From: Scott Branden <sbranden@broadcom.com>
To: Christian Daudt <bcm@fixthebug.org>,
Matt Porter <mporter@linaro.org>,
Russell King <linux@arm.linux.org.uk>,
<bcm-kernel-feedback-list@broadcom.com>,
Mike Turquette <mturquette@linaro.org>,
Alex Elder <elder@linaro.org>, Rob Herring <robh+dt@kernel.org>,
Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
"Kumar Gala" <galak@codeaurora.org>,
Andrew Morton <akpm@linux-foundation.org>,
"David S. Miller" <davem@davemloft.net>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Joe Perches <joe@perches.com>,
"Mauro Carvalho Chehab" <m.chehab@samsung.com>,
Antti Palosaari <crope@iki.fi>
Cc: JD Zheng <jdzheng@broadcom.com>, Ray Jui <rjui@broadcom.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
Jonathan Richardson <jonathar@broadcom.com>,
Scott Branden <sbranden@broadcom.com>
Subject: [PATCH v8 3/8] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC
Date: Tue, 28 Oct 2014 12:53:07 -0700 [thread overview]
Message-ID: <1414525992-3678-4-git-send-email-sbranden@broadcom.com> (raw)
In-Reply-To: <1414525992-3678-1-git-send-email-sbranden@broadcom.com>
From: Jonathan Richardson <jonathar@broadcom.com>
This defconfig is utilized so a customer or developer can understand
what kernel drivers are utilized by the Cygnus SoC. It also enables
debug configs which should be disabled if optimal performance is
desired.
Tested-by: Jonathan Richardson <jonathar@broadcom.com>
Reviewed-by: JD (Jiandong) Zheng <jdzheng@broadcom.com>
Signed-off-by: Scott Branden <sbranden@broadcom.com>
---
arch/arm/configs/bcm_cygnus_defconfig | 237 +++++++++++++++++++++++++++++++++
1 file changed, 237 insertions(+)
create mode 100644 arch/arm/configs/bcm_cygnus_defconfig
diff --git a/arch/arm/configs/bcm_cygnus_defconfig b/arch/arm/configs/bcm_cygnus_defconfig
new file mode 100644
index 0000000..9ad77a8
--- /dev/null
+++ b/arch/arm/configs/bcm_cygnus_defconfig
@@ -0,0 +1,237 @@
+CONFIG_KERNEL_XZ=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_FHANDLE=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=19
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_BLK_CGROUP=y
+CONFIG_NAMESPACES=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_JUMP_LABEL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_ARCH_BCM=y
+CONFIG_ARCH_BCM_CYGNUS=y
+CONFIG_ARM_THUMBEE=y
+CONFIG_PCI=y
+CONFIG_PCI_DEBUG=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
+# CONFIG_COMPACTION is not set
+# CONFIG_ATAGS is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_CPU_IDLE=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+# CONFIG_SUSPEND is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_TCP_CONG_ADVANCED=y
+# CONFIG_TCP_CONG_BIC is not set
+# CONFIG_TCP_CONG_WESTWOOD is not set
+# CONFIG_TCP_CONG_HTCP is not set
+CONFIG_IPV6=y
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_IPV6_SIT is not set
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_NETFILTER=y
+# CONFIG_BRIDGE_NETFILTER is not set
+CONFIG_NF_CONNTRACK=y
+# CONFIG_NF_CONNTRACK_PROCFS is not set
+CONFIG_NF_CONNTRACK_FTP=y
+CONFIG_NF_CONNTRACK_IPV4=y
+CONFIG_IP_NF_IPTABLES=y
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=y
