From: Roger Quadros <rogerq@ti.com>
To: <tony@atomide.com>
Cc: <dwmw2@infradead.org>, <computersforpeace@gmail.com>,
<ezequiel@vanguardiasur.com.ar>, <javier@dowhile0.org>,
<fcooper@ti.com>, <nsekhar@ti.com>,
<linux-mtd@lists.infradead.org>, <linux-omap@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Roger Quadros <rogerq@ti.com>
Subject: [PATCH v3 27/27] ARM: dts: omap3: Fix gpmc and NAND nodes
Date: Fri, 18 Sep 2015 17:53:49 +0300 [thread overview]
Message-ID: <1442588029-13769-28-git-send-email-rogerq@ti.com> (raw)
In-Reply-To: <1442588029-13769-1-git-send-email-rogerq@ti.com>
Add compatible id, GPMC register resource and interrupt
resource to NAND controller nodes.
The GPMC driver now implements gpiochip and irqchip so
enable gpio-controller and interrupt-controller properties.
With this the interrupt parent of NAND node changes so fix it
accordingly.
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
arch/arm/boot/dts/logicpd-torpedo-som.dtsi | 7 +++++--
arch/arm/boot/dts/omap3-beagle.dts | 2 ++
arch/arm/boot/dts/omap3-cm-t3x.dtsi | 5 ++++-
arch/arm/boot/dts/omap3-devkit8000-common.dtsi | 3 +++
arch/arm/boot/dts/omap3-evm-37xx.dts | 7 +++++--
arch/arm/boot/dts/omap3-gta04.dtsi | 3 +++
arch/arm/boot/dts/omap3-igep.dtsi | 5 ++++-
arch/arm/boot/dts/omap3-igep0020-common.dtsi | 4 ++--
arch/arm/boot/dts/omap3-igep0030-common.dtsi | 4 ++++
arch/arm/boot/dts/omap3-ldp.dts | 9 ++++++---
arch/arm/boot/dts/omap3-lilly-a83x.dtsi | 5 ++++-
arch/arm/boot/dts/omap3-pandora-common.dtsi | 3 +++
arch/arm/boot/dts/omap3-tao3530.dtsi | 5 ++++-
arch/arm/boot/dts/omap3.dtsi | 4 ++++
arch/arm/boot/dts/omap3430-sdp.dts | 5 ++++-
15 files changed, 57 insertions(+), 14 deletions(-)
diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
index 36387b1..4ba73c9 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
+++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
@@ -35,11 +35,14 @@
};
&gpmc {
- ranges = <0 0 0x00000000 0x1000000>; /* CS0: 16MB for NAND */
+ ranges = <0 0 0x08000000 0x1000000>; /* CS0: 16MB for NAND */
nand@0,0 {
- linux,mtd-name = "micron,mt29f4g16abbda3w";
+ compatible = "ti,omap2-nand";
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&intc>;
+ interrupts = <20>;
+ linux,mtd-name = "micron,mt29f4g16abbda3w";
nand-bus-width = <16>;
ti,nand-ecc-opt = "bch8";
gpmc,sync-clk-ps = <0>;
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index a547411..bb4df5d 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -384,7 +384,9 @@
/* Chip select 0 */
nand@0,0 {
+ compatible = "ti,omap2-nand";
reg = <0 0 4>; /* NAND I/O window, 4 bytes */
+ interrupt-parent = <&intc>;
interrupts = <20>;
ti,nand-ecc-opt = "ham1";
nand-bus-width = <16>;
diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
index 4d091ca..e9d7e28 100644
--- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi
+++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
@@ -261,10 +261,13 @@
};
&gpmc {
- ranges = <0 0 0x00000000 0x01000000>;
+ ranges = <0 0 0x30000000 0x01000000>; /* CS0: 16MB for NAND */
nand@0,0 {
+ compatible = "ti,omap2-nand";
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&intc>;
+ interrupts = <20>;
nand-bus-width = <8>;
gpmc,device-width = <1>;
ti,nand-ecc-opt = "sw";
diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
index 9ca2865..e7b46ad 100644
--- a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
+++ b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
@@ -204,7 +204,10 @@
ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
nand@0,0 {
+ compatible = "ti,omap2-nand";
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&intc>;
+ interrupts = <20>;
nand-bus-width = <16>;
gpmc,device-width = <2>;
ti,nand-ecc-opt = "sw";
diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts
index 16e8ce3..7081e07 100644
--- a/arch/arm/boot/dts/omap3-evm-37xx.dts
+++ b/arch/arm/boot/dts/omap3-evm-37xx.dts
@@ -154,12 +154,15 @@
};
&gpmc {
- ranges = <0 0 0x00000000 0x1000000>, /* CS0: 16MB for NAND */
