[PATCH v5 0/4] The SipHash Patchset

[PATCH v5 0/4] The SipHash Patchset

[Jason A. Donenfeld]

Hey folks,

I think we're approaching the end of the review for this patchset and we're
getting somewhat close to being ready for it being queued up. At this point,
I've incorporated all of the extremely helpful and instructive suggestions
from the list.

For this v5, we now accept u64[2] as the key, so that alignment is taken
care of naturally. For other alignment issues, we have both the fast aligned
version and the unaligned version, depending on what's necessary. We've
worked out the issues for struct padding. The functions now take a void
pointer to avoid ugly casting, which also helps us shed the inline helper
functions which were not very pretty. The replacements of MD5 have been
benchmarked and show a big increase in speed. We've even come up with a
better naming scheme for dword/qword. All and all it's shaping up nicely.

So, if this series looks good to you, please send along your Reviewed-by,
so we can begin to get this completed. If there are still lingering issues,
let me know and I'll incorporated them into a v6 if necessary.

Thanks,
Jason

Jason A. Donenfeld (4):
  siphash: add cryptographically secure PRF
  siphash: add Nu{32,64} helpers
  secure_seq: use SipHash in place of MD5
  random: use SipHash in place of MD5

 drivers/char/random.c   |  32 +++----
 include/linux/siphash.h |  65 ++++++++++++++
 lib/Kconfig.debug       |   6 +-
 lib/Makefile            |   5 +-
 lib/siphash.c           | 223 ++++++++++++++++++++++++++++++++++++++++++++++++
 lib/test_siphash.c      | 101 ++++++++++++++++++++++
 net/core/secure_seq.c   | 133 +++++++++++------------------
 7 files changed, 460 insertions(+), 105 deletions(-)
 create mode 100644 include/linux/siphash.h
 create mode 100644 lib/siphash.c
 create mode 100644 lib/test_siphash.c

-- 
2.11.0

[PATCH v5 1/4] siphash: add cryptographically secure PRF

[Jason A. Donenfeld]

SipHash is a 64-bit keyed hash function that is actually a
cryptographically secure PRF, like HMAC. Except SipHash is super fast,
and is meant to be used as a hashtable keyed lookup function, or as a
general PRF for short input use cases, such as sequence numbers or RNG
chaining.

For the first usage:

There are a variety of attacks known as "hashtable poisoning" in which an
attacker forms some data such that the hash of that data will be the
same, and then preceeds to fill up all entries of a hashbucket. This is
a realistic and well-known denial-of-service vector. Currently
hashtables use jhash, which is fast but not secure, and some kind of
rotating key scheme (or none at all, which isn't good). SipHash is meant
as a replacement for jhash in these cases.

There are a modicum of places in the kernel that are vulnerable to
hashtable poisoning attacks, either via userspace vectors or network
vectors, and there's not a reliable mechanism inside the kernel at the
moment to fix it. The first step toward fixing these issues is actually
getting a secure primitive into the kernel for developers to use. Then
we can, bit by bit, port things over to it as deemed appropriate.

While SipHash is extremely fast for a cryptographically secure function,
it is likely a tiny bit slower than the insecure jhash, and so replacements
will be evaluated on a case-by-case basis based on whether or not the
difference in speed is negligible and whether or not the current jhash usage
poses a real security risk.

For the second usage:

A few places in the kernel are using MD5 for creating secure sequence
numbers, port numbers, or fast random numbers. SipHash is a faster, more
fitting, and more secure replacement for MD5 in those situations.
Replacing MD5 with SipHash for these uses is obvious and straight-
forward, and so is submitted along with this patch series. There
shouldn't be much of a debate over its efficacy.

Dozens of languages are already using this internally for their hash
tables and PRFs. Some of the BSDs already use this in their kernels.
SipHash is a widely known high-speed solution to a widely known set of
problems, and it's time we catch-up.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Jean-Philippe Aumasson <jeanphilippe.aumasson@gmail.com>
Cc: Daniel J. Bernstein <djb@cr.yp.to>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: David Laight <David.Laight@aculab.com>
---
 include/linux/siphash.h |  32 +++++++++++
 lib/Kconfig.debug       |   6 +--
 lib/Makefile            |   5 +-
 lib/siphash.c           | 138 ++++++++++++++++++++++++++++++++++++++++++++++++
 lib/test_siphash.c      |  83 +++++++++++++++++++++++++++++
 5 files changed, 259 insertions(+), 5 deletions(-)
 create mode 100644 include/linux/siphash.h
 create mode 100644 lib/siphash.c
 create mode 100644 lib/test_siphash.c

diff --git a/include/linux/siphash.h b/include/linux/siphash.h
new file mode 100644
index 000000000000..145cf5667078
--- /dev/null
+++ b/include/linux/siphash.h
@@ -0,0 +1,32 @@
+/* Copyright (C) 2016 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
+ *
+ * This file is provided under a dual BSD/GPLv2 license.
+ *
+ * SipHash: a fast short-input PRF
+ * https://131002.net/siphash/
+ *
+ * This implementation is specifically for SipHash2-4.
+ */
+
+#ifndef _LINUX_SIPHASH_H
+#define _LINUX_SIPHASH_H
+
+#include <linux/types.h>
+
+#define SIPHASH_ALIGNMENT 8
+
+typedef u64 siphash_key_t[2];
+
+u64 siphash(const void *data, size_t len, const siphash_key_t key);
+
+#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+static inline u64 siphash_unaligned(const void *data, size_t len,
+				    const siphash_key_t key)
+{
+	return siphash(data, len, key);
+}
+#else
+u64 siphash_unaligned(const void *data, size_t len, const siphash_key_t key);
+#endif
+
+#endif /* _LINUX_SIPHASH_H */
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 7446097f72bd..86254ea99b45 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -1843,9 +1843,9 @@ config TEST_HASH
 	tristate "Perform selftest on hash functions"
 	default n
 	help
-	  Enable this option to test the kernel's integer (<linux/hash,h>)
-	  and string (<linux/stringhash.h>) hash functions on boot
-	  (or module load).
+	  Enable this option to test the kernel's integer (<linux/hash.h>),
+	  string (<linux/stringhash.h>), and siphash (<linux/siphash.h>)
+	  hash functions on boot (or module load).
 
 	  This is intended to help people writing architecture-specific
 	  optimized versions.  If unsure, say N.
diff --git a/lib/Makefile b/lib/Makefile
index 50144a3aeebd..71d398b04a74 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -22,7 +22,8 @@ lib-y := ctype.o string.o vsprintf.o cmdline.o \
 	 sha1.o chacha20.o md5.o irq_regs.o argv_split.o \
 	 flex_proportions.o ratelimit.o show_mem.o \
 	 is_single_threaded.o plist.o decompress.o kobject_uevent.o \
-	 earlycpio.o seq_buf.o nmi_backtrace.o nodemask.o win_minmax.o
+	 earlycpio.o seq_buf.o siphash.o \
+	 nmi_backtrace.o nodemask.o win_minmax.o
 
 lib-$(CONFIG_MMU) += ioremap.o
 lib-$(CONFIG_SMP) += cpumask.o
@@ -44,7 +45,7 @@ obj-$(CONFIG_TEST_HEXDUMP) += test_hexdump.o
 obj-y += kstrtox.o
 obj-$(CONFIG_TEST_BPF) += test_bpf.o
 obj-$(CONFIG_TEST_FIRMWARE) += test_firmware.o
-obj-$(CONFIG_TEST_HASH) += test_hash.o
+obj-$(CONFIG_TEST_HASH) += test_hash.o test_siphash.o
 obj-$(CONFIG_TEST_KASAN) += test_kasan.o
 obj-$(CONFIG_TEST_KSTRTOX) += test-kstrtox.o
 obj-$(CONFIG_TEST_LKM) += test_module.o
diff --git a/lib/siphash.c b/lib/siphash.c
new file mode 100644
index 000000000000..afc13cbb1b78
--- /dev/null
+++ b/lib/siphash.c
@@ -0,0 +1,138 @@
+/* Copyright (C) 2016 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
+ *
+ * This file is provided under a dual BSD/GPLv2 license.
+ *
+ * SipHash: a fast short-input PRF
+ * https://131002.net/siphash/
+ *
+ * This implementation is specifically for SipHash2-4.
+ */
+
+#include <linux/siphash.h>
+#include <linux/kernel.h>
+#include <asm/unaligned.h>
+
+#if defined(CONFIG_DCACHE_WORD_ACCESS) && BITS_PER_LONG == 64
+#include <linux/dcache.h>
+#include <asm/word-at-a-time.h>
+#endif
+
+#define SIPROUND \
+	do { \
+	v0 += v1; v1 = rol64(v1, 13); v1 ^= v0; v0 = rol64(v0, 32); \
+	v2 += v3; v3 = rol64(v3, 16); v3 ^= v2; \
+	v0 += v3; v3 = rol64(v3, 21); v3 ^= v0; \
+	v2 += v1; v1 = rol64(v1, 17); v1 ^= v2; v2 = rol64(v2, 32); \
+	} while(0)
+
+/**
+ * siphash - compute 64-bit siphash PRF value
+ * @data: buffer to hash, must be aligned to SIPHASH_ALIGNMENT
+ * @size: size of @data
+ * @key: the siphash key
+ */
+u64 siphash(const void *data, size_t len, const siphash_key_t key)
+{
+	u64 v0 = 0x736f6d6570736575ULL;
+	u64 v1 = 0x646f72616e646f6dULL;
+	u64 v2 = 0x6c7967656e657261ULL;
+	u64 v3 = 0x7465646279746573ULL;
+	u64 b = ((u64)len) << 56;
+	u64 m;
+	const u8 *end = data + len - (len % sizeof(u64));
+	const u8 left = len & (sizeof(u64) - 1);
+	v3 ^= key[1];
+	v2 ^= key[0];
+	v1 ^= key[1];
+	v0 ^= key[0];
+	for (; data != end; data += sizeof(u64)) {
+		m = le64_to_cpup(data);
+		v3 ^= m;
+		SIPROUND;
+		SIPROUND;
+		v0 ^= m;
+	}
+#if defined(CONFIG_DCACHE_WORD_ACCESS) && BITS_PER_LONG == 64
+	if (left)
+		b |= le64_to_cpu((__force __le64)(load_unaligned_zeropad(data) &
+						  bytemask_from_count(left)));
+#else
+	switch (left) {
+	case 7: b |= ((u64)end[6]) << 48;
+	case 6: b |= ((u64)end[5]) << 40;
+	case 5: b |= ((u64)end[4]) << 32;
+	case 4: b |= le32_to_cpup(data); break;
+	case 3: b |= ((u64)end[2]) << 16;
+	case 2: b |= le16_to_cpup(data); break;
+	case 1: b |= end[0];
+	}
+#endif
+	v3 ^= b;
+	SIPROUND;
+	SIPROUND;
+	v0 ^= b;
+	v2 ^= 0xff;
+	SIPROUND;
+	SIPROUND;
+	SIPROUND;
+	SIPROUND;
+	return (v0 ^ v1) ^ (v2 ^ v3);
+}
+EXPORT_SYMBOL(siphash);
+
+#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+/**
+ * siphash - compute 64-bit siphash PRF value, without alignment requirements
+ * @data: buffer to hash
+ * @size: size of @data
+ * @key: the siphash key
+ */
+u64 siphash_unaligned(const void *data, size_t len, const siphash_key_t key)
+{
+	u64 v0 = 0x736f6d6570736575ULL;
+	u64 v1 = 0x646f72616e646f6dULL;
+	u64 v2 = 0x6c7967656e657261ULL;
+	u64 v3 = 0x7465646279746573ULL;
+	u64 b = ((u64)len) << 56;
+	u64 m;
+	const u8 *end = data + len - (len % sizeof(u64));
+	const u8 left = len & (sizeof(u64) - 1);
+	v3 ^= key[1];
+	v2 ^= key[0];
+	v1 ^= key[1];
+	v0 ^= key[0];
+	for (; data != end; data += sizeof(u64)) {
+		m = get_unaligned_le64(data);
+		v3 ^= m;
+		SIPROUND;
+		SIPROUND;
+		v0 ^= m;
+	}
+#if defined(CONFIG_DCACHE_WORD_ACCESS) && BITS_PER_LONG == 64
+	if (left)
+		b |= le64_to_cpu((__force __le64)(load_unaligned_zeropad(data) &
+						  bytemask_from_count(left)));
+#else
+	switch (left) {
+	case 7: b |= ((u64)end[6]) << 48;
+	case 6: b |= ((u64)end[5]) << 40;
+	case 5: b |= ((u64)end[4]) << 32;
+	case 4: b |= get_unaligned_le32(end); break;
+	case 3: b |= ((u64)end[2]) << 16;
+	case 2: b |= get_unaligned_le16(end); break;
+	case 1: b |= bytes[0];
+	}
+#endif
+	v3 ^= b;
+	SIPROUND;
+	SIPROUND;
+	v0 ^= b;
+	v2 ^= 0xff;
+	SIPROUND;
+	SIPROUND;
+	SIPROUND;
+	SIPROUND;
+	return (v0 ^ v1) ^ (v2 ^ v3);
+}
+EXPORT_SYMBOL(siphash_unaligned);
+#endif
diff --git a/lib/test_siphash.c b/lib/test_siphash.c
new file mode 100644
index 000000000000..93549e4e22c5
--- /dev/null
+++ b/lib/test_siphash.c
@@ -0,0 +1,83 @@
+/* Test cases for siphash.c
+ *
+ * Copyright (C) 2016 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
+ *
+ * This file is provided under a dual BSD/GPLv2 license.
+ *
+ * SipHash: a fast short-input PRF
+ * https://131002.net/siphash/
+ *
+ * This implementation is specifically for SipHash2-4.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/siphash.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+
+/* Test vectors taken from official reference source available at:
+ *     https://131002.net/siphash/siphash24.c
+ */
+static const u64 test_vectors[64] = {
+	0x726fdb47dd0e0e31ULL, 0x74f839c593dc67fdULL, 0x0d6c8009d9a94f5aULL,
+	0x85676696d7fb7e2dULL, 0xcf2794e0277187b7ULL, 0x18765564cd99a68dULL,
+	0xcbc9466e58fee3ceULL, 0xab0200f58b01d137ULL, 0x93f5f5799a932462ULL,
+	0x9e0082df0ba9e4b0ULL, 0x7a5dbbc594ddb9f3ULL, 0xf4b32f46226bada7ULL,
+	0x751e8fbc860ee5fbULL, 0x14ea5627c0843d90ULL, 0xf723ca908e7af2eeULL,
+	0xa129ca6149be45e5ULL, 0x3f2acc7f57c29bdbULL, 0x699ae9f52cbe4794ULL,
+	0x4bc1b3f0968dd39cULL, 0xbb6dc91da77961bdULL, 0xbed65cf21aa2ee98ULL,
+	0xd0f2cbb02e3b67c7ULL, 0x93536795e3a33e88ULL, 0xa80c038ccd5ccec8ULL,
+	0xb8ad50c6f649af94ULL, 0xbce192de8a85b8eaULL, 0x17d835b85bbb15f3ULL,
+	0x2f2e6163076bcfadULL, 0xde4daaaca71dc9a5ULL, 0xa6a2506687956571ULL,
+	0xad87a3535c49ef28ULL, 0x32d892fad841c342ULL, 0x7127512f72f27cceULL,
+	0xa7f32346f95978e3ULL, 0x12e0b01abb051238ULL, 0x15e034d40fa197aeULL,
+	0x314dffbe0815a3b4ULL, 0x027990f029623981ULL, 0xcadcd4e59ef40c4dULL,
+	0x9abfd8766a33735cULL, 0x0e3ea96b5304a7d0ULL, 0xad0c42d6fc585992ULL,
+	0x187306c89bc215a9ULL, 0xd4a60abcf3792b95ULL, 0xf935451de4f21df2ULL,
+	0xa9538f0419755787ULL, 0xdb9acddff56ca510ULL, 0xd06c98cd5c0975ebULL,
+	0xe612a3cb9ecba951ULL, 0xc766e62cfcadaf96ULL, 0xee64435a9752fe72ULL,
+	0xa192d576b245165aULL, 0x0a8787bf8ecb74b2ULL, 0x81b3e73d20b49b6fULL,
+	0x7fa8220ba3b2eceaULL, 0x245731c13ca42499ULL, 0xb78dbfaf3a8d83bdULL,
+	0xea1ad565322a1a0bULL, 0x60e61c23a3795013ULL, 0x6606d7e446282b93ULL,
+	0x6ca4ecb15c5f91e1ULL, 0x9f626da15c9625f3ULL, 0xe51b38608ef25f57ULL,
+	0x958a324ceb064572ULL
+};
+static const siphash_key_t test_key =
+	{ 0x0706050403020100ULL , 0x0f0e0d0c0b0a0908ULL };
+
+static int __init siphash_test_init(void)
+{
+	u8 in[64] __aligned(SIPHASH_ALIGNMENT);
+	u8 in_unaligned[65];
+	u8 i;
+	int ret = 0;
+
+	for (i = 0; i < 64; ++i) {
+		in[i] = i;
+		in_unaligned[i + 1] = i;
+		if (siphash(in, i, test_key) != test_vectors[i]) {
+			pr_info("self-test aligned %u: FAIL\n", i + 1);
+			ret = -EINVAL;
+		}
+		if (siphash_unaligned(in_unaligned + 1, i, test_key) != test_vectors[i]) {
+			pr_info("self-test unaligned %u: FAIL\n", i + 1);
+			ret = -EINVAL;
+		}
+	}
+	if (!ret)
+		pr_info("self-tests: pass\n");
+	return ret;
+}
+
+static void __exit siphash_test_exit(void)
+{
+}
+
+module_init(siphash_test_init);
+module_exit(siphash_test_exit);
+
+MODULE_AUTHOR("Jason A. Donenfeld <Jason@zx2c4.com>");
+MODULE_LICENSE("Dual BSD/GPL");
-- 
2.11.0

Re: [PATCH v5 1/4] siphash: add cryptographically secure PRF

[George Spelvin]

> While SipHash is extremely fast for a cryptographically secure function,
> it is likely a tiny bit slower than the insecure jhash, and so replacements
> will be evaluated on a case-by-case basis based on whether or not the
> difference in speed is negligible and whether or not the current jhash usage
> poses a real security risk.

To quantify that, jhash is 27 instructions per 12 bytes of input, with a
dependency path length of 13 instructions.  (24/12 in __jash_mix, plus
3/1 for adding the input to the state.) The final add + __jhash_final
is 24 instructions with a path length of 15, which is close enough for
this handwaving.  Call it 18n instructions and 8n cycles for 8n bytes.

SipHash (on a 64-bit machine) is 14 instructions with a dependency path
length of 4 *per round*.  Two rounds per 8 bytes, plus plus two adds
and one cycle per input word, plus four rounds to finish makes 30n+46
instructions and 9n+16 cycles for 8n bytes.

So *if* you have a 64-bit 4-way superscalar machine, it's not that much
slower once it gets going, but the four-round finalization is quite
noticeable for short inputs.

For typical kernel input lengths "within a factor of 2" is
probably more accurate than "a tiny bit".

You lose a factor of 2 if you machine is 2-way or non-superscalar,
and a second factor of 2 if it's a 32-bit machine.

I mention this because there are a lot of home routers and other netwoek
appliances running Linux on 32-bit ARM and MIPS processors.  For those,
it's a factor of *eight*, which is a lot more than "a tiny bit".

The real killer is if you don't have enough registers; SipHash performs
horribly on i386 because it uses more state than i386 has registers.

(If i386 performance is desired, you might ask Jean-Philippe for some
rotate constants for a 32-bit variant with 64 bits of key.  Note that
SipHash's security proof requires that key length + input length is
strictly less than the state size, so for a 4x32-bit variant, while
you could stretch the key length a little, you'd have a hard limit at
95 bits.)


A second point, the final XOR in SipHash is either a (very minor) design
mistake, or an opportunity for optimization, depending on how you look
at it.  Look at the end of the function:

>+	SIPROUND;
>+	SIPROUND;
>+	return (v0 ^ v1) ^ (v2 ^ v3);

Expanding that out, you get:
+	v0 += v1; v1 = rol64(v1, 13); v1 ^= v0; v0 = rol64(v0, 32);
+	v2 += v3; v3 = rol64(v3, 16); v3 ^= v2;
+	v0 += v3; v3 = rol64(v3, 21); v3 ^= v0;
+	v2 += v1; v1 = rol64(v1, 17); v1 ^= v2; v2 = rol64(v2, 32);
+	return v0 ^ v1 ^ v2 ^ v3;

Since the final XOR includes both v0 and v3, it's undoing the "v3 ^= v0"
two lines earlier, so the value of v0 doesn't matter after its XOR into
v1 on line one.

The final SIPROUND and return can then be optimized to

+	v0 += v1; v1 = rol64(v1, 13); v1 ^= v0;
+	v2 += v3; v3 = rol64(v3, 16); v3 ^= v2;
+	v3 = rol64(v3, 21);
+	v2 += v1; v1 = rol64(v1, 17); v1 ^= v2; v2 = rol64(v2, 32);
+	return v1 ^ v2 ^ v3;

A 32-bit implementation could further tweak the 4 instructions of
	v1 ^= v2; v2 = rol64(v2, 32); v1 ^= v2;

gcc 6.2.1 -O3 compiles it to basically:
	v1.low ^= v2.low;
	v1.high ^= v2.high;
	v1.low ^= v2.high;
	v1.high ^= v2.low;
but it could be written as:
	v2.low ^= v2.high;
	v1.low ^= v2.low;
	v1.high ^= v2.low;

Alternatively, if it's for private use only (key not shared with other
systems), a slightly stronger variant would "return v1 ^ v3;".
(The final swap of v2 is dead code, but a compiler can spot that easily.)

Re: [PATCH v5 1/4] siphash: add cryptographically secure PRF

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 1530 bytes --]

Hi Jason,

[auto build test ERROR on linus/master]
[also build test ERROR on v4.9 next-20161215]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Jason-A-Donenfeld/siphash-add-cryptographically-secure-PRF/20161216-092837
config: ia64-allmodconfig (attached as .config)
compiler: ia64-linux-gcc (GCC) 6.2.0
reproduce:
        wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        make.cross ARCH=ia64 

All errors (new ones prefixed by >>):

   lib/siphash.c: In function 'siphash_unaligned':
>> lib/siphash.c:123:15: error: 'bytes' undeclared (first use in this function)
     case 1: b |= bytes[0];
                  ^~~~~
   lib/siphash.c:123:15: note: each undeclared identifier is reported only once for each function it appears in

vim +/bytes +123 lib/siphash.c

   117		case 7: b |= ((u64)end[6]) << 48;
   118		case 6: b |= ((u64)end[5]) << 40;
   119		case 5: b |= ((u64)end[4]) << 32;
   120		case 4: b |= get_unaligned_le32(end); break;
   121		case 3: b |= ((u64)end[2]) << 16;
   122		case 2: b |= get_unaligned_le16(end); break;
 > 123		case 1: b |= bytes[0];
   124		}
   125	#endif
   126		v3 ^= b;

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 45664 bytes --]

Re: [PATCH v5 1/4] siphash: add cryptographically secure PRF

[Jeffrey Walton]

> diff --git a/lib/test_siphash.c b/lib/test_siphash.c
> new file mode 100644
> index 000000000000..93549e4e22c5
> --- /dev/null
> +++ b/lib/test_siphash.c
> @@ -0,0 +1,83 @@
> +/* Test cases for siphash.c
> + *
> + * Copyright (C) 2016 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
> + *
> + * This file is provided under a dual BSD/GPLv2 license.
> + *
> + * SipHash: a fast short-input PRF
> + * https://131002.net/siphash/
> + *
> + * This implementation is specifically for SipHash2-4.
> + */
> +
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> +#include <linux/siphash.h>
> +#include <linux/kernel.h>
> +#include <linux/string.h>
> +#include <linux/errno.h>
> +#include <linux/module.h>
> +
> +/* Test vectors taken from official reference source available at:
> + *     https://131002.net/siphash/siphash24.c
> + */
> +static const u64 test_vectors[64] = {
> +       0x726fdb47dd0e0e31ULL, 0x74f839c593dc67fdULL, 0x0d6c8009d9a94f5aULL,
> +       0x85676696d7fb7e2dULL, 0xcf2794e0277187b7ULL, 0x18765564cd99a68dULL,
> +       0xcbc9466e58fee3ceULL, 0xab0200f58b01d137ULL, 0x93f5f5799a932462ULL,
> +       0x9e0082df0ba9e4b0ULL, 0x7a5dbbc594ddb9f3ULL, 0xf4b32f46226bada7ULL,
> +       0x751e8fbc860ee5fbULL, 0x14ea5627c0843d90ULL, 0xf723ca908e7af2eeULL,
> +       0xa129ca6149be45e5ULL, 0x3f2acc7f57c29bdbULL, 0x699ae9f52cbe4794ULL,
> +       0x4bc1b3f0968dd39cULL, 0xbb6dc91da77961bdULL, 0xbed65cf21aa2ee98ULL,
> +       0xd0f2cbb02e3b67c7ULL, 0x93536795e3a33e88ULL, 0xa80c038ccd5ccec8ULL,
> +       0xb8ad50c6f649af94ULL, 0xbce192de8a85b8eaULL, 0x17d835b85bbb15f3ULL,
> +       0x2f2e6163076bcfadULL, 0xde4daaaca71dc9a5ULL, 0xa6a2506687956571ULL,
> +       0xad87a3535c49ef28ULL, 0x32d892fad841c342ULL, 0x7127512f72f27cceULL,
> +       0xa7f32346f95978e3ULL, 0x12e0b01abb051238ULL, 0x15e034d40fa197aeULL,
> +       0x314dffbe0815a3b4ULL, 0x027990f029623981ULL, 0xcadcd4e59ef40c4dULL,
> +       0x9abfd8766a33735cULL, 0x0e3ea96b5304a7d0ULL, 0xad0c42d6fc585992ULL,
> +       0x187306c89bc215a9ULL, 0xd4a60abcf3792b95ULL, 0xf935451de4f21df2ULL,
> +       0xa9538f0419755787ULL, 0xdb9acddff56ca510ULL, 0xd06c98cd5c0975ebULL,
> +       0xe612a3cb9ecba951ULL, 0xc766e62cfcadaf96ULL, 0xee64435a9752fe72ULL,
> +       0xa192d576b245165aULL, 0x0a8787bf8ecb74b2ULL, 0x81b3e73d20b49b6fULL,
> +       0x7fa8220ba3b2eceaULL, 0x245731c13ca42499ULL, 0xb78dbfaf3a8d83bdULL,
> +       0xea1ad565322a1a0bULL, 0x60e61c23a3795013ULL, 0x6606d7e446282b93ULL,
> +       0x6ca4ecb15c5f91e1ULL, 0x9f626da15c9625f3ULL, 0xe51b38608ef25f57ULL,
> +       0x958a324ceb064572ULL
> +};
> +static const siphash_key_t test_key =
> +       { 0x0706050403020100ULL , 0x0f0e0d0c0b0a0908ULL };
> +
> +static int __init siphash_test_init(void)
> +{
> +       u8 in[64] __aligned(SIPHASH_ALIGNMENT);
> +       u8 in_unaligned[65];
> +       u8 i;
> +       int ret = 0;
> +
> +       for (i = 0; i < 64; ++i) {
> +               in[i] = i;
> +               in_unaligned[i + 1] = i;
> +               if (siphash(in, i, test_key) != test_vectors[i]) {
> +                       pr_info("self-test aligned %u: FAIL\n", i + 1);
> +                       ret = -EINVAL;
> +               }
> +               if (siphash_unaligned(in_unaligned + 1, i, test_key) != test_vectors[i]) {
> +                       pr_info("self-test unaligned %u: FAIL\n", i + 1);
> +                       ret = -EINVAL;
> +               }
> +       }
> +       if (!ret)
> +               pr_info("self-tests: pass\n");
> +       return ret;
> +}
> +
> +static void __exit siphash_test_exit(void)
> +{
> +}
> +
> +module_init(siphash_test_init);
> +module_exit(siphash_test_exit);
> +
> +MODULE_AUTHOR("Jason A. Donenfeld <Jason@zx2c4.com>");
> +MODULE_LICENSE("Dual BSD/GPL");
> --
> 2.11.0
>

I believe the output of SipHash depends upon endianness. Folks who
request a digest through the af_alg interface will likely expect a
byte array.

I think that means on little endian machines, values like element 0
must be reversed byte reversed:

    0x726fdb47dd0e0e31ULL => 31,0e,0e,dd,47,db,6f,72

If I am not mistaken, that value (and other tv's) are returned here:

    return (v0 ^ v1) ^ (v2 ^ v3);

It may be prudent to include the endian reversal in the test to ensure
big endian machines produce expected results. Some closely related
testing on an old Apple PowerMac G5 revealed that result needed to be
reversed before returning it to a caller.

Jeff

Re: [PATCH v5 1/4] siphash: add cryptographically secure PRF

[Jason A. Donenfeld]

On Sat, Dec 17, 2016 at 3:55 PM, Jeffrey Walton <noloader@gmail.com> wrote:
> It may be prudent to include the endian reversal in the test to ensure
> big endian machines produce expected results. Some closely related
> testing on an old Apple PowerMac G5 revealed that result needed to be
> reversed before returning it to a caller.

The function [1] returns a u64. Originally I had it returning a
__le64, but that was considered unnecessary by many prior reviewers on
the list. It returns an integer. If you want uniform bytes out of it,
then use the endian conversion function, the same as you would do with
any other type of integer.

Additionally, this function is *not* meant for af_alg or any of the
crypto/* code. It's very unlikely to find a use there.


> Forgive my ignorance... I did not find reading on using the primitive
> in a PRNG. Does anyone know what Aumasson or Bernstein have to say?
> Aumasson's site does not seem to discuss the use case:

He's on this thread so I suppose he can speak up for himself. But in
my conversations with him, the primary take-away was, "seems okay to
me!". But please -- JP - correct me if I've misinterpreted.

