>drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [679]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [682]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [682]
<7>drivers/input/serio/i8042.c: 03 -> i8042 (parameter) [682]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [684]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [684]
<7>drivers/input/serio/i8042.c: e9 -> i8042 (parameter) [684]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [687]
<7>drivers/input/serio/i8042.c: 92 <- i8042 (interrupt, aux3, 12) [688]
<7>drivers/input/serio/i8042.c: 44 <- i8042 (interrupt, aux3, 12) [689]
<7>drivers/input/serio/i8042.c: b1 <- i8042 (interrupt, aux3, 12) [691]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [691]
<7>drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [691]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [693]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [693]
<7>drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [693]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [696]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [696]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [696]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [698]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [698]
<7>drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [698]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [701]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [701]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [701]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [703]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [703]
<7>drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [703]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [706]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [706]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [706]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [709]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [709]
<7>drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [709]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [711]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [711]
<7>drivers/input/serio/i8042.c: 02 -> i8042 (parameter) [711]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [714]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [714]
<7>drivers/input/serio/i8042.c: e9 -> i8042 (parameter) [714]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [716]
<7>drivers/input/serio/i8042.c: 80 <- i8042 (interrupt, aux3, 12) [718]
<7>drivers/input/serio/i8042.c: 47 <- i8042 (interrupt, aux3, 12) [719]
<7>drivers/input/serio/i8042.c: 1b <- i8042 (interrupt, aux3, 12) [720]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [720]
<7>drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [720]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [723]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [723]
<7>drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [723]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [725]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [725]
<7>drivers/input/serio/i8042.c: 03 -> i8042 (parameter) [725]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [728]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [728]
<7>drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [728]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [730]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [730]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [730]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [733]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [733]
<7>drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [733]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [736]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [736]
<7>drivers/input/serio/i8042.c: 01 -> i8042 (parameter) [736]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [738]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [738]
<7>drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [738]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [741]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [741]
<7>drivers/input/serio/i8042.c: 01 -> i8042 (parameter) [741]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [743]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [743]
<7>drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [743]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [746]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [746]
<7>drivers/input/serio/i8042.c: 14 -> i8042 (parameter) [746]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [748]
<6>Synaptics Touchpad, model: 1
<6> Firmware: 5.6
<6> 180 degree mounted touchpad
<6> Sensor: 18
<6> new absolute packet format
<6> Touchpad has extended capability bits
<6> -> four buttons
<6> -> multifinger detection
<6> -> palm detection
<6>input: Synaptics Synaptics TouchPad on isa0060/serio4
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [773]
<7>drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [773]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [775]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [775]
<7>drivers/input/serio/i8042.c: 64 -> i8042 (parameter) [775]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [778]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [778]
<7>drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [778]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [781]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [781]
<7>drivers/input/serio/i8042.c: c8 -> i8042 (parameter) [781]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [783]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [783]
<7>drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [783]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [786]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [786]
<7>drivers/input/serio/i8042.c: 03 -> i8042 (parameter) [786]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [788]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [788]
<7>drivers/input/serio/i8042.c: e6 -> i8042 (parameter) [788]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [791]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [791]
<7>drivers/input/serio/i8042.c: ea -> i8042 (parameter) [791]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [793]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [793]
<7>drivers/input/serio/i8042.c: f4 -> i8042 (parameter) [793]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux3, 12) [796]
<6>serio: i8042 AUX3 port at 0x60,0x64 irq 12
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [798]
<7>drivers/input/serio/i8042.c: 02 -> i8042 (parameter) [798]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [798]
<7>drivers/input/serio/i8042.c: 03 -> i8042 (parameter) [798]
<7>drivers/input/serio/i8042.c: f2 -> i8042 (kbd-data) [798]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [801]
<7>drivers/input/serio/i8042.c: ab <- i8042 (interrupt, kbd, 1) [801]
<7>drivers/input/serio/i8042.c: 83 <- i8042 (interrupt, kbd, 1) [806]
<7>drivers/input/serio/i8042.c: ed -> i8042 (kbd-data) [806]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [809]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (kbd-data) [809]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [812]
<7>drivers/input/serio/i8042.c: f8 -> i8042 (kbd-data) [812]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [815]
<7>drivers/input/serio/i8042.c: f4 -> i8042 (kbd-data) [815]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [818]
<7>drivers/input/serio/i8042.c: f0 -> i8042 (kbd-data) [818]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [820]
<7>drivers/input/serio/i8042.c: 02 -> i8042 (kbd-data) [820]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [823]
<7>drivers/input/serio/i8042.c: f0 -> i8042 (kbd-data) [823]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [826]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (kbd-data) [826]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [829]
<7>drivers/input/serio/i8042.c: 02 <- i8042 (interrupt, kbd, 1) [829]
<6>input: AT Set 2 keyboard on isa0060/serio0
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP: routing cache hash table of 4096 buckets, 32Kbytes
<6>TCP: Hash tables configured (established 32768 bind 65536)
<6>IPv4 over IPv4 tunneling driver
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<6>cpufreq: No CPUs supporting ACPI performance management found.
