* RE: 2.6.0-test3 latest bk hangs when enabling IO-APIC
@ 2003-08-18 17:53 Brown, Len
2003-08-18 19:23 ` Stian Jordet
0 siblings, 1 reply; 6+ messages in thread
From: Brown, Len @ 2003-08-18 17:53 UTC (permalink / raw)
To: Stian Jordet, linux-kernel
Try booting with pci=noacpi, and if that doesn't work acpi=off
If either of those work, then file in bugzilla with component=ACPI and
assign it to len.brown@intel.com
Thanks,
-Len
> -----Original Message-----
> From: Stian Jordet [mailto:liste@jordet.nu]
> Sent: Monday, August 18, 2003 9:10 AM
> To: linux-kernel@vger.kernel.org
> Subject: 2.6.0-test3 latest bk hangs when enabling IO-APIC
>
>
> Hello,
>
> latest bk of 2.6.0-test3 hangs with these three lines:
>
> ENABLING IO-APIC IRQs
> Setting 2 in the phys_id_present_map
> ...changing IO-APIC physical APIC ID to 2 ... ok.
>
> And there it stays forever. 2.6.0-test3 worked like a charm. This is a
> Asus CUV265-DLS motherboard. Dual P3.
>
> Should I file a bugreport at bugzilla?
>
> Best regards,
> Stian
>
> -
> To unsubscribe from this list: send the line "unsubscribe
> linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: 2.6.0-test3 latest bk hangs when enabling IO-APIC
2003-08-18 17:53 2.6.0-test3 latest bk hangs when enabling IO-APIC Brown, Len
@ 2003-08-18 19:23 ` Stian Jordet
2003-08-18 20:06 ` Stian Jordet
0 siblings, 1 reply; 6+ messages in thread
From: Stian Jordet @ 2003-08-18 19:23 UTC (permalink / raw)
To: Brown, Len; +Cc: linux-kernel
man, 18.08.2003 kl. 19.53 skrev Brown, Len:
> Try booting with pci=noacpi, and if that doesn't work acpi=off
> If either of those work, then file in bugzilla with component=ACPI and
> assign it to len.brown@intel.com
It works when booting with noapic, but not with acpi=off nor pci=noapic.
Does that mean I can't blame you for it?
Best regards,
Stian
> > --Original Message--
> > From: Stian Jordet [mailto:liste@jordet.nu]
> > Sent: Monday, August 18, 2003 9:10 AM
> > To: linux-kernel@vger.kernel.org
> > Subject: 2.6.0-test3 latest bk hangs when enabling IO-APIC
> >
> >
> > Hello,
> >
> > latest bk of 2.6.0-test3 hangs with these three lines:
> >
> > ENABLING IO-APIC IRQs
> > Setting 2 in the phys_id_present_map
> > ...changing IO-APIC physical APIC ID to 2 ... ok.
> >
> > And there it stays forever. 2.6.0-test3 worked like a charm. This is a
> > Asus CUV265-DLS motherboard. Dual P3.
> >
> > Should I file a bugreport at bugzilla?
> >
> > Best regards,
> > Stian
^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: 2.6.0-test3 latest bk hangs when enabling IO-APIC
2003-08-18 19:23 ` Stian Jordet
@ 2003-08-18 20:06 ` Stian Jordet
2003-08-18 23:06 ` [SOLVED] " Stian Jordet
0 siblings, 1 reply; 6+ messages in thread
From: Stian Jordet @ 2003-08-18 20:06 UTC (permalink / raw)
To: Brown, Len; +Cc: linux-kernel
man, 18.08.2003 kl. 21.23 skrev Stian Jordet:
> man, 18.08.2003 kl. 19.53 skrev Brown, Len:
> > Try booting with pci=noacpi, and if that doesn't work acpi=off
> > If either of those work, then file in bugzilla with component=ACPI and
> > assign it to len.brown@intel.com
>
> It works when booting with noapic, but not with acpi=off nor pci=noapic.
> Does that mean I can't blame you for it?
Just to confuse myself (and whoever reading my mails). When I disabled
the second onboard ide-port, the kernel booted, but usb didn't work.
Absolutely no problem what so ever with -test3.
