From: Jani Nikula <jani.nikula@intel.com>
To: Lin Huang <hl@rock-chips.com>,
dmitry.torokhov@gmail.com, jikos@kernel.org, robh@kernel.org
Cc: benjamin.tissoires@redhat.com, linux-input@vger.kernel.org,
linux-kernel@vger.kernel.org, briannorris@chromium.org,
devicetree@vger.kernel.org, Lin Huang <hl@rock-chips.com>
Subject: Re: [PATCH v2 1/2] HID: i2c-hid: add reset gpio property
Date: Tue, 31 Oct 2017 10:47:45 +0200 [thread overview]
Message-ID: <87k1zbema6.fsf@intel.com> (raw)
In-Reply-To: <1509418996-25348-1-git-send-email-hl@rock-chips.com>
On Tue, 31 Oct 2017, Lin Huang <hl@rock-chips.com> wrote:
> some i2c hid devices have reset gpio, need to control
> it in the driver.
So I have Reviewed-by and Acked-by on *one* commit touching the files
being changed here. get_maintainer.pl is clueless, and you shouldn't use
its output verbatim.
BR,
Jani.
> Signed-off-by: Lin Huang <hl@rock-chips.com>
> ---
> Changes in v2:
> - Add 10us in usleep_range() upper range
> - reuse post_power_delay_ms as deassert reset delay
> - delete deassert_reset_us property
>
> drivers/hid/i2c-hid/i2c-hid.c | 61 +++++++++++++++++++++++++++--------
> include/linux/platform_data/i2c-hid.h | 3 ++
> 2 files changed, 50 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c
> index 9145c21..9f06135 100644
> --- a/drivers/hid/i2c-hid/i2c-hid.c
> +++ b/drivers/hid/i2c-hid/i2c-hid.c
> @@ -38,6 +38,7 @@
> #include <linux/mutex.h>
> #include <linux/acpi.h>
> #include <linux/of.h>
> +#include <linux/gpio/consumer.h>
> #include <linux/regulator/consumer.h>
>
> #include <linux/platform_data/i2c-hid.h>
> @@ -793,6 +794,35 @@ struct hid_ll_driver i2c_hid_ll_driver = {
> };
> EXPORT_SYMBOL_GPL(i2c_hid_ll_driver);
>
> +static int i2c_hid_hw_power_on(struct i2c_hid *ihid)
> +{
> + int ret;
> +
> + ret = regulator_enable(ihid->pdata.supply);
> + if (ret < 0)
> + return ret;
> +
> + gpiod_set_value_cansleep(ihid->pdata.reset_gpio, 1);
> + if (ihid->pdata.assert_reset_us)
> + usleep_range(ihid->pdata.assert_reset_us,
> + ihid->pdata.assert_reset_us + 10);
> +
> + gpiod_set_value_cansleep(ihid->pdata.reset_gpio, 0);
> +
> + /* use for power supply delay or reset deassert delay */
> + if (ihid->pdata.post_power_delay_ms)
> + msleep(ihid->pdata.post_power_delay_ms);
> +
> + return ret;
> +}
> +
> +static int i2c_hid_hw_power_off(struct i2c_hid *ihid)
> +{
> + gpiod_set_value_cansleep(ihid->pdata.reset_gpio, 1);
> +
> + return regulator_disable(ihid->pdata.supply);
> +}
> +
> static int i2c_hid_init_irq(struct i2c_client *client)
> {
> struct i2c_hid *ihid = i2c_get_clientdata(client);
> @@ -934,6 +964,9 @@ static int i2c_hid_of_probe(struct i2c_client *client,
> if (!ret)
> pdata->post_power_delay_ms = val;
>
> + of_property_read_u32(dev->of_node, "assert-reset-us",
> + &pdata->assert_reset_us);
> +
> return 0;
> }
>
> @@ -1002,14 +1035,16 @@ static int i2c_hid_probe(struct i2c_client *client,
> goto err;
> }
>
> - ret = regulator_enable(ihid->pdata.supply);
> + ihid->pdata.reset_gpio = devm_gpiod_get_optional(&client->dev, "reset",
> + GPIOD_OUT_HIGH);
> + if (IS_ERR(ihid->pdata.reset_gpio))
> + goto err;
> +
> + ret = i2c_hid_hw_power_on(ihid);
> if (ret < 0) {
