From: Scott Branden <sbranden@broadcom.com>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: <bcm-kernel-feedback-list@broadcom.com>,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
"Ian Campbell" <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Grant Likely <grant.likely@linaro.org>,
Ray Jui <rjui@broadcom.com>,
Jonathan Richardson <jonathar@broadcom.com>,
Dmitry Torokhov <dtor@google.com>,
Anatol Pomazao <anatol@google.com>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 1/2] Input: bcm-keypad: add device tree bindings
Date: Sat, 14 Feb 2015 08:49:15 -0800 [thread overview]
Message-ID: <54DF7C8B.3050103@broadcom.com> (raw)
In-Reply-To: <20150210005134.GA13695@dtor-ws>
Hi Dmitry,
Comments inline. I still have an issue with vendor prefix as there are
not documented guidelines I can find in this area?
On 15-02-09 04:51 PM, Dmitry Torokhov wrote:
> Hi Scott,
>
> On Mon, Feb 09, 2015 at 04:07:40PM -0800, Scott Branden wrote:
>> Documents the Broadcom keypad controller device tree bindings.
>>
>> Reviewed-by: Ray Jui <rjui@broadcom.com>
>> Signed-off-by: Scott Branden <sbranden@broadcom.com>
>> ---
>> .../devicetree/bindings/input/brcm,bcm-keypad.txt | 118 +++++++++++++++++++++
>> 1 file changed, 118 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/input/brcm,bcm-keypad.txt
>>
>> diff --git a/Documentation/devicetree/bindings/input/brcm,bcm-keypad.txt b/Documentation/devicetree/bindings/input/brcm,bcm-keypad.txt
>> new file mode 100644
>> index 0000000..645829d
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/input/brcm,bcm-keypad.txt
>> @@ -0,0 +1,118 @@
>> +* Broadcom Keypad Controller device tree bindings
>> +
>> +Broadcom Keypad controller is used to interface a SoC with a matrix-type
>> +keypad device. The keypad controller supports multiple row and column lines.
>> +A key can be placed at each intersection of a unique row and a unique column.
>> +The keypad controller can sense a key-press and key-release and report the
>> +event using a interrupt to the cpu.
>> +
>> +This binding is based on the matrix-keymap binding with the following
>> +changes:
>> +
>> +keypad,num-rows and keypad,num-columns are required.
>> +
>> +Required SoC Specific Properties:
>> +- compatible: should be "brcm,bcm-keypad"
>> +
>> +- reg: physical base address of the controller and length of memory mapped
>> + region.
>> +
>> +- interrupts: The interrupt number to the cpu.
>> +
>> +Board Specific Properties:
>> +- keypad,num-rows: Number of row lines connected to the keypad
>> + controller.
>> +
>> +- keypad,num-columns: Number of column lines connected to the
>> + keypad controller.
>> +
>> +- key-interrupt-trigger-type: The type of interrupt trigger asociated with the Keypad matrix.
>> +
>> + KEYPAD_INTERRUPT_NO_TRIGGER = 0
>> + KEYPAD_INTERRUPT_RISING_EDGE = 1
>> + KEYPAD_INTERRUPT_FALLING_EDGE = 2
>> + KEYPAD_INTERRUPT_BOTH_EDGES = 3
>
> Can we get this data from the interrupt spec?
I don't understand your question. Could you elaborate?
But, looking at this closer this determines when the hardware should
generate interrupts. I think we would always need to set it to both
edges and this binding option can probably we removed?
>
>> +
>> +- col-debounce-filter-period: The debounce period for the Column filter.
>> +
>> + KEYPAD_DEBOUNCE_1_ms = 0
>> + KEYPAD_DEBOUNCE_2_ms = 1
>> + KEYPAD_DEBOUNCE_4_ms = 2
>> + KEYPAD_DEBOUNCE_8_ms = 3
>
>> + KEYPAD_DEBOUNCE_16_ms = 4
>> + KEYPAD_DEBOUNCE_32_ms = 5
>> + KEYPAD_DEBOUNCE_64_ms = 6
>> + KEYPAD_DEBOUNCE_128_ms = 7
>> +
>> +- status-debounce-filter-period: The debounce period for the Status filter.