[PATCH v5 2/4] siphash: add Nu{32,64} helpers

[Jason A. Donenfeld]

These restore parity with the jhash interface by providing high
performance helpers for common input sizes.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Tom Herbert <tom@herbertland.com>
---
 include/linux/siphash.h |  33 ++++++++++
 lib/siphash.c           | 157 +++++++++++++++++++++++++++++++++++++-----------
 lib/test_siphash.c      |  18 ++++++
 3 files changed, 172 insertions(+), 36 deletions(-)

diff --git a/include/linux/siphash.h b/include/linux/siphash.h
index 145cf5667078..6f5a08a0fc7e 100644
--- a/include/linux/siphash.h
+++ b/include/linux/siphash.h
@@ -29,4 +29,37 @@ static inline u64 siphash_unaligned(const void *data, size_t len,
 u64 siphash_unaligned(const void *data, size_t len, const siphash_key_t key);
 #endif
 
+u64 siphash_1u64(const u64 a, const siphash_key_t key);
+u64 siphash_2u64(const u64 a, const u64 b, const siphash_key_t key);
+u64 siphash_3u64(const u64 a, const u64 b, const u64 c,
+		 const siphash_key_t key);
+u64 siphash_4u64(const u64 a, const u64 b, const u64 c, const u64 d,
+		 const siphash_key_t key);
+
+static inline u64 siphash_2u32(const u32 a, const u32 b, const siphash_key_t key)
+{
+	return siphash_1u64((u64)b << 32 | a, key);
+}
+
+static inline u64 siphash_4u32(const u32 a, const u32 b, const u32 c, const u32 d,
+			       const siphash_key_t key)
+{
+	return siphash_2u64((u64)b << 32 | a, (u64)d << 32 | c, key);
+}
+
+static inline u64 siphash_6u32(const u32 a, const u32 b, const u32 c, const u32 d,
+			       const u32 e, const u32 f, const siphash_key_t key)
+{
+	return siphash_3u64((u64)b << 32 | a, (u64)d << 32 | c, (u64)f << 32 | e,
+			    key);
+}
+
+static inline u64 siphash_8u32(const u32 a, const u32 b, const u32 c, const u32 d,
+			       const u32 e, const u32 f, const u32 g, const u32 h,
+			       const siphash_key_t key)
+{
+	return siphash_4u64((u64)b << 32 | a, (u64)d << 32 | c, (u64)f << 32 | e,
+			    (u64)h << 32 | g, key);
+}
+
 #endif /* _LINUX_SIPHASH_H */
diff --git a/lib/siphash.c b/lib/siphash.c
index afc13cbb1b78..970c083ab06a 100644
--- a/lib/siphash.c
+++ b/lib/siphash.c
@@ -25,6 +25,29 @@
 	v2 += v1; v1 = rol64(v1, 17); v1 ^= v2; v2 = rol64(v2, 32); \
 	} while(0)
 
+#define PREAMBLE(len) \
+	u64 v0 = 0x736f6d6570736575ULL; \
+	u64 v1 = 0x646f72616e646f6dULL; \
+	u64 v2 = 0x6c7967656e657261ULL; \
+	u64 v3 = 0x7465646279746573ULL; \
+	u64 b = ((u64)len) << 56; \
+	v3 ^= key[1]; \
+	v2 ^= key[0]; \
+	v1 ^= key[1]; \
+	v0 ^= key[0];
+
+#define POSTAMBLE \
+	v3 ^= b; \
+	SIPROUND; \
+	SIPROUND; \
+	v0 ^= b; \
+	v2 ^= 0xff; \
+	SIPROUND; \
+	SIPROUND; \
+	SIPROUND; \
+	SIPROUND; \
+	return (v0 ^ v1) ^ (v2 ^ v3);
+
 /**
  * siphash - compute 64-bit siphash PRF value
  * @data: buffer to hash, must be aligned to SIPHASH_ALIGNMENT
@@ -33,18 +56,10 @@
  */
 u64 siphash(const void *data, size_t len, const siphash_key_t key)
 {
-	u64 v0 = 0x736f6d6570736575ULL;
-	u64 v1 = 0x646f72616e646f6dULL;
-	u64 v2 = 0x6c7967656e657261ULL;
-	u64 v3 = 0x7465646279746573ULL;
-	u64 b = ((u64)len) << 56;
-	u64 m;
 	const u8 *end = data + len - (len % sizeof(u64));
 	const u8 left = len & (sizeof(u64) - 1);
-	v3 ^= key[1];
-	v2 ^= key[0];
-	v1 ^= key[1];
-	v0 ^= key[0];
+	u64 m;
+	PREAMBLE(len)
 	for (; data != end; data += sizeof(u64)) {
 		m = le64_to_cpup(data);
 		v3 ^= m;
@@ -67,16 +82,7 @@ u64 siphash(const void *data, size_t len, const siphash_key_t key)
 	case 1: b |= end[0];
 	}
 #endif
-	v3 ^= b;
-	SIPROUND;
-	SIPROUND;
-	v0 ^= b;
-	v2 ^= 0xff;
-	SIPROUND;
-	SIPROUND;
-	SIPROUND;
-	SIPROUND;
-	return (v0 ^ v1) ^ (v2 ^ v3);
+	POSTAMBLE
 }
 EXPORT_SYMBOL(siphash);
 
@@ -89,18 +95,10 @@ EXPORT_SYMBOL(siphash);
  */
 u64 siphash_unaligned(const void *data, size_t len, const siphash_key_t key)
 {
-	u64 v0 = 0x736f6d6570736575ULL;
-	u64 v1 = 0x646f72616e646f6dULL;
-	u64 v2 = 0x6c7967656e657261ULL;
-	u64 v3 = 0x7465646279746573ULL;
-	u64 b = ((u64)len) << 56;
-	u64 m;
 	const u8 *end = data + len - (len % sizeof(u64));
 	const u8 left = len & (sizeof(u64) - 1);
-	v3 ^= key[1];
-	v2 ^= key[0];
-	v1 ^= key[1];
-	v0 ^= key[0];
+	u64 m;
+	PREAMBLE(len)
 	for (; data != end; data += sizeof(u64)) {
 		m = get_unaligned_le64(data);
 		v3 ^= m;
@@ -123,16 +121,103 @@ u64 siphash_unaligned(const void *data, size_t len, const siphash_key_t key)
 	case 1: b |= bytes[0];
 	}
 #endif
-	v3 ^= b;
+	POSTAMBLE
+}
+EXPORT_SYMBOL(siphash_unaligned);
+#endif
+
+/**
+ * siphash_1u64 - compute 64-bit siphash PRF value of a u64
+ * @first: first u64
+ * @key: the siphash key
+ */
+u64 siphash_1u64(const u64 first, const siphash_key_t key)
+{
+	PREAMBLE(8)
+	v3 ^= first;
+	SIPROUND;
+	SIPROUND;
+	v0 ^= first;
+	POSTAMBLE
+}
+EXPORT_SYMBOL(siphash_1u64);
+
+/**
+ * siphash_2u64 - compute 64-bit siphash PRF value of 2 u64
+ * @first: first u64
+ * @second: second u64
+ * @key: the siphash key
+ */
+u64 siphash_2u64(const u64 first, const u64 second, const siphash_key_t key)
+{
+	PREAMBLE(16)
+	v3 ^= first;
 	SIPROUND;
 	SIPROUND;
-	v0 ^= b;
-	v2 ^= 0xff;
+	v0 ^= first;
+	v3 ^= second;
 	SIPROUND;
 	SIPROUND;
+	v0 ^= second;
+	POSTAMBLE
+}
+EXPORT_SYMBOL(siphash_2u64);
+
+/**
+ * siphash_3u64 - compute 64-bit siphash PRF value of 3 u64
+ * @first: first u64
+ * @second: second u64
+ * @third: third u64
+ * @key: the siphash key
+ */
+u64 siphash_3u64(const u64 first, const u64 second, const u64 third,
+		 const siphash_key_t key)
+{
+	PREAMBLE(24)
+	v3 ^= first;
 	SIPROUND;
 	SIPROUND;
-	return (v0 ^ v1) ^ (v2 ^ v3);
+	v0 ^= first;
+	v3 ^= second;
+	SIPROUND;
+	SIPROUND;
+	v0 ^= second;
+	v3 ^= third;
+	SIPROUND;
+	SIPROUND;
+	v0 ^= third;
+	POSTAMBLE
 }
-EXPORT_SYMBOL(siphash_unaligned);
-#endif
+EXPORT_SYMBOL(siphash_3u64);
+
+/**
+ * siphash_4u64 - compute 64-bit siphash PRF value of 4 u64
+ * @first: first u64
+ * @second: second u64
+ * @third: third u64
+ * @forth: forth u64
+ * @key: the siphash key
+ */
+u64 siphash_4u64(const u64 first, const u64 second, const u64 third,
+		 const u64 forth, const siphash_key_t key)
+{
+	PREAMBLE(32)
+	v3 ^= first;
+	SIPROUND;
+	SIPROUND;
+	v0 ^= first;
+	v3 ^= second;
+	SIPROUND;
+	SIPROUND;
+	v0 ^= second;
+	v3 ^= third;
+	SIPROUND;
+	SIPROUND;
+	v0 ^= third;
+	v3 ^= forth;
+	SIPROUND;
+	SIPROUND;
+	v0 ^= forth;
+	POSTAMBLE
+}
+EXPORT_SYMBOL(siphash_4u64);
diff --git a/lib/test_siphash.c b/lib/test_siphash.c
index 93549e4e22c5..1635189c171f 100644
--- a/lib/test_siphash.c
+++ b/lib/test_siphash.c
@@ -67,6 +67,24 @@ static int __init siphash_test_init(void)
 			ret = -EINVAL;
 		}
 	}
+	if (siphash_1u64(0x0706050403020100ULL, test_key) != test_vectors[8]) {
+		pr_info("self-test 1u64: FAIL\n");
+		ret = -EINVAL;
+	}
+	if (siphash_2u64(0x0706050403020100ULL, 0x0f0e0d0c0b0a0908ULL, test_key) != test_vectors[16]) {
+		pr_info("self-test 2u64: FAIL\n");
+		ret = -EINVAL;
+	}
+	if (siphash_3u64(0x0706050403020100ULL, 0x0f0e0d0c0b0a0908ULL,
+			 0x1716151413121110ULL, test_key) != test_vectors[24]) {
+		pr_info("self-test 3u64: FAIL\n");
+		ret = -EINVAL;
+	}
+	if (siphash_4u64(0x0706050403020100ULL, 0x0f0e0d0c0b0a0908ULL,
+			 0x1716151413121110ULL, 0x1f1e1d1c1b1a1918ULL, test_key) != test_vectors[32]) {
+		pr_info("self-test 4u64: FAIL\n");
+		ret = -EINVAL;
+	}
 	if (!ret)
 		pr_info("self-tests: pass\n");
 	return ret;
-- 
2.11.0

RE: [PATCH v5 2/4] siphash: add Nu{32,64} helpers

[David Laight]

From: Jason A. Donenfeld
> Sent: 15 December 2016 20:30
> These restore parity with the jhash interface by providing high
> performance helpers for common input sizes.
...
> +#define PREAMBLE(len) \
> +	u64 v0 = 0x736f6d6570736575ULL; \
> +	u64 v1 = 0x646f72616e646f6dULL; \
> +	u64 v2 = 0x6c7967656e657261ULL; \
> +	u64 v3 = 0x7465646279746573ULL; \
> +	u64 b = ((u64)len) << 56; \
> +	v3 ^= key[1]; \
> +	v2 ^= key[0]; \
> +	v1 ^= key[1]; \
> +	v0 ^= key[0];

Isn't that equivalent to:
	v0 = key[0];
	v1 = key[1];
	v2 = key[0] ^ (0x736f6d6570736575ULL ^ 0x646f72616e646f6dULL);
	v3 = key[1] ^ (0x646f72616e646f6dULL ^ 0x7465646279746573ULL);

Those constants also look like ASCII strings.
What cryptographic analysis has been done on the values?

	David

RE: [PATCH v5 2/4] siphash: add Nu{32,64} helpers

[George Spelvin]

Jason A. Donenfeld wrote:
> Isn't that equivalent to:
>	v0 = key[0];
>	v1 = key[1];
>	v2 = key[0] ^ (0x736f6d6570736575ULL ^ 0x646f72616e646f6dULL);
>	v3 = key[1] ^ (0x646f72616e646f6dULL ^ 0x7465646279746573ULL);

(Pre-XORing key[] with the first two constants which, if the constants
are random in the first place, can be a no-op.)  Other than the typo
in the v2 line, yes.  If they key is non-public, then you can xor an
arbitrary constant in to both halves to slightly speed up the startup.

(Nits: There's a typo in the v2 line, you don't need to parenthesize
associative operators like xor, and the "ull" suffix is redundant here.)

> Those constants also look like ASCII strings.

They are.  The ASCII is "somepseudorandomlygeneratedbytes".

> What cryptographic analysis has been done on the values?

They're "nothing up my sleeve numbers".

They're arbitrary numbers, and almost any other values would do exactly
as well.  The main properties are:

1) They're different (particulatly v0 != v2 and v1 != v3), and
2) Neither they, nor their xor, is rotationally symmetric like 0x55555555.
   (Because SipHash is mostly rotationally symmetric, broken only by the
   interruption of the carry chain at the msbit, it helps slightly
   to break this up at the beginning.)

Those exact values only matter for portability.  If you don't need anyone
else to be able to compute matching outputs, then you could use any other
convenient constants (like the MD5 round constants).

[PATCH v5 3/4] secure_seq: use SipHash in place of MD5

[Jason A. Donenfeld]

This gives a clear speed and security improvement. Siphash is both
faster and is more solid crypto than the aging MD5.

Rather than manually filling MD5 buffers, for IPv6, we simply create
a layout by a simple anonymous struct, for which gcc generates
rather efficient code. For IPv4, we pass the values directly to the
short input convenience functions.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Miller <davem@davemloft.net>
Cc: David Laight <David.Laight@aculab.com>
Cc: Tom Herbert <tom@herbertland.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
---
 net/core/secure_seq.c | 133 ++++++++++++++++++++------------------------------
 1 file changed, 52 insertions(+), 81 deletions(-)

diff --git a/net/core/secure_seq.c b/net/core/secure_seq.c
index 88a8e429fc3e..c80583bf3213 100644
--- a/net/core/secure_seq.c
+++ b/net/core/secure_seq.c
@@ -1,3 +1,5 @@
+/* Copyright (C) 2016 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved. */
+
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/cryptohash.h>
@@ -8,14 +10,14 @@
 #include <linux/ktime.h>
 #include <linux/string.h>
 #include <linux/net.h>
-
+#include <linux/siphash.h>
 #include <net/secure_seq.h>
 
 #if IS_ENABLED(CONFIG_IPV6) || IS_ENABLED(CONFIG_INET)
+#include <linux/in6.h>
 #include <net/tcp.h>
-#define NET_SECRET_SIZE (MD5_MESSAGE_BYTES / 4)
 
-static u32 net_secret[NET_SECRET_SIZE] ____cacheline_aligned;
+static siphash_key_t net_secret;
 
 static __always_inline void net_secret_init(void)
 {
@@ -44,44 +46,42 @@ static u32 seq_scale(u32 seq)
 u32 secure_tcpv6_sequence_number(const __be32 *saddr, const __be32 *daddr,
 				 __be16 sport, __be16 dport, u32 *tsoff)
 {
-	u32 secret[MD5_MESSAGE_BYTES / 4];
-	u32 hash[MD5_DIGEST_WORDS];
-	u32 i;
-
+	const struct {
+		struct in6_addr saddr;
+		struct in6_addr daddr;
+		__be16 sport;
+		__be16 dport;
+		u32 padding;
+	} __aligned(SIPHASH_ALIGNMENT) combined = {
+		.saddr = *(struct in6_addr *)saddr,
+		.daddr = *(struct in6_addr *)daddr,
+		.sport = sport,
+		.dport = dport
+	};
+	u64 hash;
 	net_secret_init();
-	memcpy(hash, saddr, 16);
-	for (i = 0; i < 4; i++)
-		secret[i] = net_secret[i] + (__force u32)daddr[i];
-	secret[4] = net_secret[4] +
-		(((__force u16)sport << 16) + (__force u16)dport);
-	for (i = 5; i < MD5_MESSAGE_BYTES / 4; i++)
-		secret[i] = net_secret[i];
-
-	md5_transform(hash, secret);
-
-	*tsoff = sysctl_tcp_timestamps == 1 ? hash[1] : 0;
-	return seq_scale(hash[0]);
+	hash = siphash(&combined, sizeof(combined), net_secret);
+	*tsoff = sysctl_tcp_timestamps == 1 ? (hash >> 32) : 0;
+	return seq_scale(hash);
 }
 EXPORT_SYMBOL(secure_tcpv6_sequence_number);
 
 u32 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr,
 			       __be16 dport)
 {
-	u32 secret[MD5_MESSAGE_BYTES / 4];
-	u32 hash[MD5_DIGEST_WORDS];
-	u32 i;
-
+	const struct {
+		struct in6_addr saddr;
+		struct in6_addr daddr;
+		__be16 dport;
+		u16 padding1;
+		u32 padding2;
+	} __aligned(SIPHASH_ALIGNMENT) combined = {
+		.saddr = *(struct in6_addr *)saddr,
+		.daddr = *(struct in6_addr *)daddr,
+		.dport = dport
+	};
 	net_secret_init();
-	memcpy(hash, saddr, 16);
-	for (i = 0; i < 4; i++)
-		secret[i] = net_secret[i] + (__force u32) daddr[i];
-	secret[4] = net_secret[4] + (__force u32)dport;
-	for (i = 5; i < MD5_MESSAGE_BYTES / 4; i++)
-		secret[i] = net_secret[i];
-
-	md5_transform(hash, secret);
-
-	return hash[0];
+	return siphash(&combined, sizeof(combined), net_secret);
 }
 EXPORT_SYMBOL(secure_ipv6_port_ephemeral);
 #endif
@@ -91,33 +91,17 @@ EXPORT_SYMBOL(secure_ipv6_port_ephemeral);
 u32 secure_tcp_sequence_number(__be32 saddr, __be32 daddr,
 			       __be16 sport, __be16 dport, u32 *tsoff)
 {
-	u32 hash[MD5_DIGEST_WORDS];
-
+	u64 hash;
 	net_secret_init();
-	hash[0] = (__force u32)saddr;
-	hash[1] = (__force u32)daddr;
-	hash[2] = ((__force u16)sport << 16) + (__force u16)dport;
-	hash[3] = net_secret[15];
-
-	md5_transform(hash, net_secret);
-
-	*tsoff = sysctl_tcp_timestamps == 1 ? hash[1] : 0;
-	return seq_scale(hash[0]);
+	hash = siphash_4u32(saddr, daddr, sport, dport, net_secret);
+	*tsoff = sysctl_tcp_timestamps == 1 ? (hash >> 32) : 0;
+	return seq_scale(hash);
 }
 
 u32 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport)
 {
-	u32 hash[MD5_DIGEST_WORDS];
-
 	net_secret_init();
-	hash[0] = (__force u32)saddr;
-	hash[1] = (__force u32)daddr;
-	hash[2] = (__force u32)dport ^ net_secret[14];
-	hash[3] = net_secret[15];
-
-	md5_transform(hash, net_secret);
-
-	return hash[0];
+	return siphash_4u32(saddr, daddr, dport, 0, net_secret);
 }
 EXPORT_SYMBOL_GPL(secure_ipv4_port_ephemeral);
 #endif
@@ -126,21 +110,11 @@ EXPORT_SYMBOL_GPL(secure_ipv4_port_ephemeral);
 u64 secure_dccp_sequence_number(__be32 saddr, __be32 daddr,
 				__be16 sport, __be16 dport)
 {
-	u32 hash[MD5_DIGEST_WORDS];
 	u64 seq;
-
 	net_secret_init();
-	hash[0] = (__force u32)saddr;
-	hash[1] = (__force u32)daddr;
-	hash[2] = ((__force u16)sport << 16) + (__force u16)dport;
-	hash[3] = net_secret[15];
-
-	md5_transform(hash, net_secret);
-
-	seq = hash[0] | (((u64)hash[1]) << 32);
+	seq = siphash_4u32(saddr, daddr, sport, dport, net_secret);
 	seq += ktime_get_real_ns();
 	seq &= (1ull << 48) - 1;
-
 	return seq;
 }
 EXPORT_SYMBOL(secure_dccp_sequence_number);
@@ -149,26 +123,23 @@ EXPORT_SYMBOL(secure_dccp_sequence_number);
 u64 secure_dccpv6_sequence_number(__be32 *saddr, __be32 *daddr,
 				  __be16 sport, __be16 dport)
 {
-	u32 secret[MD5_MESSAGE_BYTES / 4];
-	u32 hash[MD5_DIGEST_WORDS];
+	const struct {
+		struct in6_addr saddr;
+		struct in6_addr daddr;
+		__be16 sport;
+		__be16 dport;
+		u32 padding;
+	} __aligned(SIPHASH_ALIGNMENT) combined = {
+		.saddr = *(struct in6_addr *)saddr,
+		.daddr = *(struct in6_addr *)daddr,
+		.sport = sport,
+		.dport = dport
+	};
 	u64 seq;
-	u32 i;
-
 	net_secret_init();
-	memcpy(hash, saddr, 16);
-	for (i = 0; i < 4; i++)
-		secret[i] = net_secret[i] + (__force u32)daddr[i];
-	secret[4] = net_secret[4] +
-		(((__force u16)sport << 16) + (__force u16)dport);
-	for (i = 5; i < MD5_MESSAGE_BYTES / 4; i++)
-		secret[i] = net_secret[i];
-
-	md5_transform(hash, secret);
-
-	seq = hash[0] | (((u64)hash[1]) << 32);
+	seq = siphash(&combined, sizeof(combined), net_secret);
 	seq += ktime_get_real_ns();
 	seq &= (1ull << 48) - 1;
-
 	return seq;
 }
 EXPORT_SYMBOL(secure_dccpv6_sequence_number);
-- 
2.11.0

RE: [PATCH v5 3/4] secure_seq: use SipHash in place of MD5

[David Laight]

From: Jason A. Donenfeld
> Sent: 15 December 2016 20:30
> This gives a clear speed and security improvement. Siphash is both
> faster and is more solid crypto than the aging MD5.
> 
> Rather than manually filling MD5 buffers, for IPv6, we simply create
> a layout by a simple anonymous struct, for which gcc generates
> rather efficient code. For IPv4, we pass the values directly to the
> short input convenience functions.
...
> diff --git a/net/core/secure_seq.c b/net/core/secure_seq.c
> index 88a8e429fc3e..c80583bf3213 100644
...
> +	const struct {
> +		struct in6_addr saddr;
> +		struct in6_addr daddr;
> +		__be16 sport;
> +		__be16 dport;
> +		u32 padding;
> +	} __aligned(SIPHASH_ALIGNMENT) combined = {
> +		.saddr = *(struct in6_addr *)saddr,
> +		.daddr = *(struct in6_addr *)daddr,
> +		.sport = sport,
> +		.dport = dport
> +	};

I think you should explicitly initialise the 'padding'.
It can do no harm and makes it obvious that it is necessary.

You are still putting over-aligned data on stack.
You only need to align it to the alignment of u64 (not the size of u64).
If an on-stack item has a stronger alignment requirement than the stack
the gcc has to generate two stack frames for the function.

If you assign to each field (instead of using initialisers) then you
can get the alignment by making the first member an anonymous union
of in6_addr and u64.

Oh - and wait a bit longer between revisions.

	David

Re: [PATCH v5 3/4] secure_seq: use SipHash in place of MD5

[Jason A. Donenfeld]

Hi David,

On Fri, Dec 16, 2016 at 10:59 AM, David Laight <David.Laight@aculab.com> wrote:
> You are still putting over-aligned data on stack.
> You only need to align it to the alignment of u64 (not the size of u64).
> If an on-stack item has a stronger alignment requirement than the stack
> the gcc has to generate two stack frames for the function.

Yesterday, folks were saying that sometimes 32-bit platforms need
8-byte alignment for certain 64-bit operations, so I shouldn't fall
back to 4-byte alignment there. But actually, looking at this more
closely, I can just make SIPHASH_ALIGNMENT == __alignof__(u64), which
will take care of all possible concerns, since gcc knows best which
platforms need what alignment. Thanks for making this clear to me with
"the alignment of u64 (not the size of u64)".

> Oh - and wait a bit longer between revisions.

Okay. We can be turtles.

Jason

[PATCH v5 4/4] random: use SipHash in place of MD5

[Jason A. Donenfeld]

This duplicates the current algorithm for get_random_int/long, but uses
siphash instead. This comes with several benefits. It's certainly
faster and more cryptographically secure than MD5. This patch also
separates hashed fields into three values instead of one, in order to
increase diffusion.

The previous MD5 algorithm used a per-cpu MD5 state, which caused
successive calls to the function to chain upon each other. While it's
not entirely clear that this kind of chaining is absolutely necessary
when using a secure PRF like siphash, it can't hurt, and the timing of
the call chain does add a degree of natural entropy. So, in keeping with
this design, instead of the massive per-cpu 64-byte MD5 state, there is
instead a per-cpu previously returned value for chaining.

The speed benefits are substantial:

                | siphash | md5    | speedup |
		------------------------------
get_random_long | 137130  | 415983 | 3.03x   |
get_random_int  | 86384   | 343323 | 3.97x   |

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Jean-Philippe Aumasson <jeanphilippe.aumasson@gmail.com>
Cc: Ted Tso <tytso@mit.edu>
---
 drivers/char/random.c | 32 +++++++++++++-------------------
 1 file changed, 13 insertions(+), 19 deletions(-)

diff --git a/drivers/char/random.c b/drivers/char/random.c
index d6876d506220..a51f0ff43f00 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -262,6 +262,7 @@
 #include <linux/syscalls.h>
 #include <linux/completion.h>
 #include <linux/uuid.h>
+#include <linux/siphash.h>
 #include <crypto/chacha20.h>
 
 #include <asm/processor.h>
@@ -2042,7 +2043,7 @@ struct ctl_table random_table[] = {
 };
 #endif 	/* CONFIG_SYSCTL */
 
-static u32 random_int_secret[MD5_MESSAGE_BYTES / 4] ____cacheline_aligned;
+static siphash_key_t random_int_secret;
 
 int random_int_secret_init(void)
 {
@@ -2050,8 +2051,7 @@ int random_int_secret_init(void)
 	return 0;
 }
 
-static DEFINE_PER_CPU(__u32 [MD5_DIGEST_WORDS], get_random_int_hash)
-		__aligned(sizeof(unsigned long));
+static DEFINE_PER_CPU(u64, get_random_int_chaining);
 
 /*
  * Get a random word for internal kernel use only. Similar to urandom but
@@ -2061,19 +2061,16 @@ static DEFINE_PER_CPU(__u32 [MD5_DIGEST_WORDS], get_random_int_hash)
  */
 unsigned int get_random_int(void)
 {
-	__u32 *hash;
 	unsigned int ret;
+	u64 *chaining;
 
 	if (arch_get_random_int(&ret))
 		return ret;
 
-	hash = get_cpu_var(get_random_int_hash);
-
-	hash[0] += current->pid + jiffies + random_get_entropy();
-	md5_transform(hash, random_int_secret);
-	ret = hash[0];
-	put_cpu_var(get_random_int_hash);
-
+	chaining = &get_cpu_var(get_random_int_chaining);
+	ret = *chaining = siphash_3u64(*chaining, jiffies, random_get_entropy() +
+				       current->pid, random_int_secret);
+	put_cpu_var(get_random_int_chaining);
 	return ret;
 }
 EXPORT_SYMBOL(get_random_int);
@@ -2083,19 +2080,16 @@ EXPORT_SYMBOL(get_random_int);
  */
 unsigned long get_random_long(void)
 {
-	__u32 *hash;
 	unsigned long ret;
+	u64 *chaining;
 
 	if (arch_get_random_long(&ret))
 		return ret;
 
-	hash = get_cpu_var(get_random_int_hash);
-
-	hash[0] += current->pid + jiffies + random_get_entropy();
-	md5_transform(hash, random_int_secret);
-	ret = *(unsigned long *)hash;
-	put_cpu_var(get_random_int_hash);
-
+	chaining = &get_cpu_var(get_random_int_chaining);
+	ret = *chaining = siphash_3u64(*chaining, jiffies, random_get_entropy() +
+				       current->pid, random_int_secret);
+	put_cpu_var(get_random_int_chaining);
 	return ret;
 }
 EXPORT_SYMBOL(get_random_long);
-- 
2.11.0

[PATCH v6 0/5] The SipHash Patchset

[Jason A. Donenfeld]

Hey again,

This keeps getting more ambitious, which is good I suppose. If the frequency
of new versioned patchsets is too high for LKML and not customary, please let
me know. Otherwise, read on to see what's new this time...

With Hannes' suggestion, there is now only one siphash() function, which will
use the faster aligned version by compile-time constant folding. Additionally,
I now use constant folding to optionally switch to the helper siphash_Nu64
functions that are a bit faster for data of length 8, 16, 24, and 32. So, the
result is that you use siphash(data, len, key) if you have a buffer of sorts,
and then everything is taken care of for you. Or, if you have a series of
integers, you can opt to use siphash_Nu{32,64} functions instead. The basic
API is now complete.

After replacing MD5 in secure sequence number generation and the RNG, it
turned out that md5_transform wasn't used any place else in the tree, so
finally -- this is something to rejoice over -- lib/md5.c has been deleted and
now that function lives as a static function in crypto/md5.c where it belongs.

Meanwhile, it seems that sha_transform is used in places where SipHash would
be more fitting, so the IPv4 and IPv6 syncookies implementation now uses
SipHash, which should speed up TCP performance. Some BSDs already do this.

I'd like to replace sha_transform in addrconf, but that code is a bit gnarley,
so I don't want to be too meddlesome. I'm not entirely convinced either that
SipHash is a good choice for it. But I'm open to discussion here, so if you
have an opinion, please speak up.

If you've been following the evolution of this patchset, and think that
certain patches in it are fine, please do lend me your Reviewed-by to carry
into any subsequent versions, so that in case you disappear your useful
reviews will still keep the ball moving.

Thanks for all the great feedback thus far.

Jason

Jason A. Donenfeld (5):
  siphash: add cryptographically secure PRF
  secure_seq: use SipHash in place of MD5
  random: use SipHash in place of MD5
  md5: remove from lib and only live in crypto
  syncookies: use SipHash in place of SHA1

 MAINTAINERS             |   7 ++
 crypto/md5.c            |  95 +++++++++++++++++++++-
 drivers/char/random.c   |  32 +++-----
 include/linux/siphash.h |  86 ++++++++++++++++++++
 lib/Kconfig.debug       |   6 +-
 lib/Makefile            |   7 +-
 lib/md5.c               |  95 ----------------------
 lib/siphash.c           | 210 ++++++++++++++++++++++++++++++++++++++++++++++++
 lib/test_siphash.c      | 101 +++++++++++++++++++++++
 net/core/secure_seq.c   | 133 ++++++++++++------------------
 net/ipv4/syncookies.c   |  20 +----
 net/ipv6/syncookies.c   |  37 ++++-----
 12 files changed, 590 insertions(+), 239 deletions(-)
 create mode 100644 include/linux/siphash.h
 delete mode 100644 lib/md5.c
 create mode 100644 lib/siphash.c
 create mode 100644 lib/test_siphash.c

-- 
2.11.0

[PATCH v6 1/5] siphash: add cryptographically secure PRF

[Jason A. Donenfeld]

SipHash is a 64-bit keyed hash function that is actually a
cryptographically secure PRF, like HMAC. Except SipHash is super fast,
and is meant to be used as a hashtable keyed lookup function, or as a
general PRF for short input use cases, such as sequence numbers or RNG
chaining.

For the first usage:

There are a variety of attacks known as "hashtable poisoning" in which an
attacker forms some data such that the hash of that data will be the
same, and then preceeds to fill up all entries of a hashbucket. This is
a realistic and well-known denial-of-service vector. Currently
hashtables use jhash, which is fast but not secure, and some kind of
rotating key scheme (or none at all, which isn't good). SipHash is meant
as a replacement for jhash in these cases.

There are a modicum of places in the kernel that are vulnerable to
hashtable poisoning attacks, either via userspace vectors or network
vectors, and there's not a reliable mechanism inside the kernel at the
moment to fix it. The first step toward fixing these issues is actually
getting a secure primitive into the kernel for developers to use. Then
we can, bit by bit, port things over to it as deemed appropriate.

While SipHash is extremely fast for a cryptographically secure function,
it is likely a bit slower than the insecure jhash, and so replacements
will be evaluated on a case-by-case basis based on whether or not the
difference in speed is negligible and whether or not the current jhash usage
poses a real security risk.

For the second usage:

A few places in the kernel are using MD5 or SHA1 for creating secure
sequence numbers, syn cookies, port numbers, or fast random numbers.
SipHash is a faster and more fitting, and more secure replacement for MD5
in those situations. Replacing MD5 and SHA1 with SipHash for these uses is
obvious and straight-forward, and so is submitted along with this patch
series. There shouldn't be much of a debate over its efficacy.

Dozens of languages are already using this internally for their hash
tables and PRFs. Some of the BSDs already use this in their kernels.
SipHash is a widely known high-speed solution to a widely known set of
problems, and it's time we catch-up.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Jean-Philippe Aumasson <jeanphilippe.aumasson@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: David Laight <David.Laight@aculab.com>
---
 MAINTAINERS             |   7 ++
 include/linux/siphash.h |  86 ++++++++++++++++++++
 lib/Kconfig.debug       |   6 +-
 lib/Makefile            |   5 +-
 lib/siphash.c           | 210 ++++++++++++++++++++++++++++++++++++++++++++++++
 lib/test_siphash.c      | 101 +++++++++++++++++++++++
 6 files changed, 410 insertions(+), 5 deletions(-)
 create mode 100644 include/linux/siphash.h
 create mode 100644 lib/siphash.c
 create mode 100644 lib/test_siphash.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 59c9895d73d5..5d87a8c1056a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11231,6 +11231,13 @@ F:	arch/arm/mach-s3c24xx/mach-bast.c
 F:	arch/arm/mach-s3c24xx/bast-ide.c
 F:	arch/arm/mach-s3c24xx/bast-irq.c
 
+SIPHASH PRF ROUTINES
+M:	Jason A. Donenfeld <Jason@zx2c4.com>
+S:	Maintained
+F:	lib/siphash.c
+F:	lib/test_siphash.c
+F:	include/linux/siphash.h
+
 TI DAVINCI MACHINE SUPPORT
 M:	Sekhar Nori <nsekhar@ti.com>
 M:	Kevin Hilman <khilman@kernel.org>
diff --git a/include/linux/siphash.h b/include/linux/siphash.h
new file mode 100644
index 000000000000..e82fce48a0f6
--- /dev/null
+++ b/include/linux/siphash.h
@@ -0,0 +1,86 @@
+/* Copyright (C) 2016 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
+ *
+ * This file is provided under a dual BSD/GPLv2 license.
+ *
+ * SipHash: a fast short-input PRF
+ * https://131002.net/siphash/
+ *
+ * This implementation is specifically for SipHash2-4.
+ */
+
+#ifndef _LINUX_SIPHASH_H
+#define _LINUX_SIPHASH_H
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#define SIPHASH_ALIGNMENT 8
+typedef u64 siphash_key_t[2];
+
+u64 __siphash_aligned(const void *data, size_t len, const siphash_key_t key);
+#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+u64 __siphash_unaligned(const void *data, size_t len, const siphash_key_t key);
+#endif
+
+u64 siphash_1u64(const u64 a, const siphash_key_t key);
+u64 siphash_2u64(const u64 a, const u64 b, const siphash_key_t key);
+u64 siphash_3u64(const u64 a, const u64 b, const u64 c,
+		 const siphash_key_t key);
+u64 siphash_4u64(const u64 a, const u64 b, const u64 c, const u64 d,
+		 const siphash_key_t key);
+
+static inline u64 ___siphash_aligned(const u64 *data, size_t len, const siphash_key_t key)
+{
+	if (__builtin_constant_p(len) && len == 8)
+		return siphash_1u64(data[0], key);
+	if (__builtin_constant_p(len) && len == 16)
+		return siphash_2u64(data[0], data[1], key);
+	if (__builtin_constant_p(len) && len == 24)
+		return siphash_3u64(data[0], data[1], data[2], key);
+	if (__builtin_constant_p(len) && len == 32)
+		return siphash_4u64(data[0], data[1], data[2], data[3], key);
+	return __siphash_aligned(data, len, key);
+}
+
+/**
+ * siphash - compute 64-bit siphash PRF value
+ * @data: buffer to hash
+ * @size: size of @data
+ * @key: the siphash key
+ */
+static inline u64 siphash(const void *data, size_t len, const siphash_key_t key)
+{
+#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+	if (!IS_ALIGNED((unsigned long)data, SIPHASH_ALIGNMENT))
+		return __siphash_unaligned(data, len, key);
+#endif
+	return ___siphash_aligned(data, len, key);
+}
+
+static inline u64 siphash_2u32(const u32 a, const u32 b, const siphash_key_t key)
+{
+	return siphash_1u64((u64)b << 32 | a, key);
+}
+
+static inline u64 siphash_4u32(const u32 a, const u32 b, const u32 c, const u32 d,
+			       const siphash_key_t key)
+{
+	return siphash_2u64((u64)b << 32 | a, (u64)d << 32 | c, key);
+}
+
+static inline u64 siphash_6u32(const u32 a, const u32 b, const u32 c, const u32 d,
+			       const u32 e, const u32 f, const siphash_key_t key)
+{
+	return siphash_3u64((u64)b << 32 | a, (u64)d << 32 | c, (u64)f << 32 | e,
+			    key);
+}
+
+static inline u64 siphash_8u32(const u32 a, const u32 b, const u32 c, const u32 d,
+			       const u32 e, const u32 f, const u32 g, const u32 h,
+			       const siphash_key_t key)
+{
+	return siphash_4u64((u64)b << 32 | a, (u64)d << 32 | c, (u64)f << 32 | e,
+			    (u64)h << 32 | g, key);
+}
+
+#endif /* _LINUX_SIPHASH_H */
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 7446097f72bd..86254ea99b45 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -1843,9 +1843,9 @@ config TEST_HASH
 	tristate "Perform selftest on hash functions"
 	default n
 	help
-	  Enable this option to test the kernel's integer (<linux/hash,h>)
-	  and string (<linux/stringhash.h>) hash functions on boot
-	  (or module load).
+	  Enable this option to test the kernel's integer (<linux/hash.h>),
+	  string (<linux/stringhash.h>), and siphash (<linux/siphash.h>)
+	  hash functions on boot (or module load).
 
