2.6.0-test3 latest bk hangs when enabling IO-APIC

2.6.0-test3 latest bk hangs when enabling IO-APIC

[Stian Jordet]

Hello,

latest bk of 2.6.0-test3 hangs with these three lines:

ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.

And there it stays forever. 2.6.0-test3 worked like a charm. This is a
Asus CUV265-DLS motherboard. Dual P3.

Should I file a bugreport at bugzilla?

Best regards,
Stian

RE: 2.6.0-test3 latest bk hangs when enabling IO-APIC

[Stian Jordet]

man, 18.08.2003 kl. 21.23 skrev Stian Jordet:
> man, 18.08.2003 kl. 19.53 skrev Brown, Len: 
> > Try booting with pci=noacpi, and if that doesn't work acpi=off
> > If either of those work, then file in bugzilla with component=ACPI and
> > assign it to len.brown@intel.com
> 
> It works when booting with noapic, but not with acpi=off nor pci=noapic.
> Does that mean I can't blame you for it?

Just to confuse myself (and whoever reading my mails). When I disabled
the second onboard ide-port, the kernel booted, but usb didn't work.
Absolutely no problem what so ever with -test3.

Best regards,
Stian

RE: 2.6.0-test3 latest bk hangs when enabling IO-APIC

[Stian Jordet]

man, 18.08.2003 kl. 19.53 skrev Brown, Len: 
> Try booting with pci=noacpi, and if that doesn't work acpi=off
> If either of those work, then file in bugzilla with component=ACPI and
> assign it to len.brown@intel.com

It works when booting with noapic, but not with acpi=off nor pci=noapic.
Does that mean I can't blame you for it?

Best regards,
Stian

> > --Original Message--
> > From: Stian Jordet [mailto:liste@jordet.nu] 
> > Sent: Monday, August 18, 2003 9:10 AM
> > To: linux-kernel@vger.kernel.org
> > Subject: 2.6.0-test3 latest bk hangs when enabling IO-APIC
> > 
> > 
> > Hello,
> > 
> > latest bk of 2.6.0-test3 hangs with these three lines:
> > 
> > ENABLING IO-APIC IRQs
> > Setting 2 in the phys_id_present_map
> > ...changing IO-APIC physical APIC ID to 2 ... ok.
> > 
> > And there it stays forever. 2.6.0-test3 worked like a charm. This is a
> > Asus CUV265-DLS motherboard. Dual P3.
> > 
> > Should I file a bugreport at bugzilla?
> > 
> > Best regards,
> > Stian

RE: 2.6.0-test3 latest bk hangs when enabling IO-APIC

[Brown, Len]

Try booting with pci=noacpi, and if that doesn't work acpi=off
If either of those work, then file in bugzilla with component=ACPI and
assign it to len.brown@intel.com

Thanks,
-Len

> -----Original Message-----
> From: Stian Jordet [mailto:liste@jordet.nu] 
> Sent: Monday, August 18, 2003 9:10 AM
> To: linux-kernel@vger.kernel.org
> Subject: 2.6.0-test3 latest bk hangs when enabling IO-APIC
> 
> 
> Hello,
> 
> latest bk of 2.6.0-test3 hangs with these three lines:
> 
> ENABLING IO-APIC IRQs
> Setting 2 in the phys_id_present_map
> ...changing IO-APIC physical APIC ID to 2 ... ok.
> 
> And there it stays forever. 2.6.0-test3 worked like a charm. This is a
> Asus CUV265-DLS motherboard. Dual P3.
> 
> Should I file a bugreport at bugzilla?
> 
> Best regards,
> Stian
> 
> -
> To unsubscribe from this list: send the line "unsubscribe 
> linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
>