>> +
>> + KEYPAD_DEBOUNCE_1_ms = 0
>> + KEYPAD_DEBOUNCE_2_ms = 1
>> + KEYPAD_DEBOUNCE_4_ms = 2
>> + KEYPAD_DEBOUNCE_8_ms = 3
>> + KEYPAD_DEBOUNCE_16_ms = 4
>> + KEYPAD_DEBOUNCE_32_ms = 5
>> + KEYPAD_DEBOUNCE_64_ms = 6
>> + KEYPAD_DEBOUNCE_128_ms = 7
>
> I could swear device-specific properties should be in form of
> <vendor-prefix>,<property-name> to ensure it won't clash with changes on
> subsystem level later on. Device-tree folks, what say you?
I see examples with and without vendor-prefix.
qcom,pm8xxx-keypad.txt does not have prefixes
st-keyscan.txt does have a prefix
I can't find any documented guidelines for this.
Clash changes should not happen because as new standard properties are
added the drivers should be adjusted to use the new dt-bindings?
>
>> +
>> +- row-output-enabled: An optional property indicating whether the row or
>> + column is being used as output. If specified the row is being used
>> + as the output. Else defaults to column.
>> +
>> +- pull-up-enabled: An optional property indicating the Keypad scan mode.
>> + If specified implies the keypad scan pull-up has been enabled.
>> +
>> +- Keys represented as child nodes: Each key connected to the keypad
>> + controller is represented as a child node to the keypad controller
>> + device node and should include the following properties.
>> + - row: the row number to which the key is connected.
>> + - column: the column number to which the key is connected.
>> + - code: the key-code to be reported when the key is pressed
>> + and released.
>
> That does not seem to be right, linux,keymap is a list, not a subtree.
> I'd simply refer to
> Documentation/devicetree/bindings/input/matrix-keymap.txt for details.
Yes, we moved to matrix-keymap and forgot to update this documentation.
Will correct - thanks.
>
>> +
>> +Example:
>> +#include "dt-bindings/input/input.h"
>> +
>> +/ {
>> + keypad: keypad@180ac000 {
>> + /* Required SoC specific properties */
>> + compatible = "brcm,bcm-keypad";
>> +
>> + /* Required Board specific properties */
>> + keypad,num-rows = <5>;
>> + keypad,num-columns = <5>;
>> + status = "okay";
>> +
>> + linux,keymap = <MATRIX_KEY(0x00, 0x02, KEY_F) /* key_forward */
>> + MATRIX_KEY(0x00, 0x03, KEY_HOME) /* key_home */
>> + MATRIX_KEY(0x00, 0x04, KEY_M) /* key_message */
>> + MATRIX_KEY(0x01, 0x00, KEY_A) /* key_contacts */
>> + MATRIX_KEY(0x01, 0x01, KEY_1) /* key_1 */
>> + MATRIX_KEY(0x01, 0x02, KEY_2) /* key_2 */
>> + MATRIX_KEY(0x01, 0x03, KEY_3) /* key_3 */
>> + MATRIX_KEY(0x01, 0x04, KEY_S) /* key_speaker */
>> + MATRIX_KEY(0x02, 0x00, KEY_P) /* key_phone */
>> + MATRIX_KEY(0x02, 0x01, KEY_4) /* key_4 */
>> + MATRIX_KEY(0x02, 0x02, KEY_5) /* key_5 */
>> + MATRIX_KEY(0x02, 0x03, KEY_6) /* key_6 */
>> + MATRIX_KEY(0x02, 0x04, KEY_VOLUMEUP) /* key_vol_up */
>> + MATRIX_KEY(0x03, 0x00, KEY_C) /* key_call_log */
>> + MATRIX_KEY(0x03, 0x01, KEY_7) /* key_7 */
>> + MATRIX_KEY(0x03, 0x02, KEY_8) /* key_8 */
>> + MATRIX_KEY(0x03, 0x03, KEY_9) /* key_9 */
>> + MATRIX_KEY(0x03, 0x04, KEY_VOLUMEDOWN) /* key_vol_down */
>> + MATRIX_KEY(0x04, 0x00, KEY_H) /* key_headset */
>> + MATRIX_KEY(0x04, 0x01, KEY_KPASTERISK) /* key_* */
>> + MATRIX_KEY(0x04, 0x02, KEY_0) /* key_0 */
>> + MATRIX_KEY(0x04, 0x03, KEY_GRAVE) /* key_# */
>> + MATRIX_KEY(0x04, 0x04, KEY_MUTE) /* key_mute */
>> + >;
>> +
>> + /* Optional board specific properties */
>> + key-interrupt-trigger-type = <3>;
>> + col-debounce-filter-period = <5>;
>> + row-output-enabled;
>> + pull-up-enabled;
>> +
>> + };
>> +};
>> --
>> 2.2.2
>>
>
> Thanks.