 	  This is intended to help people writing architecture-specific
 	  optimized versions.  If unsure, say N.
diff --git a/lib/Makefile b/lib/Makefile
index 50144a3aeebd..71d398b04a74 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -22,7 +22,8 @@ lib-y := ctype.o string.o vsprintf.o cmdline.o \
 	 sha1.o chacha20.o md5.o irq_regs.o argv_split.o \
 	 flex_proportions.o ratelimit.o show_mem.o \
 	 is_single_threaded.o plist.o decompress.o kobject_uevent.o \
-	 earlycpio.o seq_buf.o nmi_backtrace.o nodemask.o win_minmax.o
+	 earlycpio.o seq_buf.o siphash.o \
+	 nmi_backtrace.o nodemask.o win_minmax.o
 
 lib-$(CONFIG_MMU) += ioremap.o
 lib-$(CONFIG_SMP) += cpumask.o
@@ -44,7 +45,7 @@ obj-$(CONFIG_TEST_HEXDUMP) += test_hexdump.o
 obj-y += kstrtox.o
 obj-$(CONFIG_TEST_BPF) += test_bpf.o
 obj-$(CONFIG_TEST_FIRMWARE) += test_firmware.o
-obj-$(CONFIG_TEST_HASH) += test_hash.o
+obj-$(CONFIG_TEST_HASH) += test_hash.o test_siphash.o
 obj-$(CONFIG_TEST_KASAN) += test_kasan.o
 obj-$(CONFIG_TEST_KSTRTOX) += test-kstrtox.o
 obj-$(CONFIG_TEST_LKM) += test_module.o
diff --git a/lib/siphash.c b/lib/siphash.c
new file mode 100644
index 000000000000..7efc273de5d0
--- /dev/null
+++ b/lib/siphash.c
@@ -0,0 +1,210 @@
+/* Copyright (C) 2016 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
+ *
+ * This file is provided under a dual BSD/GPLv2 license.
+ *
+ * SipHash: a fast short-input PRF
+ * https://131002.net/siphash/
+ *
+ * This implementation is specifically for SipHash2-4.
+ */
+
+#include <linux/siphash.h>
+#include <asm/unaligned.h>
+
+#if defined(CONFIG_DCACHE_WORD_ACCESS) && BITS_PER_LONG == 64
+#include <linux/dcache.h>
+#include <asm/word-at-a-time.h>
+#endif
+
+#define SIPROUND \
+	do { \
+	v0 += v1; v1 = rol64(v1, 13); v1 ^= v0; v0 = rol64(v0, 32); \
+	v2 += v3; v3 = rol64(v3, 16); v3 ^= v2; \
+	v0 += v3; v3 = rol64(v3, 21); v3 ^= v0; \
+	v2 += v1; v1 = rol64(v1, 17); v1 ^= v2; v2 = rol64(v2, 32); \
+	} while(0)
+
+#define PREAMBLE(len) \
+	u64 v0 = 0x736f6d6570736575ULL; \
+	u64 v1 = 0x646f72616e646f6dULL; \
+	u64 v2 = 0x6c7967656e657261ULL; \
+	u64 v3 = 0x7465646279746573ULL; \
+	u64 b = ((u64)len) << 56; \
+	v3 ^= key[1]; \
+	v2 ^= key[0]; \
+	v1 ^= key[1]; \
+	v0 ^= key[0];
+
+#define POSTAMBLE \
+	v3 ^= b; \
+	SIPROUND; \
+	SIPROUND; \
+	v0 ^= b; \
+	v2 ^= 0xff; \
+	SIPROUND; \
+	SIPROUND; \
+	SIPROUND; \
+	SIPROUND; \
+	return (v0 ^ v1) ^ (v2 ^ v3);
+
+u64 __siphash_aligned(const void *data, size_t len, const siphash_key_t key)
+{
+	const u8 *end = data + len - (len % sizeof(u64));
+	const u8 left = len & (sizeof(u64) - 1);
+	u64 m;
+	PREAMBLE(len)
+	for (; data != end; data += sizeof(u64)) {
+		m = le64_to_cpup(data);
+		v3 ^= m;
+		SIPROUND;
+		SIPROUND;
+		v0 ^= m;
+	}
+#if defined(CONFIG_DCACHE_WORD_ACCESS) && BITS_PER_LONG == 64
+	if (left)
+		b |= le64_to_cpu((__force __le64)(load_unaligned_zeropad(data) &
+						  bytemask_from_count(left)));
+#else
+	switch (left) {
+	case 7: b |= ((u64)end[6]) << 48;
+	case 6: b |= ((u64)end[5]) << 40;
+	case 5: b |= ((u64)end[4]) << 32;
+	case 4: b |= le32_to_cpup(data); break;
+	case 3: b |= ((u64)end[2]) << 16;
+	case 2: b |= le16_to_cpup(data); break;
+	case 1: b |= end[0];
+	}
+#endif
+	POSTAMBLE
+}
+EXPORT_SYMBOL(__siphash_aligned);
+
+#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+u64 __siphash_unaligned(const void *data, size_t len, const siphash_key_t key)
+{
+	const u8 *end = data + len - (len % sizeof(u64));
+	const u8 left = len & (sizeof(u64) - 1);
+	u64 m;
+	PREAMBLE(len)
+	for (; data != end; data += sizeof(u64)) {
+		m = get_unaligned_le64(data);
+		v3 ^= m;
+		SIPROUND;
+		SIPROUND;
+		v0 ^= m;
+	}
+#if defined(CONFIG_DCACHE_WORD_ACCESS) && BITS_PER_LONG == 64
+	if (left)
+		b |= le64_to_cpu((__force __le64)(load_unaligned_zeropad(data) &
+						  bytemask_from_count(left)));
+#else
+	switch (left) {
+	case 7: b |= ((u64)end[6]) << 48;
+	case 6: b |= ((u64)end[5]) << 40;
+	case 5: b |= ((u64)end[4]) << 32;
+	case 4: b |= get_unaligned_le32(end); break;
+	case 3: b |= ((u64)end[2]) << 16;
+	case 2: b |= get_unaligned_le16(end); break;
+	case 1: b |= end[0];
+	}
+#endif
+	POSTAMBLE
+}
+EXPORT_SYMBOL(__siphash_unaligned);
+#endif
+
+/**
+ * siphash_1u64 - compute 64-bit siphash PRF value of a u64
+ * @first: first u64
+ * @key: the siphash key
+ */
+u64 siphash_1u64(const u64 first, const siphash_key_t key)
+{
+	PREAMBLE(8)
+	v3 ^= first;
+	SIPROUND;
+	SIPROUND;
+	v0 ^= first;
+	POSTAMBLE
+}
+EXPORT_SYMBOL(siphash_1u64);
+
+/**
+ * siphash_2u64 - compute 64-bit siphash PRF value of 2 u64
+ * @first: first u64
+ * @second: second u64
+ * @key: the siphash key
+ */
+u64 siphash_2u64(const u64 first, const u64 second, const siphash_key_t key)
+{
+	PREAMBLE(16)
+	v3 ^= first;
+	SIPROUND;
+	SIPROUND;
+	v0 ^= first;
+	v3 ^= second;
+	SIPROUND;
+	SIPROUND;
+	v0 ^= second;
+	POSTAMBLE
+}
+EXPORT_SYMBOL(siphash_2u64);
+
+/**
+ * siphash_3u64 - compute 64-bit siphash PRF value of 3 u64
+ * @first: first u64
+ * @second: second u64
+ * @third: third u64
+ * @key: the siphash key
+ */
+u64 siphash_3u64(const u64 first, const u64 second, const u64 third,
+		 const siphash_key_t key)
+{
+	PREAMBLE(24)
+	v3 ^= first;
+	SIPROUND;
+	SIPROUND;
+	v0 ^= first;
+	v3 ^= second;
+	SIPROUND;
+	SIPROUND;
+	v0 ^= second;
+	v3 ^= third;
+	SIPROUND;
+	SIPROUND;
+	v0 ^= third;
+	POSTAMBLE
+}
+EXPORT_SYMBOL(siphash_3u64);
+
+/**
+ * siphash_4u64 - compute 64-bit siphash PRF value of 4 u64
+ * @first: first u64
+ * @second: second u64
+ * @third: third u64
+ * @forth: forth u64
+ * @key: the siphash key
+ */
+u64 siphash_4u64(const u64 first, const u64 second, const u64 third,
+		 const u64 forth, const siphash_key_t key)
+{
+	PREAMBLE(32)
+	v3 ^= first;
+	SIPROUND;
+	SIPROUND;
+	v0 ^= first;
+	v3 ^= second;
+	SIPROUND;
+	SIPROUND;
+	v0 ^= second;
+	v3 ^= third;
+	SIPROUND;
+	SIPROUND;
+	v0 ^= third;
+	v3 ^= forth;
+	SIPROUND;
+	SIPROUND;
+	v0 ^= forth;
+	POSTAMBLE
+}
+EXPORT_SYMBOL(siphash_4u64);
diff --git a/lib/test_siphash.c b/lib/test_siphash.c
new file mode 100644
index 000000000000..906e58a2c946
--- /dev/null
+++ b/lib/test_siphash.c
@@ -0,0 +1,101 @@
+/* Test cases for siphash.c
+ *
+ * Copyright (C) 2016 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
+ *
+ * This file is provided under a dual BSD/GPLv2 license.
+ *
+ * SipHash: a fast short-input PRF
+ * https://131002.net/siphash/
+ *
+ * This implementation is specifically for SipHash2-4.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/siphash.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+
+/* Test vectors taken from official reference source available at:
+ *     https://131002.net/siphash/siphash24.c
+ */
+static const u64 test_vectors[64] = {
+	0x726fdb47dd0e0e31ULL, 0x74f839c593dc67fdULL, 0x0d6c8009d9a94f5aULL,
+	0x85676696d7fb7e2dULL, 0xcf2794e0277187b7ULL, 0x18765564cd99a68dULL,
+	0xcbc9466e58fee3ceULL, 0xab0200f58b01d137ULL, 0x93f5f5799a932462ULL,
+	0x9e0082df0ba9e4b0ULL, 0x7a5dbbc594ddb9f3ULL, 0xf4b32f46226bada7ULL,
+	0x751e8fbc860ee5fbULL, 0x14ea5627c0843d90ULL, 0xf723ca908e7af2eeULL,
+	0xa129ca6149be45e5ULL, 0x3f2acc7f57c29bdbULL, 0x699ae9f52cbe4794ULL,
+	0x4bc1b3f0968dd39cULL, 0xbb6dc91da77961bdULL, 0xbed65cf21aa2ee98ULL,
+	0xd0f2cbb02e3b67c7ULL, 0x93536795e3a33e88ULL, 0xa80c038ccd5ccec8ULL,
+	0xb8ad50c6f649af94ULL, 0xbce192de8a85b8eaULL, 0x17d835b85bbb15f3ULL,
+	0x2f2e6163076bcfadULL, 0xde4daaaca71dc9a5ULL, 0xa6a2506687956571ULL,
+	0xad87a3535c49ef28ULL, 0x32d892fad841c342ULL, 0x7127512f72f27cceULL,
+	0xa7f32346f95978e3ULL, 0x12e0b01abb051238ULL, 0x15e034d40fa197aeULL,
+	0x314dffbe0815a3b4ULL, 0x027990f029623981ULL, 0xcadcd4e59ef40c4dULL,
+	0x9abfd8766a33735cULL, 0x0e3ea96b5304a7d0ULL, 0xad0c42d6fc585992ULL,
+	0x187306c89bc215a9ULL, 0xd4a60abcf3792b95ULL, 0xf935451de4f21df2ULL,
+	0xa9538f0419755787ULL, 0xdb9acddff56ca510ULL, 0xd06c98cd5c0975ebULL,
+	0xe612a3cb9ecba951ULL, 0xc766e62cfcadaf96ULL, 0xee64435a9752fe72ULL,
+	0xa192d576b245165aULL, 0x0a8787bf8ecb74b2ULL, 0x81b3e73d20b49b6fULL,
+	0x7fa8220ba3b2eceaULL, 0x245731c13ca42499ULL, 0xb78dbfaf3a8d83bdULL,
+	0xea1ad565322a1a0bULL, 0x60e61c23a3795013ULL, 0x6606d7e446282b93ULL,
+	0x6ca4ecb15c5f91e1ULL, 0x9f626da15c9625f3ULL, 0xe51b38608ef25f57ULL,
+	0x958a324ceb064572ULL
+};
+static const siphash_key_t test_key =
+	{ 0x0706050403020100ULL , 0x0f0e0d0c0b0a0908ULL };
+
+static int __init siphash_test_init(void)
+{
+	u8 in[64] __aligned(SIPHASH_ALIGNMENT);
+	u8 in_unaligned[65];
+	u8 i;
+	int ret = 0;
+
+	for (i = 0; i < 64; ++i) {
+		in[i] = i;
+		in_unaligned[i + 1] = i;
+		if (siphash(in, i, test_key) != test_vectors[i]) {
+			pr_info("self-test aligned %u: FAIL\n", i + 1);
+			ret = -EINVAL;
+		}
+		if (siphash(in_unaligned + 1, i, test_key) != test_vectors[i]) {
+			pr_info("self-test unaligned %u: FAIL\n", i + 1);
+			ret = -EINVAL;
+		}
+	}
+	if (siphash_1u64(0x0706050403020100ULL, test_key) != test_vectors[8]) {
+		pr_info("self-test 1u64: FAIL\n");
+		ret = -EINVAL;
+	}
+	if (siphash_2u64(0x0706050403020100ULL, 0x0f0e0d0c0b0a0908ULL, test_key) != test_vectors[16]) {
+		pr_info("self-test 2u64: FAIL\n");
+		ret = -EINVAL;
+	}
+	if (siphash_3u64(0x0706050403020100ULL, 0x0f0e0d0c0b0a0908ULL,
+			 0x1716151413121110ULL, test_key) != test_vectors[24]) {
+		pr_info("self-test 3u64: FAIL\n");
+		ret = -EINVAL;
+	}
+	if (siphash_4u64(0x0706050403020100ULL, 0x0f0e0d0c0b0a0908ULL,
+			 0x1716151413121110ULL, 0x1f1e1d1c1b1a1918ULL, test_key) != test_vectors[32]) {
+		pr_info("self-test 4u64: FAIL\n");
+		ret = -EINVAL;
+	}
+	if (!ret)
+		pr_info("self-tests: pass\n");
+	return ret;
+}
+
+static void __exit siphash_test_exit(void)
+{
+}
+
+module_init(siphash_test_init);
+module_exit(siphash_test_exit);
+
+MODULE_AUTHOR("Jason A. Donenfeld <Jason@zx2c4.com>");
+MODULE_LICENSE("Dual BSD/GPL");
-- 
2.11.0

[PATCH v6 2/5] secure_seq: use SipHash in place of MD5

[Jason A. Donenfeld]

This gives a clear speed and security improvement. Siphash is both
faster and is more solid crypto than the aging MD5.

Rather than manually filling MD5 buffers, for IPv6, we simply create
a layout by a simple anonymous struct, for which gcc generates
rather efficient code. For IPv4, we pass the values directly to the
short input convenience functions.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Miller <davem@davemloft.net>
Cc: David Laight <David.Laight@aculab.com>
Cc: Tom Herbert <tom@herbertland.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
---
 net/core/secure_seq.c | 133 ++++++++++++++++++++------------------------------
 1 file changed, 52 insertions(+), 81 deletions(-)

diff --git a/net/core/secure_seq.c b/net/core/secure_seq.c
index 88a8e429fc3e..c80583bf3213 100644
--- a/net/core/secure_seq.c
+++ b/net/core/secure_seq.c
@@ -1,3 +1,5 @@
+/* Copyright (C) 2016 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved. */
+
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/cryptohash.h>
@@ -8,14 +10,14 @@
 #include <linux/ktime.h>
 #include <linux/string.h>
 #include <linux/net.h>
-
+#include <linux/siphash.h>
 #include <net/secure_seq.h>
 
 #if IS_ENABLED(CONFIG_IPV6) || IS_ENABLED(CONFIG_INET)
+#include <linux/in6.h>
 #include <net/tcp.h>
-#define NET_SECRET_SIZE (MD5_MESSAGE_BYTES / 4)
 
-static u32 net_secret[NET_SECRET_SIZE] ____cacheline_aligned;
+static siphash_key_t net_secret;
 
 static __always_inline void net_secret_init(void)
 {
@@ -44,44 +46,42 @@ static u32 seq_scale(u32 seq)
 u32 secure_tcpv6_sequence_number(const __be32 *saddr, const __be32 *daddr,
 				 __be16 sport, __be16 dport, u32 *tsoff)
 {
-	u32 secret[MD5_MESSAGE_BYTES / 4];
-	u32 hash[MD5_DIGEST_WORDS];
-	u32 i;
-
+	const struct {
+		struct in6_addr saddr;
+		struct in6_addr daddr;
+		__be16 sport;
+		__be16 dport;
+		u32 padding;
+	} __aligned(SIPHASH_ALIGNMENT) combined = {
+		.saddr = *(struct in6_addr *)saddr,
+		.daddr = *(struct in6_addr *)daddr,
+		.sport = sport,
+		.dport = dport
+	};
+	u64 hash;
 	net_secret_init();
-	memcpy(hash, saddr, 16);
-	for (i = 0; i < 4; i++)
-		secret[i] = net_secret[i] + (__force u32)daddr[i];
-	secret[4] = net_secret[4] +
-		(((__force u16)sport << 16) + (__force u16)dport);
-	for (i = 5; i < MD5_MESSAGE_BYTES / 4; i++)
-		secret[i] = net_secret[i];
-
-	md5_transform(hash, secret);
-
-	*tsoff = sysctl_tcp_timestamps == 1 ? hash[1] : 0;
-	return seq_scale(hash[0]);
+	hash = siphash(&combined, sizeof(combined), net_secret);
+	*tsoff = sysctl_tcp_timestamps == 1 ? (hash >> 32) : 0;
+	return seq_scale(hash);
 }
 EXPORT_SYMBOL(secure_tcpv6_sequence_number);
 
 u32 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr,
 			       __be16 dport)
 {
-	u32 secret[MD5_MESSAGE_BYTES / 4];
-	u32 hash[MD5_DIGEST_WORDS];
-	u32 i;
-
+	const struct {
+		struct in6_addr saddr;
+		struct in6_addr daddr;
+		__be16 dport;
+		u16 padding1;
+		u32 padding2;
+	} __aligned(SIPHASH_ALIGNMENT) combined = {
+		.saddr = *(struct in6_addr *)saddr,
+		.daddr = *(struct in6_addr *)daddr,
+		.dport = dport
+	};
 	net_secret_init();
-	memcpy(hash, saddr, 16);
-	for (i = 0; i < 4; i++)
-		secret[i] = net_secret[i] + (__force u32) daddr[i];
-	secret[4] = net_secret[4] + (__force u32)dport;
-	for (i = 5; i < MD5_MESSAGE_BYTES / 4; i++)
-		secret[i] = net_secret[i];
-
-	md5_transform(hash, secret);
-
-	return hash[0];
+	return siphash(&combined, sizeof(combined), net_secret);
 }
 EXPORT_SYMBOL(secure_ipv6_port_ephemeral);
 #endif
@@ -91,33 +91,17 @@ EXPORT_SYMBOL(secure_ipv6_port_ephemeral);
 u32 secure_tcp_sequence_number(__be32 saddr, __be32 daddr,
 			       __be16 sport, __be16 dport, u32 *tsoff)
 {
-	u32 hash[MD5_DIGEST_WORDS];
-
+	u64 hash;
 	net_secret_init();
-	hash[0] = (__force u32)saddr;
-	hash[1] = (__force u32)daddr;
-	hash[2] = ((__force u16)sport << 16) + (__force u16)dport;
-	hash[3] = net_secret[15];
-
-	md5_transform(hash, net_secret);
-
-	*tsoff = sysctl_tcp_timestamps == 1 ? hash[1] : 0;
-	return seq_scale(hash[0]);
+	hash = siphash_4u32(saddr, daddr, sport, dport, net_secret);
+	*tsoff = sysctl_tcp_timestamps == 1 ? (hash >> 32) : 0;
+	return seq_scale(hash);
 }
 
 u32 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport)
 {
-	u32 hash[MD5_DIGEST_WORDS];
-
 	net_secret_init();
-	hash[0] = (__force u32)saddr;
-	hash[1] = (__force u32)daddr;
-	hash[2] = (__force u32)dport ^ net_secret[14];
-	hash[3] = net_secret[15];
-
-	md5_transform(hash, net_secret);
-
-	return hash[0];
+	return siphash_4u32(saddr, daddr, dport, 0, net_secret);
 }
 EXPORT_SYMBOL_GPL(secure_ipv4_port_ephemeral);
 #endif
@@ -126,21 +110,11 @@ EXPORT_SYMBOL_GPL(secure_ipv4_port_ephemeral);
 u64 secure_dccp_sequence_number(__be32 saddr, __be32 daddr,
 				__be16 sport, __be16 dport)
 {
-	u32 hash[MD5_DIGEST_WORDS];
 	u64 seq;
-
 	net_secret_init();
-	hash[0] = (__force u32)saddr;
-	hash[1] = (__force u32)daddr;
-	hash[2] = ((__force u16)sport << 16) + (__force u16)dport;
-	hash[3] = net_secret[15];
-
-	md5_transform(hash, net_secret);
-
-	seq = hash[0] | (((u64)hash[1]) << 32);
+	seq = siphash_4u32(saddr, daddr, sport, dport, net_secret);
 	seq += ktime_get_real_ns();
 	seq &= (1ull << 48) - 1;
-
 	return seq;
 }
 EXPORT_SYMBOL(secure_dccp_sequence_number);
@@ -149,26 +123,23 @@ EXPORT_SYMBOL(secure_dccp_sequence_number);
 u64 secure_dccpv6_sequence_number(__be32 *saddr, __be32 *daddr,
 				  __be16 sport, __be16 dport)
 {
-	u32 secret[MD5_MESSAGE_BYTES / 4];
-	u32 hash[MD5_DIGEST_WORDS];
+	const struct {
+		struct in6_addr saddr;
+		struct in6_addr daddr;
+		__be16 sport;
+		__be16 dport;
+		u32 padding;
+	} __aligned(SIPHASH_ALIGNMENT) combined = {
+		.saddr = *(struct in6_addr *)saddr,
+		.daddr = *(struct in6_addr *)daddr,
+		.sport = sport,
+		.dport = dport
+	};
 	u64 seq;
-	u32 i;
-
 	net_secret_init();
-	memcpy(hash, saddr, 16);
-	for (i = 0; i < 4; i++)
-		secret[i] = net_secret[i] + (__force u32)daddr[i];
-	secret[4] = net_secret[4] +
-		(((__force u16)sport << 16) + (__force u16)dport);
-	for (i = 5; i < MD5_MESSAGE_BYTES / 4; i++)
-		secret[i] = net_secret[i];
-
-	md5_transform(hash, secret);
-
-	seq = hash[0] | (((u64)hash[1]) << 32);
+	seq = siphash(&combined, sizeof(combined), net_secret);
 	seq += ktime_get_real_ns();
 	seq &= (1ull << 48) - 1;
-
 	return seq;
 }
 EXPORT_SYMBOL(secure_dccpv6_sequence_number);
-- 
2.11.0

[PATCH v6 3/5] random: use SipHash in place of MD5

[Jason A. Donenfeld]

This duplicates the current algorithm for get_random_int/long, but uses
siphash instead. This comes with several benefits. It's certainly
faster and more cryptographically secure than MD5. This patch also
separates hashed fields into three values instead of one, in order to
increase diffusion.

The previous MD5 algorithm used a per-cpu MD5 state, which caused
successive calls to the function to chain upon each other. While it's
not entirely clear that this kind of chaining is absolutely necessary
when using a secure PRF like siphash, it can't hurt, and the timing of
the call chain does add a degree of natural entropy. So, in keeping with
this design, instead of the massive per-cpu 64-byte MD5 state, there is
instead a per-cpu previously returned value for chaining.

The speed benefits are substantial:

                | siphash | md5    | speedup |
		------------------------------
get_random_long | 137130  | 415983 | 3.03x   |
get_random_int  | 86384   | 343323 | 3.97x   |

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Jean-Philippe Aumasson <jeanphilippe.aumasson@gmail.com>
Cc: Ted Tso <tytso@mit.edu>
---
 drivers/char/random.c | 32 +++++++++++++-------------------
 1 file changed, 13 insertions(+), 19 deletions(-)

diff --git a/drivers/char/random.c b/drivers/char/random.c
index d6876d506220..a51f0ff43f00 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -262,6 +262,7 @@
 #include <linux/syscalls.h>
 #include <linux/completion.h>
 #include <linux/uuid.h>
+#include <linux/siphash.h>
 #include <crypto/chacha20.h>
 
 #include <asm/processor.h>
@@ -2042,7 +2043,7 @@ struct ctl_table random_table[] = {
 };
 #endif 	/* CONFIG_SYSCTL */
 
-static u32 random_int_secret[MD5_MESSAGE_BYTES / 4] ____cacheline_aligned;
+static siphash_key_t random_int_secret;
 
 int random_int_secret_init(void)
 {
@@ -2050,8 +2051,7 @@ int random_int_secret_init(void)
 	return 0;
 }
 
-static DEFINE_PER_CPU(__u32 [MD5_DIGEST_WORDS], get_random_int_hash)
-		__aligned(sizeof(unsigned long));
+static DEFINE_PER_CPU(u64, get_random_int_chaining);
 
 /*
  * Get a random word for internal kernel use only. Similar to urandom but
@@ -2061,19 +2061,16 @@ static DEFINE_PER_CPU(__u32 [MD5_DIGEST_WORDS], get_random_int_hash)
  */
 unsigned int get_random_int(void)
 {
-	__u32 *hash;
 	unsigned int ret;
+	u64 *chaining;
 
 	if (arch_get_random_int(&ret))
 		return ret;
 
-	hash = get_cpu_var(get_random_int_hash);
-
-	hash[0] += current->pid + jiffies + random_get_entropy();
-	md5_transform(hash, random_int_secret);
-	ret = hash[0];
-	put_cpu_var(get_random_int_hash);
-
+	chaining = &get_cpu_var(get_random_int_chaining);
+	ret = *chaining = siphash_3u64(*chaining, jiffies, random_get_entropy() +
+				       current->pid, random_int_secret);
+	put_cpu_var(get_random_int_chaining);
 	return ret;
 }
 EXPORT_SYMBOL(get_random_int);
@@ -2083,19 +2080,16 @@ EXPORT_SYMBOL(get_random_int);
  */
 unsigned long get_random_long(void)
 {
-	__u32 *hash;
 	unsigned long ret;
+	u64 *chaining;
 
 	if (arch_get_random_long(&ret))
 		return ret;
 
-	hash = get_cpu_var(get_random_int_hash);
-
-	hash[0] += current->pid + jiffies + random_get_entropy();
-	md5_transform(hash, random_int_secret);
-	ret = *(unsigned long *)hash;
-	put_cpu_var(get_random_int_hash);
-
+	chaining = &get_cpu_var(get_random_int_chaining);
+	ret = *chaining = siphash_3u64(*chaining, jiffies, random_get_entropy() +
+				       current->pid, random_int_secret);
+	put_cpu_var(get_random_int_chaining);
 	return ret;
 }
 EXPORT_SYMBOL(get_random_long);
-- 
2.11.0

Re: [PATCH v6 3/5] random: use SipHash in place of MD5

[Andy Lutomirski]

On Thu, Dec 15, 2016 at 7:03 PM, Jason A. Donenfeld <Jason@zx2c4.com> wrote:
> -static DEFINE_PER_CPU(__u32 [MD5_DIGEST_WORDS], get_random_int_hash)
> -               __aligned(sizeof(unsigned long));
> +static DEFINE_PER_CPU(u64, get_random_int_chaining);
>

[...]

>  unsigned long get_random_long(void)
>  {
> -       __u32 *hash;
>         unsigned long ret;
> +       u64 *chaining;
>
>         if (arch_get_random_long(&ret))
>                 return ret;
>
> -       hash = get_cpu_var(get_random_int_hash);
> -
> -       hash[0] += current->pid + jiffies + random_get_entropy();
> -       md5_transform(hash, random_int_secret);
> -       ret = *(unsigned long *)hash;
> -       put_cpu_var(get_random_int_hash);
> -
> +       chaining = &get_cpu_var(get_random_int_chaining);
> +       ret = *chaining = siphash_3u64(*chaining, jiffies, random_get_entropy() +
> +                                      current->pid, random_int_secret);
> +       put_cpu_var(get_random_int_chaining);
>         return ret;
>  }

I think it would be nice to try to strenghen the PRNG construction.
FWIW, I'm not an expert in PRNGs, and there's fairly extensive
literature, but I can at least try.  Here are some properties I'd
like:

1. A one-time leak of memory contents doesn't ruin security until
reboot.  This is especially value across suspend and/or hibernation.

2. An attack with a low work factor (2^64?) shouldn't break the scheme
until reboot.


This is effectively doing:

output = H(prev_output, weak "entropy", per-boot secret);

One unfortunately downside is that, if used in a context where an
attacker can see a single output, the attacker learns the chaining
value.  If the attacker can guess the entropy, then, with 2^64 work,
they learn the secret, and they can predict future outputs.

I would advocate adding two types of improvements.  First, re-seed it
every now and then (every 128 calls?) by just replacing both the
chaining value and the percpu secret with fresh CSPRNG output.
Second, change the mode so that an attacker doesn't learn so much
internal state.  For example:

output = H(old_chain, entropy, secret);
new_chain = old_chain + entropy + output;

This increases the effort needed to brute-force the internal state
from 2^64 to 2^128 (barring any weaknesses in the scheme).

Also, can we not call this get_random_int()?  get_random_int() sounds
too much like get_random_bytes(), and the latter is intended to be a
real CSPRNG.  Can we call it get_weak_random_int() or similar?