+CONFIG_IP_NF_NAT=y
+CONFIG_IP_NF_TARGET_MASQUERADE=y
+CONFIG_IP_NF_TARGET_REDIRECT=y
+CONFIG_IP_NF_MANGLE=y
+CONFIG_IP_NF_RAW=y
+CONFIG_NF_CONNTRACK_IPV6=y
+CONFIG_IP6_NF_IPTABLES=y
+CONFIG_IP6_NF_MATCH_AH=y
+CONFIG_IP6_NF_MATCH_EUI64=y
+CONFIG_IP6_NF_MATCH_FRAG=y
+CONFIG_IP6_NF_MATCH_OPTS=y
+CONFIG_IP6_NF_MATCH_IPV6HEADER=y
+CONFIG_IP6_NF_MATCH_MH=y
+CONFIG_IP6_NF_MATCH_RT=y
+CONFIG_IP6_NF_FILTER=y
+CONFIG_IP6_NF_TARGET_REJECT=y
+CONFIG_IP6_NF_MANGLE=y
+CONFIG_IP6_NF_RAW=y
+CONFIG_BRIDGE=y
+# CONFIG_BRIDGE_IGMP_SNOOPING is not set
+CONFIG_VLAN_8021Q=y
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_FQ_CODEL=y
+CONFIG_CFG80211=y
+# CONFIG_CFG80211_DEFAULT_PS is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_RFKILL=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_PHYLIB=y
+CONFIG_BROADCOM_PHY=y
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_HELPER_AUTO is not set
+CONFIG_I2C_SMBUS=y
+CONFIG_SPI=y
+CONFIG_SPI_PL022=y
+CONFIG_SPI_SPIDEV=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_ARM_SP805_WATCHDOG=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_USB_SUPPORT=y
+CONFIG_USB_VIDEO_CLASS=y
+# CONFIG_USB_GSPCA is not set
+CONFIG_FB=y
+CONFIG_FB_ARMCLCD=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_PWM=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_DYNAMIC_MINORS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+CONFIG_SND_USB_AUDIO=y
+CONFIG_SND_SOC=y
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_STORAGE=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_OF_ARASAN=y
+CONFIG_RTC_CLASS=y
+CONFIG_PWM=y
+CONFIG_EXT4_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_UBIFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_DEBUG_INFO=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_OBJECTS=y
+CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=110
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_SCHEDSTATS=y
+# CONFIG_DEBUG_PREEMPT is not set
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_ATOMIC_SLEEP=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_LL_UART_8250=y
+CONFIG_DEBUG_UART_PHYS=0x18023000
+CONFIG_DEBUG_UART_VIRT=0xf1023000
+CONFIG_EARLY_PRINTK=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
--
1.7.9.5
next prev parent reply other threads:[~2014-10-28 19:53 UTC|newest]
Thread overview: 265+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <Scott Branden <sbranden@broadcom.com>
2014-10-08 5:26 ` [PATCH V3 0/6] Add initial support for Broadcom Cygnus SoC Scott Branden
2014-10-08 5:27 ` [PATCH 1/6] ARM: cygnus: Initial " Scott Branden
2014-10-08 7:54 ` Arnd Bergmann
2014-10-08 12:27 ` Scott Branden
2014-10-08 13:28 ` Arnd Bergmann
2014-10-08 16:27 ` Scott Branden
2014-10-08 18:12 ` Arnd Bergmann
2014-10-08 18:45 ` Scott Branden
2014-10-08 22:16 ` Scott Branden
2014-10-09 7:32 ` Arnd Bergmann
2014-10-08 8:11 ` Russell King - ARM Linux
2014-10-08 11:17 ` Scott Branden
2014-10-08 11:41 ` Russell King - ARM Linux
2014-10-08 13:10 ` Rob Herring
2014-10-08 16:34 ` Scott Branden
2014-10-08 5:27 ` [PATCH 2/6] clk: Clock driver " Scott Branden
2014-10-08 5:27 ` [PATCH 3/6] dt-bindings: Document Broadcom Cygnus SoC and clock driver Scott Branden