>
next prev parent reply other threads:[~2015-02-14 16:49 UTC|newest]
Thread overview: 265+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <Scott Branden <sbranden@broadcom.com>
2014-10-08 5:26 ` [PATCH V3 0/6] Add initial support for Broadcom Cygnus SoC Scott Branden
2014-10-08 5:27 ` [PATCH 1/6] ARM: cygnus: Initial " Scott Branden
2014-10-08 7:54 ` Arnd Bergmann
2014-10-08 12:27 ` Scott Branden
2014-10-08 13:28 ` Arnd Bergmann
2014-10-08 16:27 ` Scott Branden
2014-10-08 18:12 ` Arnd Bergmann
2014-10-08 18:45 ` Scott Branden
2014-10-08 22:16 ` Scott Branden
2014-10-09 7:32 ` Arnd Bergmann
2014-10-08 8:11 ` Russell King - ARM Linux
2014-10-08 11:17 ` Scott Branden
2014-10-08 11:41 ` Russell King - ARM Linux
2014-10-08 13:10 ` Rob Herring
2014-10-08 16:34 ` Scott Branden
2014-10-08 5:27 ` [PATCH 2/6] clk: Clock driver " Scott Branden
2014-10-08 5:27 ` [PATCH 3/6] dt-bindings: Document Broadcom Cygnus SoC and clock driver Scott Branden
2014-10-08 7:57 ` Arnd Bergmann
2014-10-08 10:58 ` Scott Branden
2014-10-08 13:35 ` Arnd Bergmann
2014-10-08 5:27 ` [PATCH 4/6] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC Scott Branden
2014-10-08 7:58 ` Arnd Bergmann
2014-10-08 11:01 ` Scott Branden
2014-10-08 5:27 ` [PATCH 5/6] ARM: dts: Enable " Scott Branden
2014-10-08 5:27 ` [PATCH 6/6] MAINTAINERS: Entry for Cygnus/iproc arm architecture and clock drivers Scott Branden
2014-10-09 22:44 ` [PATCH V4 0/7] Add initial support for Broadcom Cygnus SoC Scott Branden
2014-10-09 22:44 ` [PATCH V4 1/7] ARM: cygnus: Initial " Scott Branden
2014-10-10 9:50 ` Arnd Bergmann
2014-10-10 19:08 ` Scott Branden
2014-10-09 22:44 ` [PATCH V4 2/7] clk: Clock driver " Scott Branden
2014-10-09 22:44 ` [PATCH V4 3/7] dt-bindings: Document Broadcom Cygnus SoC and clock driver Scott Branden
2014-10-09 22:44 ` [PATCH V4 4/7] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC Scott Branden
2014-10-09 22:44 ` [PATCH V4 5/7] ARM: dts: Enable " Scott Branden
2014-10-10 10:08 ` Arnd Bergmann
2014-10-10 19:11 ` Scott Branden
2014-10-09 22:44 ` [PATCH V4 6/7] MAINTAINERS: Entry for Cygnus/iproc arm architecture and clock drivers Scott Branden
2014-10-09 23:00 ` Joe Perches
2014-10-09 23:18 ` Scott Branden
2014-10-09 22:44 ` [PATCH V4 7/7] ARM: multi_v7_defconfig: Enable ARCH_BCM_CYGNUS config Scott Branden
2014-10-10 9:59 ` Arnd Bergmann
2014-10-10 19:12 ` Scott Branden
2014-10-15 2:01 ` [PATCH 0/1] sdhci-bcm2835: added quirk and removed udelay in write ops Scott Branden
2014-10-15 2:01 ` [PATCH 1/1] mmc: " Scott Branden
2014-10-17 2:50 ` Stephen Warren
2014-10-15 2:58 ` [PATCH v5 0/6] Add initial support for Broadcom Cygnus SoC Scott Branden
2014-10-15 2:58 ` [PATCH v5 1/6] ARM: cygnus: Initial " Scott Branden
2014-10-20 19:55 ` Arnd Bergmann