--Andy

[PATCH v6 4/5] md5: remove from lib and only live in crypto

[Jason A. Donenfeld]

The md5_transform function is no longer used any where in the tree,
except for the crypto api's actual implementation of md5, so we can drop
the function from lib and put it as a static function of the crypto
file, where it belongs. There should be no new users of md5_transform,
anyway, since there are more modern ways of doing what it once achieved.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
---
 crypto/md5.c | 95 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
 lib/Makefile |  2 +-
 lib/md5.c    | 95 ------------------------------------------------------------
 3 files changed, 95 insertions(+), 97 deletions(-)
 delete mode 100644 lib/md5.c

diff --git a/crypto/md5.c b/crypto/md5.c
index 2355a7c25c45..f7ae1a48225b 100644
--- a/crypto/md5.c
+++ b/crypto/md5.c
@@ -21,9 +21,11 @@
 #include <linux/module.h>
 #include <linux/string.h>
 #include <linux/types.h>
-#include <linux/cryptohash.h>
 #include <asm/byteorder.h>
 
+#define MD5_DIGEST_WORDS 4
+#define MD5_MESSAGE_BYTES 64
+
 const u8 md5_zero_message_hash[MD5_DIGEST_SIZE] = {
 	0xd4, 0x1d, 0x8c, 0xd9, 0x8f, 0x00, 0xb2, 0x04,
 	0xe9, 0x80, 0x09, 0x98, 0xec, 0xf8, 0x42, 0x7e,
@@ -47,6 +49,97 @@ static inline void cpu_to_le32_array(u32 *buf, unsigned int words)
 	}
 }
 
+#define F1(x, y, z)	(z ^ (x & (y ^ z)))
+#define F2(x, y, z)	F1(z, x, y)
+#define F3(x, y, z)	(x ^ y ^ z)
+#define F4(x, y, z)	(y ^ (x | ~z))
+
+#define MD5STEP(f, w, x, y, z, in, s) \
+	(w += f(x, y, z) + in, w = (w<<s | w>>(32-s)) + x)
+
+static void md5_transform(__u32 *hash, __u32 const *in)
+{
+	u32 a, b, c, d;
+
+	a = hash[0];
+	b = hash[1];
+	c = hash[2];
+	d = hash[3];
+
+	MD5STEP(F1, a, b, c, d, in[0] + 0xd76aa478, 7);
+	MD5STEP(F1, d, a, b, c, in[1] + 0xe8c7b756, 12);
+	MD5STEP(F1, c, d, a, b, in[2] + 0x242070db, 17);
+	MD5STEP(F1, b, c, d, a, in[3] + 0xc1bdceee, 22);
+	MD5STEP(F1, a, b, c, d, in[4] + 0xf57c0faf, 7);
+	MD5STEP(F1, d, a, b, c, in[5] + 0x4787c62a, 12);
+	MD5STEP(F1, c, d, a, b, in[6] + 0xa8304613, 17);
+	MD5STEP(F1, b, c, d, a, in[7] + 0xfd469501, 22);
+	MD5STEP(F1, a, b, c, d, in[8] + 0x698098d8, 7);
+	MD5STEP(F1, d, a, b, c, in[9] + 0x8b44f7af, 12);
+	MD5STEP(F1, c, d, a, b, in[10] + 0xffff5bb1, 17);
+	MD5STEP(F1, b, c, d, a, in[11] + 0x895cd7be, 22);
+	MD5STEP(F1, a, b, c, d, in[12] + 0x6b901122, 7);
+	MD5STEP(F1, d, a, b, c, in[13] + 0xfd987193, 12);
+	MD5STEP(F1, c, d, a, b, in[14] + 0xa679438e, 17);
+	MD5STEP(F1, b, c, d, a, in[15] + 0x49b40821, 22);
+
+	MD5STEP(F2, a, b, c, d, in[1] + 0xf61e2562, 5);
+	MD5STEP(F2, d, a, b, c, in[6] + 0xc040b340, 9);
+	MD5STEP(F2, c, d, a, b, in[11] + 0x265e5a51, 14);
+	MD5STEP(F2, b, c, d, a, in[0] + 0xe9b6c7aa, 20);
+	MD5STEP(F2, a, b, c, d, in[5] + 0xd62f105d, 5);
+	MD5STEP(F2, d, a, b, c, in[10] + 0x02441453, 9);
+	MD5STEP(F2, c, d, a, b, in[15] + 0xd8a1e681, 14);
+	MD5STEP(F2, b, c, d, a, in[4] + 0xe7d3fbc8, 20);
+	MD5STEP(F2, a, b, c, d, in[9] + 0x21e1cde6, 5);
+	MD5STEP(F2, d, a, b, c, in[14] + 0xc33707d6, 9);
+	MD5STEP(F2, c, d, a, b, in[3] + 0xf4d50d87, 14);
+	MD5STEP(F2, b, c, d, a, in[8] + 0x455a14ed, 20);
+	MD5STEP(F2, a, b, c, d, in[13] + 0xa9e3e905, 5);
+	MD5STEP(F2, d, a, b, c, in[2] + 0xfcefa3f8, 9);
+	MD5STEP(F2, c, d, a, b, in[7] + 0x676f02d9, 14);
+	MD5STEP(F2, b, c, d, a, in[12] + 0x8d2a4c8a, 20);
+
+	MD5STEP(F3, a, b, c, d, in[5] + 0xfffa3942, 4);
+	MD5STEP(F3, d, a, b, c, in[8] + 0x8771f681, 11);
+	MD5STEP(F3, c, d, a, b, in[11] + 0x6d9d6122, 16);
+	MD5STEP(F3, b, c, d, a, in[14] + 0xfde5380c, 23);
+	MD5STEP(F3, a, b, c, d, in[1] + 0xa4beea44, 4);
+	MD5STEP(F3, d, a, b, c, in[4] + 0x4bdecfa9, 11);
+	MD5STEP(F3, c, d, a, b, in[7] + 0xf6bb4b60, 16);
+	MD5STEP(F3, b, c, d, a, in[10] + 0xbebfbc70, 23);
+	MD5STEP(F3, a, b, c, d, in[13] + 0x289b7ec6, 4);
+	MD5STEP(F3, d, a, b, c, in[0] + 0xeaa127fa, 11);
+	MD5STEP(F3, c, d, a, b, in[3] + 0xd4ef3085, 16);
+	MD5STEP(F3, b, c, d, a, in[6] + 0x04881d05, 23);
+	MD5STEP(F3, a, b, c, d, in[9] + 0xd9d4d039, 4);
+	MD5STEP(F3, d, a, b, c, in[12] + 0xe6db99e5, 11);
+	MD5STEP(F3, c, d, a, b, in[15] + 0x1fa27cf8, 16);
+	MD5STEP(F3, b, c, d, a, in[2] + 0xc4ac5665, 23);
+
+	MD5STEP(F4, a, b, c, d, in[0] + 0xf4292244, 6);
+	MD5STEP(F4, d, a, b, c, in[7] + 0x432aff97, 10);
+	MD5STEP(F4, c, d, a, b, in[14] + 0xab9423a7, 15);
+	MD5STEP(F4, b, c, d, a, in[5] + 0xfc93a039, 21);
+	MD5STEP(F4, a, b, c, d, in[12] + 0x655b59c3, 6);
+	MD5STEP(F4, d, a, b, c, in[3] + 0x8f0ccc92, 10);
+	MD5STEP(F4, c, d, a, b, in[10] + 0xffeff47d, 15);
+	MD5STEP(F4, b, c, d, a, in[1] + 0x85845dd1, 21);
+	MD5STEP(F4, a, b, c, d, in[8] + 0x6fa87e4f, 6);
+	MD5STEP(F4, d, a, b, c, in[15] + 0xfe2ce6e0, 10);
+	MD5STEP(F4, c, d, a, b, in[6] + 0xa3014314, 15);
+	MD5STEP(F4, b, c, d, a, in[13] + 0x4e0811a1, 21);
+	MD5STEP(F4, a, b, c, d, in[4] + 0xf7537e82, 6);
+	MD5STEP(F4, d, a, b, c, in[11] + 0xbd3af235, 10);
+	MD5STEP(F4, c, d, a, b, in[2] + 0x2ad7d2bb, 15);
+	MD5STEP(F4, b, c, d, a, in[9] + 0xeb86d391, 21);
+
+	hash[0] += a;
+	hash[1] += b;
+	hash[2] += c;
+	hash[3] += d;
+}
+
 static inline void md5_transform_helper(struct md5_state *ctx)
 {
 	le32_to_cpu_array(ctx->block, sizeof(ctx->block) / sizeof(u32));
diff --git a/lib/Makefile b/lib/Makefile
index 71d398b04a74..1079152607e0 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -19,7 +19,7 @@ KCOV_INSTRUMENT_dynamic_debug.o := n
 lib-y := ctype.o string.o vsprintf.o cmdline.o \
 	 rbtree.o radix-tree.o dump_stack.o timerqueue.o\
 	 idr.o int_sqrt.o extable.o \
-	 sha1.o chacha20.o md5.o irq_regs.o argv_split.o \
+	 sha1.o chacha20.o irq_regs.o argv_split.o \
 	 flex_proportions.o ratelimit.o show_mem.o \
 	 is_single_threaded.o plist.o decompress.o kobject_uevent.o \
 	 earlycpio.o seq_buf.o siphash.o \
diff --git a/lib/md5.c b/lib/md5.c
deleted file mode 100644
index bb0cd01d356d..000000000000
--- a/lib/md5.c
+++ /dev/null
@@ -1,95 +0,0 @@
-#include <linux/compiler.h>
-#include <linux/export.h>
-#include <linux/cryptohash.h>
-
-#define F1(x, y, z)	(z ^ (x & (y ^ z)))
-#define F2(x, y, z)	F1(z, x, y)
-#define F3(x, y, z)	(x ^ y ^ z)
-#define F4(x, y, z)	(y ^ (x | ~z))
-
-#define MD5STEP(f, w, x, y, z, in, s) \
-	(w += f(x, y, z) + in, w = (w<<s | w>>(32-s)) + x)
-
-void md5_transform(__u32 *hash, __u32 const *in)
-{
-	u32 a, b, c, d;
-
-	a = hash[0];
-	b = hash[1];
-	c = hash[2];
-	d = hash[3];
-
-	MD5STEP(F1, a, b, c, d, in[0] + 0xd76aa478, 7);
-	MD5STEP(F1, d, a, b, c, in[1] + 0xe8c7b756, 12);
-	MD5STEP(F1, c, d, a, b, in[2] + 0x242070db, 17);
-	MD5STEP(F1, b, c, d, a, in[3] + 0xc1bdceee, 22);
-	MD5STEP(F1, a, b, c, d, in[4] + 0xf57c0faf, 7);
-	MD5STEP(F1, d, a, b, c, in[5] + 0x4787c62a, 12);
-	MD5STEP(F1, c, d, a, b, in[6] + 0xa8304613, 17);
-	MD5STEP(F1, b, c, d, a, in[7] + 0xfd469501, 22);
-	MD5STEP(F1, a, b, c, d, in[8] + 0x698098d8, 7);
-	MD5STEP(F1, d, a, b, c, in[9] + 0x8b44f7af, 12);
-	MD5STEP(F1, c, d, a, b, in[10] + 0xffff5bb1, 17);
-	MD5STEP(F1, b, c, d, a, in[11] + 0x895cd7be, 22);
-	MD5STEP(F1, a, b, c, d, in[12] + 0x6b901122, 7);
-	MD5STEP(F1, d, a, b, c, in[13] + 0xfd987193, 12);
-	MD5STEP(F1, c, d, a, b, in[14] + 0xa679438e, 17);
-	MD5STEP(F1, b, c, d, a, in[15] + 0x49b40821, 22);
-
-	MD5STEP(F2, a, b, c, d, in[1] + 0xf61e2562, 5);
-	MD5STEP(F2, d, a, b, c, in[6] + 0xc040b340, 9);
-	MD5STEP(F2, c, d, a, b, in[11] + 0x265e5a51, 14);
-	MD5STEP(F2, b, c, d, a, in[0] + 0xe9b6c7aa, 20);
-	MD5STEP(F2, a, b, c, d, in[5] + 0xd62f105d, 5);
-	MD5STEP(F2, d, a, b, c, in[10] + 0x02441453, 9);
-	MD5STEP(F2, c, d, a, b, in[15] + 0xd8a1e681, 14);
-	MD5STEP(F2, b, c, d, a, in[4] + 0xe7d3fbc8, 20);
-	MD5STEP(F2, a, b, c, d, in[9] + 0x21e1cde6, 5);
-	MD5STEP(F2, d, a, b, c, in[14] + 0xc33707d6, 9);
-	MD5STEP(F2, c, d, a, b, in[3] + 0xf4d50d87, 14);
-	MD5STEP(F2, b, c, d, a, in[8] + 0x455a14ed, 20);
-	MD5STEP(F2, a, b, c, d, in[13] + 0xa9e3e905, 5);
-	MD5STEP(F2, d, a, b, c, in[2] + 0xfcefa3f8, 9);
-	MD5STEP(F2, c, d, a, b, in[7] + 0x676f02d9, 14);
-	MD5STEP(F2, b, c, d, a, in[12] + 0x8d2a4c8a, 20);
-
-	MD5STEP(F3, a, b, c, d, in[5] + 0xfffa3942, 4);
-	MD5STEP(F3, d, a, b, c, in[8] + 0x8771f681, 11);
-	MD5STEP(F3, c, d, a, b, in[11] + 0x6d9d6122, 16);
-	MD5STEP(F3, b, c, d, a, in[14] + 0xfde5380c, 23);
-	MD5STEP(F3, a, b, c, d, in[1] + 0xa4beea44, 4);
-	MD5STEP(F3, d, a, b, c, in[4] + 0x4bdecfa9, 11);
-	MD5STEP(F3, c, d, a, b, in[7] + 0xf6bb4b60, 16);
-	MD5STEP(F3, b, c, d, a, in[10] + 0xbebfbc70, 23);
-	MD5STEP(F3, a, b, c, d, in[13] + 0x289b7ec6, 4);
-	MD5STEP(F3, d, a, b, c, in[0] + 0xeaa127fa, 11);
-	MD5STEP(F3, c, d, a, b, in[3] + 0xd4ef3085, 16);
-	MD5STEP(F3, b, c, d, a, in[6] + 0x04881d05, 23);
-	MD5STEP(F3, a, b, c, d, in[9] + 0xd9d4d039, 4);
-	MD5STEP(F3, d, a, b, c, in[12] + 0xe6db99e5, 11);
-	MD5STEP(F3, c, d, a, b, in[15] + 0x1fa27cf8, 16);
-	MD5STEP(F3, b, c, d, a, in[2] + 0xc4ac5665, 23);
-
-	MD5STEP(F4, a, b, c, d, in[0] + 0xf4292244, 6);
-	MD5STEP(F4, d, a, b, c, in[7] + 0x432aff97, 10);
-	MD5STEP(F4, c, d, a, b, in[14] + 0xab9423a7, 15);
-	MD5STEP(F4, b, c, d, a, in[5] + 0xfc93a039, 21);
-	MD5STEP(F4, a, b, c, d, in[12] + 0x655b59c3, 6);
-	MD5STEP(F4, d, a, b, c, in[3] + 0x8f0ccc92, 10);
-	MD5STEP(F4, c, d, a, b, in[10] + 0xffeff47d, 15);
-	MD5STEP(F4, b, c, d, a, in[1] + 0x85845dd1, 21);
-	MD5STEP(F4, a, b, c, d, in[8] + 0x6fa87e4f, 6);
-	MD5STEP(F4, d, a, b, c, in[15] + 0xfe2ce6e0, 10);
-	MD5STEP(F4, c, d, a, b, in[6] + 0xa3014314, 15);
-	MD5STEP(F4, b, c, d, a, in[13] + 0x4e0811a1, 21);
-	MD5STEP(F4, a, b, c, d, in[4] + 0xf7537e82, 6);
-	MD5STEP(F4, d, a, b, c, in[11] + 0xbd3af235, 10);
-	MD5STEP(F4, c, d, a, b, in[2] + 0x2ad7d2bb, 15);
-	MD5STEP(F4, b, c, d, a, in[9] + 0xeb86d391, 21);
-
-	hash[0] += a;
-	hash[1] += b;
-	hash[2] += c;
-	hash[3] += d;
-}
-EXPORT_SYMBOL(md5_transform);
-- 
2.11.0

[PATCH v6 5/5] syncookies: use SipHash in place of SHA1

[Jason A. Donenfeld]

SHA1 is slower and less secure than SipHash, and so replacing syncookie
generation with SipHash makes natural sense. Some BSDs have been doing
this for several years in fact.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
---
 net/ipv4/syncookies.c | 20 ++++----------------
 net/ipv6/syncookies.c | 37 ++++++++++++++++---------------------
 2 files changed, 20 insertions(+), 37 deletions(-)

diff --git a/net/ipv4/syncookies.c b/net/ipv4/syncookies.c
index 3e88467d70ee..03bb068f8888 100644
--- a/net/ipv4/syncookies.c
+++ b/net/ipv4/syncookies.c
@@ -13,13 +13,13 @@
 #include <linux/tcp.h>
 #include <linux/slab.h>
 #include <linux/random.h>
-#include <linux/cryptohash.h>
+#include <linux/siphash.h>
 #include <linux/kernel.h>
 #include <linux/export.h>
 #include <net/tcp.h>
 #include <net/route.h>
 
-static u32 syncookie_secret[2][16-4+SHA_DIGEST_WORDS] __read_mostly;
+static siphash_key_t syncookie_secret[2] __read_mostly;
 
 #define COOKIEBITS 24	/* Upper bits store count */
 #define COOKIEMASK (((__u32)1 << COOKIEBITS) - 1)
@@ -48,24 +48,12 @@ static u32 syncookie_secret[2][16-4+SHA_DIGEST_WORDS] __read_mostly;
 #define TSBITS	6
 #define TSMASK	(((__u32)1 << TSBITS) - 1)
 
-static DEFINE_PER_CPU(__u32 [16 + 5 + SHA_WORKSPACE_WORDS], ipv4_cookie_scratch);
-
 static u32 cookie_hash(__be32 saddr, __be32 daddr, __be16 sport, __be16 dport,
 		       u32 count, int c)
 {
-	__u32 *tmp;
-
 	net_get_random_once(syncookie_secret, sizeof(syncookie_secret));
-
-	tmp  = this_cpu_ptr(ipv4_cookie_scratch);
-	memcpy(tmp + 4, syncookie_secret[c], sizeof(syncookie_secret[c]));
-	tmp[0] = (__force u32)saddr;
-	tmp[1] = (__force u32)daddr;
-	tmp[2] = ((__force u32)sport << 16) + (__force u32)dport;
-	tmp[3] = count;
-	sha_transform(tmp + 16, (__u8 *)tmp, tmp + 16 + 5);
-
-	return tmp[17];
+	return siphash_4u32(saddr, daddr, (u32)sport << 16 | dport, count,
+			    syncookie_secret[c]);
 }
 
 
diff --git a/net/ipv6/syncookies.c b/net/ipv6/syncookies.c
index a4d49760bf43..04d19e89a3e0 100644
--- a/net/ipv6/syncookies.c
+++ b/net/ipv6/syncookies.c
@@ -16,7 +16,7 @@
 
 #include <linux/tcp.h>
 #include <linux/random.h>
-#include <linux/cryptohash.h>
+#include <linux/siphash.h>
 #include <linux/kernel.h>
 #include <net/ipv6.h>
 #include <net/tcp.h>
@@ -24,7 +24,7 @@
 #define COOKIEBITS 24	/* Upper bits store count */
 #define COOKIEMASK (((__u32)1 << COOKIEBITS) - 1)
 
-static u32 syncookie6_secret[2][16-4+SHA_DIGEST_WORDS] __read_mostly;
+static siphash_key_t syncookie6_secret[2] __read_mostly;
 
 /* RFC 2460, Section 8.3:
  * [ipv6 tcp] MSS must be computed as the maximum packet size minus 60 [..]
@@ -41,30 +41,25 @@ static __u16 const msstab[] = {
 	9000 - 60,
 };
 
-static DEFINE_PER_CPU(__u32 [16 + 5 + SHA_WORKSPACE_WORDS], ipv6_cookie_scratch);
-
 static u32 cookie_hash(const struct in6_addr *saddr, const struct in6_addr *daddr,
 		       __be16 sport, __be16 dport, u32 count, int c)
 {
-	__u32 *tmp;
+	const struct {
+		struct in6_addr saddr;
+		struct in6_addr daddr;
+		u32 count;
+		u16 sport;
+		u16 dport;
+	} __aligned(SIPHASH_ALIGNMENT) combined = {
+		.saddr = *saddr,
+		.daddr = *daddr,
+		.count = count,
+		.sport = sport,
+		.dport = dport
+	};
 
 	net_get_random_once(syncookie6_secret, sizeof(syncookie6_secret));
-
-	tmp  = this_cpu_ptr(ipv6_cookie_scratch);
-
-	/*
-	 * we have 320 bits of information to hash, copy in the remaining
-	 * 192 bits required for sha_transform, from the syncookie6_secret
-	 * and overwrite the digest with the secret
-	 */
-	memcpy(tmp + 10, syncookie6_secret[c], 44);
-	memcpy(tmp, saddr, 16);
-	memcpy(tmp + 4, daddr, 16);
-	tmp[8] = ((__force u32)sport << 16) + (__force u32)dport;
-	tmp[9] = count;
-	sha_transform(tmp + 16, (__u8 *)tmp, tmp + 16 + 5);
-
-	return tmp[17];
+	return siphash(&combined, sizeof(combined), syncookie6_secret[c]);
 }
 
 static __u32 secure_tcp_syn_cookie(const struct in6_addr *saddr,
-- 
2.11.0

[PATCH v7 0/6] The SipHash Patchset

[Jason A. Donenfeld]

Hey folks,

Again we've made huge progress, with this latest version now shipping
Jean-Phillipe Aumasson's HalfSipHash, which should be much more competitive
with jhash (in addition to being more secure, of course).

There are dozens of little cleanups and improvements right and left throughout
this series, so I urge you to take a look at the whole thing. I've tried to
take into consideration lots of concerns and suggestions from many of you
over the last week.

There is also now documentation! And the test suite now has full coverage of
all functions.

Finally, there's been some significant benchmarking, and now a few commit
messages have some performance numbers.

Please send your Reviewed-by lines as you see fit.

Regards,
Jason

Jason A. Donenfeld (6):
  siphash: add cryptographically secure PRF
  secure_seq: use SipHash in place of MD5
  random: use SipHash in place of MD5
  md5: remove from lib and only live in crypto
  syncookies: use SipHash in place of SHA1
  siphash: implement HalfSipHash1-3 for hash tables

 Documentation/siphash.txt | 154 +++++++++++++
 MAINTAINERS               |   7 +
 crypto/md5.c              |  95 +++++++-
 drivers/char/random.c     |  84 ++++---
 include/linux/random.h    |   1 -
 include/linux/siphash.h   | 133 +++++++++++
 init/main.c               |   1 -
 lib/Kconfig.debug         |   6 +-
 lib/Makefile              |   7 +-
 lib/md5.c                 |  95 --------
 lib/siphash.c             | 548 ++++++++++++++++++++++++++++++++++++++++++++++
 lib/test_siphash.c        | 208 ++++++++++++++++++
 net/core/secure_seq.c     | 135 +++++-------
 net/ipv4/syncookies.c     |  20 +-
 net/ipv6/syncookies.c     |  37 ++--
 15 files changed, 1274 insertions(+), 257 deletions(-)
 create mode 100644 Documentation/siphash.txt
 create mode 100644 include/linux/siphash.h
 delete mode 100644 lib/md5.c
 create mode 100644 lib/siphash.c
 create mode 100644 lib/test_siphash.c

-- 
2.11.0

[PATCH v7 1/6] siphash: add cryptographically secure PRF

[Jason A. Donenfeld]

SipHash is a 64-bit keyed hash function that is actually a
cryptographically secure PRF, like HMAC. Except SipHash is super fast,
and is meant to be used as a hashtable keyed lookup function, or as a
general PRF for short input use cases, such as sequence numbers or RNG
chaining.

For the first usage:

There are a variety of attacks known as "hashtable poisoning" in which an
attacker forms some data such that the hash of that data will be the
same, and then preceeds to fill up all entries of a hashbucket. This is
a realistic and well-known denial-of-service vector. Currently
hashtables use jhash, which is fast but not secure, and some kind of
rotating key scheme (or none at all, which isn't good). SipHash is meant
as a replacement for jhash in these cases.

There are a modicum of places in the kernel that are vulnerable to
hashtable poisoning attacks, either via userspace vectors or network
vectors, and there's not a reliable mechanism inside the kernel at the
moment to fix it. The first step toward fixing these issues is actually
getting a secure primitive into the kernel for developers to use. Then
we can, bit by bit, port things over to it as deemed appropriate.

While SipHash is extremely fast for a cryptographically secure function,
it is likely a bit slower than the insecure jhash, and so replacements
will be evaluated on a case-by-case basis based on whether or not the
difference in speed is negligible and whether or not the current jhash usage
poses a real security risk.

For the second usage:

A few places in the kernel are using MD5 or SHA1 for creating secure
sequence numbers, syn cookies, port numbers, or fast random numbers.
SipHash is a faster and more fitting, and more secure replacement for MD5
in those situations. Replacing MD5 and SHA1 with SipHash for these uses is
obvious and straight-forward, and so is submitted along with this patch
series. There shouldn't be much of a debate over its efficacy.

Dozens of languages are already using this internally for their hash
tables and PRFs. Some of the BSDs already use this in their kernels.
SipHash is a widely known high-speed solution to a widely known set of
problems, and it's time we catch-up.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Jean-Philippe Aumasson <jeanphilippe.aumasson@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: David Laight <David.Laight@aculab.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
---
 Documentation/siphash.txt |  79 ++++++++++++++++
 MAINTAINERS               |   7 ++
 include/linux/siphash.h   |  79 ++++++++++++++++
 lib/Kconfig.debug         |   6 +-
 lib/Makefile              |   5 +-
 lib/siphash.c             | 232 ++++++++++++++++++++++++++++++++++++++++++++++
 lib/test_siphash.c        | 119 ++++++++++++++++++++++++
 7 files changed, 522 insertions(+), 5 deletions(-)
 create mode 100644 Documentation/siphash.txt
 create mode 100644 include/linux/siphash.h
 create mode 100644 lib/siphash.c
 create mode 100644 lib/test_siphash.c

diff --git a/Documentation/siphash.txt b/Documentation/siphash.txt
new file mode 100644
index 000000000000..39ff7f0438e7
--- /dev/null
+++ b/Documentation/siphash.txt
@@ -0,0 +1,79 @@
+         SipHash - a short input PRF
+-----------------------------------------------
+Written by Jason A. Donenfeld <jason@zx2c4.com>
+
+SipHash is a cryptographically secure PRF -- a keyed hash function -- that
+performs very well for short inputs, hence the name. It was designed by
+cryptographers Daniel J. Bernstein and Jean-Philippe Aumasson. It is intended
+as a replacement for some uses of: `jhash`, `md5_transform`, `sha_transform`,
+and so forth.
+
+SipHash takes a secret key filled with randomly generated numbers and either
+an input buffer or several input integers. It spits out an integer that is
+indistinguishable from random. You may then use that integer as part of secure
+sequence numbers, secure cookies, or mask it off for use in a hash table.
+
+1. Generating a key
+
+Keys should always be generated from a cryptographically secure source of
+random numbers, either using get_random_bytes or get_random_once:
+
+siphash_key_t key;
+get_random_bytes(key, sizeof(key));
+
+If you're not deriving your key from here, you're doing it wrong.
+
+2. Using the functions
+
+There are two variants of the function, one that takes a list of integers, and
+one that takes a buffer:
+
+u64 siphash(const void *data, size_t len, siphash_key_t key);
+
+And:
+
+u64 siphash_1u64(u64, siphash_key_t key);
+u64 siphash_2u64(u64, u64, siphash_key_t key);
+u64 siphash_3u64(u64, u64, u64, siphash_key_t key);
+u64 siphash_4u64(u64, u64, u64, u64, siphash_key_t key);
+u64 siphash_1u32(u32, siphash_key_t key);
+u64 siphash_2u32(u32, u32, siphash_key_t key);
+u64 siphash_3u32(u32, u32, u32, siphash_key_t key);
+u64 siphash_4u32(u32, u32, u32, u32, siphash_key_t key);
+
+If you pass the generic siphash function something of a constant length, it
+will constant fold at compile-time and automatically choose one of the
+optimized functions.
+
+3. Hashtable key function usage:
+
+struct some_hashtable {
+	DECLARE_HASHTABLE(hashtable, 8);
+	siphash_key_t key;
+};
+
+void init_hashtable(struct some_hashtable *table)
+{
+	get_random_bytes(table->key, sizeof(table->key));
+}
+
+static inline hlist_head *some_hashtable_bucket(struct some_hashtable *table, struct interesting_input *input)
+{
+	return &table->hashtable[siphash(input, sizeof(*input), table->key) & (HASH_SIZE(table->hashtable) - 1)];
+}
+
+You may then iterate like usual over the returned hash bucket.
+
+4. Security
+
+SipHash has a very high security margin, with its 128-bit key. So long as the
+key is kept secret, it is impossible for an attacker to guess the outputs of
+the function, even if being able to observe many outputs, since 2^128 outputs
+is significant.
+
+Linux implements the "2-4" variant of SipHash.
+
+5. Resources
+
+Read the SipHash paper if you're interested in learning more:
+https://131002.net/siphash/siphash.pdf
diff --git a/MAINTAINERS b/MAINTAINERS
index 59c9895d73d5..5d87a8c1056a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11231,6 +11231,13 @@ F:	arch/arm/mach-s3c24xx/mach-bast.c
 F:	arch/arm/mach-s3c24xx/bast-ide.c
 F:	arch/arm/mach-s3c24xx/bast-irq.c
 
+SIPHASH PRF ROUTINES
+M:	Jason A. Donenfeld <Jason@zx2c4.com>
+S:	Maintained
+F:	lib/siphash.c
+F:	lib/test_siphash.c
+F:	include/linux/siphash.h
+
 TI DAVINCI MACHINE SUPPORT
 M:	Sekhar Nori <nsekhar@ti.com>
 M:	Kevin Hilman <khilman@kernel.org>
diff --git a/include/linux/siphash.h b/include/linux/siphash.h
new file mode 100644
index 000000000000..7aa666eb00d9
--- /dev/null
+++ b/include/linux/siphash.h
@@ -0,0 +1,79 @@
+/* Copyright (C) 2016 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
+ *
+ * This file is provided under a dual BSD/GPLv2 license.
+ *
+ * SipHash: a fast short-input PRF
+ * https://131002.net/siphash/
+ *
+ * This implementation is specifically for SipHash2-4.
+ */
+
+#ifndef _LINUX_SIPHASH_H
+#define _LINUX_SIPHASH_H
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#define SIPHASH_ALIGNMENT __alignof__(u64)
+typedef u64 siphash_key_t[2];
+
+u64 __siphash_aligned(const void *data, size_t len, const siphash_key_t key);
+#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+u64 __siphash_unaligned(const void *data, size_t len, const siphash_key_t key);
+#endif
+
+u64 siphash_1u64(const u64 a, const siphash_key_t key);
+u64 siphash_2u64(const u64 a, const u64 b, const siphash_key_t key);
+u64 siphash_3u64(const u64 a, const u64 b, const u64 c,
+		 const siphash_key_t key);
+u64 siphash_4u64(const u64 a, const u64 b, const u64 c, const u64 d,
+		 const siphash_key_t key);
+u64 siphash_1u32(const u32 a, const siphash_key_t key);
+u64 siphash_3u32(const u32 a, const u32 b, const u32 c, const siphash_key_t key);
+
+static inline u64 siphash_2u32(const u32 a, const u32 b, const siphash_key_t key)
+{
+	return siphash_1u64((u64)b << 32 | a, key);
+}
+static inline u64 siphash_4u32(const u32 a, const u32 b, const u32 c, const u32 d,
+			       const siphash_key_t key)
+{
+	return siphash_2u64((u64)b << 32 | a, (u64)d << 32 | c, key);
+}
+
+
+static inline u64 ___siphash_aligned(const __le64 *data, size_t len, const siphash_key_t key)
+{
+	if (__builtin_constant_p(len) && len == 4)
+		return siphash_1u32(le32_to_cpu(data[0]), key);
+	if (__builtin_constant_p(len) && len == 8)
+		return siphash_1u64(le64_to_cpu(data[0]), key);
+	if (__builtin_constant_p(len) && len == 16)
+		return siphash_2u64(le64_to_cpu(data[0]), le64_to_cpu(data[1]),
+				    key);
+	if (__builtin_constant_p(len) && len == 24)
+		return siphash_3u64(le64_to_cpu(data[0]), le64_to_cpu(data[1]),
+				    le64_to_cpu(data[2]), key);
+	if (__builtin_constant_p(len) && len == 32)
+		return siphash_4u64(le64_to_cpu(data[0]), le64_to_cpu(data[1]),
+				    le64_to_cpu(data[2]), le64_to_cpu(data[3]),
+				    key);
+	return __siphash_aligned(data, len, key);
+}
+
+/**
+ * siphash - compute 64-bit siphash PRF value
+ * @data: buffer to hash
+ * @size: size of @data
+ * @key: the siphash key
+ */
+static inline u64 siphash(const void *data, size_t len, const siphash_key_t key)
+{
+#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+	if (!IS_ALIGNED((unsigned long)data, SIPHASH_ALIGNMENT))
+		return __siphash_unaligned(data, len, key);
+#endif
+	return ___siphash_aligned(data, len, key);
+}
+
+#endif /* _LINUX_SIPHASH_H */
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 7446097f72bd..86254ea99b45 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -1843,9 +1843,9 @@ config TEST_HASH
 	tristate "Perform selftest on hash functions"
 	default n
 	help
-	  Enable this option to test the kernel's integer (<linux/hash,h>)
-	  and string (<linux/stringhash.h>) hash functions on boot
-	  (or module load).
+	  Enable this option to test the kernel's integer (<linux/hash.h>),
+	  string (<linux/stringhash.h>), and siphash (<linux/siphash.h>)
+	  hash functions on boot (or module load).
 
