linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Roger Quadros <rogerq@ti.com>
To: <tony@atomide.com>
Cc: <dwmw2@infradead.org>, <computersforpeace@gmail.com>,
	<ezequiel@vanguardiasur.com.ar>, <javier@dowhile0.org>,
	<fcooper@ti.com>, <nsekhar@ti.com>,
	<linux-mtd@lists.infradead.org>, <linux-omap@vger.kernel.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	Roger Quadros <rogerq@ti.com>
Subject: [PATCH v3 00/27] memory: omap-gpmc: mtd: nand: Support GPMC NAND on non-OMAP platforms
Date: Fri, 18 Sep 2015 17:53:22 +0300	[thread overview]
Message-ID: <1442588029-13769-1-git-send-email-rogerq@ti.com> (raw)

Hi,

We do a couple of things in this series which result in
cleaner device tree implementation, faster perfomance and
multi-platform support. As an added bonus we get new GPI/Interrupt pins
for use in the system.

- Establish a custom interface between NAND and GPMC driver. This is
needed because all of the NAND registers sit in the GPMC register space.
Some bits like NAND IRQ are even shared with GPMC.

- Remove NAND IRQ handling from omap-gpmc driver, share the GPMC IRQ
with the omap2-nand driver and handle NAND IRQ events in the NAND driver.
This causes performance increase when using prefetch-irq mode.
30% increase in read, 17% increase in write in prefetch-irq mode.

- Clean up device tree support so that omap-gpmc IP and the omap2 NAND
driver can be used on non-OMAP platforms. e.g. Keystone.

- Implement GPIOCHIP + IRQCHIP for the GPMC WAITPINS. SoCs can contain
2 to 4 of these and most of them would be unused otherwise. It also
allows a cleaner implementation of NAND Ready pin status for the NAND driver.

- Implement GPIOlib based NAND ready pin checking for OMAP NAND driver.

This series is available at
git@github.com:rogerq/linux.git
in branch
for-v4.4/gpmc-v3

cheers,
-roger

Changelog:
v3:
-Fixed and tested NAND using legacy boot on omap3-beagle.
-Support rising and falling edge interrupts on WAITpins.
-Update DT node of all gpmc users.

Roger Quadros (27):
  ARM: OMAP2+: gpmc: Add platform data
  ARM: OMAP2+: gpmc: Add gpmc timings and settings to platform data
  memory: omap-gpmc: Introduce GPMC to NAND interface
  mtd: nand: omap2: Use gpmc_omap_get_nand_ops() to get NAND registers
  memory: omap-gpmc: Add GPMC-NAND ops to get writebufferempty status
  mtd: nand: omap2: Switch to using GPMC-NAND ops for writebuffer empty
    check
  memory: omap-gpmc: Remove NAND IRQ code
  memory: omap-gpmc: Add IRQ ops for GPMC-NAND interface
  mtd: nand: omap2: manage NAND interrupts
  mtd: nand: omap: Copy platform data parameters to omap_nand_info data
  mtd: nand: omap: Clean up device tree support
  mtd: nand: omap: Update DT binding documentation
  memory: omap-gpmc: Prevent mapping into 1st 16MB
  memory: omap-gpmc: Move device tree binding to correct location
  memory: omap-gpmc: Support general purpose input for WAITPINs
  memory: omap-gpmc: Reserve WAITPIN if needed for WAIT monitoring
  memory: omap-gpmc: Add irqchip support to the gpiochip
  mtd: nand: omap2: Implement NAND ready using gpiolib
  memory: omap-gpmc: Prevent GPMC_STATUS from being accessed via
    gpmc_regs
  ARM: dts: dra7: Fix NAND device nodes.
  ARM: dts: dra7x-evm: Provide NAND ready pin
  ARM: dts: am437x: Fix NAND device nodes
  ARM: dts: am437x-gp-evm: Provide NAND ready pin
  ARM: dts: am335x: Fix NAND device nodes
  ARM: dts: am335x: Provide NAND ready pin
  ARM: dts: dm816x: Fix gpmc and NAND node
  ARM: dts: omap3: Fix gpmc and NAND nodes

