From: Yakir Yang <ykk@rock-chips.com>
To: Inki Dae <inki.dae@samsung.com>,
Andrzej Hajda <a.hajda@samsung.com>,
Joonyoung Shim <jy0922.shim@samsung.com>,
Seung-Woo Kim <sw0312.kim@samsung.com>,
Kyungmin Park <kyungmin.park@samsung.com>,
Jingoo Han <jingoohan1@gmail.com>,
Thierry Reding <treding@nvidia.com>,
Krzysztof Kozlowski <k.kozlowski@samsung.com>,
Rob Herring <robh+dt@kernel.org>,
Heiko Stuebner <heiko@sntech.de>,
Mark Yao <mark.yao@rock-chips.com>
Cc: Russell King <linux@arm.linux.org.uk>,
djkurtz@chromium.org, dianders@chromium.org,
Sean Paul <seanpaul@chromium.org>, Kukjin Kim <kgene@kernel.org>,
Kumar Gala <galak@codeaurora.org>,
emil.l.velikov@gmail.com,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Gustavo Padovan <gustavo.padovan@collabora.co.uk>,
Kishon Vijay Abraham I <kishon@ti.com>,
Pawel Moll <pawel.moll@arm.com>,
ajaynumb@gmail.com, robherring2@gmail.com,
javier@osg.samsung.com, Andy Yan <andy.yan@rock-chips.com>,
Yakir Yang <ykk@rock-chips.com>,
dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-samsung-soc@vger.kernel.org,
linux-rockchip@lists.infradead.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v8 13/17] drm: bridge: analogix/dp: add some rk3288 special registers setting
Date: Wed, 28 Oct 2015 16:55:20 +0800 [thread overview]
Message-ID: <1446022520-16825-1-git-send-email-ykk@rock-chips.com> (raw)
In-Reply-To: <1446020143-32645-1-git-send-email-ykk@rock-chips.com>
RK3288 need some special registers setting, we can separate
them out by the dev_type of plat_data.
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
---
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2:
- Fix compile failed dut to phy_pd_addr variable misspell error
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 76 ++++++++++++++---------
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h | 12 ++++
2 files changed, 60 insertions(+), 28 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
index 861097a..21a3287 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
@@ -15,6 +15,8 @@
#include <linux/delay.h>
#include <linux/gpio.h>
+#include <drm/bridge/analogix_dp.h>
+
#include "analogix_dp_core.h"
#include "analogix_dp_reg.h"
@@ -72,6 +74,14 @@ void analogix_dp_init_analog_param(struct analogix_dp_device *dp)
reg = SEL_24M | TX_DVDD_BIT_1_0625V;
writel(reg, dp->reg_base + ANALOGIX_DP_ANALOG_CTL_2);
+ if (dp->plat_data && (dp->plat_data->dev_type == RK3288_DP)) {
+ writel(REF_CLK_24M, dp->reg_base + ANALOGIX_DP_PLL_REG_1);
+ writel(0x95, dp->reg_base + ANALOGIX_DP_PLL_REG_2);
+ writel(0x40, dp->reg_base + ANALOGIX_DP_PLL_REG_3);
+ writel(0x58, dp->reg_base + ANALOGIX_DP_PLL_REG_4);
+ writel(0x22, dp->reg_base + ANALOGIX_DP_PLL_REG_5);
+ }
+
reg = DRIVE_DVDD_BIT_1_0625V | VCO_BIT_600_MICRO;
writel(reg, dp->reg_base + ANALOGIX_DP_ANALOG_CTL_3);
@@ -206,81 +216,85 @@ void analogix_dp_set_analog_power_down(struct analogix_dp_device *dp,
bool enable)
{
u32 reg;
+ u32 phy_pd_addr = ANALOGIX_DP_PHY_PD;
+
+ if (dp->plat_data && (dp->plat_data->dev_type == RK3288_DP))
+ phy_pd_addr = ANALOGIX_DP_PD;
switch (block) {
case AUX_BLOCK:
if (enable) {
- reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg = readl(dp->reg_base + phy_pd_addr);
reg |= AUX_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
} else {
- reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg = readl(dp->reg_base + phy_pd_addr);
reg &= ~AUX_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
}
break;
case CH0_BLOCK:
if (enable) {
- reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg = readl(dp->reg_base + phy_pd_addr);
reg |= CH0_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
} else {
- reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg = readl(dp->reg_base + phy_pd_addr);
reg &= ~CH0_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
}
break;
case CH1_BLOCK:
if (enable) {
- reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg = readl(dp->reg_base + phy_pd_addr);
reg |= CH1_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
} else {
- reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg = readl(dp->reg_base + phy_pd_addr);
reg &= ~CH1_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
}
break;
case CH2_BLOCK:
if (enable) {
- reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg = readl(dp->reg_base + phy_pd_addr);
reg |= CH2_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
} else {
- reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg = readl(dp->reg_base + phy_pd_addr);
reg &= ~CH2_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
}
break;
case CH3_BLOCK:
if (enable) {
- reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg = readl(dp->reg_base + phy_pd_addr);
reg |= CH3_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
} else {
- reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg = readl(dp->reg_base + phy_pd_addr);
reg &= ~CH3_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
}
break;
case ANALOG_TOTAL:
if (enable) {
- reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg = readl(dp->reg_base + phy_pd_addr);
reg |= DP_PHY_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
} else {
- reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg = readl(dp->reg_base + phy_pd_addr);
reg &= ~DP_PHY_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
}
break;
case POWER_ALL:
if (enable) {
reg = DP_PHY_PD | AUX_PD | CH3_PD | CH2_PD |
CH1_PD | CH0_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
} else {
- writel(0x00, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(0x00, dp->reg_base + phy_pd_addr);
}
break;
default:
@@ -399,8 +413,14 @@ void analogix_dp_init_aux(struct analogix_dp_device *dp)
analogix_dp_reset_aux(dp);
/* Disable AUX transaction H/W retry */
- reg = AUX_BIT_PERIOD_EXPECTED_DELAY(3) | AUX_HW_RETRY_COUNT_SEL(0) |
- AUX_HW_RETRY_INTERVAL_600_MICROSECONDS;
+ if (dp->plat_data && (dp->plat_data->dev_type == RK3288_DP))
+ reg = AUX_BIT_PERIOD_EXPECTED_DELAY(0) |
+ AUX_HW_RETRY_COUNT_SEL(3) |
+ AUX_HW_RETRY_INTERVAL_600_MICROSECONDS;
+ else
+ reg = AUX_BIT_PERIOD_EXPECTED_DELAY(3) |
+ AUX_HW_RETRY_COUNT_SEL(0) |
+ AUX_HW_RETRY_INTERVAL_600_MICROSECONDS;
writel(reg, dp->reg_base + ANALOGIX_DP_AUX_HW_RETRY_CTL);
/* Receive AUX Channel DEFER commands equal to DEFFER_COUNT*64 */
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
index 738db4c..337912b 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
@@ -22,6 +22,14 @@
#define ANALOGIX_DP_VIDEO_CTL_8 0x3C
#define ANALOGIX_DP_VIDEO_CTL_10 0x44
+#define ANALOGIX_DP_PLL_REG_1 0xfc
+#define ANALOGIX_DP_PLL_REG_2 0x9e4
+#define ANALOGIX_DP_PLL_REG_3 0x9e8
+#define ANALOGIX_DP_PLL_REG_4 0x9ec
+#define ANALOGIX_DP_PLL_REG_5 0xa00
+
+#define ANALOGIX_DP_PD 0x12c
+
#define ANALOGIX_DP_LANE_MAP 0x35C
#define ANALOGIX_DP_ANALOG_CTL_1 0x370
@@ -154,6 +162,10 @@
#define VSYNC_POLARITY_CFG (0x1 << 1)
#define HSYNC_POLARITY_CFG (0x1 << 0)
+/* ANALOGIX_DP_PLL_REG_1 */
+#define REF_CLK_24M (0x1 << 1)
+#define REF_CLK_27M (0x0 << 1)
+
/* ANALOGIX_DP_LANE_MAP */
#define LANE3_MAP_LOGIC_LANE_0 (0x0 << 6)
#define LANE3_MAP_LOGIC_LANE_1 (0x1 << 6)
--
1.9.1
next prev parent reply other threads:[~2015-10-28 8:56 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-28 8:15 [PATCH v8 0/17] Add Analogix Core Display Port Driver Yakir Yang
2015-10-28 8:19 ` [PATCH v8 01/17] drm: exynos: dp: convert to drm bridge mode Yakir Yang
2016-03-22 22:22 ` Inki Dae
2015-10-28 8:21 ` [PATCH v8 02/17] drm: bridge: analogix/dp: split exynos dp driver to bridge directory Yakir Yang
2015-11-26 17:30 ` Heiko Stübner
2015-11-27 1:20 ` Yakir Yang
2015-11-27 8:42 ` Heiko Stübner
2015-10-28 8:23 ` [PATCH v8 03/17] drm: bridge: analogix/dp: fix some obvious code style Yakir Yang