 	  This is intended to help people writing architecture-specific
 	  optimized versions.  If unsure, say N.
diff --git a/lib/Makefile b/lib/Makefile
index 50144a3aeebd..71d398b04a74 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -22,7 +22,8 @@ lib-y := ctype.o string.o vsprintf.o cmdline.o \
 	 sha1.o chacha20.o md5.o irq_regs.o argv_split.o \
 	 flex_proportions.o ratelimit.o show_mem.o \
 	 is_single_threaded.o plist.o decompress.o kobject_uevent.o \
-	 earlycpio.o seq_buf.o nmi_backtrace.o nodemask.o win_minmax.o
+	 earlycpio.o seq_buf.o siphash.o \
+	 nmi_backtrace.o nodemask.o win_minmax.o
 
 lib-$(CONFIG_MMU) += ioremap.o
 lib-$(CONFIG_SMP) += cpumask.o
@@ -44,7 +45,7 @@ obj-$(CONFIG_TEST_HEXDUMP) += test_hexdump.o
 obj-y += kstrtox.o
 obj-$(CONFIG_TEST_BPF) += test_bpf.o
 obj-$(CONFIG_TEST_FIRMWARE) += test_firmware.o
-obj-$(CONFIG_TEST_HASH) += test_hash.o
+obj-$(CONFIG_TEST_HASH) += test_hash.o test_siphash.o
 obj-$(CONFIG_TEST_KASAN) += test_kasan.o
 obj-$(CONFIG_TEST_KSTRTOX) += test-kstrtox.o
 obj-$(CONFIG_TEST_LKM) += test_module.o
diff --git a/lib/siphash.c b/lib/siphash.c
new file mode 100644
index 000000000000..ff2151313667
--- /dev/null
+++ b/lib/siphash.c
@@ -0,0 +1,232 @@
+/* Copyright (C) 2016 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
+ *
+ * This file is provided under a dual BSD/GPLv2 license.
+ *
+ * SipHash: a fast short-input PRF
+ * https://131002.net/siphash/
+ *
+ * This implementation is specifically for SipHash2-4.
+ */
+
+#include <linux/siphash.h>
+#include <asm/unaligned.h>
+
+#if defined(CONFIG_DCACHE_WORD_ACCESS) && BITS_PER_LONG == 64
+#include <linux/dcache.h>
+#include <asm/word-at-a-time.h>
+#endif
+
+#define SIPROUND \
+	do { \
+	v0 += v1; v1 = rol64(v1, 13); v1 ^= v0; v0 = rol64(v0, 32); \
+	v2 += v3; v3 = rol64(v3, 16); v3 ^= v2; \
+	v0 += v3; v3 = rol64(v3, 21); v3 ^= v0; \
+	v2 += v1; v1 = rol64(v1, 17); v1 ^= v2; v2 = rol64(v2, 32); \
+	} while(0)
+
+#define PREAMBLE(len) \
+	u64 v0 = 0x736f6d6570736575ULL; \
+	u64 v1 = 0x646f72616e646f6dULL; \
+	u64 v2 = 0x6c7967656e657261ULL; \
+	u64 v3 = 0x7465646279746573ULL; \
+	u64 b = ((u64)len) << 56; \
+	v3 ^= key[1]; \
+	v2 ^= key[0]; \
+	v1 ^= key[1]; \
+	v0 ^= key[0];
+
+#define POSTAMBLE \
+	v3 ^= b; \
+	SIPROUND; \
+	SIPROUND; \
+	v0 ^= b; \
+	v2 ^= 0xff; \
+	SIPROUND; \
+	SIPROUND; \
+	SIPROUND; \
+	SIPROUND; \
+	return (v0 ^ v1) ^ (v2 ^ v3);
+
+u64 __siphash_aligned(const void *data, size_t len, const siphash_key_t key)
+{
+	const u8 *end = data + len - (len % sizeof(u64));
+	const u8 left = len & (sizeof(u64) - 1);
+	u64 m;
+	PREAMBLE(len)
+	for (; data != end; data += sizeof(u64)) {
+		m = le64_to_cpup(data);
+		v3 ^= m;
+		SIPROUND;
+		SIPROUND;
+		v0 ^= m;
+	}
+#if defined(CONFIG_DCACHE_WORD_ACCESS) && BITS_PER_LONG == 64
+	if (left)
+		b |= le64_to_cpu((__force __le64)(load_unaligned_zeropad(data) &
+						  bytemask_from_count(left)));
+#else
+	switch (left) {
+	case 7: b |= ((u64)end[6]) << 48;
+	case 6: b |= ((u64)end[5]) << 40;
+	case 5: b |= ((u64)end[4]) << 32;
+	case 4: b |= le32_to_cpup(data); break;
+	case 3: b |= ((u64)end[2]) << 16;
+	case 2: b |= le16_to_cpup(data); break;
+	case 1: b |= end[0];
+	}
+#endif
+	POSTAMBLE
+}
+EXPORT_SYMBOL(__siphash_aligned);
+
+#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+u64 __siphash_unaligned(const void *data, size_t len, const siphash_key_t key)
+{
+	const u8 *end = data + len - (len % sizeof(u64));
+	const u8 left = len & (sizeof(u64) - 1);
+	u64 m;
+	PREAMBLE(len)
+	for (; data != end; data += sizeof(u64)) {
+		m = get_unaligned_le64(data);
+		v3 ^= m;
+		SIPROUND;
+		SIPROUND;
+		v0 ^= m;
+	}
+#if defined(CONFIG_DCACHE_WORD_ACCESS) && BITS_PER_LONG == 64
+	if (left)
+		b |= le64_to_cpu((__force __le64)(load_unaligned_zeropad(data) &
+						  bytemask_from_count(left)));
+#else
+	switch (left) {
+	case 7: b |= ((u64)end[6]) << 48;
+	case 6: b |= ((u64)end[5]) << 40;
+	case 5: b |= ((u64)end[4]) << 32;
+	case 4: b |= get_unaligned_le32(end); break;
+	case 3: b |= ((u64)end[2]) << 16;
+	case 2: b |= get_unaligned_le16(end); break;
+	case 1: b |= end[0];
+	}
+#endif
+	POSTAMBLE
+}
+EXPORT_SYMBOL(__siphash_unaligned);
+#endif
+
+/**
+ * siphash_1u64 - compute 64-bit siphash PRF value of a u64
+ * @first: first u64
+ * @key: the siphash key
+ */
+u64 siphash_1u64(const u64 first, const siphash_key_t key)
+{
+	PREAMBLE(8)
+	v3 ^= first;
+	SIPROUND;
+	SIPROUND;
+	v0 ^= first;
+	POSTAMBLE
+}
+EXPORT_SYMBOL(siphash_1u64);
+
+/**
+ * siphash_2u64 - compute 64-bit siphash PRF value of 2 u64
+ * @first: first u64
+ * @second: second u64
+ * @key: the siphash key
+ */
+u64 siphash_2u64(const u64 first, const u64 second, const siphash_key_t key)
+{
+	PREAMBLE(16)
+	v3 ^= first;
+	SIPROUND;
+	SIPROUND;
+	v0 ^= first;
+	v3 ^= second;
+	SIPROUND;
+	SIPROUND;
+	v0 ^= second;
+	POSTAMBLE
+}
+EXPORT_SYMBOL(siphash_2u64);
+
+/**
+ * siphash_3u64 - compute 64-bit siphash PRF value of 3 u64
+ * @first: first u64
+ * @second: second u64
+ * @third: third u64
+ * @key: the siphash key
+ */
+u64 siphash_3u64(const u64 first, const u64 second, const u64 third,
+		 const siphash_key_t key)
+{
+	PREAMBLE(24)
+	v3 ^= first;
+	SIPROUND;
+	SIPROUND;
+	v0 ^= first;
+	v3 ^= second;
+	SIPROUND;
+	SIPROUND;
+	v0 ^= second;
+	v3 ^= third;
+	SIPROUND;
+	SIPROUND;
+	v0 ^= third;
+	POSTAMBLE
+}
+EXPORT_SYMBOL(siphash_3u64);
+
+/**
+ * siphash_4u64 - compute 64-bit siphash PRF value of 4 u64
+ * @first: first u64
+ * @second: second u64
+ * @third: third u64
+ * @forth: forth u64
+ * @key: the siphash key
+ */
+u64 siphash_4u64(const u64 first, const u64 second, const u64 third,
+		 const u64 forth, const siphash_key_t key)
+{
+	PREAMBLE(32)
+	v3 ^= first;
+	SIPROUND;
+	SIPROUND;
+	v0 ^= first;
+	v3 ^= second;
+	SIPROUND;
+	SIPROUND;
+	v0 ^= second;
+	v3 ^= third;
+	SIPROUND;
+	SIPROUND;
+	v0 ^= third;
+	v3 ^= forth;
+	SIPROUND;
+	SIPROUND;
+	v0 ^= forth;
+	POSTAMBLE
+}
+EXPORT_SYMBOL(siphash_4u64);
+
+u64 siphash_1u32(const u32 first, const siphash_key_t key)
+{
+	PREAMBLE(4)
+	b |= first;
+	POSTAMBLE
+}
+EXPORT_SYMBOL(siphash_1u32);
+
+u64 siphash_3u32(const u32 first, const u32 second, const u32 third,
+		 const siphash_key_t key)
+{
+	u64 combined = (u64)second << 32 | first;
+	PREAMBLE(12)
+	v3 ^= combined;
+	SIPROUND;
+	SIPROUND;
+	v0 ^= combined;
+	b |= third;
+	POSTAMBLE
+}
+EXPORT_SYMBOL(siphash_3u32);
diff --git a/lib/test_siphash.c b/lib/test_siphash.c
new file mode 100644
index 000000000000..e0ba2cf8dc67
--- /dev/null
+++ b/lib/test_siphash.c
@@ -0,0 +1,119 @@
+/* Test cases for siphash.c
+ *
+ * Copyright (C) 2016 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
+ *
+ * This file is provided under a dual BSD/GPLv2 license.
+ *
+ * SipHash: a fast short-input PRF
+ * https://131002.net/siphash/
+ *
+ * This implementation is specifically for SipHash2-4.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/siphash.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+
+/* Test vectors taken from official reference source available at:
+ *     https://131002.net/siphash/siphash24.c
+ */
+static const u64 test_vectors[64] = {
+	0x726fdb47dd0e0e31ULL, 0x74f839c593dc67fdULL, 0x0d6c8009d9a94f5aULL,
+	0x85676696d7fb7e2dULL, 0xcf2794e0277187b7ULL, 0x18765564cd99a68dULL,
+	0xcbc9466e58fee3ceULL, 0xab0200f58b01d137ULL, 0x93f5f5799a932462ULL,
+	0x9e0082df0ba9e4b0ULL, 0x7a5dbbc594ddb9f3ULL, 0xf4b32f46226bada7ULL,
+	0x751e8fbc860ee5fbULL, 0x14ea5627c0843d90ULL, 0xf723ca908e7af2eeULL,
+	0xa129ca6149be45e5ULL, 0x3f2acc7f57c29bdbULL, 0x699ae9f52cbe4794ULL,
+	0x4bc1b3f0968dd39cULL, 0xbb6dc91da77961bdULL, 0xbed65cf21aa2ee98ULL,
+	0xd0f2cbb02e3b67c7ULL, 0x93536795e3a33e88ULL, 0xa80c038ccd5ccec8ULL,
+	0xb8ad50c6f649af94ULL, 0xbce192de8a85b8eaULL, 0x17d835b85bbb15f3ULL,
+	0x2f2e6163076bcfadULL, 0xde4daaaca71dc9a5ULL, 0xa6a2506687956571ULL,
+	0xad87a3535c49ef28ULL, 0x32d892fad841c342ULL, 0x7127512f72f27cceULL,
+	0xa7f32346f95978e3ULL, 0x12e0b01abb051238ULL, 0x15e034d40fa197aeULL,
+	0x314dffbe0815a3b4ULL, 0x027990f029623981ULL, 0xcadcd4e59ef40c4dULL,
+	0x9abfd8766a33735cULL, 0x0e3ea96b5304a7d0ULL, 0xad0c42d6fc585992ULL,
+	0x187306c89bc215a9ULL, 0xd4a60abcf3792b95ULL, 0xf935451de4f21df2ULL,
+	0xa9538f0419755787ULL, 0xdb9acddff56ca510ULL, 0xd06c98cd5c0975ebULL,
+	0xe612a3cb9ecba951ULL, 0xc766e62cfcadaf96ULL, 0xee64435a9752fe72ULL,
+	0xa192d576b245165aULL, 0x0a8787bf8ecb74b2ULL, 0x81b3e73d20b49b6fULL,
+	0x7fa8220ba3b2eceaULL, 0x245731c13ca42499ULL, 0xb78dbfaf3a8d83bdULL,
+	0xea1ad565322a1a0bULL, 0x60e61c23a3795013ULL, 0x6606d7e446282b93ULL,
+	0x6ca4ecb15c5f91e1ULL, 0x9f626da15c9625f3ULL, 0xe51b38608ef25f57ULL,
+	0x958a324ceb064572ULL
+};
+static const siphash_key_t test_key =
+	{ 0x0706050403020100ULL , 0x0f0e0d0c0b0a0908ULL };
+
+static int __init siphash_test_init(void)
+{
+	u8 in[64] __aligned(SIPHASH_ALIGNMENT);
+	u8 in_unaligned[65];
+	u8 i;
+	int ret = 0;
+
+	for (i = 0; i < 64; ++i) {
+		in[i] = i;
+		in_unaligned[i + 1] = i;
+		if (siphash(in, i, test_key) != test_vectors[i]) {
+			pr_info("self-test aligned %u: FAIL\n", i + 1);
+			ret = -EINVAL;
+		}
+		if (siphash(in_unaligned + 1, i, test_key) != test_vectors[i]) {
+			pr_info("self-test unaligned %u: FAIL\n", i + 1);
+			ret = -EINVAL;
+		}
+	}
+	if (siphash_1u64(0x0706050403020100ULL, test_key) != test_vectors[8]) {
+		pr_info("self-test 1u64: FAIL\n");
+		ret = -EINVAL;
+	}
+	if (siphash_2u64(0x0706050403020100ULL, 0x0f0e0d0c0b0a0908ULL, test_key) != test_vectors[16]) {
+		pr_info("self-test 2u64: FAIL\n");
+		ret = -EINVAL;
+	}
+	if (siphash_3u64(0x0706050403020100ULL, 0x0f0e0d0c0b0a0908ULL,
+			 0x1716151413121110ULL, test_key) != test_vectors[24]) {
+		pr_info("self-test 3u64: FAIL\n");
+		ret = -EINVAL;
+	}
+	if (siphash_4u64(0x0706050403020100ULL, 0x0f0e0d0c0b0a0908ULL,
+			 0x1716151413121110ULL, 0x1f1e1d1c1b1a1918ULL, test_key) != test_vectors[32]) {
+		pr_info("self-test 4u64: FAIL\n");
+		ret = -EINVAL;
+	}
+	if (siphash_1u32(0x03020100U, test_key) != test_vectors[4]) {
+		pr_info("self-test 1u32: FAIL\n");
+		ret = -EINVAL;
+	}
+	if (siphash_2u32(0x03020100U, 0x07060504U, test_key) != test_vectors[8]) {
+		pr_info("self-test 2u32: FAIL\n");
+		ret = -EINVAL;
+	}
+	if (siphash_3u32(0x03020100U, 0x07060504U,
+			 0x0b0a0908U, test_key) != test_vectors[12]) {
+		pr_info("self-test 3u32: FAIL\n");
+		ret = -EINVAL;
+	}
+	if (siphash_4u32(0x03020100U, 0x07060504U,
+			 0x0b0a0908U, 0x0f0e0d0cU, test_key) != test_vectors[16]) {
+		pr_info("self-test 4u32: FAIL\n");
+		ret = -EINVAL;
+	}
+	if (!ret)
+		pr_info("self-tests: pass\n");
+	return ret;
+}
+
+static void __exit siphash_test_exit(void)
+{
+}
+
+module_init(siphash_test_init);
+module_exit(siphash_test_exit);
+
+MODULE_AUTHOR("Jason A. Donenfeld <Jason@zx2c4.com>");
+MODULE_LICENSE("Dual BSD/GPL");
-- 
2.11.0

Re: [PATCH v7 1/6] siphash: add cryptographically secure PRF

[Stephen Hemminger]

On Thu, 22 Dec 2016 00:02:11 +0100
"Jason A. Donenfeld" <Jason@zx2c4.com> wrote:

> SipHash is a 64-bit keyed hash function that is actually a
> cryptographically secure PRF, like HMAC. Except SipHash is super fast,
> and is meant to be used as a hashtable keyed lookup function, or as a
> general PRF for short input use cases, such as sequence numbers or RNG
> chaining.
> 
> For the first usage:
> 
> There are a variety of attacks known as "hashtable poisoning" in which an
> attacker forms some data such that the hash of that data will be the
> same, and then preceeds to fill up all entries of a hashbucket. This is
> a realistic and well-known denial-of-service vector. Currently
> hashtables use jhash, which is fast but not secure, and some kind of
> rotating key scheme (or none at all, which isn't good). SipHash is meant
> as a replacement for jhash in these cases.
> 
> There are a modicum of places in the kernel that are vulnerable to
> hashtable poisoning attacks, either via userspace vectors or network
> vectors, and there's not a reliable mechanism inside the kernel at the
> moment to fix it. The first step toward fixing these issues is actually
> getting a secure primitive into the kernel for developers to use. Then
> we can, bit by bit, port things over to it as deemed appropriate.
> 
> While SipHash is extremely fast for a cryptographically secure function,
> it is likely a bit slower than the insecure jhash, and so replacements
> will be evaluated on a case-by-case basis based on whether or not the
> difference in speed is negligible and whether or not the current jhash usage
> poses a real security risk.
> 
> For the second usage:
> 
> A few places in the kernel are using MD5 or SHA1 for creating secure
> sequence numbers, syn cookies, port numbers, or fast random numbers.
> SipHash is a faster and more fitting, and more secure replacement for MD5
> in those situations. Replacing MD5 and SHA1 with SipHash for these uses is
> obvious and straight-forward, and so is submitted along with this patch
> series. There shouldn't be much of a debate over its efficacy.
> 
> Dozens of languages are already using this internally for their hash
> tables and PRFs. Some of the BSDs already use this in their kernels.
> SipHash is a widely known high-speed solution to a widely known set of
> problems, and it's time we catch-up.
> 
> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
> Cc: Jean-Philippe Aumasson <jeanphilippe.aumasson@gmail.com>
> Cc: Linus Torvalds <torvalds@linux-foundation.org>
> Cc: Eric Biggers <ebiggers3@gmail.com>
> Cc: David Laight <David.Laight@aculab.com>
> Cc: Eric Dumazet <eric.dumazet@gmail.com>

The networking tree (net-next) which is where you are submitting to is technically
closed right now.

[PATCH v7 2/6] secure_seq: use SipHash in place of MD5

[Jason A. Donenfeld]

This gives a clear speed and security improvement. Siphash is both
faster and is more solid crypto than the aging MD5.

Rather than manually filling MD5 buffers, for IPv6, we simply create
a layout by a simple anonymous struct, for which gcc generates
rather efficient code. For IPv4, we pass the values directly to the
short input convenience functions.

64-bit x86_64:
[    1.683628] secure_tcpv6_sequence_number_md5# cycles: 99563527
[    1.717350] secure_tcp_sequence_number_md5# cycles: 92890502
[    1.741968] secure_tcpv6_sequence_number_siphash# cycles: 67825362
[    1.762048] secure_tcp_sequence_number_siphash# cycles: 67485526

32-bit x86:
[    1.600012] secure_tcpv6_sequence_number_md5# cycles: 103227892
[    1.634219] secure_tcp_sequence_number_md5# cycles: 94732544
[    1.669102] secure_tcpv6_sequence_number_siphash# cycles: 96299384
[    1.700165] secure_tcp_sequence_number_siphash# cycles: 86015473

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Miller <davem@davemloft.net>
Cc: David Laight <David.Laight@aculab.com>
Cc: Tom Herbert <tom@herbertland.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
---
 net/core/secure_seq.c | 135 ++++++++++++++++++++------------------------------
 1 file changed, 54 insertions(+), 81 deletions(-)

diff --git a/net/core/secure_seq.c b/net/core/secure_seq.c
index 88a8e429fc3e..3dc2689bcc64 100644
--- a/net/core/secure_seq.c
+++ b/net/core/secure_seq.c
@@ -1,3 +1,5 @@
+/* Copyright (C) 2016 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved. */
+
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/cryptohash.h>
@@ -8,14 +10,14 @@
 #include <linux/ktime.h>
 #include <linux/string.h>
 #include <linux/net.h>
-
+#include <linux/siphash.h>
 #include <net/secure_seq.h>
 
 #if IS_ENABLED(CONFIG_IPV6) || IS_ENABLED(CONFIG_INET)
+#include <linux/in6.h>
 #include <net/tcp.h>
-#define NET_SECRET_SIZE (MD5_MESSAGE_BYTES / 4)
 
-static u32 net_secret[NET_SECRET_SIZE] ____cacheline_aligned;
+static siphash_key_t net_secret;
 
 static __always_inline void net_secret_init(void)
 {
@@ -44,80 +46,65 @@ static u32 seq_scale(u32 seq)
 u32 secure_tcpv6_sequence_number(const __be32 *saddr, const __be32 *daddr,
 				 __be16 sport, __be16 dport, u32 *tsoff)
 {
-	u32 secret[MD5_MESSAGE_BYTES / 4];
-	u32 hash[MD5_DIGEST_WORDS];
-	u32 i;
-
+	const struct {
+		struct in6_addr saddr;
+		struct in6_addr daddr;
+		__be16 sport;
+		__be16 dport;
+	} __aligned(SIPHASH_ALIGNMENT) combined = {
+		.saddr = *(struct in6_addr *)saddr,
+		.daddr = *(struct in6_addr *)daddr,
+		.sport = sport,
+		.dport = dport
+	};
+	u64 hash;
 	net_secret_init();
-	memcpy(hash, saddr, 16);
-	for (i = 0; i < 4; i++)
-		secret[i] = net_secret[i] + (__force u32)daddr[i];
-	secret[4] = net_secret[4] +
-		(((__force u16)sport << 16) + (__force u16)dport);
-	for (i = 5; i < MD5_MESSAGE_BYTES / 4; i++)
-		secret[i] = net_secret[i];
-
-	md5_transform(hash, secret);
-
-	*tsoff = sysctl_tcp_timestamps == 1 ? hash[1] : 0;
-	return seq_scale(hash[0]);
+	hash = siphash(&combined, offsetofend(typeof(combined), dport), net_secret);
+	*tsoff = sysctl_tcp_timestamps == 1 ? (hash >> 32) : 0;
+	return seq_scale(hash);
 }
 EXPORT_SYMBOL(secure_tcpv6_sequence_number);
 
 u32 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr,
 			       __be16 dport)
 {
-	u32 secret[MD5_MESSAGE_BYTES / 4];
-	u32 hash[MD5_DIGEST_WORDS];
-	u32 i;
-
+	const struct {
+		struct in6_addr saddr;
+		struct in6_addr daddr;
+		__be16 dport;
+	} __aligned(SIPHASH_ALIGNMENT) combined = {
+		.saddr = *(struct in6_addr *)saddr,
+		.daddr = *(struct in6_addr *)daddr,
+		.dport = dport
+	};
 	net_secret_init();
-	memcpy(hash, saddr, 16);
-	for (i = 0; i < 4; i++)
-		secret[i] = net_secret[i] + (__force u32) daddr[i];
-	secret[4] = net_secret[4] + (__force u32)dport;
-	for (i = 5; i < MD5_MESSAGE_BYTES / 4; i++)
-		secret[i] = net_secret[i];
-
-	md5_transform(hash, secret);
-
-	return hash[0];
+	return siphash(&combined, offsetofend(typeof(combined), dport), net_secret);
 }
 EXPORT_SYMBOL(secure_ipv6_port_ephemeral);
 #endif
 
 #ifdef CONFIG_INET
 
+/* secure_tcp_sequence_number(a, b, 0, d) == secure_ipv4_port_ephemeral(a, b, d),
+ * but fortunately, `sport' cannot be 0 in any circumstances. If this changes,
+ * it would be easy enough to have the former function use siphash_4u32, passing
+ * the arguments as separate u32.
+ */
+
 u32 secure_tcp_sequence_number(__be32 saddr, __be32 daddr,
 			       __be16 sport, __be16 dport, u32 *tsoff)
 {
-	u32 hash[MD5_DIGEST_WORDS];
-
+	u64 hash;
 	net_secret_init();
-	hash[0] = (__force u32)saddr;
-	hash[1] = (__force u32)daddr;
-	hash[2] = ((__force u16)sport << 16) + (__force u16)dport;
-	hash[3] = net_secret[15];
-
-	md5_transform(hash, net_secret);
-
-	*tsoff = sysctl_tcp_timestamps == 1 ? hash[1] : 0;
-	return seq_scale(hash[0]);
+	hash = siphash_3u32(saddr, daddr, (u32)sport << 16 | dport, net_secret);
+	*tsoff = sysctl_tcp_timestamps == 1 ? (hash >> 32) : 0;
+	return seq_scale(hash);
 }
 
 u32 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport)
 {
-	u32 hash[MD5_DIGEST_WORDS];
-
 	net_secret_init();
-	hash[0] = (__force u32)saddr;
-	hash[1] = (__force u32)daddr;
-	hash[2] = (__force u32)dport ^ net_secret[14];
-	hash[3] = net_secret[15];
-
-	md5_transform(hash, net_secret);
-
-	return hash[0];
+	return siphash_3u32(saddr, daddr, dport, net_secret);
 }
 EXPORT_SYMBOL_GPL(secure_ipv4_port_ephemeral);
 #endif
@@ -126,21 +113,11 @@ EXPORT_SYMBOL_GPL(secure_ipv4_port_ephemeral);
 u64 secure_dccp_sequence_number(__be32 saddr, __be32 daddr,
 				__be16 sport, __be16 dport)
 {
-	u32 hash[MD5_DIGEST_WORDS];
 	u64 seq;
-
 	net_secret_init();
-	hash[0] = (__force u32)saddr;
-	hash[1] = (__force u32)daddr;
-	hash[2] = ((__force u16)sport << 16) + (__force u16)dport;
-	hash[3] = net_secret[15];
-
-	md5_transform(hash, net_secret);
-
-	seq = hash[0] | (((u64)hash[1]) << 32);
+	seq = siphash_3u32(saddr, daddr, (u32)sport << 16 | dport, net_secret);
 	seq += ktime_get_real_ns();
 	seq &= (1ull << 48) - 1;
-
 	return seq;
 }
 EXPORT_SYMBOL(secure_dccp_sequence_number);
@@ -149,26 +126,22 @@ EXPORT_SYMBOL(secure_dccp_sequence_number);
 u64 secure_dccpv6_sequence_number(__be32 *saddr, __be32 *daddr,
 				  __be16 sport, __be16 dport)
 {
-	u32 secret[MD5_MESSAGE_BYTES / 4];
-	u32 hash[MD5_DIGEST_WORDS];
+	const struct {
+		struct in6_addr saddr;
+		struct in6_addr daddr;
+		__be16 sport;
+		__be16 dport;
+	} __aligned(SIPHASH_ALIGNMENT) combined = {
+		.saddr = *(struct in6_addr *)saddr,
+		.daddr = *(struct in6_addr *)daddr,
+		.sport = sport,
+		.dport = dport
+	};
 	u64 seq;
-	u32 i;
-
 	net_secret_init();
-	memcpy(hash, saddr, 16);
-	for (i = 0; i < 4; i++)
-		secret[i] = net_secret[i] + (__force u32)daddr[i];
-	secret[4] = net_secret[4] +
-		(((__force u16)sport << 16) + (__force u16)dport);
-	for (i = 5; i < MD5_MESSAGE_BYTES / 4; i++)
-		secret[i] = net_secret[i];
-
-	md5_transform(hash, secret);
-
-	seq = hash[0] | (((u64)hash[1]) << 32);
+	seq = siphash(&combined, offsetofend(typeof(combined), dport), net_secret);
 	seq += ktime_get_real_ns();
 	seq &= (1ull << 48) - 1;
-
 	return seq;
 }
 EXPORT_SYMBOL(secure_dccpv6_sequence_number);
-- 
2.11.0

[PATCH v7 3/6] random: use SipHash in place of MD5

[Jason A. Donenfeld]

This duplicates the current algorithm for get_random_int/long, but uses
siphash instead. This comes with several benefits. It's certainly
faster and more cryptographically secure than MD5. This patch also
separates hashed fields into three values instead of one, in order to
increase diffusion.

The previous MD5 algorithm used a per-cpu MD5 state, which caused
successive calls to the function to chain upon each other. While it's
not entirely clear that this kind of chaining is absolutely necessary
when using a secure PRF like siphash, it can't hurt, and the timing of
the call chain does add a degree of natural entropy. So, in keeping with
this design, instead of the massive per-cpu 64-byte MD5 state, there is
instead a per-cpu previously returned value for chaining.

The speed benefits are substantial:

                | siphash | md5    | speedup |
		------------------------------
get_random_long | 137130  | 415983 | 3.03x   |
get_random_int  | 86384   | 343323 | 3.97x   |

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Jean-Philippe Aumasson <jeanphilippe.aumasson@gmail.com>
Cc: Ted Tso <tytso@mit.edu>
---
 drivers/char/random.c  | 84 +++++++++++++++++++++++++++++---------------------
 include/linux/random.h |  1 -
 init/main.c            |  1 -
 3 files changed, 49 insertions(+), 37 deletions(-)

diff --git a/drivers/char/random.c b/drivers/char/random.c
index d6876d506220..ea9858d9d8b4 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -262,6 +262,7 @@
 #include <linux/syscalls.h>
 #include <linux/completion.h>
 #include <linux/uuid.h>
+#include <linux/siphash.h>
 #include <crypto/chacha20.h>
 
 #include <asm/processor.h>
@@ -2042,17 +2043,31 @@ struct ctl_table random_table[] = {
 };
 #endif 	/* CONFIG_SYSCTL */
 
-static u32 random_int_secret[MD5_MESSAGE_BYTES / 4] ____cacheline_aligned;
 
-int random_int_secret_init(void)
+struct random_int_secret {
+	siphash_key_t secret;
+	u64 chaining;
+	unsigned long birthdate;
+	bool initialized;
+};
+static DEFINE_PER_CPU(struct random_int_secret, random_int_secret);
+
+enum {
+	SECRET_ROTATION_TIME = HZ * 60 * 5
+};
+
+static struct random_int_secret *get_random_int_secret(void)
 {
-	get_random_bytes(random_int_secret, sizeof(random_int_secret));
-	return 0;
+	struct random_int_secret *secret = &get_cpu_var(random_int_secret);
+	if (unlikely(!secret->initialized ||
+		     !time_is_after_jiffies(secret->birthdate + SECRET_ROTATION_TIME))) {
+		secret->initialized = true;
+		secret->birthdate = jiffies;
+		get_random_bytes(secret->secret, sizeof(secret->secret));
+	}
+	return secret;
 }
 
-static DEFINE_PER_CPU(__u32 [MD5_DIGEST_WORDS], get_random_int_hash)
-		__aligned(sizeof(unsigned long));
-
 /*
  * Get a random word for internal kernel use only. Similar to urandom but
  * with the goal of minimal entropy pool depletion. As a result, the random
@@ -2061,20 +2076,20 @@ static DEFINE_PER_CPU(__u32 [MD5_DIGEST_WORDS], get_random_int_hash)
  */
 unsigned int get_random_int(void)
 {
-	__u32 *hash;
-	unsigned int ret;
-
-	if (arch_get_random_int(&ret))
-		return ret;
-
-	hash = get_cpu_var(get_random_int_hash);
-
-	hash[0] += current->pid + jiffies + random_get_entropy();
-	md5_transform(hash, random_int_secret);
-	ret = hash[0];
-	put_cpu_var(get_random_int_hash);
-
-	return ret;
+	unsigned int arch_result;
+	u64 result;
+	struct random_int_secret *secret;
+
+	if (arch_get_random_int(&arch_result))
+		return arch_result;
+
+	secret = get_random_int_secret();
+	result = siphash_3u64(secret->chaining, jiffies,
+			      (u64)random_get_entropy() + current->pid,
+			      secret->secret);
+	secret->chaining += result;
+	put_cpu_var(secret);
+	return result;
 }
 EXPORT_SYMBOL(get_random_int);
 
@@ -2083,20 +2098,19 @@ EXPORT_SYMBOL(get_random_int);
  */
 unsigned long get_random_long(void)
 {
-	__u32 *hash;
-	unsigned long ret;
-
-	if (arch_get_random_long(&ret))
-		return ret;
-
-	hash = get_cpu_var(get_random_int_hash);
-
-	hash[0] += current->pid + jiffies + random_get_entropy();
-	md5_transform(hash, random_int_secret);
-	ret = *(unsigned long *)hash;
-	put_cpu_var(get_random_int_hash);
-
-	return ret;
+	unsigned long arch_result;
+	u64 result;
+	struct random_int_secret *secret;
+
+	if (arch_get_random_long(&arch_result))
+		return arch_result;
+
+	secret = get_random_int_secret();
+	result = siphash_3u64(secret->chaining, jiffies, random_get_entropy() +
+			      current->pid, secret->secret);
+	secret->chaining += result;
+	put_cpu_var(secret);
+	return result;
 }
 EXPORT_SYMBOL(get_random_long);
 
diff --git a/include/linux/random.h b/include/linux/random.h
index 7bd2403e4fef..16ab429735a7 100644
--- a/include/linux/random.h
+++ b/include/linux/random.h
@@ -37,7 +37,6 @@ extern void get_random_bytes(void *buf, int nbytes);
 extern int add_random_ready_callback(struct random_ready_callback *rdy);
 extern void del_random_ready_callback(struct random_ready_callback *rdy);
 extern void get_random_bytes_arch(void *buf, int nbytes);
-extern int random_int_secret_init(void);
 
 #ifndef MODULE
 extern const struct file_operations random_fops, urandom_fops;
diff --git a/init/main.c b/init/main.c
index 23c275cca73a..a3af9296cafd 100644
--- a/init/main.c
+++ b/init/main.c
@@ -879,7 +879,6 @@ static void __init do_basic_setup(void)
 	do_ctors();
 	usermodehelper_enable();
 	do_initcalls();
-	random_int_secret_init();
 }
 
 static void __init do_pre_smp_initcalls(void)
-- 
2.11.0

Re: [PATCH v7 3/6] random: use SipHash in place of MD5

[Jason A. Donenfeld]

Hi Ted,

On Thu, Dec 22, 2016 at 12:02 AM, Jason A. Donenfeld <Jason@zx2c4.com> wrote:
> This duplicates the current algorithm for get_random_int/long

I should have mentioned this directly in the commit message, which I
forgot to update: this v7 adds the time-based key rotation, which,
while not strictly necessary for ensuring the security of the RNG,
might help alleviate some concerns, as we talked about. Performance is
quite good on both 32-bit and 64-bit -- better than MD5 in both cases.

If you like this, terrific. If not, I'm happy to take this in whatever
direction you prefer, and implement whatever construction you think
best. There's been a lot of noise on this list about it; we can
continue to discuss more, or you can just tell me whatever you want to
do, and I'll implement it and that'll be the end of it. As you said,
we can always get something decent now and improve it later.

Alternatively, if you've decided in the end you prefer your batched
entropy approach using chacha, I'm happy to implement a polished
version of that here in this patch series (so that we can keep the `rm
lib/md5.c` commit.)

Just let me know how you'd like to proceed.

Thanks,
Jason

Re: [PATCH v7 3/6] random: use SipHash in place of MD5

[Andy Lutomirski]

On Wed, Dec 21, 2016 at 3:02 PM, Jason A. Donenfeld <Jason@zx2c4.com> wrote:
>  unsigned int get_random_int(void)
>  {
> -       __u32 *hash;
> -       unsigned int ret;
> -
> -       if (arch_get_random_int(&ret))
> -               return ret;
> -
> -       hash = get_cpu_var(get_random_int_hash);
> -
> -       hash[0] += current->pid + jiffies + random_get_entropy();
> -       md5_transform(hash, random_int_secret);
> -       ret = hash[0];
> -       put_cpu_var(get_random_int_hash);
> -
> -       return ret;
> +       unsigned int arch_result;
> +       u64 result;
> +       struct random_int_secret *secret;
> +
> +       if (arch_get_random_int(&arch_result))
> +               return arch_result;
> +
> +       secret = get_random_int_secret();
> +       result = siphash_3u64(secret->chaining, jiffies,
> +                             (u64)random_get_entropy() + current->pid,
> +                             secret->secret);
> +       secret->chaining += result;
> +       put_cpu_var(secret);
> +       return result;
>  }
>  EXPORT_SYMBOL(get_random_int);

Hmm.  I haven't tried to prove anything for real.  But here goes (in
the random oracle model):

Suppose I'm an attacker and I don't know the secret or the chaining
value.  Then, regardless of what the entropy is, I can't predict the
numbers.