2014-10-08 7:57 ` Arnd Bergmann
2014-10-08 10:58 ` Scott Branden
2014-10-08 13:35 ` Arnd Bergmann
2014-10-08 5:27 ` [PATCH 4/6] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC Scott Branden
2014-10-08 7:58 ` Arnd Bergmann
2014-10-08 11:01 ` Scott Branden
2014-10-08 5:27 ` [PATCH 5/6] ARM: dts: Enable " Scott Branden
2014-10-08 5:27 ` [PATCH 6/6] MAINTAINERS: Entry for Cygnus/iproc arm architecture and clock drivers Scott Branden
2014-10-09 22:44 ` [PATCH V4 0/7] Add initial support for Broadcom Cygnus SoC Scott Branden
2014-10-09 22:44 ` [PATCH V4 1/7] ARM: cygnus: Initial " Scott Branden
2014-10-10 9:50 ` Arnd Bergmann
2014-10-10 19:08 ` Scott Branden
2014-10-09 22:44 ` [PATCH V4 2/7] clk: Clock driver " Scott Branden
2014-10-09 22:44 ` [PATCH V4 3/7] dt-bindings: Document Broadcom Cygnus SoC and clock driver Scott Branden
2014-10-09 22:44 ` [PATCH V4 4/7] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC Scott Branden
2014-10-09 22:44 ` [PATCH V4 5/7] ARM: dts: Enable " Scott Branden
2014-10-10 10:08 ` Arnd Bergmann
2014-10-10 19:11 ` Scott Branden
2014-10-09 22:44 ` [PATCH V4 6/7] MAINTAINERS: Entry for Cygnus/iproc arm architecture and clock drivers Scott Branden
2014-10-09 23:00 ` Joe Perches
2014-10-09 23:18 ` Scott Branden
2014-10-09 22:44 ` [PATCH V4 7/7] ARM: multi_v7_defconfig: Enable ARCH_BCM_CYGNUS config Scott Branden
2014-10-10 9:59 ` Arnd Bergmann
2014-10-10 19:12 ` Scott Branden
2014-10-15 2:01 ` [PATCH 0/1] sdhci-bcm2835: added quirk and removed udelay in write ops Scott Branden
2014-10-15 2:01 ` [PATCH 1/1] mmc: " Scott Branden
2014-10-17 2:50 ` Stephen Warren
2014-10-15 2:58 ` [PATCH v5 0/6] Add initial support for Broadcom Cygnus SoC Scott Branden
2014-10-15 2:58 ` [PATCH v5 1/6] ARM: cygnus: Initial " Scott Branden
2014-10-20 19:55 ` Arnd Bergmann
2014-10-20 22:59 ` Scott Branden
2014-10-21 5:48 ` Arnd Bergmann
2014-10-22 0:11 ` Scott Branden
2014-10-22 8:22 ` Arnd Bergmann
2014-10-22 17:12 ` Scott Branden
2014-10-15 2:58 ` [PATCH v5 2/6] dt-bindings: Document Broadcom Cygnus SoC and clocks Scott Branden
2014-10-15 2:58 ` [PATCH v5 3/6] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC Scott Branden
2014-10-15 2:58 ` [PATCH v5 4/6] ARM: dts: Enable " Scott Branden
2014-10-15 2:58 ` [PATCH v5 5/6] MAINTAINERS: Entry for Cygnus/iproc arm architecture Scott Branden
2014-10-15 2:58 ` [PATCH v5 6/6] ARM: mach-bcm: Consolidate currently supported IPROC SoCs Scott Branden
2014-10-15 15:54 ` [PATCH 1/1] MAINTAINERS: corrected bcm2835 search Scott Branden
2014-10-15 18:12 ` Stephen Warren
2014-10-15 16:43 ` [PATCH 1/1] mmc: sdhci-bcm2835: added quirk and removed udelay in write ops Scott Branden
2014-10-18 2:37 ` Stephen Warren
2014-10-18 6:40 ` Scott Branden
2014-10-22 2:09 ` [PATCH v6 0/6] Add initial support for Broadcom Cygnus SoC Scott Branden
2014-10-22 2:09 ` [PATCH v6 1/6] ARM: cygnus: Initial " Scott Branden
2014-10-22 2:09 ` [PATCH v6 2/6] dt-bindings: Document Broadcom Cygnus SoC and clocks Scott Branden
2014-10-22 2:09 ` [PATCH v6 3/6] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC Scott Branden
2014-10-22 2:09 ` [PATCH v6 4/6] ARM: dts: Enable " Scott Branden