 Documentation/devicetree/bindings/bus/ti-gpmc.txt  | 130 -----
 .../bindings/memory-controllers/omap-gpmc.txt      | 130 +++++
 .../devicetree/bindings/mtd/gpmc-nand.txt          |  16 +-
 arch/arm/boot/dts/am335x-chilisom.dtsi             |   7 +-
 arch/arm/boot/dts/am335x-evm.dts                   |   7 +-
 arch/arm/boot/dts/am335x-igep0033.dtsi             |   7 +-
 arch/arm/boot/dts/am33xx.dtsi                      |   4 +
 arch/arm/boot/dts/am4372.dtsi                      |   4 +
 arch/arm/boot/dts/am437x-gp-evm.dts                |   8 +-
 arch/arm/boot/dts/am43x-epos-evm.dts               |   8 +-
 arch/arm/boot/dts/dm8168-evm.dts                   |   7 +-
 arch/arm/boot/dts/dm816x.dtsi                      |   4 +
 arch/arm/boot/dts/dra7-evm.dts                     |   6 +-
 arch/arm/boot/dts/dra7.dtsi                        |   4 +
 arch/arm/boot/dts/dra72-evm.dts                    |   6 +-
 arch/arm/boot/dts/logicpd-torpedo-som.dtsi         |   7 +-
 arch/arm/boot/dts/omap3-beagle.dts                 |   2 +
 arch/arm/boot/dts/omap3-cm-t3x.dtsi                |   5 +-
 arch/arm/boot/dts/omap3-devkit8000-common.dtsi     |   3 +
 arch/arm/boot/dts/omap3-evm-37xx.dts               |   7 +-
 arch/arm/boot/dts/omap3-gta04.dtsi                 |   3 +
 arch/arm/boot/dts/omap3-igep.dtsi                  |   5 +-
 arch/arm/boot/dts/omap3-igep0020-common.dtsi       |   4 +-
 arch/arm/boot/dts/omap3-igep0030-common.dtsi       |   4 +
 arch/arm/boot/dts/omap3-ldp.dts                    |   9 +-
 arch/arm/boot/dts/omap3-lilly-a83x.dtsi            |   5 +-
 arch/arm/boot/dts/omap3-pandora-common.dtsi        |   3 +
 arch/arm/boot/dts/omap3-tao3530.dtsi               |   5 +-
 arch/arm/boot/dts/omap3.dtsi                       |   4 +
 arch/arm/boot/dts/omap3430-sdp.dts                 |   5 +-
 arch/arm/mach-omap2/gpmc-nand.c                    |  11 +-
 drivers/memory/omap-gpmc.c                         | 640 ++++++++++++---------
 drivers/mtd/nand/omap2.c                           | 261 ++++++---
 include/linux/omap-gpmc.h                          | 183 ++----
 include/linux/platform_data/gpmc-omap.h            | 167 ++++++
 include/linux/platform_data/mtd-nand-omap2.h       |  12 +-
 36 files changed, 1045 insertions(+), 648 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/bus/ti-gpmc.txt
 create mode 100644 Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
 create mode 100644 include/linux/platform_data/gpmc-omap.h

-- 
2.1.4


             reply	other threads:[~2015-09-18 14:55 UTC|newest]