Now suppose I do know the secret and the chaining value due to some
leak.  If I want to deduce prior outputs, I think I'm stuck: I'd need
to find a value "result" such that prev_chaining + result = chaining
and result = H(prev_chaining, ..., secret);.  I don't think this can
be done efficiently in the random oracle model regardless of what the
"..." is.

But, if I know the secret and chaining value, I can predict the next
output assuming I can guess the entropy.  What's worse is that, even
if I can't guess the entropy, if I *observe* the next output then I
can calculate the next chaining value.

So this is probably good enough, and making it better is hard.  Changing it to:

u64 entropy = (u64)random_get_entropy() + current->pid;
result = siphash(..., entropy, ...);
secret->chaining += result + entropy;

would reduce this problem by forcing an attacker to brute-force the
entropy on each iteration, which is probably an improvement.

To fully fix it, something like "catastrophic reseeding" would be
needed, but that's hard to get right.

(An aside: on x86 at least, using two percpu variables is faster
because directly percpu access is essentially free, whereas getting
the address of a percpu variable is not free.)

Re: [PATCH v7 3/6] random: use SipHash in place of MD5

[Hannes Frederic Sowa]

On 22.12.2016 00:42, Andy Lutomirski wrote:
> On Wed, Dec 21, 2016 at 3:02 PM, Jason A. Donenfeld <Jason@zx2c4.com> wrote:
>>  unsigned int get_random_int(void)
>>  {
>> -       __u32 *hash;
>> -       unsigned int ret;
>> -
>> -       if (arch_get_random_int(&ret))
>> -               return ret;
>> -
>> -       hash = get_cpu_var(get_random_int_hash);
>> -
>> -       hash[0] += current->pid + jiffies + random_get_entropy();
>> -       md5_transform(hash, random_int_secret);
>> -       ret = hash[0];
>> -       put_cpu_var(get_random_int_hash);
>> -
>> -       return ret;
>> +       unsigned int arch_result;
>> +       u64 result;
>> +       struct random_int_secret *secret;
>> +
>> +       if (arch_get_random_int(&arch_result))
>> +               return arch_result;
>> +
>> +       secret = get_random_int_secret();
>> +       result = siphash_3u64(secret->chaining, jiffies,
>> +                             (u64)random_get_entropy() + current->pid,
>> +                             secret->secret);
>> +       secret->chaining += result;
>> +       put_cpu_var(secret);
>> +       return result;
>>  }
>>  EXPORT_SYMBOL(get_random_int);
> 
> Hmm.  I haven't tried to prove anything for real.  But here goes (in
> the random oracle model):
> 
> Suppose I'm an attacker and I don't know the secret or the chaining
> value.  Then, regardless of what the entropy is, I can't predict the
> numbers.
> 
> Now suppose I do know the secret and the chaining value due to some
> leak.  If I want to deduce prior outputs, I think I'm stuck: I'd need
> to find a value "result" such that prev_chaining + result = chaining
> and result = H(prev_chaining, ..., secret);.  I don't think this can
> be done efficiently in the random oracle model regardless of what the
> "..." is.
> 
> But, if I know the secret and chaining value, I can predict the next
> output assuming I can guess the entropy.  What's worse is that, even
> if I can't guess the entropy, if I *observe* the next output then I
> can calculate the next chaining value.
> 
> So this is probably good enough, and making it better is hard.  Changing it to:
> 
> u64 entropy = (u64)random_get_entropy() + current->pid;
> result = siphash(..., entropy, ...);
> secret->chaining += result + entropy;
> 
> would reduce this problem by forcing an attacker to brute-force the
> entropy on each iteration, which is probably an improvement.
> 
> To fully fix it, something like "catastrophic reseeding" would be
> needed, but that's hard to get right.

I wonder if Ted's proposal was analyzed further in terms of performance
if get_random_int should provide cprng alike properties?

For reference: https://lkml.org/lkml/2016/12/14/351

The proposal made sense to me and would completely solve the above
mentioned problem on the cost of repeatedly reseeding from the crng.

Bye,
Hannes

Re: [PATCH v7 3/6] random: use SipHash in place of MD5

[Andy Lutomirski]

On Wed, Dec 21, 2016 at 6:07 PM, Hannes Frederic Sowa
<hannes@stressinduktion.org> wrote:
> On 22.12.2016 00:42, Andy Lutomirski wrote:
>> On Wed, Dec 21, 2016 at 3:02 PM, Jason A. Donenfeld <Jason@zx2c4.com> wrote:
>>>  unsigned int get_random_int(void)
>>>  {
>>> -       __u32 *hash;
>>> -       unsigned int ret;
>>> -
>>> -       if (arch_get_random_int(&ret))
>>> -               return ret;
>>> -
>>> -       hash = get_cpu_var(get_random_int_hash);
>>> -
>>> -       hash[0] += current->pid + jiffies + random_get_entropy();
>>> -       md5_transform(hash, random_int_secret);
>>> -       ret = hash[0];
>>> -       put_cpu_var(get_random_int_hash);
>>> -
>>> -       return ret;
>>> +       unsigned int arch_result;
>>> +       u64 result;
>>> +       struct random_int_secret *secret;
>>> +
>>> +       if (arch_get_random_int(&arch_result))
>>> +               return arch_result;
>>> +
>>> +       secret = get_random_int_secret();
>>> +       result = siphash_3u64(secret->chaining, jiffies,
>>> +                             (u64)random_get_entropy() + current->pid,
>>> +                             secret->secret);
>>> +       secret->chaining += result;
>>> +       put_cpu_var(secret);
>>> +       return result;
>>>  }
>>>  EXPORT_SYMBOL(get_random_int);
>>
>> Hmm.  I haven't tried to prove anything for real.  But here goes (in
>> the random oracle model):
>>
>> Suppose I'm an attacker and I don't know the secret or the chaining
>> value.  Then, regardless of what the entropy is, I can't predict the
>> numbers.
>>
>> Now suppose I do know the secret and the chaining value due to some
>> leak.  If I want to deduce prior outputs, I think I'm stuck: I'd need
>> to find a value "result" such that prev_chaining + result = chaining
>> and result = H(prev_chaining, ..., secret);.  I don't think this can
>> be done efficiently in the random oracle model regardless of what the
>> "..." is.
>>
>> But, if I know the secret and chaining value, I can predict the next
>> output assuming I can guess the entropy.  What's worse is that, even
>> if I can't guess the entropy, if I *observe* the next output then I
>> can calculate the next chaining value.
>>
>> So this is probably good enough, and making it better is hard.  Changing it to:
>>
>> u64 entropy = (u64)random_get_entropy() + current->pid;
>> result = siphash(..., entropy, ...);
>> secret->chaining += result + entropy;
>>
>> would reduce this problem by forcing an attacker to brute-force the
>> entropy on each iteration, which is probably an improvement.
>>
>> To fully fix it, something like "catastrophic reseeding" would be
>> needed, but that's hard to get right.
>
> I wonder if Ted's proposal was analyzed further in terms of performance
> if get_random_int should provide cprng alike properties?
>
> For reference: https://lkml.org/lkml/2016/12/14/351
>
> The proposal made sense to me and would completely solve the above
> mentioned problem on the cost of repeatedly reseeding from the crng.
>

Unless I've misunderstood it, Ted's proposal causes get_random_int()
to return bytes straight from urandom (effectively), which should make
it very strong.  And if urandom is competitively fast now, I don't see
the problem.  ChaCha20 is designed for speed, after all.

Re: [PATCH v7 3/6] random: use SipHash in place of MD5

[Jason A. Donenfeld]

Hi Andy & Hannes,

On Thu, Dec 22, 2016 at 3:07 AM, Hannes Frederic Sowa
<hannes@stressinduktion.org> wrote:
> I wonder if Ted's proposal was analyzed further in terms of performance
> if get_random_int should provide cprng alike properties?
>
> For reference: https://lkml.org/lkml/2016/12/14/351
>
> The proposal made sense to me and would completely solve the above
> mentioned problem on the cost of repeatedly reseeding from the crng.

On Thu, Dec 22, 2016 at 3:09 AM, Andy Lutomirski <luto@amacapital.net> wrote:
> Unless I've misunderstood it, Ted's proposal causes get_random_int()
> to return bytes straight from urandom (effectively), which should make
> it very strong.  And if urandom is competitively fast now, I don't see
> the problem.  ChaCha20 is designed for speed, after all.

Funny -- while you guys were sending this back & forth, I was writing
my reply to Andy which essentially arrives at the same conclusion.
Given that we're all arriving to the same thing, and that Ted shot in
this direction long before we all did, I'm leaning toward abandoning
SipHash for the de-MD5-ification of get_random_int/long, and working
on polishing Ted's idea into something shiny for this patchset.

I did have two objections to this. The first was that my SipHash
construction is faster. But in any case, they're both faster than the
current MD5, so it's just extra rice. The second, and the more
important one, was that batching entropy up like this means that 32
calls will be really fast, and then the 33rd will be slow, since it
has to do a whole ChaCha round, because get_random_bytes must be
called to refill the batch. Since get_random_long is called for every
process startup, I didn't really like there being inconsistent
performance on process startup. And I'm pretty sure that one ChaCha
whole block is slower than computing MD5, even though it lasts 32
times as long, though I need to measure this. But maybe that's dumb in
the end? Are these concerns that should point us toward the
determinism (and speed) of SipHash? Are these concerns that don't
matter and so we should roll with the simplicity of reusing ChaCha?

Jason

Re: [PATCH v7 3/6] random: use SipHash in place of MD5

[Jason A. Donenfeld]

On Thu, Dec 22, 2016 at 3:49 AM, Jason A. Donenfeld <Jason@zx2c4.com> wrote:
> I did have two objections to this. The first was that my SipHash
> construction is faster. But in any case, they're both faster than the
> current MD5, so it's just extra rice. The second, and the more
> important one, was that batching entropy up like this means that 32
> calls will be really fast, and then the 33rd will be slow, since it
> has to do a whole ChaCha round, because get_random_bytes must be
> called to refill the batch. Since get_random_long is called for every
> process startup, I didn't really like there being inconsistent
> performance on process startup. And I'm pretty sure that one ChaCha
> whole block is slower than computing MD5, even though it lasts 32
> times as long, though I need to measure this. But maybe that's dumb in
> the end? Are these concerns that should point us toward the
> determinism (and speed) of SipHash? Are these concerns that don't
> matter and so we should roll with the simplicity of reusing ChaCha?

I ran some measurements in order to quantify what I'm talking about.
Repeatedly running md5_transform is about 2.3 times faster than
repeatedly running extract_crng. What does this mean?

One call to extract_crng gives us 32 times as many longs as one call
to md5_transform. This means that spread over 32 process creations,
chacha will be 13.9 times faster. However, every 32nd process will
take 2.3 times as long to generate its ASLR value as it would with the
old md5_transform code.

Personally, I don't think that 2.3 is a big deal. And I really like
how much this simplifies the analysis.
But if it's a big deal to you, then we can continue to discuss my
SipHash construction, which gives faster and more consistent
performance, at the cost of a more complicated and probably less
impressive security analysis.

Jason

Re: [kernel-hardening] Re: [PATCH v7 3/6] random: use SipHash in place of MD5

[Theodore Ts'o]

On Thu, Dec 22, 2016 at 03:49:39AM +0100, Jason A. Donenfeld wrote:
> 
> Funny -- while you guys were sending this back & forth, I was writing
> my reply to Andy which essentially arrives at the same conclusion.
> Given that we're all arriving to the same thing, and that Ted shot in
> this direction long before we all did, I'm leaning toward abandoning
> SipHash for the de-MD5-ification of get_random_int/long, and working
> on polishing Ted's idea into something shiny for this patchset.

here are my numbers comparing siphash (using the first three patches
of the v7 siphash patches) with my batched chacha20 implementation.
The results are taken by running get_random_* 10000 times, and then
dividing the numbers by 10000 to get the average number of cycles for
the call.  I compiled 32-bit and 64-bit kernels, and ran the results
using kvm:

                   siphash                        batched chacha20
         get_random_int  get_random_long   get_random_int   get_random_long   

32-bit    270                  278             114            146
64-bit     75                   75             106            186

> I did have two objections to this. The first was that my SipHash
> construction is faster.

Well, it's faster on everything except 32-bit x86.  :-P

> The second, and the more
> important one, was that batching entropy up like this means that 32
> calls will be really fast, and then the 33rd will be slow, since it
> has to do a whole ChaCha round, because get_random_bytes must be
> called to refill the batch.

... and this will take 2121 cycles on 64-bit x86, and 2315 cycles on a
32-bit x86.  Which on a 2.3 GHz processor, is just under a
microsecond.  As far as being inconsistent on process startup, I very
much doubt a microsecond is really going to be visible to the user.  :-)

The bottom line is that I think we're really "pixel peeping" at this
point --- which is what obsessed digital photographers will do when
debating the quality of a Canon vs Nikon DSLR by blowing up a photo by
a thousand times, and then trying to claim that this is visible to the
human eye.  Or people who obsessing over the frequency response curves
of TH-X00 headphones with Mahogony vs Purpleheart wood, when it's
likely that in a blind head-to-head comparison, most people wouldn't
be able to tell the difference....

I think the main argument for using the batched getrandom approach is
that it, I would argue, simpler than introducing siphash into the
picture.  On 64-bit platforms it is faster and more consistent, so
it's basically that versus complexity of having to adding siphash to
the things that people have to analyze when considering random number
security on Linux.   But it's a close call either way, I think.

	    	     	      	      - Ted

P.S.  My benchmarking code....

diff --git a/drivers/char/random.c b/drivers/char/random.c
index a51f0ff43f00..41860864b775 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -1682,6 +1682,55 @@ static int rand_initialize(void)
 }
 early_initcall(rand_initialize);
 
+static unsigned int get_random_int_new(void);
+static unsigned long get_random_long_new(void);
+
+#define NUM_CYCLES 10000
+#define AVG(finish, start) ((unsigned int)(finish - start + NUM_CYCLES/2) / NUM_CYCLES)
+
+static int rand_benchmark(void)
+{
+	cycles_t start,finish;
+	int i, out;
+
+	pr_crit("random benchmark!!\n");
+	start = get_cycles();
+	for (i = 0; i < NUM_CYCLES; i++) {
+		get_random_int();}
+	finish = get_cycles();
+	pr_err("get_random_int # cycles: %u\n", AVG(finish, start));
+
+	start = get_cycles();
+	for (i = 0; i < NUM_CYCLES; i++) {
+		get_random_int_new();
+	}
+	finish = get_cycles();
+	pr_err("get_random_int_new (batched chacha20) # cycles: %u\n", AVG(finish, start));
+
+	start = get_cycles();
+	for (i = 0; i < NUM_CYCLES; i++) {
+		get_random_long();
+	}
+	finish = get_cycles();
+	pr_err("get_random_long # cycles: %u\n", AVG(finish, start));
+
+	start = get_cycles();
+	for (i = 0; i < NUM_CYCLES; i++) {
+		get_random_long_new();
+	}
+	finish = get_cycles();
+	pr_err("get_random_long_new (batched chacha20) # cycles: %u\n", AVG(finish, start));
+
+	start = get_cycles();
+	for (i = 0; i < NUM_CYCLES; i++) {
+		get_random_bytes(&out, sizeof(out));
+	}
+	finish = get_cycles();
+	pr_err("get_random_bytes # cycles: %u\n", AVG(finish, start));
+	return 0;
+}
+device_initcall(rand_benchmark);
+
 #ifdef CONFIG_BLOCK
 void rand_initialize_disk(struct gendisk *disk)
 {
@@ -2064,8 +2113,10 @@ unsigned int get_random_int(void)
 	unsigned int ret;
 	u64 *chaining;
 
+#if 0	// force slow path
 	if (arch_get_random_int(&ret))
 		return ret;
+#endif
 
 	chaining = &get_cpu_var(get_random_int_chaining);
 	ret = *chaining = siphash_3u64(*chaining, jiffies, random_get_entropy() +
@@ -2083,8 +2134,10 @@ unsigned long get_random_long(void)
 	unsigned long ret;
 	u64 *chaining;
 
+#if 0 // force slow path
 	if (arch_get_random_long(&ret))
 		return ret;
+#endif 
 
 	chaining = &get_cpu_var(get_random_int_chaining);
 	ret = *chaining = siphash_3u64(*chaining, jiffies, random_get_entropy() +
@@ -2094,6 +2147,47 @@ unsigned long get_random_long(void)
 }
 EXPORT_SYMBOL(get_random_long);
 
+struct random_buf {
+	__u8 buf[CHACHA20_BLOCK_SIZE];
+	int ptr;
+};
+
+static DEFINE_PER_CPU(struct random_buf, batched_entropy);
+
+static void get_batched_entropy(void *buf, int n)
+{
+	struct random_buf *p;
+
+	p = &get_cpu_var(batched_entropy);
+
+	if ((p->ptr == 0) ||
+	    (p->ptr + n >= CHACHA20_BLOCK_SIZE)) {
+		extract_crng(p->buf);
+		p->ptr = 0;
+	}
+	BUG_ON(n > CHACHA20_BLOCK_SIZE);
+	memcpy(buf, p->buf, n);
+	p->ptr += n;
+	put_cpu_var(batched_entropy);
+}
+
+static unsigned int get_random_int_new(void)
+{
+	unsigned int ret;
+
+	get_batched_entropy(&ret, sizeof(ret));
+	return ret;
+}
+
+static unsigned long get_random_long_new(void)
+{
+	unsigned long ret;
+
+	get_batched_entropy(&ret, sizeof(ret));
+	return ret;
+}
+
+
 /**
  * randomize_page - Generate a random, page aligned address
  * @start:	The smallest acceptable address the caller will take.

Re: [kernel-hardening] Re: [PATCH v7 3/6] random: use SipHash in place of MD5

[Jason A. Donenfeld]

Hi Ted,

On Thu, Dec 22, 2016 at 6:41 AM, Theodore Ts'o <tytso@mit.edu> wrote:
> The bottom line is that I think we're really "pixel peeping" at this
> point --- which is what obsessed digital photographers will do when
> debating the quality of a Canon vs Nikon DSLR by blowing up a photo by
> a thousand times, and then trying to claim that this is visible to the
> human eye.  Or people who obsessing over the frequency response curves
> of TH-X00 headphones with Mahogony vs Purpleheart wood, when it's
> likely that in a blind head-to-head comparison, most people wouldn't
> be able to tell the difference....

This is hilarious, thanks for the laugh. I believe you're right about this...

>
> I think the main argument for using the batched getrandom approach is
> that it, I would argue, simpler than introducing siphash into the
> picture.  On 64-bit platforms it is faster and more consistent, so
> it's basically that versus complexity of having to adding siphash to
> the things that people have to analyze when considering random number
> security on Linux.   But it's a close call either way, I think.

I find this compelling. We'll have one csprng for both
get_random_int/long and for /dev/urandom, and we'll be able to update
that silly warning on the comment of get_random_int/long to read
"gives output of either rdrand quality or of /dev/urandom quality",
which makes it more useful for other things. It introduces less error
prone code, and it lets the RNG analysis be spent on just one RNG, not
two.

So, with your blessing, I'm going to move ahead with implementing a
pretty version of this for v8.

Regards,
Jason

Re: [kernel-hardening] Re: [PATCH v7 3/6] random: use SipHash in place of MD5

[Theodore Ts'o]

On Thu, Dec 22, 2016 at 07:03:29AM +0100, Jason A. Donenfeld wrote:
> I find this compelling. We'll have one csprng for both
> get_random_int/long and for /dev/urandom, and we'll be able to update
> that silly warning on the comment of get_random_int/long to read
> "gives output of either rdrand quality or of /dev/urandom quality",
> which makes it more useful for other things. It introduces less error
> prone code, and it lets the RNG analysis be spent on just one RNG, not
> two.
> 
> So, with your blessing, I'm going to move ahead with implementing a
> pretty version of this for v8.

Can we do this as a separate series, please?  At this point, it's a
completely separate change from a logical perspective, and we can take
in the change through the random.git tree.

Changes that touch files that are normally changed in several
different git trees leads to the potential for merge conflicts during
the linux-next integration and merge window processes.  Which is why
it's generally best to try to isolate changes as much as possible.

Cheers,

						- Ted

Re: [kernel-hardening] Re: [PATCH v7 3/6] random: use SipHash in place of MD5

[Jason A. Donenfeld]

Hi Ted,

On Thu, Dec 22, 2016 at 4:58 PM, Theodore Ts'o <tytso@mit.edu> wrote:
> Can we do this as a separate series, please?  At this point, it's a
> completely separate change from a logical perspective, and we can take
> in the change through the random.git tree.
>
> Changes that touch files that are normally changed in several
> different git trees leads to the potential for merge conflicts during
> the linux-next integration and merge window processes.  Which is why
> it's generally best to try to isolate changes as much as possible.

Sure, I can separate things out.

Could you offer a bit of advice on how to manage dependencies between
patchsets during merge windows? I'm a bit new to the process.

Specifically, we how have 4 parts:
1. add siphash, and use it for some networking code. to: david miller's net-next
2. convert char/random to use siphash. to: ted ts'o's random-next
3. move lib/md5.c to static function in crypto/md5.c, remove entry
inside of linux/cryptohash.h. to: ??'s ??-next
4. move lib/halfmd4.c to static function in fs/ext/hash.c, remove
entry inside of linux/cryptohash.c. to: td ts'o's ext-next

Problem: 2 depends on 1, 3 depends on 1 & 2. But this can be
simplified into 3 parts:

1. add siphash, and use it for some networking code. to: david miller's net-next
2. convert char/random to use siphash, move lib/md5.c to static
function in crypto/md5.c, remove entry inside of linux/cryptohash.h.
to: ted ts'o's random-next
3. move lib/halfmd4.c to static function in fs/ext/hash.c, remove
entry inside of linux/cryptohash.c. to: td ts'o's ext-next

Problem: 2 depends on 1. Is that okay with you?

Also, would you like me to merge (3) and (2) of the second list into
one series for you?

Jason

Re: [kernel-hardening] Re: [PATCH v7 3/6] random: use SipHash in place of MD5

[Theodore Ts'o]

On Thu, Dec 22, 2016 at 05:16:47PM +0100, Jason A. Donenfeld wrote:
> Could you offer a bit of advice on how to manage dependencies between
> patchsets during merge windows? I'm a bit new to the process.
> 
> Specifically, we how have 4 parts:
> 1. add siphash, and use it for some networking code. to: david miller's net-next

I'd do this first, as one set.  Adding a new file to crypto is
unlikely to cause merge conflicts.

> 2. convert char/random to use siphash. to: ted ts'o's random-next

I'm confused, I thought you had agreed to the batched chacha20
approach?

> 3. move lib/md5.c to static function in crypto/md5.c, remove entry
> inside of linux/cryptohash.h. to: ??'s ??-next

This is cleanup, so it doesn't matter that much when it happens.  md5
changes to crypto is also unlikely to cause conflicts, so we could do
this at the same time as (2), if Herbert (the crypto maintainer) agrees.

> 4. move lib/halfmd4.c to static function in fs/ext/hash.c, remove
> entry inside of linux/cryptohash.c. to: td ts'o's ext-next

This is definitely separate.

One more thing.  Can you add some test cases to lib/siphash.h?
Triggered off of a CONFIG_SIPHASH_REGRESSION_TEST config flag, with
some test inputs and known outputs?  I'm going to need to add a
version of siphash to e2fsprogs, and I want to make sure the userspace
version is implementing the same algorithm as the kernel siphash.

	   		    	 	      - Ted

Re: [kernel-hardening] Re: [PATCH v7 3/6] random: use SipHash in place of MD5

[Jason A. Donenfeld]

On Thu, Dec 22, 2016 at 5:30 PM, Theodore Ts'o <tytso@mit.edu> wrote:
> I'd do this first, as one set.  Adding a new file to crypto is
> unlikely to cause merge conflicts.

Ack.

>
>> 2. convert char/random to use siphash. to: ted ts'o's random-next
>
> I'm confused, I thought you had agreed to the batched chacha20
> approach?

Sorry, I meant to write this. Long day, little sleep. Yes, of course.
Batched entropy.

>> 3. move lib/md5.c to static function in crypto/md5.c, remove entry
>> inside of linux/cryptohash.h. to: ??'s ??-next
>
> This is cleanup, so it doesn't matter that much when it happens.  md5
> changes to crypto is also unlikely to cause conflicts, so we could do
> this at the same time as (2), if Herbert (the crypto maintainer) agrees.

Alright, sure.

>
>> 4. move lib/halfmd4.c to static function in fs/ext/hash.c, remove
>> entry inside of linux/cryptohash.c. to: td ts'o's ext-next
>
> This is definitely separate.

Okay, I'll submit it to you separately.

> One more thing.  Can you add some test cases to lib/siphash.h?
> Triggered off of a CONFIG_SIPHASH_REGRESSION_TEST config flag, with
> some test inputs and known outputs?  I'm going to need to add a
> version of siphash to e2fsprogs, and I want to make sure the userspace
> version is implementing the same algorithm as the kernel siphash.

I've already written these. They're behind TEST_HASH. They currently
test every single line of code of all implementations of siphash. I
spent a long time on these. The test vectors themselves were taken
from the SipHash creators' reference publication. Check out
lib/test_siphash.c in my tree.

Jason

On Thu, Dec 22, 2016 at 5:30 PM, Theodore Ts'o <tytso@mit.edu> wrote:
> On Thu, Dec 22, 2016 at 05:16:47PM +0100, Jason A. Donenfeld wrote:
>> Could you offer a bit of advice on how to manage dependencies between
>> patchsets during merge windows? I'm a bit new to the process.
>>
>> Specifically, we how have 4 parts:
>> 1. add siphash, and use it for some networking code. to: david miller's net-next
>
> I'd do this first, as one set.  Adding a new file to crypto is
> unlikely to cause merge conflicts.
>
>> 2. convert char/random to use siphash. to: ted ts'o's random-next
>
> I'm confused, I thought you had agreed to the batched chacha20
> approach?
>
>> 3. move lib/md5.c to static function in crypto/md5.c, remove entry
>> inside of linux/cryptohash.h. to: ??'s ??-next
>
> This is cleanup, so it doesn't matter that much when it happens.  md5
> changes to crypto is also unlikely to cause conflicts, so we could do
> this at the same time as (2), if Herbert (the crypto maintainer) agrees.
>
>> 4. move lib/halfmd4.c to static function in fs/ext/hash.c, remove
>> entry inside of linux/cryptohash.c. to: td ts'o's ext-next
>
> This is definitely separate.
>
> One more thing.  Can you add some test cases to lib/siphash.h?
> Triggered off of a CONFIG_SIPHASH_REGRESSION_TEST config flag, with
> some test inputs and known outputs?  I'm going to need to add a
> version of siphash to e2fsprogs, and I want to make sure the userspace
> version is implementing the same algorithm as the kernel siphash.
>
>                                               - Ted



-- 
Jason A. Donenfeld
Deep Space Explorer
fr: +33 6 51 90 82 66
us: +1 513 476 1200
www.jasondonenfeld.com
www.zx2c4.com
zx2c4.com/keys/AB9942E6D4A4CFC3412620A749FC7012A5DE03AE.asc

Re: [kernel-hardening] Re: [PATCH v7 3/6] random: use SipHash in place of MD5

[Hannes Frederic Sowa]

Hi Ted,

On Thu, 2016-12-22 at 00:41 -0500, Theodore Ts'o wrote:
> On Thu, Dec 22, 2016 at 03:49:39AM +0100, Jason A. Donenfeld wrote:
> > 
> > Funny -- while you guys were sending this back & forth, I was writing
> > my reply to Andy which essentially arrives at the same conclusion.
> > Given that we're all arriving to the same thing, and that Ted shot in
> > this direction long before we all did, I'm leaning toward abandoning
> > SipHash for the de-MD5-ification of get_random_int/long, and working
> > on polishing Ted's idea into something shiny for this patchset.
> 
> here are my numbers comparing siphash (using the first three patches
> of the v7 siphash patches) with my batched chacha20 implementation.
> The results are taken by running get_random_* 10000 times, and then
> dividing the numbers by 10000 to get the average number of cycles for
> the call.  I compiled 32-bit and 64-bit kernels, and ran the results
> using kvm:
> 
>                    siphash                        batched chacha20
>          get_random_int  get_random_long   get_random_int   get_random_long   
> 
> 32-bit    270                  278             114            146
> 64-bit     75                   75             106            186
> 
> > I did have two objections to this. The first was that my SipHash
> > construction is faster.
> 
> Well, it's faster on everything except 32-bit x86.  :-P
> 
> > The second, and the more
> > important one, was that batching entropy up like this means that 32
> > calls will be really fast, and then the 33rd will be slow, since it
> > has to do a whole ChaCha round, because get_random_bytes must be
> > called to refill the batch.
> 
> ... and this will take 2121 cycles on 64-bit x86, and 2315 cycles on a
> 32-bit x86.  Which on a 2.3 GHz processor, is just under a
> microsecond.  As far as being inconsistent on process startup, I very
> much doubt a microsecond is really going to be visible to the user.  :-)
> 
> The bottom line is that I think we're really "pixel peeping" at this
> point --- which is what obsessed digital photographers will do when
> debating the quality of a Canon vs Nikon DSLR by blowing up a photo by
> a thousand times, and then trying to claim that this is visible to the
> human eye.  Or people who obsessing over the frequency response curves
> of TH-X00 headphones with Mahogony vs Purpleheart wood, when it's
> likely that in a blind head-to-head comparison, most people wouldn't
> be able to tell the difference....
> 
> I think the main argument for using the batched getrandom approach is
> that it, I would argue, simpler than introducing siphash into the
> picture.  On 64-bit platforms it is faster and more consistent, so
> it's basically that versus complexity of having to adding siphash to
> the things that people have to analyze when considering random number
> security on Linux.   But it's a close call either way, I think.

following up on what appears to be a random subject: ;)

IIRC, ext4 code by default still uses half_md4 for hashing of filenames
in the htree. siphash seems to fit this use case pretty good.

xfs could also need an update, as they don't seed the directory hash
tables at all (but not sure if they are vulnerable). I should improve
[1] a bit.

[1] http://oss.sgi.com/cgi-bin/gitweb.cgi?p=xfs/cmds/xfstests.git;a=blo
b;f=src/dirhash_collide.c;h=55cec872d5061ac2ca0f56d1f11e6bf349d5bb97;hb
=HEAD

Bye,
Hannes

Re: [kernel-hardening] Re: [PATCH v7 3/6] random: use SipHash in place of MD5

[Jason A. Donenfeld]

On Thu, Dec 22, 2016 at 1:47 PM, Hannes Frederic Sowa
<hannes@stressinduktion.org> wrote:
> following up on what appears to be a random subject: ;)
>
> IIRC, ext4 code by default still uses half_md4 for hashing of filenames
> in the htree. siphash seems to fit this use case pretty good.

I saw this too. I'll try to address it in v8 of this series.

Re: [kernel-hardening] Re: [PATCH v7 3/6] random: use SipHash in place of MD5

[Hannes Frederic Sowa]

On 22.12.2016 14:10, Jason A. Donenfeld wrote:
> On Thu, Dec 22, 2016 at 1:47 PM, Hannes Frederic Sowa
> <hannes@stressinduktion.org> wrote:
>> following up on what appears to be a random subject: ;)
>>
>> IIRC, ext4 code by default still uses half_md4 for hashing of filenames
>> in the htree. siphash seems to fit this use case pretty good.
> 
> I saw this too. I'll try to address it in v8 of this series.

This change would need a new version of the ext4 super block, because
you should not change existing file systems.

Re: [kernel-hardening] Re: [PATCH v7 3/6] random: use SipHash in place of MD5

[Jason A. Donenfeld]

On Thu, Dec 22, 2016 at 4:05 PM, Hannes Frederic Sowa
<hannes@stressinduktion.org> wrote:
> This change would need a new version of the ext4 super block, because
> you should not change existing file systems.

Right.

As a first step, I'm considering adding a patch to move halfmd4.c
inside the ext4 domain, or at the very least, simply remove it from
linux/cryptohash.h. That'll then leave the handful of bizarre sha1
usages to consider.

Re: [kernel-hardening] Re: [PATCH v7 3/6] random: use SipHash in place of MD5

[Jason A. Donenfeld]

On Thu, Dec 22, 2016 at 4:12 PM, Jason A. Donenfeld <Jason@zx2c4.com> wrote:
> As a first step, I'm considering adding a patch to move halfmd4.c
> inside the ext4 domain, or at the very least, simply remove it from
> linux/cryptohash.h. That'll then leave the handful of bizarre sha1
> usages to consider.

Specifically something like this:

https://git.zx2c4.com/linux-dev/commit/?h=siphash&id=978213351f9633bd1e3d1fdc3f19d28e36eeac90

That only leaves two more uses of "cryptohash" to consider, but they
require a bit of help. First, sha_transform in net/ipv6/addrconf.c.
That might be a straight-forward conversion to SipHash, but perhaps
not; I need to look closely and think about it. The next is
sha_transform in kernel/bpf/core.c. I really have no idea what's going
on with the eBPF stuff, so that will take a bit longer to study. Maybe
sha1 is fine in the end there? I'm not sure yet.

