linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lin Huang <hl@rock-chips.com>
To: dmitry.torokhov@gmail.com, jikos@kernel.org, robh@kernel.org
Cc: benjamin.tissoires@redhat.com, jani.nikula@intel.com,
	linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
	briannorris@chromium.org, devicetree@vger.kernel.org,
	Lin Huang <hl@rock-chips.com>
Subject: [PATCH v2 1/2] HID: i2c-hid: add reset gpio property
Date: Tue, 31 Oct 2017 11:03:15 +0800	[thread overview]
Message-ID: <1509418996-25348-1-git-send-email-hl@rock-chips.com> (raw)

some i2c hid devices have reset gpio, need to control
it in the driver.

Signed-off-by: Lin Huang <hl@rock-chips.com>
---
Changes in v2:
- Add 10us in usleep_range() upper range
- reuse post_power_delay_ms as deassert reset delay
- delete deassert_reset_us property

 drivers/hid/i2c-hid/i2c-hid.c         | 61 +++++++++++++++++++++++++++--------
 include/linux/platform_data/i2c-hid.h |  3 ++
 2 files changed, 50 insertions(+), 14 deletions(-)

diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c
index 9145c21..9f06135 100644
--- a/drivers/hid/i2c-hid/i2c-hid.c
+++ b/drivers/hid/i2c-hid/i2c-hid.c
@@ -38,6 +38,7 @@
 #include <linux/mutex.h>
 #include <linux/acpi.h>
 #include <linux/of.h>
+#include <linux/gpio/consumer.h>
 #include <linux/regulator/consumer.h>
 
 #include <linux/platform_data/i2c-hid.h>
@@ -793,6 +794,35 @@ struct hid_ll_driver i2c_hid_ll_driver = {
 };
 EXPORT_SYMBOL_GPL(i2c_hid_ll_driver);
 
+static int i2c_hid_hw_power_on(struct i2c_hid *ihid)
+{
+	int ret;
+
+	ret = regulator_enable(ihid->pdata.supply);
+	if (ret < 0)
+		return ret;
+
+	gpiod_set_value_cansleep(ihid->pdata.reset_gpio, 1);
+	if (ihid->pdata.assert_reset_us)
+		usleep_range(ihid->pdata.assert_reset_us,
+			     ihid->pdata.assert_reset_us + 10);
+
+	gpiod_set_value_cansleep(ihid->pdata.reset_gpio, 0);
+
+	/* use for power supply delay or reset deassert delay */
+	if (ihid->pdata.post_power_delay_ms)
+		msleep(ihid->pdata.post_power_delay_ms);
+
+	return ret;
+}
+
+static int i2c_hid_hw_power_off(struct i2c_hid *ihid)
+{
+	gpiod_set_value_cansleep(ihid->pdata.reset_gpio, 1);
+
+	return regulator_disable(ihid->pdata.supply);
+}
+
 static int i2c_hid_init_irq(struct i2c_client *client)
 {
 	struct i2c_hid *ihid = i2c_get_clientdata(client);
@@ -934,6 +964,9 @@ static int i2c_hid_of_probe(struct i2c_client *client,
 	if (!ret)
 		pdata->post_power_delay_ms = val;
 
+	of_property_read_u32(dev->of_node, "assert-reset-us",
+			     &pdata->assert_reset_us);
+
 	return 0;
 }
 
@@ -1002,14 +1035,16 @@ static int i2c_hid_probe(struct i2c_client *client,
 		goto err;
 	}
 
-	ret = regulator_enable(ihid->pdata.supply);
+	ihid->pdata.reset_gpio = devm_gpiod_get_optional(&client->dev, "reset",
+							 GPIOD_OUT_HIGH);
+	if (IS_ERR(ihid->pdata.reset_gpio))
+		goto err;
+
+	ret = i2c_hid_hw_power_on(ihid);
 	if (ret < 0) {
-		dev_err(&client->dev, "Failed to enable regulator: %d\n",
-			ret);
+		dev_err(&client->dev, "Failed to power on: %d\n", ret);
 		goto err;
 	}
-	if (ihid->pdata.post_power_delay_ms)
-		msleep(ihid->pdata.post_power_delay_ms);
 
 	i2c_set_clientdata(client, ihid);
 
