From: rydberg@euromail.se
To: Nick Dyer <nick.dyer@itdev.co.uk>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Daniel Kurtz <djkurtz@chromium.org>,
Joonyoung Shim <jy0922.shim@samsung.com>,
Alan Bowens <Alan.Bowens@atmel.com>,
linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
Peter Meerwald <pmeerw@pmeerw.net>,
Benson Leung <bleung@chromium.org>,
Olof Johansson <olofj@chromium.org>
Subject: Re: [PATCH 26/51] Input: atmel_mxt_ts - Move input device init into separate function
Date: Thu, 18 Jul 2013 19:20:07 +0200 [thread overview]
Message-ID: <20130718172007.GE32381@polaris.bitmath.org> (raw)
In-Reply-To: <1372337366-9286-27-git-send-email-nick.dyer@itdev.co.uk>
On Thu, Jun 27, 2013 at 01:49:01PM +0100, Nick Dyer wrote:
> Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
> ---
> drivers/input/touchscreen/atmel_mxt_ts.c | 129 +++++++++++++++++-------------
> 1 file changed, 75 insertions(+), 54 deletions(-)
>
> diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
> index 8632133..030ebc5 100644
> --- a/drivers/input/touchscreen/atmel_mxt_ts.c
> +++ b/drivers/input/touchscreen/atmel_mxt_ts.c
> @@ -1728,73 +1728,39 @@ static int mxt_handle_pdata(struct mxt_data *data)
> return 0;
> }
>
> -static int mxt_probe(struct i2c_client *client,
> - const struct i2c_device_id *id)
> +static int mxt_initialize_t9_input_device(struct mxt_data *data)
> {
> - struct mxt_data *data;
> + struct device *dev = &data->client->dev;
> + const struct mxt_platform_data *pdata = data->pdata;
Similar code was removed from mxt_initialize(), some consistency would be nice.
> struct input_dev *input_dev;
> int error;
> unsigned int num_mt_slots;
> unsigned int mt_flags = 0;
> int i;
>
> - data = kzalloc(sizeof(struct mxt_data), GFP_KERNEL);
> input_dev = input_allocate_device();
> - if (!data || !input_dev) {
> - dev_err(&client->dev, "Failed to allocate memory\n");
> - error = -ENOMEM;
> - goto err_free_mem;
> + if (!input_dev) {
> + dev_err(dev, "Failed to allocate memory\n");
> + return -ENOMEM;
> }
>
> input_dev->name = "Atmel maXTouch Touchscreen";
> - snprintf(data->phys, sizeof(data->phys), "i2c-%u-%04x/input0",
> - client->adapter->nr, client->addr);
> -
> input_dev->phys = data->phys;
> -
> input_dev->id.bustype = BUS_I2C;
> - input_dev->dev.parent = &client->dev;
> + input_dev->dev.parent = dev;
> input_dev->open = mxt_input_open;
> input_dev->close = mxt_input_close;
>
> - data->client = client;
> - data->input_dev = input_dev;
> - data->irq = client->irq;
> - i2c_set_clientdata(client, data);
> -
> - error = mxt_handle_pdata(data);
> - if (error)
> - goto err_free_mem;
> -
> - init_completion(&data->bl_completion);
> - init_completion(&data->reset_completion);
> - init_completion(&data->crc_completion);
> -
> - error = request_threaded_irq(data->irq, NULL, mxt_interrupt,
> - data->pdata->irqflags | IRQF_ONESHOT,
> - client->name, data);
> - if (error) {
> - dev_err(&client->dev, "Failed to register interrupt\n");
> - goto err_free_pdata;
> - }
> -
> - disable_irq(client->irq);
> -
> - error = mxt_initialize(data);
> - if (error)
> - goto err_free_irq;
> -
> __set_bit(EV_ABS, input_dev->evbit);
> - __set_bit(EV_KEY, input_dev->evbit);
> - __set_bit(BTN_TOUCH, input_dev->keybit);
> + input_set_capability(input_dev, EV_KEY, BTN_TOUCH);
>
