From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Luis Oliveira <Luis.Oliveira@synopsys.com>,
wsa@the-dreams.de, robh+dt@kernel.org, mark.rutland@arm.com,
jarkko.nikula@linux.intel.com, mika.westerberg@linux.intel.com,
linux-i2c@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Ramiro.Oliveira@synopsys.com, Joao.Pinto@synopsys.com,
CARLOS.PALMINHA@synopsys.com
Subject: Re: [PATCH v5 7/7] i2c: designware: style changes in existing code
Date: Wed, 28 Dec 2016 17:50:23 +0200 [thread overview]
Message-ID: <1482940223.9552.167.camel@linux.intel.com> (raw)
In-Reply-To: <4ff96e7320ebaef28c0ccb47c29bd9a2fe16027c.1482934380.git.lolivei@synopsys.com>
On Wed, 2016-12-28 at 14:43 +0000, Luis Oliveira wrote:
> Replaced all the return variables 'r' in the existing
> code by 'ret' to make the code easier to read (and
> more standard).
I'm not sure it makes sense as a separate change.
>
> Signed-off-by: Luis Oliveira <lolivei@synopsys.com>
> ---
> Changes V4->V5: (Andy Shevchenko)
> - Replaced all the old code using "r" as return to "ret". For
> consistency
> purposes.
>
> drivers/i2c/busses/i2c-designware-master.c | 30 ++++++++++++++----
> -----------
> drivers/i2c/busses/i2c-designware-platdrv.c | 16 +++++++--------
> 2 files changed, 23 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-designware-master.c
> b/drivers/i2c/busses/i2c-designware-master.c
> index b55a7f4c5149..0d5aca6edb48 100644
> --- a/drivers/i2c/busses/i2c-designware-master.c
> +++ b/drivers/i2c/busses/i2c-designware-master.c
> @@ -644,18 +644,18 @@ EXPORT_SYMBOL_GPL(i2c_dw_read_comp_param);
> int i2c_dw_probe(struct dw_i2c_dev *dev)
> {
> struct i2c_adapter *adap = &dev->adapter;
> - int r;
> + int ret;
> u32 reg;
>
> init_completion(&dev->cmd_complete);
>
> - r = i2c_dw_init(dev);
> - if (r)
> - return r;
> + ret = i2c_dw_init(dev);
> + if (ret)
> + return ret;
>
> - r = i2c_dw_acquire_lock(dev);
> - if (r)
> - return r;
> + ret = i2c_dw_acquire_lock(dev);
> + if (ret)
> + return ret;
>
> /*
> * Test if dynamic TAR update is enabled in this controller
> by writing
> @@ -681,13 +681,13 @@ int i2c_dw_probe(struct dw_i2c_dev *dev)
> i2c_set_adapdata(adap, dev);
>
> i2c_dw_disable_int(dev);
> - r = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr,
> + ret = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr,
> IRQF_SHARED | IRQF_COND_SUSPEND,
> dev_name(dev->dev), dev);
> - if (r) {
> + if (ret) {
> dev_err(dev->dev, "failure requesting irq %i: %d\n",
> - dev->irq, r);
> - return r;
> + dev->irq, ret);
> + return ret;
> }
>
> /*
> @@ -697,12 +697,12 @@ int i2c_dw_probe(struct dw_i2c_dev *dev)
> * registered I2C slaves that do I2C transfers in their
> probe.