<6>ACPI: (supports S0 S3 S4 S5)
<5>RAMDISK: Compressed image found at block 0
<6>Freeing initrd memory: 348k freed
<4>VFS: Mounted root (ext2 filesystem).
<4>found reiserfs format "3.6" with standard journal
<4>Reiserfs journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<4>reiserfs: checking transaction log (hda1) for (hda1)
<4>Using r5 hash to sort names
<4>VFS: Mounted root (reiserfs filesystem) readonly.
<5>Trying to move old root to /initrd ... failed
<5>Unmounting old root
<5>Trying to free ramdisk memory ... okay
<6>Freeing unused kernel memory: 172k freed
<6>Adding 514040k swap on /dev/hda6. Priority:42 extents:1
<6>NTFS driver 2.1.4 [Flags: R/O MODULE].
<6>NTFS volume version 3.1.
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [9397]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [10398]
<7>drivers/input/serio/i8042.c: 5a <- i8042 (interrupt, kbd, 1) [13306]
<7>drivers/input/serio/i8042.c: f0 <- i8042 (interrupt, kbd, 1) [13398]
<7>drivers/input/serio/i8042.c: 5a <- i8042 (interrupt, kbd, 1) [13403]
<4>blk: queue ddd79e00, I/O limit 4095Mb (mask 0xffffffff)
<4>hdc: Disabling (U)DMA for SAMSUNG CD-ROM SN-124
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Fri Aug 15 16:06:48 2003
modprobe: FATAL: Module block_major_9 not found.
showconsole: Warning: the ioctl TIOCGDEV is not known by the kernel
Run file system check on root for LVM activation
doneRemounting root file system (/) read/write for vgscan...
Scanning for LVM volume groups...
modprobe: FATAL: Module char_major_109 not found.
vgscan -- LVM driver/module not loaded?
Activating LVM volume groups...
modprobe: FATAL: Module char_major_109 not found.
modprobe: FATAL: Module char_major_109 not found.
vgchange -- LVM driver/module not loaded?
done
Activating swap-devices in /etc/fstab...
doneshowconsole: Warning: the ioctl TIOCGDEV is not known by the kernel
Checking file systems...
fsck 1.28 (31-Aug-2002)
Reiserfs super block in block 16 on 0x301 of format 3.6 with standard journal
Blocks (total/free): 1536207/4141 by 4096 bytes
Filesystem is clean
doneMounting local file systems...
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/sys on /sys type sysfs (rw)
/dev/hda3 on /windows type ntfs (ro,nosuid,nodev,nls=iso8859-2,umask=000)
doneActivating crypto devices using /etc/cryptotab ...
FATAL: Module loop_fish2 not found.
