From: Roger Quadros <rogerq@ti.com>
To: <tony@atomide.com>
Cc: <dwmw2@infradead.org>, <computersforpeace@gmail.com>,
<ezequiel@vanguardiasur.com.ar>, <javier@dowhile0.org>,
<fcooper@ti.com>, <nsekhar@ti.com>,
<linux-mtd@lists.infradead.org>, <linux-omap@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Roger Quadros <rogerq@ti.com>
Subject: [PATCH v3 09/27] mtd: nand: omap2: manage NAND interrupts
Date: Fri, 18 Sep 2015 17:53:31 +0300 [thread overview]
Message-ID: <1442588029-13769-10-git-send-email-rogerq@ti.com> (raw)
In-Reply-To: <1442588029-13769-1-git-send-email-rogerq@ti.com>
Manage NAND interrupts here using the GPMC IRQ ops.
This causes performance in prefetch-irq mode to be increased
from
[ 38.252811] mtd_speedtest: eraseblock write speed is 5576 KiB/s
[ 39.265259] mtd_speedtest: eraseblock read speed is 8192 KiB/s
to
[ 35.666446] mtd_speedtest: eraseblock write speed is 6537 KiB/s
[ 36.444842] mtd_speedtest: eraseblock read speed is 10680 KiB/s
Test results on dra7-evm using mtd_speedtest.ko
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
drivers/mtd/nand/omap2.c | 65 +++++++++++++++++++++++-------------------------
1 file changed, 31 insertions(+), 34 deletions(-)
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 0eb0b8c..267bcdd 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -162,8 +162,7 @@ struct omap_nand_info {
enum omap_ecc ecc_opt;
struct completion comp;
struct dma_chan *dma;
- int gpmc_irq_fifo;
- int gpmc_irq_count;
+ int gpmc_irq;
enum {
OMAP_NAND_IO_READ = 0, /* read */
OMAP_NAND_IO_WRITE, /* write */
@@ -579,12 +578,17 @@ static irqreturn_t omap_nand_irq(int this_irq, void *dev)
{
struct omap_nand_info *info = (struct omap_nand_info *) dev;
u32 bytes;
+ u32 irqstatus;
+
+ irqstatus = info->ops->nand_irq_status();
+ if (!irqstatus)
+ return IRQ_NONE;
bytes = readl(info->reg.gpmc_prefetch_status);
bytes = PREFETCH_STATUS_FIFO_CNT(bytes);
bytes = bytes & 0xFFFC; /* io in multiple of 4 bytes */
if (info->iomode == OMAP_NAND_IO_WRITE) { /* checks for write io */
- if (this_irq == info->gpmc_irq_count)
+ if (irqstatus & GPMC_IRQENABLE_TERMCOUNT)
goto done;
if (info->buf_len && (info->buf_len < bytes))
@@ -601,17 +605,25 @@ static irqreturn_t omap_nand_irq(int this_irq, void *dev)
(u32 *)info->buf, bytes >> 2);
info->buf = info->buf + bytes;
- if (this_irq == info->gpmc_irq_count)
+ if (irqstatus & GPMC_IRQENABLE_TERMCOUNT)
goto done;
}
+ /* Clear FIFOEVENT STATUS */
+ info->ops->nand_irq_clear(GPMC_NAND_IRQ_FIFOEVENT);
+
return IRQ_HANDLED;
done:
complete(&info->comp);
- disable_irq_nosync(info->gpmc_irq_fifo);
- disable_irq_nosync(info->gpmc_irq_count);
+ /* Clear FIFOEVENT and TERMCOUNT STATUS */
+ info->ops->nand_irq_clear(GPMC_NAND_IRQ_FIFOEVENT);
+ info->ops->nand_irq_clear(GPMC_NAND_IRQ_TERMCOUNT);
+
+ /* Disable Interrupt generation */
+ info->ops->nand_irq_disable(GPMC_NAND_IRQ_FIFOEVENT);
+ info->ops->nand_irq_disable(GPMC_NAND_IRQ_TERMCOUNT);
return IRQ_HANDLED;
}
@@ -646,8 +658,9 @@ static void omap_read_buf_irq_pref(struct mtd_info *mtd, u_char *buf, int len)
info->buf_len = len;
- enable_irq(info->gpmc_irq_count);
- enable_irq(info->gpmc_irq_fifo);
+ /* Enable Interrupt generation */
+ info->ops->nand_irq_enable(GPMC_NAND_IRQ_TERMCOUNT);
+ info->ops->nand_irq_enable(GPMC_NAND_IRQ_FIFOEVENT);
/* waiting for read to complete */
wait_for_completion(&info->comp);
@@ -696,8 +709,9 @@ static void omap_write_buf_irq_pref(struct mtd_info *mtd,
info->buf_len = len;
- enable_irq(info->gpmc_irq_count);
- enable_irq(info->gpmc_irq_fifo);
+ /* Enable Interrupt generation */
+ info->ops->nand_irq_enable(GPMC_NAND_IRQ_TERMCOUNT);
+ info->ops->nand_irq_enable(GPMC_NAND_IRQ_FIFOEVENT);
/* waiting for write to complete */
wait_for_completion(&info->comp);
@@ -1776,35 +1790,18 @@ static int omap_nand_probe(struct platform_device *pdev)
break;
case NAND_OMAP_PREFETCH_IRQ:
