linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Scott Branden <sbranden@broadcom.com>
To: Christian Daudt <bcm@fixthebug.org>,
	Matt Porter <mporter@linaro.org>,
	Russell King <linux@arm.linux.org.uk>,
	<bcm-kernel-feedback-list@broadcom.com>,
	Mike Turquette <mturquette@linaro.org>,
	Alex Elder <elder@linaro.org>, Rob Herring <robh+dt@kernel.org>,
	Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	"Kumar Gala" <galak@codeaurora.org>,
	Andrew Morton <akpm@linux-foundation.org>,
	"David S. Miller" <davem@davemloft.net>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Joe Perches <joe@perches.com>,
	"Mauro Carvalho Chehab" <m.chehab@samsung.com>,
	Antti Palosaari <crope@iki.fi>
Cc: JD Zheng <jdzheng@broadcom.com>, Ray Jui <rjui@broadcom.com>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
	Scott Branden <sbranden@broadcom.com>
Subject: [PATCH v5 4/6] ARM: dts: Enable Broadcom Cygnus SoC
Date: Tue, 14 Oct 2014 19:58:54 -0700	[thread overview]
Message-ID: <1413341936-17606-5-git-send-email-sbranden@broadcom.com> (raw)
In-Reply-To: <1413341936-17606-1-git-send-email-sbranden@broadcom.com>

DT files to enable cygnus consisting on reference designs
and cygnus core configuration.

Reviewed-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Arun Parameswaran <aparames@broadcom.com>
Tested-by: Jonathan Richardson <jonathar@broadcom.com>
Reviewed-by: JD (Jiandong) Zheng <jdzheng@broadcom.com>
Signed-off-by: Scott Branden <sbranden@broadcom.com>
---
 arch/arm/boot/dts/Makefile              |    4 ++
 arch/arm/boot/dts/bcm-cygnus-clock.dtsi |   73 +++++++++++++++++++++
 arch/arm/boot/dts/bcm-cygnus.dtsi       |  109 +++++++++++++++++++++++++++++++
 arch/arm/boot/dts/bcm911360_entphn.dts  |   22 +++++++
 arch/arm/boot/dts/bcm911360k.dts        |   22 +++++++
 arch/arm/boot/dts/bcm958300k.dts        |   22 +++++++
 6 files changed, 252 insertions(+)
 create mode 100644 arch/arm/boot/dts/bcm-cygnus-clock.dtsi
 create mode 100644 arch/arm/boot/dts/bcm-cygnus.dtsi
 create mode 100644 arch/arm/boot/dts/bcm911360_entphn.dts
 create mode 100644 arch/arm/boot/dts/bcm911360k.dts
 create mode 100644 arch/arm/boot/dts/bcm958300k.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 7c80af9..a6b734a 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -54,6 +54,10 @@ dtb-$(CONFIG_ARCH_AT91)	+= at91-sama5d4ek.dtb
 dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb
 dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amarillo.dtb
 dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
+dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
+	bcm911360_entphn.dtb \
+	bcm911360k.dtb \
+	bcm958300k.dtb
 dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb
 dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb
 dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \
diff --git a/arch/arm/boot/dts/bcm-cygnus-clock.dtsi b/arch/arm/boot/dts/bcm-cygnus-clock.dtsi
new file mode 100644
index 0000000..d06172b
--- /dev/null
+++ b/arch/arm/boot/dts/bcm-cygnus-clock.dtsi
@@ -0,0 +1,73 @@
+/*
+ * Copyright 2014 Broadcom Corporation.  All rights reserved.
