From: Heikki Krogerus <heikki.krogerus@linux.intel.com>
To: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Baolu Lu <baolu.lu@linux.intel.com>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/8] usb: add bus type for USB ULPI
Date: Thu, 29 Jan 2015 16:18:25 +0200 [thread overview]
Message-ID: <20150129141825.GB2570@kuha.fi.intel.com> (raw)
In-Reply-To: <20150129050237.GA9098@saruman.tx.rr.com>
On Wed, Jan 28, 2015 at 11:02:37PM -0600, Felipe Balbi wrote:
> Hi,
>
> On Fri, Jan 23, 2015 at 05:12:51PM +0200, Heikki Krogerus wrote:
> > @@ -6,4 +6,5 @@ obj-$(CONFIG_USB_COMMON) += usb-common.o
> > usb-common-y += common.o
> > usb-common-$(CONFIG_USB_LED_TRIG) += led.o
> >
> > -obj-$(CONFIG_USB_OTG_FSM) += usb-otg-fsm.o
> > +obj-$(CONFIG_USB_OTG_FSM) += usb-otg-fsm.o
>
> a bit of unrelated change here.
OK
> > diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
> > index cc0ced0..c0fc3b5 100644
> > --- a/drivers/usb/core/Kconfig
> > +++ b/drivers/usb/core/Kconfig
> > @@ -84,3 +84,11 @@ config USB_OTG_FSM
> > Implements OTG Finite State Machine as specified in On-The-Go
> > and Embedded Host Supplement to the USB Revision 2.0 Specification.
> >
> > +config USB_ULPI_BUS
> > + bool "USB ULPI PHY interface support"
> > + depends on USB || USB_GADGET
>
> depends on USB_SUPPORT ?
sure
> > +int ulpi_register_driver(struct ulpi_driver *drv);
> > +void ulpi_unregister_driver(struct ulpi_driver *drv);
> > +
> > +#define module_ulpi_driver(__ulpi_driver) \
> > + module_driver(__ulpi_driver, ulpi_register_driver, \
> > + ulpi_unregister_driver)
> > +
> > +int ulpi_read(struct ulpi *ulpi, u8 addr);
> > +int ulpi_write(struct ulpi *ulpi, u8 addr, u8 val);
>
> no stubs ?
Is there really need for them? Well, I'll add them.
Thanks,
--
heikki
next prev parent reply other threads:[~2015-01-29 14:20 UTC|newest]
Thread overview: 70+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-23 15:12 [PATCH 0/8] usb: ulpi bus Heikki Krogerus
2015-01-23 15:12 ` [PATCH 1/8] usb: add bus type for USB ULPI Heikki Krogerus
2015-01-29 5:02 ` Felipe Balbi
2015-01-29 14:18 ` Heikki Krogerus [this message]
2015-02-13 1:44 ` Stephen Boyd
2015-02-13 11:24 ` Heikki Krogerus
2015-01-23 15:12 ` [PATCH 2/8] usb: dwc3: USB2 PHY register access bits Heikki Krogerus
2015-01-23 15:12 ` [PATCH 3/8] usb: dwc3: store driver data earlier Heikki Krogerus
2015-01-23 15:12 ` [PATCH 4/8] usb: dwc3: cache hwparams earlier Heikki Krogerus
2015-01-23 15:12 ` [PATCH 5/8] usb: dwc3: ULPI or UTMI+ select Heikki Krogerus
2015-01-23 15:12 ` [PATCH 6/8] usb: dwc3: add ULPI interface support Heikki Krogerus
2015-01-23 16:24 ` Felipe Balbi
2015-01-26 11:46 ` Heikki Krogerus
2015-01-26 19:35 ` Felipe Balbi
2015-01-27 11:09 ` Heikki Krogerus
2015-01-27 15:24 ` Felipe Balbi
2015-02-11 19:34 ` David Cohen
2015-02-12 12:12 ` Heikki Krogerus
2015-02-13 1:41 ` David Cohen
2015-02-13 1:54 ` David Cohen
2015-02-13 13:16 ` Heikki Krogerus
2015-02-13 22:03 ` David Cohen
2015-02-13 22:04 ` Felipe Balbi
2015-01-23 15:12 ` [PATCH 7/8] phy: helpers for USB ULPI PHY registering Heikki Krogerus
2015-01-29 5:03 ` Felipe Balbi
2015-01-29 14:34 ` Heikki Krogerus
2015-01-29 16:11 ` Felipe Balbi
2015-01-30 10:33 ` Heikki Krogerus
2015-01-30 16:03 ` Felipe Balbi
2015-01-23 15:12 ` [PATCH 8/8] phy: add driver for TI TUSB1210 ULPI PHY Heikki Krogerus
2015-01-24 23:58 ` David Cohen
2015-01-26 12:55 ` Heikki Krogerus
2015-01-26 19:23 ` David Cohen
2015-01-27 9:28 ` Heikki Krogerus
2015-01-27 12:57 ` Heikki Krogerus
2015-01-27 17:38 ` David Cohen
2015-01-28 14:20 ` Heikki Krogerus
2015-01-28 18:02 ` David Cohen
2015-01-29 14:14 ` Heikki Krogerus
2015-01-29 16:20 ` Felipe Balbi
2015-01-29 18:02 ` David Cohen
2015-01-30 12:18 ` Heikki Krogerus
2015-01-30 16:09 ` David Cohen
2015-02-02 12:50 ` Heikki Krogerus
2015-01-30 9:29 ` Heikki Krogerus
2015-01-30 16:14 ` Felipe Balbi
2015-01-30 16:25 ` David Cohen
2015-01-30 16:30 ` Felipe Balbi
2015-01-30 16:20 ` David Cohen
2015-01-30 16:33 ` Felipe Balbi
2015-02-02 12:59 ` Heikki Krogerus
2015-02-03 11:37 ` Heikki Krogerus
2015-02-10 18:33 ` David Cohen
2015-02-10 19:05 ` David Cohen
2015-02-10 19:23 ` David Cohen
2015-02-11 13:12 ` Heikki Krogerus
2015-02-11 19:36 ` David Cohen
2015-02-13 22:02 ` David Cohen
2015-02-13 22:03 ` Felipe Balbi
2015-02-13 22:13 ` David Cohen
2015-01-29 5:09 ` Felipe Balbi
2015-01-29 14:30 ` Heikki Krogerus
2015-01-29 16:20 ` Felipe Balbi
2015-01-29 18:04 ` David Cohen
2015-01-29 18:25 ` David Cohen
2015-01-29 18:47 ` David Cohen
2015-01-30 10:30 ` Heikki Krogerus
2015-02-13 1:52 ` David Cohen
2015-02-13 12:35 ` Heikki Krogerus
2015-02-13 16:01 ` Felipe Balbi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150129141825.GB2570@kuha.fi.intel.com \
--to=heikki.krogerus@linux.intel.com \
--cc=balbi@ti.com \
--cc=baolu.lu@linux.intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).