From: Nick Dyer <nick.dyer@itdev.co.uk>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Daniel Kurtz <djkurtz@chromium.org>,
Henrik Rydberg <rydberg@euromail.se>,
Joonyoung Shim <jy0922.shim@samsung.com>,
Alan Bowens <Alan.Bowens@atmel.com>,
linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
Peter Meerwald <pmeerw@pmeerw.net>,
Benson Leung <bleung@chromium.org>,
Olof Johansson <olofj@chromium.org>,
Nick Dyer <nick.dyer@itdev.co.uk>
Subject: [PATCH 11/51] Input: atmel_mxt_ts - Implement CRC check for configuration data
Date: Thu, 27 Jun 2013 13:48:46 +0100 [thread overview]
Message-ID: <1372337366-9286-12-git-send-email-nick.dyer@itdev.co.uk> (raw)
In-Reply-To: <1372337366-9286-1-git-send-email-nick.dyer@itdev.co.uk>
The configuration is stored in NVRAM on the maXTouch chip. When the device is
reset it reports a CRC of the stored configuration values. Therefore it isn't
necessary to send the configuration on each probe - we can check the CRC
matches and avoid a timeconsuming backup/reset cycle.
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Benson Leung <bleung@chromium.org>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 55 +++++++++++++++++++++++++-----
include/linux/i2c/atmel_mxt_ts.h | 1 +
2 files changed, 48 insertions(+), 8 deletions(-)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 471bc4d..ad9fc91 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -189,6 +189,7 @@
#define MXT_BACKUP_TIME 50 /* msec */
#define MXT_RESET_TIME 200 /* msec */
#define MXT_RESET_TIMEOUT 3000 /* msec */
+#define MXT_CRC_TIMEOUT 1000 /* msec */
#define MXT_FW_RESET_TIME 3000 /* msec */
#define MXT_FW_CHG_TIMEOUT 300 /* msec */
@@ -260,6 +261,7 @@ struct mxt_data {
unsigned int max_x;
unsigned int max_y;
bool in_bootloader;
+ u32 config_crc;
/* Cached parameters from object table */
u8 T6_reportid;
@@ -274,6 +276,9 @@ struct mxt_data {
/* for reset handling */
struct completion reset_completion;
+ /* for reset handling */
+ struct completion crc_completion;
+
/* Enable reporting of input events */
bool enable_reporting;
};
@@ -648,7 +653,7 @@ static void mxt_input_touchevent(struct mxt_data *data,
}
}
-static unsigned mxt_extract_T6_csum(const u8 *csum)
+static u16 mxt_extract_T6_csum(const u8 *csum)
{
return csum[0] | (csum[1] << 8) | (csum[2] << 16);
}
@@ -666,6 +671,7 @@ static irqreturn_t mxt_process_messages_until_invalid(struct mxt_data *data)
struct device *dev = &data->client->dev;
u8 reportid;
bool update_input = false;
+ u32 crc;
do {
if (mxt_read_message(data, &message)) {
@@ -677,9 +683,15 @@ static irqreturn_t mxt_process_messages_until_invalid(struct mxt_data *data)
if (reportid == data->T6_reportid) {
u8 status = payload[0];
- unsigned csum = mxt_extract_T6_csum(&payload[1]);
+
+ crc = mxt_extract_T6_csum(&payload[1]);
+ if (crc != data->config_crc) {
+ data->config_crc = crc;
+ complete(&data->crc_completion);
+ }
+
dev_dbg(dev, "Status: %02x Config Checksum: %06x\n",
- status, csum);
+ status, data->config_crc);
if (status & MXT_T6_STATUS_RESET)
complete(&data->reset_completion);
@@ -772,6 +784,19 @@ static int mxt_soft_reset(struct mxt_data *data)