Re: [kernel-hardening] Re: [PATCH v7 3/6] random: use SipHash in place of MD5

[Hannes Frederic Sowa]

On Thu, 2016-12-22 at 16:29 +0100, Jason A. Donenfeld wrote:
> On Thu, Dec 22, 2016 at 4:12 PM, Jason A. Donenfeld <Jason@zx2c4.com> wrote:
> > As a first step, I'm considering adding a patch to move halfmd4.c
> > inside the ext4 domain, or at the very least, simply remove it from
> > linux/cryptohash.h. That'll then leave the handful of bizarre sha1
> > usages to consider.
> 
> Specifically something like this:
> 
> https://git.zx2c4.com/linux-dev/commit/?h=siphash&id=978213351f9633bd1e3d1fdc3f19d28e36eeac90
> 
> That only leaves two more uses of "cryptohash" to consider, but they
> require a bit of help. First, sha_transform in net/ipv6/addrconf.c.
> That might be a straight-forward conversion to SipHash, but perhaps
> not; I need to look closely and think about it. The next is
> sha_transform in kernel/bpf/core.c. I really have no idea what's going
> on with the eBPF stuff, so that will take a bit longer to study. Maybe
> sha1 is fine in the end there? I'm not sure yet.

IPv6 you cannot touch anymore. The hashing algorithm is part of uAPI.
You don't want to give people new IPv6 addresses with the same stable
secret (across reboots) after a kernel upgrade. Maybe they lose
connectivity then and it is extra work?

The bpf hash stuff can be changed during this merge window, as it is
not yet in a released kernel. Albeit I would probably have preferred
something like sha256 here, which can be easily replicated by user
space tools (minus the problem of patching out references to not
hashable data, which must be zeroed).

Bye,
Hannes

Re: [kernel-hardening] Re: [PATCH v7 3/6] random: use SipHash in place of MD5

[Jason A. Donenfeld]

Hi Hannes,

On Thu, Dec 22, 2016 at 4:33 PM, Hannes Frederic Sowa
<hannes@stressinduktion.org> wrote:
> IPv6 you cannot touch anymore. The hashing algorithm is part of uAPI.
> You don't want to give people new IPv6 addresses with the same stable
> secret (across reboots) after a kernel upgrade. Maybe they lose
> connectivity then and it is extra work?

Ahh, too bad. So it goes.

> The bpf hash stuff can be changed during this merge window, as it is
> not yet in a released kernel. Albeit I would probably have preferred
> something like sha256 here, which can be easily replicated by user
> space tools (minus the problem of patching out references to not
> hashable data, which must be zeroed).

Oh, interesting, so time is of the essence then. Do you want to handle
changing the new eBPF code to something not-SHA1 before it's too late,
as part of a new patchset that can fast track itself to David? And
then I can preserve my large series for the next merge window.

Jason

Re: [kernel-hardening] Re: [PATCH v7 3/6] random: use SipHash in place of MD5

[Hannes Frederic Sowa]

On Thu, 2016-12-22 at 16:41 +0100, Jason A. Donenfeld wrote:
> Hi Hannes,
> 
> On Thu, Dec 22, 2016 at 4:33 PM, Hannes Frederic Sowa
> <hannes@stressinduktion.org> wrote:
> > IPv6 you cannot touch anymore. The hashing algorithm is part of uAPI.
> > You don't want to give people new IPv6 addresses with the same stable
> > secret (across reboots) after a kernel upgrade. Maybe they lose
> > connectivity then and it is extra work?
> 
> Ahh, too bad. So it goes.

If no other users survive we can put it into the ipv6 module.

> > The bpf hash stuff can be changed during this merge window, as it is
> > not yet in a released kernel. Albeit I would probably have preferred
> > something like sha256 here, which can be easily replicated by user
> > space tools (minus the problem of patching out references to not
> > hashable data, which must be zeroed).
> 
> Oh, interesting, so time is of the essence then. Do you want to handle
> changing the new eBPF code to something not-SHA1 before it's too late,
> as part of a new patchset that can fast track itself to David? And
> then I can preserve my large series for the next merge window.

This algorithm should be a non-seeded algorithm, because the hashes
should be stable and verifiable by user space tooling. Thus this would
need a hashing algorithm that is hardened against pre-image
attacks/collision resistance, which siphash is not. I would prefer some
higher order SHA algorithm for that actually.

Bye,
Hannes
 

Re: [kernel-hardening] Re: [PATCH v7 3/6] random: use SipHash in place of MD5

[Jason A. Donenfeld]

On Thu, Dec 22, 2016 at 4:51 PM, Hannes Frederic Sowa
<hannes@stressinduktion.org> wrote:
> This algorithm should be a non-seeded algorithm, because the hashes
> should be stable and verifiable by user space tooling. Thus this would
> need a hashing algorithm that is hardened against pre-image
> attacks/collision resistance, which siphash is not. I would prefer some
> higher order SHA algorithm for that actually.

Right. SHA-256, SHA-512/256, Blake2s, or Blake2b would probably be
good candidates for this.

Re: [kernel-hardening] Re: [PATCH v7 3/6] random: use SipHash in place of MD5

[Theodore Ts'o]

On Thu, Dec 22, 2016 at 02:10:33PM +0100, Jason A. Donenfeld wrote:
> On Thu, Dec 22, 2016 at 1:47 PM, Hannes Frederic Sowa
> <hannes@stressinduktion.org> wrote:
> > following up on what appears to be a random subject: ;)
> >
> > IIRC, ext4 code by default still uses half_md4 for hashing of filenames
> > in the htree. siphash seems to fit this use case pretty good.
> 
> I saw this too. I'll try to address it in v8 of this series.

This is a separate issue, and this series is getting a bit too
complex.  So I'd suggest pushing this off to a separate change.

Changing the htree hash algorithm is an on-disk format change, and so
we couldn't roll it out until e2fsprogs gets updated and rolled out
pretty broadley.  In fact George sent me patches to add siphash as a
hash algorithm for htree a while back (for both the kernel and
e2fsprogs), but I never got around to testing and applying them,
mainly because while it's technically faster, I had other higher
priority issues to work on --- and see previous comments regarding
pixel peeping.  Improving the hash algorithm by tens or even hundreds
of nanoseconds isn't really going to matter since we only do a htree
lookup on a file creation or cold cache lookup, and the SSD or HDD I/O
times will dominate.  And from the power perspective, saving
microwatts of CPU power isn't going to matter if you're going to be
spinning up the storage device....

						- Ted

Re: [kernel-hardening] Re: [PATCH v7 3/6] random: use SipHash in place of MD5

[Hannes Frederic Sowa]

On 22.12.2016 16:54, Theodore Ts'o wrote:
> On Thu, Dec 22, 2016 at 02:10:33PM +0100, Jason A. Donenfeld wrote:
>> On Thu, Dec 22, 2016 at 1:47 PM, Hannes Frederic Sowa
>> <hannes@stressinduktion.org> wrote:
>>> following up on what appears to be a random subject: ;)
>>>
>>> IIRC, ext4 code by default still uses half_md4 for hashing of filenames
>>> in the htree. siphash seems to fit this use case pretty good.
>>
>> I saw this too. I'll try to address it in v8 of this series.
> 
> This is a separate issue, and this series is getting a bit too
> complex.  So I'd suggest pushing this off to a separate change.
> 
> Changing the htree hash algorithm is an on-disk format change, and so
> we couldn't roll it out until e2fsprogs gets updated and rolled out
> pretty broadley.  In fact George sent me patches to add siphash as a
> hash algorithm for htree a while back (for both the kernel and
> e2fsprogs), but I never got around to testing and applying them,
> mainly because while it's technically faster, I had other higher
> priority issues to work on --- and see previous comments regarding
> pixel peeping.  Improving the hash algorithm by tens or even hundreds
> of nanoseconds isn't really going to matter since we only do a htree
> lookup on a file creation or cold cache lookup, and the SSD or HDD I/O
> times will dominate.  And from the power perspective, saving
> microwatts of CPU power isn't going to matter if you're going to be
> spinning up the storage device....

I wasn't concerned about performance but more about DoS resilience. I
wonder how safe half md4 actually is in terms of allowing users to
generate long hash chains in the filesystem (in terms of length
extension attacks against half_md4).

In ext4, is it actually possible that a "disrupter" learns about the
hashing secret in the way how the inodes are returned during getdents?

Thanks,
Hannes

Re: [kernel-hardening] Re: [PATCH v7 3/6] random: use SipHash in place of MD5

[Jason A. Donenfeld]

On Thu, Dec 22, 2016 at 7:08 PM, Hannes Frederic Sowa
<hannes@stressinduktion.org> wrote:
> I wasn't concerned about performance but more about DoS resilience. I
> wonder how safe half md4 actually is in terms of allowing users to
> generate long hash chains in the filesystem (in terms of length
> extension attacks against half_md4).

AFAIK, this is a real vulnerability that needs to be addressed.

Judging by Ted's inquiry about my siphash testing suite, I assume he's
probably tinkering around with it as we speak. :)


Meanwhile I've separated things into several trees:

1. chacha20 rng, already submitted:
https://git.zx2c4.com/linux-dev/log/?h=random-next

2. md5 cleanup, not yet submitted:
https://git.zx2c4.com/linux-dev/log/?h=md5-cleanup

3. md4 cleanup, already submitted:
https://git.zx2c4.com/linux-dev/log/?h=ext4-next-md4-cleanup

4. siphash and networking, not yet submitted as a x/4 series:
https://git.zx2c4.com/linux-dev/log/?h=net-next-siphash

I'll submit (4) in a couple of days, waiting for any comments on the
existing patch-set.

Jason

Re: [kernel-hardening] Re: [PATCH v7 3/6] random: use SipHash in place of MD5

[Theodore Ts'o]

On Thu, Dec 22, 2016 at 07:08:37PM +0100, Hannes Frederic Sowa wrote:
> I wasn't concerned about performance but more about DoS resilience. I
> wonder how safe half md4 actually is in terms of allowing users to
> generate long hash chains in the filesystem (in terms of length
> extension attacks against half_md4).
> 
> In ext4, is it actually possible that a "disrupter" learns about the
> hashing secret in the way how the inodes are returned during getdents?

They'd have to be a local user, who can execute telldir(3) --- in
which case there are plenty of other denial of service attacks one
could carry out that would be far more devastating.

It might also be an issue if the file system is exposed via NFS, but
again, there are so many other ways an attacker could DoS a NFS server
that I don't think of it as a much of a concern.

Keep in mind that worst someone can do is cause directory inserts to
fail with an ENOSPC, and there are plenty of other ways of doing that
--- such as consuming all of the blocks and inodes in the file system,
for example.

So it's a threat, but not a high priority one as far as I'm concerned.
And if this was a problem in actual practice, users could switch to
the TEA based hash, which should be far harder to attack, and
available today.

					- Ted

Re: [PATCH v7 3/6] random: use SipHash in place of MD5

[Jason A. Donenfeld]

Hi Andy,

On Thu, Dec 22, 2016 at 12:42 AM, Andy Lutomirski <luto@amacapital.net> wrote:
> So this is probably good enough, and making it better is hard.  Changing it to:
>
> u64 entropy = (u64)random_get_entropy() + current->pid;
> result = siphash(..., entropy, ...);
> secret->chaining += result + entropy;
>
> would reduce this problem by forcing an attacker to brute-force the
> entropy on each iteration, which is probably an improvement.

Ahh, so that's the reasoning behind a similar suggestion of yours in a
previous email. Makes sense to me. I'll include this in the next merge
if we don't come up with a different idea before then. Your reasoning
seems good for it.

Part of what makes this process a bit goofy is that it's not all
together clear what the design goals are. Right now we're going for
"not worse than before", which we've nearly achieved. How good of an
RNG do we want? I'm willing to examine and analyze the security and
performance of all constructions we can come up with. One thing I
don't want to do, however, is start tweaking the primitives themselves
in ways not endorsed by the designers. So, I believe that precludes
things like carrying over SipHash's internal state (like what was done
with MD5), because there hasn't been a formal security analysis of
this like there has with other uses of SipHash. I also don't want to
change any internals of how SipHash actually works. I mention that
because of some of the suggestions on other threads, which make me
rather uneasy.

So with that said, while writing this reply to you, I was
simultaneously reading some other crypto code and was reminded that
there's a variant of SipHash which outputs an additional 64-bits; it's
part of the siphash reference code, which they call the "128-bit
mode". It has the benefit that we can return 64-bits to the caller and
save 64-bits for the chaining key. That way there's no correlation
between the returned secret and the chaining key, which I think would
completely alleviate all of your concerns, and simplify the analysis a
bit.

Here's what it looks like:
https://git.zx2c4.com/linux-dev/commit/?h=siphash&id=46fbe5b408e66b2d16b4447860f8083480e1c08d

The downside is that it takes 4 extra Sip rounds. This puts the
performance still better than MD5, though, and likely still better
than the other batched entropy solution. We could optimize this, I
suppose, by giving it only two parameters -- chaining,
jiffies+entropy+pid -- instead of the current three -- chaining,
jiffies, entropy+pid -- which would then shave off 2 Sip rounds. But I
liked the idea of having a bit more spread in the entropy input field.

Anyway, with this in mind, we now have three possibilities:

1. result = siphash(chaining, entropy, key); chaining += result + entropy
2. result = siphash_extra_output(chaining, entropy, key, &chaining);
3. Ted's batched entropy idea using chacha20

The more I think about this, the more I suspect that we should just
use chacha20. It will still be faster than MD5. I don't like the
non-determinism of it (some processes will start slower than others,
if the batched entropy has run out and ASLR demands more), but I guess
I can live with that. But, most importantly, it greatly simplifies
both the security analysis and what we can promise to callers about
the function. Right now in the comment documentation, we're coy with
callers about the security of the RNG. If we moved to a known
construction like chacha20/get_random_bytes_batched, then we could
just be straight up with a promise that the numbers it returns are
high quality.

Thoughts on 2 and 3, and on 1 vs 2 vs 3?

Jason

[PATCH v7 4/6] md5: remove from lib and only live in crypto

[Jason A. Donenfeld]

The md5_transform function is no longer used any where in the tree,
except for the crypto api's actual implementation of md5, so we can drop
the function from lib and put it as a static function of the crypto
file, where it belongs. There should be no new users of md5_transform,
anyway, since there are more modern ways of doing what it once achieved.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
---
 crypto/md5.c | 95 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
 lib/Makefile |  2 +-
 lib/md5.c    | 95 ------------------------------------------------------------
 3 files changed, 95 insertions(+), 97 deletions(-)
 delete mode 100644 lib/md5.c

diff --git a/crypto/md5.c b/crypto/md5.c
index 2355a7c25c45..f7ae1a48225b 100644
--- a/crypto/md5.c
+++ b/crypto/md5.c
@@ -21,9 +21,11 @@
 #include <linux/module.h>
 #include <linux/string.h>
 #include <linux/types.h>
-#include <linux/cryptohash.h>
 #include <asm/byteorder.h>
 
+#define MD5_DIGEST_WORDS 4
+#define MD5_MESSAGE_BYTES 64
+
 const u8 md5_zero_message_hash[MD5_DIGEST_SIZE] = {
 	0xd4, 0x1d, 0x8c, 0xd9, 0x8f, 0x00, 0xb2, 0x04,
 	0xe9, 0x80, 0x09, 0x98, 0xec, 0xf8, 0x42, 0x7e,
@@ -47,6 +49,97 @@ static inline void cpu_to_le32_array(u32 *buf, unsigned int words)
 	}
 }
 
+#define F1(x, y, z)	(z ^ (x & (y ^ z)))
+#define F2(x, y, z)	F1(z, x, y)
+#define F3(x, y, z)	(x ^ y ^ z)
+#define F4(x, y, z)	(y ^ (x | ~z))
+
+#define MD5STEP(f, w, x, y, z, in, s) \
+	(w += f(x, y, z) + in, w = (w<<s | w>>(32-s)) + x)
+
+static void md5_transform(__u32 *hash, __u32 const *in)
+{
+	u32 a, b, c, d;
+
+	a = hash[0];
+	b = hash[1];
+	c = hash[2];
+	d = hash[3];
+
+	MD5STEP(F1, a, b, c, d, in[0] + 0xd76aa478, 7);
+	MD5STEP(F1, d, a, b, c, in[1] + 0xe8c7b756, 12);
+	MD5STEP(F1, c, d, a, b, in[2] + 0x242070db, 17);
+	MD5STEP(F1, b, c, d, a, in[3] + 0xc1bdceee, 22);
+	MD5STEP(F1, a, b, c, d, in[4] + 0xf57c0faf, 7);
+	MD5STEP(F1, d, a, b, c, in[5] + 0x4787c62a, 12);
+	MD5STEP(F1, c, d, a, b, in[6] + 0xa8304613, 17);
+	MD5STEP(F1, b, c, d, a, in[7] + 0xfd469501, 22);
+	MD5STEP(F1, a, b, c, d, in[8] + 0x698098d8, 7);
+	MD5STEP(F1, d, a, b, c, in[9] + 0x8b44f7af, 12);
+	MD5STEP(F1, c, d, a, b, in[10] + 0xffff5bb1, 17);
+	MD5STEP(F1, b, c, d, a, in[11] + 0x895cd7be, 22);
+	MD5STEP(F1, a, b, c, d, in[12] + 0x6b901122, 7);
+	MD5STEP(F1, d, a, b, c, in[13] + 0xfd987193, 12);
+	MD5STEP(F1, c, d, a, b, in[14] + 0xa679438e, 17);
+	MD5STEP(F1, b, c, d, a, in[15] + 0x49b40821, 22);
+
+	MD5STEP(F2, a, b, c, d, in[1] + 0xf61e2562, 5);
+	MD5STEP(F2, d, a, b, c, in[6] + 0xc040b340, 9);
+	MD5STEP(F2, c, d, a, b, in[11] + 0x265e5a51, 14);
+	MD5STEP(F2, b, c, d, a, in[0] + 0xe9b6c7aa, 20);
+	MD5STEP(F2, a, b, c, d, in[5] + 0xd62f105d, 5);
+	MD5STEP(F2, d, a, b, c, in[10] + 0x02441453, 9);
+	MD5STEP(F2, c, d, a, b, in[15] + 0xd8a1e681, 14);
+	MD5STEP(F2, b, c, d, a, in[4] + 0xe7d3fbc8, 20);
+	MD5STEP(F2, a, b, c, d, in[9] + 0x21e1cde6, 5);
+	MD5STEP(F2, d, a, b, c, in[14] + 0xc33707d6, 9);
+	MD5STEP(F2, c, d, a, b, in[3] + 0xf4d50d87, 14);
+	MD5STEP(F2, b, c, d, a, in[8] + 0x455a14ed, 20);
+	MD5STEP(F2, a, b, c, d, in[13] + 0xa9e3e905, 5);
+	MD5STEP(F2, d, a, b, c, in[2] + 0xfcefa3f8, 9);
+	MD5STEP(F2, c, d, a, b, in[7] + 0x676f02d9, 14);
+	MD5STEP(F2, b, c, d, a, in[12] + 0x8d2a4c8a, 20);
+
+	MD5STEP(F3, a, b, c, d, in[5] + 0xfffa3942, 4);
+	MD5STEP(F3, d, a, b, c, in[8] + 0x8771f681, 11);
+	MD5STEP(F3, c, d, a, b, in[11] + 0x6d9d6122, 16);
+	MD5STEP(F3, b, c, d, a, in[14] + 0xfde5380c, 23);
+	MD5STEP(F3, a, b, c, d, in[1] + 0xa4beea44, 4);
+	MD5STEP(F3, d, a, b, c, in[4] + 0x4bdecfa9, 11);
+	MD5STEP(F3, c, d, a, b, in[7] + 0xf6bb4b60, 16);
+	MD5STEP(F3, b, c, d, a, in[10] + 0xbebfbc70, 23);
+	MD5STEP(F3, a, b, c, d, in[13] + 0x289b7ec6, 4);
+	MD5STEP(F3, d, a, b, c, in[0] + 0xeaa127fa, 11);
+	MD5STEP(F3, c, d, a, b, in[3] + 0xd4ef3085, 16);
+	MD5STEP(F3, b, c, d, a, in[6] + 0x04881d05, 23);
+	MD5STEP(F3, a, b, c, d, in[9] + 0xd9d4d039, 4);
+	MD5STEP(F3, d, a, b, c, in[12] + 0xe6db99e5, 11);
+	MD5STEP(F3, c, d, a, b, in[15] + 0x1fa27cf8, 16);
+	MD5STEP(F3, b, c, d, a, in[2] + 0xc4ac5665, 23);
+
+	MD5STEP(F4, a, b, c, d, in[0] + 0xf4292244, 6);
+	MD5STEP(F4, d, a, b, c, in[7] + 0x432aff97, 10);
+	MD5STEP(F4, c, d, a, b, in[14] + 0xab9423a7, 15);
+	MD5STEP(F4, b, c, d, a, in[5] + 0xfc93a039, 21);
+	MD5STEP(F4, a, b, c, d, in[12] + 0x655b59c3, 6);
+	MD5STEP(F4, d, a, b, c, in[3] + 0x8f0ccc92, 10);
+	MD5STEP(F4, c, d, a, b, in[10] + 0xffeff47d, 15);
+	MD5STEP(F4, b, c, d, a, in[1] + 0x85845dd1, 21);
+	MD5STEP(F4, a, b, c, d, in[8] + 0x6fa87e4f, 6);
+	MD5STEP(F4, d, a, b, c, in[15] + 0xfe2ce6e0, 10);
+	MD5STEP(F4, c, d, a, b, in[6] + 0xa3014314, 15);
+	MD5STEP(F4, b, c, d, a, in[13] + 0x4e0811a1, 21);
+	MD5STEP(F4, a, b, c, d, in[4] + 0xf7537e82, 6);
+	MD5STEP(F4, d, a, b, c, in[11] + 0xbd3af235, 10);
+	MD5STEP(F4, c, d, a, b, in[2] + 0x2ad7d2bb, 15);
+	MD5STEP(F4, b, c, d, a, in[9] + 0xeb86d391, 21);
+
+	hash[0] += a;
+	hash[1] += b;
+	hash[2] += c;
+	hash[3] += d;
+}
+
 static inline void md5_transform_helper(struct md5_state *ctx)
 {
 	le32_to_cpu_array(ctx->block, sizeof(ctx->block) / sizeof(u32));
diff --git a/lib/Makefile b/lib/Makefile
index 71d398b04a74..1079152607e0 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -19,7 +19,7 @@ KCOV_INSTRUMENT_dynamic_debug.o := n
 lib-y := ctype.o string.o vsprintf.o cmdline.o \
 	 rbtree.o radix-tree.o dump_stack.o timerqueue.o\
 	 idr.o int_sqrt.o extable.o \
-	 sha1.o chacha20.o md5.o irq_regs.o argv_split.o \
+	 sha1.o chacha20.o irq_regs.o argv_split.o \
 	 flex_proportions.o ratelimit.o show_mem.o \
 	 is_single_threaded.o plist.o decompress.o kobject_uevent.o \
 	 earlycpio.o seq_buf.o siphash.o \
diff --git a/lib/md5.c b/lib/md5.c
deleted file mode 100644
index bb0cd01d356d..000000000000
--- a/lib/md5.c
+++ /dev/null
@@ -1,95 +0,0 @@
-#include <linux/compiler.h>
-#include <linux/export.h>
-#include <linux/cryptohash.h>
-
-#define F1(x, y, z)	(z ^ (x & (y ^ z)))
-#define F2(x, y, z)	F1(z, x, y)
-#define F3(x, y, z)	(x ^ y ^ z)
-#define F4(x, y, z)	(y ^ (x | ~z))
-
-#define MD5STEP(f, w, x, y, z, in, s) \
-	(w += f(x, y, z) + in, w = (w<<s | w>>(32-s)) + x)
-
-void md5_transform(__u32 *hash, __u32 const *in)
-{
-	u32 a, b, c, d;
-
-	a = hash[0];
-	b = hash[1];
-	c = hash[2];
-	d = hash[3];
-
-	MD5STEP(F1, a, b, c, d, in[0] + 0xd76aa478, 7);
-	MD5STEP(F1, d, a, b, c, in[1] + 0xe8c7b756, 12);
-	MD5STEP(F1, c, d, a, b, in[2] + 0x242070db, 17);
-	MD5STEP(F1, b, c, d, a, in[3] + 0xc1bdceee, 22);
-	MD5STEP(F1, a, b, c, d, in[4] + 0xf57c0faf, 7);
-	MD5STEP(F1, d, a, b, c, in[5] + 0x4787c62a, 12);
-	MD5STEP(F1, c, d, a, b, in[6] + 0xa8304613, 17);
-	MD5STEP(F1, b, c, d, a, in[7] + 0xfd469501, 22);
-	MD5STEP(F1, a, b, c, d, in[8] + 0x698098d8, 7);
-	MD5STEP(F1, d, a, b, c, in[9] + 0x8b44f7af, 12);
-	MD5STEP(F1, c, d, a, b, in[10] + 0xffff5bb1, 17);
-	MD5STEP(F1, b, c, d, a, in[11] + 0x895cd7be, 22);
-	MD5STEP(F1, a, b, c, d, in[12] + 0x6b901122, 7);
-	MD5STEP(F1, d, a, b, c, in[13] + 0xfd987193, 12);
-	MD5STEP(F1, c, d, a, b, in[14] + 0xa679438e, 17);
-	MD5STEP(F1, b, c, d, a, in[15] + 0x49b40821, 22);
-
-	MD5STEP(F2, a, b, c, d, in[1] + 0xf61e2562, 5);
-	MD5STEP(F2, d, a, b, c, in[6] + 0xc040b340, 9);
-	MD5STEP(F2, c, d, a, b, in[11] + 0x265e5a51, 14);
-	MD5STEP(F2, b, c, d, a, in[0] + 0xe9b6c7aa, 20);
-	MD5STEP(F2, a, b, c, d, in[5] + 0xd62f105d, 5);
-	MD5STEP(F2, d, a, b, c, in[10] + 0x02441453, 9);
-	MD5STEP(F2, c, d, a, b, in[15] + 0xd8a1e681, 14);
-	MD5STEP(F2, b, c, d, a, in[4] + 0xe7d3fbc8, 20);
-	MD5STEP(F2, a, b, c, d, in[9] + 0x21e1cde6, 5);
-	MD5STEP(F2, d, a, b, c, in[14] + 0xc33707d6, 9);
-	MD5STEP(F2, c, d, a, b, in[3] + 0xf4d50d87, 14);
-	MD5STEP(F2, b, c, d, a, in[8] + 0x455a14ed, 20);
-	MD5STEP(F2, a, b, c, d, in[13] + 0xa9e3e905, 5);
-	MD5STEP(F2, d, a, b, c, in[2] + 0xfcefa3f8, 9);
-	MD5STEP(F2, c, d, a, b, in[7] + 0x676f02d9, 14);
-	MD5STEP(F2, b, c, d, a, in[12] + 0x8d2a4c8a, 20);
-
-	MD5STEP(F3, a, b, c, d, in[5] + 0xfffa3942, 4);
-	MD5STEP(F3, d, a, b, c, in[8] + 0x8771f681, 11);
-	MD5STEP(F3, c, d, a, b, in[11] + 0x6d9d6122, 16);
-	MD5STEP(F3, b, c, d, a, in[14] + 0xfde5380c, 23);
-	MD5STEP(F3, a, b, c, d, in[1] + 0xa4beea44, 4);
-	MD5STEP(F3, d, a, b, c, in[4] + 0x4bdecfa9, 11);
-	MD5STEP(F3, c, d, a, b, in[7] + 0xf6bb4b60, 16);
-	MD5STEP(F3, b, c, d, a, in[10] + 0xbebfbc70, 23);
-	MD5STEP(F3, a, b, c, d, in[13] + 0x289b7ec6, 4);
-	MD5STEP(F3, d, a, b, c, in[0] + 0xeaa127fa, 11);
-	MD5STEP(F3, c, d, a, b, in[3] + 0xd4ef3085, 16);
-	MD5STEP(F3, b, c, d, a, in[6] + 0x04881d05, 23);
-	MD5STEP(F3, a, b, c, d, in[9] + 0xd9d4d039, 4);
-	MD5STEP(F3, d, a, b, c, in[12] + 0xe6db99e5, 11);
-	MD5STEP(F3, c, d, a, b, in[15] + 0x1fa27cf8, 16);
-	MD5STEP(F3, b, c, d, a, in[2] + 0xc4ac5665, 23);
-
-	MD5STEP(F4, a, b, c, d, in[0] + 0xf4292244, 6);
-	MD5STEP(F4, d, a, b, c, in[7] + 0x432aff97, 10);
-	MD5STEP(F4, c, d, a, b, in[14] + 0xab9423a7, 15);
-	MD5STEP(F4, b, c, d, a, in[5] + 0xfc93a039, 21);
-	MD5STEP(F4, a, b, c, d, in[12] + 0x655b59c3, 6);
-	MD5STEP(F4, d, a, b, c, in[3] + 0x8f0ccc92, 10);
-	MD5STEP(F4, c, d, a, b, in[10] + 0xffeff47d, 15);
-	MD5STEP(F4, b, c, d, a, in[1] + 0x85845dd1, 21);
-	MD5STEP(F4, a, b, c, d, in[8] + 0x6fa87e4f, 6);
-	MD5STEP(F4, d, a, b, c, in[15] + 0xfe2ce6e0, 10);
-	MD5STEP(F4, c, d, a, b, in[6] + 0xa3014314, 15);
-	MD5STEP(F4, b, c, d, a, in[13] + 0x4e0811a1, 21);
-	MD5STEP(F4, a, b, c, d, in[4] + 0xf7537e82, 6);
-	MD5STEP(F4, d, a, b, c, in[11] + 0xbd3af235, 10);
-	MD5STEP(F4, c, d, a, b, in[2] + 0x2ad7d2bb, 15);
-	MD5STEP(F4, b, c, d, a, in[9] + 0xeb86d391, 21);
-
-	hash[0] += a;
-	hash[1] += b;
-	hash[2] += c;
-	hash[3] += d;
-}
-EXPORT_SYMBOL(md5_transform);
-- 
2.11.0

[PATCH v7 5/6] syncookies: use SipHash in place of SHA1

[Jason A. Donenfeld]

SHA1 is slower and less secure than SipHash, and so replacing syncookie
generation with SipHash makes natural sense. Some BSDs have been doing
this for several years in fact.

The speedup should be similar -- and even more impressive -- to the
speedup from the sequence number fix in this series.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David Miller <davem@davemloft.net>
---
 net/ipv4/syncookies.c | 20 ++++----------------
 net/ipv6/syncookies.c | 37 ++++++++++++++++---------------------
 2 files changed, 20 insertions(+), 37 deletions(-)

diff --git a/net/ipv4/syncookies.c b/net/ipv4/syncookies.c
index 3e88467d70ee..03bb068f8888 100644
--- a/net/ipv4/syncookies.c
+++ b/net/ipv4/syncookies.c
@@ -13,13 +13,13 @@
 #include <linux/tcp.h>
 #include <linux/slab.h>
 #include <linux/random.h>
-#include <linux/cryptohash.h>
+#include <linux/siphash.h>
 #include <linux/kernel.h>
 #include <linux/export.h>
 #include <net/tcp.h>
 #include <net/route.h>
 
-static u32 syncookie_secret[2][16-4+SHA_DIGEST_WORDS] __read_mostly;
+static siphash_key_t syncookie_secret[2] __read_mostly;
 
 #define COOKIEBITS 24	/* Upper bits store count */
 #define COOKIEMASK (((__u32)1 << COOKIEBITS) - 1)
@@ -48,24 +48,12 @@ static u32 syncookie_secret[2][16-4+SHA_DIGEST_WORDS] __read_mostly;
 #define TSBITS	6
 #define TSMASK	(((__u32)1 << TSBITS) - 1)
 
-static DEFINE_PER_CPU(__u32 [16 + 5 + SHA_WORKSPACE_WORDS], ipv4_cookie_scratch);
-
 static u32 cookie_hash(__be32 saddr, __be32 daddr, __be16 sport, __be16 dport,
 		       u32 count, int c)
 {
-	__u32 *tmp;
-
 	net_get_random_once(syncookie_secret, sizeof(syncookie_secret));
-
-	tmp  = this_cpu_ptr(ipv4_cookie_scratch);
-	memcpy(tmp + 4, syncookie_secret[c], sizeof(syncookie_secret[c]));
-	tmp[0] = (__force u32)saddr;
-	tmp[1] = (__force u32)daddr;
-	tmp[2] = ((__force u32)sport << 16) + (__force u32)dport;
-	tmp[3] = count;
-	sha_transform(tmp + 16, (__u8 *)tmp, tmp + 16 + 5);
-
-	return tmp[17];
+	return siphash_4u32(saddr, daddr, (u32)sport << 16 | dport, count,
+			    syncookie_secret[c]);
 }
 
 
diff --git a/net/ipv6/syncookies.c b/net/ipv6/syncookies.c
index a4d49760bf43..be51fc0d99ad 100644
--- a/net/ipv6/syncookies.c
+++ b/net/ipv6/syncookies.c
@@ -16,7 +16,7 @@
 
 #include <linux/tcp.h>
 #include <linux/random.h>
-#include <linux/cryptohash.h>
+#include <linux/siphash.h>
 #include <linux/kernel.h>
 #include <net/ipv6.h>
 #include <net/tcp.h>
@@ -24,7 +24,7 @@
 #define COOKIEBITS 24	/* Upper bits store count */
 #define COOKIEMASK (((__u32)1 << COOKIEBITS) - 1)
 
-static u32 syncookie6_secret[2][16-4+SHA_DIGEST_WORDS] __read_mostly;
+static siphash_key_t syncookie6_secret[2] __read_mostly;
 
 /* RFC 2460, Section 8.3:
  * [ipv6 tcp] MSS must be computed as the maximum packet size minus 60 [..]
@@ -41,30 +41,25 @@ static __u16 const msstab[] = {
 	9000 - 60,
 };
 
-static DEFINE_PER_CPU(__u32 [16 + 5 + SHA_WORKSPACE_WORDS], ipv6_cookie_scratch);
-
 static u32 cookie_hash(const struct in6_addr *saddr, const struct in6_addr *daddr,
 		       __be16 sport, __be16 dport, u32 count, int c)
 {
-	__u32 *tmp;
+	const struct {
+		struct in6_addr saddr;
+		struct in6_addr daddr;
+		u32 count;
+		u16 sport;
+		u16 dport;
+	} __aligned(SIPHASH_ALIGNMENT) combined = {
+		.saddr = *saddr,
+		.daddr = *daddr,
+		.count = count,
+		.sport = sport,
+		.dport = dport
+	};
 
 	net_get_random_once(syncookie6_secret, sizeof(syncookie6_secret));
-
-	tmp  = this_cpu_ptr(ipv6_cookie_scratch);
-
-	/*
-	 * we have 320 bits of information to hash, copy in the remaining
-	 * 192 bits required for sha_transform, from the syncookie6_secret
-	 * and overwrite the digest with the secret
-	 */
-	memcpy(tmp + 10, syncookie6_secret[c], 44);
-	memcpy(tmp, saddr, 16);
-	memcpy(tmp + 4, daddr, 16);
-	tmp[8] = ((__force u32)sport << 16) + (__force u32)dport;
-	tmp[9] = count;
-	sha_transform(tmp + 16, (__u8 *)tmp, tmp + 16 + 5);
-
-	return tmp[17];
+	return siphash(&combined, offsetofend(typeof(combined), dport), syncookie6_secret[c]);
 }
 
 static __u32 secure_tcp_syn_cookie(const struct in6_addr *saddr,
-- 
2.11.0

[PATCH v7 6/6] siphash: implement HalfSipHash1-3 for hash tables

[Jason A. Donenfeld]

HalfSipHash, or hsiphash, is a shortened version of SipHash, which
generates 32-bit outputs using a weaker 64-bit key. It has *much* lower
security margins, and shouldn't be used for anything too sensitive, but
it could be used as a hashtable key function replacement, if the output
is never exposed, and if the security requirement is not too high.

