[PATCH 0/7] ARM: socfpga: Add support for Arria10 devkit

[PATCH 0/7] ARM: socfpga: Add support for Arria10 devkit

[dinguyen]

From: Dinh Nguyen <dinguyen@opensource.altera.com>

Hi,

This patchset enables and tidy up support for the Arria10 devkit. Along with
this patchset and the patch for enabling clocks on the Arria10, the devkit
can boot Linux.

Dinh Nguyen (7):
  ARM: socfpga: add cpu1-start-addr for Arria 10
  ARM: socfpga: disable the sdmmc, and uart nodes in the base arria10
  ARM: socfpga: dts: enable UART1 for the debug uart
  ARM: socfpga: rename socdk board file to socdk_sdmmc
  ARM: socfpga: Add support for UART1 debug uart for earlyprintk
  ARM: socfpga: remove the need to map uart_io_desc
  Documentation: DT bindings: add doc for Altera's SoCFPGA platform

 Documentation/devicetree/bindings/arm/altera.txt   | 14 ++++++++++++
 arch/arm/Kconfig.debug                             | 25 +++++++++++++++------
 arch/arm/boot/dts/Makefile                         |  2 +-
 arch/arm/boot/dts/socfpga_arria10.dtsi             |  4 ++++
 ...rria10_socdk.dts => socfpga_arria10_socdk.dtsi} |  6 ++---
 arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts  | 26 ++++++++++++++++++++++
 arch/arm/mach-socfpga/socfpga.c                    |  9 --------
 7 files changed, 65 insertions(+), 21 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/arm/altera.txt
 rename arch/arm/boot/dts/{socfpga_arria10_socdk.dts => socfpga_arria10_socdk.dtsi} (92%)
 mode change 100755 => 100644
 create mode 100644 arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts

-- 
2.2.1

[PATCH 1/7] ARM: socfpga: add cpu1-start-addr for Arria 10

[dinguyen]

From: Dinh Nguyen <dinguyen@opensource.altera.com>

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
---
 arch/arm/boot/dts/socfpga_arria10.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi
index 8a05c47..69d616a 100644
--- a/arch/arm/boot/dts/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10.dtsi
@@ -284,6 +284,7 @@
 		sysmgr: sysmgr@ffd06000 {
 			compatible = "altr,sys-mgr", "syscon";
 			reg = <0xffd06000 0x300>;
+			cpu1-start-addr = <0xffd06230>;
 		};
 
 		/* Local timer */
-- 
2.2.1

[PATCH 2/7] ARM: socfpga: disable the sdmmc, and uart nodes in the base arria10

[dinguyen]

From: Dinh Nguyen <dinguyen@opensource.altera.com>

Add status = "disabled" in the base DTSI for Arria10.  The SDMMC and uart
nodes should be enabled in the appropriate board file.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
---
 arch/arm/boot/dts/socfpga_arria10.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi
index 69d616a..d843609 100644
--- a/arch/arm/boot/dts/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10.dtsi
@@ -268,6 +268,7 @@
 			reg = <0xff808000 0x1000>;
 			interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
 			fifo-depth = <0x400>;
+			status = "disabled";
 		};
 
 		ocram: sram@ffe00000 {
@@ -324,6 +325,7 @@
 			interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
+			status = "disabled";
 		};
 
 		uart1: serial1@ffc02100 {
@@ -332,6 +334,7 @@
 			interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
+			status = "disabled";
 		};
 
 		usbphy0: usbphy@0 {
-- 
2.2.1

[PATCH 3/7] ARM: socfpga: dts: enable UART1 for the debug uart

[dinguyen]

From: Dinh Nguyen <dinguyen@opensource.altera.com>

Arria10 devkit is using UART1 for the debug uart port.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
---
 arch/arm/boot/dts/socfpga_arria10_socdk.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dts b/arch/arm/boot/dts/socfpga_arria10_socdk.dts
index 3015ce8..addec61 100755
--- a/arch/arm/boot/dts/socfpga_arria10_socdk.dts
+++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dts
@@ -41,7 +41,7 @@
 			};
 		};
 
-		serial0@ffc02000 {
+		serial1@ffc02100 {
 			status = "okay";
 		};
 	};
-- 
2.2.1

[PATCH 4/7] ARM: socfpga: rename socdk board file to socdk_sdmmc

[dinguyen]

From: Dinh Nguyen <dinguyen@opensource.altera.com>

Rename the socfpga_arria10_socdk board file to socfpga_arria10_socdk_sdmmc
as Arria 10 devkit cannot support SDMMC and QSPI at the same time. Thus
we will need to have 2 separate board files, one for SDMMC and one for
QSPI. We also add a new base board dtsi file, socfpga_arria10_socdk.dtsi
so that we use common peripherals for each flavor of the devkits.