2014-10-20 22:59 ` Scott Branden
2014-10-21 5:48 ` Arnd Bergmann
2014-10-22 0:11 ` Scott Branden
2014-10-22 8:22 ` Arnd Bergmann
2014-10-22 17:12 ` Scott Branden
2014-10-15 2:58 ` [PATCH v5 2/6] dt-bindings: Document Broadcom Cygnus SoC and clocks Scott Branden
2014-10-15 2:58 ` [PATCH v5 3/6] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC Scott Branden
2014-10-15 2:58 ` [PATCH v5 4/6] ARM: dts: Enable " Scott Branden
2014-10-15 2:58 ` [PATCH v5 5/6] MAINTAINERS: Entry for Cygnus/iproc arm architecture Scott Branden
2014-10-15 2:58 ` [PATCH v5 6/6] ARM: mach-bcm: Consolidate currently supported IPROC SoCs Scott Branden
2014-10-15 15:54 ` [PATCH 1/1] MAINTAINERS: corrected bcm2835 search Scott Branden
2014-10-15 18:12 ` Stephen Warren
2014-10-15 16:43 ` [PATCH 1/1] mmc: sdhci-bcm2835: added quirk and removed udelay in write ops Scott Branden
2014-10-18 2:37 ` Stephen Warren
2014-10-18 6:40 ` Scott Branden
2014-10-22 2:09 ` [PATCH v6 0/6] Add initial support for Broadcom Cygnus SoC Scott Branden
2014-10-22 2:09 ` [PATCH v6 1/6] ARM: cygnus: Initial " Scott Branden
2014-10-22 2:09 ` [PATCH v6 2/6] dt-bindings: Document Broadcom Cygnus SoC and clocks Scott Branden
2014-10-22 2:09 ` [PATCH v6 3/6] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC Scott Branden
2014-10-22 2:09 ` [PATCH v6 4/6] ARM: dts: Enable " Scott Branden
2014-10-22 2:09 ` [PATCH v6 5/6] MAINTAINERS: Entry for Cygnus/iproc arm architecture Scott Branden
2014-10-22 2:09 ` [PATCH v6 6/6] ARM: mach-bcm: Consolidate currently supported IPROC SoCs Scott Branden
2014-10-22 20:57 ` [PATCH v7 0/7] Add initial support for Broadcom Cygnus SoC Scott Branden
2014-10-22 20:57 ` [PATCH v7 1/7] ARM: cygnus: Initial " Scott Branden
2014-10-22 20:57 ` [PATCH v7 2/7] dt-bindings: Document Broadcom Cygnus SoC and clocks Scott Branden
2014-10-22 20:57 ` [PATCH v7 3/7] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC Scott Branden
2014-10-22 20:57 ` [PATCH v7 4/7] ARM: dts: Enable " Scott Branden
2014-10-28 16:10 ` Arnd Bergmann
2014-10-28 19:41 ` Scott Branden
2014-10-22 20:57 ` [PATCH v7 5/7] MAINTAINERS: Entry for Cygnus/iproc arm architecture Scott Branden
2014-10-22 20:57 ` [PATCH v7 6/7] ARM: mach-bcm: Consolidate currently supported IPROC SoCs Scott Branden
2014-10-22 20:57 ` [PATCH v7 7/7] ARM: mach-bcm: ARCH_BCM_MOBILE: remove one level of menu from Kconfig Scott Branden
2014-10-28 19:53 ` [PATCH v8 0/8] Add initial support for Broadcom Cygnus SoC Scott Branden
2014-10-28 19:53 ` [PATCH v8 1/8] ARM: cygnus: Initial " Scott Branden
2014-10-28 19:53 ` [PATCH v8 2/8] dt-bindings: Document Broadcom Cygnus SoC and clocks Scott Branden
2014-10-28 19:53 ` [PATCH v8 3/8] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC Scott Branden
