linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Roger Quadros <rogerq@ti.com>
To: <tony@atomide.com>
Cc: <dwmw2@infradead.org>, <computersforpeace@gmail.com>,
	<ezequiel@vanguardiasur.com.ar>, <javier@dowhile0.org>,
	<fcooper@ti.com>, <nsekhar@ti.com>,
	<linux-mtd@lists.infradead.org>, <linux-omap@vger.kernel.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	Roger Quadros <rogerq@ti.com>
Subject: [PATCH v3 21/27] ARM: dts: dra7x-evm: Provide NAND ready pin
Date: Fri, 18 Sep 2015 17:53:43 +0300	[thread overview]
Message-ID: <1442588029-13769-22-git-send-email-rogerq@ti.com> (raw)
In-Reply-To: <1442588029-13769-1-git-send-email-rogerq@ti.com>

On these boards NAND ready pin status is avilable over
GPMC_WAIT0 pin.

Read speed increases from 13768 KiB/ to 17246 KiB/s.
Write speed was unchanged at 7123 KiB/s.
Measured using mtd_speedtest.ko.

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
 arch/arm/boot/dts/dra7-evm.dts  | 1 +
 arch/arm/boot/dts/dra72-evm.dts | 1 +
 2 files changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 8a31161..4760562 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -591,6 +591,7 @@
 		reg = <0 0 4>;		/* device IO registers */
 		interrupt-parent = <&crossbar_mpu>;
 		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		ready-gpio = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */
 		ti,nand-ecc-opt = "bch8";
 		ti,elm-id = <&elm>;
 		nand-bus-width = <16>;
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
index 245f5f9..a11a646 100644
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -405,6 +405,7 @@
 		reg = <0 0 4>;		/* device IO registers */
 		interrupt-parent = <&crossbar_mpu>;
 		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		ready-gpio = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */
 		ti,nand-ecc-opt = "bch8";
 		ti,elm-id = <&elm>;
 		nand-bus-width = <16>;
-- 
2.1.4


  parent reply	other threads:[~2015-09-18 14:56 UTC|newest]

