From: Nick Dyer <nick.dyer@itdev.co.uk>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Daniel Kurtz <djkurtz@chromium.org>,
Henrik Rydberg <rydberg@euromail.se>,
Joonyoung Shim <jy0922.shim@samsung.com>,
Alan Bowens <Alan.Bowens@atmel.com>,
linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
Peter Meerwald <pmeerw@pmeerw.net>,
Benson Leung <bleung@chromium.org>,
Olof Johansson <olofj@chromium.org>,
Nick Dyer <nick.dyer@itdev.co.uk>
Subject: [PATCH 38/51] Input: atmel_mxt_ts - implement I2C retries
Date: Thu, 27 Jun 2013 13:49:13 +0100 [thread overview]
Message-ID: <1372337366-9286-39-git-send-email-nick.dyer@itdev.co.uk> (raw)
In-Reply-To: <1372337366-9286-1-git-send-email-nick.dyer@itdev.co.uk>
Some maXTouch chips (eg mXT1386) will not respond on the first I2C request
when they are in a sleep state. It must be retried after a delay for the chip
to wake up.
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 45 ++++++++++++++++++++----------
1 file changed, 30 insertions(+), 15 deletions(-)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 9188cf7..b63f227 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -197,6 +197,7 @@ struct t9_range {
#define MXT_CRC_TIMEOUT 1000 /* msec */
#define MXT_FW_RESET_TIME 3000 /* msec */
#define MXT_FW_CHG_TIMEOUT 300 /* msec */
+#define MXT_WAKEUP_TIME 25 /* msec */
/* Command to unlock bootloader */
#define MXT_UNLOCK_CMD_MSB 0xaa
@@ -567,6 +568,7 @@ static int __mxt_read_reg(struct i2c_client *client,
struct i2c_msg xfer[2];
u8 buf[2];
int ret;
+ bool retry = false;
buf[0] = reg & 0xff;
buf[1] = (reg >> 8) & 0xff;
@@ -583,17 +585,22 @@ static int __mxt_read_reg(struct i2c_client *client,
xfer[1].len = len;
xfer[1].buf = val;
- ret = i2c_transfer(client->adapter, xfer, 2);
- if (ret == 2) {
- ret = 0;
- } else {
- if (ret >= 0)
- ret = -EIO;
- dev_err(&client->dev, "%s: i2c transfer failed (%d)\n",
- __func__, ret);
+retry_read:
+ ret = i2c_transfer(client->adapter, xfer, ARRAY_SIZE(xfer));
+ if (ret != ARRAY_SIZE(xfer)) {
+ if (!retry) {
+ dev_dbg(&client->dev, "%s: i2c retry\n", __func__);
+ msleep(MXT_WAKEUP_TIME);
+ retry = true;
+ goto retry_read;
+ } else {
+ dev_err(&client->dev, "%s: i2c transfer failed (%d)\n",
+ __func__, ret);
+ return -EIO;
+ }
}
- return ret;
+ return 0;
}
static int __mxt_write_reg(struct i2c_client *client, u16 reg, u16 len,
@@ -602,6 +609,7 @@ static int __mxt_write_reg(struct i2c_client *client, u16 reg, u16 len,
u8 *buf;
size_t count;
int ret;
+ bool retry = false;
count = len + 2;
buf = kmalloc(count, GFP_KERNEL);
@@ -612,14 +620,21 @@ static int __mxt_write_reg(struct i2c_client *client, u16 reg, u16 len,
buf[1] = (reg >> 8) & 0xff;
memcpy(&buf[2], val, len);
+retry_write:
ret = i2c_master_send(client, buf, count);
- if (ret == count) {
- ret = 0;
- } else {
- if (ret >= 0)
+ if (ret != count) {
+ if (!retry) {
+ dev_dbg(&client->dev, "%s: i2c retry\n", __func__);
+ msleep(MXT_WAKEUP_TIME);
+ retry = true;
+ goto retry_write;
+ } else {
+ dev_err(&client->dev, "%s: i2c send failed (%d)\n",
+ __func__, ret);
ret = -EIO;
- dev_err(&client->dev, "%s: i2c send failed (%d)\n",
- __func__, ret);
+ }
+ } else {
+ ret = 0;
}
kfree(buf);
--
1.7.10.4
next prev parent reply other threads:[~2013-06-27 12:50 UTC|newest]
Thread overview: 87+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-27 12:48 Atmel updates to atmel_mxt_ts touch controller driver - v6 Nick Dyer
