From: Heikki Krogerus <heikki.krogerus@linux.intel.com>
To: Felipe Balbi <balbi@ti.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Baolu Lu <baolu.lu@linux.intel.com>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 3/8] usb: dwc3: store driver data earlier
Date: Fri, 23 Jan 2015 17:12:53 +0200 [thread overview]
Message-ID: <1422025978-178336-4-git-send-email-heikki.krogerus@linux.intel.com> (raw)
In-Reply-To: <1422025978-178336-1-git-send-email-heikki.krogerus@linux.intel.com>
We need to store it before phys are handled, so we can later
use it in ULPI interface support code.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
---
drivers/usb/dwc3/core.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 25ddc39..b06e88b 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -876,12 +876,13 @@ static int dwc3_probe(struct platform_device *pdev)
dwc->hird_threshold = hird_threshold
| (dwc->is_utmi_l1_suspend << 4);
+ platform_set_drvdata(pdev, dwc);
+
ret = dwc3_core_get_phy(dwc);
if (ret)
return ret;
spin_lock_init(&dwc->lock);
- platform_set_drvdata(pdev, dwc);
if (!dev->dma_mask) {
dev->dma_mask = dev->parent->dma_mask;
--
2.1.4
next prev parent reply other threads:[~2015-01-23 15:14 UTC|newest]
Thread overview: 70+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-23 15:12 [PATCH 0/8] usb: ulpi bus Heikki Krogerus
2015-01-23 15:12 ` [PATCH 1/8] usb: add bus type for USB ULPI Heikki Krogerus
2015-01-29 5:02 ` Felipe Balbi
2015-01-29 14:18 ` Heikki Krogerus
2015-02-13 1:44 ` Stephen Boyd
2015-02-13 11:24 ` Heikki Krogerus
2015-01-23 15:12 ` [PATCH 2/8] usb: dwc3: USB2 PHY register access bits Heikki Krogerus
2015-01-23 15:12 ` Heikki Krogerus [this message]
2015-01-23 15:12 ` [PATCH 4/8] usb: dwc3: cache hwparams earlier Heikki Krogerus
2015-01-23 15:12 ` [PATCH 5/8] usb: dwc3: ULPI or UTMI+ select Heikki Krogerus
2015-01-23 15:12 ` [PATCH 6/8] usb: dwc3: add ULPI interface support Heikki Krogerus
2015-01-23 16:24 ` Felipe Balbi
2015-01-26 11:46 ` Heikki Krogerus
2015-01-26 19:35 ` Felipe Balbi
2015-01-27 11:09 ` Heikki Krogerus
2015-01-27 15:24 ` Felipe Balbi
2015-02-11 19:34 ` David Cohen
2015-02-12 12:12 ` Heikki Krogerus
2015-02-13 1:41 ` David Cohen
2015-02-13 1:54 ` David Cohen
2015-02-13 13:16 ` Heikki Krogerus
2015-02-13 22:03 ` David Cohen
2015-02-13 22:04 ` Felipe Balbi
2015-01-23 15:12 ` [PATCH 7/8] phy: helpers for USB ULPI PHY registering Heikki Krogerus
2015-01-29 5:03 ` Felipe Balbi
2015-01-29 14:34 ` Heikki Krogerus
2015-01-29 16:11 ` Felipe Balbi
2015-01-30 10:33 ` Heikki Krogerus
2015-01-30 16:03 ` Felipe Balbi
2015-01-23 15:12 ` [PATCH 8/8] phy: add driver for TI TUSB1210 ULPI PHY Heikki Krogerus
2015-01-24 23:58 ` David Cohen
2015-01-26 12:55 ` Heikki Krogerus
2015-01-26 19:23 ` David Cohen
2015-01-27 9:28 ` Heikki Krogerus
2015-01-27 12:57 ` Heikki Krogerus
2015-01-27 17:38 ` David Cohen
2015-01-28 14:20 ` Heikki Krogerus
2015-01-28 18:02 ` David Cohen
2015-01-29 14:14 ` Heikki Krogerus
2015-01-29 16:20 ` Felipe Balbi
2015-01-29 18:02 ` David Cohen
2015-01-30 12:18 ` Heikki Krogerus
2015-01-30 16:09 ` David Cohen
2015-02-02 12:50 ` Heikki Krogerus
2015-01-30 9:29 ` Heikki Krogerus
2015-01-30 16:14 ` Felipe Balbi
2015-01-30 16:25 ` David Cohen
2015-01-30 16:30 ` Felipe Balbi
2015-01-30 16:20 ` David Cohen
2015-01-30 16:33 ` Felipe Balbi
2015-02-02 12:59 ` Heikki Krogerus
2015-02-03 11:37 ` Heikki Krogerus
2015-02-10 18:33 ` David Cohen
2015-02-10 19:05 ` David Cohen
2015-02-10 19:23 ` David Cohen
2015-02-11 13:12 ` Heikki Krogerus
2015-02-11 19:36 ` David Cohen
2015-02-13 22:02 ` David Cohen
2015-02-13 22:03 ` Felipe Balbi
2015-02-13 22:13 ` David Cohen
2015-01-29 5:09 ` Felipe Balbi
2015-01-29 14:30 ` Heikki Krogerus
2015-01-29 16:20 ` Felipe Balbi
2015-01-29 18:04 ` David Cohen
2015-01-29 18:25 ` David Cohen
2015-01-29 18:47 ` David Cohen
2015-01-30 10:30 ` Heikki Krogerus
2015-02-13 1:52 ` David Cohen
2015-02-13 12:35 ` Heikki Krogerus
2015-02-13 16:01 ` Felipe Balbi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1422025978-178336-4-git-send-email-heikki.krogerus@linux.intel.com \
--to=heikki.krogerus@linux.intel.com \
--cc=balbi@ti.com \
--cc=baolu.lu@linux.intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).