Thread overview: 79+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-09-18 14:53 Roger Quadros [this message]
2015-09-18 14:53 ` [PATCH v3 01/27] ARM: OMAP2+: gpmc: Add platform data Roger Quadros
2015-09-18 14:53 ` [PATCH v3 02/27] ARM: OMAP2+: gpmc: Add gpmc timings and settings to " Roger Quadros
2015-09-18 14:53 ` [PATCH v3 03/27] memory: omap-gpmc: Introduce GPMC to NAND interface Roger Quadros
2015-09-18 14:53 ` [PATCH v3 04/27] mtd: nand: omap2: Use gpmc_omap_get_nand_ops() to get NAND registers Roger Quadros
2015-12-03  5:00   ` Brian Norris
2015-09-18 14:53 ` [PATCH v3 05/27] memory: omap-gpmc: Add GPMC-NAND ops to get writebufferempty status Roger Quadros
2015-09-18 14:53 ` [PATCH v3 06/27] mtd: nand: omap2: Switch to using GPMC-NAND ops for writebuffer empty check Roger Quadros
2015-09-18 14:53 ` [PATCH v3 07/27] memory: omap-gpmc: Remove NAND IRQ code Roger Quadros
2015-09-18 14:53 ` [PATCH v3 08/27] memory: omap-gpmc: Add IRQ ops for GPMC-NAND interface Roger Quadros
2015-09-18 14:53 ` [PATCH v3 09/27] mtd: nand: omap2: manage NAND interrupts Roger Quadros
2015-09-18 14:53 ` [PATCH v3 10/27] mtd: nand: omap: Copy platform data parameters to omap_nand_info data Roger Quadros
2015-09-18 14:53 ` [PATCH v3 11/27] mtd: nand: omap: Clean up device tree support Roger Quadros
2015-10-06 10:35   ` [PATCH v4 " Roger Quadros
2015-12-03  4:29     ` Brian Norris
2015-12-03  5:57       ` Roger Quadros
2015-12-03  6:09         ` Brian Norris
2015-09-18 14:53 ` [PATCH v3 12/27] mtd: nand: omap: Update DT binding documentation Roger Quadros
2015-09-18 14:53 ` [PATCH v3 13/27] memory: omap-gpmc: Prevent mapping into 1st 16MB Roger Quadros
2015-09-18 14:53 ` [PATCH v3 14/27] memory: omap-gpmc: Move device tree binding to correct location Roger Quadros
2015-09-18 14:53 ` [PATCH v3 15/27] memory: omap-gpmc: Support general purpose input for WAITPINs Roger Quadros
2015-09-18 14:53 ` [PATCH v3 16/27] memory: omap-gpmc: Reserve WAITPIN if needed for WAIT monitoring Roger Quadros
2015-09-18 14:53 ` [PATCH v3 17/27] memory: omap-gpmc: Add irqchip support to the gpiochip Roger Quadros
2015-09-18 14:53 ` [PATCH v3 18/27] mtd: nand: omap2: Implement NAND ready using gpiolib Roger Quadros
2015-10-26 20:49   ` Brian Norris
2015-10-27  8:03     ` Roger Quadros
2015-10-27  8:12       ` Boris Brezillon
2015-10-27  8:43         ` Roger Quadros
2015-10-27  8:28     ` Boris Brezillon
2015-12-03  4:45       ` Brian Norris
2015-12-03  8:41         ` Boris Brezillon
2015-09-18 14:53 ` [PATCH v3 19/27] memory: omap-gpmc: Prevent GPMC_STATUS from being accessed via gpmc_regs Roger Quadros
2015-09-18 14:53 ` [PATCH v3 20/27] ARM: dts: dra7: Fix NAND device nodes Roger Quadros
2015-10-14 13:34   ` Franklin S Cooper Jr.
2015-10-14 14:17     ` Roger Quadros
2015-10-14 14:37       ` Franklin S Cooper Jr.
2015-09-18 14:53 ` [PATCH v3 21/27] ARM: dts: dra7x-evm: Provide NAND ready pin Roger Quadros
2015-09-18 14:53 ` [PATCH v3 22/27] ARM: dts: am437x: Fix NAND device nodes Roger Quadros
2015-09-18 14:53 ` [PATCH v3 23/27] ARM: dts: am437x-gp-evm: Provide NAND ready pin Roger Quadros
2015-09-18 14:53 ` [PATCH v3 24/27] ARM: dts: am335x: Fix NAND device nodes Roger Quadros
2015-09-18 14:53 ` [PATCH v3 25/27] ARM: dts: am335x: Provide NAND ready pin Roger Quadros
2015-09-18 14:53 ` [PATCH v3 26/27] ARM: dts: dm816x: Fix gpmc and NAND node Roger Quadros
2015-09-18 14:53 ` [PATCH v3 27/27] ARM: dts: omap3: Fix gpmc and NAND nodes Roger Quadros
2015-10-13  0:43   ` Tony Lindgren
2015-10-13  6:29     ` Roger Quadros
2015-10-13 15:18       ` Tony Lindgren
2015-10-14  7:39         ` Roger Quadros
2015-10-14  8:55   ` [PATCH v4 " Roger Quadros
2015-09-30  7:39 ` [PATCH v3 00/27] memory: omap-gpmc: mtd: nand: Support GPMC NAND on non-OMAP platforms Roger Quadros
2015-09-30 11:00 ` Roger Quadros
2015-10-06  8:33   ` Tony Lindgren
2015-10-06  9:54     ` Roger Quadros
2015-10-06 10:00       ` Tony Lindgren
2015-10-06 10:05         ` Roger Quadros
2015-10-06 10:28           ` Roger Quadros
2015-10-06 11:01             ` Tony Lindgren
2015-10-06 11:09               ` Roger Quadros
2015-10-16 21:25                 ` Tony Lindgren
2015-10-19  7:08                   ` Roger Quadros
2015-10-21  8:31                     ` Roger Quadros
2015-10-21 15:20                       ` Tony Lindgren
2015-10-23  7:09                         ` Roger Quadros
2015-11-30 17:26                           ` Tony Lindgren
2015-10-26 21:23 ` Brian Norris
2015-10-27  9:37   ` Roger Quadros
2015-11-25 10:42     ` Roger Quadros
2015-11-30 19:54     ` Brian Norris
2015-12-01 14:41       ` Roger Quadros
2015-12-02  3:26         ` Brian Norris
2015-12-02  5:12           ` Roger Quadros
2015-12-02 15:03             ` Tony Lindgren
2015-12-02 18:13               ` Brian Norris
2015-12-02 20:05                 ` Tony Lindgren
2015-12-02 18:43             ` Brian Norris
2015-12-03  5:09 ` Brian Norris
2015-12-03  6:08   ` Roger Quadros
2015-12-03  6:22     ` Brian Norris
2015-12-03  9:01       ` Roger Quadros
2015-12-03 15:17         ` Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1442588029-13769-1-git-send-email-rogerq@ti.com \
    --to=rogerq@ti.com \
    --cc=computersforpeace@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dwmw2@infradead.org \
    --cc=ezequiel@vanguardiasur.com.ar \
    --cc=fcooper@ti.com \
    --cc=javier@dowhile0.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=nsekhar@ti.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).