The goal is to make this something that performance-critical jhash users
would be willing to use.

On 64-bit machines, HalfSipHash1-3 is slower than SipHash1-3, so we alias
SipHash1-3 to HalfSipHash1-3 on those systems.

64-bit x86_64:
[    0.509409] test_siphash:     SipHash2-4 cycles: 4049181
[    0.510650] test_siphash:     SipHash1-3 cycles: 2512884
[    0.512205] test_siphash: HalfSipHash1-3 cycles: 3429920
[    0.512904] test_siphash:    JenkinsHash cycles:  978267
So, we map hsiphash() -> SipHash1-3

32-bit x86:
[    0.509868] test_siphash:     SipHash2-4 cycles: 14812892
[    0.513601] test_siphash:     SipHash1-3 cycles:  9510710
[    0.515263] test_siphash: HalfSipHash1-3 cycles:  3856157
[    0.515952] test_siphash:    JenkinsHash cycles:  1148567
So, we map hsiphash() -> HalfSipHash1-3

hsiphash() is roughly 3 times slower than jhash(), but comes with a
considerable security improvement.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Jean-Philippe Aumasson <jeanphilippe.aumasson@gmail.com>
---
 Documentation/siphash.txt |  75 +++++++++++
 include/linux/siphash.h   |  56 +++++++-
 lib/siphash.c             | 318 +++++++++++++++++++++++++++++++++++++++++++++-
 lib/test_siphash.c        | 139 ++++++++++++++++----
 4 files changed, 561 insertions(+), 27 deletions(-)

diff --git a/Documentation/siphash.txt b/Documentation/siphash.txt
index 39ff7f0438e7..f93c1d7104c4 100644
--- a/Documentation/siphash.txt
+++ b/Documentation/siphash.txt
@@ -77,3 +77,78 @@ Linux implements the "2-4" variant of SipHash.
 
 Read the SipHash paper if you're interested in learning more:
 https://131002.net/siphash/siphash.pdf
+
+
+~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
+
+HalfSipHash - SipHash's insecure younger cousin
+-----------------------------------------------
+Written by Jason A. Donenfeld <jason@zx2c4.com>
+
+On the off-chance that SipHash is not fast enough for your needs, you might be
+able to justify using HalfSipHash, a terrifying but potentially useful
+possibility. HalfSipHash cuts SipHash's rounds down from "2-4" to "1-3" and,
+even scarier, uses an easily brute-forcable 64-bit key (with a 32-bit output)
+instead of SipHash's 128-bit key. However, this may appeal to some
+high-performance `jhash` users.
+
+Danger!
+
+Do not ever use HalfSipHash except for as a hashtable key function, and only
+then when you can be absolutely certain that the outputs will never be
+transmitted out of the kernel. This is only remotely useful over `jhash` as a
+means of mitigating hashtable flooding denial of service attacks.
+
+1. Generating a key
+
+Keys should always be generated from a cryptographically secure source of
+random numbers, either using get_random_bytes or get_random_once:
+
+hsiphash_key_t key;
+get_random_bytes(key, sizeof(key));
+
+If you're not deriving your key from here, you're doing it wrong.
+
+2. Using the functions
+
+There are two variants of the function, one that takes a list of integers, and
+one that takes a buffer:
+
+u32 hsiphash(const void *data, size_t len, siphash_key_t key);
+
+And:
+
+u32 hsiphash_1u32(u32, hsiphash_key_t key);
+u32 hsiphash_2u32(u32, u32, hsiphash_key_t key);
+u32 hsiphash_3u32(u32, u32, u32, hsiphash_key_t key);
+u32 hsiphash_4u32(u32, u32, u32, u32, hsiphash_key_t key);
+
+If you pass the generic hsiphash function something of a constant length, it
+will constant fold at compile-time and automatically choose one of the
+optimized functions.
+
+3. Hashtable key function usage:
+
+struct some_hashtable {
+	DECLARE_HASHTABLE(hashtable, 8);
+	hsiphash_key_t key;
+};
+
+void init_hashtable(struct some_hashtable *table)
+{
+	get_random_bytes(table->key, sizeof(table->key));
+}
+
+static inline hlist_head *some_hashtable_bucket(struct some_hashtable *table, struct interesting_input *input)
+{
+	return &table->hashtable[hsiphash(input, sizeof(*input), table->key) & (HASH_SIZE(table->hashtable) - 1)];
+}
+
+You may then iterate like usual over the returned hash bucket.
+
+4. Performance
+
+HalfSipHash is roughly 3 times slower than JenkinsHash. For many replacements,
+this will not be a problem, as the hashtable lookup isn't the bottleneck. And
+in general, this is probably a good sacrifice to make for the security and DoS
+resistance of HalfSipHash.
diff --git a/include/linux/siphash.h b/include/linux/siphash.h
index 7aa666eb00d9..efab44c654f3 100644
--- a/include/linux/siphash.h
+++ b/include/linux/siphash.h
@@ -5,7 +5,9 @@
  * SipHash: a fast short-input PRF
  * https://131002.net/siphash/
  *
- * This implementation is specifically for SipHash2-4.
+ * This implementation is specifically for SipHash2-4 for a secure PRF
+ * and HalfSipHash1-3/SipHash1-3 for an insecure PRF only suitable for
+ * hashtables.
  */
 
 #ifndef _LINUX_SIPHASH_H
@@ -76,4 +78,56 @@ static inline u64 siphash(const void *data, size_t len, const siphash_key_t key)
 	return ___siphash_aligned(data, len, key);
 }
 
+#if BITS_PER_LONG == 64
+typedef siphash_key_t hsiphash_key_t;
+#define HSIPHASH_ALIGNMENT SIPHASH_ALIGNMENT
+#else
+typedef u32 hsiphash_key_t[2];
+#define HSIPHASH_ALIGNMENT __alignof__(u32)
+#endif
+
+u32 __hsiphash_aligned(const void *data, size_t len, const hsiphash_key_t key);
+#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+u32 __hsiphash_unaligned(const void *data, size_t len, const hsiphash_key_t key);
+#endif
+
+u32 hsiphash_1u32(const u32 a, const hsiphash_key_t key);
+u32 hsiphash_2u32(const u32 a, const u32 b, const hsiphash_key_t key);
+u32 hsiphash_3u32(const u32 a, const u32 b, const u32 c,
+		  const hsiphash_key_t key);
+u32 hsiphash_4u32(const u32 a, const u32 b, const u32 c, const u32 d,
+		  const hsiphash_key_t key);
+
+static inline u32 ___hsiphash_aligned(const __le32 *data, size_t len, const hsiphash_key_t key)
+{
+	if (__builtin_constant_p(len) && len == 4)
+		return hsiphash_1u32(le32_to_cpu(data[0]), key);
+	if (__builtin_constant_p(len) && len == 8)
+		return hsiphash_2u32(le32_to_cpu(data[0]), le32_to_cpu(data[1]),
+				     key);
+	if (__builtin_constant_p(len) && len == 12)
+		return hsiphash_3u32(le32_to_cpu(data[0]), le32_to_cpu(data[1]),
+				     le32_to_cpu(data[2]), key);
+	if (__builtin_constant_p(len) && len == 16)
+		return hsiphash_4u32(le32_to_cpu(data[0]), le32_to_cpu(data[1]),
+				     le32_to_cpu(data[2]), le32_to_cpu(data[3]),
+				     key);
+	return __hsiphash_aligned(data, len, key);
+}
+
+/**
+ * hsiphash - compute 32-bit hsiphash PRF value
+ * @data: buffer to hash
+ * @size: size of @data
+ * @key: the hsiphash key
+ */
+static inline u32 hsiphash(const void *data, size_t len, const hsiphash_key_t key)
+{
+#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+	if (!IS_ALIGNED((unsigned long)data, HSIPHASH_ALIGNMENT))
+		return __hsiphash_unaligned(data, len, key);
+#endif
+	return ___hsiphash_aligned(data, len, key);
+}
+
 #endif /* _LINUX_SIPHASH_H */
diff --git a/lib/siphash.c b/lib/siphash.c
index ff2151313667..e2481226d96c 100644
--- a/lib/siphash.c
+++ b/lib/siphash.c
@@ -5,7 +5,9 @@
  * SipHash: a fast short-input PRF
  * https://131002.net/siphash/
  *
- * This implementation is specifically for SipHash2-4.
+ * This implementation is specifically for SipHash2-4 for a secure PRF
+ * and HalfSipHash1-3/SipHash1-3 for an insecure PRF only suitable for
+ * hashtables.
  */
 
 #include <linux/siphash.h>
@@ -230,3 +232,317 @@ u64 siphash_3u32(const u32 first, const u32 second, const u32 third,
 	POSTAMBLE
 }
 EXPORT_SYMBOL(siphash_3u32);
+
+#if BITS_PER_LONG == 64
+/* Note that this HalfSipHash1-3 implementation on 64-bit
+ * isn't actually HalfSipHash1-3 but rather SipHash1-3. */
+
+#define HSIPROUND SIPROUND
+#define HPREAMBLE(len) PREAMBLE(len)
+#define HPOSTAMBLE \
+	v3 ^= b; \
+	HSIPROUND; \
+	v0 ^= b; \
+	v2 ^= 0xff; \
+	HSIPROUND; \
+	HSIPROUND; \
+	HSIPROUND; \
+	return (v0 ^ v1) ^ (v2 ^ v3);
+
+u32 __hsiphash_aligned(const void *data, size_t len, const hsiphash_key_t key)
+{
+	const u8 *end = data + len - (len % sizeof(u64));
+	const u8 left = len & (sizeof(u64) - 1);
+	u64 m;
+	HPREAMBLE(len)
+	for (; data != end; data += sizeof(u64)) {
+		m = le64_to_cpup(data);
+		v3 ^= m;
+		HSIPROUND;
+		v0 ^= m;
+	}
+#if defined(CONFIG_DCACHE_WORD_ACCESS) && BITS_PER_LONG == 64
+	if (left)
+		b |= le64_to_cpu((__force __le64)(load_unaligned_zeropad(data) &
+						  bytemask_from_count(left)));
+#else
+	switch (left) {
+	case 7: b |= ((u64)end[6]) << 48;
+	case 6: b |= ((u64)end[5]) << 40;
+	case 5: b |= ((u64)end[4]) << 32;
+	case 4: b |= le32_to_cpup(data); break;
+	case 3: b |= ((u64)end[2]) << 16;
+	case 2: b |= le16_to_cpup(data); break;
+	case 1: b |= end[0];
+	}
+#endif
+	HPOSTAMBLE
+}
+EXPORT_SYMBOL(__hsiphash_aligned);
+
+#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+u32 __hsiphash_unaligned(const void *data, size_t len, const hsiphash_key_t key)
+{
+	const u8 *end = data + len - (len % sizeof(u64));
+	const u8 left = len & (sizeof(u64) - 1);
+	u64 m;
+	HPREAMBLE(len)
+	for (; data != end; data += sizeof(u64)) {
+		m = get_unaligned_le64(data);
+		v3 ^= m;
+		HSIPROUND;
+		v0 ^= m;
+	}
+#if defined(CONFIG_DCACHE_WORD_ACCESS) && BITS_PER_LONG == 64
+	if (left)
+		b |= le64_to_cpu((__force __le64)(load_unaligned_zeropad(data) &
+						  bytemask_from_count(left)));
+#else
+	switch (left) {
+	case 7: b |= ((u64)end[6]) << 48;
+	case 6: b |= ((u64)end[5]) << 40;
+	case 5: b |= ((u64)end[4]) << 32;
+	case 4: b |= get_unaligned_le32(end); break;
+	case 3: b |= ((u64)end[2]) << 16;
+	case 2: b |= get_unaligned_le16(end); break;
+	case 1: b |= end[0];
+	}
+#endif
+	HPOSTAMBLE
+}
+EXPORT_SYMBOL(__hsiphash_unaligned);
+#endif
+
+/**
+ * hsiphash_1u32 - compute 64-bit hsiphash PRF value of a u32
+ * @first: first u32
+ * @key: the hsiphash key
+ */
+u32 hsiphash_1u32(const u32 first, const hsiphash_key_t key)
+{
+	HPREAMBLE(4)
+	b |= first;
+	HPOSTAMBLE
+}
+EXPORT_SYMBOL(hsiphash_1u32);
+
+/**
+ * hsiphash_2u32 - compute 32-bit hsiphash PRF value of 2 u32
+ * @first: first u32
+ * @second: second u32
+ * @key: the hsiphash key
+ */
+u32 hsiphash_2u32(const u32 first, const u32 second, const hsiphash_key_t key)
+{
+	u64 combined = (u64)second << 32 | first;
+	HPREAMBLE(8)
+	v3 ^= combined;
+	HSIPROUND;
+	v0 ^= combined;
+	HPOSTAMBLE
+}
+EXPORT_SYMBOL(hsiphash_2u32);
+
+/**
+ * hsiphash_3u32 - compute 32-bit hsiphash PRF value of 3 u32
+ * @first: first u32
+ * @second: second u32
+ * @third: third u32
+ * @key: the hsiphash key
+ */
+u32 hsiphash_3u32(const u32 first, const u32 second, const u32 third,
+		  const hsiphash_key_t key)
+{
+	u64 combined = (u64)second << 32 | first;
+	HPREAMBLE(12)
+	v3 ^= combined;
+	HSIPROUND;
+	v0 ^= combined;
+	b |= third;
+	HPOSTAMBLE
+}
+EXPORT_SYMBOL(hsiphash_3u32);
+
+/**
+ * hsiphash_4u32 - compute 32-bit hsiphash PRF value of 4 u32
+ * @first: first u32
+ * @second: second u32
+ * @third: third u32
+ * @forth: forth u32
+ * @key: the hsiphash key
+ */
+u32 hsiphash_4u32(const u32 first, const u32 second, const u32 third,
+		  const u32 forth, const hsiphash_key_t key)
+{
+	u64 combined = (u64)second << 32 | first;
+	HPREAMBLE(16)
+	v3 ^= combined;
+	HSIPROUND;
+	v0 ^= combined;
+	combined = (u64)forth << 32 | third;
+	v3 ^= combined;
+	HSIPROUND;
+	v0 ^= combined;
+	HPOSTAMBLE
+}
+EXPORT_SYMBOL(hsiphash_4u32);
+#else
+#define HSIPROUND \
+	do { \
+	v0 += v1; v1 = rol32(v1, 5); v1 ^= v0; v0 = rol32(v0, 16); \
+	v2 += v3; v3 = rol32(v3, 8); v3 ^= v2; \
+	v0 += v3; v3 = rol32(v3, 7); v3 ^= v0; \
+	v2 += v1; v1 = rol32(v1, 13); v1 ^= v2; v2 = rol32(v2, 16); \
+	} while(0)
+
+#define HPREAMBLE(len) \
+	u32 v0 = 0; \
+	u32 v1 = 0; \
+	u32 v2 = 0x6c796765U; \
+	u32 v3 = 0x74656462U; \
+	u32 b = ((u32)len) << 24; \
+	v3 ^= key[1]; \
+	v2 ^= key[0]; \
+	v1 ^= key[1]; \
+	v0 ^= key[0];
+
+#define HPOSTAMBLE \
+	v3 ^= b; \
+	HSIPROUND; \
+	v0 ^= b; \
+	v2 ^= 0xff; \
+	HSIPROUND; \
+	HSIPROUND; \
+	HSIPROUND; \
+	return v1 ^ v3;
+
+u32 __hsiphash_aligned(const void *data, size_t len, const hsiphash_key_t key)
+{
+	const u8 *end = data + len - (len % sizeof(u32));
+	const u8 left = len & (sizeof(u32) - 1);
+	u32 m;
+	HPREAMBLE(len)
+	for (; data != end; data += sizeof(u32)) {
+		m = le32_to_cpup(data);
+		v3 ^= m;
+		HSIPROUND;
+		v0 ^= m;
+	}
+	switch (left) {
+	case 3: b |= ((u32)end[2]) << 16;
+	case 2: b |= le16_to_cpup(data); break;
+	case 1: b |= end[0];
+	}
+	HPOSTAMBLE
+}
+EXPORT_SYMBOL(__hsiphash_aligned);
+
+#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+u32 __hsiphash_unaligned(const void *data, size_t len, const hsiphash_key_t key)
+{
+	const u8 *end = data + len - (len % sizeof(u32));
+	const u8 left = len & (sizeof(u32) - 1);
+	u32 m;
+	HPREAMBLE(len)
+	for (; data != end; data += sizeof(u32)) {
+		m = get_unaligned_le32(data);
+		v3 ^= m;
+		HSIPROUND;
+		v0 ^= m;
+	}
+	switch (left) {
+	case 3: b |= ((u32)end[2]) << 16;
+	case 2: b |= get_unaligned_le16(end); break;
+	case 1: b |= end[0];
+	}
+	HPOSTAMBLE
+}
+EXPORT_SYMBOL(__hsiphash_unaligned);
+#endif
+
+/**
+ * hsiphash_1u32 - compute 32-bit hsiphash PRF value of a u32
+ * @first: first u32
+ * @key: the hsiphash key
+ */
+u32 hsiphash_1u32(const u32 first, const hsiphash_key_t key)
+{
+	HPREAMBLE(4)
+	v3 ^= first;
+	HSIPROUND;
+	v0 ^= first;
+	HPOSTAMBLE
+}
+EXPORT_SYMBOL(hsiphash_1u32);
+
+/**
+ * hsiphash_2u32 - compute 32-bit hsiphash PRF value of 2 u32
+ * @first: first u32
+ * @second: second u32
+ * @key: the hsiphash key
+ */
+u32 hsiphash_2u32(const u32 first, const u32 second, const hsiphash_key_t key)
+{
+	HPREAMBLE(8)
+	v3 ^= first;
+	HSIPROUND;
+	v0 ^= first;
+	v3 ^= second;
+	HSIPROUND;
+	v0 ^= second;
+	HPOSTAMBLE
+}
+EXPORT_SYMBOL(hsiphash_2u32);
+
+/**
+ * hsiphash_3u32 - compute 32-bit hsiphash PRF value of 3 u32
+ * @first: first u32
+ * @second: second u32
+ * @third: third u32
+ * @key: the hsiphash key
+ */
+u32 hsiphash_3u32(const u32 first, const u32 second, const u32 third,
+		  const hsiphash_key_t key)
+{
+	HPREAMBLE(12)
+	v3 ^= first;
+	HSIPROUND;
+	v0 ^= first;
+	v3 ^= second;
+	HSIPROUND;
+	v0 ^= second;
+	v3 ^= third;
+	HSIPROUND;
+	v0 ^= third;
+	HPOSTAMBLE
+}
+EXPORT_SYMBOL(hsiphash_3u32);
+
+/**
+ * hsiphash_4u32 - compute 32-bit hsiphash PRF value of 4 u32
+ * @first: first u32
+ * @second: second u32
+ * @third: third u32
+ * @forth: forth u32
+ * @key: the hsiphash key
+ */
+u32 hsiphash_4u32(const u32 first, const u32 second, const u32 third,
+		  const u32 forth, const hsiphash_key_t key)
+{
+	HPREAMBLE(16)
+	v3 ^= first;
+	HSIPROUND;
+	v0 ^= first;
+	v3 ^= second;
+	HSIPROUND;
+	v0 ^= second;
+	v3 ^= third;
+	HSIPROUND;
+	v0 ^= third;
+	v3 ^= forth;
+	HSIPROUND;
+	v0 ^= forth;
+	HPOSTAMBLE
+}
+EXPORT_SYMBOL(hsiphash_4u32);
+#endif
diff --git a/lib/test_siphash.c b/lib/test_siphash.c
index e0ba2cf8dc67..ac291ec27fb6 100644
--- a/lib/test_siphash.c
+++ b/lib/test_siphash.c
@@ -7,7 +7,9 @@
  * SipHash: a fast short-input PRF
  * https://131002.net/siphash/
  *
- * This implementation is specifically for SipHash2-4.
+ * This implementation is specifically for SipHash2-4 for a secure PRF
+ * and HalfSipHash1-3/SipHash1-3 for an insecure PRF only suitable for
+ * hashtables.
  */
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
@@ -18,10 +20,16 @@
 #include <linux/errno.h>
 #include <linux/module.h>
 
-/* Test vectors taken from official reference source available at:
- *     https://131002.net/siphash/siphash24.c
+/* Test vectors taken from reference source available at:
+ *     https://github.com/veorq/SipHash
  */
-static const u64 test_vectors[64] = {
+
+
+
+static const siphash_key_t test_key_siphash =
+	{ 0x0706050403020100ULL , 0x0f0e0d0c0b0a0908ULL };
+
+static const u64 test_vectors_siphash[64] = {
 	0x726fdb47dd0e0e31ULL, 0x74f839c593dc67fdULL, 0x0d6c8009d9a94f5aULL,
 	0x85676696d7fb7e2dULL, 0xcf2794e0277187b7ULL, 0x18765564cd99a68dULL,
 	0xcbc9466e58fee3ceULL, 0xab0200f58b01d137ULL, 0x93f5f5799a932462ULL,
@@ -45,9 +53,64 @@ static const u64 test_vectors[64] = {
 	0x6ca4ecb15c5f91e1ULL, 0x9f626da15c9625f3ULL, 0xe51b38608ef25f57ULL,
 	0x958a324ceb064572ULL
 };
-static const siphash_key_t test_key =
+#if BITS_PER_LONG == 64
+static const hsiphash_key_t test_key_hsiphash =
 	{ 0x0706050403020100ULL , 0x0f0e0d0c0b0a0908ULL };
 
+static const u32 test_vectors_hsiphash[64] = {
+	0x050fc4dcU, 0x7d57ca93U, 0x4dc7d44dU,
+	0xe7ddf7fbU, 0x88d38328U, 0x49533b67U,
+	0xc59f22a7U, 0x9bb11140U, 0x8d299a8eU,
+	0x6c063de4U, 0x92ff097fU, 0xf94dc352U,
+	0x57b4d9a2U, 0x1229ffa7U, 0xc0f95d34U,
+	0x2a519956U, 0x7d908b66U, 0x63dbd80cU,
+	0xb473e63eU, 0x8d297d1cU, 0xa6cce040U,
+	0x2b45f844U, 0xa320872eU, 0xdae6c123U,
+	0x67349c8cU, 0x705b0979U, 0xca9913a5U,
+	0x4ade3b35U, 0xef6cd00dU, 0x4ab1e1f4U,
+	0x43c5e663U, 0x8c21d1bcU, 0x16a7b60dU,
+	0x7a8ff9bfU, 0x1f2a753eU, 0xbf186b91U,
+	0xada26206U, 0xa3c33057U, 0xae3a36a1U,
+	0x7b108392U, 0x99e41531U, 0x3f1ad944U,
+	0xc8138825U, 0xc28949a6U, 0xfaf8876bU,
+	0x9f042196U, 0x68b1d623U, 0x8b5114fdU,
+	0xdf074c46U, 0x12cc86b3U, 0x0a52098fU,
+	0x9d292f9aU, 0xa2f41f12U, 0x43a71ed0U,
+	0x73f0bce6U, 0x70a7e980U, 0x243c6d75U,
+	0xfdb71513U, 0xa67d8a08U, 0xb7e8f148U,
+	0xf7a644eeU, 0x0f1837f2U, 0x4b6694e0U,
+	0xb7bbb3a8U
+};
+#else
+static const hsiphash_key_t test_key_hsiphash =
+	{ 0x03020100U, 0x07060504U };
+
+static const u32 test_vectors_hsiphash[64] = {
+	0x5814c896U, 0xe7e864caU, 0xbc4b0e30U,
+	0x01539939U, 0x7e059ea6U, 0x88e3d89bU,
+	0xa0080b65U, 0x9d38d9d6U, 0x577999b1U,
+	0xc839caedU, 0xe4fa32cfU, 0x959246eeU,
+	0x6b28096cU, 0x66dd9cd6U, 0x16658a7cU,
+	0xd0257b04U, 0x8b31d501U, 0x2b1cd04bU,
+	0x06712339U, 0x522aca67U, 0x911bb605U,
+	0x90a65f0eU, 0xf826ef7bU, 0x62512debU,
+	0x57150ad7U, 0x5d473507U, 0x1ec47442U,
+	0xab64afd3U, 0x0a4100d0U, 0x6d2ce652U,
+	0x2331b6a3U, 0x08d8791aU, 0xbc6dda8dU,
+	0xe0f6c934U, 0xb0652033U, 0x9b9851ccU,
+	0x7c46fb7fU, 0x732ba8cbU, 0xf142997aU,
+	0xfcc9aa1bU, 0x05327eb2U, 0xe110131cU,
+	0xf9e5e7c0U, 0xa7d708a6U, 0x11795ab1U,
+	0x65671619U, 0x9f5fff91U, 0xd89c5267U,
+	0x007783ebU, 0x95766243U, 0xab639262U,
+	0x9c7e1390U, 0xc368dda6U, 0x38ddc455U,
+	0xfa13d379U, 0x979ea4e8U, 0x53ecd77eU,
+	0x2ee80657U, 0x33dbb66aU, 0xae3f0577U,
+	0x88b4c4ccU, 0x3e7f480bU, 0x74c1ebf8U,
+	0x87178304U
+};
+#endif
+
 static int __init siphash_test_init(void)
 {
 	u8 in[64] __aligned(SIPHASH_ALIGNMENT);
@@ -58,49 +121,75 @@ static int __init siphash_test_init(void)
 	for (i = 0; i < 64; ++i) {
 		in[i] = i;
 		in_unaligned[i + 1] = i;
-		if (siphash(in, i, test_key) != test_vectors[i]) {
-			pr_info("self-test aligned %u: FAIL\n", i + 1);
+		if (siphash(in, i, test_key_siphash) != test_vectors_siphash[i]) {
+			pr_info("siphash self-test aligned %u: FAIL\n", i + 1);
+			ret = -EINVAL;
+		}
+		if (siphash(in_unaligned + 1, i, test_key_siphash) != test_vectors_siphash[i]) {
+			pr_info("siphash self-test unaligned %u: FAIL\n", i + 1);
 			ret = -EINVAL;
 		}
-		if (siphash(in_unaligned + 1, i, test_key) != test_vectors[i]) {
-			pr_info("self-test unaligned %u: FAIL\n", i + 1);
+		if (hsiphash(in, i, test_key_hsiphash) != test_vectors_hsiphash[i]) {
+			pr_info("hsiphash self-test aligned %u: FAIL\n", i + 1);
+			ret = -EINVAL;
+		}
+		if (hsiphash(in_unaligned + 1, i, test_key_hsiphash) != test_vectors_hsiphash[i]) {
+			pr_info("hsiphash self-test unaligned %u: FAIL\n", i + 1);
 			ret = -EINVAL;
 		}
 	}
-	if (siphash_1u64(0x0706050403020100ULL, test_key) != test_vectors[8]) {
-		pr_info("self-test 1u64: FAIL\n");
+	if (siphash_1u64(0x0706050403020100ULL, test_key_siphash) != test_vectors_siphash[8]) {
+		pr_info("siphash self-test 1u64: FAIL\n");
 		ret = -EINVAL;
 	}
-	if (siphash_2u64(0x0706050403020100ULL, 0x0f0e0d0c0b0a0908ULL, test_key) != test_vectors[16]) {
-		pr_info("self-test 2u64: FAIL\n");
+	if (siphash_2u64(0x0706050403020100ULL, 0x0f0e0d0c0b0a0908ULL, test_key_siphash) != test_vectors_siphash[16]) {
+		pr_info("siphash self-test 2u64: FAIL\n");
 		ret = -EINVAL;
 	}
 	if (siphash_3u64(0x0706050403020100ULL, 0x0f0e0d0c0b0a0908ULL,
-			 0x1716151413121110ULL, test_key) != test_vectors[24]) {
-		pr_info("self-test 3u64: FAIL\n");
+			 0x1716151413121110ULL, test_key_siphash) != test_vectors_siphash[24]) {
+		pr_info("siphash self-test 3u64: FAIL\n");
 		ret = -EINVAL;
 	}
 	if (siphash_4u64(0x0706050403020100ULL, 0x0f0e0d0c0b0a0908ULL,
-			 0x1716151413121110ULL, 0x1f1e1d1c1b1a1918ULL, test_key) != test_vectors[32]) {
-		pr_info("self-test 4u64: FAIL\n");
+			 0x1716151413121110ULL, 0x1f1e1d1c1b1a1918ULL, test_key_siphash) != test_vectors_siphash[32]) {
+		pr_info("siphash self-test 4u64: FAIL\n");
 		ret = -EINVAL;
 	}
-	if (siphash_1u32(0x03020100U, test_key) != test_vectors[4]) {
-		pr_info("self-test 1u32: FAIL\n");
+	if (siphash_1u32(0x03020100U, test_key_siphash) != test_vectors_siphash[4]) {
+		pr_info("siphash self-test 1u32: FAIL\n");
 		ret = -EINVAL;
 	}
-	if (siphash_2u32(0x03020100U, 0x07060504U, test_key) != test_vectors[8]) {
-		pr_info("self-test 2u32: FAIL\n");
+	if (siphash_2u32(0x03020100U, 0x07060504U, test_key_siphash) != test_vectors_siphash[8]) {
+		pr_info("siphash self-test 2u32: FAIL\n");
 		ret = -EINVAL;
 	}
 	if (siphash_3u32(0x03020100U, 0x07060504U,
-			 0x0b0a0908U, test_key) != test_vectors[12]) {
-		pr_info("self-test 3u32: FAIL\n");
+			 0x0b0a0908U, test_key_siphash) != test_vectors_siphash[12]) {
+		pr_info("siphash self-test 3u32: FAIL\n");
 		ret = -EINVAL;
 	}
 	if (siphash_4u32(0x03020100U, 0x07060504U,
-			 0x0b0a0908U, 0x0f0e0d0cU, test_key) != test_vectors[16]) {
-		pr_info("self-test 4u32: FAIL\n");
+			 0x0b0a0908U, 0x0f0e0d0cU, test_key_siphash) != test_vectors_siphash[16]) {
+		pr_info("siphash self-test 4u32: FAIL\n");
+		ret = -EINVAL;
+	}
+	if (hsiphash_1u32(0x03020100U, test_key_hsiphash) != test_vectors_hsiphash[4]) {
+		pr_info("hsiphash self-test 1u32: FAIL\n");
+		ret = -EINVAL;
+	}
+	if (hsiphash_2u32(0x03020100U, 0x07060504U, test_key_hsiphash) != test_vectors_hsiphash[8]) {
+		pr_info("hsiphash self-test 2u32: FAIL\n");
+		ret = -EINVAL;
+	}
+	if (hsiphash_3u32(0x03020100U, 0x07060504U,
+			  0x0b0a0908U, test_key_hsiphash) != test_vectors_hsiphash[12]) {
+		pr_info("hsiphash self-test 3u32: FAIL\n");
+		ret = -EINVAL;
+	}
+	if (hsiphash_4u32(0x03020100U, 0x07060504U,
+			  0x0b0a0908U, 0x0f0e0d0cU, test_key_hsiphash) != test_vectors_hsiphash[16]) {
+		pr_info("hsiphash self-test 4u32: FAIL\n");
 		ret = -EINVAL;
 	}
 	if (!ret)
-- 
2.11.0

Re: [PATCH v7 6/6] siphash: implement HalfSipHash1-3 for hash tables

[Andi Kleen]

> 64-bit x86_64:
> [    0.509409] test_siphash:     SipHash2-4 cycles: 4049181
> [    0.510650] test_siphash:     SipHash1-3 cycles: 2512884
> [    0.512205] test_siphash: HalfSipHash1-3 cycles: 3429920
> [    0.512904] test_siphash:    JenkinsHash cycles:  978267

I'm not sure what these numbers mean. Surely a single siphash2-4
does not take 4+ million cycles? 

If you run them in a loop please divide by the iterations.

But generally running small code in a loop is often an unrealistic
benchmark strategy because it hides cache misses, primes
predictors, changes frequencies and changes memory costs,
but also can overload pipelines and oversubscribe
resources.

[see also page 46+ in http://halobates.de/applicative-mental-models.pdf]

So the numbers you get there are at least somewhat
dubious. It would be good to have at least some test which
is not just a tiny micro benchmark to compare before making
conclusions.

-Andi