> - dev_err(&client->dev, "Failed to enable regulator: %d\n",
> - ret);
> + dev_err(&client->dev, "Failed to power on: %d\n", ret);
> goto err;
> }
> - if (ihid->pdata.post_power_delay_ms)
> - msleep(ihid->pdata.post_power_delay_ms);
>
> i2c_set_clientdata(client, ihid);
>
> @@ -1086,7 +1121,7 @@ static int i2c_hid_probe(struct i2c_client *client,
> pm_runtime_disable(&client->dev);
>
> err_regulator:
> - regulator_disable(ihid->pdata.supply);
> + i2c_hid_hw_power_off(ihid);
>
> err:
> i2c_hid_free_buffers(ihid);
> @@ -1112,8 +1147,7 @@ static int i2c_hid_remove(struct i2c_client *client)
> if (ihid->bufsize)
> i2c_hid_free_buffers(ihid);
>
> - regulator_disable(ihid->pdata.supply);
> -
> + i2c_hid_hw_power_off(ihid);
> kfree(ihid);
>
> return 0;
> @@ -1165,9 +1199,10 @@ static int i2c_hid_suspend(struct device *dev)
> hid_warn(hid, "Failed to enable irq wake: %d\n",
> wake_status);
> } else {
> - ret = regulator_disable(ihid->pdata.supply);
> + ret = i2c_hid_hw_power_off(ihid);
> if (ret < 0)
> - hid_warn(hid, "Failed to disable supply: %d\n", ret);
> + hid_warn(hid, "Failed to disable hw power: %d\n",
> + ret);
> }
>
> return 0;
> @@ -1182,11 +1217,9 @@ static int i2c_hid_resume(struct device *dev)
> int wake_status;
>
> if (!device_may_wakeup(&client->dev)) {
> - ret = regulator_enable(ihid->pdata.supply);
> + ret = i2c_hid_hw_power_on(ihid);
> if (ret < 0)
> - hid_warn(hid, "Failed to enable supply: %d\n", ret);
> - if (ihid->pdata.post_power_delay_ms)
> - msleep(ihid->pdata.post_power_delay_ms);
> + hid_warn(hid, "Failed to enable hw power: %d\n", ret);
> } else if (ihid->irq_wake_enabled) {
> wake_status = disable_irq_wake(client->irq);
> if (!wake_status)
> diff --git a/include/linux/platform_data/i2c-hid.h b/include/linux/platform_data/i2c-hid.h
> index 1fb0882..40f1840 100644
> --- a/include/linux/platform_data/i2c-hid.h
> +++ b/include/linux/platform_data/i2c-hid.h
> @@ -14,6 +14,7 @@
>
> #include <linux/types.h>
>
> +struct gpio_desc;
> struct regulator;
>
> /**
> @@ -37,6 +38,8 @@ struct i2c_hid_platform_data {
> u16 hid_descriptor_address;
> struct regulator *supply;
> int post_power_delay_ms;
> + struct gpio_desc *reset_gpio;
> + int assert_reset_us;
> };
>
> #endif /* __LINUX_I2C_HID_H */
--
Jani Nikula, Intel Open Source Technology Center
next prev parent reply other threads:[~2017-10-31 8:48 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-31 3:03 [PATCH v2 1/2] HID: i2c-hid: add reset gpio property Lin Huang
2017-10-31 3:03 ` [PATCH v2 2/2] devicetree: i2c-hid: Add reset property Lin Huang
2017-11-01 22:02 ` Rob Herring
2017-11-06 9:06 ` Benjamin Tissoires
2017-11-06 16:10 ` Dmitry Torokhov
2017-11-04 4:35 ` Brian Norris
2017-11-06 1:00 ` hl
2017-10-31 8:47 ` Jani Nikula [this message]
2017-11-04 2:29 ` [PATCH v2 1/2] HID: i2c-hid: add reset gpio property Brian Norris
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87k1zbema6.fsf@intel.com \
--to=jani.nikula@intel.com \
--cc=benjamin.tissoires@redhat.com \
--cc=briannorris@chromium.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=hl@rock-chips.com \
--cc=jikos@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).