> - if (data->pdata->t19_num_keys) {
> + if (pdata->t19_num_keys) {
> __set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit);
>
> - for (i = 0; i < data->pdata->t19_num_keys; i++)
> - if (data->pdata->t19_keymap[i] != KEY_RESERVED)
> + for (i = 0; i < pdata->t19_num_keys; i++)
> + if (pdata->t19_keymap[i] != KEY_RESERVED)
> input_set_capability(input_dev, EV_KEY,
> - data->pdata->t19_keymap[i]);
> + pdata->t19_keymap[i]);
>
> mt_flags |= INPUT_MT_POINTER;
>
> @@ -1819,8 +1785,11 @@ static int mxt_probe(struct i2c_client *client,
> /* For multi touch */
> num_mt_slots = data->T9_reportid_max - data->T9_reportid_min + 1;
> error = input_mt_init_slots(input_dev, num_mt_slots, mt_flags);
> - if (error)
> - goto err_free_object;
> + if (error) {
> + dev_err(dev, "Error %d initialising slots\n", error);
> + goto err_free_mem;
> + }
> +
> input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
> 0, MXT_MAX_AREA, 0, 0);
> input_set_abs_params(input_dev, ABS_MT_POSITION_X,
> @@ -1834,11 +1803,64 @@ static int mxt_probe(struct i2c_client *client,
>
> error = input_register_device(input_dev);
> if (error) {
> - dev_err(&client->dev, "Error %d registering input device\n",
> - error);
> - goto err_free_object;
> + dev_err(dev, "Error %d registering input device\n", error);
> + goto err_free_mem;
> }
>
> + data->input_dev = input_dev;
> +
> + return 0;
> +
> +err_free_mem:
> + input_free_device(input_dev);
> + return error;
> +}
> +
> +static int mxt_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct mxt_data *data;
> + int error;
> +
> + data = kzalloc(sizeof(struct mxt_data), GFP_KERNEL);
> + if (!data) {
> + dev_err(&client->dev, "Failed to allocate memory\n");
> + return -ENOMEM;
> + }
> +
> + snprintf(data->phys, sizeof(data->phys), "i2c-%u-%04x/input0",
> + client->adapter->nr, client->addr);
> +
> + data->client = client;
> + data->irq = client->irq;
> + i2c_set_clientdata(client, data);
> +
> + error = mxt_handle_pdata(data);
> + if (error)
> + goto err_free_mem;
> +
> + init_completion(&data->bl_completion);
> + init_completion(&data->reset_completion);
> + init_completion(&data->crc_completion);
> +
> + error = request_threaded_irq(data->irq, NULL, mxt_interrupt,
> + data->pdata->irqflags | IRQF_ONESHOT,
> + client->name, data);
> + if (error) {
> + dev_err(&client->dev, "Failed to register interrupt\n");
> + goto err_free_pdata;
> + }
> +
> + disable_irq(data->irq);
> +
> + error = mxt_initialize(data);
> + if (error)
> + goto err_free_irq;
> +
> + error = mxt_initialize_t9_input_device(data);
> + if (error)
> + goto err_free_object;
> +
> error = sysfs_create_group(&client->dev.kobj, &mxt_attr_group);
> if (error) {
> dev_err(&client->dev, "Failure %d creating sysfs group\n",
> @@ -1849,8 +1871,8 @@ static int mxt_probe(struct i2c_client *client,
> return 0;
>
> err_unregister_device:
> - input_unregister_device(input_dev);
> - input_dev = NULL;
> + input_unregister_device(data->input_dev);
> + data->input_dev = NULL;
> err_free_object:
> kfree(data->object_table);
> err_free_irq:
> @@ -1859,7 +1881,6 @@ err_free_pdata:
> if (!dev_get_platdata(&data->client->dev))
> kfree(data->pdata);
> err_free_mem:
> - input_free_device(input_dev);
> kfree(data);
> return error;
> }
> --
> 1.7.10.4
>
In what way does this patch simplify things?