Thread overview: 79+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-09-18 14:53 [PATCH v3 00/27] memory: omap-gpmc: mtd: nand: Support GPMC NAND on non-OMAP platforms Roger Quadros
2015-09-18 14:53 ` [PATCH v3 01/27] ARM: OMAP2+: gpmc: Add platform data Roger Quadros
2015-09-18 14:53 ` [PATCH v3 02/27] ARM: OMAP2+: gpmc: Add gpmc timings and settings to " Roger Quadros
2015-09-18 14:53 ` [PATCH v3 03/27] memory: omap-gpmc: Introduce GPMC to NAND interface Roger Quadros
2015-09-18 14:53 ` [PATCH v3 04/27] mtd: nand: omap2: Use gpmc_omap_get_nand_ops() to get NAND registers Roger Quadros
2015-12-03  5:00   ` Brian Norris
2015-09-18 14:53 ` [PATCH v3 05/27] memory: omap-gpmc: Add GPMC-NAND ops to get writebufferempty status Roger Quadros
2015-09-18 14:53 ` [PATCH v3 06/27] mtd: nand: omap2: Switch to using GPMC-NAND ops for writebuffer empty check Roger Quadros
2015-09-18 14:53 ` [PATCH v3 07/27] memory: omap-gpmc: Remove NAND IRQ code Roger Quadros
2015-09-18 14:53 ` [PATCH v3 08/27] memory: omap-gpmc: Add IRQ ops for GPMC-NAND interface Roger Quadros
2015-09-18 14:53 ` [PATCH v3 09/27] mtd: nand: omap2: manage NAND interrupts Roger Quadros
2015-09-18 14:53 ` [PATCH v3 10/27] mtd: nand: omap: Copy platform data parameters to omap_nand_info data Roger Quadros
2015-09-18 14:53 ` [PATCH v3 11/27] mtd: nand: omap: Clean up device tree support Roger Quadros
2015-10-06 10:35   ` [PATCH v4 " Roger Quadros
2015-12-03  4:29     ` Brian Norris
2015-12-03  5:57       ` Roger Quadros
2015-12-03  6:09         ` Brian Norris
2015-09-18 14:53 ` [PATCH v3 12/27] mtd: nand: omap: Update DT binding documentation Roger Quadros
2015-09-18 14:53 ` [PATCH v3 13/27] memory: omap-gpmc: Prevent mapping into 1st 16MB Roger Quadros
2015-09-18 14:53 ` [PATCH v3 14/27] memory: omap-gpmc: Move device tree binding to correct location Roger Quadros
2015-09-18 14:53 ` [PATCH v3 15/27] memory: omap-gpmc: Support general purpose input for WAITPINs Roger Quadros
2015-09-18 14:53 ` [PATCH v3 16/27] memory: omap-gpmc: Reserve WAITPIN if needed for WAIT monitoring Roger Quadros
2015-09-18 14:53 ` [PATCH v3 17/27] memory: omap-gpmc: Add irqchip support to the gpiochip Roger Quadros
2015-09-18 14:53 ` [PATCH v3 18/27] mtd: nand: omap2: Implement NAND ready using gpiolib Roger Quadros
2015-10-26 20:49   ` Brian Norris
2015-10-27  8:03     ` Roger Quadros
2015-10-27  8:12       ` Boris Brezillon
2015-10-27  8:43         ` Roger Quadros
2015-10-27  8:28     ` Boris Brezillon
2015-12-03  4:45       ` Brian Norris
2015-12-03  8:41         ` Boris Brezillon
2015-09-18 14:53 ` [PATCH v3 19/27] memory: omap-gpmc: Prevent GPMC_STATUS from being accessed via gpmc_regs Roger Quadros
2015-09-18 14:53 ` [PATCH v3 20/27] ARM: dts: dra7: Fix NAND device nodes Roger Quadros
2015-10-14 13:34   ` Franklin S Cooper Jr.
2015-10-14 14:17     ` Roger Quadros
2015-10-14 14:37       ` Franklin S Cooper Jr.
2015-09-18 14:53 ` Roger Quadros [this message]
2015-09-18 14:53 ` [PATCH v3 22/27] ARM: dts: am437x: " Roger Quadros
2015-09-18 14:53 ` [PATCH v3 23/27] ARM: dts: am437x-gp-evm: Provide NAND ready pin Roger Quadros
2015-09-18 14:53 ` [PATCH v3 24/27] ARM: dts: am335x: Fix NAND device nodes Roger Quadros
2015-09-18 14:53 ` [PATCH v3 25/27] ARM: dts: am335x: Provide NAND ready pin Roger Quadros
2015-09-18 14:53 ` [PATCH v3 26/27] ARM: dts: dm816x: Fix gpmc and NAND node Roger Quadros
2015-09-18 14:53 ` [PATCH v3 27/27] ARM: dts: omap3: Fix gpmc and NAND nodes Roger Quadros
2015-10-13  0:43   ` Tony Lindgren
2015-10-13  6:29     ` Roger Quadros
2015-10-13 15:18       ` Tony Lindgren
2015-10-14  7:39         ` Roger Quadros
2015-10-14  8:55   ` [PATCH v4 " Roger Quadros
2015-09-30  7:39 ` [PATCH v3 00/27] memory: omap-gpmc: mtd: nand: Support GPMC NAND on non-OMAP platforms Roger Quadros
2015-09-30 11:00 ` Roger Quadros
2015-10-06  8:33   ` Tony Lindgren
2015-10-06  9:54     ` Roger Quadros
2015-10-06 10:00       ` Tony Lindgren
2015-10-06 10:05         ` Roger Quadros
2015-10-06 10:28           ` Roger Quadros
2015-10-06 11:01             ` Tony Lindgren
2015-10-06 11:09               ` Roger Quadros
2015-10-16 21:25                 ` Tony Lindgren
2015-10-19  7:08                   ` Roger Quadros
2015-10-21  8:31                     ` Roger Quadros
2015-10-21 15:20                       ` Tony Lindgren
2015-10-23  7:09                         ` Roger Quadros
2015-11-30 17:26                           ` Tony Lindgren
2015-10-26 21:23 ` Brian Norris
2015-10-27  9:37   ` Roger Quadros
2015-11-25 10:42     ` Roger Quadros
2015-11-30 19:54     ` Brian Norris
2015-12-01 14:41       ` Roger Quadros
2015-12-02  3:26         ` Brian Norris
2015-12-02  5:12           ` Roger Quadros
2015-12-02 15:03             ` Tony Lindgren
2015-12-02 18:13               ` Brian Norris
2015-12-02 20:05                 ` Tony Lindgren
2015-12-02 18:43             ` Brian Norris
2015-12-03  5:09 ` Brian Norris
2015-12-03  6:08   ` Roger Quadros
2015-12-03  6:22     ` Brian Norris
2015-12-03  9:01       ` Roger Quadros
2015-12-03 15:17         ` Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1442588029-13769-22-git-send-email-rogerq@ti.com \
    --to=rogerq@ti.com \
    --cc=computersforpeace@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dwmw2@infradead.org \
    --cc=ezequiel@vanguardiasur.com.ar \
    --cc=fcooper@ti.com \
    --cc=javier@dowhile0.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=nsekhar@ti.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).