Please enter passphrase for /dev/hda5. failedLoading required kernel modules
doneSetting up IDE DMA mode
/dev/hda:
setting using_dma to 1 (on)
using_dma = 1 (on)
/dev/hdc:
setting using_dma to 1 (on)
using_dma = 1 (on)
done
Restore device permissionsdone
Activating remaining swap-devices in /etc/fstab...
doneSetting up the CMOS clockmodprobe: FATAL: Module char_major_10_135 not found.
modprobe: FATAL: Module char_major_10_135 not found.
done
Setting up timezone datadone
Setting up hostname 'izidor'done
Setting up loopback interface done
Disabling IP forwardingdone
Creating /var/log/boot.msg
doneshowconsole: Warning: the ioctl TIOCGDEV is not known by the kernel
<notice>killproc: kill(30,29)
Running /etc/init.d/boot.local
/dev/hda:
setting 32-bit IO_support flag to 1
setting unmaskirq to 1 (on)
setting standby to 60 (5 minutes)
IO_support = 1 (32-bit)
unmaskirq = 1 (on)
/etc/init.d/boot.local: line 16: /proc/sys/dev/rtc/max-user-freq: No such file or directory
failed<notice>killproc: kill(30,3)
[-- Attachment #3: touchpad-debug-not-working --]
[-- Type: application/octet-stream, Size: 19273 bytes --]
Cannot find map file.
No module symbols loaded - kernel modules not enabled.
Cannot build symbol table - disabling symbol lookups
klogd 1.4.1, log source = ksyslog started.
K
<6>CPU: L2 cache: 512K
<7>CPU: After all inits, caps: 3febf9ff 00000000 00000000 00000080
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<6>CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available
<6>CPU#0: Thermal monitoring enabled
<4>CPU: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 04
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<4>POSIX conformance testing by UNIFIX
<4>Initializing RT netlink socket
<6>PCI: PCI BIOS revision 2.10 entry at 0xfd9ae, last bus=1
<6>PCI: Using configuration type 1
<6>mtrr: v2.0 (20020519)
<4>BIO: pool of 256 setup, 15Kb (60 bytes/bio)
<4>biovec pool[0]: 1 bvecs: 256 entries (12 bytes)
<4>biovec pool[1]: 4 bvecs: 256 entries (48 bytes)
<4>biovec pool[2]: 16 bvecs: 256 entries (192 bytes)
<4>biovec pool[3]: 64 bvecs: 256 entries (768 bytes)
<4>biovec pool[4]: 128 bvecs: 256 entries (1536 bytes)
<4>biovec pool[5]: 256 bvecs: 256 entries (3072 bytes)
<6>ACPI: Subsystem revision 20030714
<4> tbxface-0117 [03] acpi_load_tables : ACPI Tables successfully acquired
<4>Parsing all Control Methods:..................................................................................................................
<4>Table [DSDT](id F004) - 405 Objects with 39 Devices 114 Methods 12 Regions
<4>ACPI Namespace successfully loaded at root c0437c9c
<4>evxfevnt-0093 [04] acpi_enable : Transition to ACPI mode successful
<4>evgpeblk-0748 [06] ev_create_gpe_block : GPE 00 to 15 [_GPE] 2 regs at 0000000000008020 on int 11
<4>evgpeblk-0748 [06] ev_create_gpe_block : GPE 16 to 31 [_GPE] 2 regs at 0000000000008030 on int 11
<4>Completing Region/Field/Buffer/Package initialization:...........................................................................
<4>Initialized 12/12 Regions 5/5 Fields 33/33 Buffers 25/25 Packages (413 nodes)
<4>Executing all Device _STA and_INI methods:........................................
<4>40 Devices found containing: 40 _STA, 2 _INI methods
<6>ACPI: Interpreter enabled
<6>ACPI: Using PIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (00:00)
<4>PCI: Probing PCI hardware (bus 00)
<6>Enabling SiS 96x SMBus.