Thanks,
Henrik
next prev parent reply other threads:[~2013-07-18 17:18 UTC|newest]
Thread overview: 87+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-27 12:48 Atmel updates to atmel_mxt_ts touch controller driver - v6 Nick Dyer
2013-06-27 12:48 ` [PATCH 01/51] Input: atmel_mxt_ts - Remove unnecessary platform data Nick Dyer
2013-06-27 12:48 ` [PATCH 02/51] Input: atmel_mxt_ts - Improve T19 GPIO keys handling Nick Dyer
2013-07-18 17:11 ` rydberg
2013-06-27 12:48 ` [PATCH 03/51] Input: atmel_mxt_ts - Return IRQ_NONE when interrupt handler fails Nick Dyer
2013-06-27 12:48 ` [PATCH 04/51] Input: atmel_mxt_ts - define helper functions for size and instances Nick Dyer
2013-06-27 12:48 ` [PATCH 05/51] Input: atmel_mxt_ts - Select FW_LOADER for firmware code Nick Dyer
2013-06-27 12:48 ` [PATCH 06/51] Input: atmel_mxt_ts - wait for CHG assert in mxt_check_bootloader Nick Dyer
2013-06-27 12:48 ` [PATCH 07/51] Input: atmel_mxt_ts - wait for CHG after bootloader resets Nick Dyer
2013-06-27 12:48 ` [PATCH 08/51] Input: atmel_mxt_ts - Initialise IRQ before probing Nick Dyer
2013-07-18 17:13 ` rydberg
2013-06-27 12:48 ` [PATCH 09/51] Input: atmel_mxt_ts - Make wait-after-reset period compatible with all chips Nick Dyer
2013-06-27 12:48 ` [PATCH 10/51] Input: atmel_mxt_ts - Improve error reporting and debug Nick Dyer
2013-06-27 12:48 ` [PATCH 11/51] Input: atmel_mxt_ts - Implement CRC check for configuration data Nick Dyer
2013-09-18 16:59 ` [11/51] " Martin Fuzzey
2013-06-27 12:48 ` [PATCH 12/51] Input: atmel_mxt_ts - Download device config using firmware loader Nick Dyer
2013-09-18 17:08 ` [12/51] " Martin Fuzzey
2013-06-27 12:48 ` [PATCH 13/51] Input: atmel_mxt_ts - Calculate and check CRC in config file Nick Dyer
2013-06-27 12:48 ` [PATCH 14/51] Input: atmel_mxt_ts - Add additional bootloader addresses Nick Dyer
2013-06-27 12:48 ` [PATCH 15/51] Input: atmel_mxt_ts - Read and report bootloader version Nick Dyer
2013-06-27 12:48 ` [PATCH 16/51] Input: atmel_mxt_ts - Implement bootloader frame retries Nick Dyer
2013-06-27 12:48 ` [PATCH 17/51] Input: atmel_mxt_ts - Improve bootloader progress output Nick Dyer
2013-06-27 12:48 ` [PATCH 18/51] Input: atmel_mxt_ts - Add check for incorrect firmware file format Nick Dyer
2013-06-27 12:48 ` [PATCH 19/51] Input: atmel_mxt_ts - Read screen config from chip Nick Dyer
2013-06-27 12:48 ` [PATCH 20/51] Input: atmel_mxt_ts - Set default irqflags when there is no pdata Nick Dyer
2013-07-18 17:17 ` rydberg
2013-09-16 2:25 ` Dmitry Torokhov
2014-05-22 14:29 ` Nick Dyer
2014-05-23 16:37 ` Yufeng Shen
2014-05-24 12:41 ` Nick Dyer
2014-05-26 18:17 ` Yufeng Shen
2014-05-26 5:23 ` Dmitry Torokhov
2014-05-26 18:13 ` Yufeng Shen
2013-06-27 12:48 ` [PATCH 21/51] Input: atmel_mxt_ts - Use deep sleep mode when stopped Nick Dyer
2013-06-27 12:48 ` [PATCH 22/51] Input: atmel_mxt_ts - Add shutdown function Nick Dyer
2013-07-07 5:29 ` Dmitry Torokhov
2013-07-08 9:56 ` Nick Dyer
2013-07-10 16:55 ` Dmitry Torokhov
2013-07-10 18:32 ` Nick Dyer
2013-06-27 12:48 ` [PATCH 23/51] Input: atmel_mxt_ts - Rename pressure to amplitude to match spec Nick Dyer
2013-06-27 12:48 ` [PATCH 24/51] Input: atmel_mxt_ts - Rename touchscreen defines to include T9 Nick Dyer
2013-06-27 12:49 ` [PATCH 25/51] Input: atmel_mxt_ts - Handle multiple input reports in one message Nick Dyer
2013-07-18 17:18 ` rydberg
2013-06-27 12:49 ` [PATCH 26/51] Input: atmel_mxt_ts - Move input device init into separate function Nick Dyer
2013-07-07 5:34 ` Dmitry Torokhov
2013-07-08 9:41 ` Nick Dyer
2013-07-10 16:53 ` Dmitry Torokhov
2013-07-18 17:20 ` rydberg [this message]