return 0;
}
+static void mxt_update_crc(struct mxt_data *data, u8 cmd, u8 value)
+{
+ /* on failure, CRC is set to 0 and config will always be downloaded */
+ data->config_crc = 0;
+ INIT_COMPLETION(data->crc_completion);
+
+ mxt_t6_command(data, cmd, value, true);
+
+ /* Wait for crc message. On failure, CRC is set to 0 and config will
+ * always be downloaded */
+ mxt_wait_for_completion(data, &data->crc_completion, MXT_CRC_TIMEOUT);
+}
+
static int mxt_check_reg_init(struct mxt_data *data)
{
const struct mxt_platform_data *pdata = data->pdata;
@@ -786,6 +811,16 @@ static int mxt_check_reg_init(struct mxt_data *data)
return 0;
}
+ mxt_update_crc(data, MXT_COMMAND_REPORTALL, 1);
+
+ if (data->config_crc == pdata->config_crc) {
+ dev_info(dev, "Config CRC 0x%06X: OK\n", data->config_crc);
+ return 0;
+ } else {
+ dev_info(dev, "Config CRC 0x%06X: does not match 0x%06X\n",
+ data->config_crc, pdata->config_crc);
+ }
+
for (i = 0; i < data->info.object_num; i++) {
object = data->object_table + i;
@@ -805,6 +840,14 @@ static int mxt_check_reg_init(struct mxt_data *data)
index += size;
}
+ mxt_update_crc(data, MXT_COMMAND_BACKUPNV, MXT_BACKUP_VALUE);
+
+ ret = mxt_soft_reset(data);
+ if (ret)
+ return ret;
+
+ dev_info(dev, "Config written\n");
+
return 0;
}
@@ -962,11 +1005,6 @@ static int mxt_initialize(struct mxt_data *data)
goto err_free_object_table;
}
- error = mxt_t6_command(data, MXT_COMMAND_BACKUPNV,
- MXT_BACKUP_VALUE, false);
- if (!error)
- mxt_soft_reset(data);
-
/* Update matrix size at info struct */
error = mxt_read_reg(client, MXT_MATRIX_X_SIZE, &val);
if (error)
@@ -1292,6 +1330,7 @@ static int mxt_probe(struct i2c_client *client,
init_completion(&data->bl_completion);
init_completion(&data->reset_completion);
+ init_completion(&data->crc_completion);
mxt_calc_resolution(data);
diff --git a/include/linux/i2c/atmel_mxt_ts.h b/include/linux/i2c/atmel_mxt_ts.h
index d26080d..9f92135 100644
--- a/include/linux/i2c/atmel_mxt_ts.h
+++ b/include/linux/i2c/atmel_mxt_ts.h
@@ -29,6 +29,7 @@
struct mxt_platform_data {
const u8 *config;
size_t config_length;
+ u32 config_crc;
unsigned int x_size;
unsigned int y_size;
--
1.7.10.4
next prev parent reply other threads:[~2013-06-27 13:04 UTC|newest]
Thread overview: 87+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-27 12:48 Atmel updates to atmel_mxt_ts touch controller driver - v6 Nick Dyer
2013-06-27 12:48 ` [PATCH 01/51] Input: atmel_mxt_ts - Remove unnecessary platform data Nick Dyer
2013-06-27 12:48 ` [PATCH 02/51] Input: atmel_mxt_ts - Improve T19 GPIO keys handling Nick Dyer
2013-07-18 17:11 ` rydberg
2013-06-27 12:48 ` [PATCH 03/51] Input: atmel_mxt_ts - Return IRQ_NONE when interrupt handler fails Nick Dyer
2013-06-27 12:48 ` [PATCH 04/51] Input: atmel_mxt_ts - define helper functions for size and instances Nick Dyer
2013-06-27 12:48 ` [PATCH 05/51] Input: atmel_mxt_ts - Select FW_LOADER for firmware code Nick Dyer
2013-06-27 12:48 ` [PATCH 06/51] Input: atmel_mxt_ts - wait for CHG assert in mxt_check_bootloader Nick Dyer
2013-06-27 12:48 ` [PATCH 07/51] Input: atmel_mxt_ts - wait for CHG after bootloader resets Nick Dyer