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+clocks {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+
+	osc: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <1>;
+		clock-frequency = <25000000>;
+	};
+
+	apb_clk: apb_clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1000000000>;
+	};
+
+	periph_clk: periph_clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <500000000>;
+	};
+
+	sdio_clk: lcpll_ch2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;
+	};
+
+	axi81_clk: axi81_clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	keypad_clk: keypad_clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <31806>;
+	};
+
+	adc_clk: adc_clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1562500>;
+	};
+
+	pwm_clk: pwm_clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1000000>;
+	};
+
+	lcd_clk: mipipll_ch1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
new file mode 100644
index 0000000..a377ab2
--- /dev/null
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -0,0 +1,109 @@
+/*
+ * Copyright 2014 Broadcom Corporation.  All rights reserved.
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "brcm,cygnus";
+	model = "Broadcom Cygnus SoC";
+	interrupt-parent = <&gic>;
+
+	aliases {
+		serial0 = &uart3;
+		serial1 = &uart0;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk debug";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x0>;
+		};
+	};
+
+	/include/ "bcm-cygnus-clock.dtsi"
+
+	amba {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "arm,amba-bus", "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		wdt@18009000 {
+			 compatible = "arm,sp805" , "arm,primecell";
+			 reg = <0x18009000 0x1000>;
+			 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			 clocks = <&axi81_clk>;
+			 clock-names = "apb_pclk";
+		};
+	};
+
+	uart3: serial@18023000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x18023000 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <100000000>;
+		clocks = <&axi81_clk>;
+		status = "okay";
+	};
+
+	uart0: serial@18020000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x18020000 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&axi81_clk>;
+		clock-frequency = <100000000>;
+		status = "okay";
+	};
+
+	gic: interrupt-controller@19021000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x19021000 0x1000>,
+		      <0x19020100 0x100>;
+	};
+
+	L2: l2-cache {
+		compatible = "arm,pl310-cache";
+		reg = <0x19022000 0x1000>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	timer@19020200 {
+		compatible = "arm,cortex-a9-global-timer";
+		reg = <0x19020200 0x100>;
+		interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&periph_clk>;
+	};
+
+};
diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts
new file mode 100644
index 0000000..c5188d7
--- /dev/null
+++ b/arch/arm/boot/dts/bcm911360_entphn.dts
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2014 Broadcom Corporation.  All rights reserved.
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include "bcm-cygnus.dtsi"
+
+/ {
+	model = "Cygnus Enterprise Phone (BCM911360_ENTPHN)";
+	compatible = "brcm,bcm11360", "brcm,cygnus";
+};
diff --git a/arch/arm/boot/dts/bcm911360k.dts b/arch/arm/boot/dts/bcm911360k.dts
new file mode 100644
index 0000000..866d1e1
--- /dev/null
+++ b/arch/arm/boot/dts/bcm911360k.dts
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2014 Broadcom Corporation.  All rights reserved.
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include "bcm-cygnus.dtsi"
+
+/ {
+	model = "Cygnus SVK (BCM911360K)";
+	compatible = "brcm,bcm11360", "brcm,cygnus";
+};
diff --git a/arch/arm/boot/dts/bcm958300k.dts b/arch/arm/boot/dts/bcm958300k.dts
new file mode 100644
index 0000000..8739751
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958300k.dts
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2014 Broadcom Corporation.  All rights reserved.