2014-10-22 2:09 ` [PATCH v6 5/6] MAINTAINERS: Entry for Cygnus/iproc arm architecture Scott Branden
2014-10-22 2:09 ` [PATCH v6 6/6] ARM: mach-bcm: Consolidate currently supported IPROC SoCs Scott Branden
2014-10-22 20:57 ` [PATCH v7 0/7] Add initial support for Broadcom Cygnus SoC Scott Branden
2014-10-22 20:57 ` [PATCH v7 1/7] ARM: cygnus: Initial " Scott Branden
2014-10-22 20:57 ` [PATCH v7 2/7] dt-bindings: Document Broadcom Cygnus SoC and clocks Scott Branden
2014-10-22 20:57 ` [PATCH v7 3/7] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC Scott Branden
2014-10-22 20:57 ` [PATCH v7 4/7] ARM: dts: Enable " Scott Branden
2014-10-28 16:10 ` Arnd Bergmann
2014-10-28 19:41 ` Scott Branden
2014-10-22 20:57 ` [PATCH v7 5/7] MAINTAINERS: Entry for Cygnus/iproc arm architecture Scott Branden
2014-10-22 20:57 ` [PATCH v7 6/7] ARM: mach-bcm: Consolidate currently supported IPROC SoCs Scott Branden
2014-10-22 20:57 ` [PATCH v7 7/7] ARM: mach-bcm: ARCH_BCM_MOBILE: remove one level of menu from Kconfig Scott Branden
2014-10-28 19:53 ` [PATCH v8 0/8] Add initial support for Broadcom Cygnus SoC Scott Branden
2014-10-28 19:53 ` [PATCH v8 1/8] ARM: cygnus: Initial " Scott Branden
2014-10-28 19:53 ` [PATCH v8 2/8] dt-bindings: Document Broadcom Cygnus SoC and clocks Scott Branden
2014-10-28 19:53 ` Scott Branden [this message]
2014-10-28 19:53 ` [PATCH v8 4/8] ARM: dts: Enable Broadcom Cygnus SoC Scott Branden
2014-11-09 0:22 ` Olof Johansson
2014-11-09 6:13 ` Scott Branden
2014-11-09 6:49 ` Olof Johansson
2014-11-09 17:23 ` Greg Kroah-Hartman
2014-11-09 20:38 ` Arnd Bergmann
2014-11-10 5:17 ` Scott Branden
2014-11-10 8:11 ` Arnd Bergmann
2014-11-10 18:28 ` Scott Branden
2014-10-28 19:53 ` [PATCH v8 5/8] MAINTAINERS: Entry for Cygnus/iproc arm architecture Scott Branden
2014-10-28 19:53 ` [PATCH v8 6/8] ARM: mach-bcm: Consolidate currently supported IPROC SoCs Scott Branden
2014-10-28 19:53 ` [PATCH v8 7/8] ARM: mach-bcm: ARCH_BCM_MOBILE: remove one level of menu from Kconfig Scott Branden
2014-10-28 19:53 ` [PATCH v8 8/8] ARM: multi_v7_defconfig: Enable Broadcom Cygnus Scott Branden
2014-10-28 20:01 ` Arnd Bergmann
2014-10-28 20:06 ` Scott Branden
2014-10-28 20:13 ` Arnd Bergmann
2014-10-28 23:15 ` [PATCH v9 0/8] Add initial support for Broadcom Cygnus SoC Scott Branden
2014-10-28 23:15 ` [PATCH v9 1/8] ARM: cygnus: Initial " Scott Branden
2014-10-28 23:15 ` [PATCH v9 2/8] dt-bindings: Document Broadcom Cygnus SoC and clocks Scott Branden
2014-11-20 1:05 ` Mike Turquette
2014-10-28 23:15 ` [PATCH v9 3/8] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC Scott Branden
2014-10-28 23:15 ` [PATCH v9 4/8] ARM: dts: Enable " Scott Branden
2014-11-10 10:50 ` Paul Bolle
2014-11-10 18:35 ` Olof Johansson
2014-11-10 19:23 ` Paul Bolle
2014-10-28 23:15 ` [PATCH v9 5/8] MAINTAINERS: Entry for Cygnus/iproc arm architecture Scott Branden
2014-10-28 23:15 ` [PATCH v9 6/8] ARM: mach-bcm: Consolidate currently supported IPROC SoCs Scott Branden
2014-10-28 23:15 ` [PATCH v9 7/8] ARM: mach-bcm: ARCH_BCM_MOBILE: remove one level of menu from Kconfig Scott Branden