+ ranges = <0 0 0x30000000 0x1000000>, /* CS0: 16MB for NAND */
<5 0 0x2c000000 0x01000000>;
nand@0,0 {
+ compatible = "ti,omap2-nand";
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&intc>;
+ interrupts = <20>;
linux,mtd-name= "hynix,h8kds0un0mer-4em";
- reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
nand-bus-width = <16>;
gpmc,device-width = <2>;
ti,nand-ecc-opt = "bch8";
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index 7166d88..4c48b31 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -492,7 +492,10 @@
ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
nand@0,0 {
+ compatible = "ti,omap2-nand";
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&intc>;
+ interrupts = <20>;
nand-bus-width = <16>;
ti,nand-ecc-opt = "bch8";
diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi
index d5e5cd4..1324f51 100644
--- a/arch/arm/boot/dts/omap3-igep.dtsi
+++ b/arch/arm/boot/dts/omap3-igep.dtsi
@@ -101,8 +101,11 @@
&gpmc {
nand@0,0 {
+ compatible = "ti,omap2-nand";
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&intc>;
+ interrupts = <20>;
linux,mtd-name= "micron,mt29c4g96maz";
- reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
nand-bus-width = <16>;
gpmc,device-width = <2>;
ti,nand-ecc-opt = "bch8";
diff --git a/arch/arm/boot/dts/omap3-igep0020-common.dtsi b/arch/arm/boot/dts/omap3-igep0020-common.dtsi
index e458c21..8b7b7c7 100644
--- a/arch/arm/boot/dts/omap3-igep0020-common.dtsi
+++ b/arch/arm/boot/dts/omap3-igep0020-common.dtsi
@@ -204,8 +204,8 @@
};
&gpmc {
- ranges = <0 0 0x00000000 0x20000000>,
- <5 0 0x2c000000 0x01000000>;
+ ranges = <0 0 0x30000000 0x01000000>, /* CS0: 16MB for NAND */
+ <5 0 0x2c000000 0x01000000>; /* CS5: 16MB for ethernet */
ethernet@gpmc {
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/omap3-igep0030-common.dtsi b/arch/arm/boot/dts/omap3-igep0030-common.dtsi
index 0cb1527..c5d8210 100644
--- a/arch/arm/boot/dts/omap3-igep0030-common.dtsi
+++ b/arch/arm/boot/dts/omap3-igep0030-common.dtsi
@@ -58,3 +58,7 @@
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
};
+
+&gpmc {
+ ranges = <0 0 0x30000000 0x01000000>; /* CS0: 16MB for NAND */
+};
diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts
index bd6e676..fb86131 100644
--- a/arch/arm/boot/dts/omap3-ldp.dts
+++ b/arch/arm/boot/dts/omap3-ldp.dts
@@ -97,12 +97,15 @@
};
&gpmc {
- ranges = <0 0 0x00000000 0x01000000>,
- <1 0 0x08000000 0x01000000>;
+ ranges = <0 0 0x30000000 0x1000000>, /* CS0 space, 16MB */
+ <1 0 0x08000000 0x1000000>; /* CS1 space, 16MB */
nand@0,0 {
+ compatible = "ti,omap2-nand";
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&intc>;
+ interrupts = <20>;
linux,mtd-name= "micron,nand";
- reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
nand-bus-width = <16>;
gpmc,device-width = <2>;
ti,nand-ecc-opt = "bch8";
diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
index d0dd036..abc39f4 100644
--- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
+++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
@@ -362,7 +362,10 @@
<7 0 0x15000000 0x01000000>;
nand@0,0 {
- reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ compatible = "ti,omap2-nand";
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&intc>;
+ interrupts = <20>;
nand-bus-width = <16>;
ti,nand-ecc-opt = "bch8";
/* no elm on omap3 */
diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi
index f2084e6..11ada97 100644
--- a/arch/arm/boot/dts/omap3-pandora-common.dtsi
+++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi
@@ -546,7 +546,10 @@
ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
nand@0,0 {
+ compatible = "ti,omap2-nand";
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&intc>;
+ interrupts = <20>;
nand-bus-width = <16>;
ti,nand-ecc-opt = "sw";
diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi
index 7bd8d9a..838e0da 100644
--- a/arch/arm/boot/dts/omap3-tao3530.dtsi
+++ b/arch/arm/boot/dts/omap3-tao3530.dtsi