- info->gpmc_irq_fifo = platform_get_irq(pdev, 0);
- if (info->gpmc_irq_fifo <= 0) {
- dev_err(&pdev->dev, "error getting fifo irq\n");
- err = -ENODEV;
- goto return_error;
- }
- err = devm_request_irq(&pdev->dev, info->gpmc_irq_fifo,
- omap_nand_irq, IRQF_SHARED,
- "gpmc-nand-fifo", info);
- if (err) {
- dev_err(&pdev->dev, "requesting irq(%d) error:%d",
- info->gpmc_irq_fifo, err);
- info->gpmc_irq_fifo = 0;
- goto return_error;
- }
-
- info->gpmc_irq_count = platform_get_irq(pdev, 1);
- if (info->gpmc_irq_count <= 0) {
- dev_err(&pdev->dev, "error getting count irq\n");
+ info->gpmc_irq = platform_get_irq(pdev, 0);
+ if (info->gpmc_irq <= 0) {
+ dev_err(&pdev->dev, "error getting GPMC irq\n");
err = -ENODEV;
goto return_error;
}
- err = devm_request_irq(&pdev->dev, info->gpmc_irq_count,
- omap_nand_irq, IRQF_SHARED,
- "gpmc-nand-count", info);
+ err = devm_request_irq(&pdev->dev, info->gpmc_irq,
+ omap_nand_irq, IRQF_SHARED,
+ DRIVER_NAME, info);
if (err) {
dev_err(&pdev->dev, "requesting irq(%d) error:%d",
- info->gpmc_irq_count, err);
- info->gpmc_irq_count = 0;
+ info->gpmc_irq, err);
goto return_error;
}
--
2.1.4
next prev parent reply other threads:[~2015-09-18 15:18 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-18 14:53 [PATCH v3 00/27] memory: omap-gpmc: mtd: nand: Support GPMC NAND on non-OMAP platforms Roger Quadros
2015-09-18 14:53 ` [PATCH v3 01/27] ARM: OMAP2+: gpmc: Add platform data Roger Quadros
2015-09-18 14:53 ` [PATCH v3 02/27] ARM: OMAP2+: gpmc: Add gpmc timings and settings to " Roger Quadros
2015-09-18 14:53 ` [PATCH v3 03/27] memory: omap-gpmc: Introduce GPMC to NAND interface Roger Quadros
2015-09-18 14:53 ` [PATCH v3 04/27] mtd: nand: omap2: Use gpmc_omap_get_nand_ops() to get NAND registers Roger Quadros
2015-12-03 5:00 ` Brian Norris
2015-09-18 14:53 ` [PATCH v3 05/27] memory: omap-gpmc: Add GPMC-NAND ops to get writebufferempty status Roger Quadros
2015-09-18 14:53 ` [PATCH v3 06/27] mtd: nand: omap2: Switch to using GPMC-NAND ops for writebuffer empty check Roger Quadros
2015-09-18 14:53 ` [PATCH v3 07/27] memory: omap-gpmc: Remove NAND IRQ code Roger Quadros
2015-09-18 14:53 ` [PATCH v3 08/27] memory: omap-gpmc: Add IRQ ops for GPMC-NAND interface Roger Quadros
2015-09-18 14:53 ` Roger Quadros [this message]
2015-09-18 14:53 ` [PATCH v3 10/27] mtd: nand: omap: Copy platform data parameters to omap_nand_info data Roger Quadros
2015-09-18 14:53 ` [PATCH v3 11/27] mtd: nand: omap: Clean up device tree support Roger Quadros
2015-10-06 10:35 ` [PATCH v4 " Roger Quadros
2015-12-03 4:29 ` Brian Norris
2015-12-03 5:57 ` Roger Quadros
2015-12-03 6:09 ` Brian Norris
2015-09-18 14:53 ` [PATCH v3 12/27] mtd: nand: omap: Update DT binding documentation Roger Quadros
2015-09-18 14:53 ` [PATCH v3 13/27] memory: omap-gpmc: Prevent mapping into 1st 16MB Roger Quadros
2015-09-18 14:53 ` [PATCH v3 14/27] memory: omap-gpmc: Move device tree binding to correct location Roger Quadros
2015-09-18 14:53 ` [PATCH v3 15/27] memory: omap-gpmc: Support general purpose input for WAITPINs Roger Quadros
2015-09-18 14:53 ` [PATCH v3 16/27] memory: omap-gpmc: Reserve WAITPIN if needed for WAIT monitoring Roger Quadros
2015-09-18 14:53 ` [PATCH v3 17/27] memory: omap-gpmc: Add irqchip support to the gpiochip Roger Quadros
2015-09-18 14:53 ` [PATCH v3 18/27] mtd: nand: omap2: Implement NAND ready using gpiolib Roger Quadros
2015-10-26 20:49 ` Brian Norris
2015-10-27 8:03 ` Roger Quadros
2015-10-27 8:12 ` Boris Brezillon
2015-10-27 8:43 ` Roger Quadros
2015-10-27 8:28 ` Boris Brezillon
2015-12-03 4:45 ` Brian Norris
2015-12-03 8:41 ` Boris Brezillon
2015-09-18 14:53 ` [PATCH v3 19/27] memory: omap-gpmc: Prevent GPMC_STATUS from being accessed via gpmc_regs Roger Quadros
2015-09-18 14:53 ` [PATCH v3 20/27] ARM: dts: dra7: Fix NAND device nodes Roger Quadros
2015-10-14 13:34 ` Franklin S Cooper Jr.