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs *5)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 5, disabled)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs *11)
<4>ACPI: PCI Interrupt Link [LNKE] (IRQs *11)
<4>ACPI: PCI Interrupt Link [LNKF] (IRQs 10, disabled)
<4>ACPI: PCI Interrupt Link [LNKG] (IRQs 10, disabled)
<4>ACPI: PCI Interrupt Link [LNKH] (IRQs *10)
<6>ACPI: Embedded Controller [EC] (gpe 23)
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<7>pnp: the driver 'system' has been registered
<5>SCSI subsystem initialized
<6>Linux Kernel Card Services 3.1.22
<6> options: [pci] [cardbus] [pm]
<4>ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
<4>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
<4>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
<4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
<4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
<4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
<4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
<6>PCI: Using ACPI for IRQ routing
<6>PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
<3>PCI: Cannot allocate resource region 1 of device 0000:00:0a.0
<3>PCI: Cannot allocate resource region 0 of device 0000:00:02.6
<3>PCI: Cannot allocate resource region 0 of device 0000:00:0b.0
<3>PCI: Cannot allocate resource region 1 of device 0000:00:0b.0
<6>vesafb: framebuffer at 0xf0000000, mapped to 0xde809000, size 16384k
<6>vesafb: mode is 1024x768x16, linelength=2048, pages=4
<6>vesafb: protected mode interface info at cb45:0000
<6>vesafb: scrolling: redraw
<6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
<6>fb0: VESA VGA frame buffer device
<4>Console: switching to colour frame buffer device 128x48
<4>pty: 256 Unix98 ptys configured
<6>Machine check exception polling timer started.
<6>cpufreq: P4/Xeon(TM) CPU On-Demand Clock Modulation available
<6>ikconfig 0.5 with /proc/ikconfig
<6>Initializing Cryptographic API
<6>ACPI: AC Adapter [ADP0] (on-line)
<6>ACPI: Battery Slot [BAT0] (battery present)
<6>ACPI: Power Button (CM) [PWRB]
<6>ACPI: Sleep Button (CM) [SLPB]
<6>ACPI: Lid Switch [LID]
<6>ACPI: Processor [CPU0] (supports C1, 8 throttling states)
<6>ACPI: Thermal Zone [THM0] (52 C)
<6>Linux agpgart interface v0.100 (c) Dave Jones
<6>agpgart: Detected SiS 650 chipset
<6>agpgart: Maximum main memory to use for agp memory: 410M
<6>agpgart: AGP aperture is 64M @ 0xe8000000
<6>[drm] Initialized sis 1.0.0 20010503 on minor 0
<7>pnp: the driver 'parport_pc' has been registered
<6>parport0: PC-style at 0x378 (0x778) [PCSPP(,...)]
<6>parport0: irq 7 detected
<4>RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
<6>loop: loaded (max 8 devices)
<6>8139too Fast Ethernet driver 0.9.26
<7>PCI: Setting latency timer of device 0000:00:0a.0 to 64
<6>eth0: RealTek RTL8139 Fast Ethernet at 0xdf820000, 00:90:f5:01:45:45, IRQ 11
<7>eth0: Identified 8139 chip type 'RTL-8139C'
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>SIS5513: IDE controller at PCI slot 0000:00:02.5
<6>SIS5513: chipset revision 208
<6>SIS5513: not 100%% native mode: will probe irqs later
<6>SIS5513: SiS 961 MuTIOL IDE UDMA100 controller
<6> ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:pio, hdb:pio
<6> ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:pio, hdd:pio
<4>hda: TOSHIBA MK3018GAP, ATA DISK drive
<4>Using anticipatory scheduling elevator
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>hdc: SAMSUNG CD-ROM SN-124, ATAPI CD/DVD-ROM drive
<4>ide1 at 0x170-0x177,0x376 on irq 15
<4>hda: max request size: 128KiB
<6>hda: 58605120 sectors (30005 MB), CHS=58140/16/63, UDMA(100)
<6> hda: hda1 hda2 < hda5 hda6 > hda3
<4>hdc: ATAPI 24X CD-ROM drive, 128kB Cache
<6>Uniform CD-ROM driver Revision: 3.12
<4>Console: switching to colour frame buffer device 128x48
<4>PCI: Enabling device 0000:00:0c.0 (0000 -> 0002)
<6>Yenta: CardBus bridge found at 0000:00:0c.0 [1558:4201]
<4>Yenta IRQ list 02d8, PCI irq5
<4>Socket status: 30000006
<6>mice: PS/2 mouse device common for all mice
<7>drivers/input/serio/i8042.c: 20 -> i8042 (command) [0]
<7>drivers/input/serio/i8042.c: 47 <- i8042 (return) [0]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [1]
<7>drivers/input/serio/i8042.c: 56 -> i8042 (parameter) [1]
<7>drivers/input/serio/i8042.c: d3 -> i8042 (command) [4]
<7>drivers/input/serio/i8042.c: f0 -> i8042 (parameter) [4]
<7>drivers/input/serio/i8042.c: 0f <- i8042 (return) [4]
<7>drivers/input/serio/i8042.c: d3 -> i8042 (command) [7]
<7>drivers/input/serio/i8042.c: 56 -> i8042 (parameter) [7]
<7>drivers/input/serio/i8042.c: a9 <- i8042 (return) [7]
<7>drivers/input/serio/i8042.c: d3 -> i8042 (command) [9]
<7>drivers/input/serio/i8042.c: a4 -> i8042 (parameter) [9]
<7>drivers/input/serio/i8042.c: ee <- i8042 (return) [9]
<6>i8042.c: Detected active multiplexing controller, rev 1.1.