2014-10-28 19:53 ` [PATCH v8 4/8] ARM: dts: Enable " Scott Branden
2014-11-09 0:22 ` Olof Johansson
2014-11-09 6:13 ` Scott Branden
2014-11-09 6:49 ` Olof Johansson
2014-11-09 17:23 ` Greg Kroah-Hartman
2014-11-09 20:38 ` Arnd Bergmann
2014-11-10 5:17 ` Scott Branden
2014-11-10 8:11 ` Arnd Bergmann
2014-11-10 18:28 ` Scott Branden
2014-10-28 19:53 ` [PATCH v8 5/8] MAINTAINERS: Entry for Cygnus/iproc arm architecture Scott Branden
2014-10-28 19:53 ` [PATCH v8 6/8] ARM: mach-bcm: Consolidate currently supported IPROC SoCs Scott Branden
2014-10-28 19:53 ` [PATCH v8 7/8] ARM: mach-bcm: ARCH_BCM_MOBILE: remove one level of menu from Kconfig Scott Branden
2014-10-28 19:53 ` [PATCH v8 8/8] ARM: multi_v7_defconfig: Enable Broadcom Cygnus Scott Branden
2014-10-28 20:01 ` Arnd Bergmann
2014-10-28 20:06 ` Scott Branden
2014-10-28 20:13 ` Arnd Bergmann
2014-10-28 23:15 ` [PATCH v9 0/8] Add initial support for Broadcom Cygnus SoC Scott Branden
2014-10-28 23:15 ` [PATCH v9 1/8] ARM: cygnus: Initial " Scott Branden
2014-10-28 23:15 ` [PATCH v9 2/8] dt-bindings: Document Broadcom Cygnus SoC and clocks Scott Branden
2014-11-20 1:05 ` Mike Turquette
2014-10-28 23:15 ` [PATCH v9 3/8] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC Scott Branden
2014-10-28 23:15 ` [PATCH v9 4/8] ARM: dts: Enable " Scott Branden
2014-11-10 10:50 ` Paul Bolle
2014-11-10 18:35 ` Olof Johansson
2014-11-10 19:23 ` Paul Bolle
2014-10-28 23:15 ` [PATCH v9 5/8] MAINTAINERS: Entry for Cygnus/iproc arm architecture Scott Branden
2014-10-28 23:15 ` [PATCH v9 6/8] ARM: mach-bcm: Consolidate currently supported IPROC SoCs Scott Branden
2014-10-28 23:15 ` [PATCH v9 7/8] ARM: mach-bcm: ARCH_BCM_MOBILE: remove one level of menu from Kconfig Scott Branden
2014-10-28 23:15 ` [PATCH v9 8/8] ARM: multi_v7_defconfig: Enable Broadcom Cygnus Scott Branden
2014-10-30 6:36 ` [PATCHv2 0/5] sdhci-bcm2835: added quirk and removed udelay in write ops Scott Branden
2014-10-30 6:36 ` [PATCHv2 1/5] mmc: sdhci-bcm2835: group read and write functions to improve readability Scott Branden
2014-10-30 6:36 ` [PATCHv2 2/5] mmc: sdhci-bcm2835: make shift calculations consistent Scott Branden
2014-11-05 4:48 ` Stephen Warren
2014-11-05 5:19 ` Scott Branden
2014-10-30 6:36 ` [PATCHv2 3/5] mmc: shdci-bcm2835: add efficient back-to-back write workaround Scott Branden
2014-11-05 4:57 ` Stephen Warren
2014-11-05 6:55 ` Scott Branden
2014-11-06 4:48 ` Stephen Warren
2014-11-07 18:29 ` Scott Branden
2014-10-30 6:36 ` [PATCHv2 4/5] mmc: shdci-bcm2835: add verify for 32-bit back-to-back workaround Scott Branden
2014-11-05 4:44 ` Stephen Warren
2014-11-05 5:26 ` Scott Branden
2014-11-05 4:59 ` Stephen Warren
2014-11-05 7:00 ` Scott Branden
2014-11-06 5:01 ` Stephen Warren