2013-06-27 12:48 ` [PATCH 08/51] Input: atmel_mxt_ts - Initialise IRQ before probing Nick Dyer
2013-07-18 17:13 ` rydberg
2013-06-27 12:48 ` [PATCH 09/51] Input: atmel_mxt_ts - Make wait-after-reset period compatible with all chips Nick Dyer
2013-06-27 12:48 ` [PATCH 10/51] Input: atmel_mxt_ts - Improve error reporting and debug Nick Dyer
2013-06-27 12:48 ` Nick Dyer [this message]
2013-09-18 16:59 ` [11/51] Input: atmel_mxt_ts - Implement CRC check for configuration data Martin Fuzzey
2013-06-27 12:48 ` [PATCH 12/51] Input: atmel_mxt_ts - Download device config using firmware loader Nick Dyer
2013-09-18 17:08 ` [12/51] " Martin Fuzzey
2013-06-27 12:48 ` [PATCH 13/51] Input: atmel_mxt_ts - Calculate and check CRC in config file Nick Dyer
2013-06-27 12:48 ` [PATCH 14/51] Input: atmel_mxt_ts - Add additional bootloader addresses Nick Dyer
2013-06-27 12:48 ` [PATCH 15/51] Input: atmel_mxt_ts - Read and report bootloader version Nick Dyer
2013-06-27 12:48 ` [PATCH 16/51] Input: atmel_mxt_ts - Implement bootloader frame retries Nick Dyer
2013-06-27 12:48 ` [PATCH 17/51] Input: atmel_mxt_ts - Improve bootloader progress output Nick Dyer
2013-06-27 12:48 ` [PATCH 18/51] Input: atmel_mxt_ts - Add check for incorrect firmware file format Nick Dyer
2013-06-27 12:48 ` [PATCH 19/51] Input: atmel_mxt_ts - Read screen config from chip Nick Dyer
2013-06-27 12:48 ` [PATCH 20/51] Input: atmel_mxt_ts - Set default irqflags when there is no pdata Nick Dyer
2013-07-18 17:17 ` rydberg
2013-09-16 2:25 ` Dmitry Torokhov
2014-05-22 14:29 ` Nick Dyer
2014-05-23 16:37 ` Yufeng Shen
2014-05-24 12:41 ` Nick Dyer
2014-05-26 18:17 ` Yufeng Shen
2014-05-26 5:23 ` Dmitry Torokhov
2014-05-26 18:13 ` Yufeng Shen
2013-06-27 12:48 ` [PATCH 21/51] Input: atmel_mxt_ts - Use deep sleep mode when stopped Nick Dyer
2013-06-27 12:48 ` [PATCH 22/51] Input: atmel_mxt_ts - Add shutdown function Nick Dyer
2013-07-07 5:29 ` Dmitry Torokhov
2013-07-08 9:56 ` Nick Dyer
2013-07-10 16:55 ` Dmitry Torokhov
2013-07-10 18:32 ` Nick Dyer
2013-06-27 12:48 ` [PATCH 23/51] Input: atmel_mxt_ts - Rename pressure to amplitude to match spec Nick Dyer
2013-06-27 12:48 ` [PATCH 24/51] Input: atmel_mxt_ts - Rename touchscreen defines to include T9 Nick Dyer
2013-06-27 12:49 ` [PATCH 25/51] Input: atmel_mxt_ts - Handle multiple input reports in one message Nick Dyer
2013-07-18 17:18 ` rydberg
2013-06-27 12:49 ` [PATCH 26/51] Input: atmel_mxt_ts - Move input device init into separate function Nick Dyer
2013-07-07 5:34 ` Dmitry Torokhov
2013-07-08 9:41 ` Nick Dyer
2013-07-10 16:53 ` Dmitry Torokhov
2013-07-18 17:20 ` rydberg
2013-06-27 12:49 ` [PATCH 27/51] Input: atmel_mxt_ts - Handle APP_CRC_FAIL on startup Nick Dyer
2013-06-27 12:49 ` [PATCH 28/51] Input: atmel_mxt_ts - Handle bootloader previously unlocked Nick Dyer
2013-06-27 12:49 ` [PATCH 29/51] Input: atmel_mxt_ts - Add bootloader addresses for new chips Nick Dyer
2013-06-27 12:49 ` [PATCH 30/51] Input: atmel_mxt_ts - Recover from bootloader on probe Nick Dyer
2013-06-27 12:49 ` [PATCH 31/51] Input: atmel_mxt_ts - Add support for dynamic message size Nick Dyer