2015-10-28 8:24 ` [PATCH v8 04/17] drm: bridge: analogix/dp: remove duplicate configuration of link rate and link count Yakir Yang
2015-10-28 8:25 ` [PATCH v8 05/17] drm: bridge: analogix/dp: dynamic parse sync_pol & interlace & dynamic_range Yakir Yang
2015-10-28 8:26 ` [PATCH v8 06/17] dt-bindings: add document for analogix display port driver Yakir Yang
2015-10-28 20:02 ` Heiko Stuebner
2015-10-29 1:12 ` Yakir Yang
2015-10-29 8:40 ` Heiko Stuebner
2015-10-28 8:27 ` [PATCH v8 07/17] ARM: dts: exynos/dp: remove some properties that deprecated by analogix_dp driver Yakir Yang
2015-10-28 8:27 ` [PATCH v8 08/17] drm: rockchip: dp: add rockchip platform dp driver Yakir Yang
2015-11-27 8:41 ` Heiko Stübner
2015-10-28 8:28 ` [PATCH v8 09/17] dt-bindings: add document for rockchip variant of analogix_dp Yakir Yang
2015-10-30 16:46 ` Rob Herring
2015-10-31 3:15 ` Yakir Yang
2015-10-28 8:30 ` [PATCH v8 10/17] phy: Add driver for rockchip Display Port PHY Yakir Yang
2015-10-28 20:36 ` Heiko Stuebner
2015-10-29 1:14 ` Yakir Yang
2015-11-11 23:23 ` Heiko Stuebner
[not found] ` <5643FB43.6090408@rock-chips.com>
2015-11-12 9:21 ` Heiko Stuebner
2015-10-28 8:31 ` [PATCH v8 11/17] dt-bindings: add document for rockchip dp phy Yakir Yang
2015-10-30 16:42 ` Rob Herring
2015-10-31 3:13 ` Yakir Yang
2015-10-28 8:52 ` [PATCH v8 12/17] drm: rockchip: vop: add bpc and color mode setting Yakir Yang
2015-10-28 8:55 ` Yakir Yang [this message]
2015-10-28 8:56 ` [PATCH v8 14/17] drm: bridge: analogix/dp: add max link rate and lane count limit for RK3288 Yakir Yang
2015-11-27 13:32 ` Heiko Stübner
2015-12-02 10:46 ` Yakir Yang
2015-10-28 9:12 ` [PATCH v8 16/17] drm: bridge: analogix/dp: move hpd detect to connector detect function Yakir Yang
2015-10-28 9:13 ` [PATCH v8 17/17] drm: bridge: analogix/dp: add edid modes parse in get_modes method Yakir Yang
2015-10-29 1:58 ` [PATCH v9 10/17] phy: Add driver for rockchip Display Port PHY Yakir Yang
2015-11-03 4:38 ` Brian Norris
2015-11-04 0:48 ` Yakir Yang
2015-11-04 1:13 ` Brian Norris
2015-11-05 23:45 ` Brian Norris
2015-11-17 12:58 ` Yakir Yang
2015-10-29 17:49 ` [PATCH v8 0/17] Add Analogix Core Display Port Driver Heiko Stuebner
2015-10-30 1:05 ` Yakir Yang
2015-10-30 1:09 ` [PATCH v9 15/17] drm: bridge: analogix/dp: try force hpd after plug in lookup failed Yakir Yang
2015-11-11 23:10 ` Rob Herring
[not found] ` <5643EAF9.9020508@rock-chips.com>
2015-11-12 23:38 ` Rob Herring
2015-10-31 6:30 ` [PATCH v9 09/17] dt-bindings: add document for rockchip variant of analogix_dp Yakir Yang
2015-10-31 6:40 ` Yakir Yang
2015-10-31 6:42 ` [PATCH v10 " Yakir Yang
2015-10-31 18:37 ` Rob Herring
2015-11-02 0:41 ` Yakir Yang
2015-11-17 13:09 ` [PATCH v10 10/17] phy: Add driver for rockchip Display Port PHY Yakir Yang
2015-11-17 13:31 ` [PATCH v8 0/17] Add Analogix Core Display Port Driver Yakir Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1446022520-16825-1-git-send-email-ykk@rock-chips.com \
--to=ykk@rock-chips.com \
--cc=a.hajda@samsung.com \
--cc=ajaynumb@gmail.com \
--cc=andy.yan@rock-chips.com \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=djkurtz@chromium.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=emil.l.velikov@gmail.com \
--cc=galak@codeaurora.org \
--cc=gustavo.padovan@collabora.co.uk \
--cc=heiko@sntech.de \
--cc=ijc+devicetree@hellion.org.uk \
--cc=inki.dae@samsung.com \
--cc=javier@osg.samsung.com \
--cc=jingoohan1@gmail.com \
--cc=jy0922.shim@samsung.com \
--cc=k.kozlowski@samsung.com \
--cc=kgene@kernel.org \
--cc=kishon@ti.com \
--cc=kyungmin.park@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.yao@rock-chips.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=robherring2@gmail.com \
--cc=seanpaul@chromium.org \
--cc=sw0312.kim@samsung.com \
--cc=treding@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).