> */
> pm_runtime_get_noresume(dev->dev);
> - r = i2c_add_numbered_adapter(adap);
> - if (r)
> - dev_err(dev->dev, "failure adding adapter: %d\n", r);
> + ret = i2c_add_numbered_adapter(adap);
> + if (ret)
> + dev_err(dev->dev, "failure adding adapter: %d\n",
> ret);
> pm_runtime_put_noidle(dev->dev);
>
> - return r;
> + return ret;
> }
> EXPORT_SYMBOL_GPL(i2c_dw_probe);
>
> diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c
> b/drivers/i2c/busses/i2c-designware-platdrv.c
> index ef75031f8a62..785f4380c9a9 100644
> --- a/drivers/i2c/busses/i2c-designware-platdrv.c
> +++ b/drivers/i2c/busses/i2c-designware-platdrv.c
> @@ -234,7 +234,7 @@ static int dw_i2c_plat_probe(struct
> platform_device *pdev)
> struct fwnode_handle *child;
> u32 acpi_speed, ht = 0;
> struct resource *mem;
> - int irq, r;
> + int irq, ret;
> u32 reg;
>
> irq = platform_get_irq(pdev, 0);
> @@ -293,9 +293,9 @@ static int dw_i2c_plat_probe(struct
> platform_device *pdev)
> return -EINVAL;
> }
>
> - r = i2c_dw_eval_lock_support(dev);
> - if (r)
> - return r;
> + ret = i2c_dw_eval_lock_support(dev);
> + if (ret)
> + return ret;
>
> if (ACPI_HANDLE(&pdev->dev) == NULL) {
> device_for_each_child_node(&pdev->dev, child) {
> @@ -336,14 +336,14 @@ static int dw_i2c_plat_probe(struct
> platform_device *pdev)
> }
>
> if (dev->mode == DW_IC_SLAVE)
> - r = i2c_dw_probe_slave(dev);
> + ret = i2c_dw_probe_slave(dev);
> else
> - r = i2c_dw_probe(dev);
> + ret = i2c_dw_probe(dev);
>
> - if (r && !dev->pm_runtime_disabled)
> + if (ret && !dev->pm_runtime_disabled)
> pm_runtime_disable(&pdev->dev);
>
> - return r;
> + return ret;
> }
>
> static int dw_i2c_plat_remove(struct platform_device *pdev)
--
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy
prev parent reply other threads:[~2016-12-28 15:53 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-28 14:43 [PATCH v5 0/7] i2c: designware: add I2C SLAVE support Luis Oliveira
2016-12-28 14:43 ` [PATCH v5 1/7] i2c: designware: Cleaning and comment style fixes Luis Oliveira
2016-12-28 14:43 ` [PATCH v5 2/7] i2c: designware: refactoring of the i2c-designware Luis Oliveira
2016-12-28 15:12 ` Andy Shevchenko
2016-12-28 15:30 ` Luis Oliveira
2016-12-28 14:43 ` [PATCH v5 3/7] i2c: designware: MASTER mode as separated driver Luis Oliveira
2016-12-28 14:43 ` [PATCH v5 4/7] i2c: designware: introducing I2C_SLAVE definitions Luis Oliveira
2016-12-28 15:17 ` Andy Shevchenko
2016-12-28 14:43 ` [PATCH v5 5/7] i2c: designware: add SLAVE mode functions Luis Oliveira
2016-12-28 15:36 ` Andy Shevchenko
2016-12-28 16:00 ` Luis Oliveira
2016-12-31 23:45 ` kbuild test robot
2016-12-28 14:43 ` [PATCH v5 6/7] i2c: designware: enable SLAVE in platform module Luis Oliveira
2016-12-28 15:44 ` Andy Shevchenko
2016-12-28 15:53 ` Luis Oliveira
2016-12-28 16:31 ` Andy Shevchenko
2016-12-28 16:41 ` Luis Oliveira
2016-12-28 16:49 ` Carlos Palminha
2016-12-28 17:10 ` Andy Shevchenko
2016-12-28 18:10 ` Luis Oliveira
2017-01-05 12:13 ` Luis Oliveira
2017-01-05 12:43 ` Andy Shevchenko
2016-12-28 14:43 ` [PATCH v5 7/7] i2c: designware: style changes in existing code Luis Oliveira
2016-12-28 15:50 ` Andy Shevchenko [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1482940223.9552.167.camel@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=CARLOS.PALMINHA@synopsys.com \
--cc=Joao.Pinto@synopsys.com \
--cc=Luis.Oliveira@synopsys.com \
--cc=Ramiro.Oliveira@synopsys.com \
--cc=devicetree@vger.kernel.org \
--cc=jarkko.nikula@linux.intel.com \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mika.westerberg@linux.intel.com \
--cc=robh+dt@kernel.org \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).