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include "bcm-cygnus.dtsi"
+
+/ {
+	model = "Cygnus SVK (BCM958300K)";
+	compatible = "brcm,bcm58300", "brcm,cygnus";
+};
-- 
1.7.9.5


  parent reply	other threads:[~2014-10-15  2:59 UTC|newest]

Thread overview: 265+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <Scott Branden <sbranden@broadcom.com>
2014-10-08  5:26 ` [PATCH V3 0/6] Add initial support for Broadcom Cygnus SoC Scott Branden
2014-10-08  5:27   ` [PATCH 1/6] ARM: cygnus: Initial " Scott Branden
2014-10-08  7:54     ` Arnd Bergmann
2014-10-08 12:27       ` Scott Branden
2014-10-08 13:28         ` Arnd Bergmann
2014-10-08 16:27           ` Scott Branden
2014-10-08 18:12             ` Arnd Bergmann
2014-10-08 18:45               ` Scott Branden
2014-10-08 22:16               ` Scott Branden
2014-10-09  7:32                 ` Arnd Bergmann
2014-10-08  8:11     ` Russell King - ARM Linux
2014-10-08 11:17       ` Scott Branden
2014-10-08 11:41         ` Russell King - ARM Linux
2014-10-08 13:10     ` Rob Herring
2014-10-08 16:34       ` Scott Branden
2014-10-08  5:27   ` [PATCH 2/6] clk: Clock driver " Scott Branden
2014-10-08  5:27   ` [PATCH 3/6] dt-bindings: Document Broadcom Cygnus SoC and clock driver Scott Branden
2014-10-08  7:57     ` Arnd Bergmann
2014-10-08 10:58       ` Scott Branden
2014-10-08 13:35         ` Arnd Bergmann
2014-10-08  5:27   ` [PATCH 4/6] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC Scott Branden
2014-10-08  7:58     ` Arnd Bergmann
2014-10-08 11:01       ` Scott Branden
2014-10-08  5:27   ` [PATCH 5/6] ARM: dts: Enable " Scott Branden
2014-10-08  5:27   ` [PATCH 6/6] MAINTAINERS: Entry for Cygnus/iproc arm architecture and clock drivers Scott Branden
2014-10-09 22:44 ` [PATCH V4 0/7] Add initial support for Broadcom Cygnus SoC Scott Branden
2014-10-09 22:44   ` [PATCH V4 1/7] ARM: cygnus: Initial " Scott Branden
2014-10-10  9:50     ` Arnd Bergmann
2014-10-10 19:08       ` Scott Branden
2014-10-09 22:44   ` [PATCH V4 2/7] clk: Clock driver " Scott Branden
2014-10-09 22:44   ` [PATCH V4 3/7] dt-bindings: Document Broadcom Cygnus SoC and clock driver Scott Branden
2014-10-09 22:44   ` [PATCH V4 4/7] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC Scott Branden
2014-10-09 22:44   ` [PATCH V4 5/7] ARM: dts: Enable " Scott Branden
2014-10-10 10:08     ` Arnd Bergmann
2014-10-10 19:11       ` Scott Branden
2014-10-09 22:44   ` [PATCH V4 6/7] MAINTAINERS: Entry for Cygnus/iproc arm architecture and clock drivers Scott Branden
2014-10-09 23:00     ` Joe Perches
2014-10-09 23:18       ` Scott Branden
2014-10-09 22:44   ` [PATCH V4 7/7] ARM: multi_v7_defconfig: Enable ARCH_BCM_CYGNUS config Scott Branden
2014-10-10  9:59     ` Arnd Bergmann
2014-10-10 19:12       ` Scott Branden
2014-10-15  2:01 ` [PATCH 0/1] sdhci-bcm2835: added quirk and removed udelay in write ops Scott Branden
2014-10-15  2:01   ` [PATCH 1/1] mmc: " Scott Branden
2014-10-17  2:50     ` Stephen Warren
2014-10-15  2:58 ` [PATCH v5 0/6] Add initial support for Broadcom Cygnus SoC Scott Branden