2014-10-28 23:15 ` [PATCH v9 8/8] ARM: multi_v7_defconfig: Enable Broadcom Cygnus Scott Branden
2014-10-30 6:36 ` [PATCHv2 0/5] sdhci-bcm2835: added quirk and removed udelay in write ops Scott Branden
2014-10-30 6:36 ` [PATCHv2 1/5] mmc: sdhci-bcm2835: group read and write functions to improve readability Scott Branden
2014-10-30 6:36 ` [PATCHv2 2/5] mmc: sdhci-bcm2835: make shift calculations consistent Scott Branden
2014-11-05 4:48 ` Stephen Warren
2014-11-05 5:19 ` Scott Branden
2014-10-30 6:36 ` [PATCHv2 3/5] mmc: shdci-bcm2835: add efficient back-to-back write workaround Scott Branden
2014-11-05 4:57 ` Stephen Warren
2014-11-05 6:55 ` Scott Branden
2014-11-06 4:48 ` Stephen Warren
2014-11-07 18:29 ` Scott Branden
2014-10-30 6:36 ` [PATCHv2 4/5] mmc: shdci-bcm2835: add verify for 32-bit back-to-back workaround Scott Branden
2014-11-05 4:44 ` Stephen Warren
2014-11-05 5:26 ` Scott Branden
2014-11-05 4:59 ` Stephen Warren
2014-11-05 7:00 ` Scott Branden
2014-11-06 5:01 ` Stephen Warren
2014-11-07 18:31 ` Scott Branden
2015-12-22 15:55 ` Stefan Wahren
2015-12-22 19:23 ` Scott Branden
2015-12-22 20:13 ` Stefan Wahren
2014-10-30 6:36 ` [PATCHv2 5/5] mmc: sdhci-bcm2835: add sdhci quirk SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 Scott Branden
2014-11-05 5:00 ` Stephen Warren
2014-11-05 7:02 ` Scott Branden
2014-11-06 4:50 ` Stephen Warren
2014-11-07 18:30 ` Scott Branden
2014-11-10 5:55 ` [PATCH 1/2] ARM: multi_v7_defconfig: remove one level of menu from Kconfig Scott Branden
2014-11-10 5:55 ` [PATCH 2/2] ARM: multi_v7_defconfig: Enable Broadcom Cygnus Scott Branden
2014-11-14 18:29 ` [PATCH 0/4] pwm: kona: Drivers fixes Scott Branden
2014-11-14 18:29 ` [PATCH 1/4] pwm: kona: Remove setting default smooth type and polarity for all channels Scott Branden
2014-11-14 18:29 ` [PATCH 2/4] pwm: kona: Fix incorrect enable after channel polarity change Scott Branden
2014-11-14 18:29 ` [PATCH 3/4] pwm: kona: Fix enable, disable and config procedures Scott Branden
2014-11-14 18:30 ` [PATCH 4/4] pwm: kona: Update dependency to ARCH_BCM Scott Branden
2014-11-17 12:52 ` Thierry Reding
2014-11-17 17:33 ` Scott Branden
2014-11-17 12:41 ` [PATCH 0/4] pwm: kona: Drivers fixes Thierry Reding
2014-11-20 19:18 ` [PATCH] mtd: nand: added nand_shutdown Scott Branden
2014-11-26 9:10 ` Brian Norris
2014-11-27 18:28 ` Scott Branden
2014-11-28 0:30 ` Scott Branden
2014-12-04 22:38 ` Scott Branden
2014-11-25 19:40 ` [PATCH v2 0/4] pwm: kona: Drivers fixes Scott Branden
2014-11-25 19:40 ` [PATCH v2 1/4] pwm: kona: Remove setting default smooth type and polarity for all channels Scott Branden
2014-11-26 5:51 ` Tim Kryger
2014-11-28 23:47 ` Arun Ramamurthy
2014-11-29 1:08 ` Tim Kryger
2014-11-29 1:19 ` Arun Ramamurthy
2014-11-29 3:19 ` Tim Kryger
2014-12-01 19:37 ` Arun Ramamurthy
2014-12-04 20:22 ` Jonathan Richardson
2014-12-06 23:13 ` Tim Kryger
2014-12-10 19:57 ` Jonathan Richardson
2014-11-25 19:40 ` [PATCH v2 2/4] pwm: kona: Fix incorrect enable after channel polarity change Scott Branden
2014-11-26 6:22 ` Tim Kryger
2014-11-28 23:48 ` Arun Ramamurthy
2014-11-29 2:02 ` Tim Kryger
2014-12-04 20:33 ` Jonathan Richardson
2014-11-25 19:40 ` [PATCH v2 3/4] pwm: kona: Fix enable, disable and config procedures Scott Branden