2013-06-27 12:48 ` [PATCH 01/51] Input: atmel_mxt_ts - Remove unnecessary platform data Nick Dyer
2013-06-27 12:48 ` [PATCH 02/51] Input: atmel_mxt_ts - Improve T19 GPIO keys handling Nick Dyer
2013-07-18 17:11 ` rydberg
2013-06-27 12:48 ` [PATCH 03/51] Input: atmel_mxt_ts - Return IRQ_NONE when interrupt handler fails Nick Dyer
2013-06-27 12:48 ` [PATCH 04/51] Input: atmel_mxt_ts - define helper functions for size and instances Nick Dyer
2013-06-27 12:48 ` [PATCH 05/51] Input: atmel_mxt_ts - Select FW_LOADER for firmware code Nick Dyer
2013-06-27 12:48 ` [PATCH 06/51] Input: atmel_mxt_ts - wait for CHG assert in mxt_check_bootloader Nick Dyer
2013-06-27 12:48 ` [PATCH 07/51] Input: atmel_mxt_ts - wait for CHG after bootloader resets Nick Dyer
2013-06-27 12:48 ` [PATCH 08/51] Input: atmel_mxt_ts - Initialise IRQ before probing Nick Dyer
2013-07-18 17:13 ` rydberg
2013-06-27 12:48 ` [PATCH 09/51] Input: atmel_mxt_ts - Make wait-after-reset period compatible with all chips Nick Dyer
2013-06-27 12:48 ` [PATCH 10/51] Input: atmel_mxt_ts - Improve error reporting and debug Nick Dyer
2013-06-27 12:48 ` [PATCH 11/51] Input: atmel_mxt_ts - Implement CRC check for configuration data Nick Dyer
2013-09-18 16:59 ` [11/51] " Martin Fuzzey
2013-06-27 12:48 ` [PATCH 12/51] Input: atmel_mxt_ts - Download device config using firmware loader Nick Dyer
2013-09-18 17:08 ` [12/51] " Martin Fuzzey
2013-06-27 12:48 ` [PATCH 13/51] Input: atmel_mxt_ts - Calculate and check CRC in config file Nick Dyer
2013-06-27 12:48 ` [PATCH 14/51] Input: atmel_mxt_ts - Add additional bootloader addresses Nick Dyer
2013-06-27 12:48 ` [PATCH 15/51] Input: atmel_mxt_ts - Read and report bootloader version Nick Dyer
2013-06-27 12:48 ` [PATCH 16/51] Input: atmel_mxt_ts - Implement bootloader frame retries Nick Dyer
2013-06-27 12:48 ` [PATCH 17/51] Input: atmel_mxt_ts - Improve bootloader progress output Nick Dyer
2013-06-27 12:48 ` [PATCH 18/51] Input: atmel_mxt_ts - Add check for incorrect firmware file format Nick Dyer
2013-06-27 12:48 ` [PATCH 19/51] Input: atmel_mxt_ts - Read screen config from chip Nick Dyer
2013-06-27 12:48 ` [PATCH 20/51] Input: atmel_mxt_ts - Set default irqflags when there is no pdata Nick Dyer
2013-07-18 17:17 ` rydberg
2013-09-16 2:25 ` Dmitry Torokhov
2014-05-22 14:29 ` Nick Dyer
2014-05-23 16:37 ` Yufeng Shen
2014-05-24 12:41 ` Nick Dyer
2014-05-26 18:17 ` Yufeng Shen
2014-05-26 5:23 ` Dmitry Torokhov
2014-05-26 18:13 ` Yufeng Shen
2013-06-27 12:48 ` [PATCH 21/51] Input: atmel_mxt_ts - Use deep sleep mode when stopped Nick Dyer
2013-06-27 12:48 ` [PATCH 22/51] Input: atmel_mxt_ts - Add shutdown function Nick Dyer
2013-07-07 5:29 ` Dmitry Torokhov
2013-07-08 9:56 ` Nick Dyer
2013-07-10 16:55 ` Dmitry Torokhov
2013-07-10 18:32 ` Nick Dyer
2013-06-27 12:48 ` [PATCH 23/51] Input: atmel_mxt_ts - Rename pressure to amplitude to match spec Nick Dyer
2013-06-27 12:48 ` [PATCH 24/51] Input: atmel_mxt_ts - Rename touchscreen defines to include T9 Nick Dyer
2013-06-27 12:49 ` [PATCH 25/51] Input: atmel_mxt_ts - Handle multiple input reports in one message Nick Dyer
2013-07-18 17:18 ` rydberg
2013-06-27 12:49 ` [PATCH 26/51] Input: atmel_mxt_ts - Move input device init into separate function Nick Dyer
2013-07-07 5:34 ` Dmitry Torokhov
2013-07-08 9:41 ` Nick Dyer
2013-07-10 16:53 ` Dmitry Torokhov
2013-07-18 17:20 ` rydberg
2013-06-27 12:49 ` [PATCH 27/51] Input: atmel_mxt_ts - Handle APP_CRC_FAIL on startup Nick Dyer