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [16]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [16]
<7>drivers/input/serio/i8042.c: 90 -> i8042 (command) [18]
<7>drivers/input/serio/i8042.c: a8 -> i8042 (command) [20]
<7>drivers/input/serio/i8042.c: 91 -> i8042 (command) [21]
<7>drivers/input/serio/i8042.c: a8 -> i8042 (command) [22]
<7>drivers/input/serio/i8042.c: 92 -> i8042 (command) [24]
<7>drivers/input/serio/i8042.c: a8 -> i8042 (command) [25]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [26]
<7>drivers/input/serio/i8042.c: a8 -> i8042 (command) [27]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [29]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [29]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [31]
<7>drivers/input/serio/i8042.c: 02 -> i8042 (parameter) [31]
<7>drivers/input/serio/i8042.c: 90 -> i8042 (command) [34]
<7>drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [34]
<7>drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux0, 12, timeout) [57]
<7>drivers/input/serio/i8042.c: 90 -> i8042 (command) [57]
<7>drivers/input/serio/i8042.c: ed -> i8042 (parameter) [57]
<7>drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux0, 12, timeout) [81]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [81]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [81]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [83]
<7>drivers/input/serio/i8042.c: 02 -> i8042 (parameter) [83]
<7>drivers/input/serio/i8042.c: 90 -> i8042 (command) [86]
<7>drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [86]
<7>drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux0, 12, timeout) [109]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [109]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [109]
<6>serio: i8042 AUX0 port at 0x60,0x64 irq 12
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [114]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [114]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [117]
<7>drivers/input/serio/i8042.c: 02 -> i8042 (parameter) [117]
<7>drivers/input/serio/i8042.c: 91 -> i8042 (command) [119]
<7>drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [119]
<7>drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux1, 12, timeout) [143]
<7>drivers/input/serio/i8042.c: 91 -> i8042 (command) [143]
<7>drivers/input/serio/i8042.c: ed -> i8042 (parameter) [143]
<7>drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux1, 12, timeout) [166]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [166]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [166]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [169]
<7>drivers/input/serio/i8042.c: 02 -> i8042 (parameter) [169]
<7>drivers/input/serio/i8042.c: 91 -> i8042 (command) [171]
<7>drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [171]
<7>drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux1, 12, timeout) [195]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [195]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [195]
<6>serio: i8042 AUX1 port at 0x60,0x64 irq 12
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [200]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [200]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [202]
<7>drivers/input/serio/i8042.c: 02 -> i8042 (parameter) [202]
<7>drivers/input/serio/i8042.c: 92 -> i8042 (command) [205]
<7>drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [205]
<7>drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux2, 12, timeout) [228]
<7>drivers/input/serio/i8042.c: 92 -> i8042 (command) [228]
<7>drivers/input/serio/i8042.c: ed -> i8042 (parameter) [228]
<7>drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux2, 12, timeout) [251]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [251]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [251]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [254]
<7>drivers/input/serio/i8042.c: 02 -> i8042 (parameter) [254]
<7>drivers/input/serio/i8042.c: 92 -> i8042 (command) [256]
<7>drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [256]
<7>drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux2, 12, timeout) [280]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [280]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [280]