Best regards,
Stian
^ permalink raw reply [flat|nested] 6+ messages in thread
* [SOLVED] RE: 2.6.0-test3 latest bk hangs when enabling IO-APIC
2003-08-18 20:06 ` Stian Jordet
@ 2003-08-18 23:06 ` Stian Jordet
2003-08-18 23:12 ` Stian Jordet
0 siblings, 1 reply; 6+ messages in thread
From: Stian Jordet @ 2003-08-18 23:06 UTC (permalink / raw)
To: Brown, Len; +Cc: linux-kernel
man, 18.08.2003 kl. 22.06 skrev Stian Jordet:
> man, 18.08.2003 kl. 21.23 skrev Stian Jordet:
> > man, 18.08.2003 kl. 19.53 skrev Brown, Len:
> > > Try booting with pci=noacpi, and if that doesn't work acpi=off
> > > If either of those work, then file in bugzilla with component=ACPI and
> > > assign it to len.brown@intel.com
> >
> > It works when booting with noapic, but not with acpi=off nor pci=noapic.
> > Does that mean I can't blame you for it?
>
> Just to confuse myself (and whoever reading my mails). When I disabled
> the second onboard ide-port, the kernel booted, but usb didn't work.
> Absolutely no problem what so ever with -test3.
I had to enable CONFIG_ACPI_HT=y. But you must have screwed something
up, since my P3's really, really don't have any Hyper Threading :) ACPI
was already enabled, and from the help texts, there shouldn't be any
difference with ACPI_HT then. Nevermind, I'm happy :)
Best regards,
Stian
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [SOLVED] RE: 2.6.0-test3 latest bk hangs when enabling IO-APIC
2003-08-18 23:06 ` [SOLVED] " Stian Jordet
@ 2003-08-18 23:12 ` Stian Jordet
0 siblings, 0 replies; 6+ messages in thread
From: Stian Jordet @ 2003-08-18 23:12 UTC (permalink / raw)
To: Brown, Len; +Cc: linux-kernel
tir, 19.08.2003 kl. 01.06 skrev Stian Jordet:
> man, 18.08.2003 kl. 22.06 skrev Stian Jordet:
> > man, 18.08.2003 kl. 21.23 skrev Stian Jordet:
> > > man, 18.08.2003 kl. 19.53 skrev Brown, Len:
> > > > Try booting with pci=noacpi, and if that doesn't work acpi=off
> > > > If either of those work, then file in bugzilla with component=ACPI and
> > > > assign it to len.brown@intel.com
> > >
> > > It works when booting with noapic, but not with acpi=off nor pci=noapic.
> > > Does that mean I can't blame you for it?
> >
> > Just to confuse myself (and whoever reading my mails). When I disabled
> > the second onboard ide-port, the kernel booted, but usb didn't work.
> > Absolutely no problem what so ever with -test3.
>
> I had to enable CONFIG_ACPI_HT=y. But you must have screwed something
> up, since my P3's really, really don't have any Hyper Threading :) ACPI
> was already enabled, and from the help texts, there shouldn't be any
> difference with ACPI_HT then. Nevermind, I'm happy :)
Sorry for spamming, but when I think of it, I don't think acpi is
enabled at all without the CONFIG_ACPI_HT. Because my computer actually
uses to hang when enabling io-apic without acpi support enabled (in
other words, my pc is useless without acpi enabled).
Once again, sorry for flooding.
Best regards,
Stian
^ permalink raw reply [flat|nested] 6+ messages in thread
* 2.6.0-test3 latest bk hangs when enabling IO-APIC
@ 2003-08-18 13:09 Stian Jordet
0 siblings, 0 replies; 6+ messages in thread
From: Stian Jordet @ 2003-08-18 13:09 UTC (permalink / raw)
To: linux-kernel
Hello,
latest bk of 2.6.0-test3 hangs with these three lines:
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
And there it stays forever. 2.6.0-test3 worked like a charm. This is a
Asus CUV265-DLS motherboard. Dual P3.
Should I file a bugreport at bugzilla?
Best regards,
Stian
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2003-08-18 23:12 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-08-18 17:53 2.6.0-test3 latest bk hangs when enabling IO-APIC Brown, Len
2003-08-18 19:23 ` Stian Jordet
2003-08-18 20:06 ` Stian Jordet
2003-08-18 23:06 ` [SOLVED] " Stian Jordet
2003-08-18 23:12 ` Stian Jordet
-- strict thread matches above, loose matches on Subject: below --
2003-08-18 13:09 Stian Jordet
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).