@@ -1086,7 +1121,7 @@ static int i2c_hid_probe(struct i2c_client *client,
 	pm_runtime_disable(&client->dev);
 
 err_regulator:
-	regulator_disable(ihid->pdata.supply);
+	i2c_hid_hw_power_off(ihid);
 
 err:
 	i2c_hid_free_buffers(ihid);
@@ -1112,8 +1147,7 @@ static int i2c_hid_remove(struct i2c_client *client)
 	if (ihid->bufsize)
 		i2c_hid_free_buffers(ihid);
 
-	regulator_disable(ihid->pdata.supply);
-
+	i2c_hid_hw_power_off(ihid);
 	kfree(ihid);
 
 	return 0;
@@ -1165,9 +1199,10 @@ static int i2c_hid_suspend(struct device *dev)
 			hid_warn(hid, "Failed to enable irq wake: %d\n",
 				wake_status);
 	} else {
-		ret = regulator_disable(ihid->pdata.supply);
+		ret = i2c_hid_hw_power_off(ihid);
 		if (ret < 0)
-			hid_warn(hid, "Failed to disable supply: %d\n", ret);
+			hid_warn(hid, "Failed to disable hw power: %d\n",
+				 ret);
 	}
 
 	return 0;
@@ -1182,11 +1217,9 @@ static int i2c_hid_resume(struct device *dev)
 	int wake_status;
 
 	if (!device_may_wakeup(&client->dev)) {
-		ret = regulator_enable(ihid->pdata.supply);
+		ret = i2c_hid_hw_power_on(ihid);
 		if (ret < 0)
-			hid_warn(hid, "Failed to enable supply: %d\n", ret);
-		if (ihid->pdata.post_power_delay_ms)
-			msleep(ihid->pdata.post_power_delay_ms);
+			hid_warn(hid, "Failed to enable hw power: %d\n", ret);
 	} else if (ihid->irq_wake_enabled) {
 		wake_status = disable_irq_wake(client->irq);
 		if (!wake_status)
diff --git a/include/linux/platform_data/i2c-hid.h b/include/linux/platform_data/i2c-hid.h
index 1fb0882..40f1840 100644
--- a/include/linux/platform_data/i2c-hid.h
+++ b/include/linux/platform_data/i2c-hid.h
@@ -14,6 +14,7 @@
 
 #include <linux/types.h>
 
+struct gpio_desc;
 struct regulator;
 
 /**
@@ -37,6 +38,8 @@ struct i2c_hid_platform_data {
 	u16 hid_descriptor_address;
 	struct regulator *supply;
 	int post_power_delay_ms;
+	struct gpio_desc *reset_gpio;
+	int assert_reset_us;
 };
 
 #endif /* __LINUX_I2C_HID_H */
-- 
2.7.4

             reply	other threads:[~2017-10-31  3:03 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-31  3:03 Lin Huang [this message]
2017-10-31  3:03 ` [PATCH v2 2/2] devicetree: i2c-hid: Add reset property Lin Huang
2017-11-01 22:02   ` Rob Herring
2017-11-06  9:06     ` Benjamin Tissoires
2017-11-06 16:10       ` Dmitry Torokhov
2017-11-04  4:35   ` Brian Norris
2017-11-06  1:00     ` hl
2017-10-31  8:47 ` [PATCH v2 1/2] HID: i2c-hid: add reset gpio property Jani Nikula
2017-11-04  2:29 ` Brian Norris

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1509418996-25348-1-git-send-email-hl@rock-chips.com \
    --to=hl@rock-chips.com \
    --cc=benjamin.tissoires@redhat.com \
    --cc=briannorris@chromium.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=jani.nikula@intel.com \
    --cc=jikos@kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).