2015-10-14 14:17 ` Roger Quadros
2015-10-14 14:37 ` Franklin S Cooper Jr.
2015-09-18 14:53 ` [PATCH v3 21/27] ARM: dts: dra7x-evm: Provide NAND ready pin Roger Quadros
2015-09-18 14:53 ` [PATCH v3 22/27] ARM: dts: am437x: Fix NAND device nodes Roger Quadros
2015-09-18 14:53 ` [PATCH v3 23/27] ARM: dts: am437x-gp-evm: Provide NAND ready pin Roger Quadros
2015-09-18 14:53 ` [PATCH v3 24/27] ARM: dts: am335x: Fix NAND device nodes Roger Quadros
2015-09-18 14:53 ` [PATCH v3 25/27] ARM: dts: am335x: Provide NAND ready pin Roger Quadros
2015-09-18 14:53 ` [PATCH v3 26/27] ARM: dts: dm816x: Fix gpmc and NAND node Roger Quadros
2015-09-18 14:53 ` [PATCH v3 27/27] ARM: dts: omap3: Fix gpmc and NAND nodes Roger Quadros
2015-10-13 0:43 ` Tony Lindgren
2015-10-13 6:29 ` Roger Quadros
2015-10-13 15:18 ` Tony Lindgren
2015-10-14 7:39 ` Roger Quadros
2015-10-14 8:55 ` [PATCH v4 " Roger Quadros
2015-09-30 7:39 ` [PATCH v3 00/27] memory: omap-gpmc: mtd: nand: Support GPMC NAND on non-OMAP platforms Roger Quadros
2015-09-30 11:00 ` Roger Quadros
2015-10-06 8:33 ` Tony Lindgren
2015-10-06 9:54 ` Roger Quadros
2015-10-06 10:00 ` Tony Lindgren
2015-10-06 10:05 ` Roger Quadros
2015-10-06 10:28 ` Roger Quadros
2015-10-06 11:01 ` Tony Lindgren
2015-10-06 11:09 ` Roger Quadros
2015-10-16 21:25 ` Tony Lindgren
2015-10-19 7:08 ` Roger Quadros
2015-10-21 8:31 ` Roger Quadros
2015-10-21 15:20 ` Tony Lindgren
2015-10-23 7:09 ` Roger Quadros
2015-11-30 17:26 ` Tony Lindgren
2015-10-26 21:23 ` Brian Norris
2015-10-27 9:37 ` Roger Quadros
2015-11-25 10:42 ` Roger Quadros
2015-11-30 19:54 ` Brian Norris
2015-12-01 14:41 ` Roger Quadros
2015-12-02 3:26 ` Brian Norris
2015-12-02 5:12 ` Roger Quadros
2015-12-02 15:03 ` Tony Lindgren
2015-12-02 18:13 ` Brian Norris
2015-12-02 20:05 ` Tony Lindgren
2015-12-02 18:43 ` Brian Norris
2015-12-03 5:09 ` Brian Norris
2015-12-03 6:08 ` Roger Quadros
2015-12-03 6:22 ` Brian Norris
2015-12-03 9:01 ` Roger Quadros
2015-12-03 15:17 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1442588029-13769-10-git-send-email-rogerq@ti.com \
--to=rogerq@ti.com \
--cc=computersforpeace@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dwmw2@infradead.org \
--cc=ezequiel@vanguardiasur.com.ar \
--cc=fcooper@ti.com \
--cc=javier@dowhile0.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=nsekhar@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).