From: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
To: lee.jones@linaro.org, broonie@kernel.org,
linus.walleij@linaro.org, gnurou@gmail.com,
cw00.choi@samsung.com
Cc: myungjoo.ham@samsung.com, devicetree@vger.kernel.org,
alsa-devel@alsa-project.org, patches@opensource.wolfsonmicro.com,
linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org,
ckeepax@opensource.wolfsonmicro.com
Subject: [PATCH v3 1/8] mfd: arizona: Split INx_MODE into two fields
Date: Fri, 1 May 2015 16:15:12 +0100 [thread overview]
Message-ID: <1430493319-23808-2-git-send-email-rf@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1430493319-23808-1-git-send-email-rf@opensource.wolfsonmicro.com>
Later arizona silicon has the single/differential selector
in a different register, and IN1_MODE only selects between
analogue or digital. Prepare for this by splitting the
INx_MODE definition into two fields.
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
---
drivers/mfd/arizona-core.c | 8 ++++++--
include/linux/mfd/arizona/pdata.h | 5 ++++-
include/linux/mfd/arizona/registers.h | 27 ++++++++++++++++++---------
3 files changed, 28 insertions(+), 12 deletions(-)
diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
index 6ca6dfa..33fa5b5 100644
--- a/drivers/mfd/arizona-core.c
+++ b/drivers/mfd/arizona-core.c
@@ -977,12 +977,16 @@ int arizona_dev_init(struct arizona *arizona)
/* Default for both is 0 so noop with defaults */
val = arizona->pdata.dmic_ref[i]
<< ARIZONA_IN1_DMIC_SUP_SHIFT;
- val |= arizona->pdata.inmode[i] << ARIZONA_IN1_MODE_SHIFT;
+ if (arizona->pdata.inmode[i] & ARIZONA_INMODE_DMIC)
+ val |= 1 << ARIZONA_IN1_MODE_SHIFT;
+ if (arizona->pdata.inmode[i] & ARIZONA_INMODE_SE)
+ val |= 1 << ARIZONA_IN1_SINGLE_ENDED_SHIFT;
regmap_update_bits(arizona->regmap,
ARIZONA_IN1L_CONTROL + (i * 8),
ARIZONA_IN1_DMIC_SUP_MASK |
- ARIZONA_IN1_MODE_MASK, val);
+ ARIZONA_IN1_MODE_MASK |
+ ARIZONA_IN1_SINGLE_ENDED_MASK, val);
}
for (i = 0; i < ARIZONA_MAX_OUTPUT; i++) {
diff --git a/include/linux/mfd/arizona/pdata.h b/include/linux/mfd/arizona/pdata.h
index 1789cb0..f672267 100644
--- a/include/linux/mfd/arizona/pdata.h
+++ b/include/linux/mfd/arizona/pdata.h
@@ -156,7 +156,10 @@ struct arizona_pdata {
/** MICBIAS configurations */
struct arizona_micbias micbias[ARIZONA_MAX_MICBIAS];
- /** Mode of input structures */
+ /**
+ * Mode of input structures
+ * One of the ARIZONA_INMODE_xxx values
+ */
int inmode[ARIZONA_MAX_INPUT];
/** Mode for outputs */
diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h
index aacc10d..3499d36 100644
--- a/include/linux/mfd/arizona/registers.h
+++ b/include/linux/mfd/arizona/registers.h
@@ -2515,9 +2515,12 @@
#define ARIZONA_IN1_DMIC_SUP_MASK 0x1800 /* IN1_DMIC_SUP - [12:11] */
#define ARIZONA_IN1_DMIC_SUP_SHIFT 11 /* IN1_DMIC_SUP - [12:11] */
#define ARIZONA_IN1_DMIC_SUP_WIDTH 2 /* IN1_DMIC_SUP - [12:11] */
-#define ARIZONA_IN1_MODE_MASK 0x0600 /* IN1_MODE - [10:9] */
-#define ARIZONA_IN1_MODE_SHIFT 9 /* IN1_MODE - [10:9] */
-#define ARIZONA_IN1_MODE_WIDTH 2 /* IN1_MODE - [10:9] */
+#define ARIZONA_IN1_MODE_MASK 0x0400 /* IN1_MODE - [10] */
+#define ARIZONA_IN1_MODE_SHIFT 10 /* IN1_MODE - [10] */
+#define ARIZONA_IN1_MODE_WIDTH 1 /* IN1_MODE - [10] */
+#define ARIZONA_IN1_SINGLE_ENDED_MASK 0x0200 /* IN1_MODE - [9] */
+#define ARIZONA_IN1_SINGLE_ENDED_SHIFT 9 /* IN1_MODE - [9] */
+#define ARIZONA_IN1_SINGLE_ENDED_WIDTH 1 /* IN1_MODE - [9] */
#define ARIZONA_IN1L_PGA_VOL_MASK 0x00FE /* IN1L_PGA_VOL - [7:1] */
#define ARIZONA_IN1L_PGA_VOL_SHIFT 1 /* IN1L_PGA_VOL - [7:1] */
#define ARIZONA_IN1L_PGA_VOL_WIDTH 7 /* IN1L_PGA_VOL - [7:1] */
@@ -2588,9 +2591,12 @@
#define ARIZONA_IN2_DMIC_SUP_MASK 0x1800 /* IN2_DMIC_SUP - [12:11] */
#define ARIZONA_IN2_DMIC_SUP_SHIFT 11 /* IN2_DMIC_SUP - [12:11] */