<6>serio: i8042 AUX2 port at 0x60,0x64 irq 12
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [285]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [285]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [287]
<7>drivers/input/serio/i8042.c: 02 -> i8042 (parameter) [287]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [290]
<7>drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [290]
<7>drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux3, 12, bad parity, timeout) [295]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [295]
<7>drivers/input/serio/i8042.c: ed -> i8042 (parameter) [295]
<7>drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux3, 12, bad parity, timeout) [298]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [298]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [298]
<7>drivers/input/serio/i8042.c: fe <- i8042 (flush, aux) [300]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [300]
<7>drivers/input/serio/i8042.c: 02 -> i8042 (parameter) [300]
<7>drivers/input/serio/i8042.c: 93 -> i8042 (command) [303]
<7>drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [303]
<7>drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux3, 12, bad parity, timeout) [308]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [308]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [308]
<7>drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux3, 12, bad parity, timeout) [311]
<6>serio: i8042 AUX3 port at 0x60,0x64 irq 12
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [315]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (parameter) [315]
<7>drivers/input/serio/i8042.c: 60 -> i8042 (command) [317]
<7>drivers/input/serio/i8042.c: 01 -> i8042 (parameter) [317]
<7>drivers/input/serio/i8042.c: f2 -> i8042 (kbd-data) [320]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [324]
<7>drivers/input/serio/i8042.c: ab <- i8042 (interrupt, kbd, 1) [325]
<7>drivers/input/serio/i8042.c: 83 <- i8042 (interrupt, kbd, 1) [329]
<7>drivers/input/serio/i8042.c: ed -> i8042 (kbd-data) [329]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [333]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (kbd-data) [333]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [337]
<7>drivers/input/serio/i8042.c: f8 -> i8042 (kbd-data) [337]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [342]
<7>drivers/input/serio/i8042.c: f4 -> i8042 (kbd-data) [342]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [346]
<7>drivers/input/serio/i8042.c: f0 -> i8042 (kbd-data) [346]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [350]
<7>drivers/input/serio/i8042.c: 02 -> i8042 (kbd-data) [350]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [355]
<7>drivers/input/serio/i8042.c: f0 -> i8042 (kbd-data) [355]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [359]
<7>drivers/input/serio/i8042.c: 00 -> i8042 (kbd-data) [359]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [364]
<7>drivers/input/serio/i8042.c: 02 <- i8042 (interrupt, kbd, 1) [366]
<6>input: AT Set 2 keyboard on isa0060/serio0
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP: routing cache hash table of 4096 buckets, 32Kbytes
<6>TCP: Hash tables configured (established 32768 bind 65536)
<6>IPv4 over IPv4 tunneling driver
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<6>cpufreq: No CPUs supporting ACPI performance management found.
<6>ACPI: (supports S0 S3 S4 S5)
<5>RAMDISK: Compressed image found at block 0
<6>Freeing initrd memory: 348k freed
<4>VFS: Mounted root (ext2 filesystem).
<4>found reiserfs format "3.6" with standard journal
<4>Reiserfs journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<4>reiserfs: checking transaction log (hda1) for (hda1)
<4>Using r5 hash to sort names
<4>VFS: Mounted root (reiserfs filesystem) readonly.
<5>Trying to move old root to /initrd ... failed
<5>Unmounting old root
<5>Trying to free ramdisk memory ... okay
<6>Freeing unused kernel memory: 172k freed
<6>Adding 514040k swap on /dev/hda6. Priority:42 extents:1
<6>NTFS driver 2.1.4 [Flags: R/O MODULE].
<6>NTFS volume version 3.1.