2014-11-07 18:31 ` Scott Branden
2015-12-22 15:55 ` Stefan Wahren
2015-12-22 19:23 ` Scott Branden
2015-12-22 20:13 ` Stefan Wahren
2014-10-30 6:36 ` [PATCHv2 5/5] mmc: sdhci-bcm2835: add sdhci quirk SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 Scott Branden
2014-11-05 5:00 ` Stephen Warren
2014-11-05 7:02 ` Scott Branden
2014-11-06 4:50 ` Stephen Warren
2014-11-07 18:30 ` Scott Branden
2014-11-10 5:55 ` [PATCH 1/2] ARM: multi_v7_defconfig: remove one level of menu from Kconfig Scott Branden
2014-11-10 5:55 ` [PATCH 2/2] ARM: multi_v7_defconfig: Enable Broadcom Cygnus Scott Branden
2014-11-14 18:29 ` [PATCH 0/4] pwm: kona: Drivers fixes Scott Branden
2014-11-14 18:29 ` [PATCH 1/4] pwm: kona: Remove setting default smooth type and polarity for all channels Scott Branden
2014-11-14 18:29 ` [PATCH 2/4] pwm: kona: Fix incorrect enable after channel polarity change Scott Branden
2014-11-14 18:29 ` [PATCH 3/4] pwm: kona: Fix enable, disable and config procedures Scott Branden
2014-11-14 18:30 ` [PATCH 4/4] pwm: kona: Update dependency to ARCH_BCM Scott Branden
2014-11-17 12:52 ` Thierry Reding
2014-11-17 17:33 ` Scott Branden
2014-11-17 12:41 ` [PATCH 0/4] pwm: kona: Drivers fixes Thierry Reding
2014-11-20 19:18 ` [PATCH] mtd: nand: added nand_shutdown Scott Branden
2014-11-26 9:10 ` Brian Norris
2014-11-27 18:28 ` Scott Branden
2014-11-28 0:30 ` Scott Branden
2014-12-04 22:38 ` Scott Branden
2014-11-25 19:40 ` [PATCH v2 0/4] pwm: kona: Drivers fixes Scott Branden
2014-11-25 19:40 ` [PATCH v2 1/4] pwm: kona: Remove setting default smooth type and polarity for all channels Scott Branden
2014-11-26 5:51 ` Tim Kryger
2014-11-28 23:47 ` Arun Ramamurthy
2014-11-29 1:08 ` Tim Kryger
2014-11-29 1:19 ` Arun Ramamurthy
2014-11-29 3:19 ` Tim Kryger
2014-12-01 19:37 ` Arun Ramamurthy
2014-12-04 20:22 ` Jonathan Richardson
2014-12-06 23:13 ` Tim Kryger
2014-12-10 19:57 ` Jonathan Richardson
2014-11-25 19:40 ` [PATCH v2 2/4] pwm: kona: Fix incorrect enable after channel polarity change Scott Branden
2014-11-26 6:22 ` Tim Kryger
2014-11-28 23:48 ` Arun Ramamurthy
2014-11-29 2:02 ` Tim Kryger
2014-12-04 20:33 ` Jonathan Richardson
2014-11-25 19:40 ` [PATCH v2 3/4] pwm: kona: Fix enable, disable and config procedures Scott Branden
2014-11-26 7:29 ` Tim Kryger
2014-11-27 23:30 ` Scott Branden
2014-11-28 23:49 ` Arun Ramamurthy
2014-11-29 2:30 ` Tim Kryger
2014-12-01 19:37 ` Arun Ramamurthy
2014-12-02 4:29 ` Tim Kryger
2014-12-04 20:26 ` Jonathan Richardson
2014-11-25 19:40 ` [PATCH v2 4/4] pwm: kona: Update dependency to ARCH_BCM Scott Branden
2014-12-04 22:37 ` [PATCH] mtd: add reboot notifier to mtdcore and register nand_shutdown with notifier Scott Branden
2014-12-05 0:13 ` Scott Branden