2014-11-26 7:29 ` Tim Kryger
2014-11-27 23:30 ` Scott Branden
2014-11-28 23:49 ` Arun Ramamurthy
2014-11-29 2:30 ` Tim Kryger
2014-12-01 19:37 ` Arun Ramamurthy
2014-12-02 4:29 ` Tim Kryger
2014-12-04 20:26 ` Jonathan Richardson
2014-11-25 19:40 ` [PATCH v2 4/4] pwm: kona: Update dependency to ARCH_BCM Scott Branden
2014-12-04 22:37 ` [PATCH] mtd: add reboot notifier to mtdcore and register nand_shutdown with notifier Scott Branden
2014-12-05 0:13 ` Scott Branden
2014-12-05 2:31 ` Brian Norris
2014-12-05 0:11 ` [PATCH] mmc: sdhci: add quirk for ACMD23 broken Scott Branden
2014-12-05 0:16 ` [PATCH v2] " Scott Branden
2014-12-17 18:36 ` Scott Branden
2014-12-17 19:48 ` Chris Ball
2014-12-17 20:42 ` Scott Branden
2015-02-10 0:06 ` [PATCH 0/4] Add support for IPROC SDHCI controller Scott Branden
2015-02-10 0:06 ` [PATCH 1/4] mmc: sdhci: add quirk for ACMD23 broken Scott Branden
2015-02-10 0:06 ` [PATCH 2/4] mmc: sdhci: do not set AUTO_CMD12 for multi-block CMD53 Scott Branden
2015-02-10 0:06 ` [PATCH 3/4] mmc: sdhci-iproc: add IPROC SDHCI driver Scott Branden
2015-02-10 0:06 ` [PATCH 4/4] mmc: sdhci-iproc: add device tree bindings Scott Branden
2015-03-02 23:50 ` Florian Fainelli
2015-03-04 23:14 ` Scott Branden
2015-02-26 17:28 ` [PATCH 0/4] Add support for IPROC SDHCI controller Scott Branden
2015-02-10 0:07 ` [PATCH 0/2] Add support for Broadcom RNG200 Scott Branden
2015-02-10 0:07 ` [PATCH 1/2] hwrng: iproc-rng200 - Add Broadcom IPROC RNG driver Scott Branden
2015-02-10 0:27 ` Joe Perches
2015-02-14 16:36 ` Scott Branden
2015-02-14 17:02 ` Scott Branden
2015-02-10 0:07 ` [PATCH 2/2] hwrng: iproc-rng200 - Add device tree bindings Scott Branden
2015-02-10 0:07 ` [PATCH 0/2] Add support for Broadcom keypad controller Scott Branden
2015-02-10 0:07 ` [PATCH 1/2] Input: bcm-keypad: add device tree bindings Scott Branden
2015-02-10 0:51 ` Dmitry Torokhov
2015-02-14 16:49 ` Scott Branden
2015-02-16 5:17 ` Dmitry Torokhov
2015-02-23 17:49 ` Dmitry Torokhov
2015-02-26 16:13 ` Scott Branden
2015-02-10 0:07 ` [PATCH 2/2] Input: bcm-keypad: Add Broadcom keypad controller Scott Branden
2015-02-10 1:02 ` Dmitry Torokhov
2015-02-14 17:12 ` Scott Branden
2015-02-25 18:16 ` [PATCH v2 0/2] Add support for Broadcom RNG200 Scott Branden
2015-02-25 18:16 ` [PATCH v2 1/2] hwrng: iproc-rng200 - Add device tree bindings Scott Branden
2015-03-02 23:47 ` Florian Fainelli
2015-02-25 18:16 ` [PATCH v2 2/2] hwrng: iproc-rng200 - Add Broadcom IPROC RNG driver Scott Branden
2015-02-25 18:43 ` Dmitry Torokhov
2015-03-03 0:50 ` Scott Branden
2015-02-25 19:17 ` Arnd Bergmann
2015-02-26 19:37 ` Scott Branden
2015-02-26 20:15 ` Arnd Bergmann
2015-02-26 22:26 ` Scott Branden
2015-02-27 9:14 ` Arnd Bergmann
2015-02-28 16:01 ` Scott Branden
2015-02-28 19:31 ` Arnd Bergmann
2015-03-02 19:41 ` Scott Branden
2015-03-02 10:23 ` [PATCH v2 0/2] Add support for Broadcom RNG200 Herbert Xu
2015-02-26 16:08 ` [PATCH v2 0/2] Add support for Broadcom keypad controller Scott Branden
2015-02-26 16:08 ` [PATCH v2 1/2] Input: bcm-keypad: add device tree bindings Scott Branden
2015-02-27 23:39 ` Dmitry Torokhov