2014-10-15  2:58   ` [PATCH v5 1/6] ARM: cygnus: Initial " Scott Branden
2014-10-20 19:55     ` Arnd Bergmann
2014-10-20 22:59       ` Scott Branden
2014-10-21  5:48         ` Arnd Bergmann
2014-10-22  0:11           ` Scott Branden
2014-10-22  8:22             ` Arnd Bergmann
2014-10-22 17:12               ` Scott Branden
2014-10-15  2:58   ` [PATCH v5 2/6] dt-bindings: Document Broadcom Cygnus SoC and clocks Scott Branden
2014-10-15  2:58   ` [PATCH v5 3/6] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC Scott Branden
2014-10-15  2:58   ` Scott Branden [this message]
2014-10-15  2:58   ` [PATCH v5 5/6] MAINTAINERS: Entry for Cygnus/iproc arm architecture Scott Branden
2014-10-15  2:58   ` [PATCH v5 6/6] ARM: mach-bcm: Consolidate currently supported IPROC SoCs Scott Branden
2014-10-15 15:54 ` [PATCH 1/1] MAINTAINERS: corrected bcm2835 search Scott Branden
2014-10-15 18:12   ` Stephen Warren
2014-10-15 16:43 ` [PATCH 1/1] mmc: sdhci-bcm2835: added quirk and removed udelay in write ops Scott Branden
2014-10-18  2:37   ` Stephen Warren
2014-10-18  6:40     ` Scott Branden
2014-10-22  2:09 ` [PATCH v6 0/6] Add initial support for Broadcom Cygnus SoC Scott Branden
2014-10-22  2:09   ` [PATCH v6 1/6] ARM: cygnus: Initial " Scott Branden
2014-10-22  2:09   ` [PATCH v6 2/6] dt-bindings: Document Broadcom Cygnus SoC and clocks Scott Branden
2014-10-22  2:09   ` [PATCH v6 3/6] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC Scott Branden
2014-10-22  2:09   ` [PATCH v6 4/6] ARM: dts: Enable " Scott Branden
2014-10-22  2:09   ` [PATCH v6 5/6] MAINTAINERS: Entry for Cygnus/iproc arm architecture Scott Branden
2014-10-22  2:09   ` [PATCH v6 6/6] ARM: mach-bcm: Consolidate currently supported IPROC SoCs Scott Branden
2014-10-22 20:57 ` [PATCH v7 0/7] Add initial support for Broadcom Cygnus SoC Scott Branden
2014-10-22 20:57   ` [PATCH v7 1/7] ARM: cygnus: Initial " Scott Branden
2014-10-22 20:57   ` [PATCH v7 2/7] dt-bindings: Document Broadcom Cygnus SoC and clocks Scott Branden
2014-10-22 20:57   ` [PATCH v7 3/7] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC Scott Branden
2014-10-22 20:57   ` [PATCH v7 4/7] ARM: dts: Enable " Scott Branden
2014-10-28 16:10     ` Arnd Bergmann
2014-10-28 19:41       ` Scott Branden
2014-10-22 20:57   ` [PATCH v7 5/7] MAINTAINERS: Entry for Cygnus/iproc arm architecture Scott Branden
2014-10-22 20:57   ` [PATCH v7 6/7] ARM: mach-bcm: Consolidate currently supported IPROC SoCs Scott Branden
2014-10-22 20:57   ` [PATCH v7 7/7] ARM: mach-bcm: ARCH_BCM_MOBILE: remove one level of menu from Kconfig Scott Branden
2014-10-28 19:53 ` [PATCH v8 0/8] Add initial support for Broadcom Cygnus SoC Scott Branden
2014-10-28 19:53   ` [PATCH v8 1/8] ARM: cygnus: Initial " Scott Branden
2014-10-28 19:53   ` [PATCH v8 2/8] dt-bindings: Document Broadcom Cygnus SoC and clocks Scott Branden
2014-10-28 19:53   ` [PATCH v8 3/8] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC Scott Branden
2014-10-28 19:53   ` [PATCH v8 4/8] ARM: dts: Enable " Scott Branden