#define ARIZONA_IN2_DMIC_SUP_WIDTH 2 /* IN2_DMIC_SUP - [12:11] */
-#define ARIZONA_IN2_MODE_MASK 0x0600 /* IN2_MODE - [10:9] */
-#define ARIZONA_IN2_MODE_SHIFT 9 /* IN2_MODE - [10:9] */
-#define ARIZONA_IN2_MODE_WIDTH 2 /* IN2_MODE - [10:9] */
+#define ARIZONA_IN2_MODE_MASK 0x0400 /* IN2_MODE - [10] */
+#define ARIZONA_IN2_MODE_SHIFT 10 /* IN2_MODE - [10] */
+#define ARIZONA_IN2_MODE_WIDTH 1 /* IN2_MODE - [10] */
+#define ARIZONA_IN2_SINGLE_ENDED_MASK 0x0200 /* IN2_MODE - [9] */
+#define ARIZONA_IN2_SINGLE_ENDED_SHIFT 9 /* IN2_MODE - [9] */
+#define ARIZONA_IN2_SINGLE_ENDED_WIDTH 1 /* IN2_MODE - [9] */
#define ARIZONA_IN2L_PGA_VOL_MASK 0x00FE /* IN2L_PGA_VOL - [7:1] */
#define ARIZONA_IN2L_PGA_VOL_SHIFT 1 /* IN2L_PGA_VOL - [7:1] */
#define ARIZONA_IN2L_PGA_VOL_WIDTH 7 /* IN2L_PGA_VOL - [7:1] */
@@ -2661,9 +2667,12 @@
#define ARIZONA_IN3_DMIC_SUP_MASK 0x1800 /* IN3_DMIC_SUP - [12:11] */
#define ARIZONA_IN3_DMIC_SUP_SHIFT 11 /* IN3_DMIC_SUP - [12:11] */
#define ARIZONA_IN3_DMIC_SUP_WIDTH 2 /* IN3_DMIC_SUP - [12:11] */
-#define ARIZONA_IN3_MODE_MASK 0x0600 /* IN3_MODE - [10:9] */
-#define ARIZONA_IN3_MODE_SHIFT 9 /* IN3_MODE - [10:9] */
-#define ARIZONA_IN3_MODE_WIDTH 2 /* IN3_MODE - [10:9] */
+#define ARIZONA_IN3_MODE_MASK 0x0400 /* IN3_MODE - [10] */
+#define ARIZONA_IN3_MODE_SHIFT 10 /* IN3_MODE - [10] */
+#define ARIZONA_IN3_MODE_WIDTH 1 /* IN3_MODE - [10] */
+#define ARIZONA_IN3_SINGLE_ENDED_MASK 0x0200 /* IN3_MODE - [9] */
+#define ARIZONA_IN3_SINGLE_ENDED_SHIFT 9 /* IN3_MODE - [9] */
+#define ARIZONA_IN3_SINGLE_ENDED_WIDTH 1 /* IN3_MODE - [9] */
#define ARIZONA_IN3L_PGA_VOL_MASK 0x00FE /* IN3L_PGA_VOL - [7:1] */
#define ARIZONA_IN3L_PGA_VOL_SHIFT 1 /* IN3L_PGA_VOL - [7:1] */
#define ARIZONA_IN3L_PGA_VOL_WIDTH 7 /* IN3L_PGA_VOL - [7:1] */
--
1.7.2.5
next prev parent reply other threads:[~2015-05-01 15:16 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-01 15:15 [PATCH v3 0/8] Add support for Wolfson WM8998 and WM1814 codecs Richard Fitzgerald
2015-05-01 15:15 ` Richard Fitzgerald [this message]
2015-05-13 12:28 ` [PATCH v3 1/8] mfd: arizona: Split INx_MODE into two fields Lee Jones
2015-05-01 15:15 ` [PATCH v3 2/8] ASoC: arizona: add defines for single-input gain control Richard Fitzgerald
2015-05-01 15:15 ` [PATCH v3 3/8] mfd: arizona: Add support for WM8998 and WM1814 Richard Fitzgerald
2015-05-02 9:58 ` Paul Bolle
2015-05-04 9:11 ` Richard Fitzgerald
2015-05-04 10:44 ` Paul Bolle
2015-05-07 8:52 ` Lee Jones
2015-05-08 9:11 ` Richard Fitzgerald
2015-05-01 15:15 ` [PATCH v3 4/8] gpio: arizona: add " Richard Fitzgerald
2015-05-01 15:15 ` [PATCH v3 5/8] regulator: " Richard Fitzgerald
2015-05-01 15:15 ` [PATCH v3 6/8] extcon: arizona: Add " Richard Fitzgerald
2015-05-01 15:15 ` [PATCH v3 7/8] ASoC: wm8998: Initial WM8998 codec driver Richard Fitzgerald
2015-05-04 11:39 ` Mark Brown
2015-05-05 9:24 ` Richard Fitzgerald
2015-05-05 10:53 ` Mark Brown
2015-05-05 13:31 ` Richard Fitzgerald
2015-05-05 21:59 ` Mark Brown
2015-05-06 9:24 ` Richard Fitzgerald
2015-05-06 11:48 ` Mark Brown
2015-05-06 12:21 ` Richard Fitzgerald
2015-05-06 12:34 ` Mark Brown
2015-05-01 15:15 ` [PATCH v3 8/8] Documentation: Add WM8998/WM1814 device tree bindings Richard Fitzgerald
2015-05-13 12:29 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1430493319-23808-2-git-send-email-rf@opensource.wolfsonmicro.com \
--to=rf@opensource.wolfsonmicro.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=ckeepax@opensource.wolfsonmicro.com \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=gnurou@gmail.com \
--cc=lee.jones@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=myungjoo.ham@samsung.com \
--cc=patches@opensource.wolfsonmicro.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).