@@ -275,10 +275,13 @@
};
&gpmc {
- ranges = <0 0 0x00000000 0x01000000>;
+ ranges = <0 0 0x30000000 0x01000000>; /* CS0: 16MB for NAND */
nand@0,0 {
+ compatible = "ti,omap2-nand";
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&intc>;
+ interrupts = <20>;
nand-bus-width = <16>;
gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */
ti,nand-ecc-opt = "sw";
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 69a40cf..f802bcf 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -720,6 +720,10 @@
gpmc,num-waitpins = <4>;
#address-cells = <2>;
#size-cells = <1>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
};
usb_otg_hs: usb_otg_hs@480ab000 {
diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts
index 16b0cdf..3f113c5 100644
--- a/arch/arm/boot/dts/omap3430-sdp.dts
+++ b/arch/arm/boot/dts/omap3430-sdp.dts
@@ -103,10 +103,13 @@
};
nand@1,0 {
+ compatible = "ti,omap2-nand";
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&intc>;
+ interrupts = <20>;
linux,mtd-name= "micron,mt29f1g08abb";
#address-cells = <1>;
#size-cells = <1>;
- reg = <1 0 4>; /* CS1, offset 0, IO size 4 */
ti,nand-ecc-opt = "sw";
nand-bus-width = <8>;
gpmc,cs-on-ns = <0>;
--
2.1.4
next prev parent reply other threads:[~2015-09-18 14:56 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-18 14:53 [PATCH v3 00/27] memory: omap-gpmc: mtd: nand: Support GPMC NAND on non-OMAP platforms Roger Quadros
2015-09-18 14:53 ` [PATCH v3 01/27] ARM: OMAP2+: gpmc: Add platform data Roger Quadros
2015-09-18 14:53 ` [PATCH v3 02/27] ARM: OMAP2+: gpmc: Add gpmc timings and settings to " Roger Quadros
2015-09-18 14:53 ` [PATCH v3 03/27] memory: omap-gpmc: Introduce GPMC to NAND interface Roger Quadros
2015-09-18 14:53 ` [PATCH v3 04/27] mtd: nand: omap2: Use gpmc_omap_get_nand_ops() to get NAND registers Roger Quadros
2015-12-03 5:00 ` Brian Norris
2015-09-18 14:53 ` [PATCH v3 05/27] memory: omap-gpmc: Add GPMC-NAND ops to get writebufferempty status Roger Quadros
2015-09-18 14:53 ` [PATCH v3 06/27] mtd: nand: omap2: Switch to using GPMC-NAND ops for writebuffer empty check Roger Quadros
2015-09-18 14:53 ` [PATCH v3 07/27] memory: omap-gpmc: Remove NAND IRQ code Roger Quadros
2015-09-18 14:53 ` [PATCH v3 08/27] memory: omap-gpmc: Add IRQ ops for GPMC-NAND interface Roger Quadros
2015-09-18 14:53 ` [PATCH v3 09/27] mtd: nand: omap2: manage NAND interrupts Roger Quadros
2015-09-18 14:53 ` [PATCH v3 10/27] mtd: nand: omap: Copy platform data parameters to omap_nand_info data Roger Quadros
2015-09-18 14:53 ` [PATCH v3 11/27] mtd: nand: omap: Clean up device tree support Roger Quadros
2015-10-06 10:35 ` [PATCH v4 " Roger Quadros
2015-12-03 4:29 ` Brian Norris
2015-12-03 5:57 ` Roger Quadros
2015-12-03 6:09 ` Brian Norris
2015-09-18 14:53 ` [PATCH v3 12/27] mtd: nand: omap: Update DT binding documentation Roger Quadros
2015-09-18 14:53 ` [PATCH v3 13/27] memory: omap-gpmc: Prevent mapping into 1st 16MB Roger Quadros
2015-09-18 14:53 ` [PATCH v3 14/27] memory: omap-gpmc: Move device tree binding to correct location Roger Quadros
2015-09-18 14:53 ` [PATCH v3 15/27] memory: omap-gpmc: Support general purpose input for WAITPINs Roger Quadros
2015-09-18 14:53 ` [PATCH v3 16/27] memory: omap-gpmc: Reserve WAITPIN if needed for WAIT monitoring Roger Quadros
2015-09-18 14:53 ` [PATCH v3 17/27] memory: omap-gpmc: Add irqchip support to the gpiochip Roger Quadros
2015-09-18 14:53 ` [PATCH v3 18/27] mtd: nand: omap2: Implement NAND ready using gpiolib Roger Quadros
2015-10-26 20:49 ` Brian Norris
2015-10-27 8:03 ` Roger Quadros
2015-10-27 8:12 ` Boris Brezillon
2015-10-27 8:43 ` Roger Quadros
2015-10-27 8:28 ` Boris Brezillon
2015-12-03 4:45 ` Brian Norris
2015-12-03 8:41 ` Boris Brezillon
2015-09-18 14:53 ` [PATCH v3 19/27] memory: omap-gpmc: Prevent GPMC_STATUS from being accessed via gpmc_regs Roger Quadros
2015-09-18 14:53 ` [PATCH v3 20/27] ARM: dts: dra7: Fix NAND device nodes Roger Quadros
2015-10-14 13:34 ` Franklin S Cooper Jr.