2014-11-09  0:22     ` Olof Johansson
2014-11-09  6:13       ` Scott Branden
2014-11-09  6:49         ` Olof Johansson
2014-11-09 17:23           ` Greg Kroah-Hartman
2014-11-09 20:38             ` Arnd Bergmann
2014-11-10  5:17               ` Scott Branden
2014-11-10  8:11                 ` Arnd Bergmann
2014-11-10 18:28                   ` Scott Branden
2014-10-28 19:53   ` [PATCH v8 5/8] MAINTAINERS: Entry for Cygnus/iproc arm architecture Scott Branden
2014-10-28 19:53   ` [PATCH v8 6/8] ARM: mach-bcm: Consolidate currently supported IPROC SoCs Scott Branden
2014-10-28 19:53   ` [PATCH v8 7/8] ARM: mach-bcm: ARCH_BCM_MOBILE: remove one level of menu from Kconfig Scott Branden
2014-10-28 19:53   ` [PATCH v8 8/8] ARM: multi_v7_defconfig: Enable Broadcom Cygnus Scott Branden
2014-10-28 20:01     ` Arnd Bergmann
2014-10-28 20:06       ` Scott Branden
2014-10-28 20:13         ` Arnd Bergmann
2014-10-28 23:15 ` [PATCH v9 0/8] Add initial support for Broadcom Cygnus SoC Scott Branden
2014-10-28 23:15   ` [PATCH v9 1/8] ARM: cygnus: Initial " Scott Branden
2014-10-28 23:15   ` [PATCH v9 2/8] dt-bindings: Document Broadcom Cygnus SoC and clocks Scott Branden
2014-11-20  1:05     ` Mike Turquette
2014-10-28 23:15   ` [PATCH v9 3/8] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC Scott Branden
2014-10-28 23:15   ` [PATCH v9 4/8] ARM: dts: Enable " Scott Branden
2014-11-10 10:50     ` Paul Bolle
2014-11-10 18:35       ` Olof Johansson
2014-11-10 19:23         ` Paul Bolle
2014-10-28 23:15   ` [PATCH v9 5/8] MAINTAINERS: Entry for Cygnus/iproc arm architecture Scott Branden
2014-10-28 23:15   ` [PATCH v9 6/8] ARM: mach-bcm: Consolidate currently supported IPROC SoCs Scott Branden
2014-10-28 23:15   ` [PATCH v9 7/8] ARM: mach-bcm: ARCH_BCM_MOBILE: remove one level of menu from Kconfig Scott Branden
2014-10-28 23:15   ` [PATCH v9 8/8] ARM: multi_v7_defconfig: Enable Broadcom Cygnus Scott Branden
2014-10-30  6:36 ` [PATCHv2 0/5] sdhci-bcm2835: added quirk and removed udelay in write ops Scott Branden
2014-10-30  6:36   ` [PATCHv2 1/5] mmc: sdhci-bcm2835: group read and write functions to improve readability Scott Branden
2014-10-30  6:36   ` [PATCHv2 2/5] mmc: sdhci-bcm2835: make shift calculations consistent Scott Branden
2014-11-05  4:48     ` Stephen Warren
2014-11-05  5:19       ` Scott Branden
2014-10-30  6:36   ` [PATCHv2 3/5] mmc: shdci-bcm2835: add efficient back-to-back write workaround Scott Branden
2014-11-05  4:57     ` Stephen Warren
2014-11-05  6:55       ` Scott Branden
2014-11-06  4:48         ` Stephen Warren
2014-11-07 18:29           ` Scott Branden
2014-10-30  6:36   ` [PATCHv2 4/5] mmc: shdci-bcm2835: add verify for 32-bit back-to-back workaround Scott Branden
2014-11-05  4:44     ` Stephen Warren
2014-11-05  5:26       ` Scott Branden
2014-11-05  4:59     ` Stephen Warren
2014-11-05  7:00       ` Scott Branden
2014-11-06  5:01         ` Stephen Warren
2014-11-07 18:31           ` Scott Branden
2015-12-22 15:55             ` Stefan Wahren