2014-12-05 2:31 ` Brian Norris
2014-12-05 0:11 ` [PATCH] mmc: sdhci: add quirk for ACMD23 broken Scott Branden
2014-12-05 0:16 ` [PATCH v2] " Scott Branden
2014-12-17 18:36 ` Scott Branden
2014-12-17 19:48 ` Chris Ball
2014-12-17 20:42 ` Scott Branden
2015-02-10 0:06 ` [PATCH 0/4] Add support for IPROC SDHCI controller Scott Branden
2015-02-10 0:06 ` [PATCH 1/4] mmc: sdhci: add quirk for ACMD23 broken Scott Branden
2015-02-10 0:06 ` [PATCH 2/4] mmc: sdhci: do not set AUTO_CMD12 for multi-block CMD53 Scott Branden
2015-02-10 0:06 ` [PATCH 3/4] mmc: sdhci-iproc: add IPROC SDHCI driver Scott Branden
2015-02-10 0:06 ` [PATCH 4/4] mmc: sdhci-iproc: add device tree bindings Scott Branden
2015-03-02 23:50 ` Florian Fainelli
2015-03-04 23:14 ` Scott Branden
2015-02-26 17:28 ` [PATCH 0/4] Add support for IPROC SDHCI controller Scott Branden
2015-02-10 0:07 ` [PATCH 0/2] Add support for Broadcom RNG200 Scott Branden
2015-02-10 0:07 ` [PATCH 1/2] hwrng: iproc-rng200 - Add Broadcom IPROC RNG driver Scott Branden
2015-02-10 0:27 ` Joe Perches
2015-02-14 16:36 ` Scott Branden
2015-02-14 17:02 ` Scott Branden
2015-02-10 0:07 ` [PATCH 2/2] hwrng: iproc-rng200 - Add device tree bindings Scott Branden
2015-02-10 0:07 ` [PATCH 0/2] Add support for Broadcom keypad controller Scott Branden
2015-02-10 0:07 ` [PATCH 1/2] Input: bcm-keypad: add device tree bindings Scott Branden
2015-02-10 0:51 ` Dmitry Torokhov
2015-02-14 16:49 ` Scott Branden [this message]
2015-02-16 5:17 ` Dmitry Torokhov
2015-02-23 17:49 ` Dmitry Torokhov
2015-02-26 16:13 ` Scott Branden
2015-02-10 0:07 ` [PATCH 2/2] Input: bcm-keypad: Add Broadcom keypad controller Scott Branden
2015-02-10 1:02 ` Dmitry Torokhov
2015-02-14 17:12 ` Scott Branden
2015-02-25 18:16 ` [PATCH v2 0/2] Add support for Broadcom RNG200 Scott Branden
2015-02-25 18:16 ` [PATCH v2 1/2] hwrng: iproc-rng200 - Add device tree bindings Scott Branden
2015-03-02 23:47 ` Florian Fainelli
2015-02-25 18:16 ` [PATCH v2 2/2] hwrng: iproc-rng200 - Add Broadcom IPROC RNG driver Scott Branden
2015-02-25 18:43 ` Dmitry Torokhov
2015-03-03 0:50 ` Scott Branden
2015-02-25 19:17 ` Arnd Bergmann
2015-02-26 19:37 ` Scott Branden
2015-02-26 20:15 ` Arnd Bergmann
2015-02-26 22:26 ` Scott Branden
2015-02-27 9:14 ` Arnd Bergmann
2015-02-28 16:01 ` Scott Branden
2015-02-28 19:31 ` Arnd Bergmann
2015-03-02 19:41 ` Scott Branden
2015-03-02 10:23 ` [PATCH v2 0/2] Add support for Broadcom RNG200 Herbert Xu
2015-02-26 16:08 ` [PATCH v2 0/2] Add support for Broadcom keypad controller Scott Branden
2015-02-26 16:08 ` [PATCH v2 1/2] Input: bcm-keypad: add device tree bindings Scott Branden
2015-02-27 23:39 ` Dmitry Torokhov
2015-02-28 15:41 ` Scott Branden
2015-02-26 16:08 ` [PATCH v2 2/2] Input: bcm-keypad: Add Broadcom keypad controller Scott Branden