Add the sdmmc node to the socfpga_arria10_socdk_sdmmc.dts board file.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
---
 arch/arm/boot/dts/Makefile                         |  2 +-
 ...rria10_socdk.dts => socfpga_arria10_socdk.dtsi} |  4 +---
 arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts  | 26 ++++++++++++++++++++++
 3 files changed, 28 insertions(+), 4 deletions(-)
 rename arch/arm/boot/dts/{socfpga_arria10_socdk.dts => socfpga_arria10_socdk.dtsi} (94%)
 mode change 100755 => 100644
 create mode 100644 arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index a1c776b..e50441a 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -485,7 +485,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
 	r8a7794-alt.dtb
 dtb-$(CONFIG_ARCH_SOCFPGA) += \
 	socfpga_arria5_socdk.dtb \
-	socfpga_arria10_socdk.dtb \
+	socfpga_arria10_socdk_sdmmc.dtb \
 	socfpga_cyclone5_socdk.dtb \
 	socfpga_cyclone5_sockit.dtb \
 	socfpga_cyclone5_socrates.dtb \
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dts b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
old mode 100755
new mode 100644
similarity index 94%
rename from arch/arm/boot/dts/socfpga_arria10_socdk.dts
rename to arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
index addec61..2791f09
--- a/arch/arm/boot/dts/socfpga_arria10_socdk.dts
+++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2014 Altera Corporation <www.altera.com>
+ * Copyright (C) 2015 Altera Corporation <www.altera.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -14,8 +14,6 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-
-/dts-v1/;
 #include "socfpga_arria10.dtsi"
 
 / {
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts
new file mode 100644
index 0000000..dbbb751
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2014-2015 Altera Corporation <www.altera.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/dts-v1/;
+#include "socfpga_arria10_socdk.dtsi"
+
+&mmc {
+	status = "okay";
+	num-slots = <1>;
+	broken-cd;
+	bus-width = <4>;
+};
-- 
2.2.1

[PATCH 5/7] ARM: socfpga: Add support for UART1 debug uart for earlyprintk

[dinguyen]

From: Dinh Nguyen <dinguyen@opensource.altera.com>

Add support for hardware uart1 for earlyprintk support on Arria10 devkit.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
---
 arch/arm/Kconfig.debug | 25 ++++++++++++++++++-------
 1 file changed, 18 insertions(+), 7 deletions(-)

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 970de75..0e52b92 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -920,13 +920,22 @@ choice
 		  on SA-11x0 UART ports. The kernel will check for the first
 		  enabled UART in a sequence 3-1-2.
 
-	config DEBUG_SOCFPGA_UART
+	config DEBUG_SOCFPGA_UART0
 		depends on ARCH_SOCFPGA
-		bool "Use SOCFPGA UART for low-level debug"
+		bool "Use SOCFPGA UART0 for low-level debug"
 		select DEBUG_UART_8250
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  on SOCFPGA based platforms.
+		  on SOCFPGA(Cyclone 5 and Arria 5) based platforms.
+
+	config DEBUG_SOCFPGA_UART1
+		depends on ARCH_SOCFPGA
+		bool "Use SOCFPGA UART1 for low-level debug"
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on SOCFPGA(Arria 10) based platforms.
+
 