2015-12-22 19:23               ` Scott Branden
2015-12-22 20:13                 ` Stefan Wahren
2014-10-30  6:36   ` [PATCHv2 5/5] mmc: sdhci-bcm2835: add sdhci quirk SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 Scott Branden
2014-11-05  5:00     ` Stephen Warren
2014-11-05  7:02       ` Scott Branden
2014-11-06  4:50         ` Stephen Warren
2014-11-07 18:30           ` Scott Branden
2014-11-10  5:55 ` [PATCH 1/2] ARM: multi_v7_defconfig: remove one level of menu from Kconfig Scott Branden
2014-11-10  5:55   ` [PATCH 2/2] ARM: multi_v7_defconfig: Enable Broadcom Cygnus Scott Branden
2014-11-14 18:29 ` [PATCH 0/4] pwm: kona: Drivers fixes Scott Branden
2014-11-14 18:29   ` [PATCH 1/4] pwm: kona: Remove setting default smooth type and polarity for all channels Scott Branden
2014-11-14 18:29   ` [PATCH 2/4] pwm: kona: Fix incorrect enable after channel polarity change Scott Branden
2014-11-14 18:29   ` [PATCH 3/4] pwm: kona: Fix enable, disable and config procedures Scott Branden
2014-11-14 18:30   ` [PATCH 4/4] pwm: kona: Update dependency to ARCH_BCM Scott Branden
2014-11-17 12:52     ` Thierry Reding
2014-11-17 17:33       ` Scott Branden
2014-11-17 12:41   ` [PATCH 0/4] pwm: kona: Drivers fixes Thierry Reding
2014-11-20 19:18 ` [PATCH] mtd: nand: added nand_shutdown Scott Branden
2014-11-26  9:10   ` Brian Norris
2014-11-27 18:28     ` Scott Branden
2014-11-28  0:30     ` Scott Branden
2014-12-04 22:38     ` Scott Branden
2014-11-25 19:40 ` [PATCH v2 0/4] pwm: kona: Drivers fixes Scott Branden
2014-11-25 19:40   ` [PATCH v2 1/4] pwm: kona: Remove setting default smooth type and polarity for all channels Scott Branden
2014-11-26  5:51     ` Tim Kryger
2014-11-28 23:47       ` Arun Ramamurthy
2014-11-29  1:08         ` Tim Kryger
2014-11-29  1:19           ` Arun Ramamurthy
2014-11-29  3:19             ` Tim Kryger
2014-12-01 19:37               ` Arun Ramamurthy
2014-12-04 20:22               ` Jonathan Richardson
2014-12-06 23:13                 ` Tim Kryger
2014-12-10 19:57                   ` Jonathan Richardson
2014-11-25 19:40   ` [PATCH v2 2/4] pwm: kona: Fix incorrect enable after channel polarity change Scott Branden
2014-11-26  6:22     ` Tim Kryger
2014-11-28 23:48       ` Arun Ramamurthy
2014-11-29  2:02         ` Tim Kryger
2014-12-04 20:33           ` Jonathan Richardson
2014-11-25 19:40   ` [PATCH v2 3/4] pwm: kona: Fix enable, disable and config procedures Scott Branden
2014-11-26  7:29     ` Tim Kryger
2014-11-27 23:30       ` Scott Branden
2014-11-28 23:49       ` Arun Ramamurthy
2014-11-29  2:30         ` Tim Kryger
2014-12-01 19:37           ` Arun Ramamurthy
2014-12-02  4:29             ` Tim Kryger
2014-12-04 20:26       ` Jonathan Richardson
2014-11-25 19:40   ` [PATCH v2 4/4] pwm: kona: Update dependency to ARCH_BCM Scott Branden
2014-12-04 22:37 ` [PATCH] mtd: add reboot notifier to mtdcore and register nand_shutdown with notifier Scott Branden
2014-12-05  0:13   ` Scott Branden
2014-12-05  2:31     ` Brian Norris
2014-12-05  0:11 ` [PATCH] mmc: sdhci: add quirk for ACMD23 broken Scott Branden