2015-02-28 15:41 ` Scott Branden
2015-02-26 16:08 ` [PATCH v2 2/2] Input: bcm-keypad: Add Broadcom keypad controller Scott Branden
2015-02-27 23:44 ` Dmitry Torokhov
2015-02-28 15:52 ` Scott Branden
2015-02-28 14:16 ` Paul Bolle
2015-02-28 15:36 ` Scott Branden
2015-02-28 16:03 ` [PATCH v3 0/2] Add support for " Scott Branden
2015-02-28 16:03 ` [PATCH v3 1/2] Input: bcm-keypad: add device tree bindings Scott Branden
2015-02-28 16:03 ` [PATCH v3 2/2] Input: bcm-keypad: Add Broadcom keypad controller Scott Branden
2015-02-28 16:35 ` [PATCH v4 0/2] Add support for " Scott Branden
2015-02-28 16:35 ` [PATCH v4 1/2] Input: bcm-keypad: add device tree bindings Scott Branden
2015-03-03 0:04 ` Dmitry Torokhov
2015-02-28 16:35 ` [PATCH v4 2/2] Input: bcm-keypad: Add Broadcom keypad controller Scott Branden
2015-02-28 22:10 ` Dmitry Torokhov
2015-02-28 22:15 ` Dmitry Torokhov
2015-03-02 19:37 ` Scott Branden
2015-03-02 20:23 ` Dmitry Torokhov
2015-03-02 21:59 ` Scott Branden
2015-03-02 19:38 ` Scott Branden
2015-03-04 20:42 ` [PATCH v3 0/2] Add support for Broadcom RNG200 Scott Branden
2015-03-04 20:42 ` [PATCH v3 1/2] hwrng: iproc-rng200 - Add device tree bindings Scott Branden
2015-03-04 20:42 ` [PATCH v3 2/2] hwrng: iproc-rng200 - Add Broadcom IPROC RNG driver Scott Branden
2015-03-06 11:53 ` [PATCH v3 0/2] Add support for Broadcom RNG200 Herbert Xu
2015-03-05 15:59 ` [PATCH RESEND 0/4] Add support for IPROC SDHCI controller Scott Branden
2015-03-05 15:59 ` [PATCH 1/4] mmc: sdhci: add quirk for ACMD23 broken Scott Branden
2015-03-05 15:59 ` [PATCH 2/4] mmc: sdhci: do not set AUTO_CMD12 for multi-block CMD53 Scott Branden
2015-03-05 15:59 ` [PATCH 3/4] mmc: sdhci-iproc: add IPROC SDHCI driver Scott Branden
2015-03-05 15:59 ` [PATCH 4/4] mmc: sdhci-iproc: add device tree bindings Scott Branden
2015-03-05 16:16 ` [PATCH RESEND 0/4] Add support for IPROC SDHCI controller Ulf Hansson
2015-03-05 19:57 ` Florian Fainelli
2015-03-10 18:35 ` [PATCH] mmc: sdhci: fix card presence logic in sdhci_request function Scott Branden
2015-03-13 10:14 ` Ulf Hansson
2015-03-16 17:59 ` [PATCH] wireless: rt2x00: add new rt2800usb device DWA 130 Scott Branden
2015-03-20 6:45 ` Kalle Valo
2015-03-16 18:19 ` [PATCH] ARM: amba: Increase number of IRQs Scott Branden
2015-03-16 21:08 ` Russell King - ARM Linux
2015-03-16 21:18 ` Scott Branden
2015-03-16 21:16 ` [PATCH v2 1/1] " Scott Branden
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1414525992-3678-4-git-send-email-sbranden@broadcom.com \
--to=sbranden@broadcom.com \
--cc=akpm@linux-foundation.org \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=bcm@fixthebug.org \
--cc=crope@iki.fi \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=elder@linaro.org \
--cc=galak@codeaurora.org \
--cc=gregkh@linuxfoundation.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=jdzheng@broadcom.com \
--cc=joe@perches.com \
--cc=jonathar@broadcom.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=m.chehab@samsung.com \
--cc=mark.rutland@arm.com \
--cc=mporter@linaro.org \
--cc=mturquette@linaro.org \
--cc=pawel.moll@arm.com \
--cc=rjui@broadcom.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).