 	config DEBUG_SUN9I_UART0
 		bool "Kernel low-level debugging messages via sun9i UART0"
@@ -1419,7 +1428,8 @@ config DEBUG_UART_PHYS
 	default 0xfcb00000 if DEBUG_HI3620_UART
 	default 0xfe800000 if ARCH_IOP32X
 	default 0xff690000 if DEBUG_RK32_UART2
-	default 0xffc02000 if DEBUG_SOCFPGA_UART
+	default 0xffc02000 if DEBUG_SOCFPGA_UART0
+	default 0xffc02100 if DEBUG_SOCFPGA_UART1
 	default 0xffd82340 if ARCH_IOP13XX
 	default 0xffe40000 if DEBUG_RCAR_GEN1_SCIF0
 	default 0xffe42000 if DEBUG_RCAR_GEN1_SCIF2
@@ -1497,7 +1507,8 @@ config DEBUG_UART_VIRT
 	default 0xfeb26000 if DEBUG_RK3X_UART1
 	default 0xfeb30c00 if DEBUG_KEYSTONE_UART0
 	default 0xfeb31000 if DEBUG_KEYSTONE_UART1
-	default 0xfec02000 if DEBUG_SOCFPGA_UART
+	default 0xfec02000 if DEBUG_SOCFPGA_UART0
+	default 0xfec02100 if DEBUG_SOCFPGA_UART1
 	default 0xfec12000 if DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE
 	default 0xfec12100 if DEBUG_MVEBU_UART1_ALTERNATE
 	default 0xfec10000 if DEBUG_SIRFATLAS7_UART0
@@ -1542,8 +1553,8 @@ config DEBUG_UART_8250_WORD
 	bool "Use 32-bit accesses for 8250 UART"
 	depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
 	depends on DEBUG_UART_8250_SHIFT >= 2
-	default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART || \
-		ARCH_KEYSTONE || \
+	default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART0 || \
+		DEBUG_SOCFPGA_UART1 || ARCH_KEYSTONE || \
 		DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \
 		DEBUG_DAVINCI_DA8XX_UART2 || \
 		DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 || \
-- 
2.2.1

[PATCH 6/7] ARM: socfpga: remove the need to map uart_io_desc

[dinguyen]

From: Dinh Nguyen <dinguyen@opensource.altera.com>

All the necessary debug uart mapping is already being done in
debug_ll_io_init, there's no need for it here.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
---
 arch/arm/mach-socfpga/socfpga.c | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c
index f5e597c..358f2c7 100644
--- a/arch/arm/mach-socfpga/socfpga.c
+++ b/arch/arm/mach-socfpga/socfpga.c
@@ -39,13 +39,6 @@ static struct map_desc scu_io_desc __initdata = {
 	.type		= MT_DEVICE,
 };
 
-static struct map_desc uart_io_desc __initdata = {
-	.virtual	= 0xfec02000,
-	.pfn		= __phys_to_pfn(0xffc02000),
-	.length		= SZ_8K,
-	.type		= MT_DEVICE,
-};
-
 static void __init socfpga_scu_map_io(void)
 {
 	unsigned long base;
@@ -60,8 +53,6 @@ static void __init socfpga_scu_map_io(void)
 static void __init socfpga_map_io(void)
 {
 	socfpga_scu_map_io();
-	iotable_init(&uart_io_desc, 1);
-	early_printk("Early printk initialized\n");
 }
 
 void __init socfpga_sysmgr_init(void)
-- 
2.2.1

[PATCH 7/7] Documentation: DT bindings: add doc for Altera's SoCFPGA platform

[dinguyen]

From: Dinh Nguyen <dinguyen@opensource.altera.com>

Document "altr,socfpga-cyclone5", "altr,socfpga-arria5", and
"altr,socfpga-arria10".

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
---
 Documentation/devicetree/bindings/arm/altera.txt | 14 ++++++++++++++
 1 file changed, 14 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/altera.txt

diff --git a/Documentation/devicetree/bindings/arm/altera.txt b/Documentation/devicetree/bindings/arm/altera.txt
new file mode 100644
index 0000000..558735a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/altera.txt
@@ -0,0 +1,14 @@
+Altera's SoCFPGA platform device tree bindings
+---------------------------------------------
+
+Boards with Cyclone 5 SoC:
+Required root node properties:
+compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+
+Boards with Arria 5 SoC:
+Required root node properties:
+compatible = "altr,socfpga-arria5", "altr,socfpga";
+
+Boards with Arria 10 SoC:
+Required root node properties:
+compatible = "altr,socfpga-arria10", "altr,socfpga";
-- 
2.2.1

Re: [PATCH 0/7] ARM: socfpga: Add support for Arria10 devkit

[Pavel Machek]

On Thu 2015-04-02 23:39:51, dinguyen@opensource.altera.com wrote:
> From: Dinh Nguyen <dinguyen@opensource.altera.com>
> 
> Hi,
> 
> This patchset enables and tidy up support for the Arria10 devkit. Along with
> this patchset and the patch for enabling clocks on the Arria10, the devkit
> can boot Linux.

For the whole series:

Acked-by: Pavel Machek <pavel@denx.de>


-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html