2014-12-05  0:16 ` [PATCH v2] " Scott Branden
2014-12-17 18:36   ` Scott Branden
2014-12-17 19:48   ` Chris Ball
2014-12-17 20:42     ` Scott Branden
2015-02-10  0:06 ` [PATCH 0/4] Add support for IPROC SDHCI controller Scott Branden
2015-02-10  0:06   ` [PATCH 1/4] mmc: sdhci: add quirk for ACMD23 broken Scott Branden
2015-02-10  0:06   ` [PATCH 2/4] mmc: sdhci: do not set AUTO_CMD12 for multi-block CMD53 Scott Branden
2015-02-10  0:06   ` [PATCH 3/4] mmc: sdhci-iproc: add IPROC SDHCI driver Scott Branden
2015-02-10  0:06   ` [PATCH 4/4] mmc: sdhci-iproc: add device tree bindings Scott Branden
2015-03-02 23:50     ` Florian Fainelli
2015-03-04 23:14       ` Scott Branden
2015-02-26 17:28   ` [PATCH 0/4] Add support for IPROC SDHCI controller Scott Branden
2015-02-10  0:07 ` [PATCH 0/2] Add support for Broadcom RNG200 Scott Branden
2015-02-10  0:07   ` [PATCH 1/2] hwrng: iproc-rng200 - Add Broadcom IPROC RNG driver Scott Branden
2015-02-10  0:27     ` Joe Perches
2015-02-14 16:36       ` Scott Branden
2015-02-14 17:02         ` Scott Branden
2015-02-10  0:07   ` [PATCH 2/2] hwrng: iproc-rng200 - Add device tree bindings Scott Branden
2015-02-10  0:07 ` [PATCH 0/2] Add support for Broadcom keypad controller Scott Branden
2015-02-10  0:07   ` [PATCH 1/2] Input: bcm-keypad: add device tree bindings Scott Branden
2015-02-10  0:51     ` Dmitry Torokhov
2015-02-14 16:49       ` Scott Branden
2015-02-16  5:17         ` Dmitry Torokhov
2015-02-23 17:49           ` Dmitry Torokhov
2015-02-26 16:13             ` Scott Branden
2015-02-10  0:07   ` [PATCH 2/2] Input: bcm-keypad: Add Broadcom keypad controller Scott Branden
2015-02-10  1:02     ` Dmitry Torokhov
2015-02-14 17:12       ` Scott Branden
2015-02-25 18:16 ` [PATCH v2 0/2] Add support for Broadcom RNG200 Scott Branden
2015-02-25 18:16   ` [PATCH v2 1/2] hwrng: iproc-rng200 - Add device tree bindings Scott Branden
2015-03-02 23:47     ` Florian Fainelli
2015-02-25 18:16   ` [PATCH v2 2/2] hwrng: iproc-rng200 - Add Broadcom IPROC RNG driver Scott Branden
2015-02-25 18:43     ` Dmitry Torokhov
2015-03-03  0:50       ` Scott Branden
2015-02-25 19:17     ` Arnd Bergmann
2015-02-26 19:37       ` Scott Branden
2015-02-26 20:15         ` Arnd Bergmann
2015-02-26 22:26           ` Scott Branden
2015-02-27  9:14             ` Arnd Bergmann
2015-02-28 16:01               ` Scott Branden
2015-02-28 19:31                 ` Arnd Bergmann
2015-03-02 19:41                   ` Scott Branden
2015-03-02 10:23   ` [PATCH v2 0/2] Add support for Broadcom RNG200 Herbert Xu
2015-02-26 16:08 ` [PATCH v2 0/2] Add support for Broadcom keypad controller Scott Branden
2015-02-26 16:08   ` [PATCH v2 1/2] Input: bcm-keypad: add device tree bindings Scott Branden
2015-02-27 23:39     ` Dmitry Torokhov
2015-02-28 15:41       ` Scott Branden
2015-02-26 16:08   ` [PATCH v2 2/2] Input: bcm-keypad: Add Broadcom keypad controller Scott Branden
2015-02-27 23:44     ` Dmitry Torokhov
2015-02-28 15:52       ` Scott Branden