2013-06-27 12:49 ` [PATCH 28/51] Input: atmel_mxt_ts - Handle bootloader previously unlocked Nick Dyer
2013-06-27 12:49 ` [PATCH 29/51] Input: atmel_mxt_ts - Add bootloader addresses for new chips Nick Dyer
2013-06-27 12:49 ` [PATCH 30/51] Input: atmel_mxt_ts - Recover from bootloader on probe Nick Dyer
2013-06-27 12:49 ` [PATCH 31/51] Input: atmel_mxt_ts - Add support for dynamic message size Nick Dyer
2013-06-27 12:49 ` [PATCH 32/51] Input: atmel_mxt_ts - Decode T6 status messages Nick Dyer
2013-06-27 12:49 ` [PATCH 33/51] Input: atmel_mxt_ts - Split message handler into separate functions Nick Dyer
2013-06-27 12:49 ` [PATCH 34/51] Input: atmel_mxt_ts - Implement T44 message handling Nick Dyer
2013-06-27 12:49 ` [PATCH 35/51] Input: atmel_mxt_ts - Output status from T48 Noise Supression Nick Dyer
2013-06-27 12:49 ` [PATCH 36/51] Input: atmel_mxt_ts - Output status from T42 Touch Suppression Nick Dyer
2013-06-27 12:49 ` [PATCH 37/51] Input: atmel_mxt_ts - Implement vector/orientation support Nick Dyer
2013-07-18 17:20 ` rydberg
2013-08-15 16:18 ` Nick Dyer
2013-06-27 12:49 ` Nick Dyer [this message]
2013-06-27 12:49 ` [PATCH 39/51] Input: atmel_mxt_ts - Implement T63 Active Stylus support Nick Dyer
2013-07-18 17:21 ` rydberg
2013-06-27 12:49 ` [PATCH 40/51] Input: atmel_mxt_ts - Implement support for T15 Key Array Nick Dyer
2013-06-27 12:49 ` [PATCH 41/51] Input: atmel_mxt_ts - Remove unused defines Nick Dyer
2013-06-27 12:49 ` [PATCH 42/51] Input: atmel_mxt_ts - Verify Information Block checksum on probe Nick Dyer
2013-06-27 12:49 ` [PATCH 43/51] Input: atmel_mxt_ts - Use T18 RETRIGEN to handle IRQF_TRIGGER_LOW Nick Dyer
2013-06-27 12:49 ` [PATCH 44/51] Input: atmel_mxt_ts - Handle reports from T47 Stylus object Nick Dyer
2013-07-18 17:23 ` rydberg
2013-06-27 12:49 ` [PATCH 45/51] Input: atmel_mxt_ts - Release touch state during suspend Nick Dyer
2013-07-18 17:29 ` rydberg
2013-08-15 15:52 ` Nick Dyer
2013-06-27 12:49 ` [PATCH 46/51] Input: atmel_mxt_ts - Initialize power config before and after downloading cfg Nick Dyer
2013-06-27 12:49 ` [PATCH 47/51] Input: atmel_mxt_ts - Add regulator control support Nick Dyer
2013-06-27 12:49 ` [PATCH 48/51] Input: atmel_mxt_ts - Implement support for T100 touch object Nick Dyer
2013-06-27 12:49 ` [PATCH 49/51] Input: atmel_mxt_ts - Allow specification of firmware file name Nick Dyer
2013-06-27 12:49 ` [PATCH 50/51] Input: atmel_mxt_ts - Handle cfg filename via pdata/sysfs Nick Dyer
2013-06-27 12:49 ` [PATCH 51/51] Input: atmel_mxt_ts - Only use first T9 instance Nick Dyer
2013-06-27 15:17 ` Atmel updates to atmel_mxt_ts touch controller driver - v6 Nick Dyer
2013-07-18 19:47 ` rydberg
2013-08-15 15:55 ` Nick Dyer
2013-08-15 16:07 ` Dmitry Torokhov
2013-08-19 14:24 ` Nick Dyer
2013-09-10 13:58 ` Nick Dyer
[not found] ` <CAPDwgkOo7FYLujk16kJM=BqmXRKvZ2S_LOYURW0cXT5t=cmi6w@mail.gmail.com>
2014-01-15 10:44 ` Nick Dyer
[not found] ` <CAPDwgkOsP4K7r0-Mo-U52X9knRbGgbuD4dGptmj3x-LMTN75BA@mail.gmail.com>
2014-01-17 20:01 ` Nick Dyer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1372337366-9286-39-git-send-email-nick.dyer@itdev.co.uk \
--to=nick.dyer@itdev.co.uk \
--cc=Alan.Bowens@atmel.com \
--cc=bleung@chromium.org \
--cc=djkurtz@chromium.org \
--cc=dmitry.torokhov@gmail.com \
--cc=jy0922.shim@samsung.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=olofj@chromium.org \
--cc=pmeerw@pmeerw.net \
--cc=rydberg@euromail.se \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).