2013-06-27 12:49 ` [PATCH 32/51] Input: atmel_mxt_ts - Decode T6 status messages Nick Dyer
2013-06-27 12:49 ` [PATCH 33/51] Input: atmel_mxt_ts - Split message handler into separate functions Nick Dyer
2013-06-27 12:49 ` [PATCH 34/51] Input: atmel_mxt_ts - Implement T44 message handling Nick Dyer
2013-06-27 12:49 ` [PATCH 35/51] Input: atmel_mxt_ts - Output status from T48 Noise Supression Nick Dyer
2013-06-27 12:49 ` [PATCH 36/51] Input: atmel_mxt_ts - Output status from T42 Touch Suppression Nick Dyer
2013-06-27 12:49 ` [PATCH 37/51] Input: atmel_mxt_ts - Implement vector/orientation support Nick Dyer
2013-07-18 17:20 ` rydberg
2013-08-15 16:18 ` Nick Dyer
2013-06-27 12:49 ` [PATCH 38/51] Input: atmel_mxt_ts - implement I2C retries Nick Dyer
2013-06-27 12:49 ` [PATCH 39/51] Input: atmel_mxt_ts - Implement T63 Active Stylus support Nick Dyer
2013-07-18 17:21 ` rydberg
2013-06-27 12:49 ` [PATCH 40/51] Input: atmel_mxt_ts - Implement support for T15 Key Array Nick Dyer
2013-06-27 12:49 ` [PATCH 41/51] Input: atmel_mxt_ts - Remove unused defines Nick Dyer
2013-06-27 12:49 ` [PATCH 42/51] Input: atmel_mxt_ts - Verify Information Block checksum on probe Nick Dyer
2013-06-27 12:49 ` [PATCH 43/51] Input: atmel_mxt_ts - Use T18 RETRIGEN to handle IRQF_TRIGGER_LOW Nick Dyer
2013-06-27 12:49 ` [PATCH 44/51] Input: atmel_mxt_ts - Handle reports from T47 Stylus object Nick Dyer
2013-07-18 17:23 ` rydberg
2013-06-27 12:49 ` [PATCH 45/51] Input: atmel_mxt_ts - Release touch state during suspend Nick Dyer
2013-07-18 17:29 ` rydberg
2013-08-15 15:52 ` Nick Dyer
2013-06-27 12:49 ` [PATCH 46/51] Input: atmel_mxt_ts - Initialize power config before and after downloading cfg Nick Dyer
2013-06-27 12:49 ` [PATCH 47/51] Input: atmel_mxt_ts - Add regulator control support Nick Dyer
2013-06-27 12:49 ` [PATCH 48/51] Input: atmel_mxt_ts - Implement support for T100 touch object Nick Dyer
2013-06-27 12:49 ` [PATCH 49/51] Input: atmel_mxt_ts - Allow specification of firmware file name Nick Dyer
2013-06-27 12:49 ` [PATCH 50/51] Input: atmel_mxt_ts - Handle cfg filename via pdata/sysfs Nick Dyer
2013-06-27 12:49 ` [PATCH 51/51] Input: atmel_mxt_ts - Only use first T9 instance Nick Dyer
2013-06-27 15:17 ` Atmel updates to atmel_mxt_ts touch controller driver - v6 Nick Dyer
2013-07-18 19:47 ` rydberg
2013-08-15 15:55 ` Nick Dyer
2013-08-15 16:07 ` Dmitry Torokhov
2013-08-19 14:24 ` Nick Dyer
2013-09-10 13:58 ` Nick Dyer
[not found] ` <CAPDwgkOo7FYLujk16kJM=BqmXRKvZ2S_LOYURW0cXT5t=cmi6w@mail.gmail.com>
2014-01-15 10:44 ` Nick Dyer
[not found] ` <CAPDwgkOsP4K7r0-Mo-U52X9knRbGgbuD4dGptmj3x-LMTN75BA@mail.gmail.com>
2014-01-17 20:01 ` Nick Dyer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1372337366-9286-12-git-send-email-nick.dyer@itdev.co.uk \
--to=nick.dyer@itdev.co.uk \
--cc=Alan.Bowens@atmel.com \
--cc=bleung@chromium.org \
--cc=djkurtz@chromium.org \
--cc=dmitry.torokhov@gmail.com \
--cc=jy0922.shim@samsung.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=olofj@chromium.org \
--cc=pmeerw@pmeerw.net \
--cc=rydberg@euromail.se \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).