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [9138]
<7>drivers/input/serio/i8042.c: fa <- i8042 (interrupt, kbd, 1) [10141]
<7>drivers/input/serio/i8042.c: 5a <- i8042 (interrupt, kbd, 1) [13488]
<7>drivers/input/serio/i8042.c: f0 <- i8042 (interrupt, kbd, 1) [13559]
<7>drivers/input/serio/i8042.c: 5a <- i8042 (interrupt, kbd, 1) [13564]
<4>blk: queue ddd79e00, I/O limit 4095Mb (mask 0xffffffff)
<4>hdc: Disabling (U)DMA for SAMSUNG CD-ROM SN-124
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Fri Aug 15 16:09:59 2003
modprobe: FATAL: Module block_major_9 not found.
showconsole: Warning: the ioctl TIOCGDEV is not known by the kernel
Run file system check on root for LVM activation
doneRemounting root file system (/) read/write for vgscan...
Scanning for LVM volume groups...
modprobe: FATAL: Module char_major_109 not found.
vgscan -- LVM driver/module not loaded?
Activating LVM volume groups...
modprobe: FATAL: Module char_major_109 not found.
modprobe: FATAL: Module char_major_109 not found.
vgchange -- LVM driver/module not loaded?
done
Activating swap-devices in /etc/fstab...
doneshowconsole: Warning: the ioctl TIOCGDEV is not known by the kernel
Checking file systems...
fsck 1.28 (31-Aug-2002)
Reiserfs super block in block 16 on 0x301 of format 3.6 with standard journal
Blocks (total/free): 1536207/4138 by 4096 bytes
Filesystem is clean
doneMounting local file systems...
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/sys on /sys type sysfs (rw)
/dev/hda3 on /windows type ntfs (ro,nosuid,nodev,nls=iso8859-2,umask=000)
doneActivating crypto devices using /etc/cryptotab ...
FATAL: Module loop_fish2 not found.
Please enter passphrase for /dev/hda5. failedLoading required kernel modules
doneSetting up IDE DMA mode
/dev/hda:
setting using_dma to 1 (on)
using_dma = 1 (on)
/dev/hdc:
setting using_dma to 1 (on)
using_dma = 1 (on)
done
Restore device permissionsdone
Activating remaining swap-devices in /etc/fstab...
doneSetting up the CMOS clockmodprobe: FATAL: Module char_major_10_135 not found.
modprobe: FATAL: Module char_major_10_135 not found.
done
Setting up timezone datadone
Setting up hostname 'izidor'done
Setting up loopback interface done
Disabling IP forwardingdone
Creating /var/log/boot.msg
doneshowconsole: Warning: the ioctl TIOCGDEV is not known by the kernel
<notice>killproc: kill(30,29)
Running /etc/init.d/boot.local
/dev/hda:
setting 32-bit IO_support flag to 1
setting unmaskirq to 1 (on)
setting standby to 60 (5 minutes)
IO_support = 1 (32-bit)
unmaskirq = 1 (on)
/etc/init.d/boot.local: line 16: /proc/sys/dev/rtc/max-user-freq: No such file or directory
failed<notice>killproc: kill(30,3)
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: 2.6.0test3mm2 - Synaptics touchpad problem
2003-08-15 11:39 ` Paul Nasrat
2003-08-15 12:18 ` Milan Roubal
@ 2003-08-15 13:28 ` Milan Roubal
1 sibling, 0 replies; 6+ messages in thread
From: Milan Roubal @ 2003-08-15 13:28 UTC (permalink / raw)
To: Paul Nasrat; +Cc: Andrew Morton, linux-kernel
>
> You might want to try against 2.6.0-test3, if it works for you
> then it might be worth going through the synaptics patches in mm2 one by
> one :(
So I tested it against 2.6.0-test3 and 2.6.0-test2 and situation is same.
Milan
>
>
http://www.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.0-test3/2.6.0-test3-mm2/broken-out/
>
>
http://w1.894.telia.com/~u89404340/patches/touchpad/2.6.0-test2/v1/Readme.txt
>
> I'll see if I can replicate this with my laptop this evening.
>
> Paul
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2003-08-15 13:30 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-08-15 9:25 2.6.0test3mm2 - Synaptics touchpad problem Milan Roubal
2003-08-15 10:35 ` Paul Nasrat
2003-08-15 11:00 ` Milan Roubal
2003-08-15 11:39 ` Paul Nasrat
2003-08-15 12:18 ` Milan Roubal
2003-08-15 13:28 ` Milan Roubal
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).