2015-02-28 14:16     ` Paul Bolle
2015-02-28 15:36       ` Scott Branden
2015-02-28 16:03 ` [PATCH v3 0/2] Add support for " Scott Branden
2015-02-28 16:03   ` [PATCH v3 1/2] Input: bcm-keypad: add device tree bindings Scott Branden
2015-02-28 16:03   ` [PATCH v3 2/2] Input: bcm-keypad: Add Broadcom keypad controller Scott Branden
2015-02-28 16:35 ` [PATCH v4 0/2] Add support for " Scott Branden
2015-02-28 16:35   ` [PATCH v4 1/2] Input: bcm-keypad: add device tree bindings Scott Branden
2015-03-03  0:04     ` Dmitry Torokhov
2015-02-28 16:35   ` [PATCH v4 2/2] Input: bcm-keypad: Add Broadcom keypad controller Scott Branden
2015-02-28 22:10     ` Dmitry Torokhov
2015-02-28 22:15       ` Dmitry Torokhov
2015-03-02 19:37         ` Scott Branden
2015-03-02 20:23           ` Dmitry Torokhov
2015-03-02 21:59             ` Scott Branden
2015-03-02 19:38         ` Scott Branden
2015-03-04 20:42 ` [PATCH v3 0/2] Add support for Broadcom RNG200 Scott Branden
2015-03-04 20:42   ` [PATCH v3 1/2] hwrng: iproc-rng200 - Add device tree bindings Scott Branden
2015-03-04 20:42   ` [PATCH v3 2/2] hwrng: iproc-rng200 - Add Broadcom IPROC RNG driver Scott Branden
2015-03-06 11:53   ` [PATCH v3 0/2] Add support for Broadcom RNG200 Herbert Xu
2015-03-05 15:59 ` [PATCH RESEND 0/4] Add support for IPROC SDHCI controller Scott Branden
2015-03-05 15:59   ` [PATCH 1/4] mmc: sdhci: add quirk for ACMD23 broken Scott Branden
2015-03-05 15:59   ` [PATCH 2/4] mmc: sdhci: do not set AUTO_CMD12 for multi-block CMD53 Scott Branden
2015-03-05 15:59   ` [PATCH 3/4] mmc: sdhci-iproc: add IPROC SDHCI driver Scott Branden
2015-03-05 15:59   ` [PATCH 4/4] mmc: sdhci-iproc: add device tree bindings Scott Branden
2015-03-05 16:16   ` [PATCH RESEND 0/4] Add support for IPROC SDHCI controller Ulf Hansson
2015-03-05 19:57     ` Florian Fainelli
2015-03-10 18:35 ` [PATCH] mmc: sdhci: fix card presence logic in sdhci_request function Scott Branden
2015-03-13 10:14   ` Ulf Hansson
2015-03-16 17:59 ` [PATCH] wireless: rt2x00: add new rt2800usb device DWA 130 Scott Branden
2015-03-20  6:45   ` Kalle Valo
2015-03-16 18:19 ` [PATCH] ARM: amba: Increase number of IRQs Scott Branden
2015-03-16 21:08   ` Russell King - ARM Linux
2015-03-16 21:18     ` Scott Branden
2015-03-16 21:16 ` [PATCH v2 1/1] " Scott Branden

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1413341936-17606-5-git-send-email-sbranden@broadcom.com \
    --to=sbranden@broadcom.com \
    --cc=akpm@linux-foundation.org \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=bcm@fixthebug.org \
    --cc=crope@iki.fi \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=elder@linaro.org \
    --cc=galak@codeaurora.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=jdzheng@broadcom.com \
    --cc=joe@perches.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=m.chehab@samsung.com \
    --cc=mark.rutland@arm.com \
    --cc=mporter@linaro.org \
    --cc=mturquette@linaro.org \
    --cc=pawel.moll@arm.com \
    --cc=rjui@broadcom.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).