2015-02-27 23:44 ` Dmitry Torokhov
2015-02-28 15:52 ` Scott Branden
2015-02-28 14:16 ` Paul Bolle
2015-02-28 15:36 ` Scott Branden
2015-02-28 16:03 ` [PATCH v3 0/2] Add support for " Scott Branden
2015-02-28 16:03 ` [PATCH v3 1/2] Input: bcm-keypad: add device tree bindings Scott Branden
2015-02-28 16:03 ` [PATCH v3 2/2] Input: bcm-keypad: Add Broadcom keypad controller Scott Branden
2015-02-28 16:35 ` [PATCH v4 0/2] Add support for " Scott Branden
2015-02-28 16:35 ` [PATCH v4 1/2] Input: bcm-keypad: add device tree bindings Scott Branden
2015-03-03 0:04 ` Dmitry Torokhov
2015-02-28 16:35 ` [PATCH v4 2/2] Input: bcm-keypad: Add Broadcom keypad controller Scott Branden
2015-02-28 22:10 ` Dmitry Torokhov
2015-02-28 22:15 ` Dmitry Torokhov
2015-03-02 19:37 ` Scott Branden
2015-03-02 20:23 ` Dmitry Torokhov
2015-03-02 21:59 ` Scott Branden
2015-03-02 19:38 ` Scott Branden
2015-03-04 20:42 ` [PATCH v3 0/2] Add support for Broadcom RNG200 Scott Branden
2015-03-04 20:42 ` [PATCH v3 1/2] hwrng: iproc-rng200 - Add device tree bindings Scott Branden
2015-03-04 20:42 ` [PATCH v3 2/2] hwrng: iproc-rng200 - Add Broadcom IPROC RNG driver Scott Branden
2015-03-06 11:53 ` [PATCH v3 0/2] Add support for Broadcom RNG200 Herbert Xu
2015-03-05 15:59 ` [PATCH RESEND 0/4] Add support for IPROC SDHCI controller Scott Branden
2015-03-05 15:59 ` [PATCH 1/4] mmc: sdhci: add quirk for ACMD23 broken Scott Branden
2015-03-05 15:59 ` [PATCH 2/4] mmc: sdhci: do not set AUTO_CMD12 for multi-block CMD53 Scott Branden
2015-03-05 15:59 ` [PATCH 3/4] mmc: sdhci-iproc: add IPROC SDHCI driver Scott Branden
2015-03-05 15:59 ` [PATCH 4/4] mmc: sdhci-iproc: add device tree bindings Scott Branden
2015-03-05 16:16 ` [PATCH RESEND 0/4] Add support for IPROC SDHCI controller Ulf Hansson
2015-03-05 19:57 ` Florian Fainelli
2015-03-10 18:35 ` [PATCH] mmc: sdhci: fix card presence logic in sdhci_request function Scott Branden
2015-03-13 10:14 ` Ulf Hansson
2015-03-16 17:59 ` [PATCH] wireless: rt2x00: add new rt2800usb device DWA 130 Scott Branden
2015-03-20 6:45 ` Kalle Valo
2015-03-16 18:19 ` [PATCH] ARM: amba: Increase number of IRQs Scott Branden
2015-03-16 21:08 ` Russell King - ARM Linux
2015-03-16 21:18 ` Scott Branden
2015-03-16 21:16 ` [PATCH v2 1/1] " Scott Branden
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54DF7C8B.3050103@broadcom.com \
--to=sbranden@broadcom.com \
--cc=anatol@google.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=dtor@google.com \
--cc=galak@codeaurora.org \
--cc=grant.likely@linaro.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=jonathar@broadcom.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=rjui@broadcom.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).