2013-06-27 12:49 ` [PATCH 27/51] Input: atmel_mxt_ts - Handle APP_CRC_FAIL on startup Nick Dyer
2013-06-27 12:49 ` [PATCH 28/51] Input: atmel_mxt_ts - Handle bootloader previously unlocked Nick Dyer
2013-06-27 12:49 ` [PATCH 29/51] Input: atmel_mxt_ts - Add bootloader addresses for new chips Nick Dyer
2013-06-27 12:49 ` [PATCH 30/51] Input: atmel_mxt_ts - Recover from bootloader on probe Nick Dyer
2013-06-27 12:49 ` [PATCH 31/51] Input: atmel_mxt_ts - Add support for dynamic message size Nick Dyer
2013-06-27 12:49 ` [PATCH 32/51] Input: atmel_mxt_ts - Decode T6 status messages Nick Dyer
2013-06-27 12:49 ` [PATCH 33/51] Input: atmel_mxt_ts - Split message handler into separate functions Nick Dyer
2013-06-27 12:49 ` [PATCH 34/51] Input: atmel_mxt_ts - Implement T44 message handling Nick Dyer
2013-06-27 12:49 ` [PATCH 35/51] Input: atmel_mxt_ts - Output status from T48 Noise Supression Nick Dyer
2013-06-27 12:49 ` [PATCH 36/51] Input: atmel_mxt_ts - Output status from T42 Touch Suppression Nick Dyer
2013-06-27 12:49 ` [PATCH 37/51] Input: atmel_mxt_ts - Implement vector/orientation support Nick Dyer
2013-07-18 17:20 ` rydberg
2013-08-15 16:18 ` Nick Dyer
2013-06-27 12:49 ` [PATCH 38/51] Input: atmel_mxt_ts - implement I2C retries Nick Dyer
2013-06-27 12:49 ` [PATCH 39/51] Input: atmel_mxt_ts - Implement T63 Active Stylus support Nick Dyer
2013-07-18 17:21 ` rydberg
2013-06-27 12:49 ` [PATCH 40/51] Input: atmel_mxt_ts - Implement support for T15 Key Array Nick Dyer
2013-06-27 12:49 ` [PATCH 41/51] Input: atmel_mxt_ts - Remove unused defines Nick Dyer
2013-06-27 12:49 ` [PATCH 42/51] Input: atmel_mxt_ts - Verify Information Block checksum on probe Nick Dyer
2013-06-27 12:49 ` [PATCH 43/51] Input: atmel_mxt_ts - Use T18 RETRIGEN to handle IRQF_TRIGGER_LOW Nick Dyer
2013-06-27 12:49 ` [PATCH 44/51] Input: atmel_mxt_ts - Handle reports from T47 Stylus object Nick Dyer
2013-07-18 17:23 ` rydberg
2013-06-27 12:49 ` [PATCH 45/51] Input: atmel_mxt_ts - Release touch state during suspend Nick Dyer
2013-07-18 17:29 ` rydberg
2013-08-15 15:52 ` Nick Dyer
2013-06-27 12:49 ` [PATCH 46/51] Input: atmel_mxt_ts - Initialize power config before and after downloading cfg Nick Dyer
2013-06-27 12:49 ` [PATCH 47/51] Input: atmel_mxt_ts - Add regulator control support Nick Dyer
2013-06-27 12:49 ` [PATCH 48/51] Input: atmel_mxt_ts - Implement support for T100 touch object Nick Dyer
2013-06-27 12:49 ` [PATCH 49/51] Input: atmel_mxt_ts - Allow specification of firmware file name Nick Dyer
2013-06-27 12:49 ` [PATCH 50/51] Input: atmel_mxt_ts - Handle cfg filename via pdata/sysfs Nick Dyer
2013-06-27 12:49 ` [PATCH 51/51] Input: atmel_mxt_ts - Only use first T9 instance Nick Dyer
2013-06-27 15:17 ` Atmel updates to atmel_mxt_ts touch controller driver - v6 Nick Dyer
2013-07-18 19:47 ` rydberg
2013-08-15 15:55 ` Nick Dyer
2013-08-15 16:07 ` Dmitry Torokhov
2013-08-19 14:24 ` Nick Dyer
2013-09-10 13:58 ` Nick Dyer
[not found] ` <CAPDwgkOo7FYLujk16kJM=BqmXRKvZ2S_LOYURW0cXT5t=cmi6w@mail.gmail.com>
2014-01-15 10:44 ` Nick Dyer
[not found] ` <CAPDwgkOsP4K7r0-Mo-U52X9knRbGgbuD4dGptmj3x-LMTN75BA@mail.gmail.com>
2014-01-17 20:01 ` Nick Dyer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130718172007.GE32381@polaris.bitmath.org \
--to=rydberg@euromail.se \
--cc=Alan.Bowens@atmel.com \
--cc=bleung@chromium.org \
--cc=djkurtz@chromium.org \
--cc=dmitry.torokhov@gmail.com \
--cc=jy0922.shim@samsung.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nick.dyer@itdev.co.uk \
--cc=olofj@chromium.org \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).