2015-10-14 14:17 ` Roger Quadros
2015-10-14 14:37 ` Franklin S Cooper Jr.
2015-09-18 14:53 ` [PATCH v3 21/27] ARM: dts: dra7x-evm: Provide NAND ready pin Roger Quadros
2015-09-18 14:53 ` [PATCH v3 22/27] ARM: dts: am437x: Fix NAND device nodes Roger Quadros
2015-09-18 14:53 ` [PATCH v3 23/27] ARM: dts: am437x-gp-evm: Provide NAND ready pin Roger Quadros
2015-09-18 14:53 ` [PATCH v3 24/27] ARM: dts: am335x: Fix NAND device nodes Roger Quadros
2015-09-18 14:53 ` [PATCH v3 25/27] ARM: dts: am335x: Provide NAND ready pin Roger Quadros
2015-09-18 14:53 ` [PATCH v3 26/27] ARM: dts: dm816x: Fix gpmc and NAND node Roger Quadros
2015-09-18 14:53 ` Roger Quadros [this message]
2015-10-13 0:43 ` [PATCH v3 27/27] ARM: dts: omap3: Fix gpmc and NAND nodes Tony Lindgren
2015-10-13 6:29 ` Roger Quadros
2015-10-13 15:18 ` Tony Lindgren
2015-10-14 7:39 ` Roger Quadros
2015-10-14 8:55 ` [PATCH v4 " Roger Quadros
2015-09-30 7:39 ` [PATCH v3 00/27] memory: omap-gpmc: mtd: nand: Support GPMC NAND on non-OMAP platforms Roger Quadros
2015-09-30 11:00 ` Roger Quadros
2015-10-06 8:33 ` Tony Lindgren
2015-10-06 9:54 ` Roger Quadros
2015-10-06 10:00 ` Tony Lindgren
2015-10-06 10:05 ` Roger Quadros
2015-10-06 10:28 ` Roger Quadros
2015-10-06 11:01 ` Tony Lindgren
2015-10-06 11:09 ` Roger Quadros
2015-10-16 21:25 ` Tony Lindgren
2015-10-19 7:08 ` Roger Quadros
2015-10-21 8:31 ` Roger Quadros
2015-10-21 15:20 ` Tony Lindgren
2015-10-23 7:09 ` Roger Quadros
2015-11-30 17:26 ` Tony Lindgren
2015-10-26 21:23 ` Brian Norris
2015-10-27 9:37 ` Roger Quadros
2015-11-25 10:42 ` Roger Quadros
2015-11-30 19:54 ` Brian Norris
2015-12-01 14:41 ` Roger Quadros
2015-12-02 3:26 ` Brian Norris
2015-12-02 5:12 ` Roger Quadros
2015-12-02 15:03 ` Tony Lindgren
2015-12-02 18:13 ` Brian Norris
2015-12-02 20:05 ` Tony Lindgren
2015-12-02 18:43 ` Brian Norris
2015-12-03 5:09 ` Brian Norris
2015-12-03 6:08 ` Roger Quadros
2015-12-03 6:22 ` Brian Norris
2015-12-03 9:01 ` Roger Quadros
2015-12-03 15:17 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1442588029-13769-28-git-send-email-rogerq@ti.com \
--to=rogerq@ti.com \
--cc=computersforpeace@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dwmw2@infradead.org \
--cc=ezequiel@vanguardiasur.com.ar \
--cc=fcooper@ti.com \
--cc=javier@dowhile0.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=nsekhar@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).